fiberlink rf-over-fiber series · signal transmission over optical-fiber at the highest quality...
Post on 11-Oct-2020
1 Views
Preview:
TRANSCRIPT
Secure and stable RF signal distribution over long distances becomes more and more relevant in satellitecommunication, broadcast and broadband architectures. The RF-over-Fiber optical transmission systemFiberLink represents professional, flexible and reliable solutions for transmitting L-Band and/or IF signals viaoptical-fiber. It is especially developed for the satellite communications-, broadband- and broadcast industry andexcellently suited for integrations in Teleports, Up- and downlink stations, broadcasting operations as well ascable- and IPTV facilities. The Fiberlink series offers excellent performance as well as secure and accuratesignal transmission over optical-fiber at the highest quality level.
The FiberLink series features 3 different variants - EcoLink, ProLink and RedLink -.The flexible EcoLink system is a straight forward RF-over-Fiber solution for IF and L-Band optical transmissionwhile LNB-supply and gain adjustment is optionally available. The more advanced and professional systemsProLink & RedLink both offer various additional features like Laser/Link/RF-power monitoring, manual andautomatic gain control (MGC/AGC), LNB-supply, remote access and configuration while the RedLink features1:1redundancy (hot-swappable) for both the TX/RX (laser/link) so to assure secure and stable signal transmissi-on at any time.
FiberLink RF-over-Fiber seriesEcoLink, ProLink & RedLink optical transmission systems
Fib
erL
ink R
F-o
ver-
Fib
er
seri
es
GENERAL
EcoLink Products ProLink Products
Ø
Ø
Ø
Ø
Ø
Ø
Ø
FTC2S/FRC2S
FTRC16S
FTX714EL
FRX714EL
FTX2012EL
FTX2112EL
FRX2012EL
1RU/19" TX/RX -chassis
3RU/19" TX/RX-chassis
Optical TX module, IF
Optical RX module, IF
Optical TX-module, L-Band
Optical TX-module, L-Band
Optical RX module, L-Band
(with Gain adjustment and LNP-supply)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
FLC102
FLC316
FLTXI-S
FLRXI-S
FLTXL-S
FLRXL-S
FLCR101
FLCR416
FLTXI-R
FLRXI-R
FLTXL-R
FLRXL-R
1RU/19" TX/RX chassis
3RU/19" TX/RX chassis
Optical TX module, IF
Optical RX module, IF
Optical TX-module, L-Band
Optical RX module, L-Band
1RU/19" TX/RX redundant chassis
4RU/19" TX/RX redundant chassis
Optical 1:1 red. TX module, IF
Optical 1:1 red. RX module, IF
Optical 1:1 red. TX-module, L-Band
Optical 1:1 red. RX module, L-Band
RedLink Products (1:1 redundant system)
Made
inGermany
The EcoLink RF-over-Fiber system offers various mechanical options in 1 & 3RU/19" design providing costeffective, space saving and straight forward optical distribution of IF and L-Band signals. The EcoLink chasssiscan be equipped either with 2 optical TX/RX modules (1RU variant) or up to 16 TX/RX modules (3RU variant)while the chassis are equipped with 1:1 redundant power-supply (hot-swappable) and status LED´s.
Eco
Lin
k R
F-o
ver-
Fib
er
TX
/RX
Ch
assisGENERAL
FTC2S/FRC2S 1RU CHASSIS FTRC16S CHASSIS
FEATURES FEATURES
SPECIFICATIONS
EcoLink TX/RX ChassisEcoLink TX/RX chassis FTC2S/FRC2S & FTRC16S
SPECIFICATIONS
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Modular 3RU/19" opticial transmission chassis
Modular IF/L-Band transmission
Up to 16 RF signals over fiber transmission
Insertion of max. 16 EcoLink TX or RX modules
Features 1:1 power-supply redundancy (hot-swapp.)
Front side LED´s indicating power-supply status
(per chassis)
(1:1 redundant, hot-swapp.)
(pot. free)
Mechanical dimension:
Red. Power-supply:
Power consumption:
1:1 psu alarm connector:
Module slots:
Environmental condit.:
RoHS
3RU/19", 295mm deep
85...230V, 50/60Hz
<60W
DB9-female
16
ETS300019, Part 1-3,Class 3.1
: Compliant
(for TX/RX modules)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Space saving 1RU/19" opticial transmission chassis
Compact IF & L-Band transmission
Up to 2 RF signals over fiber transmission
Insertion of max. 2 EcoLink TX or RX modules
Features 1:1 power-supply redundancy (hot-swapp.)
