ththorneandderrick.com/wp-content/...conduits-product... · fl/flp - pliable steel conduit &...
Post on 09-Aug-2020
7 Views
Preview:
TRANSCRIPT
product & solutions guideTHE POWER IN CABLE MANAGEMENT
10edition
TH
WWW.FLEXICON.UK.COM
ww
w.fl
exic
on.u
k.co
m
Welcome to the 10th edition of our Product & Solutions Guide for Flexible and Pliable Conduit systems.
Featuring many new products, we have once again demonstrated our commitment to innovation
and we can now boast over 47 different conduit systems to choose from.
We have experienced major growth in both home and overseas markets through our
commitment and dedication and we are certainly the brand you can rely on.
We continue to operate as an independently owned family business. Designing and manufacturing
Cable Management products in the UK for a wide range of markets including the Construction
Industry, Rail, Marine, Defence, Machinery & OEM’s to name but a few. We can now add
solutions for Hazardous Areas to this list following the introduction of our new range of EXD
flameproof glands.
Our mission is to continually develop products that are easy to use and widely available offering
real value, through our extensive network of selected distributors, agents and stockists.
We hope you like our new look and we look forward to meeting our customers requirements
and exceeding your expectations in the future.
Adrian Poulton Managing Director
foreword
Visit our website to keep up to date with all our latest developments…
Flexicon UK
Flexicon Pty
Flexicon Europe
Flexicon USA
Griflex
www.flexicon.uk.com
www.flexiconaustralia.com
www.flexicon.eu.com
www.flexicon.us.com
www.griflex.com
Introduction
why choose Flexicon 4NEW products 6application solutions 8
metallic conduit and fittings 14
conduit selection guide 16metallic fittings selection guide 18FU/SSU - flexible steel conduit & fittings 20FSU/FNU - flexible coated steel conduit & fittings 22LFHU/FPU - flexible coated steel conduit & fittings 24LTP/LTPHC/LTPUL/LTPE - liquid tight flexible coated conduit & fittings 26LTPSS/LTPPU/LTBRDP/LTBRDLFH - specialist liquid tight flexible coated conduit & fittings 28EXD flameproof conduit fittings 30FL/FLP - pliable steel conduit & fittings 32Ultrascreen® LFHP - pliable coated steel conduit & fittings 33FSB/LFHUBRD - flexible coated steel conduit with overbraid & fittings 34FB/FUSSB - flexible steel conduit with overbraid & fittings 36LTPBRD - flexible coated steel conduit with overbraid & fittings 38FPRSS/FPRTC/FPISS/FPIHSS - flexible nylon conduit with overbraid & fittings 40FTCB braided sleeving 42conduit fittings offering integral strain relief 43
non-metallic conduit and fittings 44
conduit selection guide 46non-metallic fittings selection guide 48conduits: FPAS/FPAL - standard & lightweight nylon flexible conduit 50 FPAH/FPR/FPI/FPIH - standard & heavyweight nylon flexible conduit 51 FPY/FPADS/FPP - polypropylene, nylon & double slit flexible conduit 52FPA type fittings 54FPA BRASS type fittings 57FPAX type fittings 60FPAX BRASS type fittings 63FPA & FPAX T Pieces and Dividers 66Flexilok® fittings 68white products - conduit and accessories 69MP/MPS type fittings 70MSL/MPC type fittings 71conduits: FPC - pvc spiral flexible conduit & fittings 72 LPC - pvc spiral smooth conduit & fittings 74 FPL - upvc corrugated pliable conduit & fittings 76 FPY large corrugated - nylon large diameter flexible conduit & fittings 77
accessories
locknuts, stopping plugs, conduit clips, thread converters, cable glands and tools 78-81contractor packs 82energy management products 84
technical data
resistance to chemicals - metallic 86resistance to chemicals - non-metallic 88thread data and IP ratings 90-91cutting and assembly guidance 92-93performance of low fire hazard conduits & fittings 94quality approvals 96part number index 98 03
contents
Flexicon group introduction
04
ww
w.fl
exic
on.u
k.co
m
Utilising the latest technologies in production and automation, our manufacturing
expertise and efficiencies allow us to be competitive in todays Global marketplace.
With a comprehensive stock holding we strive to deliver service excellence to meet
our customers demands faster, ensuring you can count on us.
Flexicon offers
Flexicon PtyAfter only eight years in Australia, Flexicon are seen as market leader and the trade’s first choice, with recognised superior quality, value and service.
Many of the Flexicon range of products provide unique features, setting them apart from the rest, saving installation time and reducing lifetime costs with reduced maintenance and replacement.
A prime example is Flexicon’s long-life nickel plated brass fittings, precision manufactured to enable ease of assembly and
installation, and proven tough in all manner of Australia’s harsh industrial and environmental conditions.
FLEXICON also manufacture flexible metallic conduit, which as with all Flexicon product, is manufactured and tested to meet and exceed the high AS/NZ standards giving total peace of mind.
Australia’s trade chooses Flexicon – ultimate quality – always value and service.
GriflexGriflex is a leading manufacturer providing hose & ducting solutions for the UK and overseas.
Our products are available in a range of sizes from ¼” to 10” internal diameter and are intended for use in a diverse range of applications. These include the suction and delivery of water, oil, sewage, slurries, powders and the conveyance of liquids and gasses in factory air lines, pneumatic equipment & general workshop use.
As part of an ongoing plan, considerable investment has taken place in our UK based manufacturing facility ensuring that Griflex utilise the latest production technologies. As a result we have seen improvements in efficiency and the development of new products broadening our product range.
Products include: • Springflex™ clear/wire reinforced suction hose
• Unreinforced tubing & braided PVC hose
• PVC spiral reinforced suction & delivery hose
• Wire reinforced Vacuflex ducting
• PVC & Polyurethane ducting
For further information on the Griflex range of hose, tube & ducting please call +44 1675 464803 or email sales@griflex.com
Flexicon continues to invest in its UK based headquarters and manufacturing facilities, ensuring excellence, innovation and assurance are second to none.
Committed to exceeding customer expectations when it comes to Flexible Conduit, Flexicon continue to innovate in product development, supported by exceptional levels of service and support.
Flexicon, leading the way in today’s global marketplace.
• Independently tested products that comply with relevant global standards
• User friendly products offering time saving innovations
• Quality products from the global experts when it comes to flexible conduit
• A true cable management solution whether its standard products or bespoke made to order assemblies
• Global outlets serving the industry
• Progressive and expanding product portfolio
05
Flexicon a global presence
• Excellence through engineering
• Progression through innovation
• Assurance through competence
Flexicon - When quality, safety and value counts
Our product offering has been developed and tested to the most demanding quality standards and have been awarded
quality approvals and compliance worldwide;
We offer you peace of mind when it comes to your supply chain for flexible conduit and accessories. Are you confident your current
solution has been independently tested and offers compliance to local and global standards?
www.flexicon.us.com | www.flexicon.uk.com | www.flexicon.eu.com | www.flexiconaustralia.com
®
BS EN IEC 61386
FM58347
what’s new?
06
ww
w.fl
exic
on.u
k.co
m
As a progressive company we are continually investing in new product development to expand our range hence offering you more choice.
We have added nearly “500” new products since our last Catalogue. A selection of these products are highlighted below;
• A true conduit system solution for Hazardous areas
• Independently tested and approved to the latest standards
• EX d, EX e and EX t approved applications with both ATEX and IECEx certification
EXD - Flameproof Barrier Glands• EMC screening applications
• Independently tested and approved
• High tensile strength
• High IP ratings
Ultrascreen®
PAGE 30 PAGE 33
• Widest range of Liquid Tight fittings
• Superior product performance as standard – washdown and steam cleaning applications
• Metallic and non-metallic conduit solutions for IP66, IP67, IP68 & IP69K applications
Liquid Tight IP69K fittings • Aesthetic offer
• Simple and easy to fit
• Complete solution of conduits, fittings and accessories in white
White conduits range
PAGE 26 PAGE 69
• High mechanical strength
• High IP ratings
• High flexibility
• EMC Screening performance
Internally Braided Liquid Tight• Fast fit reducing divider
• Rounded internal corners facilitates easy pull through of cables
• Mounting lugs for secure fixing
• All the benefits of the FPA/FPAX connector
FPA & FPAX Dividers
PAGE 66PAGE 28
• High fatigue life
• High abrasion resistance
• Good low temperature performance
• Halogen Free
PAGE 24 & 28
FPU and LTPPU - polyurethane coated conduits • Provides cable strain relief
• Can be used with 20 conduit systems
• Nickel plated brass fittings
• Can provide enhanced IP rating on cable inside the conduit
Cable glands
PAGE 43
new product focus
FPA & FPAX the ultimate range of nylon PA66 fittings
• Fast fit less than 3 seconds
• High tensile strength 70kg
• High IP rating IP66 + IP67 + IP68 (2 bar) + IP69K
The Ultimate Security Safest fitting All round teeth provide anti vibration protection together with a high pull off strength, i.e. 40kg with FPAS21 conduit and 70kg with FPAH21 conduit
The Ultimate Connection Perfomance you can rely on Ingress Protection •FPA IP66 •FPAX IP66 + IP67+ IP68(2Bar)+IP69K
The Ultimate Simplicity & Speed Fast fit Push fit connection suitable for fine & coarse pitch Nylon and Polypropylene Conduits. Can be fitted in less than 3 seconds.
The Ultimate Range 10mm up to 67mm in black or grey 13 conduit sizes with Metric, PG, NPT and UNEF thread variants available as well as Nickel plated brass threads
The Ultimate in Convenience Ready to install Nylon metric threads supplied with glass reinforced nylon locknuts. FPAX fittings supplied with face sealing washers
The Ultimate Removal facility Reduce whole life costs Can be removed using a screwdriver if required
The Ultimate Choice!
1
2
3
4
5
6
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
BS EN IEC 61386
07
1
2
3
4
5
6
08
Applications include
• Facility wiring
• Underfloor wiring distribution – home run and tap off units
• CCTV / Access Control / Exterior Lighting
• BMS’s (Building Management Systems)
• Structured Cabling networks
• Machine and process equipment
Benefits
• Products are quick and easy to install
• Inherent flexibility for future proofing installations
• Protection for critical cabling to provide continuity of supply
Industry Approvals
Whether it’s for conventional power cables or the latest cable specification for data networking, flexible conduit offers the ideal solution for cable routing and protection for all building types.
Typical products include
ww
w.fl
exic
on.u
k.co
m
BS EN IEC 61386
Market Segments
Flexible conduit is commonly used for the protection and
containment of vulnerable electrical cables, wiring and fibre
optics. It is an extremely effective form of cable management,
available in a variety of systems, which can cope with a diverse
range of environmental factors and operating conditions.
Solutions for Construction
FU
products & systems
FSU
products & systems
LFHU
products & systems
FP
nylon products and systems
Flexilok
nylon products and systems
09
Solutions for Defence & Marine
Applications include
• Naval Vessels
• Fighting Vehicles
• Weapon systems
• Operation & system
control rooms
• Portable Buildings
• Ship and Dock Yards
• Ship/Boat engine rooms
Benefits
• High performance products offering superior tensile strength
• Designed to meet the strictest standards – EMC testing,
vibration and shock standards
• Swivel type UNEF fittings as standard to eliminate
cable twisting Industry Approvals
Flexicon offer an expanding range of products for this demanding sector. Requiring protection of critical systems this sector demands reliability within the severest of environments.
Typical products include
ULTRASCREEN®
products & systems
FP
High impact nylon products & systems
SS
Stainless Steel products & systems
LT
Liquid Tight systems
EXD
Hazardous area products
Braided
products and systems
For further info visit
our micro-site
www.flexicon.uk.com/mod/
BS EN IEC 61386
10
Applications include
Benefits• High performance products offering superior tensile and
impact / compression strength
• Designed to meet the strictest standards – EMC testing / vibration
• Wide product range to meet all applications
• Independently tested to the relevant standards
• Vibration proof
• Anti-tamper Industry Approvals
• Infrastructure – Tunnels
and stations
• Signalling
• Telecoms
• Passenger Information
Systems
• Points Machines
• Lighting
• OEM solutions for
rolling stock
• Rail Carriage construction
(interior / exterior / inter
carriage connection)
metro and trolleybuses
• EMC on safety systems
• Equipment monitoring
• Security systems -
CCTV/Monitoring
• HVAC
Flexicon offer a range of products for this technically demanding sector. IP ratings, tensile strength characteristics, weight, corrosion resistances, fire performance properties and operating temperature ranges are all factors to consider. Typical products include
ww
w.fl
exic
on.u
k.co
m
For further info visit
our micro-site
www.flexicon.uk.com/rail/
BS EN IEC 61386
Solutions for Rail
LFH
Low Fire Hazard products & systems
FP
High impact nylon products & systems
SS
Stainless Steel products and systems
LT
Liquid Tight systems
FPA(X)
Up to IP69K Ingress Protection
Braided
Products and systems
®
This sector demands reliability due to the potentially significant cost implications of downtime. A constant strive for efficiency often results in faster speeds and more intense usage. Mechanical strength, flexibility, abrasion resistance and the ability to withstand repeated movements are typical requirements. Typical products include
BS EN IEC 61386
11
Solutions for Manufacturing
Applications include
• CNC Machines
• Wood / Metal
working machines
• Welding Machines
• Air conditioning units
• Robotics
• Conveyer systems
• Factory automation
Benefits
• Wide product range to meet all applications
• Swivel type fittings to avoid cable twisting
Industry Approvals
FP
Nylon products & systems
LT
Liquid Tight systems
LPC
Spiral reinforced products and systems
EXD
Hazardous area products
Braided
Products and systems
12
Applications include
• On-shore and off-shore petrochemical and refining plants
• Distilleries
• Paint Spraying Plants
• Flour Mills
• Woodworking Machine Plants
• Water Industry / Sewage treatment
• Petrol forecourt environments
• Pharmaceutical industry
Benefits
• Designed to meet the strictest standards
• Independently tested to the relevant standards Industry Approvals
In certain sectors of industry, flammable substances such as gases, vapours, mist or dust can escape during manufacture, processing, storage and transport thus potentially creating an explosive atmosphere. Our new range of high performance products have been designed for highly demanding applications and meet the latest relevant ATEX and IECEx requirements.
Typical products include
ww
w.fl
exic
on.u
k.co
m
For further info visit
our micro-site
www.flexicon.uk.com/hazardous/
LT
Liquid Tight Conduits
EXD
Flameproof - Hazardous Area Barrier glands
BS EN IEC 61386
Solutions for Hazardous Areas
0518
Applications include
• Medical
• Telecoms
• Renewable energy
• Utilities
• Rail
• Processing plants
• Security
Benefits
• Custom made solutions to meet your exact requirements
• Reduce your installation times
Flexicon can offer a bespoke design service should you not be able to find what you are looking for. We have the skills, knowledge and experience to develop specials with minimal lead times providing you the choice you deserve Typical products include
• Different coloured conduits
• Bespoke lengths
• Alternative thread combinations
• Bulk packaging
• Conduit with draw wire
• Assemblies
Contact us to discuss your requirements
Email: sales@flexicon.uk.com
Tel: +44(0)1675 466900
or visit our website and use the "contact us" facility
www.flexicon.uk.com
13
Solutions for Tailored Applications
14
With over 26 different metal conduit systems to select from there is sure to be a system to meet your application. Choose from conduit systems
ranging from 10mm to 75mm in size, manufactured in galvanised steel or stainless steel and with or
without a range of coverings/overbraiding.
Key Features • High compression strength
• High pull off strength
• Wide temperature tolerances
• High impact strength
• EMC screening performance
• High IP rating - up to IP69K
FM58347
®
Key Benefits • Suitable for a range of applications including heavy duty
• Maintains integrity of the system in extreme applications
• Suitable for a diverse range of operating environments
• Can withstand impact forces such as falling objects
• Protection against electromagnetic interference
• No risk of water or dust ingress
metallic conduit & fittings
15
BS EN IEC 61386
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
16
ww
w.fl
exic
on.u
k.co
mmetallic selection application guide
Page number
compression strength
kg/100mm20mm
nominal size
pull-off strength
kg20mm
nominal size
minimumbend radius20mm
nominal size
colours
20
20
22
22
24
24
26
26
26
26
40
40
40
40
conduit system
IP40 350 120 45 zinc
IP40 400 170 45 stainlesssteel
IP54, IP65 350 120 45black, grey
orange
IP54, IP65 350 120 45 black
IP54, IP65
IP54, IP65
350
350
120
120
45
45
black
black
IP66, IP67,IP68, IP69K
400 130 65black, grey
orange
IP66, IP67,IP68, IP69K
400 130 65 black
IP66, IP67,IP68, IP69K
500 160 90 black
IP66, IP67,IP68, IP69K
350 120 65 black
IP67 75 100 45 stainlesssteel
IP67 75 75 45 tin
IP67 45 100 45 stainlesssteel
IP67 60 100 45 stainlesssteel
78 accessories 82 contractor packs 86 chemical resistance
IP rating available
34
34
36
36
38
28
28
IP66, IP67,IP68, IP69K
IP66, IP67,IP68, IP69K
400
400
130
130
65
65
black
black
IP54, IP65 350 120, 300 45 zinc
IP54, IP65 350 120, 300 45 stainlesssteel
IP40 350 120 45 zinc
IP40 350 120 45 stainlesssteel
IP66, IP67,IP68, IP69K
400 350 65 stainlesssteel
28
28
IP66, IP67,IP68, IP69K
400 130 65 black
IP66, IP67,IP68, IP69K
400 130 130 black
galvanised steel
stainless steel, grade 316
galvanised steel, pvc coated
galvanised steel, nylon coated
galvanised steel, LFH coated
galvanised steel, polyurethane coated
galv steel, pvc coated, liquid tight
galv steel, thermoplastic rubber, liquid tight
galv steel, pvc coated, liquid tight
galv steel, pvc coated, liquid tight
PA6 corrugated, SS316 overbraid
PA6 corrugated, tinned copper overbraid
PA12 corrugated, SS316 overbraid
PA12 corrugated, SS316 overbraid
FU
SSU
FSU
FNU
LFHU
FPU
LTP
LTPHC
LTPUL
LTPE
FPRSS
FPRTC
FPISS
FPIHSS
galv steel, pvc, galv steel overbraid
galv steel, LFH coated, SS316 overbraid
galvanised steel, galv steel overbraid
galvanised steel, SS316 overbraid
FSB
LFHUBRD
FB
FUSSB
LTPBRD
stainless steel, pvc coated, liquid tight
galv steel, polyurethane coated, liquid tight
LTPSS
LTPPU
galv steel, rubber coated, SS316 overbraid
LTBRDLFH
LTBRDPgalv steel, braided core, pvc coated, liquid tight
galv steel, braided core, LFH coated, liquid tight
32IP66, IP67,
IP68,300 50, 100 35 black
galvanised steel, pvc coated, pliableFLP
33IP66, IP67,
IP68,570 50, 100 40 black
galvanised steel, LFH coated, pliableLFHP
32 IP40 300 30 35 zincgalvanised steel, pliableFL
17
high fatigue life
temperature range flexible pliable low
fire hazard halogen free self extinguishing
EMC screening@1MHz
high abrasion
resistance
high UV resistance
metallic conduit and fittings
-100˚C to+300˚C
-100˚C to+400˚C
-15˚C to+70˚C
-40˚C to+120˚C
-25˚C to+90˚C
-40˚C to+80˚C
-20˚C to+105˚C
-45˚C to+135˚C
-15˚C to+75˚C
-15˚C to+70˚C
-20˚C to+105˚C
-40˚C to+80˚C
-15˚C to+70˚C
55dB
-25˚C to+90˚C
49dB
-100˚C to+300˚C
55dB
-100˚C to+300˚C
49dB
-45˚C to+135˚C
49dB
-20˚C to+105˚C
60dB
-25˚C to+90˚C
60dB
-40˚C to+120˚C
49dB
-40˚C to+120˚C
67dB
-50˚C to+110˚C
49dB
-50˚C to+110˚C
49dB
90 thread data 91 technical guidance 94 low fire hazard
galvanised steel
stainless steel, grade 316
galvanised steel, pvc coated
galvanised steel, nylon coated
galvanised steel, LFH coated
galvanised steel, polyurethane coated
galv steel, pvc coated, liquid tight
galv steel, thermoplastic rubber, liquid tight
galv steel, pvc coated, liquid tight
galv steel, pvc coated, liquid tight
PA6 corrugated, SS316 overbraid
PA6 corrugated, tinned copper overbraid
PA12 corrugated, SS316 overbraid
PA12 corrugated, SS316 overbraid
FU
SSU
FSU
FNU
LFHU
FPU
LTP
LTPHC
LTPUL
LTPE
FPRSS
FPRTC
FPISS
FPIHSS
galv steel, pvc, galv steel overbraid
galv steel, LFH coated, SS316 overbraid
galvanised steel, galv steel overbraid
galvanised steel, SS316 overbraid
FSB
LFHUBRD
FB
FUSSB
LTPBRD
stainless steel, pvc coated, liquid tight
galv steel, polyurethane coated, liquid tight
LTPSS
LTPPU
galv steel, rubber coated, SS316 overbraid
LTBRDLFH
LTBRDPgalv steel, braided core, pvc coated, liquid tight
galv steel, braided core, LFH coated, liquid tight
-15˚C to+70˚C
70dBgalvanised steel, pvc coated, pliableFLP
-25˚C to+90˚C
70dBgalvanised steel, LFH coated, pliableLFHP
-40˚C to+120˚C
70dBgalvanised steel, pliableFL
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
18
ww
w.fl
exic
on.u
k.co
m
®
metallic selection guide
• UK manufactured products to the
highest standards
• Highest IP performance for liquid tight
fittings as standard
• Highest tensile strength
performance fittings
• Stainless Steel variants available
• Vibration tested for secure installations
• Simple construction for ease of
installation - Fixed and Swivel versions
• Multiple thread variations available -
Metric, PG, NPT
• Tested and approved to the latest
National and International Standards
• Widest choice whatever
your application
Insert Clips Locknuts
Fixed External Swivel Fixed Internal Plain Hole Stainless Steel
IP68IP67IP66IP65IP54IP40 IP69K
BS EN IEC 61386
See Pg 20, 21, 22, 23, 24 & 25 See Pg 20 & 21
See Pg 78 & 79
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
Cable Gland
19
Braided Fittings Braided Compression Fittings Braided Fitting with Strain Relief
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
Accessories Elbows Couplers Reducers & Adaptors
See Pg 78 & 79
See Pg 35, 38, 39, 40 & 41
LTP Fitting with Strain Relief
EXD Flameproof Barrier Glands
FL Straight ULTRASCREEN® External
ULTRASCREEN® Internal
Liquid Tight Fittings Liquid Tight Stainless Steel
See Pg 32 & 33
See Pg 26 & 27 See Pg 29
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
See Pg 43
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
See Pg 34 & 36 See Pg 43
FLP Straight
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
See Pg 31
See Pg 80
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
FU & SSU system galvanised steel and stainless steel
20
ww
w.fl
exic
on.u
k.co
m
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
FU10-M12-MFU12-M16-MFU16-M16-MFU16-M20-MFU20-M20-MFU25-M25-MFU32-M32-MFU40-M40-MFU50-M50-MFU63-M63-MFU75-M75-M
FU10-PG7-MFU12-PG9-MFU16-PG11-M
FU20-PG16-MFU25-PG21-MFU32-PG29-MFU40-PG36-MFU50-PG48-M
SSU10-M12-MSSU12-M16-MSSU16-M16-M SSU20-M20-MSSU25-M25-MSSU32-M32-MSSU40-M40-MSSU50-M50-MSSU63-M63-M*
FU10-M12-SFU12-M16-SFU16-M16-SFU16-M20-SFU20-M20-SFU25-M25-SFU32-M32-SFU40-M40-SFU50-M50-SFU63-M63-S
FU10-PG7-SFU12-PG9-SFU16-PG11-SFU16-PG13-SFU20-PG16-SFU25-PG21-SFU32-PG29-SFU40-PG36-SFU50-PG42-S
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
reel
lengt
h (m
)
reel
lengt
h (m
)
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
PG th
read
part
num
ber
PG th
read
part
num
ber
SS
U
part
nu
mb
er
FU
nom
inal
size
(mm
)
1012161620253240506375
fixed external thread stainless steelTwo part fitting comprising shell and body with external thread. This fitting can be inserted into a knockout and secured with a locknut.
M-SS
swivel external thread nickel plated brassTwo part fitting comprising shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
S
fixed external thread nickel plated brassTwo part fitting comprising shell and body with external thread. This fitting can be inserted into a knockout and secured with a locknut.
M
Construction: Galvanised steel, helically wound, flexible conduit. Colour zinc, self colour.
Typical Applications: Underfloor wiring in office blocks.
FU
Construction: Stainless steel (grade 316), helically wound, flexible conduit. Colour stainless steel, self colour.
Typical Applications: Instrumentation and security.
part
nu
mb
er
FU10+ 25, 50 SSU10+ 10, 25 9.0 6.8 25FU12 25, 50 SSU12 10, 25 13.0 10.2 30 FU16 10, 25, 50 SSU16 10, 25 16.0 13.0 40
FU20 10, 25, 50 SSU20 10, 25 20.5 16.9 45FU25 10, 25, 50 SSU25 10, 25 25.0 21.1 55 FU32 10, 25 SSU32 10, 25 32.0 28.1 60 FU40 10, 25 SSU40 10 42.5 37.6 80FU50 10, 25 SSU50 10 53.0 48.4 90FU63 10 SSU63* 10 62.5 57.5 115FU75 10 77.0 70.0 150
IP68IP67IP66IP65IP54IP40 IP69K
SSU
CONDUIT FITTINGS
ORDERING NOTES
• Add reel length eg: FU20-25M for 25m reel
* Indicates parts made to order on request and
may be subject to MOQ and lead time
+ Double interlock section
• Available on request:
- longer lengths and bulk packaging
- cut lengths and assemblies
- alternative threads conduitthread
fitting type
How to read the fittings code
FU10-M12-M
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
• High mechanical strength
• Highly flexible
• Inherently Low Fire Hazard (LFH)
• Fully compliant to LUL Std I-085
• Temperature range -100˚C to +300˚C (FU)
-100˚C to +400˚C (SSU)
• IP rating: IP40
• SSU is highly corrosion resistant
• Nickel plated brass fittings
• Stainless steel (316) fittings
system properties
met
ric th
read
part
num
ber
plat
ed s
teel
part
num
ber
stain
less
stee
lpa
rt nu
mbe
r
1012161620253240506375
BM90-PG7BM90-16M BM90-16MBM90-20M BM90-20MBM90-25M BM90-32MBM90-40MBM90-50M
FCC10 FCC10-SS*FCC12 FCC12-SS*FCC16 FCC16-SSFCC16 FCC16-SSFCC20 FCC20-SSFCC25 FCC25-SSFCC32 FCC32-SSFCC40 FCC40-SSFCC50 FCC50-SS*FCC63 FCC75
9 FU10-P 12 FU12-P 16 FU16-P
20 FU20-P 25 FU25-P 32 FU32-P 40 FU40-P 51 FU50-P 61 FU63-P 75 FU75-P
part
num
ber
hole
size
(mm
)
met
ric th
read
part
num
ber
SSU10-M12-SSSU12-M16-SSSU16-M16-S SSU20-M20-SSSU25-M25-SSSU32-M32-S
plain hole connector nickel plated brassTwo part fitting comprising shell and body without thread. The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush.
P
swivel external thread stainless steelTwo part fitting comprising shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
S-SS
fixed internal thread nickel plated brassTwo part fitting comprising shell and body with internal thread which can be used to connect with an external thread.
F
plated steel P clip with pvc liner stainless steel P clipsP clip to support conduit.
FCC
internal and external threaded nickel plated brass elbow90˚ elbow which can be screwed onto external threaded fittings.
90° elbow
FU16-M16-FFU16-M20-FFU20-M20-FFU25-M25-FFU32-M32-F
part
num
ber
STANDARDS TECHNICAL DRAWING
BS EN IEC 61386 21
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FSU & FNU system galvanised steel pvc or nylon coated
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
22
ww
w.fl
exic
on.u
k.co
m
fixed external thread nickel plated brassTwo part fitting comprising shell and body with external thread. This fitting can be inserted into a knockout and secured with a locknut.
M
swivel external thread nickel plated brassTwo part fitting comprising shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
S
plain hole connector nickel plated brassTwo part fitting comprising shell and body without thread. The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush.
PFSU
FNU
Construction: Galvanised steel, helically wound, flexible conduit with pvc coating. Colour black. Grey or orange on request.*
Typical Applications: General factory wiring and connections to machines.
Construction: Galvanised steel, helically wound, flexible conduit with elastomeric nylon coating. Colour black.
Typical Applications: Demanding applications requiring higher temperatures or solvent and abrasion resistance.
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
CONDUIT FITTINGS
ORDERING NOTES• Add reel length eg: FSU20-25M for 25m reel
• FSU fittings used for FNU conduit
* Indicates parts made to order on request and may be subject to MOQ and lead time
+ Double interlock section
• Available on request: - low temperature (-40°C) version of FSU - longer lengths and bulk packaging - cut lengths and assemblies - other colours - stainless steel fittings (grade 316) - alternative threads- 45° elbows 16 to 32mm - UV resistant version of FSU
conduitthread
fitting type
How to read the fittings code
FSU10-M12-M
FSU10-M12-M FSU10-PG7-MFSU12-M16-M FSU12-PG9-MFSU16-M16-M FSU16-PG11-MFSU16-M20-M FSU20-M20-M FSU20-PG16-MFSU25-M25-M FSU25-PG21-MFSU32-M32-M FSU32-PG29-MFSU40-M40-M FSU40-PG36-MFSU50-M50-M FSU50-PG48-MFSU63-M63-MFSU75-M75-M
FSU10-M12-S FSU10-PG7-SFSU12-M16-S FSU12-PG9-SFSU16-M16-S FSU16-PG11-SFSU16-M20-S FSU16-PG13-SFSU20-M20-S FSU20-PG16-SFSU25-M25-S FSU25-PG21-SFSU32-M32-S FSU32-PG29-SFSU40-M40-S FSU40-PG36-SFSU50-M50-S FSU50-PG42-SFSU63-M63-S
9 FSU10-P 12 FSU12-P 16 FSU16-P
20 FSU20-P 25 FSU25-P 32 FSU32-P 40 FSU40-P 51 FSU50-P 61 FSU63-P 75 FSU75-P
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
reel
lengt
h (m
)
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
part
num
ber
PG th
read
part
num
ber
PG th
read
part
num
ber
hole
size
(mm
)
FS
U
part
num
ber
FN
U
nom
inal
size
(mm
)
10121616202532405063 75
FSU10B+ 25, 50 10.0 6.8 25FSU12B 25, 50 14.0 10.2 30 FSU16B 10, 25, 50 FNU16B 25 17.0 13.0 40
FSU20B 10, 25, 50 FNU20B 25 21.5 16.9 45 FSU25B 10, 25, 50 FNU25B 25 26.0 21.1 55 FSU32B 10, 25 FNU32B 10 34.0 28.1 60 FSU40B 10, 25 44.5 37.6 80 FSU50B 10, 25 55.0 48.4 90 FSU63B 10 64.5 57.5 115 FSU75B 10 79.0 70.0 150
• High mechanical strength
• Highly flexible
• IP rating: IP54 with standard fittings,
IP65 with type C compression fittings
• Temperature range -15˚C to +70˚C (FSU)
-40˚C to +120˚C (FNU)
• FNU offers high abrasion resistance
and solvent resistance
• Low Fire Hazard version available
(see type LFHU on page 24)
• Nickel plated brass fittings
FSU16-M16-FFSU16-M20-F FSU20-M20-F FSU25-M25-F FSU32-M32-F
FSU12-M16-C-SFSU16-M16-C-SFSU16-M20-C-SFSU20-M20-C-SFSU25-M25-C-SFSU32-M32-C-S
FSU10-M12-CFSU12-M16-CFSU16-M16-CFSU16-M20-CFSU20-M20-CFSU25-M25-CFSU32-M32-CFSU40-M40-CFSU50-M50-C
FSU12-PG9-CFSU16-PG11-CFSU16-PG13-CFSU20-PG16-CFSU25-PG21-CFSU32-PG29-C
FSU12-M16-C90FSU16-M16-C90FSU16-M20-C90FSU20-M20-C90FSU25-M25-C90FSU32-M32-C90
FSU16-050-C FSU20-050-CFSU25-075-CFSU32-100-C
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
NPT
thre
adpa
rt nu
mbe
r
PG th
read
part
num
ber
FSU20-FSU20FSU25-FSU25
part
num
ber
nom
inal
size
(mm
)
10121616202532405063 75
fixed internal thread nickel plated brassTwo part fitting comprising shell and body with internal thread which can be used to couple two pieces of conduit together when used with a swivel fitting.
