exalt ex-s series presentation final 121908 v7-2
Post on 24-Oct-2014
84 Views
Preview:
TRANSCRIPT
©2007 Exalt Communications Inc. All Rights Reserved. www.exaltcom.comProprietary and Confidential
EX-s Series FCC 6 – 40 GHzSplit-Mount
Point-to-Point Microwave Radios
Product OverviewDecember 2008
page 2 Proprietary and Confidential
Agenda
> About Exalt Communications
> EX-s Series Overview
> Feature & Benefit Overview
> Product Detail
> Path Planning Tools
> Management
page 3 Proprietary and Confidential
About Exalt
> Founded by industry veterans in 2004
> Industry-leading radio products for diverse markets and applications
> Focused exclusively on microwave backhaul and connectivity
- Licensed & unlicensed point-to-point microwave radio systems
- TDD and FDD- Native TDM & native Ethernet- Carrier-class performance and
availability- Scalability & flexibility
page 4 Proprietary and Confidential
Why Exalt
>Rapid pace of innovation, supporting native TDM and native Ethernet in every system
>Builds on a flexible, application-independent platform to offer the broadest portfolio of license and license-exempt products in the market
>Carrier-class TDD brings licensed band performance and availability to license-exempt bands
©2007 Exalt Communications Inc. All Rights Reserved. www.exaltcom.comProprietary and Confidential
Product Overview
page 6 Proprietary and Confidential
Product Portfolioi-Series
(all-indoor)s-Series
(split mount)r-Series
(all-outdoor)
6 – 40 GHz2.4, 4.9, 5, 6 GHz 6 – 40 GHz4.9, 5 GHz
page 7 Proprietary and Confidential
11, 18 and 23 GHz FCC Licensed Portfolio
Split-mount, Carrier-class Radio Systems with Native TDM, Native Ethernet and Upgradeable Capacity
EX-11s, EX-18s & EX-23s- 11, 18 and 23 GHz FCC Licensed Bands- 45 Mbps (11 GHz) or 15 Mbps (18 and 23 GHz) full-duplex
Ethernet base configuration with 0xT1/E1- Software upgradeable to 100 Mbps full-duplex and
4xT1/E1- 1 RU rack mount IDU- Direct mount or remote mount ODU
EX-11s-16, EX-18s-16 & EX-23s-16- 45 Mbps (11 GHz) or 15 Mbps (18 and 23 GHz) full-duplex
Ethernet base configuration with 0xT1/E1- Software upgradeable to 100 Mbps and up to 16xT1/E1- 1.5 RU rack-mount IDU
EX-ns-16
EX-ns
EX-ns ODU
page 8 Proprietary and Confidential
11, 18 and 23 GHz FCC Licensed Portfolio
Split-mount, Carrier-class Radio Systems with Native TDM, Native Ethernet and Upgradeable Capacity
EX-11s-DS3-GigE- 11 GHz FCC Licensed Bands- 45 Mbps full-duplex Ethernet base configuration with
0xT1/E1- Software upgradeable up to 1xDS3, 16xT1/E1, or 165
Mbps full-duplex 1.5 RU rack mount IDU- Direct mount or remote mount ODU
EX-18s-DS3-GigE, EX-23s-DS3-GigE- 45 Mbps full-duplex Ethernet base configuration with
0xT1/E1- Software upgradeable up to 1xDS3, 16xT1/E1, or 165
Mbps full-duplex- 1.5 RU rack-mount IDU
EX-ns ODU
EX-ns-DS3-GigE
page 9 Proprietary and Confidential
Feature & Benefit Overview
page 10 Proprietary and Confidential
Native TDM and Native Ethernet
Variable Allocation
Native Ethernet
Native TDM
Feature
Zero latency introduction ensures the highest performance IP transport over the radio link
Benefit
Protects value of investment by supporting both current and future traffic allocation splits between TDM and Ethernet
Available channel bandwidth carries user traffic – not overhead – thus conserving spectrum
When T1/E1 ports are added, TDM throughput is traded bit-for-bit for Ethernet throughput and vice versa, so rated throughput always equals user-available throughput
Delivers low and consistent latency performance regardless of IP traffic behavior, including bursts
page 11 Proprietary and Confidential
