how to make a calming twisted pendant diy jewelry making tutorial

How to Make:Calming Twisted Pendant

Materials1.7” Bead Stringing Wire1 Stone Bead (Size 10mm)3 Metal Beads (Size 2mm, 3mm, & 4mm)Wire CuttersChain Nose Pliers

Step 1:Take wire and bend it like on the photo, then put the stone bead onto the middle of it.

Step 2:Wrap wire around the bead as shown on the photo .

Step 3:Squeeze your wires together a little bit so that they are almost touching one another.

Step 4:Put copper bead onto both wires, then trim one wire, and put other metal beads onto the wire which is left.

Step 5:Shape the wire in the loop as shown on the photo, trim the wire if you need to.

Step 6:Add chain to the pendant and your necklace is ready to wear!

Design