F
external thread nickel plated brassMultipart compression fitting including elastomeric seal. Can be used for knockouts or threaded entries as fitting rotates until tightened.
C
external thread nickel plated brassMultipart compression fitting including elastomeric seal. The external thread swivels about the main body even after tightening.
C-S
external thread elbow nickel plated brassMultipart 90˚ compression fitting including elastomeric seal.
C90
insert nickel plated brassSingle part, machined insert to cap end of conduit.
nickel plated brass Multi part compression coupler including nylon seals to join 2 conduits.
E
FSU10-EFSU12-EFSU16-EFSU16-EFSU20-EFSU25-E FSU32-EFSU40-EFSU50-E FSU63-EFSU75-E
part
num
ber
coupler
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
STANDARDS
BS EN IEC 61386
properties
TECHNICAL DRAWING
23
LFHU system galvanised steel LFH coated
FPU system galvanised steel polyurethane coated
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
24
ww
w.fl
exic
on.u
k.co
m
• For LFH performance see page 94
Important Note
plain hole connector nickel plated brasTwo part fitting comprising shell and body without thread. The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush.
P
IP68IP67IP66IP65IP54IP40 IP69K
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
CONDUIT FITTINGS
ORDERING NOTES
• Available on request: - longer lengths and bulk packaging - cut lengths and assemblies additional sizes- stainless steel fittings (grade 316)- alternative threads- full copies of independent test reports confirming screening effectiveness- 45° C type elbows 16 to 32mm
conduitthread
fitting type
How to read the fittings code
FSU10-M12-M
FPU
Construction: Galvanised steel, helically wound, flexible steel conduit with low temperature, high abrasion, high fatigue life halogen free polyurethane coating. Colour black and metallic blue.
Typical Applications: Where low temperature and mechanical strength are important.
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
part
num
ber
PG th
read
part
num
ber
PG th
read
part
num
ber
hole
size
(mm
)
fixed external thread nickel plated brassTwo part fitting comprising shell and body with external thread. This fitting can be inserted into a knockout and secured with a locknut.
M
IP68IP67IP66IP65IP54IP40 IP69K
swivel external thread nickel plated brassTwo part fitting comprising shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
S
IP68IP67IP66IP65IP54IP40 IP69K
LFHU
Construction: Galvanised steel, helically wound, flexible steel conduit with Low Fire Hazard (LFH) coating. Colour black.
Typical Applications: Public and commercial buildings and tunnels.
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
reel
lengt
h (m
)
LF
HU
part
num
ber
FP
U
FSU12-M16-M FSU12-PG9-MFSU16-M16-M FSU16-PG11-MFSU16-M20-M FSU20-M20-M FSU20-PG16-MFSU25-M25-M FSU25-PG21-MFSU32-M32-M FSU32-PG29-MFSU40-M40-M FSU40-PG36-MFSU50-M50-M FSU50-PG48-MFSU63-M63-M FSU75-M75-M
FSU12-M16-S FSU12-PG9-SFSU16-M16-S FSU16-PG11-SFSU16-M20-S FSU16-PG13-SFSU20-M20-S FSU20-PG16-SFSU25-M25-S FSU25-PG21-SFSU32-M32-S FSU32-PG29-SFSU40-M40-S FSU40-PG36-SFSU50-M50-S FSU50-PG42-SFSU63-M63-S
12 FSU12-P 16 FSU16-P
20 FSU20-P 25 FSU25-P 32 FSU32-P 40 FSU40-P 51 FSU50-P 61 FSU63-P 75 FSU75-P
LFHU12B* 25 FPU12B* 25 14.0 10.2 30LFHU16B 25, 50 FPU16B* 25, 50 17.0 13.0 40 LFHU20B 25, 50 FPU20B* 25, 50 21.5 16.9 45LFHU25B 25, 50 FPU25B* 25 26.0 21.1 55LFHU32B 10, 25 FPU32B* 25 34.0 28.1 60LFHU40B 10, 25 FPU40B* 10 44.5 37.6 80LFHU50B 10, 25 FPU50B* 10 55.0 48.4 90LFHU63B 10 FPU63B* 10 64.5 57.5 115LFHU75B 10 FPU75B* 10 79.0 70.0 150
nom
inal
size
(mm
)
12161620253240506375
• Add reel length eg: LFHU20B-25M for 25m reel
• FSU fittings used on LFHU conduit
• For metallic blue change B to BU eg FPU20BU-25m
* Indicates parts made to order on request and may be subject to MOQ and lead time
• High mechanical strength
• Highly flexible
• IP rating: IP54 with standard fittings,
IP65 with type C compression fittings
• Extra low Fire Hazard UL94 V0, for LFH see page 94 (LFHU)
• High fatigue life and high abrasion resistant (FPU)
• Halogen, sulphur and phosphorus free
• Compliant to LUL Std 1-085 (LFHU)
• Temperature range: -25˚C to +90˚C (LFHU)
-40˚C to +80˚C (FPU)
• Nickel plated brass fittings
• Vibration and shock tested to EN61373 Cat 2
FSU16-M16-FFSU16-M20-F FSU20-M20-F FSU25-M25-F FSU32-M32-F
FSU12-M16-C-SFSU16-M16-C-SFSU16-M20-C-SFSU20-M20-C-SFSU25-M25-C-SFSU32-M32-C-S
FSU12-M16-CFSU16-M16-CFSU16-M20-CFSU20-M20-CFSU25-M25-CFSU32-M32-CFSU40-M40-CFSU50-M50-C
FSU12-PG9-CFSU16-PG11-CFSU16-PG13-CFSU20-PG16-CFSU25-PG21-CFSU32-PG29-C
FSU12-M16-C90FSU16-M16-C90FSU16-M20-C90FSU20-M20-C90FSU25-M25-C90FSU32-M32-C90
FSU16-050-C FSU20-050-CFSU25-075-CFSU32-100-C
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
NPT
thre
adpa
rt nu
mbe
r
PG th
read
part
num
ber
FSU20-FSU20FSU25-FSU25
part
num
ber
nom
inal
size
(mm
)
121616202532405063 75
fixed internal thread nickel plated brassTwo part fitting comprising shell and body with internal thread which can be used to couple two pieces of conduit together when used with a swivel fitting.
F
external thread nickel plated brassMultipart compression fitting including elastomeric seal. Can be used for knockouts or threaded entries as fitting rotates until tightened.
C
external thread nickel plated brassMultipart compression fitting including elastomeric seal. The external thread swivels about the main body even after tightening.
C-S
external thread elbow nickel plated brassMultipart 90˚ compression fitting including elastomeric seal.
C90
insert nickel plated brassSingle part, machined insert to cap end of conduit.
E
FSU12-EFSU16-E FSU16-EFSU20-E FSU25-E FSU32-EFSU40-E FSU50-E FSU63-E FSU75-E
part
num
ber
coupler
nickel plated brassMulti part compression coupler including nylon seals to join 2 conduits.
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
STANDARDS
BS EN IEC 61386
properties
* refer to conduit properties for applicable standards
TECHNICAL DRAWING
25
LTP, LTPHC, LTPUL & LTPE galvanised steel, plastic coated liquid tight
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
26
ww
w.fl
exic
on.u
k.co
m
met
ric th
read
part
num
ber
NPT
thre
adpa
rt nu
mbe
r
PG th
read
part
num
ber
external threadnickel plated brassMultipart compression fitting including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
C
LTP10-M12-CLTP10-M16-CLTP12-M16-CLTP16-M16-CLTP16-M20-CLTP20-M20-CLTP25-M25-CLTP32-M32-CLTP40-M40-CLTP50-M50-CLTP63-M63-C
LTP12-PG9-CLTP16-PG11-CLTP16-PG13-CLTP20-PG16-CLTP25-PG21-CLTP32-PG29-CLTP40-PG36-CLTP50-PG42-CLTP63-PG48-C
LTP16-050-CLTP20-050-CLTP25-075-CLTP32-100-CLTP40-125-C
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
CONDUIT FITTINGS
ORDERING NOTES
• Add reel length eg: LTP20B-25M for a 25m reel
• For LTP specify colour (B = Black, G = Grey)
* Indicates parts made to order on request and may be subject to MOQ and lead time
+ Double interlock section
• Available on request: - longer lengths and bulk packaging- cut lengths and assemblies- C-S with PG threads- other colours- internal thread fittings
conduitthread
fitting type
How to read the fittings code
LTP20-M20-C
ou
tsid
e d
ia (
mm
)
US
tra
de s
ize (
“)
insi
de d
ia (
mm
)
min
insid
e be
nd
radi
us (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
reel
lengt
h (m
)
LT
P
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
LT
PH
C
part
num
ber
LT
PU
L
LT
PE
nom
inal
size
(mm
)
1010121616202532405063
LTP
LTPHC
LTPUL
LTPE
Construction: Galvanised steel, helically wound, flexible conduit with smooth thermoplastic rubber cover. Colour black.
Typical Applications: Machine tools or outdoor installations where low or high temperature rating is required. ie. food processing
Construction: Galvanised steel, helically wound, flexible conduit with smooth oil resistant and high temperature pvc cover. Colour black. Grey or orange on request.*
Typical Applications: Machine tools or outdoor installations where liquid tight is a requirement.
Construction: Galvanised steel, helically wound, flexible steel conduit including copper bonding strip (up to 32mm) with smooth pvc cover. Colour black.
Typical Applications: As for LTP but where UL listing or CSA approval is required.
Construction: Galvanised steel, helically wound, flexible conduit with smooth pvc cover. Colour black.
Typical Applications: Machine tools or outdoor installations where liquid tight is a requirement.
1⁄4 11.8 7.0 LTP10B+ 50 35
5⁄16 14.2 10.0 LTP12B 25, 50 40 LTPHC12B 25 40 3⁄8 17.8 12.6 LTP16B 10, 25, 50 45 LTPHC16B 25 45 LTPUL16B 25 50
1⁄2 21.1 16.0 LTP20B 10, 25, 50 65 LTPHC20B 25 65 LTPUL20B 25 90 3⁄4 26.4 21.0 LTP25B 10, 25, 50 100 LTPHC25B 25 100 LTPUL25B 25 110
1 33.1 26.5 LTP32B 10, 25 135 LTPHC32B 25 135 LTPUL32B 15 140
11⁄4 41.8 35.4 LTP40B 10, 25 175 LTPHC40B 10 175 LTPUL40B 15 180
11⁄2 47.9 40.4 LTP50B+ 10, 25 230 LTPHC50B+ 10 230 LTPUL50B+ 15 230
2 59.7 51.6 LTP63B+ 10, 25 280 LTPHC63B*+10 280 LTPUL63B+ 15 280
LTPE16B 25 45
LTPE20B 25 65
LTPE25B 25 100
LTPE32B 10, 25 135
LTPE40B* 10, 25 175
LTPE50B* 10, 25 230
LTPE63B* 10, 25 280
min
insid
e be
nd
radi
us (m
m)
reel
lengt
h (m
)
part
num
ber
Note: Stainless steel fittings also available see page 29
• High mechanical strength
• IP rating: IP66 + IP67 + IP68 (5 bar) + IP69K
• Smooth, wipe clean outer cover
• Cover does not wrinkle when bent
• Temperature range -20˚C to +105˚C (LTP)
-45˚C to +135˚C (LTPHC)
-15˚C to +75˚C (LTPUL)
-15˚C to +70˚C (LTPE)
• LTP has Lloyd’s Register Type Approval
• LTPUL conduits are UL listed and CSA approved
• Resistant to oils and greases (except LTPE)
• Good flexibility
• UV resistant (black) and suitable for external use
• Nickel plated brass or stainless steel fittings
as shown on page 29
• Vibration and shock tested to EN61373 Cat 2
nom
inal
size
(mm
)1010121616202532405063
LTP10-ELTP10-ELTP12-ELTP16-ELTP16-ELTP20-ELTP25-ELTP32-ELTP40-ELTP50-ELTP63-E
plat
ed s
teel
part
num
ber
stain
less
stee
lpa
rt nu
mbe
r
FCC10 FCC10-SS*FCC10 FCC10-SS*FCC12 FCC12-SS*FCC16 FCC16-SSFCC16 FCC16-SSFCC20 FCC20-SSFCC25 FCC25-SSFCC32 FCC32-SSFCC40 FCC40-SSFCC50 FCC50-SS*FCC63
STANDARDS TECHNICAL DRAWING
27* refer to conduit properties for applicable standards
BS EN IEC 61386
properties
swivel external thread nickel plated brassCompression fitting for knockout or threaded entries.
Multipart compression fitting including elastomeric seal. The external thread swivels about the main body even after tightening.
C-S
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
external threadnickel plated brass90˚ multipart compression fitting including nylon seal. Can be used for knockout.
C90
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
external threadnickel plated brass45˚ multipart compression fitting including nylon seal. Can be used for knockout.
C45
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
nickel plated brassMulti part compression coupler including nylon seals to join 2 conduits.
coupler
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
insert nickel plated brassSingle part, machined insert to cap end of conduit.
E
plated steel P clip with pvc liner stainless steel P clipsP clip to support conduit.
FCC
LTP12-M16-C90LTP16-M16-C90LTP16-M20-C90LTP20-M20-C90LTP25-M25-C90LTP32-M32-C90LTP40-M40-C90LTP50-M50-C90LTP63-M63-C90
LTP12-M16-SLTP16-M16-SLTP16-M20-SLTP20-M20-SLTP25-M25-SLTP32-M32-SLTP40-M40-SLTP50-M50-S
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
part
num
ber
LTP16-M20-C45LTP20-M20-C45LTP25-M25-C45LTP32-M32-C45LTP40-M40-C45LTP50-M50-C45LTP63-M63-C45
LTP20-LTP20LTP25-LTP25
part
num
ber
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
28
ww
w.fl
exic
on.u
k.co
mSpecialist liquid tight productsLTPSS system stainless steel pvc coated liquid tight
ORDERING NOTES
CONDUIT FITTINGS
• Add reel length eg: LTPSS20B-25M for a 25m reel
• Stainless Steel LTP fittings can be used with any of the conduits shown on page 26
• Add colour for LTPPU ie B=Black, BU=Blue eg. LTPPU20B is Black
* Indicates parts made to order on request and may be subject to MOQ and lead time
• Available on request: - longer lengths and bulk packaging- cut lengths and assemblies- other colours- 45 degree stainless steel elbows
conduitthread
fitting type
How to read the fittings code
LTP20-M20-C
met
ric th
read
part
num
ber
NPT
thre
adpa
rt nu
mbe
r
PG th
read
part
num
ber
external threadnickel plated brassMultipart compression fitting including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
C
LTP10-M12-CLTP10-M16-CLTP12-M16-CLTP16-M16-CLTP16-M20-CLTP20-M20-CLTP25-M25-CLTP32-M32-CLTP40-M40-CLTP50-M50-CLTP63-M63-C
LTP12-PG9-CLTP16-PG11-CLTP16-PG13-CLTP20-PG16-CLTP25-PG21-CLTP32-PG29-CLTP40-PG36-CLTP50-PG42-CLTP63-PG48-C
LTP16-050-CLTP20-050-CLTP25-075-CLTP32-100-C LTP40-125-C
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
LTPPU system galvanised steel, polyurethane coated liquid tight
ou
tsid
e d
ia (
mm
)
US
tra
de s
ize (
“)
insi
de d
ia (
mm
)
min
insid
e be
nd
radi
us (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
reel
lengt
h (m
)
LT
PS
S
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
LT
PP
U
part
num
ber
LT
BR
DP
LT
BR
DL
FH
nom
inal
size
(mm
)
1010121616202532405063
LTPSS
LTPPU
LTBRDP
LTBRDLFH
Construction: Galvanised steel, helically wound, flexible steel conduit with smooth halogen free polyurethane cover. Colour black and blue.
Typical Applications: Where low temperature performance, high abrasion, high fatigue life and liquid tight are a requirement.
Construction: Stainless steel (316), helically wound, flexible conduit with oil resistant and high temperature pvc smooth cover. Colour black.
Typical Applications: Food processing machinery or outdoor applications where high corrosion resistance and liquid tight are a requirement.
Construction: Galvanised steel, helically wound, flexible conduit with galvanised steel braid and oil resistant and high temperature pvc smooth cover. Colour black.
Typical Applications: Machinery or outdoor applications where high corrosion resistance and liquid tight are a requirement combined with EMC screening
Construction: Galvanised steel, helically wound, flexible conduit with galvanised steel braid and smooth LFH cover. Colour black.
Typical Applications: Installations where liquid tight is a requirement and where low fire hazard properties and EMC screening are required.
1⁄4 11.8 7.0 LTPPU10* 25 35
5⁄16 14.2 10.0 LTPPU12* 25 40 3⁄8 17.8 12.6 LTPSS16* 25 45 LTPPU16* 25 45
1⁄2 21.1 16.0 LTPSS20 25 65 LTPPU20* 25 65 LTBRDP20B 25 65 3⁄4 26.4 21.0 LTPSS25 25 100 LTPPU25* 25 100 LTBRDP25B 25 100
1 33.1 26.5 LTPSS32 10 135 LTPPU32* 25 135 LTBRDP32B 25 120
11⁄4 41.8 35.4 LTPPU40* 10 175 LTBRDP40B 10 140
11⁄2 47.9 40.4 LTPPU50* 10 230 LTBRDP50B 10 180
2 59.7 51.6 LTPPU63* 10 280
LTBRDLFH20B* 25 130
LTBRDLFH25B* 25 200
LTBRDLFH32B* 25 270
min
insid
e be
nd
radi
us (m
m)
reel
lengt
h (m
)
part
num
ber
• High mechanical strength
• Good flexibility
• IP rating: IP66 + IP67 +
IP68 (5 bar) + IP69K
• Smooth, wipe clean outer cover
• Cover does not wrinkle when bent
• Resistant to oils and greases
• Temperature range:
-20˚C to +105˚C (LTPSS & LTBRDP)
-20˚C to +90˚C (LTBRDLFH)
-40˚C to +80˚C (LTPPU)
• UV resistant and suitable for external use
• High abrasion, high fatigue life (LTPPU)
• Vibration and shock tested to EN61373 Cat 2
• Provides EMC screening (LTBRDP, LTBRDLFH)
• Compliant to LUL Std 1-085 (LTBRDLFH)
STANDARDS
10101216162025324050
nom
inal
size
(mm
)
FCC16-SSFCC16-SS FCC20-SSFCC25-SSFCC32-SSFCC40-SSFCC50-SS*
SS-M16SS-M20SS-M20SS-M25SS-M32SS-M40SS-M50
part
num
ber
part
num
ber
stainless steel (316) P clipsP clip to support conduit.
stainless steel (316) locknutsHexagonal locknut to secure fitting.
LOCKNUTS FCC-SS
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
LTP16-M16-CSSLTP16-M20-CSSLTP20-M20-CSSLTP25-M25-CSSLTP32-M32-CSSLTP40-M40-CSSLTP50-M50-CSS
LTP16-M20-CSS90LTP20-M20-CSS90LTP25-M25-CSS90LTP32-M32-CSS90LTP40-M40-CSS90LTP50-M50-CSS90
external thread stainless steelMultipart compression fitting with Stainless Steel (316) body and nut and nickel plated brass insert, including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
external thread stainless steel (316) 90˚ multipart compression fitting with Stainless Steel (316) body and nut and nickel plated brass insert, including nylon seal. Can be used for knockout.
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
C-SS C-90-SS
BS EN IEC 61386
properties
TECHNICAL DRAWING
29
EMC SCREENING PERFORMANCE
0
10
20
30
40
50
60
70
80
90
100
0.1 1 10 100 1000
Sh
ield
ing
Eff
ecti
ven
ess
(dB
)
Frequency (MHz) LTBRDP & LTBRDLFH
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
LTBRDLFH system galv steel, galv steel braid, LFH coated liquid tight
LTBRDP system galv steel, galv steel braid, pvc coated liquid tight
* refer to conduit properties for applicable standards
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
30
ww
w.fl
exic
on.u
k.co
mHazardous area liquid tight conduit solutionsEXD Conduit Glands Flameproof EXD Barrier gland
ORDERING NOTES
HAzARDOUS AREA CLASSIFICATIONS AND zONES
• Additional epoxy compound packs - contact us
• NPT threads on request
• Stainless steel (316) on request
• EXD Reducers, enlargers, thread convertors and stop plugs on request
• Face sealing washers are sold separately
Introduction
Hazardous Areas exist where a flammable mixture of gas
and air, or dust and air, can exist in large enough quantities
and for long enough periods to create a risk of explosion if
an ignition source is present. Wherever possible it is
important to minimise the risk of explosive mixtures forming
and / or the risk of ignition. In the instances where this is
impossible or impractical then means of providing a level of
protection are required.
This guide will briefly explain how people and plant can be
protected in hazardous areas. The guide is particularly
focussed towards applications for the Flexicon EXD conduit
gland and is not intended to be a full guide to hazardous
areas. Users of this conduit gland should be fully qualified,
competent and conversant with hazardous area
requirements.
Flammable mixtures and ignition sources
Flammable gases when mixed with air can be explosive.
Gases are categorised into 3 groups with Group A being
the least explosive and Group C being the most explosive.
Equipment is also classified from T1 to T6 according to
maximum allowed temperature resulting from the ignition
temperature of the gas/air mix
Certain fine dusts dispersed in air can also be explosive
Ignition sources include: sparking due to static discharge,
electrical arcs, lightning, hot engine exhaust, hot
equipment and heat from chemical reactions.
Hazardous Area zones
The level of risk in hazardous areas is defined by a
zoning system.
Zone 0 An area where an explosive gas atmosphere is present
continuously or for long periods of time.
Zone 1 An area where an explosive gas atmosphere may exist
under normal operating conditions.
Zone 2 An area where an explosive gas atmosphere is not likely to
exist under normal operating conditions, but if it does it will
exist only for a short period of time.
Zone 21 An area, in which combustible dust, as a cloud, is
occasionally present during normal operation, in sufficient
quantity to be capable of producing an explosive
concentration of combustible dust in a mixture with air.
Zone 22 An area, in which combustible dust, as a cloud, may occur
infrequently and persist for only a short period, or in which
accumulations of layers of combustible dust may give rise
to an explosive concentration of combustible dust in a
mixture with air.
Flexicon EXD barrier glands can be used in zone 1 and
zone 2 areas where Group A, B or C gases are present. As
the gland does not add to the temperature of the
enclosure, it does not have a temperature classification and
so can be used with all temperature classes. Flexicon EXD
barrier glands can be used in zone 21 and zone 22 where
explosive dust may be present.
TECHNICAL DRAWING
ZONE 1
A1PETROLEUM
ZONE 1
ZONE 0
ZONE 0
ZONE 2
• IP Rating: IP66 + IP67 + IP68 (5bar) + IP69K
• Material: Nickel Plated Brass
• Suitable for threaded entries
• Operating Temperature of gland -60˚C to +85˚C
• High mechanical strength
• Can be used with individual cores or oversheathed cable
• Can be used in zone 1, zone 2, zone 21 and zone 22
Hazardous areas when used with Flexicon’s Liquid Tight
range of flexible conduits
• ATEX and IECEx EX d (Flameproof)
• ATEX and IECEx EX e (Increased Safety)
• ATEX and IECEx EX t (Dust Ignition Protection)
STANDARDS
31BS EN IEC 61386
properties
Part No. To fit Conduit Size (mm) Thread Size
LTP16-M20-EXD 16 M20 LTP20-M20-EXD 20 M20LTP25-M25-EXD 25 M25LTP32-M32-EXD 32 M32LTP40-M40-EXD 40 M40LTP50-M50-EXD 50 M50LTP63-M63-EXD 63 M63
Hazardous area ApprovalsATEX APPROVAL: Sira Certificate No Sira 10ATEX1172XEx d FLAMEPROOF Ex d IIC Gb EN 60079-1 2007Ex e INCREASED SAFETY Ex e IIC Gb EN 60079-7 2007Ex t DUST IGNITION PROTECTION Ex ta IIIC Da IP6X IEC 60079-31 2008
IECEx APPROVAL Sira Certificate No IECEx SIR 10.0094XEx d FLAMEPROOF Ex d IIC Gb IEC 60079-1 2007Ex e INCREASED SAFETY Ex e IIC Gb IEC 60079-7 2006-7Ex t DUST IGNITION PROTECTION Ex ta IIIC Da IP6X IEC 60079-31 2008
LTP - EXD
Construction: Nickel Plated Brass fitting with a nylon seal and two part epoxy resin pack. Supplied in boxes of one complete with instructions and gloves.
Typical Applications: Flameproof barrier gland offering
a high specification high quality solution for Ex d, Ex e
and Ex t applications. IP rating: IP66, + IP67 +
IP68(5bar) + IP69K
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
0518
FL system galvanised steel pliable
FLP system galvanised steel pvc coated, pliable
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
32
ww
w.fl
exic
on.u
k.co
m
IP68IP67IP66IP65IP54IP40 IP69K
C Type
external thread nickel plated brass
Multipart compression fitting
including nylon compression seal.
Can be used for knockout or
threaded entries as fitting rotates
until tightened. Provides EMC
screening.
CONDUIT
TECHNICAL DRAWING
FITTINGS
• High compression strength
• Pull off strength: Type C 50kg (20mm)
• Provides EMC screening
• IP rating: IP66 + IP67 for Type C
• Smooth, wipe clean outer cover
• Does not wrinkle when bent
• Can be formed into shape requiring fewer clips
• Temperature range -15˚C to +70˚C
• Lloyd’s Register Type Approved
STANDARDS
* refer to conduit properties for applicable standards
BS EN IEC 61386
FL
Construction: Corrugated galvanised steel with kraft paper lining. Colour, zinc self colour.
Typical Applications: Any installation where there is no movement.
FLP
Construction: Corrugated galvanised steel with kraft paper lining and smooth pvc outer cover. Colour black.
Typical Applications: Any installation where there is no movement and a high IP rating is required.
C Type
external threadnickel plated brass
Multipart compression fitting
including serrated nylon seal. Can
be used for knockout or threaded
entries as fitting rotates until
tightened. Provides EMC screening
once pvc is trimmed from end of
conduit.
FITTINGSCONDUIT
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
• High compression strength • Provides EMC screening
• IP rating: IP40, • Can be formed into shape requiring fewer clips
• Temperature range -40˚C to +120˚C
• Nickel plated brass fittings
• Inherently low fire hazardou
tsid
e di
a (m
m)
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
met
ric th
read
pa
rt nu
mbe
r
part
num
ber
reel
lengt
h (m
)
FL
nom
inal
size
(mm
)
162025324050
FL20 25 19.0 14.6 35 FL20-M20-CFL25 25 25.1 20.4 45 FL25-M25-C
min
insid
e be
nd
radi
us (m
m)
met
ric th
read
pa
rt nu
mbe
r
part
num
ber
reel
lengt
h (m
)
FL
P
nom
inal
size
(mm
)
162025324050
FLP16B 25 35 17.8 FLP16-M16-CFLP20B 10,25,50 35 20.9 FLP20-M20-CFLP25B 10,25,50 45 27.3 FLP25-M25-CFLP32B 10,30 55 34.0 FLP32-M32-CFLP40B 25 70 40.4 use C-HSFLP50B 20 110 53.1 use C-HS
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
LFHP
Construction: Corrugated galvanised steel with kraft paper lining and smooth extra LFH outer cover. Colour black.
Typical Applications: Any installation where there is no movement and a high IP rating is required.
EMC SCREENING PERFORMANCE
• Pull off strength: Type C-HS 100kg (20mm)
• Extra low fire hazard, oil resistant and UV resistant
• Vibration and shock tested to EN61373 Cat 2
• High compression strength 570kg/100mm
• Provides EMC screening
• IP rating: IP66 + IP67 + IP68 (5 bar) + IP69K
• Can be formed into shape requiring fewer clips
• Temperature range -25˚C to +90˚C
• Smooth, wipe clean outer cover
• Does not wrinkle when bent
• Lloyd's Register Type Approved
33
ORDERING NOTES
• Add reel length eg: FLP20B-25M for 25m reel
• Available on request: - longer lengths- cut lengths and assemblies- additional sizes- full copies of independent test report confirming screening effectiveness
conduitthread
fitting type
How to read the fittings code
FLP20-M20-C
LFHP20+FLP20-M20-C-HS fittings
Round brass box with 2 lengths of LFHP20+FLP20-M20-C-HS fittings
20mm LTBRD plastic coated + LTP 20-M20-C fittings
LFHP20+FLP20-M20-C-HS fittings
Round brass box with 2 lengths of LFHP20+FLP20-M20-C-HS fittings
20mm LTBRD plastic coated + LTP 20-M20-C fittings
Flexicon Ultrascreen™
C-HS
external thread brass - high specification
Multipart compression fitting
including serrated nylon seal. Can
be used for knockout or threaded
entries as fitting rotates until
tightened. Provides EMC screening
once cover is trimmed from end of
conduit.
F-HS
internal thread brass - high specification
Multipart compression fitting
including serrated nylon seal.
Provides EMC screening once cover
is trimmed from end of conduit.
FITTINGSCONDUIT
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
LFHP system galvanised steel extra LFH coated, pliable
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
met
ric th
read
part
num
ber
part
num
ber
reel
lengt
h (m
)
FL
HP
LFHP16B 25 40 17.8 11.6 FLP16-M16-C-HS FLP16-M16-F-HSLFHP20B 25 40 20.9 14.6 FLP20-M20-C-HS FLP20-M20-F-HSLFHP25B 25 55 27.3 20.4 FLP25-M25-C-HS FLP25-M25-F-HSLFHP32B 25 65 34.0 26.7 FLP32-M32-C-HS FLP32-M32-F-HSLFHP40B 25 85 40.4 32.8 FLP40-M40-C-HS FLP40-M40-F-HSLFHP50B 25 130 53.1 45.3 FLP50-M50-C-HS FLP50-M50-F-HS
met
ric th
read
pa
rt nu
mbe
r
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FSB system galvanised steel core, pvc coated, galvanised steel overbraidLFHUBRD system galvanised steel core, extra LFH coated, stainless steel overbraid
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
FS
B
part
num
ber
reel
lengt
h (m
)
LF
HU
BR
D
nom
inal
size
(mm
)
1216162025324050
FSB12-M16-MFSB16-M16-MFSB16-M20-MFSB20-M20-MFSB25-M25-MFSB32-M32-MFSB40-M40-MFSB50-M50-M
met
ric th
read
part
num
ber
FSB12-PG9-MFSB16-PG11-M
FSB20-PG16-MFSB25-PG21-MFSB32-PG29-MFSB40-PG36-M FSB50-PG48-M
PG th
read
part
num
ber
FSB12-M16-SFSB16-M16-SFSB16-M20-SFSB20-M20-SFSB25-M25-SFSB32-M32-SFSB40-M40-SFSB50-M50-S
met
ric th
read
part
num
ber
FSB12-PG9-SFSB16-PG11-S FSB20-PG16-SFSB25-PG21-SFSB32-PG29-SFSB40-PG36-SFSB50-PG42-S
PG th
read
part
num
ber
FSB12 25 15.2 10.2 30FSB16 25 18.2 13.0 40
FSB20 LFHUBRD20 25 22.7 16.9 45FSB25 LFHUBRD25 25 27.2 21.1 55FSB32 LFHUBRD32 25 35.2 28.1 70FSB40 10 45.7 37.6 80FSB50 10 57.7 48.4 90
34
ww
w.fl
exic
on.u
k.co
m
Construction: Galvanised steel, helically wound, flexible conduit with pvc coating and galvanised steel overbraid. Colour zinc, self colour.
Typical Applications: Industrial environments where higher abrasion resistance or screening are required.
Construction: Galvanised steel, helically wound, flexible conduit with extra LFH coating and stainless steel (316) overbraid.
Typical Applications: Metro rail stations where LFH, EMC screening and anti-vandal properties are required. Compliant to LUL std 1-085.