Native TDM
TDM to IP Protocol
Conversion
IP packets
Layer 2 Switch
T1
T1
T1
T1
12 Mbps aggregate TDM
throughput
24 Mbps aggregate encapsulated TDM
throughput
IP Radio20 Mbps
1 - 8 Mbps aggregate Ethernet throughput
IP packets of varying size
Latency hit up to 50 ms
Layer 2 Switch
IP Radio20 Mbps
Layer 2 Switch
Overhead hit of 50% - 200%
Poor latency performance
Up to 3x more required capacity per T1 than native
Ethernet traffic contends with TDM
traffic for shared capacity
Non-Native
Layer 2 Switch
T1
T1
T1
T1
12 Mbps aggregate TDM
throughput
1 - 8 Mbps aggregate Ethernet throughput
IP packets of varying sizeLayer 2 Switch
ExaltRadio
20 Mbps
Layer 2 Switch
Separate native TDM and native Ethernet streams
with no contention
Radio required to support only native
capacity, not overhead
Exalt Native
TDM fra
mesTD
M fr
ames
page 12 Proprietary and Confidential
Flexibility and Ease of Use
Enables the same IDU SKU to be used for all 11, 18 and 23 GHz licensed bands with plug-and play ODU auto-configuration, reducing CAPEX associated with sparing
Reduces time associated with frequency transition through ODU-only swap
Reduces training burden: all IDUs are the same, regardless of frequency
Common split-mount IDU 11, 18, 23 GHz
Provides a hardware upgrade path to a GigE IDU without replacing ODU
Upgrade path to GigE
Provides in-band and out-of-band flexibility with multiple management options, including HTTP, CLI/Telnet, Serial Console, and SNMP v1,2c, and v3
Management flexibility
Allows selection of desired channel bandwidth or modulation entirely via software, providing flexibility vs. hardware-based configuration options
Selectable occupied bandwidth and
modulation
Feature Benefit
page 13 Proprietary and Confidential
Configuration SimplicityChannel bandwidth and
modulation options enabled according to base
model + upgrade key options
TDM channels enabled according upgrade key
option and channel bandwidth/modulation
selections
page 14 Proprietary and Confidential
Support
Allows instant access to documentation within the radio. Installation and Management manual is always up-to-date with the latest release of software
Embedded manual
Provides two-year warranty with registration (one-year otherwise)
Offers extended warranty up to 5 years and advanced replacement with 24/7 phone support up to 5 years
Offers field installation supervision and private/customized training
Exalt Customer Care
Feature Benefit
page 15 Proprietary and Confidential
High Security
AES 128/256-bit Encryption
(optional)
SNMPv3
Feature Benefit
Secure mobile voice and data traffic with the most secure standards-based encryption available with no added latency or throughput degradation
Hardware-based approach ensures that the process of encryption does not affect capacity (software-based encryption can reduce throughput by as much as 50%)
Ensures the protection of potentially sensitive network monitoring and management traffic through secure user authentication and message encryption
Addresses known security holes with v1 and v2c
page 16 Proprietary and Confidential
Product Detail
page 17 Proprietary and Confidential
EX-s Series 4-100F IDU (E00001F)
IF N-type Connector to
ODU
Console port
Alarmsport4xT1/E1
software license key enabled
2x 10/100BaseT
RSL test points
±20 - 60VDC
Grounding
Future Status LEDs & remote status switch
1 RU
> AC Adapter with power cord> Accessory kit (rack mount hardware, DC power connector, and grounding hardware)> Quick start guide> Product registration card
Included with IDU:
page 18 Proprietary and Confidential
EX-s Series 16-100F (E00011F)
