hazardous area - enclosures and equipment product...
Post on 06-Feb-2018
221 Views
Preview:
TRANSCRIPT
PROCESS AUTOMATIONPROCESS AUTOMATION
HAzARdOUS AREAHAzARdOUS AREAENClOSURES ANd EqUIPMENTPROdUCT OvERvIEw
CONTENTS
P. 14lIgHTINg
P. 17PORTAblE lIgHTINg
P. 18SIgNAllINg
P. 20PlUgS ANd SOCkETS
P. 21SySTEMS
P. 22ENgINEEREdSOlUTIONS
P. 04TERMINAl JUNCTION bOxES
P. 08lOCAl CONTROl
P. 10CUSTOMIzEd CONTROl PANElS
P. 11POwER SwITCHINg
P. 12MOTOR STARTERS
P. 13dISTRIbUTION bOARdS
2
Hazardous Area Enclosures and Equipment products are based around enclosures in the increased safety, intrinsic safety and flameproof protection classes with approvals for the integration of a wide range of electrical apparatus. Enclosures are available in a variety of materials, such as stainless and mild steel, glass reinforced polyester, aluminium, and cast iron. All product ranges are certified for use as a combination if more complex system solutions are required. In addition to the enclosures other product ranges include lighting, signalling equipment and emergency shutdown equipment.
The specialists of the Pepperl+Fuchs project engineering group possess many years of experience in designing cabinets and control panels which meet the requirements of any process automation application. Being a leader in explosion protection technologies, Pepperl+Fuchs offers a huge variety of control interface components such as isolated barriers, remote I/O systems, HART interface solutions and fieldbus infrastructure systems. All these components, and many more, we combine into cabinet solutions tailored exactly to your requirements.
In 2009, with the acquisition of Walsall Ltd., Pepperl+Fuchs strengthened its competence in solutions for hazardous areas by integrating Walsall’s more than 100 years of experience in mechanical explosion protection into our product portfolio.
INTROdUCTION
ENd-USERS ANd INSTAllERS OF OUR EqUIPMENTShell, BP, Chevron, Agip, Maersk Oil & Gas, Elf, NIGC, IOEC, NIOC, Pfizer, Glaxo, Petrobras, Woodside, ADNOC, GASCO, ZADCO, Saudi Aramco, Texaco, Aker-Kvaerner, Costain, Conoco Philips, ABB, KBR, Bechtel, PFD, Snamprogetti, Cegelec, Technip, Mustang Engineering, Petronas, Marathon Oil & Gas, Transco, BNFL, London Underground, Virgin, Ikea, British Sugar, BAE Systems, Airbus, Lufthansa, British Airways, Air France, Petrofac, Wood Group, Tyco, National Grid, Diageo
CERTIFICATIONAll products are certified by the British Notified Bodies, Baseefa and SIRA, with the manufacturing facility being ISO 9001:2008 approved and ATEX / IECEx notification being held. Current certifications include ATEX, GOST & IECEx with INMETRO in progress.
Hazardous Area Enclosures and Equipment
3
4
TERMINAl JUNCTION bOxES
Fxl RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GD, and II 1 GDn Certification: Ex e IIC T6/5/4/3 Gb,
Ex tb IIIC T80/95/130/160 °C Db, Ex ia IIC T6/5/4/3 Ga, Ex tb IIIC T80/95/130/160 °C Da
n Ambient temperature range -50 °C to +120 °Cn IP66/67 to EN 60529:1992n Electropolished 1.5 mm316L Stainless Steel or powder coated Mild Steel boxn 0 – 4 Electropolished 3 mm 316L Stainless Steel or powder coated Mild Steel gland platesn Sizes ranging from 229 mm x 152 mm x 130 mm to 1177 mm x 777 mm x 210/300 mmn 4 External mounting feetn Padlockable hasp as an optionn Return flange rain channeln Concealed hinges
TERMINAl ENClOSURES wITH RAIN CHANNEl
Sl RANgE FEATURES
n Zone 1, 2, 21, 22n II 2 GD and II 1 GDn Certification: Ex e IIC T6/5/4/3 Gb,
Ex tb IIIC T80/95/130/160 °C Db, Ex ia IIC T6/5/4/3 Ga, Ex tb IIIC T80/95/130/160 °C Da
n Ambient temperature range -50 °C to +120 °Cn IP66 to EN 60529:1992n Electropolished 1.5 mm 316L Stainless Steel or Powder coated (RAL 7032) 3 mm mild steeln Sizes ranging from 110 mm x 110 mm x 65 mm to 190 mm x 190 mm x 100 mmn 2 External mounting feet
SMAll TERMINAl ENClOSURES