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
LFHUBRD
FSB
fixed external thread nickel plated brass Two part fitting comprising of shell and body with external thread. This fitting can be inserted into a knockout and secured with a locknut.
M
swivel external thread nickel plated brass Two part fitting comprising of shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
S
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
CONDUIT FITTINGS
STANDARDSORDERING NOTES
• Add reel length eg: FSB20-25M for 25m reel
• Available on request: - longer lengths, cut lengths and assemblies- additional sizes, stainless steel overbraided- PG threads, female threaded fittings- full copies of independent test report confirming screening effectiveness
How to read the fittings code
conduitthread
fitting type
FSB20-M20-M
* refer to conduit properties for applicable standards
BS EN IEC 61386
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
• High mechanical strength
• Tensile strength with standard fittings 120kg for 20mm size
• Tensile strength with C type fittings 300kg for 20mm size
• Highly flexible
• IP rating: IP54 for standard fittings, IP65 for C type fittings
• High abrasion resistance
• Resists hot metal swarf and splashes
• Provides EMC screening
• Temperature range
-15˚C to +70˚C (FSB)
-20˚C to +90˚C (LFHUBRD)
• LFHUBRD is extra low fire hazard
• Compliant to LUL Std 1-085 (LFHUBRD)
• Nickel plated brass fittings
• Vibration and shock tested to EN61373 Cat 2
12 FSB12-P16 FSB16-P
20 FSB20-P25 FSB25-P32 FSB32-P40 FSB40-P50 FSB50-P
part
num
ber
hole
size
(mm
)
FSB16-M16-CFSB16-M20-CFSB20-M20-CFSB25-M25-CFSB32-M32-C
met
ric th
read
part
num
ber
FSB16-PG11-CFSB16-PG13-CFSB20-PG16-CFSB25-PG21-CFSB32-PG29-C
PG th
read
part
num
ber
FSB16-M16-C90FSB16-M20-C90FSB20-M20-C90FSB25-M25-C90FSB32-M32-C90
met
ric th
read
part
num
ber
FSB16-M16-C-SFSB16-M20-C-SFSB20-M20-C-SFSB25-M25-C-SFSB32-M32-C-S
met
ric th
read
part
num
ber
nom
inal
size
(mm
)1216162025324050
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
plain hole connector nickel plated brass Two part fitting comprising of shell and body without thread. The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush.
P
fixed external thread nickel plated brass Multipart compression fitting including elastomeric seal. Can be used for knockouts. Braid is locked between inner and outer compression nuts.
C
swivel external thread nickel plated brass Multipart compression fitting including elastomeric seal can be used for knockouts or threaded entries. Braid is locked between inner and outer compression nuts.
C-S
external thread elbow nickel plated brass Multipart 90˚ compression fitting including elastomeric seal. Braid is locked between inner and outer compression nuts.
C90
EMC SCREENING PERFORMANCE TECHNICAL DRAWING
FSB LFHUBRD
properties
35
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
FB system galvanised steel core galvanised steel overbraidFUSSB system galvanised steel core stainless steel overbraid
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
36
ww
w.fl
exic
on.u
k.co
m
Construction: Galvanised steel, helically wound conduit with galvanised steel overbraid. Colour zinc, self colour.
Typical Applications: Industrial environments and high temperatures.
fixed external thread nickel plated brassTwo part fitting comprising shell and body with external thread. This fitting can be inserted into a knockout and secured with a locknut.
M
swivel external thread nickel plated brassTwo part fitting comprising shell and body. The external thread swivels about the main body. Can be used with threaded entries, or knockout secured with a locknut.
SFB
Construction: Galvanised steel, helically wound, flexible conduit with stainless steel (316) overbraid.
Typical Applications: Underground stations where LFH properties and EMC screening are required.
FUSSB
FB12-M16-MFB16-M16-MFB16-M20-MFB20-M20-MFB25-M25-MFB32-M32-MFB40-M40-MFB50-M50-M
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
met
ric th
read
part
num
ber
FB12-PG9-MFB16-PG11-M FB20-PG16-MFB25-PG21-MFB32-PG29-MFB40-PG36-MFB50-PG48-M
PG th
read
part
num
ber
FB12-M16-SFB16-M16-SFB16-M20-SFB20-M20-SFB25-M25-SFB32-M32-SFB40-M40-SFB50-M50-S
met
ric th
read
part
num
ber
FB12-PG9-SFB16-PG11-S FB20-PG16-SFB25-PG21-SFB32-PG29-SFB40-PG36-SFB50-PG42-S
PG th
read
part
num
ber
FB
part
num
ber
FU
SS
B
nom
inal
size
(mm
)
1216162025324050
FB12 25 14.0 10.2 30FB16 25 17.5 13.0 40
FB20 FUSSB20 25 21.5 16.9 45FB25 FUSSB25 25 26.0 21.1 55FB32 FUSSB32 25 34.0 28.1 70FB40 10 43.5 37.6 80FB50 10 54.5 48.4 90
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
CONDUIT FITTINGS
STANDARDSORDERING NOTES
• Add reel length eg: FB20-25M for 25m reel
* Indicates parts made to order on request and
may be subject to MOQ and lead time
• Available on request: - longer lengths, cut lengths and assemblies- additional sizes, stainless steel overbraided- PG threads, female threaded fittings- full copies of independent test report confirming screening effectiveness
conduitthread
fitting type
How to read the fittings code
FB20-M20-M
BS EN IEC 61386
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
• High mechanical strength
• Highly flexible
• IP rating: IP40
• High abrasion resistance
• Resists hot metal swarf and splashes
• Provides EMC screening
55dB@1MHz (FB)
49dB@1MHz (FUSSB)
• Temperature range -100˚C to +300˚C
• Inherently Low Fire Hazard (LFH)
• Fully compliant to LUL Std 1-085
• Nickel plated brass fittings
plain hole connectornickel plated brassTwo part fitting comprising shell and body without thread. The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush.
P
internal and external threaded nickel plated brass elbow90˚ elbow which can be screwed onto external threaded fittings.
90° elbow locknuts
plated steel P clip with pvc liner, stainless steel P clipsP clip to support conduit.
FCC
12 FB12-P16 FB16-P
20 FB20-P25 FB25-P32 FB32-P40 FB40-P51 FB50-P
part
num
ber
hole
size
(mm
)
met
ric th
read
part
num
ber
plat
ed s
teel
part
num
ber
stain
less
stee
lpa
rt nu
mbe
r
FCC12 FCC12-SS*FCC16 FCC16-SSFCC16 FCC16-SSFCC20 FCC20-SSFCC25 FCC25-SSFCC32 FCC32-SSFCC40 FCC40-SSFCC50 FCC50-SS*
nom
inal
size
(mm
)
1216162025324050
galvanised steel andnickel plated brass locknutsHexagonal locknut to secure fitting. EMC locknuts have raised corners to ensure good continuity.
TECHNICAL DRAWINGEMC SCREENING PERFORMANCE
FB FUSSB 33
S-M16S-M16S-M20S-M20S-M25S-M32S-M40S-M50
met
ric th
read
stee
lpa
rt nu
mbe
r
met
ric th
read
bras
spa
rt nu
mbe
r
met
ric th
read
EMC
part
num
ber
B-M16B-M16B-M20B-M20B-M25B-M32B-M40B-M50
B-M20-EMCB-M20-EMCB-M25-EMCB-M32-EMCB-M40-EMC
BM90-16MBM90-16MBM90-20MBM90-20MBM90-25MBM90-32MBM90-40MBM90-50M
properties
37
IP68IP67IP66IP65IP54IP40 IP69K
LTPBRD system galvanised steel core, thermoplastic rubbercoated and stainlesssteel overbraid
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
38
ww
w.fl
exic
on.u
k.co
m
external thread nickel plated brassMultipart compression fitting including nylon seal. Can be used for knockout. Braid is locked between inner and outer compression nuts.
C
Construction: Galvanised steel, helically wound, flexible conduit with thermoplastic rubber cover (same as LTPHC) and stainless steel (grade 316) overbraid.
Typical Applications: Very arduous industrial environments such as steel works.
LTPBRD
swivel external thread nickel plated brassMultipart compression fitting including nylon seal can be used for knockouts or threaded entries. Braid is locked between inner and outer compression nuts.
C-S
LTPB16-M16-CLTPB16-M20-CLTPB20-M20-CLTPB25-M25-CLTPB32-M32-CLTPB40-M40-CLTPB50-M50-C
LTPB16-M16-SLTPB16-M20-SLTPB20-M20-SLTPB25-M25-SLTPB32-M32-SLTPB40-M40-SLTPB50-M50-S
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
LT
PB
RD
nom
inal
size
(mm
)
16162025324050
LTPBRD16 25 19.3 12.6 45 LTPBRD20 25 22.6 16.0 65LTPBRD25 25 27.9 21.0 100LTPBRD32 25 34.6 26.5 135LTPBRD40 10 43.3 35.4 175LTPBRD50+ 10 49.3 40.4 230
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
CONDUIT FITTINGS
STANDARDSORDERING NOTES
• Add reel length eg: LTPBRD20B-25M for 25m reel
* Indicates parts made to order on request and may be subject to MOQ and lead time
+ Double interlock section
• Available on request: - longer lengths- 45° available in sizes 16-50mm- cut lengths and assemblies- additional sizes- full copies of independent test report confirming screening effectiveness
conduitthread
fitting type
How to read the fittings code
LTPB20-M20-M BS EN IEC 61386
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
C90 elbow locknutssealingwashers
external threaded elbow nickel plated brassMultipart compression fitting including nylon seal. Braid is locked between inner and outer compression nuts.
plated steel P clip with pvc liner,stainless steel P clipsP clip to support conduit.
fibre face sealing washersSealing washer to maintain IP rating of fitting to adjacent equipment.
FCC
LTPB16-M16-C90LTPB16-M20-C90LTPB20-M20-C90LTPB25-M25-C90LTPB32-M32-C90LTPB40-M40-C90LTPB50-M50-C90
met
ric th
read
part
num
ber
FCC16
FCC20FCC25FCC32FCC40FCC50
plat
ed s
teel
part
num
ber
FCC16-SS
FCC20-SSFCC25-SSFCC32-SSFCC40-SSFCC50-SS*
stain
less
stee
lpa
rt nu
mbe
r
nom
inal
size
(mm
)
16162025324050
part
num
ber
FW16FW20FW20FW25FW32FW40FW50
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
EMC SCREENING PERFORMANCE
LTPBRD
galvanised steel and nickel plated brass locknutsHexagonal locknut to secure fitting. EMC locknuts have raised corners to ensure good continuity.
S-M16 S-M20S-M25S-M32S-M40S-M50
met
ric th
read
stee
lpa
rt nu
mbe
r
met
ric th
read
bras
spa
rt nu
mbe
r
B-M16 B-M20B-M25B-M32B-M40B-M50
met
ric th
read
EMC
part
num
ber
B-M20-EMCB-M25-EMCB-M32-EMCB-M40-EMC
properties
TECHNICAL DRAWING
• High mechanical strength
• Good flexibility
• IP rating: IP66 + IP67 + IP68 (5 bar) IP69K
• Temperature range -45˚C to +135˚C
• High abrasion resistance
• Very high tensile strength
• Vibration and shock tested to EN61373 Cat 2
39
FPRSS system corrugated nylon, stainless steel overbraid
FPRTC system corrugated nylon, tinned copper overbraid
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
40
ww
w.fl
exic
on.u
k.co
m
fixed external thread nickel plated brassMultipart compression fitting including conduit retention clip and elastomeric seal. Can be used with knockouts. Braid is locked between inner and outer compression nuts.
C
swivel external thread nickel plated brassMultipart compression fitting including conduit retention clip and elastomeric seal. Can be used for knockouts and threaded entries. Braid is locked between inner and outer compression nuts.
C-S
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
CONDUIT FITTINGS
STANDARDSORDERING NOTES
* Indicates parts made to order on request and may be subject to MOQ and lead time
• Available on request: - longer lengths- cut lengths and assemblies- additional sizes- full copies of independent test report- confirming screening effectiveness
conduitthread
fitting type
How to read the fittings code
BC21-M20-C
BC16-M16-CBC21-M20-CBC28-M25-CBC34-M32-CBC42-M40-CBC54-M50-C
BC16-M16-SBC21-M20-SBC28-M25-SBC34-M32-SBC42-M40-SBC54-M40-S
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
BC16-PG11-SBC21-PG16-SBC28-PG21-SBC34-PG29-S
PG th
read
part
num
ber
outs
ide
dia
(mm
)
min
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
FP
RS
S
part
num
ber
FP
RT
C
part
num
ber
FP
IS
S
part
num
ber
FP
IH
SS
nom
inal
size
(mm
)
162025324050
FPRSS16-50M FPRTC16-50M* FPISS16-50M* FPIHSS16-50M 17.3 11.5 35FPRSS21-50M FPRTC21-50M* FPISS21-50M* FPIHSS21-50M 22.7 15.0 45FPRSS28-50M FPRTC28-50M* FPISS28-50M* FPIHSS28-50M 30.0 21.3 50FPRSS34-50M FPRTC34-50M* FPISS34-25M* FPIHSS34-25M 36.0 26.9 60FPRSS42-25M* FPRTC42-25M* FPISS42-25M* FPIHSS42-25M* 44.0 35.5 70FPRSS54-25M* FPRTC54-25M* FPISS54-25M* FPIHSS54-25M* 46.0 47.2 80
BS EN IEC 61386
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
FPRSS FPRTC
Construction: Standard weight, extra low fire hazard, corrugated nylon (PA6), with tinned copper overbraid.
Typical Applications: Inside railway carriages where screening is required.
Construction: Standard weight, corrugated nylon (PA12), with stainless steel (316) overbraid.
Typical Applications: Moving machinery where low temperatures, abrasion and impacts occur.
FPISS FPIHSS
Construction: Standard weight, extra low fire hazard, corrugated nylon (PA6), with stainless steel (316) overbraid.
Typical Applications: Metro rail stations for anti-vandal.
Construction: Heavy weight, corrugated nylon (PA12), with stainless steel (316) overbraid.
Typical Applications: Under railway carriages where low temperatures, abrasion, impact and regular movement occurs.
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
* refer to conduit properties for applicable standards
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREENFPISS system
corrugated nylon, stainless steel overbraid
FPIHSS system corrugated nylon, stainless steel overbraid
FPRSS & FPRTC• Highly flexible and high fatigue life• High impact strength• Temperature range -40˚C to +120˚C• Extra low fire hazard• Provides EMC screening 49dB@1MHz (FPRSS) 67dB@1MHz (FPRTC)• FPRSS provides high tensile strength and resistance to abrasion, corrosion and vandals
• Vibration and shock tested to EN61373 Cat 2
FPISS & FPIHSS• Highly flexible • Exceptional fatigue life• Very high impact resistance even at low temperatures• Temperature range -50˚C to +110˚C• Low fire hazard• Provides EMC screening 49dB@1MHz• Provides high tensile strength and resistance to abrasion, corrosion and vandals
• Vibration and shock tested to EN61373 Cat 2
external thread elbow nickel plated brassMultipart 90˚ compression fitting including conduit retention clip and elastomeric seal. Can be used with knockouts. Braid is locked between inner and outer compression nuts.
C90 90°elbow sealingwashers locknuts FCC
plated steel P clip with pvc liner, stainless steel P clipsP clip to support conduit.
galvanised steel and nickel plated brass locknutsHexagonal locknut to secure fitting. EMC locknuts have raised corners to ensure good continuity.
fibre face sealing washersSealing washer to maintain IP rating of fitting to adjacent equipment.
internal and external threaded nickel plated brass elbow90˚ elbow which can be screwed onto external threaded fittings.
IP68IP67IP66IP65IP54IP40 IP69K
EMC SCREENING PERFORMANCE
FPRTC FPRSS, FPISS, FPIHSS
BM90-16MBM90-20MBM90-25MBM90-32MBM90-40MBM90-50M
FW16FW20FW25FW32FW40FW50
met
ric th
read
part
num
ber
part
num
ber
BC21-M20-C90
met
ric th
read
part
num
ber
met
ric th
read
stee
lpa
rt nu
mbe
r
met
ric th
read
bras
spa
rt nu
mbe
r
FCC16FCC20FCC25FCC32FCC40FCC50
plat
ed s
teel
part
num
ber
nom
inal
size
(mm
)
S-M16 B-M16S-M20 B-M20S-M25 B-M25S-M32 B-M32S-M40 B-M40S-M50 B-M50
162025324050
FCC16-SSFCC20-SSFCC25-SSFCC32-SSFCC40-SSFCC50-SS*
stain
less
stee
lpa
rt nu
mbe
r
met
ric th
read
EMC
part
num
ber
B-M20-EMCB-M25-EMCB-M32-EMCB-M40-EMC
properties
TECHNICAL DRAWING
41
OVERBRAID
ORDERING NOTES
FTCB Braided sleeving tinned copper braid system for EMC screening
ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
42
ww
w.fl
exic
on.u
k.co
m
• EMC Screening 67dB @ 1Mhz for 20mm
• Minimum optical cover 90%
properties
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
FTCB
Construction: Tinned copper braided sleeving. Colour: self colour
Typical Applications: Screening of cables from electromagnetic, electrostatic and RF interference. Can be sleeved over cables before they are drawn into conduits.
Construction: Nylon PA66 & Nickel Plated Brass. Colour: Black
Typical Applications: Straight fitting with internal braid clamp assembly for use with braided sleeving inside corrugated conduit.
part
num
ber
part
num
ber
Use
with
Bra
id
FP
A
FP
AX
Cond
uit S
ize (m
m)
FPA21-M20-SBCAFPA28-M25-SBCA FPA34-M32-SBCAFPA42-M40-SBCA
FPAX21-M20-SBCAFPAX28-M25-SBCA FPAX34-M32-SBCAFPAX42-M40-SBCA
FTCB10, FTCB12, FTCB15FTCB15, FTCB20, FTCB25 FTCB20, FTCB25, FTCB30FTCB25, FTCB30, FTCB35
min
Usab
le ø
mm
Usab
le ø
mm
Reel
lengt
h (m
)
max
Nom
inal
I/D(m
m)
Cros
s se
ctio
nal a
rea
-mm
2
part
num
ber
FT
CB
FTCB3 100 3.0 2.0 3.5 1.06FTCB4 100 4.0 3.0 5.0 1.49FTCB5 100 5.0 4.0 6.0 1.91FTCB6 100 6.0 5.0 7.0 2.23FTCB10 50 10.0 7.0 12.0 4.43FTCB12 50 12.5 11.0 13.0 4.83FTCB15 50 15.0 13.0 18.0 8.29FTCB20 50 20.0 17.0 23.0 9.65FTCB25 50 25.0 22.0 28.0 12.54FTCB30 25 30.0 27.0 36.0 19.30FTCB35 25 35.0 30.0 50.0 19.30FTCB50 25 50.0 45.0 65.0 35.63
Note;• As the diameter increases towards the
maximum expansion the sleeving decreases in length.
• Normally supplied on disposable PVC former or can be supplied in flat form on a reel by request
• Temperature performance:
-50°C to +300°C
FPA FPAX
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
• Available on request: - 90° and 45° elbows- PG threads
TECHNICAL DRAWING
FTCB
21283442
• Can offer mechanical support
• Can offer abrasion resistance
Cable Gland Fittings cable strain relief and enhanced IP rating for Flexicon conduitsFor applications that require the conduit system to provide strain relief and
enhanced IP rating to the cables being mechanically protected eg.
rail market or heavy machinery construction sector.
• Combined properties of conduit fitting and cable gland
• Cable strain relief
• Additional IP rating on cable inside conduit*
• Nickel plated brass fittings
• Cable gland properties: IP68 (10bar) + IP69K
• Temperature range
-40˚C to +100˚C for static applications
-20˚C to +100˚C for dynamic applications
• EMC cable gland version on request
properties
FITTINGSCONDUIT
STANDARDS
BS EN IEC 61386 43
Suita
ble
for t
he
follo
wing
co
ndui
ts
Part
Num
ber
Cond
uit
Fittin
g
IP ra
ting
of c
able
glan
d
Clam
ping
rang
e of
ca
ble
glan
d
IP ra
ting
of c
ondu
it sy
stem
Cond
uit s
ize (m
m)
202532
FSU20-M20-CG FU & SSU IP40 IP68(10bar)+IP69K 7-13mmFSU25-M25-CG 9-17mmFSU32-M32-CG 11-21mm
202532
FSU20-M20-CG FSU, FNU, LFHU and FPU IP65 IP68(10bar)+IP69K 7-13mmFSU25-M25-CG 9-17mmFSU32-M32-CG 11-21mm
202532
LTP20-M20-CG LTP, LTPHC, LTPUL, IP66+IP67+ IP68(10bar)+IP69K 7-13mmLTP25-M25-CG LTPE, LTPSS, IP68(5bar)+IP69K 9-17mmLTP32-M32-CG LTBRDP, LTBRDLFH and LTPPU 11-21mm
202532
FSB20-M20-CG FB & FUSSB IP40 IP68(10bar)+IP69K 7-13mmFSB25-M25-CG 9-17mmFSB32-M32-CG 11-21mm
202532
FSB20-M20-CG FSB & LFHUBRD IP65 IP68(10bar)+IP69K 7-13mmFSB25-M25-CG 9-17mmFSB32-M32-CG 11-21mm
202532
LTPB20-M20-CG LTPBRD IP66+IP67+ IP68(10bar)+IP69K 7-13mmLTPB25-M25-CG IP68(5bar)+IP69K 9-17mmLTPB32-M32-CG 11-21mm
202532
LPC20-M20-CG LPC IP66+IP67+ IP68(10bar)+IP69K 7-13mmLPC25-M25-CG IP68(5bar)+IP69K 9-17mmLPC32-M32-CG 11-21mm
* IP rating up to IP68(10bar), IP69K dependent on cable used
With over 21 different non metallic conduit systems to choose from we are sure to have a system to
meet your application. Systems are available in a wide variety of sizes, ranging from 10mm up to
106mm, manufactured from a range of materials offering different properties.
FM58347
®
Key Features • Wide range of sizes
• Light weight
• Easy to cut
• High fatigue life
• Superior IP ratings - up to IP69K
• Slit versions available
• Non corrosive
• Highly flexible
Key Benefits • Suitable for a wide range of applications
• Easy to work with for ease of installation
• Reduced installation times
• Reduced whole life costs
• No risk of water or dust ingress
• Suitable for retrofit applications
• Suitable for diverse environments
• Movement without any impact on performance
44
45
non-metallic
conduit & fittings
BS EN IEC 61386
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
46
ww
w.fl
exic
on.u
k.co
m
non-metallic conduit application guide
Page number
compression strength
kg/100mm21/20mm
nominal size
pull-off strength
kg21/20mm
nominal size
Colours
50
50
51
51
51
51
52
52
52&69
52
52
72
72
72
72
74
74
74
74
76&69
77
conduit system
IP66, IP67, IP68, IP69K
75 40BlackGrey
IP66, IP67, IP68, IP69K
60 30BlackGrey
IP66, IP67, IP68, IP69K
45 30 Black
IP66, IP67, IP68, IP69K
60 50 Black
IP40, IP66, IP67, IP68
60 25BlackGrey
IP40 60 15 Black
IP40, IP66, IP67, IP68
35 25Black, Grey
White
IP40, IP66, IP67, IP68
35 25 Black, Grey
IP40, IP66, IP67, IP68
100 40 Black, Grey
IP65 60 25 Black
IP65 60 25 Light Grey
IP65 60 25 Green
IP65 60 25 Blue
IP67, IP68, IP69K
120 70Black
Light Grey
IP67, IP68, IP69K
120 45 Orange
IP67, IP68, IP69K
120 60 Green
IP67, IP68, IP69K
120 60 Blue
IP40, IP66, IP67
150 30Black, Grey
White
IP40, IP65 N/A N/ABlackGrey
IP rating available
nylon LFH PA6 corrugated, std weight
nylon PA6 corrugated, light weight
nylon PA12 corrugated, standard weight
nylon PA12 corrugated, heavy weight
nylon PA6 corrugated, light weight
nylon PA6 double slit corrugated
polypropylene corrugated, std weight
polypropylene corrugated non flame retarded
polypropylene corrugated heavy weight
pvc spiral reinforced black
pvc spiral reinforced grey
smooth, pvc spiral reinforced
upvc corrugated
nylon PA6, large diameter, std weight
FPAS
FPAL
IP66, IP67, IP68, IP69K
75 40 Blacknylon extra LFH PA6 corrugated, std weightFPR
IP66, IP67, IP68, IP69K
120 70 Blacknylon LFH PA6 corrugated, heavy weightFPAH
FPI
FPIH
FPy
FPADS
FPP
FPP-NFR
FPPH
FPCB
FPCG
FPCGN
FPCBU
LPC
LPCO
LPCGN
LPCBU
FPL
FPy
For Nylon / FPP ranges: Grey RAL 7031
For FPC and LPC ranges:Light Grey RAL 7001, Blue RAL 5012Green RAL 6001, Orange RAL 2008
smooth pvc spiral blue high temperature
pvc spiral reinforced green oil resistant
pvc spiral reinforced blue high temperature
smooth pvc spiral orange ultra flexible
smooth pvc spiral green oil resistant
78 accessories 82 contractor packs 86 chemical resistance
47
high fatigue life
temperature range flexible pliable low
fire hazard halogen free self extinguishing
high abrasion
resistance
high UV resistance
non-metallic conduit and fittings
-40˚C to+120˚C
-40˚C to+120˚C
-50˚C to+110˚C
-50˚C to+110˚C
-40˚C to+100˚C
-40˚C to+110˚C
-20˚C to+90˚C
-20˚C to+90˚C
-20˚C to+90˚C
-5˚C to+70˚C
-20˚C to+70˚C
-20˚C to+70˚C
-20˚C to+90˚C
-5˚C to+70˚C
-5˚C to+70˚C
-5˚C to+70˚C
-20˚C to+90˚C
-5˚C to+70˚C
-40˚C to+120˚C
nylon LFH PA6 corrugated, std weight
nylon PA6 corrugated, light weight
nylon PA12 corrugated, standard weight
nylon PA12 corrugated, heavy weight
nylon PA6 corrugated, light weight
nylon PA6 double slit corrugated
polypropylene corrugated, std weight
polypropylene corrugated non flame retarded
polypropylene corrugated heavy weight
pvc spiral reinforced black
pvc spiral reinforced grey
smooth, pvc spiral reinforced
upvc corrugated
nylon PA6, large diameter, std weight
FPAS
FPAL
FPI
FPIH
FPy
FPADS
FPP
FPP-NFR
FPPH
FPCB
FPCG
FPCGN
FPCBU
LPC
LPCO
LPCGN
LPCBU
FPL
FPy
pvc spiral reinforced green oil resistant
pvc spiral reinforced blue high temperature
smooth pvc spiral orange ultra flexible
smooth pvc spiral blue high temperature
smooth pvc spiral green oil resistant
-40˚C to+120˚C nylon extra LFH PA6 corrugated, std weight
FPR
-40˚C to+120˚C nylon LFH PA6 corrugated, heavy weight
FPAH
90 thread data 91 technical guidance 94 low fire hazard
IP68IP67IP66IP65IP54IP40 IP69K
ww
w.fl
exic
on.u
k.co
mN
ON
-ME
TA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
48
ww
w.fl
exic
on.u
k.co
m
non-metallic selection guide
• UK manufactured products to the
highest standards
• Highest IP performance as standard
• Highest tensile strength performance
fittings - FPA and FPAX due to all
round teeth design
• Simple construction for ease of
installation - Fixed and Swivel versions
• Multiple thread variations available -
Metric, PG, NPT, UNEF, external
threads, internal threads, integral
strain relief versions
• Tested and approved to the latest
National and International Standards
• Vibration tested for secure installations
• Widest choice whatever your application
Jumbo
Accessories Stopping Plugs Clips
IP68IP67IP66IP65IP54IP40 IP69K
Flexilok™ fittings
IP68IP67IP66IP65IP54IP40 IP69K
See Pg 78 & 79
See Pg 68 See Pg 72, 73, 74 & 75 See Pg 77
Compression fittings
BS EN IEC 61386
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
Coupler Coupler - Flexible to
Rigid conduitT-pieces Reducing
DividerReducer Reducer Reducing Divider T-pieces
Straight Fittings - 10mm to 67mm Straight Fittings - 10mm to 67mm
1949
90 deg elbow - 10mm to 67mm 90 deg elbow - 10mm to 67mm
45 deg elbow - 16mm to 54mm 45 deg elbow - 16mm to 54mm
FPA FPAX
See Pg 54 & 57 See Pg 60 & 63
See Pg 54, 55, 57 & 58 See Pg 61, 63 & 64
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
Fittings with integral strain relief strain relief Fittings with integral strain relief
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
See Pg 62 & 64See Pg 55, 56 & 58
See Pg 67See Pg 56
See Pg 65See Pg 42 & 59
See Pg 66
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
50
ww
w.fl
exic
on.u
k.co
m
• Highly flexible and high fatigue life• High impact strength and recovers
if crushed• Temperature range -40˚C to +120˚C
(-20˚C to +100˚C for moving applications)
• UL recognised• Highly resistant to solvents and oils• Self extinguishing• Halogen, sulphur and phosphorus
free
Construction: Light weight nylon (PA6) corrugated flexible conduit. Colour black or grey (RAL 7031).
Typical Applications: Machines where lower mechanical protection is required and buildings.
• Highly flexible and high fatigue life• High impact strength and recovers
if crushed • Temperature range -40˚C to
+120˚C (-20˚C to +100˚C for moving applications)
• Lloyd’s Register Type Approval• UL listed / UL recognised• Low Fire Hazard (LFH), see page 94• UL 94 V2 flame retardancy• Halogen, sulphur and phosphorus
free• UV resistant (black)• Abrasion resistant• Highly resistant to solvents and oils
Construction: Standard weight, flame retardant nylon (PA6) corrugated flexible conduit. Colour black or grey (RAL 7031). Orange available on request.*
Typical Applications: All types of machinery, public buildings.
FPAS FPALSTANDARD
LOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
ORDERING NOTES
• Specify black or grey (B = Black, G = Grey)
and reel length eg: FPAS21B-50M for a Black 50m reel
• See cutting tool page 81
* Indicates parts made to order on request and may be subject to MOQ and lead time
• Available on request: - longer lengths and bulk packaging- cut lengths and assemblies- other colours- full copies of independent test results confirming LFH properties- conduit with pre-installed draw wire- fine pitch 34mm sizes
non-metallic conduit and fittings
Non-metallic systems are typically lighter,
easier to work with and more cost effective
to install. With advances in material
technologies non-metallic systems can
provide an alternative solution where
typically only metal systems had been
considered previously.
We have a range of products which can offer
properties dependant on your requirement
for impact resistance, flexibility, fatigue life,
operating temperature and fire performance
to name but a few.
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
AS
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
AL
FPAS10 50 10.0 6.3 15FPAS11 50 11.5 8.2 20FPAS13 50 13.0 9.8 25FPAS16 25, 50 15.8 11.8 35FPAS18 50 18.5 14.2 40FPAS20 50 20.0 14.8 45FPAS21 25, 50 21.2 16.7 45 FPAS25 50 25.0 19.1 50
FPAS28 25, 50 28.5 22.8 50FPAS28C* 50 28.5 21.6 50FPAS34 25, 50 34.5 28.1 60FPAS34F 25, 50 34.5 28.8 60FPAS42 10, 25 42.5 35.5 70FPAS54 10, 25 54.5 47.2 80FPAS67 10 67.2 56.3 130
FPAL10 50 10.0 6.5 15FPAL11 50 11.5 8.4 20FPAL13 50 13.0 10.0 25FPAL16 50 15.8 12.0 35FPAL18 50 18.5 14.2 35FPAL20 50 20.0 15.0 40FPAL21 50 21.2 16.9 40
FPAL25 50 25.0 19.3 45
FPAL28 50 28.5 23.0 45
FPAL34 25, 50 34.5 28.3 55
FPAL42 25 42.5 35.7 65FPAL54 25 54.5 47.4 80FPAL67 10 67.2 56.5 110
pitc
h
nom
inal
size
(mm
)
euro
pean
(NW
) size
s
7 10 F8 11 F10 13 F12 16 F14 18 F 20 C17 21 F 21 C 25 C22 25.4 F23 28 F 28 C29 34 C29 34 F36 42 C48 54 C56 67 C
F = fine pitch C = coarse pitch NOTE: Other reel lengths are available upon request
• Highly flexible• Exceptional fatigue life• High impact resistance even at very
low temperatures• UV resistant• Displays self recovery if crushed • Temperature range -50˚C to +110˚C• UL recognised• Highly resistant to solvents and oils• Self extinguishing• Low fire hazard• Halogen, sulphur and phosphorus
free
• Highly flexible and high fatigue life• High mechanical strength• High impact resistance even at very
low temperatures• UV resistant• Displays self recovery if crushed • Temperature range -50˚C to +110˚C• UL recognised• Highly resistant to solvents and oils• Self extinguishing• Low fire hazard• Halogen, sulphur and phosphorus
free
F = fine pitch C = coarse pitch
FPI FPIHSTANDARD
LOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
Construction: Heavy weight nylon (PA12) corrugated flexible conduit. Colour black.