IF N-type Connector to ODU
±20 - 60VDC16xT1/E1 software license key enabled
Status LEDs & remote status switch
RSL test points2x 10/100BaseT
FutureAlarms
port
Console port
1.5 RU
Default configuration dip switch
> AC Adapter with power cord> Accessory kit (rack mount hardware, DC power connector, and grounding hardware)> Quick start guide> Product registration card
Included with IDU:
page 19 Proprietary and Confidential
EX-s Series DS3-1000F (Release Q1’09)
IF N-type Connector to ODU
Dual ±20-60VDC
16xT1/E1 software license key enabled
Status LEDs & remote status switch
1xDS3 software license key enabled
2x 10/100/1000BaseTConsole port
1x 1000BaseT/X SFP
Alarms portRSL test point
> AC Adapter with power cord> Accessory kit (rack mount hardware, DC power connector, and grounding hardware)> Quick start guide> Product registration card
Included with IDU:
1.5 RU
page 20 Proprietary and Confidential
EX-s Series ODU (11, 23, and 18 GHz)
Waveguide(Rectangular)
11 GHz WR-7518 GHz WR-4223 GHz WR-42
Mounting clips
Grounding
RSL test point
IF N-type connector
to IDU
B4 High
B3 High
B2 High
B1 High
B3 High
B4 High
B3 High
B2 High
B1 High
Sub-band
B4 Low
B3 Low
B2 Low
B1 Low
B3 Low
B4 Low
B3 Low
B2 Low
B1 Low
Sub-band
21490-21.82022.690-23020
21.780-22.11022.980-23.310
21.200-21.53022.400-22.73021.200-23.60023
11.035-11.21511.525-11.700
22.070-22.400
17.700-18.140
10.915-11.095
10.795-10.975
10.675-10855
Sub-band Low (band edges in GHz)
17.700-19.700
10.700-11.700
Freq Range (GHz)
23.270-23.600
19.260-19.700
11.405-11.585
11.285-11.465
11.165-11.345
Sub-band High (band edges in GHz)
Band (GHz)
11
18
page 21 Proprietary and Confidential
100BaseT to GigE IDU Upgrade Example
Exalt 16-100F IDU10/100BaseT+4-16xT1/E1
Exalt 11GHz ODU
EX-11s-16
Exalt DS3-1000F IDUGigE+1xDS3+16xT1/E1
(Q1’09)
45 Mbps FD + 0xT1/E1 45 Mbps FD + 0xT1/E1
100 Mbps FD +16xT1/E1 95 Mbps FD +1xDS3+16xT1/E1(165 Mbps FD)
Software Upgrade
Path
Software Upgrade
Path
IDU Upgrade
Path
page 22 Proprietary and Confidential
EX-s Series Direct-coupled Antennas (3rd party Exalt-specific)
Rear view of 1ft direct-coupled 23GHz antenna
ODU mounting
clips
ODU mounting clip detail
Side view with ODU installed
page 23 Proprietary and Confidential
EX-s Series Remote Mount (3rd party Exalt-specific)
Remote mountODU side
Fully assembled remote mountwith installed
ODU
page 24 Proprietary and Confidential
EX-s Series Hot Standby Coupler (3rd party Exalt-specific)
Fully assembled and installed on direct-coupled antenna
Hot Standby Couplerwith one ODU installed on a remote mount
Hot Standby Coupler Hot Standby Coupler installed on Remote Mount
page 25 Proprietary and Confidential
EX-11s Capacity and Upgrade Paths
EX-11s-16
EX-18s-16EX-23s-16
EX-18sEX-23s
EX-11s
Maximum ConfigurationBase ConfigurationModel
Channel QPSK 16QAM 64QAM5 MHz 23; 0/010 MHz 45; 0/030 MHz
45 Mbps Base ModelEthernet (Mbps); T1/E1
Channel QPSK 16QAM 64QAM5 MHz 23; 0/010 MHz 45; 0/030 MHz
45 Mbps Base ModelEthernet (Mbps); T1/E1
Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/010 MHz 15; 0/020 MHz30 MHz
15 Mbps Base ModelEthernet (Mbps); T1/E1
Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/010 MHz 15; 0/020 MHz30 MHz
15 Mbps Base ModelEthernet (Mbps); T1/E1
Not available
Available
23; 4/4
Legend
Note: Refer to Exalt capacity charts for detailed TDM and Ethernet migration paths from base to maximum configuration
23 Mbps 4xT1 and4x E1 enabled
Channel QPSK 16QAM 64QAM5 MHz 23; 4/410 MHz 45; 4/430 MHz 94; 4/4 100; 4/4
100 Mbps+4xT1/E1 UpgradesEthernet (Mbps); T1/E1
Channel QPSK 16QAM 64QAM5 MHz 23; 8/810 MHz 45; 16/1630 MHz 94; 16/16 100; 16/16