5
xlx RANgE FEATURESn Zone 1, 2n II 2 Gn Certification: Ex e IIC T3/4/5/6 Gb,
Ex tb IIIC T80/95/130/160 °C Db, Ex ia IIC T3/4/5/6 Ga, Ex tb IIIC T80/95/130/160 °C Da
n Ambient temperature range -50 °C to +120 °Cn IP55 to EN 60529:1992n Electropolished 1.5 mm 316L Stainless Steel or powder coated Mild Steel boxn 0 – 4 Electropolished 3 mm 316L Stainless Steel or powder
coated Mild Steel gland platesn 4 – 6 External mounting feetn Padlockable hasp
ExTRA lARgE TERMINAl ENClOSURES
bESPOkE TERMINAl ENClOSURESFxl RANgE FEATURES
n Zone 1, 2, 21, 22n II 2 GDn Certification: Ex e IIC T6/5/4/3 Gb,
Ex tb IIIC T80/95/130/160 °C Db, Ex ia IIC T6/5/4/3 Ga, Ex tb IIIC T80/95/130/160 °C Da
n Ambient temperature range -50 °C to +120 °Cn IP66 to EN 60529:1992n Electropolished 1.5 mm 316L Stainless Steel or powder coated Mild Steel boxn 0 – 4 Electropolished 3 mm 316L Stainless Steel or powder coated Mild Steel gland platesn Any sizes on request up to 2000 mm x 1250 mm x 600 mmn 4 or 6 External mounting feetn Padlockable hasp as an optionn Return flange rain channeln Concealed hinges
gl RANgE FEATURES
n Zone 1, 2, 21, 22n II 2 GD and II 1 GDn Certification: Ex e IIC T4/5/6 Gb,
Ex tb IIIC T80/95/130 °C Db, Ex ia IIC T4/5/6 Ga, Ex tb IIIC T80/95/130 °C Da
n Ambient temperature range -40 °C to +60 °Cn IP66 to EN 60529:1992n Black moulded finish as standard, other colours are available on request including red, yellow and bluen Sizes ranging from 75 mm x 80 mm x 55 mm to 405 mm x 400 mm x 200 mmn Concealed mounting holes
gRP TERMINAl ENClOSURES
6
TERMINAl JUNCTION bOxES
gvU JUNCTION bOx FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex e IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -40 °C to +50 °Cn IP66 to EN 60529:1992n Black moulded finishn 110 mm x 110 mm x 65 mmn 2 x external mounting lugsn Pillar terminal optionn MK terminal option
HEAvy dUTy gRP JUNCTION bOxES
ASMT RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5 Gb, Ex tb IIIC T87 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n Available in Cast Iron, Cast Aluminium or Cast Stainless Steeln Available in 3 sizes: ASM130: 210 mm x 185 mm x 152 mm, ASM150: 335 mm x 310 mm x 200 mm, ASM170: 560 mm x 560 mm x 245 mmn External mounting straps supplied as standard
FlAMEPROOF TERMINAl ENClOSURES
7
E RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: E115: Ex d IIC T4/6 Gb, Ex tb IIIC T130/80 °C Db, E210: EEx d IIB T5, E220: EEx d IIB T5n Ambient temperature range: E115: -40 °C to +55 °C, E210: -20 °C to +55 °C, E220: -20 °C to +55 °Cn IP66 to EN 60529:1992/IP6X for E210 & E220n Powder coated cast ironn Available in 3 sizes: E115: 117 mm x 117 mm x 70 mm, E210: 145 mm x 106 mm x 65 mm, E220: 104 mm diameter x 57.5 mm n 2 External mounting feet
FlAMEPROOF JUNCTION bOxES
Hvb FEATURESn 6.6 kV max operating voltagen 650 A max operating currentn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex e IIC T6 Gb, Ex tb IIIC T85 °C Db, Ex e IIC T4 Gb (with anticondensation heater fitted), Ex tb IIIC T135 °C Dbn Ambient temperature range -50 °C to +55 °Cn IP66 to EN 60529:1992n Electropolished 1.5 mm 316 L Stainless Steel n 0 – 4 Electropolished 3 mm 316 L Stainless Steel or powder coated Mild Steel gland platesn 4 External mounting feetn Padlockable hasp as standard
HIgH vOlTAgE TERMINAl ENClOSURE
8
lOCAl CONTROl IN gRP
lCP100 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -20 °C to +55 °C
-40 °C when used with a plug and gland rated to -40 °Cn IP66 to EN 60529:1992n Carbon loaded anti-static glass reinforced polyestern Enclosure size: 110 mm x 110 mm x 99 mmn 2 x External mounting lugs
SINglE FUNCTION lOCAl CONTROl
lCP200 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T6 Gb,
Ex tb IIIC T85 °C Dbn Ambient temperature range -20 °C to +55 °C