Typical Applications: Robots and continual flexing where higher mechanical strength required.
* refer to conduit properties for applicable standards
IMPORTANT NOTE
• For LFH performance see page 94
BS EN IEC 61386
STANDARDS
FM58347
MORE
CONDUITS
OVERLEAF!
• High mechanical strength• High impact resistance • Temperature range -40˚C to +120˚C• UL recognised• Low Fire Hazard (LFH), see page 94• UL 94 V2 flame retardancy• Halogen, sulphur and phosphorus
free• UV resistant• Abrasion resistant• Highly resistant to solvents and oils
FPAHSTANDARD
LOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
Construction: Heavy weight, flame retardant, nylon (PA6) corrugated flexible conduit. Colour black.
Typical Applications: All types of machinery and public buildings where high mechanical strength required.
• Highly flexible and high fatigue life• High impact strength and recovers
if crushed • Temperature range -40˚C to +120˚C
(-20˚C to +100˚C for moving applications)
• UL recognised• Lloyd’s Register Type Approval• Extra Low Fire Hazard (LFH)• Compliant to LUL Std 1-085• UL 94 V0 flame retardancy• Halogen, sulphur and phosphorus
free• UV resistant• Abrasion resistant• Highly resistant to solvents and oils
pitc
h
nom
inal
size
(mm
)
euro
pean
(NW
) size
s
7 10 F8 11 F10 13 F12 16 F14 18 F 20 C17 21 F 21 C 25 C22 25.4 F23 28 F 28 C29 34 C29 34 F36 42 C48 54 C56 67 C
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
I
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
IH
FPI13 50 13.0 9.8 25FPI16 50 15.8 11.8 30
FPI21 50 21.2 16.7 35
FPI28 50 28.5 21.7 45FPI34 25 34.5 28.1 55
FPI42 25 42.5 35.5 60FPI54 25 54.5 47.2 70FPI67 10 67.2 56.3 120
FPIH13 50 13.0 9.0 25FPIH16 50 15.8 11.5 35
FPIH21 50 21.2 15.0 45
FPIH28 50 28.5 21.3 50FPIH34 25 34.5 26.9 60
FPIH42 25 42.5 34.6 70FPIH54 25 54.5 46.0 80
FPAH13 50 13.0 9.0 35FPAH16 50 15.8 11.5 45
FPAH21 50 21.2 15.5 55
FPAH28 50 28.5 21.3 60FPAH34 25 34.5 26.9 70
FPAH42 25 42.5 34.6 80FPAH54 25 54.5 46.0 90
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
AH
FPR10 50 10.0 6.3 15
FPR13 50 13.0 9.8 25FPR16 50 15.8 11.8 35
FPR20 50 20.0 14.8 45FPR21 50 21.2 16.7 45
FPR25 50 25.0 19.1 50
FPR28 50 28.5 21.7 50FPR34 50 34.5 28.1 60
FPR42 25 42.5 35.5 70FPR54 25 54.5 47.2 80
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
R
FPRSTANDARD
LOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
Construction: Standard weight nylon (highly flame retardant PA6) corrugated flexible conduit. Colour black.
Typical Applications: Railways, underground and public buildings.
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
Construction: Standard weight nylon (PA12) corrugated flexible conduit. Colour black.
Typical Applications: Robots and continual flexing.
52
nylon conduit clip with integral lidNylon PA66 conduit clip with integral lid for increased security. Incorporates internal ribs to prevent corrugated conduit from pulling through 20 Kg with FPAS21.
Construction: Light weight nylon (PA6) corrugated flexible conduit. Colour black or grey (RAL 7031) on request.
Typical Applications: Machines and commercial vehicles.
• Highly flexible and high fatigue life• High impact strength and recovers
if crushed • Temperature range -40˚C to +100˚C• Highly resistant to solvents and oils• Self extinguishing• Halogen, sulphur and phosphorus
free• FPY6 also available, 7.3mm OD x
5mm ID• Slit version, FPYS, also available.
Cable can be inserted laterally using tool shown on page 81.
FPy
Construction: Double slit nylon (PA6) corrugated conduit.Colour black.
Typical Applications: Retrofit.
• Made from 2 interlocking slit corrugated conduits
• Temperature range -40˚C to +120˚C
• Cables can be inserted laterally• Provides abrasion resistance and
routing of cables for static applications
• Self extinguishing• Halogen, sulphur and phosphorus
free
FPADS
ORDERING NOTES
• Specify colour (B = Black, G = Grey)
and reel length eg: FPY16B-50M for a Black 50m reel• Available on request: - longer lengths and bulk packaging- cut lengths and assemblies- additional sizes- other colours- conduit with pre-installed draw wire
- FPADS in PP
FCL
• Acid resistant• Temperature range -20˚C to +90˚C• Self extinguishing• Slit version available on request*
Other options available:
FPP
FPP-NFR
FPPH
Construction: Standard weight polypropylene, flexible conduit. Colour black, grey (RAL 7031) or white.
Typical Applications: Buildings, particularly where buried in concrete or plaster.
LSOH conduit for data calling applications
FOLD
PAGE OUT!
MORE
CONDUITS
OVERLEAF!
pitc
h
nom
inal
size
(mm
)
euro
pean
(NW
) size
s
7 10 F8 11 F10 13 F12 16 F14 18 F 20 C17 21 F 21 C 25 C22 25.4 F23 28 F 28 C29 34 C29 34 F36 42 C48 54 C56 67 C
Cond
uit C
lip
FCL10
FCL13
FCL16
FCL18
FCL20
FCL21
FCL21
FCL25
FCL25
FCL28
FCL28
FCL34
FCL34
FCL42
FCL54
F = fine pitch C = coarse pitch
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
y
FPY8 50 10.0 6.5 15FPY10 50 11.5 8.5 20FPY12 50 13.0 10.0 25FPY16 50 16.1 12.8 35
FPY20 50 21.2 16.9 40
FPY25 50 25.4 21.4 45FPY28 50 28.5 23.0 45
FPY32 25 34.5 28.3 55
FPY40 25 42.5 35.7 65FPY50 25 54.5 47.4 80
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
AD
S
FPADS11* 50 11.5 6.2 70FPADS13 50 13.0 7.9 75FPADS16 50 15.8 10.3 100
FPADS21 50 21.2 13.9 120
FPADS28 50 28.5 20.5 170FPADS34 25 34.5 26.6 180
FPADS42 25 42.5 32.0 200FPADS54 25 54.5 43.0 240
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
P
FPP10 50 10.0 6.3 15
FPP13 50 13.0 9.8 25FPP16 50 15.8 11.8 35
FPP20 50 20.0 14.8 40FPP21 50 21.2 16.7 40
FPP25 50 25.0 19.1 50FPP26 50 25.4 21.4 50FPP28 50 28.5 22.8 55
FPP34 50 34.5 28.1 65
FPP42 25 42.5 35.5 80FPP54 25 54.5 47.2 100FPP67 10 67.2 56.3 150
Heavy weight conduit for buried underground applications.
NOTE: FPP - NFR
and FPPH
Contact us for more details
Fo
ld-O
ut
Pa
ge
fo
r N
on
-Me
tall
ic c
on
du
it a
nd
fitt
ing
s G
uid
e,
Pa
ge
s 5
0,
51
& 5
2
53
ww
w.fl
exic
on.u
k.co
mTo make your selection from our wide range of flexible conduits easier, we have devised a table (see below) which offers a one page summary to help you when you come to select your fittings.
We have a wide selection of fittings that can be used with the conduits listed below.
Simply use the pull out page as a guide to see which fittings from the FPA, FPAX, Flexilok, T-pieces, MP, MPS and MSL you can use with your chosen conduit.
non-metallic conduit and fitting
nom
inal
size
(mm
)
part number
FPAS
FPAS10
FPAS11FPAS13
FPAS16
FPAS18
FPAS20FPAS21
FPAS25
FPAS28FPAS28CFPAS34FPAS34FFPAS42
FPAS54
FPAS67
part number
FPAL
FPAL10
FPAL11FPAL13
FPAL16
FPAL18
FPAL21
FPAL25
FPAL28
FPAL34
FPAL42
FPAL54
FPAL67
part number
FPI
FPI13
FPI16
FPI21
FPI28FPI34
FPI42
FPI54
FPI67
part number
FPIH
FPIH13
FPIH16
FPIH21
FPIH28FPIH34
FPIH42
FPIH54
part number
FPy
FPY8
FPY10FPY12
FPY16
FPY20
FPY25FPY28
FPY32
FPY40
FPY50
part number
FPADS
FPADS11FPADS13
FPADS16
FPADS21
FPADS28FPADS34
FPADS42
FPADS54
part number
FPP
FPP13
FPP16
FPP20FPP21
FPP25FPP26FPP28
FPP34
FPP42
FPP54
FPP67
1010111313131616161618182021212125
25.4282834344242545467
Once you have chosen your conduit from our wide range of products listed on Pages 50, 51 and 52, simply use this fold out page as a guide to see which fittings correspond with your selected conduit.
The fold out conduit summary chart below lines up with the respective susequent fittings pages to allow you to still see your selected conduit, whilst selecting your fittings.
Ordering Notes
Using this fold out page will illustrate the wide range of non metallic corrugated conduits we offer. There are nine different non metallic conduit families listed in this spread and these are detailed across Pages 50 - 52.
ORDERING NOTES
IEC EN 61386
part number
FPAH
FPAH13
FPAH16
FPAH21
FPAH28FPAH34
FPAH42
FPAH54
part number
FPR
FPR10
FPR13
FPR16
FPR20FPR21
FPR25
FPR28
FPR34
FPR42
FPR54
pitc
h
FFFFFCFCCFFCCFCCCFFCCFCCCCC
euro
pean
(NW
) size
s
778
101010121212121414
17
2223
29293636484856
OD m
m
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
straight UNEF swivel internal threadOne piece, fast fit fitting with nickel plated brass swivel UNEF internal thread for attachment to circular connectors.
FPA90FPA
90° elbow external threadOne piece, fast fit, external threaded 90 degree elbow fitting. Suitable for knockouts.
flange One piece, fast fit fitting with nylon swivel flange.
FPA
Ext Metric Ext PG Ext NPT Ext UNEF Thread Ext Flange 90 Degree Metric 90 Degree PG 90 Degree NPT
FPA10-M12 FPA10-PG7 FPA10-M12-90 FPA10-PG7-90 FPA10-M16 FPA10-PG9 FPA11-M12 FPA11-PG7 FPA11-M12-90 FPA13-M12 FPA13-PG7 FPA13-M16-90 FPA13-PG9-90 FPA13-M16 FPA13-PG9 FPA13-M20 FPA13-PG11 FPA16-M16 FPA16-PG9 FPA16-038 FPA16-BU075 (3⁄4") FPA16-FL FPA16-M16-90 FPA16-PG9-90 FPA16-050-90 FPA16-M20 FPA16-PG11 FPA16-050 FPA16-BU100 (1") FPA16-M20-90 FPA16-PG11-90 FPA16-PG13 FPA16-BU119 (13⁄16") FPA16-PG13-90 FPA16-PG16 FPA18-M20 FPA18-PG13 FPA18-M20-90 FPA18-PG13-90 FPA18-PG16 FPA18-PG16-90 FPA20-M20 FPA20-M20-90 FPA21-M20 FPA21-PG13 FPA21-050 FPA21-BU100 (1") FPA21-FL FPA21-M20-90 FPA21-PG13-90 FPA21-050-90 FPA21-PG16 FPA21-BU119 (13⁄16") FPA21-PG16-90 FPA21-BU138 (13⁄8") FPA25-M25 FPA25-M25-90 FPA28-M25 FPA28-PG21 FPA28-075 FPA28-BU144 (17⁄16") FPA28-FL FPA28-M25-90 FPA28-PG21-90 FPA28-075-90 FPA28-M32 FPA28-PG29 FPA28-BU175 (13⁄4") FPA34-M32 FPA34-PG29 FPA34-100 FPA34-BU175 (13⁄4") FPA34-FL FPA34-M32-90 FPA34-PG29-90 FPA34-100-90 FPA34-M40 FPA42-M40 FPA42-PG36 FPA42-125 FPA42-BU200 (2") FPA42-FL FPA42-M40-90 FPA42-PG36-90 FPA42-125-90 FPA42-M50 FPA42-150 FPA42-BU225 (21⁄4") FPA42-M50-90 FPA42-150-90 FPA54-M50 FPA54-PG42 FPA54-150 FPA54-BU200 (2") FPA54-M50-90 FPA54-PG48-90 FPA54-150-90 FPA54-M63 FPA54-PG48 FPA54-200 FPA54-BU225 (21⁄4") FPA54-M63-90 FPA54-200-90 FPA67-M63 FPA67-PG48 FPA67-200 FPA67-M63-90 FPA67-PG48-90 FPA67-200-90
FITTINGS
Construction: Nylon (PA66) moulded fitting.
FPA system nylon
IP68IP67IP66IP65IP54IP40 IP69KSTANDARD
LOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
ORDERING NOTES
• Specify black or grey (B = Black, G = Grey) eg. FPA16-M16B
• The IP rating onto a UNEF threaded connector may be
dependent on the design of the connector
* Indicates parts made to order on request and may be subject to MOQ and lead time
• Available on request:
- additional sizes, alternative threads
- additional UNEF threads and combinations
- all nylon UNEF threads
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
euro
pean
(NW
) size
s
778
101010121212121414
17
2223
29293636484856
straight external threadOne piece, fast fit, external threaded fitting. Suitable for knockouts or threaded entries.
FPA
IP68IP67IP66IP65IP54IP40 IP69K
90° elbow UNEF swivel internal threadOne piece, fast fit, 90 degree elbow fitting with nickel plated brass swivel UNEF internal thread for attachment to circular connectors.
OD m
m
1010111313131616161618182021212125
25.4282834344242545467
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
90 Degree UNEF Thread 90 Degree Flange 45 Degree Metric 45 Degree PG 45 Degree NPT 45 Degree UNEF Thread
FPA16-BU075-90 (3⁄4") FPA16-FL-90 FPA16-M20-45 FPA16-PG13-45 FPA16-050-45 FPA16-BU100-45 (3⁄4")
FPA16-BU100-90 (1") FPA16-BU119-45 (1")
FPA16-BU119-90 (13⁄16") FPA21-BU100-90 (1") FPA21-FL-90 FPA21-M20-45 FPA21-PG13-45 FPA21-050-45 FPA21-BU100-45 (1")
FPA21-BU119-90 (13⁄16") FPA21-PG16-45 FPA21-BU119-45 (13⁄16")
FPA21-BU138-90 (13⁄8") FPA21-BU138-45 (13⁄8")
FPA28-BU144-90 (17⁄16") FPA28-FL-90 FPA28-M25-45 FPA28-PG21-45 FPA28-075-45 FPA28-BU144-45 (17⁄16")
FPA28-BU175-90 (13⁄4") FPA28-BU175-45 (13⁄4")
FPA34-BU175-90 (13⁄4") FPA34-FL-90 FPA34-M32-45 FPA34-PG29-45 FPA34-100-45 FPA34-BU175-45 (13⁄4")
FPA42-BU200-90 (2") FPA42-FL-90 FPA42-M50-45 FPA42-PG36-45 FPA42-150-45 FPA42-BU200-45 (2")
FPA42-BU225-90 (21⁄4") FPA42-BU225-45 (21⁄4")
FPA54-BU200-90 (2") FPA54-FL-90* FPA54-M50-45 FPA54-150-45 FPA54-BU200-45 (2")
FPA54-BU225-90 (21⁄4") FPA54-BU225-45 (21⁄4")
45° elbow external threadOne piece, fast fit, external threaded 45 degree elbow fitting. Suitable for knockouts.
nom
inal
size
(mm
)
FPA45FPA90 FPA45
flangeOne piece, fast fit 90 degree elbow fitting with nylon swivel flange.
FPA90
45° elbow UNEF swivel internal threadOne piece, fast fit, 45 degree elbow fitting with nickel plated brass swivel UNEF internal thread for attachment to circular connectors.
• 1 part fast fit• IP rating: IP66• Vibration and shock tested to EN61373 Cat 2 • Tamper resistant • All round teeth give high pull off strength 70kg with FPAH21
• Can be removed using a screwdriver• Both 90˚ and 45˚ elbows incorporate swept
bore to facilitate cable installation and protect cables when installed
• Suitable for fine and coarse pitch conduits• Temperature range -50˚C to +135˚C• Metric nylon threads supplied complete
with locknuts
• Swivel UNEF threads allow assembly to military style electrical connectors without twisting of cables and includes sealing ‘O’ ring.
• Low Fire Hazard (LFH), see page 90• Halogen, sulphur and phosphorus free• Available in black or grey (RAL 7031)
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
STANDARDS
BS EN IEC 61386 55
properties
FITTINGS
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) moulded fittings.
Construction: Nylon (PA66) moulded fitting with nickel plated brass swivel thread. Colour black or grey.
FPA system nylon
FPA system brass threaded
56
couplerOne piece, fast fit, coupler to join corrugated conduits. Also available in FPAX version.
couplerOne piece, fast fit, coupler to join corrugated conduit to rigid conduit.
FPA45 FPA-FPA coupler
OD m
m
45 Degree Flange
FPA16-FL-45 FPA21-FL-45 FPA28-FL-45 FPA34-FL-45 FPA42-FL-45
FPA54-FL-45
Rigid Conduit Coupler
FPA16-MPC16 FPA21-MPC20 FPA28-MPC25 FPA34-MPC32 FPA42-MPC40
Coupler
FPA16-FPA16
FPA20-FPA20FPA21-FPA21
FPA25-FPA25
FPA28-FPA28
FPA34-FPA34
FPA54-FPA54
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
ww
w.fl
exic
on.u
k.co
m
* Indicates parts made to order on request
• NPB = Nickel Plated Brass
• Available on request:
- colour grey, other threads
- for brass locknuts and sealing washers see
accessories, page 78
- EMC braid clamp version see page 42
FPA-MPC
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
flangeOne piece, fast fit 45 degree elbow fitting with nylon swivel flange.
STANDARDS
• 1 part fast fit
• IP rating: IP66
• Vibration and shock tested to EN61373 Cat 2
• Tamper resistant
• Can be removed using a screwdriver
• All round teeth give high pull off strength 70kg with FPAH21
• Both 90˚ and 45˚ elbows incorporate swept bore to
facilitate cable installation and protect cables when installed
• Suitable for fine and coarse pitch conduits
• Temperature range -50˚C to +135˚C
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur and phosphorus free
• Available in black or grey (RAL 7031)
OD m
m
nom
inal
size
(mm
)
NPB Ext Metric
FPA13-BM16
FPA16-BM16FPA16-BM20
FPA21-BM20 FPA28-BM25 FPA34-BM32 FPA42-BM40FPA42-BM50FPA54-BM50FPA54-BM63FPA67-BM63
NPB Ext PG
FPA13-BPG9
FPA16-BPG9FPA16-BPG11
FPA21-BPG13FPA21-BPG16
FPA28-BPG21 FPA34-BPG29
NPB Int Metric
FPA13-BFM16
FPA16-BFM16FPA16-BFM20
FPA21-BFM20
FPA28-BFM25
FPA34-BFM32 FPA42-BFM40 FPA54-BFM50
NPB Int PG
FPA13-BFPG9
FPA16-BFPG11FPA16-BFPG16
FPA21-BFPG16 FPA28-BFPG21 FPA34-BFPG29
straight swivel brass internal threadOne piece, fast fit, swivel, nickel plated brass internal threaded fitting.
FPA
straight swivel brass external threadOne piece, fast fit, swivel, nickel plated brass external threaded fitting. Suitable for knockouts or threaded entries.
FPA
BS EN IEC 61386
1010111313131616161618182021212125
25.4282834344242545467
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
57
FPA90
90° elbow swivel brass external threadOne piece, fast fit, swivel, 90 degree elbow, nickel plated brass external threaded fitting. Suitable for knockouts or threaded entries.
NPB Ext Metric
FPA13-BM16-90
FPA16-BM16-90FPA16-BM20-90 FPA21-BM20-90 FPA28-BM25-90 FPA34-BM32-90 FPA42-BM50-90 FPA54-BM50-90
NPB Ext PG
FPA13-BPG9-90 FPA16-BPG9-90FPA16-BPG11-90 FPA21-BPG13-90FPA21-BPG16-90 FPA28-BPG21-90 FPA34-BPG29-90
IP68IP67IP66IP65IP54IP40 IP69K
properties
FITTINGS
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) moulded fitting with nickel plated brass swivel thread. Colour black or grey.
FPA system brass threaded
58
ww
w.fl
exic
on.u
k.co
m
* Indicates parts made to order on request
• NPB = Nickel Plated Brass
• Available on request:
- colour grey, other threads
- for brass locknuts and sealing washers
see accessories, page 78
- EMC braid clamp version, see page 42
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69K
OD m
m
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
90° elbow swivel brass internal thread One piece, fast fit, swivel, 90 degree elbow, nickel plated brass internal threaded fitting.
FPA90
NPB Int Metric
FPA13-BFM16-90
FPA16-BFM16-90FPA16-BFM20-90 FPA21-BFM20-90 FPA28-BFM25-90 FPA34-BFM32-90 FPA42-BFM50-90 FPA54-BFM50-90
NPB Int PG
FPA13-BFPG9-90
FPA16-BFPG11-90FPA16-BFPG16-90 FPA21-BFPG16-90 FPA28-BFPG21-90 FPA34-BFPG29-90
IP68IP67IP66IP65IP54IP40 IP69K
45° elbow swivel brass external thread One piece, fast fit, swivel, 45 degree elbow, nickel plated brass external threaded fitting. Suitable for knockouts or threaded entries.
FPA45 FPA45
45° elbow swivel brass internal thread One piece, fast fit, swivel, 45 degree elbow, nickel plated brass internal threaded fitting.
NPB Ext Metric
FPA16-BM16-45FPA16-BM20-45 FPA21-BM20-45 FPA28-BM25-45 FPA34-BM32-45 FPA42-BM50-45 FPA54-BM50-45
NPB Ext PG
FPA16-BPG13-45FPA16-BPG16-45 FPA21-BPG13-45FPA21-BPG16-45 FPA28-BPG21-45 FPA34-BPG29-45
NPB Int Metric
FPA16-BFM20-45 FPA21-BFM20-45 FPA28-BFM25-45 FPA34-BFM32-45 FPA42-BFM50-45 FPA54-BFM50-45
NPB Int PG
FPA16-BFPG16-45
FPA21-BFPG16-45 FPA28-BFPG21-45 FPA34-BFPG29-45
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
STANDARDS
• 1 part fast fit
• IP rating: of conduit & fitting: IP66
of cable gland: IP68 (10 bar)+IP69K
• Vibration and shock tested to EN61373 Cat 2
• Tamper resistant
• Can be removed using a screwdriver
• All round teeth give high pull off strength 70kg with FPAH21
• Both 90˚ and 45˚ elbows incorporate swept bore to facilitate
cable installation and protect cables when installed
• Suitable for fine and coarse pitch conduits
• Temperature range: conduit fitting: -50˚C to +135˚C
cable gland: -40˚C to +100˚C static
-20˚C to +100˚C dynamic
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur and phosphorus free
• Refer to accessories for clamping range page 79
OD m
m
1010111313131616161618182021212125
25.4282834344242545467
nom
inal
size
(mm
)
FPA45
NPB Metric
FPA16-BM20-CG-45
FPA21-BM20-CG-45
FPA28-BM25-CG-45
FPA34-BM32-CG-45 FPA42-BM40-CG-45 FPA54-BM50-CG-45
IP68IP67IP66IP65IP54IP40 IP69K
59
NPB Metric
FPA13-BM16-CG-90
FPA16-BM16-CG-90FPA16-BM20-CG-90 FPA21-BM20-CG-90 FPA28-BM25-CG-90 FPA34-BM32-CG-90 FPA42-BM40-CG-90 FPA54-BM50-CG-90
FPA90
IP68IP67IP66IP65IP54IP40 IP69K
cable gland One piece, fast fit, swivel, 90 degree elbow, nickel plated brass external threaded cable gland fitting. Suitable for knockouts or threaded entries.
cable gland One piece, fast fit, swivel, 45 degree elbow, nickel plated brass external threaded cable gland fitting. Suitable for knockouts or threaded entries.
NPB Metric
FPA13-BM16-CG
FPA16-BM16-CGFPA16-BM20-CG FPA21-BM20-CG FPA28-BM25-CG FPA34-BM32-CG FPA42-BM40-CG FPA54-BM50-CG*
NPB PG
FPA16-BPG11-CG*FPA16-BPG16-CG* FPA21-BPG16-CG* FPA28-BPG21-CG* FPA34-BPG29-CG*
FPA
IP68IP67IP66IP65IP54IP40 IP69K
cable glandOne piece, fast fit, swivel, nickel plated brass external threaded cable gland fitting. Suitable for knockouts or threaded entries.
BS EN IEC 61386
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
properties
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
FITTINGS
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) moulded fitting incorporating internal elastomeric seal. Colour black or grey on request*.
FPAX system nylon
60
ww
w.fl
exic
on.u
k.co
m
• Specify black or grey (B = Black, G = Grey) eg: FPAX16-M16B
• The IP rating onto a UNEF threaded connector may be
dependent on the design of the connector
• Available on request:
- additional sizes
- alternative threads
- additional UNEF threads and combinations
- all nylon UNEF threads
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FPAX
straight external thread Fast fit, external threaded fitting with additional conduit seal. Suitable for knockouts or threaded entries.
FPAX
OD m
m
nom
inal
size
(mm
)
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
Ext Metric
FPAX13-M16
FPAX16-M16FPAX16-M20 FPAX21-M20 FPAX28-M25FPAX28-M32FPAX34-M32FPAX34-M40FPAX42-M40FPAX42-M50FPAX54-M50FPAX54-M63
Ext PG
FPAX13-PG9
FPAX16-PG9FPAX16-PG11FPAX16-PG13FPAX16-PG16
FPAX21-PG13FPAX21-PG16
FPAX28-PG21FPAX28-PG29FPAX34-PG29
FPAX42-PG36
FPAX54-PG42FPAX54-PG48
Ext NPT
FPAX16-038FPAX16-050 FPAX21-050 FPAX28-075 FPAX34-100 FPAX42-125FPAX42-150FPAX54-150FPAX54-200
Flange
FPAX16-FL FPAX21-FL FPAX28-FL FPAX34-FL FPAX42-FL
Int UNEF
FPAX16-BU075FPAX16-BU100FPAX16-BU119
FPAX21-BU100FPAX21-BU119FPAX21-BU138 FPAX28-BU144FPAX28-BU175FPAX34-BU175 FPAX42-BU200FPAX42-BU225FPAX54-BU200FPAX54-BU225
straight UNEF swivel internal threadFast fit fitting with nickel plated brass swivel UNEF internal thread for attachment to circular connectors with additional conduit seal.
FPAX
Thread
(3⁄4") (1")
(13⁄16")
(1")
(13⁄16")
(13⁄8")
(17⁄16")
(13⁄4")
(13⁄4")
(2")
(21⁄4")
(2")
(21⁄4")
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
flangeFast fit fitting with nylon swivel flange with additional conduit seal.
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
1010111313131616161618182021212125
25.4282834344242545467
STANDARDS
FPAX90 FPAX90
90° elbow external threadFast fit, external threaded 90 degree elbow fitting with additional conduit seal. Suitable for knockouts.
OD m
m
1010111313131616161618182021212125
25.4282834344242545467
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
nom
inal
size
(mm
)
Ext Metric
FPAX13-M16-90
FPAX16-M16-90FPAX16-M20-90
FPAX21-M20-90 FPAX28-M25-90 FPAX34-M32-90 FPAX42-M40-90FPAX42-M50-90FPAX54-M50-90FPAX54-M63-90
Ext PG
FPAX13-PG9-90
FPAX16-PG9-90FPAX16-PG11-90FPAX16-PG13-90
FPAX21-PG13-90FPAX21-PG16-90
FPAX28-PG21-90
FPAX34-PG29-90
FPAX42-PG36-90
FPAX54-PG48-90
Ext NPT
FPAX16-050-90
FPAX21-050-90 FPAX28-075-90 FPAX34-100-90 FPAX42-125-90FPAX42-150-90FPAX54-150-90FPAX54-200-90
Flange
FPAX16-FL-90 FPAX21-FL-90 FPAX28-FL-90 FPAX34-FL-90 FPAX42-FL-90
FPAX90
Thread
(3⁄4") (1")
(13⁄16")
(1")
(13⁄16")
(13⁄8")
(17⁄16")
(13⁄4")
(13⁄4")
(2")
(21⁄4")
(2")
(21⁄4")
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
flangeFast fit 90 degree elbow fitting with nylon swivel flange with additional conduit seal.
61
90° elbow UNEF swivel internal threadFast fit, 90 degree elbow fitting with nickel plated brass swivel UNEF internal thread for attachment to circular connectors with additional conduit seal.
BS EN IEC 61386
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
properties
Int UNEF
FPAX16-BU075-90FPAX16-BU100-90FPAX16-BU119-90 FPAX21-BU100-90FPAX21-BU119-90FPAX21-BU138-90 FPAX28-BU144-90FPAX28-BU175-90FPAX34-BU175-90 FPAX42-BU200-90FPAX42-BU225-90FPAX54-BU200-90FPAX54-BU225-90
• Fast fit
• Supplied with additional conduit seal
and face seal
• Face seal details:
Nylon thread - neoprene washer
UNEF and Flange - O-ring
Brass external thread - Fibre washer
• IP rating:
IP66 + IP67 + IP68 (2 bar) + IP69K
• Vibration and shock tested to EN61373
Cat 2
• Tamper resistant
• Can be removed using a screwdriver
• All round teeth give high pull off strength
70kg with FPAH21
• Both 90˚ and 45˚ elbows incorporate
swept bore to facilitate cable installation
and protect cables when installed
• Suitable for fine and coarse
pitch conduits
• Temperature range -50˚C to +135˚C
• Metric nylon threads supplied
complete with locknuts
• Swivel UNEF threads allow assembly
to military style electrical connectors
without twisting of cables and
includes sealing ‘O’ ring
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur and phosphorus free
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) moulded fitting with swivel metal thread. External and internal metallic threads are made from nickel plated brass and incorporate an internal elastomeric seal. Colour black, grey on request*.
FPAX system nylon & brass threaded
62
ww
w.fl
exic
on.u
k.co
m
• Specify black or grey (B=Black, G=Grey)
eg: FPAX16-M20-45B
• NPB = Nickel Plated Brass
• Available on request:
- colour grey, other threads
- for brass locknuts and sealing washers see
accessories, page 78
- EMC braid clamp version
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
FPAX45 FPAX45FPAX45
OD m
m
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
Ext Metric
FPAX16-M20-45 FPAX21-M20-45 FPAX28-M25-45 FPAX34-M32-45 FPAX42-M50-45 FPAX54-M50-45
Ext PG
FPAX16-PG13-45
FPAX21-PG13-45FPAX21-PG16-45
FPAX28-PG21-45
FPAX34-PG29-45
FPAX42-PG36-45
Ext NPT
FPAX16-050-45 FPAX21-050-45 FPAX28-075-45 FPAX34-100-45 FPAX42-150-45 FPAX54-150-45
Flange
FPAX16-FL-45 FPAX21-FL-45 FPAX28-FL-45 FPAX34-FL-45 FPAX42-FL-45
Int UNEF
FPAX16-BU100-45FPAX16-BU119-45 FPAX21-BU100-45FPAX21-BU119-45FPAX21-BU138-45 FPAX28-BU144-45FPAX28-BU175-45FPAX34-BU175-45
FPAX42-BU200-45FPAX42-BU225-45FPAX54-BU200-45FPAX54-BU225-45
45° elbow external threadFast fit, external threaded 45 degree elbow fitting with additional conduit seal. Suitable for knockouts.