Front side LED´s indicating power-supply status
(per chassis)
Mechanical dimension:
Power-supply:
Power consumption:
1:1 psu alarm connector:
Module slots:
Environmental condit.:
RoHS:
1RU/19", 260mm deep
85...230V, 50/60Hz
<15W
DB9-female
2 (for TX/RX modules)
ETS300019, Part 1-3,Class 3.1
Compliant
(1:1 redundant, hot-swapp.)
(potent. free)
Made
inGermany
Eco
Lin
k R
F-o
ver-
Fib
er
op
tical m
od
ule
s
TECHNICAL SPECIFICATIONS
EcoLink Optical modulesEcoLink optical modules FTX/FRX714EL, FTX/FRX2xxxEL
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range
RF Input connector:
RF Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Input noise floor:
Spurious free dyn. range:
Optical Output connectors:
Operating wavelength:
Optical power:
RoHS:
: 10...200MHz
50Ohm SMA (f) or75Ohm BNC(f)
0dBm max.
1,0dB
18dB
< -56dBc
> -133dBm/Hz
109dB/Hz
E2000 or SC/APC*
1310nm
2dBm
Compliant
±
( VSWR: 1:1.29)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
FRX714EL optical receiver IF
FTX714EL optical transmitter IF
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range
RF Input connector:
RF Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Input noise floor:
Spurious free dyn. range:
Optical Output connectors:
Operating wavelength:
Optical power:
*Gain adjust:
*LNB-supply:
RoHS:
: 950...2150MHz
50Ohm SMA (f) or75Ohm F(f)
0dBm max.
1,0dB
16dB
< -60dBc
> -133dBm/Hz
109dB/Hz
E2000 or SC/APC*
1310nm
2dBm
-10...+20dB
13/15/18V, 22kHz,400mA
Compliant
±
( VSWR: 1:1.38)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
FRX2012EL optical receiver L-Band
FTX2012EL/FTX2112EL* optical transmitters L-Band
FTX/FRX714EL MODULES (IF-range) FTX/FRX2xxxEL MODULES (L-Band range)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range:
Optical Input connectors:
Operating wavelength:
Optical Input level:
RF Output connectors:
Frequency response:
Return loss:
IMA3 @ -10dBm
Noise floor:
Spurious free dyn. range:
RF output power:
10...200MHz
E 2000 or SC/APC*
1310 - 1560nm
+10dBm
50Ohm SMA(f) or75Ohm BNC(f)
1,0dB
18dB
: < -50dBc
> -133dBm/Hz
109dB/Hz
+10dBm
*upon request
±
( VSWR: 1:1.29)
( C/N: 57dB min. @36MHz)
!
!
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range:
Optical Input connectors:
Operating wavelength:
Optical Input level:
RF Output connectors:
Frequency response:
Return loss:
IMA3 @ -10dBm
Noise floor:
Spurious free dyn. range:
RF output power:
950...2150MHz
E 2000 or SC/APC*
1310 - 1550nm
+10dBm
50Ohm SMA(f) or75Ohm F(f)
1,0dB
16dB
: < -56dBc
> -133dBm/Hz
109dB/Hz
+10dBm
*upon request
±
( VSWR: 1:1.38)
( C/N: 57dB min. @36MHz)
!
!
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
Made
inGermany
The ProLink RF-over-Fiber system offers mechanical options in 1 & 3RU/19" design for flexible and high qualityoptical distribution of up to 16 IF or L-Band signals. The ProLink chasssis can be equipped either with 2 optical TX/RXmodules (1RU variant) or up to 16 TX/RX modules (3RU variant). Furthermore the ProLink system offers variousfeatures like front side 5,7" touch screen LC-Display for local control, remote interfaces for remote acces andconfiguration, Laser, Link and RF power monitoring, gain adjustment and LNB-supply.
This professional fiber optic transmission system is perfectly suited for Satellite communications and broadbandinfrastructurs where satellite signals have to be transmitted over long distances while perfect RF performance anderror free signal distribution is assured.
The ProLink chassis aredesigned to allow mixed configurations for insertion of IF and/or L-Band TX/RX modules within the same chassist.