16xT1/E1 UpgradeEthernet (Mbps); T1/E1
Channel QPSK 16QAM 64QAM5 MHz 7; 4/3 15; 4/4 23; 4/410 MHz 15; 4/4 31; 4/4 45; 4/420 MHz 31; 4/4 63; 4/4 94; 4/430 MHz 45; 4/4 94; 4/4 100; 4/4
100 Mbps UpgradeEthernet (Mbps); T1/E1
Channel QPSK 16QAM 64QAM5 MHz 7; 4/3 15; 8/6 23; 8/810 MHz 15; 8/6 31; 16/14 45; 16/1620 MHz 31; 16/16 63; 16/16 94; 16/1630 MHz 45; 16/16 94; 16/16 100; 16/16
16xT1/E1 UpgradeEthernet (Mbps); T1/E1
page 26 Proprietary and Confidential
Recommended 3rd Party Products Summary
Exalt recommends the following 3rd party products for use with the EX-s Series radios:
Radiowaves11,18,23 GHz1/6 dB
FiltelRemote mount 11 & 18 GHz
TimesLMR-400LMR-600
Andrew LDF2-50 HeliaxLDF4-50 Heliax
Used to connect IDUs to ODU
IF Cable
RFS11 GHz: 2, 3, 4, 6ft.18 GHz:2, 4 ft.23 GHz: 1, 2, 4ft.
Radiowaves11 GHz: 2, 3, 4, 6ft.18 GHz: 1, 2, 3, 4, 6ft.23 GHz: 1, 2, 3, 4, 6ft.
PolyphaserBGXZ-60NFNM-ASRGTGT-NFF-AL
Andrew11,18,23 GHz 3/3 db or 1/6 dB
AndrewRemote mount18 & 23 GHz
Flex-twist waveguide10-15 GHz17.7-26.5 GHz
Andrew11 GHz: 2, 4, 6ft18 GHz: 2, 2.5, 4, 6ft.23 GHz: 1, 2, 2.5, 4, 6ft.
IF in-line devices to protect against power surges
Used for 1+1 configuration to mount two Exalt ODUs to a direct-coupled antenna or remote mount
If standard antennas are used, a remote mount with flex-twist waveguide are required for the Exalt-ODU. Flex twist waveguides connect the standard antenna to the remote mount.
Exalt-specific direct-coupled antennas are available from Andrew, Radio-waves, and RFS
Lightning Protection
Hot Standby CouplersRemote Mounts & Flex Twist Wave-Guides
Antennas
Remote mount
Flex-twist waveguide
page 27 Proprietary and Confidential
Typical 1+0 BOM: Single Endpoint
EX-11s-16EX-18s-16EX-23s-16
16-100F IDU
Select desired antenna model and size from any antenna supplier (rectangular waveguide)
Select required remote mount and flex-twist waveguide from recommended 3rd party list
Standard antennaDirect-coupled antenna
Qty:1 each
Select antenna size and model from recommended 3rd party list
Lightning protection
IF cabling (IDU-ODU)
Installation type
Upgrade Options
ODUModel
See Exalt recommended IF cabling and lightning protection
Qty: 1@length
Installation materialsEquipment selection
Select Ethernet, TDM or AES options for each model
See capacity upgrade options charts
Select Sub-band,Hi or Lo pair
See EX-s Series ODU options chart
EX-11sEX-18sEX-23s
4-100F IDU
Qty 2Qty:1Qty: variesQty: 1Qty: 1
1 2 3 4
4a 4b
5 6
1a
1b
page 28 Proprietary and Confidential
Typical 1+1 BOM: Single Endpoint
One MHS kit is required per end-point
Qty: 1
MHS Kit
One MHS license key per IDU
Qty: 2
MHS License
Keys
Select Ethernet,TDM or AES options for each model
See capacity upgrade options charts
Qty: varies
Upgrade Options
3:3 dB
Select from recommended 3rd party list
Qty: 1
1:6 dB
Hot Standby Coupler
EX-11s-16EX-18s-16EX-23s-16
16-100F IDU
Select desired antenna model and size from any antenna supplier (rectangular waveguide)
Select required remote mount and flex-twist waveguide from recommended third party list
Standard antenna
Direct-coupled antenna
Qty:1 each
Select antenna size and model from recommended third party list
Select lightning
protection
Select IF cabling (IDU-ODU)
Installation typeMHS
Cable kitODUModel
See Exalt recommended IF cabling and lightning protection
Qty: 2 @length
Installation materialsEquipment selection
Quantity depends on how many T1/E1s need to be protected –up to 16xT1/E1. Cable kit includes 4xT1/E1 protection cables
SelectSub-band,Hi or Lo pair
See EX-s Series ODU options chart
EX-11sEX-18sEX-23s
4-100F IDU