45° elbow UNEF swivel internal threadFast fit, 45 degree elbow fitting with nickel plated brass swivel UNEF internal thread for attachment to circular connectors with additional conduit seal.
Thread
(1") (13⁄16")
(1")
(13⁄16")
(13⁄8")
(17⁄16")
(13⁄4")
(13⁄4")
(2")
(21⁄4")
(2")
(21⁄4")
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
flangeFast fit 45 degree elbow fitting with nylon swivel flange with additional conduit seal.
FITTINGS
Construction: Nylon (PA66) moulded fitting incorporating internal elastomeric seal.
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
STANDARDS
• Fast fit
• Supplied with additional conduit seal and face seal
• Face seal details:
Nylon thread - neoprene washer
UNEF and Flange - O-ring
Brass threads - Fibre washer
• IP rating: IP66 + IP67 + IP68 (2 bar) + IP69K
• Vibration and shock tested to EN61373
Cat 2
• Tamper resistant
• Can be removed using a screwdriver
• All round teeth give high pull off strength
70kg with FPAH21
• Both 90˚ and 45˚ elbows incorporate swept bore
to facilitate cable installation and protect cables
when installed
• Suitable for fine and coarse pitch conduits
• Temperature range -50˚C to +135˚C
• Metric nylon threads supplied complete with
locknuts
• Swivel UNEF threads allow assembly to
military style electrical connectors without
twisting of cables and includes sealing ‘O’ ring
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur and phosphorus free
straight swivel brass internal threadFast fit, swivel, nickel plated brass internal threaded fitting with additional conduit seal.
FPAX
straight swivel brass external thread Fast fit, swivel, nickel plated brass external threaded fitting with additional conduit seal. Suitable for knockouts or threaded entries.
FPAX
OD m
m
1010111313131616161618182021212125
25.4282834344242545467
nom
inal
size
(mm
)
NPB Ext Metric
FPAX13-BM16
FPAX16-BM16FPAX16-BM20
FPAX21-BM20
FPAX28-BM25
FPAX34-BM32
FPAX42-BM40FPAX42-BM50FPAX54-BM50FPAX54-BM63
NPB Ext PG
FPAX13-BPG9 FPAX16-BPG9FPAX16-BPG11 FPAX21-BPG13FPAX21-BPG16 FPAX28-BPG21 FPAX34-BPG29
NPB Int Metric
FPAX13-BFM16
FPAX16-BFM16FPAX16-BFM20 FPAX21-BFM20 FPAX28-BFM25 FPAX34-BFM32 FPAX42-BFM40 FPAX54-BFM50
NPB Int PG
FPAX13-BFPG9
FPAX16-BFPG11FPAX16-BFPG16 FPAX21-BFPG16 FPAX28-BFPG21 FPAX34-BFPG29
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
63
FPAX90
90° elbow swivel brass external threadFast fit, swivel, 90 degree elbow, nickel plated brass external threaded fitting with additional conduit seal. Suitable for knockouts or threaded entries.
NPB Ext Metric
FPAX13-BM16-90
FPAX16-BM16-90FPAX16-BM20-90 FPAX21-BM20-90 FPAX28-BM25-90 FPAX34-BM32-90 FPAX42-BM50-90 FPAX54-BM50-90
NPB Ext PG
FPAX13-BPG9-90 FPAX16-BPG9-90FPAX16-BPG11-90 FPAX21-BPG13-90FPAX21-BPG16-90 FPAX28-BPG21-90 FPAX34-BPG29-90
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
BS EN IEC 61386
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
properties
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) moulded fitting with swivel metal thread. External and internal metallic threads are made from nickel plated brass and incorporate an internal elastomeric seal. Colour black, grey on request*.
FPAX system brass threaded
64
ww
w.fl
exic
on.u
k.co
m
• NPB = Nickel Plated Brass
* Indicates parts made to order on request
• Available on request:
- colour grey, other threads
- for brass locknuts and sealing washers see
accessories, page 78
- EMC braid clamp version, see page 42
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
90° elbow swivel brass internal threadFast fit, swivel, 90 degree elbow, nickel plated brass internal threaded fitting with additional conduit seal.
FPAX90
NPB Int Metric
FPAX13-BFM16-90
FPAX16-BFM16-90FPAX16-BFM20-90 FPAX21-BFM20-90 FPAX28-BFM25-90 FPAX34-BFM32-90 FPAX42-BFM50-90 FPAX54-BFM50-90
NPB Int PG
FPAX13-BFPG9-90
FPAX16-BFPG11-90FPAX16-BFPG16-90 FPAX21-BFPG16-90 FPAX28-BFPG21-90 FPAX34-BFPG29-90
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
45° elbow swivel brass external threadFast fit, swivel, 45 degree elbow, nickel plated brass external threaded fitting with additional conduit seal. Suitable for knockouts or threaded entries.
FPAX45
NPB Ext Metric
FPAX16-BM16-45FPAX16-BM20-45 FPAX21-BM20-45 FPAX28-BM25-45 FPAX34-BM32-45 FPAX42-BM50-45 FPAX54-BM50-45
NPB Ext PG
FPAX16-BPG13-45FPAX16-BPG16-45 FPAX21-BPG13-45FPAX21-BPG16-45 FPAX28-BPG21-45 FPAX34-BPG29-45
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
45° elbow swivel brass internal thread Fast fit, swivel, 45 degree elbow, nickel plated brass internal threaded fitting with additional conduit seal.
FPAX45
NPB Int Metric
FPAX16-BFM20-45 FPAX21-BFM20-45 FPAX28-BFM25-45 FPAX34-BFM32-45 FPAX42-BFM50-45 FPAX54-BFM50-45
NPB Int PG
FPAX16-BFPG16-45
FPAX21-BFPG16-45 FPAX28-BFPG21-45 FPAX34-BFPG29-45
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FITTINGS
OD m
m
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
STANDARDS TECHNICAL DRAWING
• Fast fit
• Supplied with additional conduit seal & face seal
• Face seal details:
Nylon thread - neoprene washer
UNEF and Flange - O-ring
Brass threads - Fibre washer
• IP rating: for conduit & fitting IP66 + IP67 +
IP68 (2 bar) + IP69K
for cable gland: IP68 (10 bar)+IP69K
• Vibration and shock tested to EN61373 Cat 2
• Tamper resistant
• Both 90˚ and 45˚ elbows incorporate swept
bore to facilitate cable installation and protect
cables when installed
• Can be removed using a screwdriver
• All round teeth give high pull off strength
70kg with FPAH21
• Both 90˚ and 45˚ elbows incorporate swept
bore to facilitate cable installation and protect
cables when installed
• Suitable for fine and coarse pitch conduits
• Temperature range:
conduit fitting: -50˚C to +135˚C
cable gland: -40˚C to +100˚C static
-20˚C to +100˚C dynamic
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur and phosphorus free
• Refer to accessories for clamping range
page 79
FPAX45
NPB Metric
FPAX16-BM20-CG-45
FPAX21-BM20-CG-45 FPAX28-BM25-CG-45 FPAX34-BM32-CG-45 FPAX42-BM40-CG-45 FPAX54-BM50-CG-45*
NPB Metric
FPAX13-BM16-CG-90
FPAX16-BM16-CG-90FPAX16-BM20-CG-90 FPAX21-BM20-CG-90 FPAX28-BM25-CG-90 FPAX34-BM32-CG-90 FPAX42-BM40-CG-90 FPAX54-BM50-CG-90*
FPAX90
cable glandFast fit, swivel, 90 degree elbow, nickel plated brass external threaded cable gland fitting with additional conduit seal. Suitable for knockouts or threaded entries.
cable glandFast fit, swivel, 45 degree elbow, nickel plated brass external threaded cable gland fitting with additional conduit seal. Suitable for knockouts or threaded entries.
65
NPB Metric
FPAX13-BM16-CG
FPAX16-BM16-CGFPAX16-BM20-CG FPAX21-BM20-CG FPAX28-BM25-CG FPAX34-BM32-CG FPAX42-BM40-CG FPAX54-BM50-CG*
NPB PG
FPAX16-BPG11-CG*FPAX16-BPG16-CG* FPAX21-BPG16-CG* FPAX28-BPG21-CG* FPAX34-BPG29-CG*
FPAX
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
cable glandFast fit, swivel, nickel plated brass external threaded cable gland fitting with additional conduit seal. Suitable for knockouts or threaded entries.
BS EN IEC 61386
properties
OD m
m
1010111313131616161618182021212125
25.4282834344242545467
nom
inal
size
(mm
)
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FITTINGS
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) moulded fitting. FPA colour black or grey as standard. FPAX incorporate internal elastomeric seal(s). Colour black or grey on request.
FPA & FPAX T Pieces and Dividers
66
ww
w.fl
exic
on.u
k.co
m
* Indicates parts made to order on request and may be
subject to MOQ and lead time
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FPA
FPA16T
FPA20T
FPA21T
FPA28T
FPA34T
FPA42T
T piece with inspection lid Fast fit T piece with inspection lid.
IP68IP67IP66IP65IP54IP40 IP69K
16
21
28
34
13
16
21
28
Cond
uit I
n (m
m)
Cond
uit O
ut x
2 fo
r divi
der
euro
pean
(NW
) size
s
12
17
23
29
36
Reducer/ Stop Plug
FPA13-R16SP-R16
FPA16-R21FPA13-R21
SP-R21
FPA25-R28FPA21-R28FPA20-R28FPA16-R28FPA13-R28
SP-R28
FPA28-R34FPA21-R34FPA16-R34
SP-R34FPA34-R42FPA28-R42FPA21-R42
Fitting to reduce or blank off any outlets.
IP68IP67IP66IP65IP54IP40 IP69K
FPA
FPA16-13-13
FPA21-16-16
FPA28-21-21
FPA34-28-28
DividerFast fit reducing divider
IP68IP67IP66IP65IP54IP40 IP69K
R
SP
• Available on request:
- other colours Conduit Size
T-piece or Reducer Size
How to read the fittings code
FPAX21-R28
STANDARDS
• Fast fit
• IP rating: FPA IP66
FPAX IP66 + IP67 + IP68 (2 bar)
• Maintains all the benefits of FPA and FPAX fittings
• Vibration and shock tested to EN61373 Cat 2
• Tamper resistant
• All round teeth give high pull off strength
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur & phosphorous free
• Inspection lid facilitates pull through of cables easing
installation on the T-piece
• Rounded internal corners protect cable insulation during
installation and use
• Incorporates mounting lugs to aid secure fixing
67
16
21
28
34
42
13
16
21
28
Cond
uit I
n
Cond
uit O
ut x
2 fo
r divi
der
euro
pean
(NW
) size
s
12
17
23
29
36
BS EN IEC 61386
properties
FPAX16-13-13
FPAX21-16-16
FPAX28-21-21
FPAX34-28-28
FPAX
DividerFast fit reducing divider with additional seals for enhanced IP ratings
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FPAX
T piece with inspection lidFast fit T piece with inspection lid and additional seals for enhanced IP rating.
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FPAX16T
FPAX21T
FPAX28T
FPAX34T
FPAX42T
Reducer/ Stop Plug
Fitting to reduce or blank off outlets with additional seal for enhanced IP rating.
FPAX13-R16
FPAX16-R21SP-R21
FPAX21-R28FPAX16-R28
SP-R28
FPAX28-R34FPAX21-R34FPAX16-R34
FPAX34-R42FPAX28-R42FPAX21-R42
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
R
SP
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon (PA66) or polypropylene moulded fitting.
Flexilok® system
68
ww
w.fl
exic
on.u
k.co
m
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69K
• One piece fast fit
• Slim design
• IP rating: IP66
• Anti-vibration and tamper resistant
• Pull off strength with:
(FLK21 - FPAS21 25kg)
(FLK21 - FPAL21 20kg)
(FLK20-PP - FPP20 13kg)
• Can be removed using a screwdriver
• Suitable for fine and coarse pitch conduits
• Temperature range -50˚C to +135˚C
• Metric threads supplied complete with locknuts
• Low Fire Hazard (LFH), see page 94
• Halogen, sulphur and phosphorus free
• Available in black, grey (RAL 7031) and white,
see page 69
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
OD m
m
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
Ext Metric
FLK10-M12*
FLK13-M16
FLK16-M16FLK16-M20
FLK20-M20FLK21-M20
FLK25-M25
FLK28-M25
FLK34-M32
FLK42-M40*
FLK54-M50*
Ext Metric (PP)
FLK16-M16-PP
FLK20-M20-PP
FLK25-M25-PP
FLK34-M32-PP
Ext PG
FLK13-PG9
FLK16-PG11FLK16-PG13
FLK21-PG16
FLK28-PG21
FLK34-PG29
FLK
straight external threadOne piece, slim, fast fit, external threaded fitting suitable for knockouts or threaded entries.
IP68IP67IP66IP65IP54IP40 IP69K
FITTINGS
ORDERING NOTES ALSO AVAILABLE SPECIALS
• Specify black or grey (B=Black, G=Grey) eg. FLK20-M20B
• For white version see page 69
* Coming soon
• Push in fitting removal tool -
see accessories page 75
• Brass threaded versions
Coupler
FLK16-FLK16
FLK20-FLK20FLK21-FLK21
FLK25-FLK25
FLK28-FLK28
FLK34-FLK34
FLK-FLK
coupler One piece, slim, fast fit coupler for joining 2 conduits together.
IP68IP67IP66IP65IP54IP40 IP69K
Ext Metric
FLK16-M16-90FLK16-M20-90
FLK20-M20-90FLK21-M20-90
FLK25-M25-90
FLK28-M25-90
FLK34-M32-90
Ext PG
FLK16-PG11-90
FLK21-PG16-90
FLK28-PG21-90
FLK34-PG29-90
FLK90
90° elbow external thread One piece, slim, fast fit, external threaded 90 degree elbow fitting suitable for knockouts.
IP68IP67IP66IP65IP54IP40 IP69K
FLK16-PL20
FLK20-PL20FLK21-PL20
FLK25-PL25
FLK28-PL25
FLK34-PL32
FLK
IP68IP67IP66IP65IP54IP40 IP69K
Push inSimple, one piece, push in fitting suitable for knockouts with no need for locknuts.
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
Construction: Polypropylene or upvc conduit system with nylon straight, 90° elbow, coupler and conduit clips options.
White Products
FITTINGSCONDUIT
69
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
For details see page 52
FPP
straight external threadOne piece, slim, fast fit, external threaded fitting suitable for knockouts or threaded entries.
FLK
90° elbow external thread One piece, slim, fast fit, external threaded 90 degree elbow fitting suitable for knockouts.
FLK90
coupler One piece, slim, fast fit coupler for joining 2 conduits together.
FLK-FLK
nylon conduit clip with integral lidNylon PA66 conduit clip with integral lid for increased security. Incorporates internal ribs to prevent conduit from pulling through.
FCL
nylon conduit clip with integral lidNylon PA66 conduit clip with integral lid for increased security and plain ID for rigid conduit.
FCL-P
STANDARDS
FPL-CP20W M20 thread
FPL-CP25W M25 thread
• 10m of FPL white conduit
• 10 x Flexilok® fittings
• 10 x Locknuts
PVC - Contractor packwhite
Thread White Thread Cable Dia Cable Dia Spanner PackNo. Part No. Length (mm) (min) (mm) (max) (mm) Size (mm) Quantity
M16 CGM16W 11 5 10 22 100M20 CGM20SW 11 6 12 24 100M20 CGM20W 11 10 14 27 100M25 CGM25W 11 13 18 33 50supplied with locknut
For other colours see page 79
Cable Glandswhite
IP68IP67IP66IP65IP54IP40 IP69K
For details see page 76
FPL
OD m
m
nom
inal
size
(mm
)
202534
20.025.034.5
FPP20W-50MFPP25W-50MFPP34W-50M
FPL20W-100MFPL25W-50M
Ext Metric
FLK20-M20WFLK25-M25WFLK34-M32W
FLK20-FLK20WFLK25-FLK25W
Ext Metric
FLK20-M20-90WFLK25-M25-90W
FCL20WFCL25W
FCL20W-PFCL25W-P
50m
coi
l
FP
P
50m
& 1
00m
coi
l
FP
L
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
S
Construction: Nylon compression fittings. Colour - black, grey on request*.
MP fitting with nylon retaining clip provides a pull off strength of 20kg with FPAS21 and IP40.
MPS fitting with a neoprene sealing ring provides a pull off strength of 15kg with FPAS21 and IP67.
MP, MP90 & T system
70
ww
w.fl
exic
on.u
k.co
m
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
FITTINGS
ORDERING NOTES
• Metric threads supplied complete with locknuts
• Available on request:
- reduced outlet T pieces
- other colours
- PG threads
nom
inal
size
(mm
)
1010111313131616161618182021212125
25.4282834344242545467
OD m
m
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
Ext Metric
MP90-16-M16MP90-16-M20 MP90-16-M16 MP90-20-M20MP90-20-M20 MP90-25-M25MP90-25-M25MP90-28-M25 MP90-32-M32 MP90-40-M40 MP90-50-M50
Ext Metric
MPS90-16-M16MPS90-16-M20 MPS90-16-M16 MPS90-20-M20MPS90-20-M20 MPS90-25-M25MPS90-25-M25MPS90-28-M25 MPS90-32-M32 MPS90-40-M40 MPS90-50-M50
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
90° elbow external thread90° elbow nylon compression fitting external thread including locknut.
MP90
90° elbow external thread90° elbow nylon compression fitting, with seal, external thread including locknut.
MPS90
T Piece
T12X12X12 T16X16X16 T16X16X16 T20X20X20T20X20X20 T25X25X25T25X25X25
T Piece
TS12X12X12 TS16X16X16 TS16X16X16 TS20X20X20TS20X20X20 TS25X25X25TS25X25X25
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
T Piece fittingT piece nylon compression fitting.
T
T Piece fitting with sealsT piece nylon compression fitting, with seals.
TS
Ext Metric
MP-12-M16
MP-16-M16MP-16-M20 MP-16-M16 MP-20-M20MP-20-M20 MP-25-M25MP-25-M25MP-28-M25 MP-32-M32 MP-40-M40 MP-50-M50
Ext Metric
MPS-12-M16
MPS-16-M16MPS-16-M20 MPS-16-M16 MPS-20-M20MPS-20-M20 MPS-25-M25MPS-25-M25MPS-28-M25 MPS-32-M32 MPS-40-M40 MPS-50-M50
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
straight external threadstraight nylon compression fitting external thread including locknut.
MP
straight external threadStraight nylon compression fitting, with seal, external thread including locknut.
MPS
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
IP40 T shown
MSL moulded in nylon or PP hinged fitting black and grey RAL7031. Pull off strength 10kg with FPP21.
MPC nylon compression fitting black. Pull off strength 15kg with FPY20.
MSL & MPC system
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
OD m
m
10.0
11.513.0
15.8
16.118.5
20.021.2
25.025.428.5
34.5
42.5
54.5
67.0
1010111313131616161618182021212125
25.4282834344242545467
nom
inal
size
(mm
)
Ext Metric (PP)
MSL-21-M20-PP MSL-26-M25-PP
Ext Metric (Nylon)
MSL-21-M20 MSL-26-M25
End Cap
EC16B EC21B EC28B EC34B EC42B EC54B
Conduit Clip
FCL10 FCL13
FCL16 FCL16FCL18 FCL20FCL21 FCL25FCL25FCL28 FCL34 FCL42 FCL54
Ext Metric
MPC-12-M16
MPC-16-M16
MPC-20-M20
MPC-25-M25
MPC-32-M32
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
STANDARDS
straight hinged fitting external threadNylon and PP hinged, snap on fittings including locknuts.
MSL
straight nylon external threadNylon compression fitting, external thread including locknut.
MPC
end capNylon PA66 end cap to snap over end of conduit and provide a smooth entry bush.
EC
nylon conduit clip with integral lidNylon PA66 conduit clip with integral lid for increased security. Incorporates internal ribs to prevent conduit from pulling through.
FCL
71
BS EN IEC 61386
euro
pean
(NW
) size
s
778
101010121212121414
171717
22232329293636484856
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
SFPCB system spiral reinforced pvcFPCG, FPCGN & FPCBU system spiral reinforced pvc with special properties
72
ww
w.fl
exic
on.u
k.co
m
• Add reel length eg: FPC20B-30M for 30M
* Indicates parts made to order on request and
may be subject to MOQ and lead time
• For UL recognised black conduit order FPCURB*
• Available on request:
additional sizes
alternative threads
other colours
straight nylon compression fitting external thread2 part compression fitting with internal spigot and all round external teeth to grip conduit. Available in black or grey (RAL 7001).
MPCFPCB
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
Blue
(RAL
501
2)
Gree
n (R
AL 6
001)
Grey
(RAL
700
1)
FP
C
nom
inal
size
(mm
)
MPC-12-M16MPC-16-M16MPC-16-M20MPC-20-M20MPC-25-M25MPC-30-M30*MPC-32-M32MPC-40-M40MPC-50-M50MPC-63-M63
met
ric th
read
part
num
ber
MPC-12-PG9MPC-16-PG11MPC-16-PG13MPC-20-PG16MPC-25-PG21MPC-30-PG29*MPC-32-PG29MPC-40-PG36MPC-50-PG42MPC-63-PG48
PG th
read
part
num
ber
12161620253032405063
FPC12B FPC12G* FPC12GN* FPC12BU* 30 14.5 10.0 25FPC16B FPC16G* FPC16GN* FPC16BU* 30 16.5 12.0 25
FPC20B FPC20G* FPC20GN* FPC20BU* 30 21.0 16.0 35FPC25B FPC25G* FPC25GN* FPC25BU* 30 27.5 22.0 45FPC30B* FPC30G* 30 30.5 25.0 55FPC32B FPC32G* FPC32GN* FPC32BU* 10,30 33.5 28.0 60FPC40B FPC40G* FPC40GN* FPC40BU* 10,30 41.0 35.0 80FPC50B FPC50G* FPC50GN* FPC50BU* 10,30 46.4 40.0 105FPC63B FPC63G* FPC63GN* FPC63BU* 10,30 57.0 50.0 120
Blac
k
Construction: Smooth bore, helically formed pvc, flexible conduit with spiral upvc reinforcement and flexible pvc jacket. Colour green
Typical Applications: As FPCB but where oil resistance is required.
Construction: As FPCB except colour grey.
Typical Applications: As FPCB
FPCGN
FPCG
Construction: As FPCB except colour blue.
Typical Applications: As FPCB but where high temperature is required.
FPCBU
Construction: Smooth bore, helically formed pvc, flexible conduit with spiral upvc reinforcement and flexible pvc jacket. Colour black.
Typical Applications: Routing of cables within machines.
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
FITTINGSCONDUIT
ALTERNATIVES
STANDARDS TECHNICAL DRAWING
• Highly flexible
• Accepts torsional movement
• Vibration and shock tested to EN61373 Cat 2
• IP rating: IP65
• Temperature range -5˚C to +70˚C (FPCB - black)
-20˚C to +70˚C (FPCG - grey)
-20˚C to +70˚C (FPCGN - green)
-20˚C to +90˚C (FPCBU - blue)
• FPCB (black) is UV resistant
• FPCGN (green) is oil resistant
• Self extinguishing
• Metric threads supplied complete with locknuts
• UL recognised to UL1696 for use in US and Canada
MPC90 MPC45
90° elbow nylon compression fitting external thread2 part compression, 90 degree elbow fitting with internal spigot and all round external teeth to grip conduit. Available in black or grey (RAL 7001).
45° elbow nylon compression fitting external thread2 part compression, 45 degree elbow fitting with internal spigot and all round external teeth to grip conduit. Available in black or grey (RAL 7001).
MPC90-16-M16MPC90-16-M20MPC90-20-M20MPC90-25-M25
MPC90-32-M32MPC90-40-M40
met
ric th
read
part
num
ber
MPC45-16-M20
MPC45-20-M20MPC45-25-M25MPC45-32-M32
met
ric th
read
part
num
ber
MPC90-16-PG11MPC90-16-PG13MPC90-20-PG16MPC90-25-PG21
MPC90-32-PG29MPC90-40-PG36
PG th
read
part
num
ber
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
73
BS EN IEC 61386
properties
* refer to conduit properties for applicable standards
ORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
SLPC system smooth spiral reinforced pvc
74
ww
w.fl
exic
on.u
k.co
m
* Indicates parts made to order on request and
may be subject to MOQ and lead time
• Available on request:
- additional sizes
- alternative threads
- alternative materials (eg. PU)
- other colours
- conduit couplers
- 45 degree brass elbow
- combined conduit fitting with
cable gland, see page 43
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd ra
dius
(m
m)
part
num
ber
reel
lengt
h (m
)
LP
C
nom
inal
size
(mm
)
121616202532405063
met
ric th
read
part
num
ber
PG th
read
part
num
ber
NPT
thre
adpa
rt nu
mbe
r
met
ric th
read
part
num
ber
PG th
read
part
num
ber
Construction: Smooth bore, smooth cover, helically formed pvc, flexible conduit with spiral upvc reinforcement and flexible pvc jacket. Colour black, or grey.
Typical Applications: Food processing machines and wash-down installations.
straight nylon compression fitting external thread including locknut2 part compression fitting with internal spigot and all round external teeth to grip conduit. Available in black or grey (RAL 7001).
MPC
90° elbow nylon compression fitting external thread2 part compression, 90 degree elbow fitting with internal spigot and all round external teeth to grip conduit. Available in black or grey (RAL 7001).
MPC90
LPC12B LPC12G* LPC12O* LPC12GN* LPC12BU* 30 14.2 10.0 50LPC16B LPC16G LPC16O LPC16GN* LPC16BU* 30 17.8 12.6 50
LPC20B LPC20G LPC20O LPC20GN* LPC20BU* 10,30 21.1 16.0 70LPC25B LPC25G LPC25O LPC25GN* LPC25BU* 10,30 26.4 21.0 90LPC32B LPC32G LPC32O LPC32GN* LPC32BU* 10,30 33.1 26.5 140LPC40B LPC40G* LPC40O* LPC40GN* LPC40BU* 10,30 41.8 35.4 190LPC50B LPC50G* LPC50O* LPC50GN* LPC50BU* 10,30 47.9 40.0 240LPC63B LPC63G* LPC63O* LPC63GN* LPC63BU* 10,30 59.7 51.3 270
MPC-16-M16MPC-16-M20MPC-20-M20MPC-25-M25MPC-32-M32MPC-40-M40MPC-50-M50MPC-63-M63
MPC-16-050
MPC-20-050MPC-25-075MPC-32-100MPC-40-125
MPC90-16-PG11MPC90-16-PG13MPC90-20-PG16MPC90-25-PG21MPC90-32-PG29MPC90-40-PG36
MPC-16-PG11MPC-16-PG13MPC-20-PG16MPC-25-PG21MPC-32-PG29MPC-40-PG36MPC-50-PG42MPC-63-PG48
MPC90-16-M16MPC90-16-M20MPC90-20-M20MPC90-25-M25MPC90-32-M32MPC90-40-M40
LPC
Construction: As LPC except colour orange.
Typical Applications: As LPC but where high flexibility is required.
LPCO
Construction: As LPC except colour green.
Typical Applications: As LPC but where oil resistance is required.
LPCGN
Construction: As LPC except colour blue.
Typical Applications: As LPC but where high temperature is required.
LPCBU
Blue
(RAL
501
2)
Gree
n (R
AL 6
001)
Grey
(RAL
700
1)
Oran
ge (R
AL 2
008)
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
CONDUIT FITTINGS
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KLPCO, LPCGN& LPCBU system smooth spiral reinforced pvcwith special properties
ALTERNATIVES
STANDARDS
• Smooth, wipe clean surface
• Accepts some torsional movement
• IP rating: IP67 with MPC fittings
IP66, IP67, IP68 (2 bar) + IP69K with metal
C-type compression fittings
• Temperature range -5˚C to +70˚C
• LPCBU (blue) temperature range -20˚C to +90˚C
• LPCO (orange) is highly flexible
• LPCGN (green) is oil resistant
• LPCB (black) is UV resistant
• Self extinguishing
• Metric nylon fittings supplied complete with locknut
• Vibration and shock tested to EN 61373 Cat 2
met
ric th
read
part
num
ber
MPC45
met
ric th
read
part
num
ber
PG th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
C CSSC90C-S C90-SS
nom
inal
size
(mm
)
121616202532405063
LPC16-PG11-CLPC16-PG13-CLPC20-PG16-CLPC25-PG21-CLPC32-PG29-C
LPC12-M16-CLPC16-M16-CLPC16-M20-CLPC20-M20-CLPC25-M25-CLPC32-M32-CLPC40-M40-CLPC50-M50-CLPC63-M63-C
LPC16-M16-SLPC16-M20-SLPC20-M20-SLPC25-M25-SLPC32-M32-S
LPC12-M16-C90LPC16-M16-C90LPC16-M20-C90LPC20-M20-C90LPC25-M25-C90LPC32-M32-C90LPC40-M40-C90LPC50-M50-C90LPC63-M63-C90
LPC16-M16-CSSLPC16-M20-CSSLPC20-M20-CSSLPC25-M25-CSSLPC32-M32-CSS
LPC16-M20-CSS90
LPC20-M20-CSS90LPC25-M25-CSS90LPC32-M32-CSS90
MPC45-16-M20
MPC45-20-M20MPC45-25-M25MPC45-32-M32
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
swivel external thread NPBCompression fitting for knockout or threaded entries.
Multipart compression fitting including elastomeric seal. The external thread swivels about the main body even after tightening.
external thread NPBMultipart compression fitting including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
external thread stainless steelMultipart compression fitting including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
external metric thread nickel plated brassMultipart compression fitting including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
45° elbow nylon fitting external thread2 part compression, 45 degree elbow fitting with internal spigot and all round external teeth to grip conduit. Available in black or grey (RAL 7001).
external thread stainless steelMultipart compression fitting including nylon seal. Can be used for knockout or threaded entries as fitting rotates until tightened.
BS EN IEC 61386
properties
TECHNICAL DRAWING
75
FITTINGS
STANDARDSORDERING NOTES
NO
N-M
ETA
LLIC
CO
ND
UIT
& F
ITTI
NG
SFPL system upvc corrugated pliable conduit
76
ww
w.fl
exic
on.u
k.co
m
• Specify black or grey (B = Black, G = Grey)
• FPL can be used with FPA fittings
• Available on request:
- longer lengths and bulk packaging
- cut lengths and assemblies, additional sizes
- alternative threads, other colours
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
L
nom
inal
size
(mm
)
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
FPL16 100 16.0 12.0 25
FPL20 100 20.0 15.0 30FPL25 50 25.0 19.5 40FPL32 25 34.5 27.9 50
1616202534
MP-16-M16MP-16-M20MP-20-M20MP-25-M25MP-32-M32
met
ric th
read
part
num
ber
FLK16-M16FLK16-M20FLK20-M20FLK25-M25FLK34-M32
MPS-16-M16MPS-16-M20MPS-20-M20MPS-25-M25MPS-32-M32
Construction: Standard weight, upvc, corrugated pliable conduit. Colour black, grey (RAL 7045) or white. (see page 63)
Typical Applications: Static connections in buildings.
• High compression strength
• Bends to a small radius
• IP rating:
IP40 with MP and T fittings
IP66 with FLK fittings
IP67 with MPS fittings
• Temperature range
-5˚C to +70˚C
• Self extinguishing
• UV resistant (black)
• Tensile strength:
FLK 25kg
MP 20kg
MPS 15kg
FPL MP
straight external threadStraight nylon compression fittingexternal thread including locknut.
straight external threadStraight nylon compression fitting with seal external thread including locknut.
FLK MPS
MP shown
met
ric th
read
part
num
ber
90° elbow external threadOne piece, slim, fast fit, nylon external threaded 90 degree elbow fitting suitable for knockouts.
FLK90
FLK16-M16-90FLK16-M20-90FLK20-M20-90FLK25-M25-90FLK34-M32-90
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
straight external threadOne piece, slim, fast fit, nylon external threaded fitting suitable for knockouts or threaded entries.