GENERAL
FLC102 1RU CHASSIS FLC316 3RU CHASSIS
FEATURES FEATURES
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
1RU/19" opticial transmission chassis
Compact, professional and secure signal transmission
Up to 2 RF signals over fiber transmission
Insertion of max. 2 ProLink TX/RX modules
1:1 power-supply redundancy (hot-swap)
Front side LC-Display & keypads for local configuration
Remote access and configuration via Web-Interface, SNMP
LED´s displaying laser, link, psu & access status
1RU/19", 260mm deep
<10W
DB9-female
2 (for TX/RX modules)
ETS300019, Part 1-3,Class 3.1
(Mixed possible)
(1:1 redundant, hot-swapp.)
Mechanical dimension:
Power consumption:
1:1 psu alarm connector:
Optical module slots:
Environmental condit.:
Power-supply:
RoHS:
85...230V, 50/60Hz
Compliant
(potential free)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
3RU/19" modular opticial transmission chassis
Modular, professional and secure signal transmission
Up to 16 RF signals over fiber transmission
Insertion of max. 16 ProLink TX/RX modules
1:1 power-supply redundancy (hot-swap)
Front side 5,7" touchscreen for local configuration
Remote configuration via Web-Interface, SNMP
LED´s displaying laser, link, psu & access status
3RU/19". 295mm deep
85...230V, 50/60Hz
<60W
DB9-female
16
ETS300019, Part 1-3,Class 3
(Mixed pos.)
(1:1 redundant, hot-swapp.)
(potent. free)
(for TX/RX modules)
Mechanical dimension:
Red. Power-supply:
Power consumption:
1:1 psu alarm connector:
Optical module slots:
Environmental condit.:
RoHS: Compliant
SPECIFICATIONS
ProLink TX/RX ChassisProLink TX/RX chassis FLC102 & FLC316
Pro
Lin
k R
F-o
ver-
Fib
er
TX
/RX
Ch
assis
SPECIFICATIONS
Made
inGermany
TECHNICAL SPECIFICATIONS
ProLink Optical modulesProLink optical modules FLTXI-S/FLRXI-S, FLTXL-S/FLRXL-S
Pro
Lin
k R
F-o
ver-
Fib
er
op
tical m
od
ule
s
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range
RF Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Input noise floor:
Spurious free dyn. range:
Operating wavelength:
Optical power / Connectors:
RF connectors:
Port matching:
Gain adjustment
RF power measurement:
: 10...200MHz
0dBm max.
0,5dB typ./ 1,0dB max.
18dB
< -56dBc
> -133dBm/Hz
109dB/Hz
1310nm
2dBm / E2000 or SC/APC*
50Ohm SMA (f) or75Ohm BNC(f)
all ports 18dB
MGC/AGC -15...+15dB
60dB
± ±
( VSWR: 1:1.29)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
FLRXI-S optical receiver IF
FLTXI-S optical transmitter IF
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range
RF Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Input noise floor:
Spurious free dyn. range:
Operating wavelength:
Optical power / Connectors:
RF connectors:
Port matching:
Gain adjustment:
RF power measurement:
LNB supply:
: 950...2150MHZ
0dBm max.
0,5dB typ./ 1,0dB max.
16dB
< -60dBc
> -133dBm/Hz
109dB/Hz
1310nm
2dBm / E2000 or SC/APC*
50Ohm SMA(f)or 75Ohm F(f)
all ports 16dB
MGC/AGC -15...+15dB
70dB
± ±
( VSWR: 1:1.38)
( C/N: 57dB min. @36MHz)
!
!
*upon request
13/15/18V, 22kHz,400mA
Compliant
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS:
FLRXL-S optical receiver L-Band
FLTXL-S optical transmitter L-Band
FLTXI-S/FLRXI-S MODULES (IF) FLTXL-S/FLRXL-S MODULES (L-Band)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range:
Optical Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Noise floor:
Spurious free dyn. range:
Operating wavelength:
RF / Optical connectors:
Gain adjustment
RF output power:
RF power measurement:
10...200MHz
+10dBm
0,5dB typ./ 1,0dB max.
18dB
< -56dBc
> -133dBm/Hz
109dB/Hz
1310 - 1560nm
50Ohm SMA (f) or75Ohm BNC(f) /E 2000 or SC/APC*
MGC/AGC -15...+15dB
+10dBm
60dB
± ±
( VSWR: 1:1.29)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range:
Optical Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Noise floor:
Spurious free dyn. range:
Operating wavelength:
RF / Optical connectors:
Gain adjustment
RF output power:
RF power measurement:
950...2150MHz
+10dBm
0,5dB typ./ 1,0dB max.