Qty: 4Qty:1Qty:1-4Qty: 2Qty: 2
1 2 3 5 6 74 8
7a 7b 8a 8b
9 10
1a
1b
page 29 Proprietary and Confidential
EX-s Series 1+1 Monitored Hot Standby
> 1+1 equipment protection> Maximum reliability for critical connections> Requires license key and 3rd party equipment
Not includedHot Standby Coupler
Not includedSecondary ODU
Not includedSecondary IDU
Required –one per terminalIDU Software License Key
Management control cablingMHS Kit contents
Primary
Secondary
MHSLicense Key
MHSLicense Key
Management controlT1/E1 cabling
MHSHot Standby Coupler
Configuration for EX-11s, EX-18s, and EX-23s
page 30 Proprietary and Confidential
EX-s Series MHS Supported Protection ConfigurationsIDU/ODU on Common Path Using Direct-coupled Antennas
• Most common 1+1 configuration• 16-100 or 4-100 IDU• Exalt-ODU direct-coupled antennas • 3dB symmetrical or 1/6dB
asymmetrical hot standby coupler options
Exalt4ODU (2Hi ,2Lo)
Exalt2-8*MHS cable expansion kit
Exalt416-100 IDU or 4-100 IDU
Exalt4MHS software license keys per terminal
See recommended suppliers2Direct coupled antenna
4x
2
2
Qty Source1+1 BOM (per link)
ExaltMHS kit
Use recommended typesIF cable (at required cable length)
See recommended suppliersHot standby coupler •Depends on the number of T1/E1s that need to be protected. T1/E1 software license keys ordered separately.
IDU
IDU
ODU
ODU
hotstandby coupler
IDU
IDU
ODU
ODU
hotstandby coupler
Exalt MHS kit +Cable Expansion kit
IF cable
IF cable IF cable
IF cable
Exalt MHS kit +Cable Expansion kit
page 31 Proprietary and Confidential
EX-s Series MHS Supported Protection ConfigurationsIDU/ODU on Common Path Using Standard Antennas
• 16-100 or 4-100 IDU• Standard antennas • Exalt-specific remote mounts
with flex-twist waveguide• 3dB symmetrical or 1/6dB
asymmetrical hot standby coupler options
Use recommended types4xIF cable (at required cable length)
Exalt4ODU (2Hi ,2Lo)
Exalt416-100 IDU or 4-100 IDU
Exalt2-8*MHS cable expansion kit
Exalt4MHS software license keys
See recommended suppliers2Flexible waveguide
See recommended suppliers2Exalt ODU-coupled remote mount
Customer preferred supplier2Standard single pol antenna
2
2
Qty Source1+1 BOM (per link)
ExaltMHS kit
See recommended suppliersHot standby coupler
•Depends on the number of T1/E1s that need to be protected
IDU
IDU
ODU
ODU
hotstandby coupler
IDU
IDU
ODU
ODU
hotstandby coupler
IF cable
IF cable IF cable
IF cable
RM
T M
T
Flex-twist waveguide
RM
T M
T
Flex-twist waveguide
Exalt MHS kit +Cable Expansion kit
Exalt MHS kit +Cable Expansion kit
page 32 Proprietary and Confidential
Recommended 3rd Party Products: 11GHz
Exalt-specific direct-coupled antennas
Exalt-specific remote mounts
page 33 Proprietary and Confidential
Recommended 3rd Party Products: 11GHz
Flex-twist waveguide, remote mounts & hot standby couplers
page 34 Proprietary and Confidential
Recommended 3rd Party Products: 18GHz
Exalt-specific direct-coupled antennas
Exalt-specific remote mounts
page 35 Proprietary and Confidential
Recommended 3rd Party Products: 18 GHz
Flex-twist waveguide & hot standby couplers
page 36 Proprietary and Confidential
Recommended 3rd Party Products: 23 GHz
Exalt-specific direct-coupled antennas
page 37 Proprietary and Confidential
Recommended 3rd Party Products: 23 GHz
Remote mounts
Flex-twist waveguide & hot standby couplers
page 38 Proprietary and Confidential
Path Planning Tools
page 39 Proprietary and Confidential
EX-s Series Link Budget Calculator
Convenient access to climate zone data
Enter path distanceand desired capacity
page 40 Proprietary and Confidential
Exalt Path Profiler