CONDUIT
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
BS EN IEC 61386
DON'T FORGET
See page 52
* Push in fittings available on Page 68
FITTINGS
STANDARDSORDERING NOTES
FPy system large diameter nylon
• Specify black or grey (B = Black, G = Grey)
eg: FPY80B-10M for Black 10m reel
• Available on request:
- longer lengths and bulk packaging
- cut lengths and assemblies
- alternative conduit material
outs
ide
dia
(mm
)
insid
e di
a (m
m)
min
insid
e be
nd
radi
us (m
m)
part
num
ber
reel
lengt
h (m
)
FP
y
nom
inal
size
(mm
)
80106
FL MP-80-FLFL MP-106-FL
part
num
ber
term
inat
ion
FL MPS-80-FLFL MPS-106-FL
part
num
ber
term
inat
ion
FL MPS90-80-FLFL MPS90-106-FL
part
num
ber
term
inat
ion
Construction: Nylon (PA6) corrugated flexible conduit. Colour black or grey.
Typical Applications: Machines and large control cabinets.
straight flanged nylon clamp fittingFlanged body with 2 clamps.
MP
straight flanged nylon clamp fitting with sealsFlanged body with 2 clamps and seals.
MPS
90° flanged nylon clamp fittingFlanged 90° body with 2 clamps.
MP90
90° flanged nylon clamp fitting with sealsFlanged 90° body with 2 clamps and seals.
MPS90
FPY80 10 80.0 67.0 160FPY106 10 106.0 91.5 210
FPy
• Highly flexible
• High impact strength and recovers if
crushed
• IP rating: IP40 or IP65
• Temperature range -40˚C to +120˚C
• Highly resistant to solvents and oils
• Self extinguishing
• Halogen, sulphur and phosphorus free
• UV resistant (black)
FL MP90-80-FLFL MP90-106-FL
part
num
ber
term
inat
ion
IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K IP68IP67IP66IP65IP54IP40 IP69K
77
CONDUIT
IP68IP67IP66IP65IP54IP40 IP69KIP68IP67IP66IP65IP54IP40 IP69K
BS EN IEC 61386
• FCC80 and FCC106 PVC lined
plated steel P-clips
euro
pean
(NW
) size
s
7095
AC
CE
SS
OR
IES
78
ww
w.fl
exic
on.u
k.co
m
nick
el pl
ated
br
ass
part
num
ber
metric locknuts
nickel plated brass, plated steel, stainless steel, nylon black or grey
PG locknuts
nickel plated brass, nylon black or grey
nylon metric
black
B-M12B-M16B-M20B-M25B-M32B-M40B-M50B-M63B-M75
plat
ed s
teel
part
num
ber
nick
el pl
ated
EM
Cpa
rt nu
mbe
r
S-M16S-M20S-M25S-M32S-M40S-M50S-M63
B-M20-EMCB-M25-EMCB-M32-EMCB-M40-EMC
nick
el pl
ated
br
ass
part
num
ber
B-PG7B-PG9B-PG11B-PG13B-PG16B-PG21B-PG29B-PG36B-PG42B-PG48
nylo
npa
rt nu
mbe
r
PG7-N#
PG9-N#
PG11-N#
PG13-N#
PG16-N#
PG21-N#
PG29-N#
PG36-N#
PG42-N#
PG48-N#
stain
less
stee
lpa
rt nu
mbe
r
SS-M16SS-M20SS-M25SS-M32SS-M40SS-M50*SS-M63*
nylo
npa
rt nu
mbe
r
LM12-N#
LM16-N#
LM20-N#
LM25-N#
LM32-N#
LM40-N#
LM50-N#
LM63-N#
met
ricpa
rt nu
mbe
r
SP-M12*SP-M16SP-M20SP-M25SP-M32
PG part
num
ber
SP-PG7*SP-PG9SP-PG11SP-PG13SP-PG16SP-PG21SP-PG29
90° elbow
internal and external threaded nickel plated brass 90° elbow
couplers
nickel plated brass internally threaded
rubber end sleeves
# add B or G to specify colour. eg. LM20-NB for Black
stop plug
part
num
ber
thre
ads
thre
ad
BM90-PG7BM90-16MBM90-20MBM90-25MBM90-32MBM90-40MBM90-50M
PG7M16M20M25M32M40M50
M16M20M25M32M40M50M63 M75
met
ric th
read
par
t nu
mbe
r
1316
20/212125
part
num
ber
to fi
t con
duit
size
55789
outle
t ID
mm
ES10-13ES14-17ES17-20ES19-22ES21-24
B-M16-CB-M20-CB-M25-CB-M32-CB-M40-CB-M50-CB-M63-CB-M75-C
* indicates parts made to order on request and may be subject to MOQ and lead time
stop plug
nylon PG
ACCESSORIES
met
ric th
read
part
num
ber
met
ric th
read
part
num
ber
sealing washers
cable glands
neoprene and fibre face sealing washers
earthing washers
shake proof washer
earth tag washer
SW12SW16SW20SW25SW32SW40SW50SW63
FW12FW16FW20FW25FW32FW40FW50FW63
met
ric th
read
part
num
ber
SPW16SPW20SPW25SPW32
met
ric th
read
part
num
ber
ET-M20ET-M25
PG th
read
part
num
ber
PG th
read
part
num
ber
SWPG7SWPG9SWPG11SWPG13SWPG16SWPG21SWPG29SWPG36SWPG42SWPG48
FWPG7FWPG9FWPG11FWPG13FWPG16FWPG21FWPG29FWPG36
FWPG48
fixing clips
plated steel with black pvc liner or stainless steel.
LFH liner available on request
part
num
ber
to fi
t con
duit
size
part
num
ber
10121620253240506375
FCC10FCC12FCC16FCC20FCC25FCC32FCC40FCC50FCC63FCC75
FCC10-SS*FCC12-SS*FCC16-SSFCC20-SSFCC25-SSFCC32-SSFCC40-SSFCC50-SS*
Red, white and grey supplied with locknut. Black supplied without locknut.
Technical Details
• Material: PA6• IP Rating; IP68 (4 bar) • Nitrile Rubber seal • Produced and tested in accordance
with EN 50262:1999• Temperature range; -20˚C to +90˚C
Technical Details
• Material: Nickel plated brass• IP Rating; IP68 (10bar) + IP69K • Produced and tested in accordance
with EN 50262:1999• Temperature range; -40˚C to +100˚C (static) -20˚C to +100˚C (dynamic)• UL Listed
Thread Black Red White Grey Thread Cable Dia Cable Dia Spanner PackSize. Part No. Part No. Part No. Part No. Length (mm) (min) (mm) (max) (mm) Size (mm) Quantity
M16 CGM16B CGM16R CGM16W CGM16G 11 5 10 22 100M20 CGM20SB CGM20SR CGM20SW CGM20SG 11 6 12 24 100M20 CGM20B CGM20R CGM20W CGM20G 11 10 14 27 100M25 CGM25B CGM25R CGM25W CGM25G 11 13 18 33 50M32 CGM32B 11 18 25 41 25
Thread Thread Cable Dia Cable Dia Spanner PackSize. Nickel plated brass Length (mm) (min) (mm) (max) (mm) Size (mm) Quantity
M16 B-M16-CG 12 4.5 10 20 10M20 B-M20-CG 12 7 13 24 10M25 B-M25-CG 12 9 17 29 10M32 B-M32-CG 15 11 21 36 2M40 B-M40-CG 15 19 28 45 2M50 B-M50-CG 15 27 35 54 1
FCL16B-P
FCL20B-P
FCL25B-P
FCL33B-P
FCL10
FCL13
FCL16
FCL20
FCL25
FCL34
FCL42
FCL54
cond
uit c
lip fo
r pl
ain o
r rig
id
cond
uit c
lip fo
r co
rruga
ted
conduit clip
79
Our range of Cable glands provides an easy to assemble, fast fit, liquid tight solution for multipurpose
applications.
Available in four colours, Black, Red (RAL 3020), White and Light Grey (RAL 7035) they have been
designed to provide the highest degree of functionality and safety.
nylon conduit clip with integral lid - black or grey
STANDARDS
* refer to technical details
available on request: EMC versions, short threaded, Reduced clamp range.
AC
CE
SS
OR
IES
80
ww
w.fl
exic
on.u
k.co
m
M16M20M25M32M40M50M63PG7PG9PG11PG13.5PG16PG21PG29PG36PG42PG48 1⁄2” NPT 3⁄4” NPT 1” NPT
M16
inte
rnal
thre
ad
external thread
convertors
nickel plated brass thread convertors, reducers and enlargers external
and internal thread
B-M20-M16
B-PG7-M16B-PG9-M16B-PG11-M16B-PG13-M16B-PG16-M16
M20
B-M16-M20
B-M25-M20
B-PG9-M20B-PG11-M20B-PG13-M20B-PG16-M20B-PG21-M20B-PG29-M20
B-050-M20B-075-M20
M25
B-M20-M25
B-M32-M25
B-PG16-M25B-PG21-M25B-PG29-M25
B-075-M25
M32
B-M25-M32
B-M40-M32B-M50-M32
B-PG21-M32B-PG29-M32B-PG36-M32
B-100-M32M
40
B-M32-M40
B-M50-M40B-M63-M40
B-PG29-M40B-PG36-M40
B-M48-M40
M50
B-M63-M50
PG7
M16M20M25M32M40M50PG7PG9PG11PG13.5PG16PG21PG29PG36PG42PG48
PG11external
thread
B-M16-PG11B-M20-PG11
B-PG9-PG11
B-PG13-PG11B-PG16-PG11B-PG21-PG11
PG13
.5
B-M20-PG13
B-PG11-PG13
B-PG16-PG13B-PG21-PG13
PG16
B-M20-PG16
B-PG13-PG16
B-PG21-PG16B-PG29-PG16
PG21
B-M20-PG21B-M25-PG21
B-PG16-PG21
B-PG29-PG21
PG29
B-M32-PG29B-M40-PG29
B-PG21-PG29
B-PG36-PG29
PG36
B-M50-PG36
B-PG29-PG36
B-PG42-PG36B-PG48-PG36
PG9
B-M16-PG9B-M20-PG9
B-PG7-PG9
B-PG11-PG9B-PG13-PG9B-PG16-PG9
inte
rnal
thre
ad
Metric Threads
PG Threads
B-M16-PG7B-M20-PG7
B-PG9-PG7B-PG11-PG7B-PG13-PG7B-PG16-PG7
ACCESSORIES
81
STANDARDS
The following tools and accessories are available to aid installation. See page 92 for cutting and assembly advice.
Alternatively visit our website & view our handy video clips to aid your installation.
tools
clampcutting vice to hold metallic conduits and guide hacksaw
BSB clamp
Part Number
hacksaw bladefine tooth (32 TPI) blade for standard hacksaw
HACKSAWBLADE
Part Number
bandsawbench mounted, 240v, fine toothed (32TPI) bandsaw
BANDSAWBANDSAWBLADE (spare blades)
Part Number
removal tool for push in Flexilok® fittings (see page 68)
RTPF20 FLK16-PL20, FLK20-PL20, FLK21-PL20RTPF25 FLK25-PL25, FLK28-PL25RTPF32 FLK34-PL32
Part Number For use with:
conduit cutterfor any non metallic flexible and rigid conduits
CC01 up to 34mm conduitsCC02 up to 67mm conduits
Part Number
slitting toolcan be used to slit all corrugated conduits down to 13mm
CS01 slitting tool
Part Number
slit conduit insertion toolfor easy installation of wires into slit conduit.
ST16 FPYS16 + FPYS12ST20 FPYS20ST25 FPYS25ST32 FPYS32
Part Number for conduit
AC
CE
SS
OR
IES
82
ww
w.fl
exic
on.u
k.co
m
10m conduit 10 fittings 10 locknuts
Each pack contains:
FPL-CP20W M20 thread
FPL-CP25W M25 thread
PVCwhite
SLIT POLyPROPyLENEgrey
FPYE-CP25B
FPPS-TP21G
Benefits• Simplistic ordering
• Easy storage
• Ready to use
• 10 white nylon Flexilok fittings
and locknuts FLK20-M20W or
FLK25-M25W
• IP66
• 1 part, fast fit
• Can be slipped over existing
cables to tidy up and protect them
• 1 slit conduit insertion tool ST20
• 10 metres of slit grey polypropylene
FPP21G
• Self extinguishing
• 10 metres of white corrugated UPVC
FPL20 or FPL25
• Pliable conduit for static applications
• Self extinguishing
CONTRACTOR PACKS CONDUIT FITTINGS
IP68IP67IP66IP65IP54IP40 IP69K
• 5 M20 fixed fittings
• 5 M20 swivel fittings
• 10 steel locknuts
• IP54FSU-CP20B M20 thread
• Temperature range -40˚C to +120˚C
• 10 FPA fittings and locknuts
FPA21-M20B or FPA25-M25B
• One part, fast fit
• Removable using a screwdriver
• High pull-off strength
• Anti-vibration
• IP66
• UV resistant
• 10 MPC fittings and locknuts
• IP65
• UV resistant
• 10 Flexilok fittings and locknuts
FLK20-M20B or FLK25-M25B
• IP66
• One part, fast fit
• 10 Flexilok (PP) fittings and locknuts
FLK20-M20-PP or FLK25-M25-PP
• IP66
• One part, fast fit
STEEL - pvc coating - black
NyLON - black
PVC SPIRAL- black
FPAS-CP21B M20 thread
FPAS-CP25B M25 thread
FPC-CP20B M20 thread
FPC-CP25B M25 thread
FPYE-CP20B M20 thread
FPYE-CP25B M25 thread
FPP-CP20B M20 thread
FPP-CP25B M25 thread
• 10 metres of polypropylene
FPP20 or FPP25
• Temperature range -20˚C to +90˚C
• Self extinguishing
• To specify grey change B to a G
eg: FPP-CP20G
• 10 metres of light weight nylon PA6
FPAL20 or FPAL25
• Flexible
• Halogen free
• Self extinguishing
• Temperature range
-40˚C to +120˚C
• 10 metres of spiral reinforced pvc
FPC20 or FPC25
• Highly flexible
• Accepts torsional movement
• Self extinguishing
• UV resistant
• Temperature range
-5˚C to +70˚C
• 10 metres of standard weight nylon
PA6 FPAS21 or FPAS25
• Low fire hazard
• Halogen free
• Self extinguishing
• Low smoke and Low toxicity
• High flexibility and fatigue life
• High impact strength
• Oil and solvent resistant
• UV resistant
• 10 metres of galvanised steel with
PVC coating
• Temperature range
-15˚C to +70˚C
• Self extinguishing
• High mechanical strength
• Highly flexible
NyLON- black
POLyPROPyLENE- black or grey
CONDUIT FITTINGS
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
IP68IP67IP66IP65IP54IP40 IP69K
STANDARDS
83DON'T FORGETSee page 52
84
manual switching action) for building occupants as well as
reducing your carbon footprint.
Lighting is one of the most significant loads within a
building (often accounting for 70% in a commercial office
environment). Our Control products can be used to
control lighting, heating and ventilation for the purpose of
energy savings.
Energy management doesn’t need to be complicated.
Energy savings can be quickly realised by using our
simple and easy to use range of Timer products.
Ensuring that lighting and other loads are only on when
required can greatly reduce your electricity bill. Automatic
control can offer improved functionality (by bringing lights
on automatically when required rather than requiring a
Our Control products can be
used to control lighting,
heating and ventilation for
the purpose of energy
savings.
energy management products
Range of Products• Pneumatic push button timeswitches - FTS
• Electronic push button timeswitches - FTE
Flexicon Timeswitch range;The easy to use, easy to fit switch that turns off automatically with an adjustable time delay.
• No more switches left on - save money
• Reduce wasted energy and work to environmental targets
• Single gang design suits new installations or replaces existing wall switches
• Ideal for staircases, hallways and corridors
• Simple to install - fits standard 20mm or 25mm BS single gang accessory boxes
• IP66 version suitable for outdoor applications
• Slave connection available on Electronic switches
• Large push pad eases activation
• Aesthetic design - no screws visible fixingww
w.fl
exic
on.u
k.co
mA
CC
ES
SO
RIE
S
85
time delay switches
Pneumatic
Par t No.
FTS40
FTS41
FTS42
FTS43
FTS163
Description
Single Pole Changeover
Single Pole Changeover c/w Neon
Double Pole Changeover
Double Pole Changeover c/w Neon
Weatherproof Shroud
Time Delay Switches Product Selection; • Switch Current at 240V AC: Incandescent (GLS) 6A Fluorescent 3A Compact fluorescent 3A (6 fittings max) • Adjustable Time Delay: 10 seconds to 10 minutes • Connections: No neutral required NO (normally open) and NC (normally closed) contacts Use as intermediate if wired in parallel FTS40
Electronic
Par t No.
FTE2PBE
FTE2PBP
Description
Single pole timer - ECO
Single pole timer - Premier
Time Delay Switches Product Selection; • Switch Current at 240V AC: Incandescent (GLS) 16A Fluorescent 16A Compact fluorescent 16A • Adjustable Time Delay: FTE2PBE 5 secs. to 20 mins. FTE2PBP 5 secs. to 2 hrs. • Connections: No neutral required Use as intermediate if wired in parallel Slave connection available FTE2PBP
• NB. For connection diagrams
see pages 93 or visit our website.
Par t No.
FTE2PBW
Description
Single pole timer - Waterproof
Weatherproof Time Delay Switches
Product Selection; • Switch Current at 240V AC: Incandescent (GLS) 16A Fluorescent 16A Compact fluorescent 16A • Adjustable Time Delay: FTE2PBW 5 secs. to 2 hrs. • Connections: No neutral required Use as intermediate if wired in parallel Slave connection available • IP rating IP66
FTE2PBW
TE
CH
NIC
AL D
ATA
86
ww
w.fl
exic
on.u
k.co
mresistance to chemicals
Page number conduit system
HYDR
OCHL
ORIC
ACI
D (3
0%)
HYDR
OCHL
ORIC
ACI
D (1
0%)
FREO
N 32
ETHY
LENE
GLY
COL
ETHY
LAM
INE
ETHE
R
ETHA
NOL
DIET
HYLA
MIN
E
DIES
EL O
IL
CRES
OL
COPP
ER S
ULPH
ATE
CITR
IC A
CID
CHLO
ROFO
RM
CARB
ON T
ETRA
CHLO
RIDE
BENZ
ENE
ALUM
INIU
M C
HLOR
IDE
ACET
ONE
ACET
IC A
CID
(10%
)
ASTM
NO.
3
ASTM
NO.
2
ASTM
NO.
1
L L L L L
L L L
L L L
L L L L L L
L L
L L L L L L L L L L L L
L L L L L
L L L L L L L L
L L L L L L L L
L L L L L L L L
L L L L L
L L L
L L L L L L
20
20
22
22
24
24
26
26
26
26
28
28
40
40
40
40
galvanised steel
stainless steel, grade 316
galvanised steel, pvc coated
galvanised steel, nylon coated
galvanised steel, LFH coated
galvanised steel, polyurethane coated
galv steel, pvc coated, liquid tight
galv steel, thermoplastic rubber, liquid tight
galv steel, pvc coated, liquid tight
galv steel, pvc coated, liquid tight
stainless steel, pvc coated, liquid tight
galv steel, polyurethane coated, liquid tight
PA6 corrugated, SS316 overbraid
PA6 corrugated, tinned copper overbraid
PA12 corrugated, SS316 overbraid
PA12 corrugated, SS316 overbraid
FU
SSU
FSU
FNU
LFHU
FPU
LTP
LTPHC
LTPUL
LTPE
LTPSS
LTPPU
FPRSS
FPRTC
FPISS
FPIHSS
32
32
34
34
36
36
38
galv steel, pvc, galv steel overbraid
galv steel, LFH coated, SS316 overbraid
galvanised steel, galv steel overbraid
galvanised steel, SS316 overbraid
L L L L L L L L L Lgalvanised steel, pvc coated, pliableFLP
L L L galvanised steel, LFH coated, pliableLFHP32
galvanised steel, pliableFL
FSB
LFHUBRD
FB
FUSSB
LTPBRDgalv steel, rubber coated, SS316 overbraid
28
28
galv steel, braided core, pvc coated, liquid tight
galv steel, braided core, pvc coated, liquid tight
LTBRDP
LTBRDLFH L L L
L L L L L L L L
L L
good resistanceL limited resistance
PP suitable with polypropylene fittingsSS suitable with stainless steel fittingskey X poor resistance
L L L L L L
L L L L L L
L L L L L
87
metallic conduit and fittings
SODI
UM H
YDRO
XIDE
(60%
)
SODI
UM H
YDRO
XIDE
(10%
)
SULP
HURI
C AC
ID (1
0%)
SULP
HUR
DIOX
IDE
(GAS
)
TOLU
ENE
1,1,
1-TR
ICHL
OROE
THAN
E
TRAN
SFOR
MER
OIL
TURP
ENTI
NE
TRIC
HLOR
OETH
YLEN
E
VINY
L AC
ETAT
E
VEGE
TABL
E OI
L
WHI
TE S
PIRI
T
WAT
ER
ZINC
CHLO
RIDE
SODI
UM C
HLOR
IDE
SKYD
ROL
SILV
ER N
ITRA
TE
SEA
WAT
ER
PHEN
OL
PETR
OL
PARA
FFIN
OIL
OZON
E (G
AS)
OXAL
IC A
CID
NITR
IC A
CID
(60%
)
NITR
IC A
CID
(10%
)
MEK
MET
HYL
BROM
IDE
MET
HANO
L
LUBR
ICAT
ING
OIL
LACT
IC A
CID
HYDR
OGEN
PER
OXID
E (6
0%)
HYDR
OGEN
PER
OXID
E (3
0%)
galvanised steel
stainless steel, grade 316
galvanised steel, pvc coated
galvanised steel, nylon coated
galvanised steel, LFH coated
galvanised steel, polyurethane coated
galv steel, pvc coated, liquid tight
galv steel, thermoplastic rubber, liquid tight
galv steel, pvc coated, liquid tight
galv steel, pvc coated, liquid tight
stainless steel, pvc coated, liquid tight
galv steel, polyurethane coated, liquid tight
PA6 corrugated, SS316 overbraid
PA6 corrugated, tinned copper overbraid
PA12 corrugated, SS316 overbraid
PA12 corrugated, SS316 overbraid
FU
SSU
FSU
FNU
LFHU
FPU
LTP
LTPHC
LTPUL
LTPE
LTPSS
LTPPU
FPRSS
FPRTC
FPISS
FPIHSS
SS SS L
L L L L L L L L L L
L L L L L L
L L L L L L L
L L L L L SS SS SS L
L L L L LSS SS SS L L L
L L L L L
L L L L L
L L L
galv steel, pvc, galv steel overbraid
galv steel, LFH coated, SS316 overbraid
galvanised steel, galv steel overbraid
galvanised steel, SS316 overbraid
galv steel, rubber coated, SS316 overbraid
FSB
LFHUBRD
FB
FUSSB
LTPBRD
L L L L L L
L L L L L L L
L L L L L
L L L L L LSS SS SS L L L
L L L L L L LSS SS SS L L L L
galv steel, braided core, pvc coated, liquid tight
galv steel, braided core, pvc coated, liquid tight
LTBRDP
galvanised steel, pvc coated, pliableFLP L L L L L L L L L L L L L
galvanised steel, LFH coated, pliableLFHP L L L L L L L
galvanised steel, pliableFL
LTBRDLFH L L L L L L L
L L L L L LSS SS SS L L L
L L L L LSS SS SS L L L
The char t above is based on exposure to single chemicals at room temperature and should be used as a selection guide. For additional chemicals, higher concentrations, elevated temperatures or combinations of chemicals, please call +44 (0)1675 466900 for technical advice.
L L L L L L L L L L L L L L L
L L L L L L L L L L L L L L L
L L L L L SS SS SS L
TE
CH
NIC
AL D
ATA
88
ww
w.fl
exic
on.u
k.co
m
resistance to chemicals
50
50
51
51
51
51
52
52&69
52
52
52
72
72
72
72
74
74
74
74
76&69
77
nylon LFH PA6 corrugated, std weight
nylon PA6 corrugated, light weight
nylon PA12 corrugated, standard weight
nylon PA12 corrugated, heavy weight
nylon PA6 corrugated, light weight
nylon PA6 double slit corrugated
polypropylene corrugated, std weight
polypropylene corrugated, non flame retarded
polypropylene corrugated, heavy weight
pvc spiral reinforced black
pvc spiral reinforced grey
smooth, pvc spiral reinforced
upvc corrugated
nylon PA6, large diameter, std weight
FPAS
FPAL
FPI
FPIH
FPy
FPADS
FPP
FPP-NFR
FPPH
FPCB
FPCG
FPCGN
FPCBU
LPC
LPCO
LPCGN
LPCBU
FPL
FPy
pvc spiral reinforced green oil resistant
pvc spiral reinforced blue high temperature
smooth pvc spiral orange ultra flexible
smooth pvc spiral blue high temperature
smooth pvc spiral green oil resistant
Page number conduit system
HYDR
OCHL
ORIC
ACI
D (3
0%)
HYDR
OCHL
ORIC
ACI
D (1
0%)
FREO
N 32
ETHY
LENE
GLY
COL
ETHY
LAM
INE
ETHE
R
ETHA
NOL
DIET
HYLA
MIN
E
DIES
EL O
IL
CRES
OL
COPP
ER S
ULPH
ATE
CITR
IC A
CID
CHLO
ROFO
RM
CARB
ON T
ETRA
CHLO
RIDE
BENZ
ENE
ALUM
INIU
M C
HLOR
IDE
ACET
ONE
ACET
IC A
CID
(10%
)
ASTM
NO.
3
ASTM
NO.
2
ASTM
NO.
1
L L
L L
L L L L L L
L L
L PP L L L L L PPPP
L PP L L L L L PPPP
L PP L L L L L PPPP
L L
L L L L L L L
L L L L L L L L L L
L L L L L L L L L L
L L L L L L L L
L L L L L L L L L L
L L L L L L L L
L L L L L L
nylon extra LFH PA6 corrugated, std weightFPR L L
nylon LFH PA6 corrugated, heavy weightFPAH L L
L L L L L L L L
L L L L L L L L
L L L L L L L L
L L
good resistanceL limited resistance
PP suitable with polypropylene fittingsSS suitable with stainless steel fittingskey X poor resistance
89
non-metallic conduit and fittings
nylon LFH PA6 corrugated, std weight
nylon PA6 corrugated, light weight
nylon PA12 corrugated, standard weight
nylon PA12 corrugated, heavy weight
nylon PA6 corrugated, light weight
nylon PA6 double slit corrugated
polypropylene corrugated, std weight
polypropylene corrugated, non flame retarded
polypropylene corrugated, heavy weight
pvc spiral reinforced black
pvc spiral reinforced grey
smooth, pvc spiral reinforced
upvc corrugated
nylon PA6, large diameter, std weight
FPAS
FPAL
FPI
FPIH
FPy
FPADS
FPP
FPP-NFR
FPPH
FPCB
FPCG
FPCGN
FPCBU
LPC
LPCO
LPCGN
LPCBU
FPL
FPy
pvc spiral reinforced green oil resistant
pvc spiral reinforced blue high temperature
smooth pvc spiral orange ultra flexible
smooth pvc spiral blue high temperature
smooth pvc spiral green oil resistant
SODI
UM H
YDRO
XIDE
(60%
)
SODI
UM H
YDRO
XIDE
(10%
)
SULP
HURI
C AC
ID (1
0%)
SULP
HUR
DIOX
IDE
(GAS
)
TOLU
ENE
1,1,
1-TR
ICHL
OROE
THAN
E
TRAN
SFOR
MER
OIL
TURP
ENTI
NE
TRIC
HLOR
OETH
YLEN
E
VINY
L AC
ETAT
E
VEGE
TABL
E OI
L
WHI
TE S
PIRI
T
WAT
ER
ZINC
CHLO
RIDE
SODI
UM C
HLOR
IDE
SKYD
ROL
SILV
ER N
ITRA
TE
SEA
WAT
ER
PHEN
OL
PETR
OL
PARA
FFIN
OIL
OZON
E (G
AS)
OXAL
IC A
CID
NITR
IC A
CID
(60%
)
NITR
IC A
CID
(10%
)
MEK
MET
HYL
BROM
IDE
MET
HANO
L
LUBR
ICAT
ING
OIL
LACT
IC A
CID
HYDR
OGEN
PER
OXID
E (6
0%)
HYDR
OGEN
PER
OXID
E (3
0%)
L L L L L
L L L L L
nylon extra LFH PA6 corrugated, std weightFPR L L L L L
nylon LFH PA6 corrugated, heavy weightFPAH L L L L L
L L L L L
L L L L L
L L L L L
PP L PPPPPP PPPP L L L
PP L PPPPPP PPPP L L L
PP L PPPPPP PPPP L L L
L L L L L
L L L
L L L L L L L L L L
L L L L L L L L L L
L L L L LSS SS SS L L L
L L L L L L L L L L
L L L L LSS SS L L L
L L L L LSS SS L L L
L L L L LSS SS SS L L L
L L L L LSS SS L L L
L L L L L
The char t above is based on exposure to single chemicals at room temperature and should be used as a selection guide. For additional chemicals, higher concentrations, elevated temperatures or combinations of chemicals, please call +44 (0)1675 466900 for technical advice.
90
thread data and cable carrying capacity
UNEF Thread size External thread Internal thread Pitch imperial sizes (inches) outside diameter (mm) inside diameter (mm) mm
American unified thread conforming to BS1580 used on circular connectors
5⁄8" - 24 UNEF 5⁄8" 15.9 14.7 1.06 3⁄4" - 20 UNEF 3⁄4" 19.1 17.7 1.27 7⁄8" - 20 UNEF 7⁄8" 22.2 20.9 1.27
1" - 20 UNEF 1" 25.4 24.0 1.27
13⁄16" - 18 UNEF 13⁄16" 30.2 28.6 1.41
13⁄8" - 18 UNEF 13⁄8" 34.9 33.4 1.41
11⁄4" - 18 UNEF 11⁄4" 31.8 30.2 1.41
17⁄16" - 18 UNEF 17⁄16" 36.5 35.0 1.41
13⁄4" - 18 UNS 13⁄4" 44.5 42.9 1.41
2" - 18 UNS 2" 50.8 49.3 1.41
21⁄4" - 18 UN 21⁄4" 57.2 55.4 1.41
Nominal Nominal overall cross conductor size (mm2) sectional area (mm2) of cable
UK wiring regulations BS7671, recommend that the total cross sectional area of the sum of the individual cables should not exceed 40% of the cross sectional area of the conduit. The nominal cross sectional area of single-core, stranded, PVC insulated cables is provided as a guide only. Other cables may have different dimensions.
1.0 6.6
1.5 7.6
2.5 9.6
4.0 14.5
6.0 18.8
10.0 29.3
16.0 40.2
25.0 63.8
35.0 83.5
50.0 113.0
70.0 149.0
95.0 204.0
M12 12.0 10.4 1.5
M16 16.0 14.4 1.5
M20 20.0 18.4 1.5
M25 25.0 23.4 1.5
M32 32.0 30.4 1.5
M40 40.0 38.4 1.5
M50 50.0 48.4 1.5
M63 63.0 61.4 1.5
M75 75.0 73.4 1.5
Thread size External thread Internal thread Pitch outside diameter (mm) inside diameter (mm) mm
standard thread conforming to EN60423
metric
Thread size External thread Internal thread Pitch outside diameter (mm) inside diameter (mm) mm
German standard thread conforming to DIN40430
PG7 12.5 11.3 1.27
PG9 15.2 13.9 1.41
PG11 18.6 17.3 1.41
PG13.5 20.4 19.1 1.41
PG16 22.5 21.2 1.41
PG21 28.3 26.8 1.59
PG29 37.0 35.5 1.59
PG36 47.0 45.5 1.59
PG42 54.0 52.5 1.59
PG48 59.3 57.8 1.59
PG
1⁄2" 21.0 18.6 1.81 3⁄4" 26.4 24.1 1.81
1" 33.3 30.3 2.31
11⁄4" 41.9 39.0 2.31
11⁄2" 47.8 44.8 2.31
2" 59.6 56.7 2.31
Thread size External thread Internal thread Pitch (inches) outside diameter (mm) inside diameter (mm) mm
Japanese conduit thread conforming to JIS B 0202
PF/ gas
UNEF/UNS/UN
3⁄8" 16.7 1.14 1⁄2" 21.0 1.81 3⁄4" 26.4 1.81
1" 33.3 2.21
11⁄4" 41.9 2.21
11⁄2" 47.8 2.21
2" 59.6 2.21
Thread size External thread Pitch (inches) outside diameter (mm) mm
American taper pipe thread conforming to ANS/ASME B1.20.1 - 1983
NPT
cable carrying capacity
Example: is LTP20 suitable for five 4.0mm2 cables?