-40 °C when used with a plug and gland rated to -40 °Cn IP66 to EN 60529:1992n Carbon loaded anti-static glass reinforced polyestern Enclosure size: 110 mm x 220 mm x 99 mmn 2 x External mounting lugs
2 FUNCTION lOCAl CONTROl
lCP300 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -20 °C to +55 °C
-40 °C when used with a plug and gland rated to -40 °Cn IP66 to EN 60529:1992n Carbon loaded anti-static glass reinforced polyestern Enclosure size: 110 mm x 220 mm x 99 mmn 2 x External mounting lugs
3 FUNCTION lOCAl CONTROl
9
lOCAl CONTROl IN STAINlESS STEEl
lCS100 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T5 Gb, Ex tb IIIC T95 °C Dbn Ambient temperature range -20 °C to +50 °C
-40 °C when used with a plug and gland rated to -40 °Cn IP66 to EN 60529:1992n LCS – Electropolished 1.5 mm 316 L Stainless Steeln Enclosure size: 116 mm x 116 mm x 120 mmn 4 x External mounting feet
lCS200 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T5 Gb, Ex tb IIIC T95 °C Dbn Ambient temperature range -20 °C to +50 °C
-40 °C when used with a plug and gland rated to -40 °Cn IP66 to EN 60529:1992n LCS – Electropolished 1.5 mm 316 L Stainless Steeln Enclosure size: 116 mm x 171 mm x 120 mmn 4 x External mounting feet
SINglE FUNCTION lOCAl CONTROl
2 FUNCTION lOCAl CONTROl
lCS300 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T5 Gb, Ex tb IIIC T95 °C Dbn Ambient temperature range -20 °C to +50 °C
-40 °C when used with a plug and gland rated to -40 °Cn IP66 to EN 60529:1992n LCS – Electropolished 1.5 mm 316 L Stainless Steeln Enclosure size: 116 mm x 236 mm x 120 mm n 4 x External mounting feet
3 FUNCTION lOCAl CONTROl
10
glCP RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T6/5 Gb, Ex tb IIIC T80/95 °C Dbn Ambient temperature range -40 °C to +50 °Cn IP66 to EN 60529:1992n Black moulded GRP enclosures n Available sizes: GLCP11: 250 mm x 255 mm x 120 mm, GLCP12: 250 mm x 400 mm x 120 mm, GLCP13: 405 mm x 400 mm x 120 mm, GLCP14: 405 mm x 400 mm x 165 mmn 4 concealed mounting holes
gRP CONTROl PANElS
xlCP RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex edm IIC T6/5 Gb, Ex tb IIIC T130/160 °C Dbn Ambient temperature range -50 °C to +50 °Cn IP66 to EN 60529:1992n Electropolished 1.5 mm (FXLCP3) or 2 mm (FXLCP5, 6 & 9) 316L Stainless Steel or powder coated Mild Steel boxn 0 – 4 Electropolished 3 mm 316L Stainless Steel or powder coated Mild Steel gland platesn Available sizes : XLCP3: 306 mm x 306 mm x 150/200 mm, XLCP5: 458 mm x 382 mm x 150/200 mm, XLCP6: 480 mm x 480 mm x 150/200 mm, XLCP9: 762 mm x 580 mm x 150/200 mmn 4 External mounting feetn Padlockable hasp
SHEET STEEl CONTROl PANElS
ASMCP RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5 Gb, Ex tb IIIC T87 °C Dbn Ambient temperature range (with window -20 °C) -40 °C to +55 °Cn IP66 to EN 60529:1992n Available in cast iron, cast aluminium and cast stainless steel n Available sizes: ASMCP150/CI/AL/SS: 335 mm x 310 mm x 200 mm, ASMCP170/CI/AL/SS: 560 mm x 560 mm x 245 mmn 4 external mounting holes
FlAMEPROOF CONTROl PANElS
CONTROl PANElS
11
POwER SwITCHINg
Sd RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5/6 Gb, Ex tb IIIC T87/85 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP65/IP66 to EN 60529:1992n Black powder coated cast ironn Supplied with 2 steel mounting strapsn 4 & 6 pole switch disconnectors in 20 A to 315 An 2 position switch Labeled 0 – 1 or On – Offn Switch padlockable in the off position
SF RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5 Gb, Ex tb IIIC T87 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n Black powder coated cast ironn Supplied with 2 steel mounting strapsn 4 pole fused switch disconnectors in 20 A to 125 An 2 position switch Labeled 0 – 1 or On – Offn Switch padlockable in the off position
SwITCH dISCONNECTORS
FUSEd SwITCH dISCONNECTORS
12
