how to install f1 driver - the ramé-hart instrument co. · ramé-hart instrument co. page 8 how to...
Post on 10-Oct-2020
8 Views
Preview:
TRANSCRIPT
ramé-hart instrument co.
How to Install the FOcontrol Driver
for any F1 Series System
ramé-hart instrument co.
PO Box 400
Netcong, NJ 07857-0400
USA ph 973-448-0305
fx 973-448-0315
www.ramehart.com
ramé-hart instrument co. page 2 How to Install FOcontrol Driver
1. First, locate the FOcontrol_Install file which is located in the C:\ramehart.cd folder. If the file is not there, you can locate it on
the CD which was supplied with your system.
2. Run the program by double clicking on it. If you are prompted to allow access to the program by Windows, click on Allow.
3. You will have a welcome to InstallShield Wizard for FOcontrol
screen. Click Next as shown below.
ramé-hart instrument co. page 3 How to Install FOcontrol Driver
4. Accept terms if the license agreement. Click Next as shown below.
ramé-hart instrument co. page 4 How to Install FOcontrol Driver
5. Type in your name and company name. Click Next
ramé-hart instrument co. page 5 How to Install FOcontrol Driver
6. For Setup Type Chose Complete. Click Next
ramé-hart instrument co. page 6 How to Install FOcontrol Driver
7. Click Install
ramé-hart instrument co. page 7 How to Install FOcontrol Driver
8. Click Finish
9. You should now have a FOcontrol Icon on your desktop. (Do
not click on this.)
ramé-hart instrument co. page 8 How to Install FOcontrol Driver
10. Next, plug in your FOculus camera. An icon will appear in the
lower right corner of the screen and the following screen will pop up. Chose Locate and Install Driver Software. Click Continue.
ramé-hart instrument co. page 9 How to Install FOcontrol Driver
11. The following message will appear. Click Close.
12. Click Start > Control Panel > Device Manager. If prompted to allow access to the program by Windows, click Continue
ramé-hart instrument co. page 10 How to Install FOcontrol Driver
13. Click on Start > Control Panel.
14. Click on Device Manger and “Continue” if prompt.
15. Choose NET GmbH FO124SB > right click and choose Update
Software Driver.
ramé-hart instrument co. page 11 How to Install FOcontrol Driver
16. Choose Browse my computer for Driver Software.
ramé-hart instrument co. page 12 How to Install FOcontrol Driver
17. Click Browse
ramé-hart instrument co. page 13 How to Install FOcontrol Driver
18. Scrolls down and click on Computer.
ramé-hart instrument co. page 14 How to Install FOcontrol Driver
19. Click on OS (C:)
ramé-hart instrument co. page 15 How to Install FOcontrol Driver
20. Click Program Files
ramé-hart instrument co. page 16 How to Install FOcontrol Driver
21. Scroll down and choose NET GmbH
ramé-hart instrument co. page 17 How to Install FOcontrol Driver
22. Choose Device Driver and click Ok
ramé-hart instrument co. page 18 How to Install FOcontrol Driver
23. Click Next
ramé-hart instrument co. page 19 How to Install FOcontrol Driver
24. The following message may appear. If it does, choose Install
this driver software anyway.
ramé-hart instrument co. page 20 How to Install FOcontrol Driver
25. Click Close
ramé-hart instrument co. page 21 How to Install FOcontrol Driver
26. Right click on NET GmbH1394 Digital Camera and click on
Properties.
ramé-hart instrument co. page 22 How to Install FOcontrol Driver
27. If the installation was successful, it will read “This device is
working properly” under the Device Status section of the General tab. Click OK to close.
Congratulations.
top related