• The total cross sectional area of the conductors is 5 x 14.5mm2 = 73mm2
• The cross sectional area of LTP20 is 3.142 x [inside diameter]2 = 201mm2
2
• % of conduit cross sectional area 73 = 36% 201
This is less than 40%; therefore this conduit is suitable for this combination of cables.
UK wiring regulations BS7671 prohibit the use of flexible or pliable conduit as an earthing conductor.
Where conduits of 40mm and above penetrate fire barriers in buildings the wiring regulations stipulate that internal seals should be used to maintain fire resistance.
To meet the UK wiring regulations conduit should be self extinguishing unless they are to be buried or contained in non combustible material e.g: concrete or plaster.
Please telephone the Flexicon hotline for further guidance.
UK wiring regulations
ww
w.fl
exic
on.u
k.co
mT
EC
HN
ICA
L D
ATA
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
STANDARD
EMCSCREEN
ENHANCED
EMCSCREEN
SUPER
EMCSCREEN
Flexicon has classified EMC screening as follows
Standard 50dB @ IMHz Enhanced 60dB @ IMHz Super 70dB @ IMHz
91
IP rating and technical guidance
IP ratings guide
(Ingress Protection to BS EN 60529)
1st digit – protection against solid objects
0 No protection
1 Protected against objects greater than 50mm
2 Protected against objects greater than 12mm
3 Protected against objects greater than 2.5mm
4 Protected against objects greater than 1.0mm
5 Ingress of dust is not totally prevented but dust does not enter in harmful quantities
6 No ingress of dust
2nd digit – protection against water
0 No protection
1 Protected against falling drops
2 Protected against drops falling at 15°
3 Low pressure spray – similar to shower head at up to 60° from vertical
4 Low pressure spray – similar to shower head – from any angle for 5 minutes
5 Medium pressure jet – similar to garden hose – from any angle for 3 minutes
6 High pressure jet – similar to fire hose – from any angle for 3 minutes
7 Submersion at 1 metre for 30 minutes
8 Higher water pressure eg: 2 bar for 2 hours. Conduits are tested in-house at up to 10 bar. (equivalent to 100m underwater)
9K Steam clean, high pressure high temp jet wash to DIN40050.
Technical guidance
Application advice
Flexicon can offer impartial advice on which of our wide range of conduit systems is most suited to your application. Factors which may be important include:-
Standards, performance and approvals
Flexicon conduits and fittings are manufactured by Flexicon to comply with the IEC and European conduit standard BS EN IEC 61386 - see classification table below.
Certain tests are carried out internally by Flexicon, other testing is carried out externally by accredited test laboratories. Specific test reports are available upon request.
Vibration and shock testing to EN61373 Cat 2.
Certain conduit systems have been tested and approved to the relevant parts of the Australian Standard AS2053.
Where product performance data over and above the requirements of BS EN IEC 61386 is provided e.g: Low Fire Hazard testing and EMC screening, other appropriate standards have been used.
Cable glands are manufactured to EN 50262.
Push button timers are manufactured to EN 60730-2-7.
Further information regarding standards and approvals can be found on page 96.
Technical data sheets are available for most productsPlease call 01675 466900 for technical information and application advice.
• Compression strength• Tensile strength• Impact strength• Temperature range• Flexibility• Fatigue life• Electrical insulation or continuity • IP rating• Chemical resistance• Corrosion resistance• Abrasion resistance
• UV resistance• Anti vibration• Fire performance• EMC screening• Dimensions• Weight• Colours• Ease of installation• Anti tamper• Hazardous Areas
IP40IP40
IP40IP40
0 None declared 0 None declared None declared
1 V. Light (125) V. Light (0.5) 5 60 Rigid Continuous 1 Low in & out V. Light (100) Non Flame Propogating V. Light (20)
2 Light (320) Light (1) -5 90 Pliable Insulating 2 Medium in & out Light (250) Flame Propogating Light (30)
3 Medium (750) Medium (2) -15 105 Pliable self recoving Continuous + Insulating 3 3 Medium in & high out Medium (500) Medium (150)
4 Heavy (1250) Heavy (6) -25 120 Flexible 4 4 High in & out Heavy (1000) Heavy (450)
5 V. Heavy (4000) V. Heavy (20) -45 150 5 5 V. Heavy (2500) V. Heavy (850)
6 250 6 6
7 400 7
Leve
l
1st d
igit
Com
pres
sion
Stre
ngth
N/50
mm
2nd
digi
tIm
pact
Stre
ngth
Jo
ules
at
min
tem
p
3rd
digi
tM
inim
um
Tem
p de
g C
4th
digi
tM
axim
um
Tem
p de
g C
5th
digi
tCo
ndui
t Ty
pe
6th
digi
tEl
ectri
cal
Prop
ertie
s
7th
digi
tIP
Rat
ing
Solid
s
8th
digi
tIP
Rat
ing
Wat
er
9th
digi
tCo
rros
ion
Resi
stan
ce(w
ater
)
10th
dig
itTe
nsile
St
reng
th N
11th
dig
itFl
ame
Prop
ogat
ion
12th
dig
itSu
spen
ded
Load
N/4
8hr
IP tests are type tests of short duration and do not guarantee long term performance. EN 60529 states that equipment conforming to to IP67 or IP68 cannot be assumed to meet IP66 and that the manufacturer shall declare the pressure and duration of the test, for example, FPAX 2 bar for 2 hours.
Buyer beware
Classif ication of conduit systems to BS EN IEC 61386
92
cutting & assembly guidance
ww
w.fl
exic
on.u
k.co
mT
EC
HN
ICA
L D
ATA
Visit our website for instructional videos offering useful hints on how to speed up your conduit installation using our products – www.flexicon.uk.com
Cutting Conduit
Non-metallic conduits and FLP up to 34mm can be easily cut with Flexicon Conduit Cutters, part no. CC01. Use CC02 for sizes up to 67mm. Drop the blade into a corrugation and squeeze and twist until conduit is cut 50% through. Cut the remaining 50% without twisting to achieve a square cut.
Non-Metallic
Metallic conduits should be cut with a fine tooth (32 TPI) hacksaw or bandsaw. Ensure you make a straight vertical cut. Our clamping vice, part no. BSB makes the use of a hacksaw much easier.
Metallic
Cutting of overbraided conduit is made much easier by tightly wrapping self adhesive tape around the conduit and sawing through the middle of the tape. The tape should be removed if EMC screening is required. Ensure you make a straight vertical cut.
Overbraided
Flexicon offer a bench mounted bandsaw designed to cut metallic conduit easily – see Page 81. Conduit length is measured under light tension. When cutting an exact number of lengths from a reel (e.g. 5 x 5m from 25m) please take into account the length tolerance of the reel and each cut length.
Non-Metallic Fittings
FPA Fitting FPA
Our range of non-metallic conduit fittings, Flexilok®, FPA and FPAX are all push fit fittings which are quick to assemble once you have cut the conduit to length.
For Flexilok® and FPA fittings simply push the conduit into the end of the fitting with a slight twist until it will go no further. Pull back slightly to ensure the locking teeth mechanism has engaged with the corrugations.
The FPAX fitting features a conduit seal to provide the ultimate IP rating up to IP69K. This simply fits onto the end of the conduit before the fitting is connected to the conduit. To aid assembly moisten this seal. An FPA fitting cannot be uprated to IP69K with the addition of a seal. Pull back slightly to ensure the locking teeth mechanism has engaged with the corrugations.
FPAX
To remove the FPA or FPAX fittings simply insert a small screwdriver into the screwdriver slot and move the screwdriver handle towards the “off” position. Remove the screwdriver then manually twist the cap further towards the off position - the fitting can then be released from the conduit. Once removed, the fitting can be reused by simply twisting the cap so that the screwdriver slot lines up with the ON position.
Metallic Fittings
FSU Conduit Insert being fitted
Our fitting's components are supplied part assembled to illustrate how they go together. Our C type fittings consist of a compression nut, an elastomeric seal, an insert and a body.
Firstly place the back nut on the conduit followed by the seal (note the orientation). Next, screw the insert into the end of the conduit until this gives a secure fit.
Bring the body to mate with the back nut. Metal fittings should be tightened with grips or spanner to ensure security and IP rating.
Attaching the body
93
cutting & assembly guidance
Our type-C braided fittings consist of an outer compression nut, an inner compression nut, an elastomeric seal, an insert and a body. Firstly place the outer compression nut on the conduit as per 1. Remove the tape securing the braid and pull back to allow the inner compression nut to be fitted as per 2. Next, fit the elastomeric seal (note the orientation) and screw the insert into the end of the conduit until this gives a secure fit as per 3.
Bring the body to mate with the inner compression nut and secure. Next, bring the back shell to mate with the inner compression nut to secure the braid as per 4. Metal fittings should be tightened with grips or spanner to ensure securing and IP rating as per 5.
We recommend that SW rubber sealing washers are used with plastic threads and FW fibre washers are used with metal threads to maintain IP rating between systems, see page 79.
The easiest way of installing cables into flexible and pliable conduit is to simultaneously draw in the cables with the conduit in straight condition before installation.
Snap in Flexilok® fittings can be removed by using a tool – see page 81
Safety Warning:
The product should be installed by a qualified electrician in accordance with the latest edition of the UK wiring regulations.
Disconnect the power supply before attempting any work on the Timer or connected circuits.
The electrical connection lead must be dead during installation. Therefore, switch off the mains power first and verify that the circuit is dead using a voltage tester.
BRAIDED FITTINGS
GENERAL
EMC SCEENING USING PLIABLE CONDUIT PUSH IN FLEXILOK® REMOVAL TOOL
FTS Pneumatic Timeswitch connections
1. Corridor lighting
2. Staircase lighting
3. Two way switching
To obtain EMC screening on pliable FLP conduit, the PVC sheath must be trimmed back prior to assembly of the fitting to ensure good electrical contact with the tapered bore of the fitting body as shown
1 2 3 4 5
FLP conduit with sheath trimmed back
FTE Electronic Timeswitch connections: FTE2PBE, FTE2PBP and FTE2PBW
1. Conventional
2. Multiple
3. Replace intermediate
FTE
FTE FTE FTE
FTE
Energy Management Products Refer to our website to view a copy of our product instruction sheets
FTE
94
low fire hazard (LFH) performancew
ww
.flex
icon
.uk.
com
TE
CH
NIC
AL D
ATA
LFH encompasses LSF (low smoke and fume) and LSOH (low smoke zero halogen)
TE
CH
NIC
AL D
ATA Low Fire Hazard (LFH) conduit systems are becoming an increasing part of the specification
in many cabling applications. Public buildings, retail outlets, high rise office blocks, hospitals and transport installations - these are just a few of the instances where Low Fire Hazard products may be demanded.
Low Fire Hazard systems are required to protect personnel
and property in the event of a fire and may be demanded by
specifiers, occupiers, fire services or even insurers.
At Flexicon we define a Low Fire Hazard product by having all
of the following properties:
• Highly Flame Retardant to prevent a fire or limit its
development if one does start.
• Low Smoke emission in the event of a fire to enable
personnel to see their way to escape.
• Low Toxicity in the event of a fire to ensure personnel
are not overcome during their escape.
• Halogen Free gives an indication of low smoke and low
toxicity. It also rules out halogen acid gas emission - a fact
that is of interest to insurers as acid smoke can destroy
computer equipment and damage the structure of
a building. Halogens are Fluorine, Chlorine, Bromine
and Iodine.
Tests used
Flame Retardancy BS EN IEC 61386 tests that conduits and
fittings are self extinguishing. Vertical samples of conduit are
subjected to a 1KW flame test. Fittings are subjected to a 750°C
glow wire test.
BS EN ISO 4589 determines the Limiting Oxygen Index (LOI) of
a material. This is the percentage of oxygen in the air that would
have to be present for the material to burn. Normal air contains
21% oxygen, BS 6853:1999, the UK code of practice for railway
rolling stock requires 28% LOI for overground and 34% LOI for
underground passenger carriages.
UL 94 is a UL (Underwriters Laboratories) standard to assess
the flammability of materials. Classifications are HB, V2, V1, and
V0 in order of increasing flame retardancy. UL 94 HB allows
horizontal burning up to a certain rate, UL 94 V0 is highly
flame retardant.
Smoke Opacity is evaluated by burning a known amount of
product or material in a specified smoke chamber. A light is
shone through the smoke and the loss in transmittance of light
is measured over time.
Toxicity is evaluated by burning a sample of material under
known conditions. The fumes are analysed to find the volume of
each gas that is given off. The volume of each gas is multiplied
by its toxic potency to give a toxicity index for the material.
Standards
All of the following standards assess flame retardancy, smoke
emission and toxicity including halogen content.
BS 6853 UK rail rolling stock
LUL 1-085 London Underground rolling stock and
stations
NFF 16-101/2 French rail rolling stock
DIN 5510 German rail rolling stock
TS 45545 New European rail rolling stock
AS/NZS 1530 Australian/New zealand rail rolling stock
Defence Standard UK Ministry Of Defence
61-12 part 31
Buyer Beware
All four properties: Highly Flame Retardant, Low Smoke,
Low Toxicity, Halogen Free, must be present to claim LFH.
Halogen free does not assure low smoke and low toxicity.
A low smoke and fume product may not be self-extinguishing let
alone highly flame retardant. Ensure your supplier provides
performance data on all four aspects of Low Fire Hazard
performance.
Full independent test reports are available on request.
95
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
Performance of Flexicon LFH Products
FU, SSU, FB, FUSSB and metal fittings
These products are made exclusively of metal (steel, stainless steel
or brass) and are all inherently low fire hazard.
Fully compliant to LUL Std I-085 LUL product registration certificate
296.
LFHU, LFHP, LTBRDLFH and LFHUBRD
Self extinguishing to EN 61386
Highly flame retardant LOI = 43%
UL 94 V0
Low smoke to BS6853 maximum opacity Ao = 0.01
Compliant to BS 6853:1999 -
Table 7 Interior use, for Categories 1a, 1b, II
Table 8 Exterior use, for Categories 1a, 1b, II
Compliant with GM/RT2120 issue 2, Appendix 1
Low toxicity toxicity index to NES713 = 1
Compliant to LUL Std I-085 Limited and dispersed use.
LUL product registration certificate 297
Halogen, sulphur & phosphorus free
FPAS and FPAH
s Self extinguishing to EN 61386
Highly flame retardant LOI = 26%
UL 94 V2
Low smoke to BS6853 maximum opacity Ao = 0.02
Low toxicity toxicity index to BS6853
Annex B = 1.55
Ignition and fume rating to NFF16-101/2 = I4F1
Halogen, sulphur & phosphorus free
FPI, FPIH, FPISS and FPIHSS
Self extinguishing to EN 61386
Flame retardant LOI = 22%
Low smoke to BS6853 maximum opacity Ao = 0.05
Low toxicity toxicity index to BS6853
Annex B = 1.32
Ignition and fume rating to NFF16-101/2 = I4F2
Halogen, sulphur & phosphorus free
FPR, FPRSS and FPRTC
Self extinguishing to EN 61386
Highly flame retardant - LOI = 35%
- UL 94 V0
Low smoke to BS6853 - maximum opacity Ao = 0.01
Compliant to BS 6853:1999 -
Table 7 Interior use, for Categories 1a, 1b, II
Table 8 Exterior use, for Categories 1a, 1b, II
Compliant with GM/RT2120 issue 2, Appendix 1
Low toxicity - toxicity index to BS6853
Annex B = 0.99
Ignition and fume rating to - NFF16-101/2 = I2F1
DIN 5510 rating = S4 SR2 ST2
Compliant to LUL Std I-085 Limited and dispersed use LUL
product registration certificate 298
Halogen, sulphur & phosphorus free
Nylon fittings (PA66)
Self extinguishing to EN 61386
Highly flame retardant - LOI = 28%
- UL 94 V2
Low smoke to BS6853 - maximum opacity Ao = 0.03
Compliant to BS 6853:1999 -
Table 7 Interior use, for Category II
Table 8 Exterior use, for Category II
Compliant with GM/RT2120 issue 2, Appendix 1
Low toxicity - toxicity index to NES713 = 10
Ignition and fume rating to - NFF16-101/2 = I3F2
Halogen, sulphur & phosphorus free
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
STANDARDLOW FIREHAZARD
EXTRALOW FIREHAZARD
INHERENTLOW FIREHAZARD
96
Standards and Approvals
ww
w.fl
exic
on.u
k.co
mT
EC
HN
ICA
L D
ATA ISO 9001
Flexicon is accredited to ISO 9001 2008 by the British
Standards Institution (BSI) for the design and manufacture
of conduit systems and accessories. Certificate No FM58347.
BS EN IEC 61386BS EN IEC 61386 is the new worldwide standard for conduit systems and is
superceding the previous European conduit standard EN 50086. Flexicon were one of
the first companies in the UK to have its products tested to the new standard.
Our Technical Director, Ian Gibson, is the chairman of both the IEC (worldwide) and
CENELEC (European) committees that prepare conduit standards.
CEFlexicon are marked with the CE mark to show that they comply with the essential
requirements of the relevant European Directives.
RoHSAll Flexicon’s products meet the requirements of the European RoHS Directive,
Restriction of Hazardous substances. This precludes the use of certain toxic
materials and heavy metals.
REACHAll Flexicon products in the catalogue meet the requirement of the European REACH
regulation, Regulation, Evaluation, Authorisation and restriction of Chemicals.
Lloyds Register of Shipping Type ApprovalSpecific conduit systems from Flexicon have Lloyds Register
of Shipping Type Approval having been assessed for suitability
for marine and other arduous applications.
Standards Australia (AS)Standards Australia is Australia’s peak standards body. It co-ordinates standardisation
activities, develops internationally aligned Australian Standards and facilitates the
accreditation of other Standards Development Organisations. Certain conduit systems
have been tested and approved to the relevant parts of the Australian Standard AS2053.
WEEEFlexicon’s conduit products are not covered by the European WEEE Directive, Waste
Electrical and Electric Equipment.
FM58347
BSEN ISO9001 2008
BS EN IEC 61386
REACh
Standards Australia
(AS)
97
North American ApprovalsMost of Flexicon’s nylon conduits and fittings have UL (Underwriters
Laboratories) recognition for component use within UL listed equipment.
File No. E229161.
Some nylon conduits have cUL listing to the UL standard UL1660 and
CSA standard C22.2 No. 227.2.1. File No. 246572.
Some nylon fittings have cUL listing to UL514B and CSA standard C22.2
No. 18.3-04. File No. E247502.
LTPUL conduit is UL listed to UL360 and CSA approved.
FPC conduits and MPC fittings are UL recognised to UL1696 and CSA standard 22.2 No. 227
for use in USA and Canada. File No. E229161.
Rail accreditationsFlexicon’s Low Fire Hazard conduits and fittings have been independently
tested to following international rail fire standards.
France NFF 16-101/2, Germany DIN 5510, UK BS 6853, London
Underground LUL 1-085 GM/RT2120, Australia/New zealand AS/NzS
1530, European TS 45545.
Flexicon holds a wide range of Product Registration Certificates issued
by Transport for London, London Underground Ltd.
Hazardous Area ApprovalsFlexicon’s EXD glands have been tested and accredited by SIRA to both ATEX and IECEx
Ex d, Ex e and Ex t applications.
UK MODFlexicon is a registered supplier to the UK Ministry of Defence NCAGE No. U5256 and holds
NATO codification numbers for specific conduits.
BEAMA Installation MemberBEAMA Installation Limited is the UK's trade body for manufacturers of electrical installation
and cable management products.
Flexicon Ltd
Supplier Number: 21015
Date Printed: 17 November 2010
Peter Brookes
Expiry Date: 19 November 2011
Rail Sector Manager
Certificate Number: 51952-21015/77384
Achilles Information Limited
Errors, omissions and amendments excepted Information given in this catalogue is for guidance only as our policy is one
of continuous development and specifications may change. Flexicon is not
liable for claims arising from product misuse.
Terms and Conditions of Sale Products are supplied subject to Flexicon terms and conditions of sale.
These can be viewed on our website www.flexicon.uk.com
PART INDEX
98
ww
w.fl
exic
on.u
k.co
m
B-050-M20B-075-M20B-075-M25B-100-M32BandsawBandsaw BladesBC16-M16-CBC16-M16-SBC16-PG11-SBC21-M20-CBC21-M20-C90BC21-M20-SBC21-PG16-SBC28-M25-CBC28-M25-SBC28-PG21-SBC34-M32-CBC34-M32-SBC34-PG29-SBC42-M40-CBC42-M40-SBC54-M40-SBC54-M50-CB-M12B-M16B-M16-CB-M16-CGB-M16-M20B-M16-PG11B-M16-PG7B-M16-PG9B-M20B-M20-CB-M20-CGB-M20-EMCB-M20-M16B-M20-M25B-M20-PG11B-M20-PG13B-M20-PG16B-M20-PG21B-M20-PG7B-M20-PG9B-M25B-M25-CB-M25-CGB-M25-EMCB-M25-M20B-M25-M32B-M25-PG21B-M32B-M32-CB-M32-CGB-M32-EMCB-M32-M25B-M32-M40B-M32-PG29B-M40B-M40-CB-M40-CGB-M40-EMCB-M40-M32B-M40-M48B-M40-PG29B-M50B-M50-CB-M50-CGB-M50-M32B-M50-M40B-M50-PG36B-M63B-M63-CB-M63-M40B-M63-M50B-M75B-M75-CBM90-16MBM90-20MBM90-25MBM90-32MBM90-40MBM90-50MBM90-PG7B-PG11B-PG11-M16B-PG11-M20B-PG11-PG13B-PG11-PG7B-PG11-PG9B-PG13B-PG13-M16B-PG13-M20B-PG13-PG11B-PG13-PG16B-PG13-PG7B-PG13-PG9B-PG16B-PG16-M16B-PG16-M20B-PG16-M25B-PG16-PG11B-PG16-PG13B-PG16-PG21B-PG16-PG7B-PG16-PG9B-PG21B-PG21-M20B-PG21-M25B-PG21-M32B-PG21-PG11B-PG21-PG13B-PG21-PG16B-PG21-PG29B-PG29B-PG29-M20
80808080818140404040414040404040404040404040407878787980808080787879788080808080808080787879788080807878797880808078787978808080787879808080787880807878787878787878787880808080807880808080808078808080808080808078808080808080807880
B-PG29-M25B-PG29-M32B-PG29-M40B-PG29-PG16B-PG29-PG21B-PG29-PG36B-PG36B-PG36-M32B-PG36-M40B-PG36-PG29B-PG42B-PG42-PG36B-PG48B-PG48-PG36B-PG7B-PG7-M16B-PG7-PG9B-PG9B-PG9-M16B-PG9-M20B-PG9-PG11B-PG9-PG7BSBCC01CC02CGM16BCGM16GCGM16RCGM16WCGM20BCGM20GCGM20RCGM20SBCGM20SGCGM20SRCGM20SWCGM20WCGM25BCGM25GCGM25RCGM25WCGM32BCS01EC16BEC21BEC28BEC34BEC42BEC54BES10-13ES14-17ES17-20ES19-22ES21-24ET-M20ET-M25FB12-25MFB12-M16-MFB12-M16-SFB12-PFB12-PG9-MFB12-PG9-SFB16-25MFB16-M16-MFB16-M16-SFB16-M20-MFB16-M20-SFB16-PFB16-PG11-MFB16-PG11-SFB20-25MFB20-M20-MFB20-M20-SFB20-PFB20-PG16-MFB20-PG16-SFB25-25MFB25-M25-MFB25-M25-SFB25-PFB25-PG21-MFB25-PG21-SFB32-25MFB32-M32-MFB32-M32-SFB32-PFB32-PG29-MFB32-PG29-SFB40-10MFB40-M40-MFB40-M40-SFB40-PFB40-PG36-MFB40-PG36-SFB50-10MFB50-M50-MFB50-M50-SFB50-PFB50-PG48-MFB50-PG48-SFCC10FCC10-SSFCC12FCC12-SS FCC16FCC16-SSFCC20FCC20-SSFCC25FCC25-SSFCC32FCC32-SSFCC40FCC40-SSFCC50
80808080808078808080788078807880807880808080818181797979797979797979797979797979797981717171717171787878787879793636363736363636363636373636363636373636363636373636363636373636363636373636363636373636797979797979797979797979797979
