fanuc p 145 datasheet - robots.com · painting automation ˜ fanuc p-145 ˚ ˛ 370 w. fairground...
Post on 09-Aug-2021
7 Views
Preview:
TRANSCRIPT
Robot Information
Robot Specifications
Axes:.............6
Payload:........7 kg
H-Reach:.......2542 mm
Repeatability: ±0.5 mm
Robot Mass: 500 kg
Structure: ..... Articulated
Mounting: .....Floor
Robot Motion Speed
J1...... 103°/s (1.8 rad/s)
J2...... 140°/s (2.44 rad/s)
J3...... 125°/s (2.18 rad/s)
J4...... 395°/s (6.89 rad/s)
J5...... 545°/s (9.51 rad/s)
J6...... 666°/s (11.62 rad/s)
Robot Motion Range
Robot Controllers
J1...... ±195°
J2...... ±140°
J3...... ±120°
J4...... ±540°
J5...... ±540°
J6...... ±540°
R-J2 �
R-J3 �
R-J3iB �
Robot Applications
Bonding / Sealing �
Painting Automation �
FANUC P-145
� www.robots.com � 370 W. Fairground St. Marion, OH 43302 � 1-740-383-8383
The FANUC P-145 painting robot features a large payload capacity and a purge system that is approved for operation in hazardous environments. Designed to decrease the cycle time, the P-145 offers high acceleration and a hollow wrist with through-arm hose routing. Maintenance requirements are reduced by the use of a integral drive component with sealed lubrication.
The tool tip speed of the FANUC P-145 painting robot is 1,500 mm/sec. Advanced motion software provides a constant tip speed that improves the uniformity and appearance of the paint finish.
For more information about the FANUC P-145,contact a Robotworx representative today at 740-251-4312.
top related