grease guns - g.l. huyett 2018. 5. 24. · a grease gun by manually filling with bulk grease. grease...
Post on 30-Mar-2021
7 Views
Preview:
TRANSCRIPT
All manufacturer names and numbers are for cross reference identification purposes only. In no way are we implying that our parts were made by the manufacturers listed. Prices, materials, dimensions, tolerances, designs and grades subject to change without notice. © G.L. Huyett 2011
785.392.3017 FAX 785.392.2845www.huyett.com
BOX 232 • MINNEAPOLIS, KS • 67467
RevIsed 06-11
90
™
There are many different types and designs of grease guns and we offer lever, pistol, cordless and pneumatic grease guns. We have a gun for practically any application.
LEvER GUN
PISTOL-GRIP GUN
PNEUMATIC GUN
CORDLESS GUN
GREASE GUNS
Lever guns require two
hands to operate.
Only one hand is needed to operate pistol-grip grease guns.
Pneumatic grease guns are
operated by a trigger
instead of lever.
Cordless grease guns are trigger operated,
portable and convenient.
Our standard lever gun is not only economical,
but also provides the most volume per
stroke as compared to other manual guns.
A full range of interchangeable / customized
features are available to suit your individual
application.
Pistol-grip guns are good for use in close-clearance areas. Using just one hand, grease is pumped via a simple squeeze. Pistol-grip guns typically dispense less grease per stroke than a standard two-handed lever gun.
Pneumatic guns use an air supply allowing
continuous delivery of grease. They are
effective when paired with bulk loading
equipment for high volume applications.
Cordless guns use rechargeable Lithium-ion batteries for complete portability and ease of use. Huyett guns come equipped with a carrying case and two batteries for extended use.
Designed for
confined spaces.
Battery Powered
"Roam Free"
Pneumatic Tethered to an
Air line
Two Handoperation
One Handoperation
One Handoperation
One Handoperation
You are free to roam!
Delivers the most
grease per stroke.
All manufacturer names and numbers are for cross reference identification purposes only. In no way are we implying that our parts were made by the manufacturers listed. Prices, materials, dimensions, tolerances, designs and grades subject to change without notice. © G.L. Huyett 2011
785.392.3017 FAX 785.392.2845www.huyett.com
BOX 232 • MINNEAPOLIS, KS • 67467
RevIsed 06-11
91
™
86 104 12
2 14
0 16x1000PSI
AIROPERATED
CORDLESSLEVER &PISTOL GRIP
As with any tool, care should be taken in selecting the right grease gun for the application. Over-lubrication or utilization of the wrong grease can damage the tool or the bearing. Also, the grease itself can be a health concern if allowed to penetrate the skin. Below are some guidelines for the selection of a grease gun.
APPLICATION
PRESSURE
ACCESSIBILITy
RELOADING
GREASE GUN SElECTION
Selecting the proper gun typefor your application is crucial.
Please ensure that the grease gun you choose has the appropriate pressure for your application.
Consider adding accessories to Optimize the potential of the gun.
These loading options are
detailed further on pages 92-93.
First, DEFINE the USE. Will the grease gun be used in confined spaces or open spaces? How often will it be used? What kind of grease will be used?
Second, ASSESS PRESSURE REQUIREMENTS. What pressure is needed to open and dispense grease in the application? High pressure is needed to "unfreeze" clogged fittings with heavy lubricants or in cold weather.
Next, DETERMINE SPACE, CLEARANCE and ACCESSIBILITY. The gun design must allow a compatible coupler to access the greasing point and provide hand operation.
Lastly, CONSIDER REFILLING OPTIONS. Bulk,
cartridge or suction load? Once defined,
be sure your grease gun has the proper
specifications for refilling.
PSI refers to the maximum sustainable pressure maintained in the coupler and fitting engagement.
Portable and cheap. Good for high volume. Go anywhere!
Matching your gun with the proper accessories is important.
Bulk Load Suction Load Cartridge Load
All manufacturer names and numbers are for cross reference identification purposes only. In no way are we implying that our parts were made by the manufacturers listed. Prices, materials, dimensions, tolerances, designs and grades subject to change without notice. © G.L. Huyett 2011
785.392.3017 FAX 785.392.2845www.huyett.com
BOX 232 • MINNEAPOLIS, KS • 67467
RevIsed 06-11
92
™
Grease cartridges are convenient but have an adverse environmental impact from disposable cartridges.
Suction loading is one of two inexpensive
methods of reloading a grease gun by
manually filling with bulk grease.
Grease guns are typically loaded in three ways: cartridge, suction and bulk load. The following pages detail these methods to help you choose the grease gun and accessories best suited for your application.
CARTRIDGE LOAD
SUCTION LOAD
GREASE GUN lOADING
The grease gun is filled using packaged
cartridges. Such cartridges are convenient
but are more costly than bulk load and
impose a greater negative environmental
impact.
Suction load means the grease gun is filled manually from a bulk drum by inserting the end of the gun into grease and pulling up on the handle. This method is best suited for lighter grade grease as it tends to be difficult to extract heavy grease.
After loading the grease barrel and attaching it to the gun head, the air Bleeder valve provides a method for releasing entrapped air from the grease barrel providing easier gun priming.
PULL PLUNGER BACK, & LOCK IN PLACE.Seals to prevent leakage and contamination
REMOVE PLASTIC CAPfrom new grease cartridge & insert into gun face down.
A messy & inexpensive yet strenuous method to reload a grease gun.
Quickly reload grease guns using
standard grease cartridges.
HOW TO LOAD A CARTRIDGE
RELEASE PLUNGER LOCK.Pump lever several times to prime.
ONCE THE CARTRIDGE IS INSERTED,Remove flip-top lid facing towards the top of the gun.Replace grease gun head.
All manufacturer names and numbers are for cross reference identification purposes only. In no way are we implying that our parts were made by the manufacturers listed. Prices, materials, dimensions, tolerances, designs and grades subject to change without notice. © G.L. Huyett 2011
785.392.3017 FAX 785.392.2845www.huyett.com
BOX 232 • MINNEAPOLIS, KS • 67467
RevIsed 06-11
93
™
Barrel pump installed onto5 gal. pail of bulk grease.
Follower plate minimizes air pockets
in the grease.
Bulk loader fitting of grease gun is mated with loader coupler on barrel pump.
Barrel pump lever is used to transfer
grease from pail or drum to grease gun.
GREASE GUN lOADINGWe offer a complete line of handling and bulk fill accessories. If you do not see what you are looking for contact our Sales Team for a quote.
BULk LOAD
Bulk loading is the easiest, cleanest and most cost effective method of reloading a grease gun. Using bulk loading to reload your gun will necessitate purchasing the following items:
Bulk Loader Fittings - See page 115
Air Bleeder Valve - See page 115
Bulk Loader Couplers - See page 115
Bulk Filler Pumps - See page 114
Follower Plates - See page 114
A barrel pump is installed onto a pail of
grease. The grease gun’s loader fitting is
pressed onto the loader coupler on the pump.
As grease transfers, some air may enter the
gun which may be vented by the air bleeder
valve. The follower plate will minimize air
pockets in the bulk grease.
bulk loader fittings provide an easy, clean and cost effective method for reloading a grease gun.
air Bleeder valves Assist in grease Gun priming.
HOW TO BULk LOAD
Least environmental impact.
No cartridges to discard in landfill.
Bulk LoaderValve
Air BleederValve
HOW TO BULk LOAD yOUR GUN
top related