dOl RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5/6 Gb, Ex tb IIIC T87/85 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP65/66 to EN 60529:1992n Black powder coated cast ironn Supplied with 2 steel mounting strapsn Direct online starters from 5.5 kW to 30 kWn Adjustable overload relayn 240 V or 415 V control circuit n Overload relay suitable for Ex e Motors
SdS RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5/6 Gb, Ex tb IIIC T87/85 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n Black powder coated cast ironn Supplied with 2 steel mounting strapsn Star Delta Starter/Isolator from 11 kW to 30 kWn 240 V or 415 V control circuitn Overload relay suitable for Ex e Motors
dIRECT-ON-lINE STARTERS
STAR-dElTA STARTERS
MOTOR STARTERS
13
dbd170 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5 Gb, Ex tb IIIC T87 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n Available in Cast Iron, Cast Aluminium or Cast Stainless Steeln External mounting straps supplied as standardn Up to 3 rows of twenty single pole MCBs rated between 3 A and 63 A, up to 500 V.
dISTRIbUTION bOARdS
dISTRIbUTION bOARdS
dbd150 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5 Gb, Ex tb IIIC T82 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n Available in Cast Iron, Cast Aluminium or Cast Stainless Steeln External mounting straps supplied as standardn Up to 2 rows of twenty single pole MCBs rated between 3 A and 63 A, up to 500 V.
dISTRIbUTION bOARdS
14
lIgHTINg
Ex d CAlSTAR 500/600 STANdARdRANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: 500 – Ex d IIB T6 Gb, Ex tb IIIC T85 °C Db
600 – Ex d IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -20 °C to +60 °Cn IP67 to EN 60529:1992n Single lamp 8 Watt version.n Single and double lamp 18, 36, 58 Watt versionsn Borosilicate glass or polycarbonate overtuben Powder coated die cast aluminium housingn 230 V ACn High frequency electronic ballastn Power factor 0.98
Ex dE CAlSTAR 550/650 EMERgENCyRANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: 550 – Ex de IIB T6 Gb, Ex tb IIIC T85 °C Db
650 – Ex de IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -20 °C to +60 °Cn IP67 to EN 60529:1992n Single lamp 8 Watt version. Also available as an
fire exit fittingn Single and double lamp 18, 36, 58 Watt versionsn Borosilicate glass or polycarbonate overtuben Powder coated die cast aluminium housingn 230 V ACn High frequency electronic ballastn Power factor 0.98n Maintained or non-maintained operationn 3 hours operation time in emergency moden Ballast lumen factor -8 W – 27 %, 18 W – 12 %, 36 W – 10 %,
58W – 7 %
zONE 1 & 2 FlUORESCENT FITTINgS
zONE 1 & 2 FlUORESCENT FITTINgS
15
CAlSTAR 300/350 RANgE FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: 300 – Ex de IIC T6 Gb, Ex tb IIIC T85 °C Db, 350 – Ex d IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -20 °C to +60 °Cn IP67 to EN 60529:1992n Single 13 W compact fluorescent and 60 W GLS versionsn Borosilicate glass or polycarbonate overtube n Powder coated die cast aluminium housingn Powder coated 0.9 mm galvanised steel reflector
E501 FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIB T5/4 Gb, Ex tb IIIC T100 °C/135 °C Dbn Ambient temperature range -40 °C to +50 °C (T5) or +85 °C (T4)n IP66 to EN 60529:1992n Black powder coated cast ironn 2 external mounting feetn 15 W incandescent lamp
bUlkHEAd FITTINgS
SINglE STATUS/INdICATOR lAMP
16
lIgHTINg
ORbEx FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex de IIC T4, Ex tD A21 IP66 T135 °Cn Ambient temperature range -20 °C to +55 °Cn IP66 to EN 60529:1992n 230 V ACn 125 W, 150 W and 250 W mercury, metal halide and high pressure sodium versionsn Powder coated cast aluminium housingn Magnetic choke with associated electronic ignitern Optional wire guard
wEllglASS FITTINgS