16dB
< -60dBc
> -133dBm/Hz
109dB/Hz
1310 - 1560nm
50Ohm SMA(f)or 75Ohm F(f)E 2000 or SC/APC*
MGC/AGC -15...+15dB
+10dBm
70dB
± ±
( VSWR: 1:1.38)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
Made
inGermany
RF-Out
Opt.-I
n
FLTXLFLRXL
RF-In
Op
t.-O
ut
RF-Out
Op
t.-I
n
FLTXLFLTXI FLTXLFLRXI
RF-In
FLTXLFLTXL
The RedLink RF-over-Fiber redundant chassis FLCR101 (1RU/19") and FLCR416 (4RU/19") allow flexible, high quality andmost secure optical distribution of max. 16 L-Band and/or IF signals in 1:1 redundant operation. The FLCR101 chassis can beequipped with 2 optical modules (TX/RX) while one is actively operating and 1 hot-standby so to assure a 1:1 opticaltransmission redundancy. The FLCR416 can be equipped with 32 optical modules (TX/RX) while 16 are actively operating and16 hot-standby assuring a 1:1 optical transmission redundancy. The units are designed to allow mixed configurations so toinsert IF and/or L-Band TX-, and/or RX modules within the same chassis. The chassis is furthermore equipped with 16 RFinput and outputs, acting eihter as input or output interfaces, as per the individual configuration. The redundancy switching canbe realized manually via the front panel touchscreen but also remotely via the Ethernet-Interface (http/SNMP). Furthermore thesystem features an automatic redundancy switching as per preconfigured adjustments. Once an error for an TX or RX moduleoccurs an error message can be sent out by SNMP and the activation of the hot-standby redundant module will be done asconfigured, manually or automatically. The redundant RedLink system features a front side 8" LCD touch screen as well asremote interfaces for remote acces and configuration. Besides this the Redlink features Laser, Link and RF power monitoring,gain adjustment as well as LNB-supply.
GENERAL
FLCR416 1:1 REDUNDANT CHASSIS
RedLink Redundant TX/RX ChassisRedLink redundant TX/RX chassis FLCR101 & FLCR416
Red
Lin
k r
ed
un
dan
t T
X/R
X C
hassis
FLCR101 1:1 REDUNDANT CHASSIS
FEATURES FEATURESØ
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
1RU/19" opticial transmission chassis
Pofessional; stable and secure signal transmission
1 active RF signal over fiber transmission
Insertion of max. 2 TX/RX modules (1 active/1 hot-standby)
Supports mixed configurations for IF/ L-Band & TX/RX
1:1 TX/RX redundancy (hot-swappable)
Manual and automatic redundancy switching
1:1 power-supply redundancy (hot-swappable)
Front side LC-Display & keypads for local configuration
Remote access and configuration via Web-Interface, SNMP
LED´s displaying laser, link, psu & access status
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
4RU/19" 1:1 redundant opticial TX/RX chassis
Pofessional, stable and secure signal transmission
Up to 16 active RF signals over fiber transmission
Insertion of max. 32 TX/RX modules
Supports mixed configurations for IF/L-Band & TX/RX
1:1 TX/RX redundancy (hot-swappable)
Manual and automatic redundancy switching
1:1 power-supply redundancy (hot-swappable)
Front side 8" LCD color touchscreen
Remote configuration via Web-Interface, SNMP
LED´s displaying laser, link, psu & access status
(16 active/16 hot-standby)
SPECIFICATIONS SPECIFICATIONS
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Mechanical dimension:
Power-supply:
Power consumption:
Frequency-ranges:
RF Inputs/Outputs:
RF-Connectors
1:1 psu alarm connector:
2 module slots:
RoHS:
1RU/19", 260mm depep
85...230V, 50/60Hz (1:1 redundant)
<10W
IF 10...200MHz / L-Band 950...2.15GHz
2
: 50Ohm SMA(f) or 75Ohm F(f)
DB9-female (potential free)
1 active/hot-standby TX/RX
Compliant
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Mechanical dimension:
Power-supply:
Power consumption:
Frequency-ranges:
RF Inputs/Outputs:
RF-Connectors:
1:1 psu alarm connector:
32 module slots:
RoHS:
4RU/19", 295mm deep
85...230V, 50/60Hz (1:1 redundant)
<100W
IF 10...200MHz and/orL-Band 950...2.15GHz
16
50Ohm SMA(f) or 75Ohm F(f)
DB9-female (potential free)
1...16 active/hot-standby TX/RX
Compliant
Made
inGermany
RedLink Redundant optical modulesRedLink redundant optical modules FLTXI-R/FLRXI-R, FLTXL-R/FLRXL-R
Red
Lin
k r
ed
un
dan
t o
pti
cal m
od
ule
s
TECHNICAL SPECIFICATIONS
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range
RF Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Input noise floor:
Spurious free dyn. range:
Operating wavelength:
Optical power / Connectors:
RF connectors:
Gain adjustment :
RF power measurement:
Status LED´s:
: 10...200MHz
0dBm max.