FCC50-SS FCC63FCC75FCL10FCL13FCL16FCL16B-PFCL18FCL20FCL20B-PFCL20WFCL20W-PFCL21FCL25FCL25B-PFCL25WFCL25W-PFCL28FCL32FCL33B-PFCL34FCL40FCL42FCL50FCL54FL20-25MFL20-M20-CFL25-25MFL25-M25-CFLK10-M12FLK13-M16FLK13-PG9FLK16-FLK16FLK16-M16FLK16-M16-90FLK16-M16BPPFLK16-M20FLK16-M20-90FLK16-PG11FLK16-PG13FLK16-PL20FLK20-FLK20FLK20-FLK20WFLK20-M20FLK20-M20-90FLK20-M20-90WFLK20-M20BPPFLK20-M20WFLK20-PL20FLK21-FLK21FLK21-M20FLK21-M20-90FLK21-PG16FLK21-PG16-90FLK21-PL20FLK25-FLK25FLK25-FLK25WFLK25-M25FLK25-M25-90FLK25-M25-90WFLK25-M25BPPFLK25-M25WFLK25-PL25FLK28-FLK28FLK28-M25FLK28-M25-90FLK28-PG21FLK28-PG21-90FLK28-PL25FLK34-FLK34FLK34-M32FLK34-M32-90FLK34-M32BPPFLK34-M32WFLK34-PG29FLK34-PG29-90FLK34-PL32FLK42-M40FLK54-M50FLP16B-25MFLP16-M16-CFLP16-M16-C-HSFLP16-M16-F-HSFLP20B-10MFLP20B-25MFLP20B-50MFLP20-M20-CFLP20-M20-C-HSFLP20-M20-F-HSFLP25B-10MFLP25B-25MFLP25B-50MFLP25-M25-CFLP25-M25-C-HSFLP25-M25-F-HSFLP32B-10MFLP32B-25MFLP32-M32-CFLP32-M32-C-HSFLP32-M32-F-HSFLP40B-25MFLP40-M40-C-HSFLP40-M40-F-HSFLP50B-20MFLP50-M50-C-HSFLP50-M50-F-HSFNU16B-25MFNU20B-25MFNU25B-25MFNU32B-10MFPA10-M12FPA10-M12-90FPA10-M16FPA10-PG7FPA10-PG7-90
79797979797979527979696952797969695252797952795279323232326868686868686868686868686869686869686968686868686868686968686968696868686868686868686868696868686868323233333232323233333232323233333232323333323333323333222222225454545454
FPA10-PG9FPA11-M12FPA11-M12-90FPA11-PG7FPA13-BFM16FPA13-BFM16-90FPA13-BFPG9FPA13-BFPG9-90FPA13-BM16FPA13-BM16-90FPA13-BM16-CGFPA13-BM16-CG-90FPA13-BPG9FPA13-BPG9-90FPA13-M12FPA13-M16FPA13-M16-90FPA13-M20FPA13-PG11FPA13-PG7FPA13-PG9FPA13-PG9-90FPA13-R16 FPA13-R21FPA13-R28FPA16-038FPA16-050FPA16-050-45FPA16-050-90FPA16-13-13FPA16-BFM16FPA16-BFM16-90FPA16-BFM20FPA16-BFM20-45FPA16-BFM20-90FPA16-BFPG11FPA16-BFPG11-90FPA16-BFPG16FPA16-BFPG16-45FPA16-BFPG16-90FPA16-BM16FPA16-BM16-45FPA16-BM16-90FPA16-BM16-CGFPA16-BM16-CG-45FPA16-BM16-CG-90FPA16-BM20FPA16-BM20-45FPA16-BM20-90FPA16-BM20-CGFPA16-BM20-CG-45FPA16-BM20-CG-90FPA16-BPG11FPA16-BPG11-90FPA16-BPG11-CG FPA16-BPG13-45FPA16-BPG16-45FPA16-BPG16-CG FPA16-BPG9FPA16-BPG9-90FPA16-BU075FPA16-BU075-90FPA16-BU100FPA16-BU100-45FPA16-BU100-90FPA16-BU119FPA16-BU119-45FPA16-BU119-90FPA16-FLFPA16-FL-45FPA16-FL-90FPA16-FPA16FPA16-M16FPA16-M16-90FPA16-M20FPA16-M20-45FPA16-M20-90FPA16-MPC16FPA16-PG11FPA16-PG11-90FPA16-PG13FPA16-PG13-45FPA16-PG13-90FPA16-PG16FPA16-PG9FPA16-PG9-90FPA16-R21FPA16-R28FPA16-R34FPA16TFPA18-M20FPA18-M20-90FPA18-PG13FPA18-PG13-90FPA18-PG16FPA18-PG16-90FPA20-FPA20FPA20-M20FPA20-M20-90FPA20-R28FPA20TFPA21-050FPA21-050-45FPA21-050-90FPA21-16-16FPA21-BFM20FPA21-BFM20-45FPA21-BFM20-90FPA21-BFPG16FPA21-BFPG16-45FPA21-BFPG16-90FPA21-BM20FPA21-BM20-45FPA21-BM20-90FPA21-BM20-CG
54545454575857585757595957575454545454545454666666545455546657585758585758575858575857595959575857595959575759585859575754555455555455555456555654545455545654545455545454546666666654545454545456545466665455546657585857585857585759
Part Number Page Part Number Page Part Number Page Part Number Page
FPA21-BM20-CG-45FPA21-BM20-CG-90FPA21-BPG13FPA21-BPG13-45FPA21-BPG13-90FPA21-BPG16FPA21-BPG16-45FPA21-BPG16-90FPA21-BPG16-CG FPA21-BU100FPA21-BU100-45FPA21-BU100-90FPA21-BU119FPA21-BU119-45FPA21-BU119-90FPA21-BU138FPA21-BU138-45FPA21-BU138-90FPA21-FLFPA21-FL-45FPA21-FL-90FPA21-FPA21FPA21-M20FPA21-M20-45FPA21-M20-90FPA21-M20-SBCAFPA21-MPC20FPA21-PG13FPA21-PG13-45FPA21-PG13-90FPA21-PG16FPA21-PG16-45FPA21-PG16-90FPA21-R28FPA21-R34FPA21-R42FPA21TFPA25-FPA25FPA25-M25FPA25-M25-90FPA25-R28FPA28-075FPA28-075-45FPA28-075-90FPA28-21-21FPA28-BFM25FPA28-BFM25-45FPA28-BFM25-90FPA28-BFPG21FPA28-BFPG21-45FPA28-BFPG21-90FPA28-BM25FPA28-BM25-45FPA28-BM25-90FPA28-BM25-CGFPA28-BM25-CG-45FPA28-BM25-CG-90FPA28-BPG21FPA28-BPG21-45FPA28-BPG21-90FPA28-BPG21-CG FPA28-BU144FPA28-BU144-45FPA28-BU144-90FPA28-BU175FPA28-BU175-45FPA28-BU175-90FPA28-FLFPA28-FL-45FPA28-FL-90FPA28-FPA28FPA28-M25FPA28-M25-45FPA28-M25-90FPA28-M25-SBCAFPA28-M32FPA28-MPC25FPA28-PG21FPA28-PG21-45FPA28-PG21-90FPA28-PG29FPA28-R34FPA28-R42FPA28TFPA34-100FPA34-100-45FPA34-100-90FPA34-28-28FPA34-BFM32FPA34-BFM32-45FPA34-BFM32-90FPA34-BFPG29FPA34-BFPG29-45FPA34-BFPG29-90FPA34-BM32FPA34-BM32-45FPA34-BM32-90FPA34-BM32-CGFPA34-BM32-CG-45FPA34-BM32-CG-90FPA34-BPG29FPA34-BPG29-45FPA34-BPG29-90FPA34-BPG29-CG FPA34-BU175FPA34-BU175-45FPA34-BU175-90FPA34-FLFPA34-FL-45FPA34-FL-90FPA34-FPA34FPA34-M32FPA34-M32-45FPA34-M32-90FPA34-M32-SBCA
59595758575758575954555554555554555554565556545554425654555454555466666666565454665455546657585857585857585759595957585759545555545555545655565455544254565455545466666654555466575858575858575857595959575857595455555456555654555442
FPA34-M40FPA34-MPC32FPA34-PG29FPA34-PG29-45FPA34-PG29-90FPA34-R42FPA34TFPA42-125FPA42-125-90FPA42-150FPA42-150-45FPA42-150-90FPA42-BFM40FPA42-BFM50-45 FPA42-BFM50-90FPA42-BM40FPA42-BM40-CGFPA42-BM40-CG-45FPA42-BM40-CG-90FPA42-BM50FPA42-BM50-45 FPA42-BM50-90FPA42-BU200FPA42-BU200-45FPA42-BU200-90FPA42-BU225FPA42-BU225-45FPA42-BU225-90FPA42-FLFPA42-FL-45FPA42-FL-90FPA42-M40FPA42-M40-90FPA42-M40-SBCAFPA42-M50FPA42-M50-45FPA42-M50-90FPA42-MPC40FPA42-PG36FPA42-PG36-45FPA42-PG36-90FPA42TFPA54-150FPA54-150-45FPA54-150-90FPA54-200FPA54-200-90FPA54-BFM50FPA54-BFM50-45 FPA54-BFM50-90FPA54-BM50FPA54-BM50-45 FPA54-BM50-90FPA54-BM50-CG FPA54-BM50-CG-45FPA54-BM50-CG-90FPA54-BM63FPA54-BU200FPA54-BU200-45FPA54-BU200-90FPA54-BU225FPA54-BU225-45FPA54-BU225-90FPA54-FL-45FPA54-FL-90FPA54-FPA54FPA54-M50FPA54-M50-45FPA54-M50-90FPA54-M63FPA54-M63-90FPA54-PG42FPA54-PG48FPA54-PG48-90FPA67-200FPA67-200-90FPA67-BM63FPA67-M63FPA67-M63-90FPA67-PG48FPA67-PG48-90FPADS11-50M FPADS13-50M FPADS16-50MFPADS21-50MFPADS28-50MFPADS34-25MFPADS42-25MFPADS54-25MFPAH13-50MFPAH16-50MFPAH21-50MFPAH25-50MFPAH28-50MFPAH34-25MFPAH42-25MFPAH54-25MFPAL10-50MFPAL11-50MFPAL13-50MFPAL16-50MFPAL18-50MFPAL20-50MFPAL21-50MFPAL25-50MFPAL28-50MFPAL34-25MFPAL34-50MFPAL42-25MFPAL54-25MFPAL67-10MFPAS10-50MFPAS11-50MFPAS13-50MFPAS16-25M
54565455546666545454555457585857595959575857545555545555545655545442545554565455546654555454545758585758575959595754555554555556555654555454545454545454575454545452525252525252525151515151515151505050505050505050505050505050505050
FPAS16-50MFPAS18-50MFPAS20-50MFPAS21-25MFPAS21-50MFPAS21CB-50MFPAS25-50MFPAS28-25MFPAS28-50MFPAS28C-50M FPAS34-25MFPAS34-50MFPAS34FB-25MFPAS42-10MFPAS42-25MFPAS54-10MFPAS54-25MFPAS67-10MFPAS-CP21BFPAS-CP25BFPAX13-BFM16FPAX13-BFM16-90FPAX13-BFPG9FPAX13-BFPG9-90FPAX13-BM16FPAX13-BM16-90FPAX13-BM16-CGFPAX13-BM16-CG-90FPAX13-BPG9FPAX13-BPG9-90FPAX13-M16FPAX13-M16-90FPAX13-PG9FPAX13-PG9-90FPAX13-R16FPAX16-038FPAX16-050FPAX16-050-45FPAX16-050-90FPAX16-13-13FPAX16-BFM16FPAX16-BFM16-90FPAX16-BFM20FPAX16-BFM20-45FPAX16-BFM20-90FPAX16-BFPG11FPAX16-BFPG11-90FPAX16-BFPG16FPAX16-BFPG16-45FPAX16-BFPG16-90FPAX16-BM16FPAX16-BM16-45FPAX16-BM16-90FPAX16-BM16-CGFPAX16-BM16-CG-45FPAX16-BM16-CG-90FPAX16-BM20FPAX16-BM20-45FPAX16-BM20-90FPAX16-BM20-CGFPAX16-BM20-CG-45FPAX16-BM20-CG-90FPAX16-BPG11FPAX16-BPG11-90FPAX16-BPG11-CGFPAX16-BPG13-45FPAX16-BPG16-45FPAX16-BPG16-CG FPAX16-BPG9FPAX16-BPG9-90FPAX16-BU075FPAX16-BU075-90FPAX16-BU100FPAX16-BU100-45FPAX16-BU100-90FPAX16-BU119FPAX16-BU119-45FPAX16-BU119-90FPAX16-FLFPAX16-FL-45FPAX16-FL-90FPAX16-M16FPAX16-M16-90FPAX16-M20FPAX16-M20-45FPAX16-M20-90FPAX16-PG11FPAX16-PG11-90FPAX16-PG13 FPAX16-PG13-45FPAX16-PG13-90 FPAX16-PG9 FPAX16-R21FPAX16-R28FPAX16-R34FPAX16TFPAX21-050FPAX21-050-45FPAX21-050-90FPAX21-16-16FPAX21-BFM20FPAX21-BFM20-45FPAX21-BFM20-90FPAX21-BFPG16FPAX21-BFPG16-45FPAX21-BFPG16-90FPAX21-BM20FPAX21-BM20-45FPAX21-BM20-90FPAX21-BM20-CGFPAX21-BM20-CG-45FPAX21-BM20-CG-90FPAX21-BPG13FPAX21-BPG13-45FPAX21-BPG13-90
50505050505050505050505050505050505083836364636463636565636360616061676060626167636463646463646364646364636565656364636565656363656464656363606160626160626160626160616062616061606261606767676760626167636464636464636463656565636463
FPAX21-BPG16FPAX21-BPG16-45FPAX21-BPG16-90FPAX21-BPG16-CG FPAX21-BU100FPAX21-BU100-45FPAX21-BU100-90FPAX21-BU119FPAX21-BU119-45FPAX21-BU119-90FPAX21-BU138FPAX21-BU138-45FPAX21-BU138-90FPAX21-FLFPAX21-FL-45FPAX21-FL-90FPAX21-M20FPAX21-M20-45FPAX21-M20-90FPAX21-M20-SBCAFPAX21-PG13 FPAX21-PG13-45FPAX21-PG13-90 FPAX21-PG16FPAX21-PG16-45FPAX21-PG16-90FPAX21-R28FPAX21-R34FPAX21-R42FPAX21TFPAX23-TFPAX28-075FPAX28-075-45FPAX28-075-90FPAX28-21-21FPAX28-BFM25FPAX28-BFM25-45FPAX28-BFM25-90FPAX28-BFPG21FPAX28-BFPG21-45FPAX28-BFPG21-90FPAX28-BM25FPAX28-BM25-45FPAX28-BM25-90FPAX28-BM25-CGFPAX28-BM25-CG-45FPAX28-BM25-CG-90FPAX28-BPG21FPAX28-BPG21-45FPAX28-BPG21-90FPAX28-BPG21-CG FPAX28-BU144FPAX28-BU144-45FPAX28-BU144-90FPAX28-BU175FPAX28-BU175-45FPAX28-BU175-90FPAX28-FLFPAX28-FL-45FPAX28-FL-90FPAX28-M25FPAX28-M25-45FPAX28-M25-90FPAX28-M25-SBCAFPAX28-PG21FPAX28-PG21-90FPAX28-PG29 FPAX28-R34FPAX28-R42FPAX28TFPAX34-100FPAX34-100-45FPAX34-100-90FPAX34-28-28FPAX34-BFM32FPAX34-BFM32-45FPAX34-BFM32-90FPAX34-BFPG29FPAX34-BFPG29-45FPAX34-BFPG29-90FPAX34-BM32FPAX34-BM32-45FPAX34-BM32-90FPAX34-BM32-CGFPAX34-BM32-CG-45FPAX34-BM32-CG-90FPAX34-BPG29FPAX34-BPG29-45FPAX34-BPG29-90FPAX34-BPG29-CG FPAX34-BU175FPAX34-BU175-45FPAX34-BU175-90FPAX34-FLFPAX34-FL-45FPAX34-FL-90FPAX34-M32FPAX34-M32-45FPAX34-M32-90FPAX34-M32-SBCAFPAX34-M40FPAX34-PG29FPAX34-PG29-45FPAX34-PG29-90FPAX34-R42FPAX34TFPAX42-125FPAX42-125-90FPAX42-150FPAX42-150-45FPAX42-150-90FPAX42-BFM40FPAX42-BFM50-45FPAX42-BFM50-90FPAX42-BM40
63646365606261606261606261606261606261426062616062616767676767606261676364646364646364636565656364636560626160626160626160626142606160676767606261676364646364646364636565656364636560626160626160626142606062616767606160626163646463
Part Number Page Part Number Page Part Number Page Part Number Page
99
100
ww
w.fl
exic
on.u
k.co
m
Part Number Page Part Number Page Part Number Page Part Number Page
PART INDEX
FPIH16B-50MFPIH21B-50MFPIH28B-50MFPIH34B-25MFPIH42B-25MFPIH54B-25MFPIHSS16-50MFPIHSS21-50MFPIHSS28-50MFPIHSS34-25MFPIHSS42-25MFPIHSS54-25MFPISS16-50MFPISS21-50MFPISS28-50MFPISS34-25MFPISS42-25MFPISS54-25MFPL16-100MFPL20-100MFPL20W-100MFPL25-50MFPL25W-50MFPL32-25MFPL-CP20WFPL-CP25WFPP10-50MFPP13-50MFPP16-50MFPP20-50MFPP20W-50MFPP21-50MFPP25-50MFPP25W-50MFPP26-50MFPP28-50MFPP34-50MFPP34W-50MFPP42-25MFPP54-25MFPP67-10MFPP-CP20BFPP-CP20GFPP-CP25BFPP-CP25GFPPS10-50MFPPS13-50MFPPS16-50MFPPS21-50MFPPS25-50MFPPS28-50MFPPS34-25MFPPS42-25MFPPS54-25MFPPS-TP21GFPR10B-50MFPR13B-50MFPR16B-50MFPR20B-50MFPR21B-50MFPR25B-50MFPR28B-50MFPR34B-50MFPR42B-25MFPR54B-25MFPRSS16-50MFPRSS21-50MFPRSS28-50MFPRSS34-50MFPRSS42-25MFPRSS54-25MFPRTC16-50MFPRTC21-50MFPRTC28-50MFPRTC34-50MFPRTC42-25MFPRTC54-25MFPU12B-25MFPU12B-25MFPU16B-25MFPU16B-25MFPU16B-50MFPU16B-50MFPU20B-25MFPU20B-25MFPU20B-50MFPU20B-50MFPU25B-25MFPU25B-25MFPU32B-25MFPU32B-25MFPU40B-10MFPU40B-10MFPU50B-10MFPU50B-10MFPU63B-10MFPU63B-10MFPU75B-10MFPU75B-10MFPY10-50MFPY106-10MFPY12-50MFPY16-50MFPY20-50MFPY25-50MFPY28-50MFPY32-25MFPY40-25MFPY50-25MFPY80-10MFPY8-50MFPYE-CP20BFPYE-CP25BFPYS10B-50MFPYS12B-50M
51515151515140404040404040404040404076766976697682825252525269525269525252695252528383838352525252525252525282515151515151515151514040404040404040404040402424242424242424242424242424242424242424242452775252525252525252775283835252
52525252525252523434343534343435353534343535353434353534343534353543353434353534343435354335343435353434343535433534343535343434343435343434343435343422222323222222222222222323232322222223222223222222232323232322222323232322222223
FSU16-PG11-MFSU16-PG11-SFSU16-PG13-CFSU16-PG13-SFSU20-050-CFSU20B-10MFSU20B-25MFSU20B-50MFSU20-EFSU20-FSU20FSU20-M20-CFSU20-M20-C90FSU20-M20-CGFSU20-M20-C-SFSU20-M20-FFSU20-M20-MFSU20-M20-SFSU20-PFSU20-PG16-CFSU20-PG16-MFSU20-PG16-SFSU25-075-CFSU25B-10MFSU25B-25MFSU25B-50MFSU25-EFSU25-FSU25FSU25-M25-CFSU25-M25-C90FSU25-M25-CGFSU25-M25-C-SFSU25-M25-FFSU25-M25-MFSU25-M25-SFSU25-PFSU25-PG21-CFSU25-PG21-MFSU25-PG21-SFSU32-100-CFSU32B-10MFSU32B-25MFSU32-EFSU32-M32-CFSU32-M32-C90FSU32-M32-CGFSU32-M32-C-SFSU32-M32-FFSU32-M32-MFSU32-M32-SFSU32-PFSU32-PG29-CFSU32-PG29-MFSU32-PG29-SFSU40B-10MFSU40B-25MFSU40-EFSU40-M40-CFSU40-M40-MFSU40-M40-SFSU40-PFSU40-PG36-MFSU40-PG36-SFSU50B-10MFSU50B-25MFSU50-EFSU50-M50-CFSU50-M50-MFSU50-M50-SFSU50-PFSU50-PG42-SFSU50-PG48-MFSU63B-10MFSU63-EFSU63-M63-MFSU63-M63-SFSU63-PFSU75B-10MFSU75-EFSU75-M75-MFSU75-PFSU-CP20BFTCB10-50MFTCB12-50MFTCB15FTCB15-50MFTCB20FTCB20-50MFTCB25FTCB25-50MFTCB30FTCB30-25MFTCB3-100MFTCB35FTCB35-25MFTCB4-100MFTCB50-25MFTCB5-100MFTCB6-100MFTE2PBEFTE2PBPFTE2PBWFTS163FTS40FTS41FTS42FTS43FU10-25MFU10-50MFU10-M12-MFU10-M12-SFU10-PFU10-PG7-MFU10-PG7-SFU12-25MFU12-50M
22222322232222222323232343232322222223222223222222232323234323232222222322222322222323234323232222222322222222232322222222222222232322222222222223222222222322228342424242424242424242424242424242428585858585858585202020202120202020
FPAX42-BM40-CGFPAX42-BM40-CG-45FPAX42-BM40-CG-90FPAX42-BM50FPAX42-BM50-45FPAX42-BM50-90FPAX42-BU200FPAX42-BU200-45FPAX42-BU200-90FPAX42-BU225FPAX42-BU225-45FPAX42-BU225-90FPAX42-FLFPAX42-FL-45FPAX42-FL-90FPAX42-M40FPAX42-M40-90FPAX42-M40-SBCAFPAX42-M50FPAX42-M50-45FPAX42-M50-90FPAX42-PG36FPAX42-PG36-45FPAX42-PG36-90FPAX42TFPAX54-150FPAX54-150-45FPAX54-150-90FPAX54-200FPAX54-200-90FPAX54-BFM50FPAX54-BFM50-45FPAX54-BFM50-90FPAX54-BM50FPAX54-BM50-45FPAX54-BM50-90FPAX54-BM50-CGFPAX54-BM50-CG-45 FPAX54-BM50-CG-90 FPAX54-BM63FPAX54-BU200FPAX54-BU200-45FPAX54-BU200-90FPAX54-BU225FPAX54-BU225-45FPAX54-BU225-90FPAX54-M50FPAX54-M50-45FPAX54-M50-90FPAX54-M63FPAX54-M63-90FPAX54-PG48FPAX54-PG42FPAX54-PG48-90FPC12B-30MFPC12BU-30M FPC12G-30M FPC12GN-30M FPC16B-30MFPC16BU-30MFPC16G-30MFPC16GN-30MFPC20B-30MFPC20BU-30MFPC20G-30MFPC20GN-30MFPC25B-30MFPC25BU-30MFPC25G-30MFPC25GN-30MFPC30B-30MFPC30G-30MFPC32B-10MFPC32B-30MFPC32BU-10MFPC32BU-30MFPC32G-10MFPC32G-30MFPC32GN-10MFPC32GN-30MFPC40B-10MFPC40B-30MFPC40BU-10M FPC40BU-30M FPC40G-10M FPC40G-30M FPC40GN-10M FPC40GN-30M FPC50B-10MFPC50B-30MFPC50BU-10M FPC50BU-30M FPC50G-10M FPC50G-30M FPC50GN-10M FPC50GN-30M FPC63B-10MFPC63B-30MFPC63BU-10MFPC63BU-30MFPC63G-10MFPC63G-30MFPC63GN-10MFPC63GN-30MFPC-CP20BFPC-CP25BFPI13-50MFPI16-50MFPI21-50MFPI28-50MFPI34-25MFPI42-25MFPI54-25MFPI67-10MFPIH13B-50M
65656563646360626160626160626160614260626160626167606261606163646463646365656563606261606261606261606160606172727272727272727272727272727272727272727272727272727272727272727272727272727272727272727272727272728383515151515151515151
FPYS16B-50MFPYS20B-50MFPYS25B-50MFPYS28B-50MFPYS32B-25MFPYS40B-25MFPYS50B-25MFPYS8B-50MFSB12-25MFSB12-M16-MFSB12-M16-SFSB12-PFSB12-PG9-MFSB12-PG9-SFSB16-25MFSB16-M16-CFSB16-M16-C90FSB16-M16-C-SFSB16-M16-MFSB16-M16-SFSB16-M20-CFSB16-M20-C90FSB16-M20-C-SFSB16-M20-MFSB16-M20-SFSB16-PFSB16-PG11-CFSB16-PG11-MFSB16-PG11-SFSB16-PG13-CFSB20-25MFSB20-M20-CFSB20-M20-C90FSB20-M20-CGFSB20-M20-C-SFSB20-M20-MFSB20-M20-SFSB20-PFSB20-PG16-CFSB20-PG16-MFSB20-PG16-SFSB25-25MFSB25-M25-CFSB25-M25-C90FSB25-M25-CGFSB25-M25-C-SFSB25-M25-MFSB25-M25-SFSB25-PFSB25-PG21-CFSB25-PG21-MFSB25-PG21-SFSB32-25MFSB32-M32-CFSB32-M32-C90FSB32-M32-CGFSB32-M32-C-SFSB32-M32-MFSB32-M32-SFSB32-PFSB32-PG29-CFSB32-PG29-MFSB32-PG29-SFSB40-10MFSB40-M40-MFSB40-M40-SFSB40-PFSB40-PG36-MFSB40-PG36-SFSB50-10MFSB50-M50-MFSB50-M50-SFSB50-PFSB50-PG42-SFSB50-PG48-MFSU10B-25MFSU10B-50MFSU10-EFSU10-M12-CFSU10-M12-MFSU10-M12-SFSU10-PFSU10-PG7-MFSU10-PG7-SFSU12B-25MFSU12B-50MFSU12-EFSU12-M16-CFSU12-M16-C90FSU12-M16-C-SFSU12-M16-MFSU12-M16-SFSU12-PFSU12-PG9-CFSU12-PG9-MFSU12-PG9-SFSU16-050-CFSU16B-10MFSU16B-25MFSU16B-50MFSU16-EFSU16-M16-CFSU16-M16-C90FSU16-M16-C-SFSU16-M16-FFSU16-M16-MFSU16-M16-SFSU16-M20-CFSU16-M20-C90FSU16-M20-C-SFSU16-M20-FFSU16-M20-MFSU16-M20-SFSU16-PFSU16-PG11-C
Part Number Page Part Number Page Part Number Page Part Number PageFU12-M16-MFU12-M16-SFU12-PFU12-PG9-MFU12-PG9-SFU16-10MFU16-25MFU16-50MFU16-M16-FFU16-M16-MFU16-M16-SFU16-M20-FFU16-M20-MFU16-M20-SFU16-PFU16-PG11-MFU16-PG11-SFU16-PG13-SFU20-10MFU20-25MFU20-50MFU20-M20-FFU20-M20-MFU20-M20-SFU20-PFU20-PG16-MFU20-PG16-SFU25-10MFU25-25MFU25-50MFU25-M25-FFU25-M25-MFU25-M25-SFU25-PFU25-PG21-MFU25-PG21-SFU32-10MFU32-25MFU32-M32-FFU32-M32-MFU32-M32-SFU32-PFU32-PG29-MFU32-PG29-SFU40-10MFU40-25MFU40-M40-MFU40-M40-SFU40-PFU40-PG36-MFU40-PG36-SFU50-10MFU50-25MFU50-M50-MFU50-M50-SFU50-PFU50-PG42-SFU50-PG48-MFU63-10MFU63-M63-MFU63-M63-SFU63-PFU75-10MFU75-M75-MFU75-PFUSSB20-25MFUSSB25-25MFUSSB32-25MFW12FW16FW20FW25FW32FW40FW50FW63FWPG11FWPG13FWPG16FWPG21FWPG29FWPG36FWPG48FWPG7FWPG9HACKSAWBLADELFHP16B-25MLFHP20B-25MLFHP25B-25MLFHP32B-25MLFHP40B-25MLFHP50B-25MLFHU12B-25MLFHU16B-25MLFHU16B-50MLFHU20B-25MLFHU20B-50MLFHU25B-25MLFHU25B-50MLFHU32B-10MLFHU32B-25MLFHU40B-10MLFHU40B-25MLFHU50B-10MLFHU50B-25MLFHU63B-10MLFHU75B-10MLFHUBRD20-25MLFHUBRD25-25MLFHUBRD32-25MLM12-NLM16-NLM20-NLM25-NLM32-N
20202120202020202120202120202120202020202021202021202020202021202021202020202120202120202020202021202020202020212020202020212020213636367979797979797979797979797979797979813333333333332424242424242424242424242424243434347878787878
LM40-NLM50-NLM63-NLPC12B-30MLPC12BU-30M LPC12G-30M LPC12GN-30M LPC12-M16-CLPC12-M16-C90LPC12O-30M LPC16B-30MLPC16BU-30MLPC16G-30MLPC16GN-30MLPC16-M16-CLPC16-M16-C90LPC16-M16-CSSLPC16-M16-SLPC16-M20-CLPC16-M20-C90LPC16-M20-CSSLPC16-M20-CSS90LPC16-M20-SLPC16O-30MLPC16-PG11-CLPC16-PG13-CLPC20B-10MLPC20B-30MLPC20BU-10MLPC20BU-30MLPC20G-10MLPC20G-30MLPC20GN-10MLPC20GN-30MLPC20-M20-CLPC20-M20-C90LPC20-M20-CGLPC20-M20-CSSLPC20-M20-CSS90LPC20-M20-SLPC20O-10MLPC20O-30MLPC20-PG16-CLPC25B-10MLPC25B-30MLPC25BU-10MLPC25BU-30MLPC25G-10MLPC25G-30MLPC25GN-10MLPC25GN-30MLPC25-M25-CLPC25-M25-C90LPC25-M25-CGLPC25-M25-CSSLPC25-M25-CSS90LPC25-M25-SLPC25O-10MLPC25O-30MLPC25-PG21-CLPC32B-10MLPC32B-30MLPC32BU-10MLPC32BU-30MLPC32G-10MLPC32G-30MLPC32GN-10MLPC32GN-30MLPC32-M32-CLPC32-M32-C90LPC32-M32-CGLPC32-M32-CSSLPC32-M32-CSS90LPC32-M32-SLPC32O-10MLPC32O-30MLPC32-PG29-CLPC40B-10MLPC40B-30MLPC40BU-10M LPC40BU-30M LPC40G-10M LPC40G-30M LPC40GN-10M LPC40GN-30M LPC40-M40-CLPC40-M40-C90LPC40O-10M LPC40O-30M LPC50B-10MLPC50B-30MLPC50BU-10M LPC50BU-30M LPC50G-10M LPC50G-30M LPC50GN-10M LPC50GN-30M LPC50-M50-CLPC50-M50-C90LPC50O-10M LPC50O-30M LPC63B-10MLPC63B-30MLPC63BU-10M LPC63BU-30M LPC63G-10M LPC63G-30M LPC63GN-10M LPC63GN-30M LPC63-M63-CLPC63-M63-C90LPC63O-10M LPC63O-30M LTBRDLFH20B-25MLTBRDLFH25B-25M
78787874747474757574747474747575757575757575757475757474747474747474757543757575747475747474747474747475754375757574747574747474747474747575437575757474757474747474747474757574747474747474747474757574747474747474747474757574742828
LTBRDLFH32B-25MLTBRDP20B-25MLTBRDP25B-25MLTBRDP32B-25MLTBRDP40B-10MLTBRDP50B-10MLTP10B-50MLTP10-ELTP10-M12-CLTP10-M16-CLTP12B-25MLTP12B-50MLTP12-ELTP12-M16-CLTP12-M16-C90LTP12-M16-SLTP12-PG9-C LTP16-050-CLTP16B-10MLTP16B-25MLTP16B-50MLTP16-ELTP16-M16-CLTP16-M16-C90LTP16-M16-CSSLTP16-M16-SLTP16-M20-CLTP16-M20-C45LTP16-M20-C90LTP16-M20-CSSLTP16-M20-CSS90LTP16-M20-EXDLTP16-M20-SLTP16-PG11-CLTP16-PG13-CLTP20-050-CLTP20B-10MLTP20B-25MLTP20B-50MLTP20-ELTP20-LTP20LTP20-M20-CLTP20-M20-C45LTP20-M20-C90LTP20-M20-CGLTP20-M20-CSSLTP20-M20-CSS90LTP20-M20-EXDLTP20-M20-SLTP20-PG16-CLTP25-075-CLTP25B-10MLTP25B-25MLTP25B-50MLTP25-ELTP25-LTP25LTP25-M25-CLTP25-M25-C45LTP25-M25-C90LTP25-M25-CGLTP25-M25-CSSLTP25-M25-CSS90LTP25-M25-EXDLTP25-M25-SLTP25-PG21-CLTP32-100-CLTP32B-10MLTP32B-25MLTP32-ELTP32-M32-CLTP32-M32-C45LTP32-M32-C90LTP32-M32-CGLTP32-M32-CSSLTP32-M32-CSS90LTP32-M32-EXDLTP32-M32-SLTP32-PG29-CLTP40-175-CLTP40B-10MLTP40B-25MLTP40-ELTP40-M40-CLTP40-M40-C45LTP40-M40-C90LTP40-M40-CSS LTP40-M40-CSS90 LTP40-M40-EXDLTP40-M40-SLTP40-PG36-C LTP50B-10MLTP50B-25MLTP50-ELTP50-M50-CLTP50-M50-C45LTP50-M50-C90LTP50-M50-CSS LTP50-M50-CSS90 LTP50-M50-EXDLTP50-M50-SLTP50-PG42-C LTP63B-10MLTP63B-25MLTP63-ELTP63-M63-CLTP63-M63-C45LTP63-M63-C90LTP63-M63-CSS LTP63-M63-CSS90 LTP63-M63-EXDLTP63-PG48-C LTPB16-M16-CLTPB16-M16-C90LTPB16-M16-SLTPB16-M20-C
28282828282826272626262627262727262626262627262729272627272929312726262626262627272627274329293127262626262627272627274329293127262626262726272743292931272626262627262727292931272626262726272729293127262626272627272929312638393838
LTPB16-M20-C90LTPB16-M20-SLTPB20-M20-CLTPB20-M20-C90LTPB20-M20-SLTPB25-M25-CLTPB25-M25-C90LTPB25-M25-SLTPB32-M32-CLTPB32-M32-C90LTPB32-M32-SLTPB40-M40-CLTPB40-M40-C90LTPB40-M40-SLTPB50-M50-CLTPB50-M50-C90LTPB50-M50-SLTPBRD16-25MLTPBRD20-25MLTPBRD25-25MLTPBRD32-25MLTPBRD40-10MLTPBRD50-10MLTPE16-25MLTPE20-25MLTPE25-25MLTPE32-10MLTPE32-25MLTPE40-10MLTPE40-25MLTPE50-10MLTPE50-25MLTPE63-10MLTPE63-25MLTPHC12B-25MLTPHC16B-25MLTPHC20B-25MLTPHC25B-25MLTPHC32B-25MLTPHC40B-10MLTPHC50B-10MLTPHC63B-10MLTPPU10B-25MLTPPU12B-25MLTPPU16B-25MLTPPU20B-25MLTPPU25B-25MLTPPU32B-25MLTPPU40B-10MLTPPU50B-10MLTPPU63B-10MLTPSS16-25MLTPSS20-25MLTPSS25-25MLTPSS32-10MLTPUL16B-25MLTPUL20B-25MLTPUL25B-25MLTPUL32B-15MLTPUL40B-15MLTPUL50B-15MLTPUL63B-15MMP-106-FLMP-12-M16MP-16-M16MP-16-M20MP-20-M20MP-25-M25MP-28-M25MP-32-M32MP-40-M40MP-50-M50MP-80-FLMP90-106-FLMP90-16-M16MP90-16-M20MP90-20-M20MP90-25-M25MP90-28-M25MP90-32-M32MP90-40-M40MP90-50-M50MP90-80-FLMPC-12-M16MPC-12-PG9MPC-16-050MPC-16-M16MPC-16-M20MPC-16-PG11MPC-16-PG13MPC-20-050MPC-20-M20MPC-20-PG16MPC-25-075MPC-25-M25MPC-25-PG21MPC-30-PG29MPC-32-100MPC-32-M32MPC-32-PG29MPC-40-125MPC-40-M40MPC-40-PG36MPC45-16-M20MPC45-20-M20MPC45-25-M25MPC45-32-M32MPC-50-M50MPC-50-PG42MPC-63-M63MPC-63-PG48MPC90-16-M16MPC90-16-M20MPC90-16-PG11MPC90-16-PG13
39383839383839383839383839383839383838383838382626262626262626262626262626262626262628282828282828282828282828262626262626267770707070707070707077777070707070707070777172747174727274717274717272747172747472737373737472747273737373 101
102
ww
w.fl
exic
on.u
k.co
m
Part Number Page Part Number Page
PART INDEX
SW16SW20SW25SW32SW40SW50SW63SWPG11SWPG13SWPG16SWPG21SWPG29SWPG36SWPG42SWPG48SWPG7SWPG9T12X12X12T16X16X16T20X20X20T25X25X25TS12X12X12TS16X16X12TS20X25X20TS25X20X25
79797979797979797979797979797979797070707070707070
MPC90-20-M20MPC90-20-PG16MPC90-25-M25MPC90-25-PG21MPC90-32-M32MPC90-32-PG29MPC90-40-M40MPC90-40-PG36MPS-106-FLMPS-12-M16MPS-16-M16MPS-16-M20MPS-20-M20MPS-25-M25MPS-28-M25MPS-32-M32MPS-40-M40MPS-50-M50MPS-80-FLMPS90-106-FLMPS90-16-M16MPS90-16-M20MPS90-20-M20MPS90-25-M25MPS90-28-M25MPS90-32-M32MPS90-40-M40MPS90-50-M50MPS90-80-FLMSL-21-M20MSL-21-M20-PPMSL-26-M25MSL-26-M25-PPPG11-NPG13-NPG16-NPG21-NPG29-NPG36-NPG42-NPG48-NPG7-NPG9-NRTPF20RTPF25RTPF32S-M16S-M20S-M25S-M32S-M40S-M50S-M63SP-M12SP-M16SP-M20SP-M25SP-M32SP-PG11SP-PG13SP-PG16SP-PG21SP-PG29SP-PG7SP-PG9SP-R16SP-R21SP-R28SP-R34SPW16SPW20SPW25SPW32SS-M16SS-M20SS-M25SS-M32SS-M40 SS-M50 SS-M63 SSU10-10MSSU10-25MSSU10-M12-MSSU10-M12-SSSU12-10MSSU12-25MSSU12-M16-MSSU12-M16-SSSU16-10MSSU16-25MSSU16-M16-MSSU16-M16-SSSU20-10MSSU20-25MSSU20-M20-MSSU20-M20-SSSU25-10MSSU25-25MSSU25-M25-MSSU25-M25-SSSU32-10MSSU32-25MSSU32-M32-MSSU32-M32-SSSU40-10MSSU40-M40-M SSU50-10MSSU50-M50-M SSU63-10MSSU63-M63-MST16ST20ST25ST32SW12
73737373737373737770707070707070707077777070707070707070777171717178787878787878787878818181787878787878787878787878787878787878786666666679797979787878787878782020202120202021202020212020202120202021202020212020202020208181818179
NOTES
NOTES
top related