FlN FEATURESn Zones 2 and 22n II 3 GDn Temperature range -40 °C to +53 °Cn Ex nR IIn IP65 to EN 60529:1992n Magnetic choke with associated electronic ignitern 230 V ACn 250 W and 400 W metal halide and high pressure sodium lampsn Body and cover: Aluminium 3.0 mmn Glass: Toughened glassn Reflector: Smooth polished or hammer finish Aluminium
FlOOdlIgHT FITTINgS
HORIzON FEATURESn Zone 1, 2, 21, 22n Certification: Ex de IIC T* Gb, Ex tb IIIC T** °C Dbn T classes to be confirmedn Corrosion resistant marine grade Aluminium alloyn 230 V ACn 250 W and 400 W tubular sodium and metal halide lampsn Re-lamping via threaded IIC access hole with separate cover to protect flamepathn Ex e magnetic ballast with power factor correction and digital ignitor
FlOOdlIgHT FITTINgS
17
600 FEATURESn Zone 0, 20, 1, 21, 2, 22n II 1 GDn Ex ia IIC T4 and iaD T180 °Cn 8 W white high intensity LED light sourcen Versatile output with optional beam formn Compact and lightweightn Up to 25 m cable
Applicationsn Aeronautical inspection and maintenancen Petrochemicaln Offshore Oil & Gasn Chemical
lEd HANdlAMP
300 FEATURESn Zone 1, 21, 2, 22n II 2 GDn Ex d IIB T5 ExtD T100 °C A21n IP66/67n Polycarbonate over tuben Moulded suspension hooks securedn Compact fluorescent lampsn The 300 F can be festooned by interconnecting suitable cables between light fittings using the 20 mm threaded entries. Alternatively each light fitting can be fitted with a suitable cable and flameproof inline plug and coupler to ease deployment.
PORTAblE lUMINAIRIES
PORTAblE lIgHTINg
18
SIgNAllINg
bREAkglASSE0301 FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex d IIC T6 Gb, Ex tb IIIC T80 °C Dbn Ambient temperature range -40 °C to +50 °Cn IP66 to EN 60529:1992n Red powder coated cast ironn 2 external mounting feetn Operating voltage of 415 V max
bREAkglASSE0301 FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex ed IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n End of line or series resistors can be fittedn Moulded red GRP (other colours available)n 2 external mounting lugsn Operating voltages – 24 V max with resistors fitted, 415 V without
FlAMEPROOF MANUAl CAll POINT
gRP MANUAl CAll POINT
19
FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex de IIC Gb T*, Ex tb IIIC Db T** °C (T class TBA)n Xenon flash tuben Volt free and telephone initiationn 24/48 V DC or 110/230 V AC operationn 5, 10, 15 and 21 J flash powersn Fixed 1 Hz frequencyn GRP Housingn Ex e terminal chamber
E0303/E0304 FEATURESn Zone 1, 2, 21, 22n II 2 GDn Certification: Ex ed IIC T6 Gb, Ex tb IIIC T85 °C Dbn Ambient temperature range -40 °C to +55 °Cn IP66 to EN 60529:1992n E0303: GRP key switch call point n E0304: GRP push button call pointn Moulded red GRP (other colours available)n 2 external mounting lugs
vANTAgE bEACON
MANUAl CAll POINT
20
PlUgS ANd SOCkETS
n Zone 1, 2, 21, 22n II 2 GDn Ex de IIC T4/5/6, Ex tD A21 T70 °C/78 °C/87 °C/90 °C/98 °C/107 °Cn Ambient temperature range -40 °C to +60 °Cn IP 66/67n 20 A, 32 A and 63 A versions
dxN RANgE FEATURES
SPFxl ANd SPgl FEATURES
n Zone 1, 2, 21, 22n II 2 GDn Ex ed IIC T6 T85 °C n IP66/67n SPXL: Electro polished 316L Stainless Steeln SPGL: Enclosure black moulded GRP
SP SPIdER bOx
TF FEATURESn Zone 1, 2, 21, 22n II 2 GDn Ex e IIC Gb n 100 VA to 550 VAn Voltages available: Primary 0 – 230 – 400 V Secondary 0 – 24 – 48 V, Primary 0 – 230 – 400 V Secondary 2 x 0 – 110 V, Primary 0 – 240 – 415 V Secondary 0 – 24 – 48 Vn Terminals capacity 0.5 – 6 mm²
Ex E TRANSFORMERS
21
SySTEMS
FEATURES
Pepperl+Fuchs is able to offer Ex protected systems engineered from combinations of our product range. A typical example would be an ASM type Ex d enclosure being used to house industrial equipment such as PLC’s, contactors and MCB’s close coupled to an FXL type Ex e enclosure via a line bush. The Ex e enclosure is used to house control functions and terminals thus allowing for easier installation.
