fanuc p 120 datasheet - robots

Robot Information

Robot Specifications

Axes:.............6

Payload:........5 kg

H-Reach:.......2409 mm

Repeatability: ±0.5 mm

Robot Mass: 460 kg

Structure: .....Articulated

Mounting: .....Floor

Robot Motion Speed

J1...... 105°/s (1.83 rad/s)

J2...... 143°/s (2.5 rad/s)

J3...... 125°/s (2.18 rad/s)

J4...... 400°/s (6.98 rad/s)

J5...... 600°/s (10.47 rad/s)

J6...... 700°/s (12.22 rad/s)

Robot Motion Range

Robot Controllers

J1...... ±195°

J2...... ±140°

J3...... ±120°

J4...... ±540°

J5...... ±540°

J6...... ±540°

R-J2 �

R-J3 �

Robot Applications

Coating �

Painting Automation �

FANUC P-120

� www.robots.com � 370 W. Fairground St. Marion, OH 43302 � 1-740-383-8383

The FANUC P-120 is a high-quality painting and coating robot with precision control and fast axis speeds. Production costs are lowered as a result of reduced cycle times and minimized paint waste. Featuring six axes of motion and a large working envelope, the FANUC P-120 has a payload capacity large enough for a wide range of spraying applications.

The FANUC P-120 is equipped with advanced motion software that communicates information to improve the paint finish. The wrist is designed to allow for mounting on either side of the part for maximum flexibility. The FANUC painting P-120 robot is approved for operation in hazardous environments such as Class I and II, Division I, and Groups C, D, E, F, and G. The P-120 can use the R-J2 or the R-J3 FANUC controller.

For more information about the FANUC P-120,contact a Robotworx representative today at 740-251-4312.