0,5dB typ. / 1,0dB max.
18dB
< -56dBc
> -133dBm/Hz
109dB/Hz
1310nm
2dBm / E2000 or SC/APC*
50Ohm SMA (f) or75Ohm BNC(f)
MGC/AGC -10...+10dB
60dB
OK, Fail
± ±
( VSWR: 1:1.29)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
FLRXI-R optical redundant Receiver, IF
FLTXI-R optical redundant Transmitter, IF
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range
RF Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Input noise floor:
Spurious free dyn. range:
Operating wavelength:
Optical power / Connectors:
RF connectors:
Gain adjustment:
RF power ameasurement:
Status LED´s:
LNB supply:
: 950...2150MHz
0dBm max.
0,5dB typ./ 1,0dB max.
16dB
< -60dBc
> -133dBm/Hz
109dB/Hz
1 1310nm
2dBm / E2000 or SC/APC*
50Ohm SMA (f)or 75Ohm F(f)
MGC/AGC -10...+10dB
70dB
OK, Fail; Stand-by
13V, 18V & 22kHz,400mA
± ±
( VSWR: 1:1.38)
( C/N: 57dB min. @36MHz)
!
!
*upon request
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS:
FLRXL-R optical redundant Receiver, L-Band
FLTXL-R optical redundant Transmitter L-Band
FLTXI-R/FLRXI-R MODULES (IF) FLTXL-R/FLRXL-R MODULES (L-Band)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range:
Optical Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Noise floor:
Spurious free dyn. range:
Operating wavelength:
RF output power:
RF / Optical connectors:
Gain adjustment:
RF power measurement:
Status LED´s:
950...2150MHz
+10dBm
0,5dB typ./ 1,0dB max.
16dB
< -60dBc
> -133dBm/Hz
109dB/Hz
1310 - 1560nm
+10dBm
50Ohm SMA(f)or 75Ohm F(f)E 2000 or SC/APC*
MGC/AGC -10...+10dB
70dB
OK, Fail; Stand-by
± ±
( VSWR: 1:1.38)
( C/N: 57dB min. @36MHz)
!
!
(*upon request)
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range:
Optical Input level:
Frequency response:
Return loss:
IMA3 @ -10dBm:
Noise floor:
Spurious free dyn. range:
Operating wavelength:
RF output power:
RF / Optical connectors:
Gain adjustment:
RF power measurement:
Status LED´s:
10...200MHz
0dBm max.
0,5dB typ. / 1,0dB max.
18dB
< -56dBc
> -133dBm/Hz
109dB/Hz
1310 - 1560nm
+10dBm
50Ohm SMA(f)or 75Ohm BNC(f)E 2000 or SC/APC*
MGC/AGC -10...+10dB
60dB
OK, Fail; Stand-by
± ±
( VSWR: 1:1.29)
( C/N: 57dB min. @36MHz)
!
!
Operating temperature:
Storage temperature:
Humidity:
0...45°C
-20°C...70°C
90% non-condensing
RoHS: Compliant
Made
inGermany
Fib
erL
ink R
F-o
ver-
Fib
er
seri
es
FEATURE TABLE
APPLICATION EXAMPLE
The FiberLink RF-over-Fiber series features various possibilitis for efficient and high performance opticaldistribution of IF and L-Band signals. This system is ideally suited for the Satellite, broadcast and broadbandcommunications industry and applicable for Teleports, Up- and downlink stations, broadcasting operations aswell as cable- and IPTV RF-distribution infrastructures.
GENERAL
FiberLink RF-over-Fiber seriesEcoLink, ProLink & RedLink optical transmission systems
Made
inGermany
© 01/2014 RF-Design (Rev.04) Subject to modifications
RF-Design | Marienburger Str. 3 | 64653 Lorsch | Germany
HQ / R&D / Manufacturing: Tel: +49 (0) 6251 9389 85 | Fax: +49 (0) 6251 9389 87 | www.rf-design-online.de | eMail: info@rf-design-online.deSales/Marketing/Projects: Tel: +49 (0) 361 7896 2340 | Mob.: +49 (0) 175 4379 860 | www.rf-design-online.de | eMail: o.vogel@rf-design-online.de
top related