Component approved line bushes are used to join the enclosures to one another, and if required the whole assembly may be mounted on a steel framework. Since both design and manufacture of the system take place in-house at our facilities, the customer has only one point of contact and can be assured of good communication throughout the process.
In conjunction with the wide range of local control stations, alarm and signalling that we offer, entire automation systems may be placed within the hazardous area if required.
CUSTOMISEd SySTEMS
22
ENgINEEREd SOlUTIONS
Pepperl+Fuchs products are used throughout the world in applications involving industrial, hazardous and corrosive environments. By engineering a complete solution at our ownfacility, we are able to offer our world-class products in a variety of panels and enclosures designed and built according to your specifications.
Pepperl+Fuchs supports a wide range of cabinet solutions including interface, marshalling, control room and fieldbus power types. We are able to integrate our full line of products into a cabinet that reduces your commissioning time and, most importantly, reduces your upfront costs. In close collaboration with you our experienced engineers will develop a design exactly tailored to meet the requirements of yourapplication.
SySTEMS dESIgN
CUSTOMIzEd CAbINET SOlUTIONS
As a global leader in design and manufacturing of purge systems, Pepperl+Fuchs can offer, in conjunction with our expertise in cabinets customization, a complete solution tomeet your most stringent requirements.We can design and build an enclosure based on your specification, and install the necessary purge equipment. Additionally, we can install your control equipment and our proven intrinsic safety barriers in these cabinets for a complete solution. This allows you to operate general-purpose equipment within explosion hazardous areas.
PURgEd CAbINET SOlUTIONS
23
Remote I/O Systems of Pepperl+Fuchs are widely used in all applications of the processing industry. Their high modularity is backed by a wide choice of enclosures, thus allowing our engineers to design the most efficient solution for your specific control requirements. Stainless steel as well as GRP housing materials are available, all featuring high ingress protection ratings. In addition to a custom-fit solution for your application, the Remote I/O enclosures reduce engineering costs and allow the fastest possible installation on location.
REMOTE I/O ENClOSURES
The FieldConnex® system offers the optimal installation infrastructure for a most modern digital fieldbus communication topology. We can install the various modules in a broad variety of enclosures to meet the requirements of your application, thus keeping the wiring and engineering costs to a minimum. Enclosures are available in aluminium, stainless steel and GRP glass reinforced polyester, covering various sizes. There is a choice of cable glands and connectors as well as further installation accessories to design the most efficient solution for you plant.
FIEldbUS JUNCTION bOxES
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 225017 01/12 02
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most deman-ding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
PROCESS AUTOMATION – PROTECTINg yOUR PROCESS
Southern/Eastern Europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921E-Mail: pa-info@it.pepperl-fuchs.com
Northern Europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431E-Mail: pa-info@gb.pepperl-fuchs.com
Southern America HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 E-Mail: pa-info@br.pepperl-fuchs.com
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222E-Mail: pa-info@pepperl-fuchs.com
North/Central America Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002E-Mail: pa-info@us.pepperl-fuchs.com
western Europe & Africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500E-Mail: pa-info@be.pepperl-fuchs.com
Asia Pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091E-Mail: pa-info@sg.pepperl-fuchs.com
Middle East/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378E-mail: pa-info@ae.pepperl-fuchs.com
1
2
3
4
5
6
7
8
top related