how to avoid epoxy floor failure
Post on 26-Jun-2015
1.144 Views
Preview:
DESCRIPTION
TRANSCRIPT
www.flowcrete.com
how to avoidresin floor failure
resin flooring systems deliver a host of performance benefits
www.flowcrete.com
excellent strength, lifecycle cost savings, high chemical & slip resistance as well as an enhanced hygiene profile
www.flowcrete.com
but sometimes… things can go wrong
www.flowcrete.com
new
so what steps can you take to prevent your brand spanking new floor from failing?
www.flowcrete.com
firstly... always and i mean always, use an applicator approved or licensed by the flooring manufacturer
www.flowcrete.com
this will ensure the most professional finish for your new floor
www.flowcrete.com
next, it’s all about the substrate preparation… the only alternative is failure
www.flowcrete.com
apply resin systems to a strong, well prepared substrate for a floor with lasting integrity
www.flowcrete.com
if you’re working with newly laid concrete, you’ll need to ensure all laitance is removed
www.flowcrete.com
the substrate must be clean, dry & free from dust, oils, grease & other residue…
www.flowcrete.com
any old, de-bonded, loose or flaking resin must be also be removed
www.flowcrete.com
this may require vacuum assisted shot blasting, diamond grinding, or scarification
www.flowcrete.com
but this has to be done to ensure proper adhesion between the substrate & new resin finish
www.flowcrete.com
if your substrate is damp, on or below grade, or has been newly laid you may need to apply a surface damp proof membrane
www.flowcrete.com
this will prevent the finished floor from blistering or delaminating as a result of rising moisture at a later stage
www.flowcrete.com
you will also need to apply the appropriate primer prior to the installation of the resin finish
www.flowcrete.com
again to ensure a long-lasting, well-bonded & durable finish
www.flowcrete.com
if you think your substrate might be weak or poor quality, you may have to first apply a screed layer
www.flowcrete.com
this will ensure a sound, level surface suitable for installation of resin floor finishes
www.flowcrete.com
finally, you’ll need to think about regulating your installation conditions
www.flowcrete.com
mixing the materials in the right way, under the right conditions can make a world of difference
www.flowcrete.com
preventing external contamination during installation & cure is also a must
www.flowcrete.com
this will prevent incurring considerable delays & financial penalties
www.flowcrete.com
but most important…don’t forget the golden rule!
www.flowcrete.com
always use a well-informed, highly-skilled & manufacturer-approved application team
www.flowcrete.com
www.flowcrete.com
to discuss how flowcrete can help to ensure you receive a long lasting floor finish
www.flowcrete.com
give us a call
+44 (0) 1270 753 000
www.flowcrete.com
send us an email
contact@flowcrete.com
drop us a tweet
@flowcrete
www.flowcreteaustralia.com.au
www.flowcrete.com
or fill in the contact form online
top related