hardboard floor protection installation guide (for construction and home remodels)
Post on 24-Jul-2015
471 Views
Preview:
TRANSCRIPT
For extra tough floor protection during construction
and remodeling, nothing beats hardboard. Hardboard is
44 mil. thick and designed to protect wood, tile, marble,
concrete, and any other hard surface.
CONSIDER USING WR-HARDBOARD TO PROTECT HARD FLOORING SURFACES
Heavy duty, thick 44 mil. protection
Water resistant for up to 72 hours
Lays out flat, fast, saving you time and money
Eco-friendly, made from 100% recycle material
What does WR Stand for?
The “WR” in Hardboard-WR stands for “water resistant.” The experts
at Pro Tect developed the hardboard floor protection to be water
resistant for up to 72 hours.
Quickly replacing Masonite on job
sites nationwide
White Masonite is a great product, Hardboard-WR is faster, less
expensive, and easier to handle, which makes it a leading choice on
job sites nationwide.
This guide will show you step-by-step how easy it is to use and
install WR-Hardboard to protect flooring surfaces for construction
and remodeling.
STEPS
UNROLLSTEP 1
1
Unrolling WR-Hardboard is a breeze. Just let it fly!
Repeat the unrolling process to create side-by-side sections as pictured above.
1
TAPE THE SEAMS
Tape the seams in between sections using Pro
Tect hardboard tape. Apply tape every couple
of yards to secure the WR-Harboard.
STEP 2
1
SECURE THE SEAMS
Once you have the WR-Hardboard in place,
take the roll of tape and tape off the seams.
Tape the length of the WR-Hardboard in full
for maximum stability and protection.
STEP 3
CONCLUSION
FOR HARDWOOD STAIRS, FOLLOW THESE SIMPLE STEPS:
Unroll
Tape the seams
Secure the seams
Installing WR-Hardboard protection is quick and easy. It provides top
notch floor protection for hard flooring surfaces.
If you have any questions about WR-Hardboard or any
other floor protection concerns, talk to the pros at
Pro Tect. Check out Pro Tect online for more floor
protection tips, tools, and products.
THANKS
top related