>Web based terrain analysis tool for point-to-point links
Optional terrain data, such as buildings, trees, or known obstructions
Location information per endpoint
page 41 Proprietary and Confidential
Exalt Path Profiler
page 42 Proprietary and Confidential
Radio System Management
page 43 Proprietary and Confidential
Summary
> Exalt microwave radios support the following management methods:> HTTP (Internet Explorer or Mozilla Firefox)
- CLI/Telnet (Console access via Ethernet or RS232 Serial port)- SNMPv1, v2c, v3
> Two 10/100BaseT allow two modes of operation:- In-band: Management traffic is transported over
the microwave link- Out-of-band: Management traffic is not transported
over the microwave link. Radios are managed via an external LAN connection using the AUX Ethernet port.
MAIN Ethernet port
AUX Ethernet port
page 44 Proprietary and Confidential
Management via HTTP GUI
> Exalt radios include a web server to allow browser access to management functions. Currently, Internet Explorer and Mozilla Firefox are supported. Only the system IP address is needed to access the login window.
> Two user levels are provided- Administrator, allows read/write of system
parameters and functions- User, allows read-only access to system
parameters and functions
page 45 Proprietary and Confidential
Management via CLI/Telnet
> Management via the Command Line Interface (CLI) can be done in the following ways: - Asynchronous RS232 port- MAIN Ethernet port for in-band
management and using the Telnet protocol
- AUX Ethernet port for out-of-band management using the Telnet protocol
> Two user levels:- Administrator, allows read/write of
system parameters and functions- User, allows read-only access to system
parameters and functions
page 46 Proprietary and Confidential
Management via SNMP> Exalt microwave radios can be managed using
any SNMP-based NMS
> Three versions of the SNMP protocol are supported:
- SNMPv1- SNMPv2c- SNMPv3:
- Latest and most secure - Provides encryption functionality and maintains the
integrity of the transmitted packets - Provides access control and originator verification
through the use of password authentication
> Two functions are provided: SET and GET- Used to read or configure objects predefined in the
system MIB (Management Information Base)
> SNMP TRAP functions are available- Used to automatically communicate predefined
events and alarms to the higher level NMS/EMS
SNMP configuration page
SNMP TRAP configuration page
page 47 Proprietary and Confidential
In-band and Out-of-band Management
Network Operation Center manages entire network remotely
Concatenated links can all be managed with in-band management
Out-of-band management separates management traffic from data traffic. Further segmentation can be done with VLANs
page 48 Proprietary and Confidential
Capacity and Upgrade Charts
page 49 Proprietary and Confidential
EX-11s Capacity and Upgrade Paths(EX-s Series 4-100F IDU + 11GHz ODU)
Base model configuration> 45 Mbps full-duplex capacity> 0x T1/E1> 5, 10 MHz channels> 64QAM
Ethernet upgrade option> 100 Mbps full-duplex capacity> 5, 10, and 30MHz channels> 16QAM and 64QAM> Additional 4xT1/E1 option
T1/E1 upgrade options:> 4xT1/E1 interfaces> Additional 100 Mbps option
Maximum Configured Capacity100 Mbps Ethernet + 4xT1/E1
Note: EX-s Series IDUs also allow 40 MHz channel frequency plan on 30 MHz channels.
EX-11s
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 23; 0/0 5 MHz 23; 4/410 MHz 45; 0/0 10 MHz 45; 4/430 MHz 30 MHz
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 23; 0/0 5 MHz 23; 4/410 MHz 45; 0/0 10 MHz 45; 4/430 MHz 94; 0/0 100; 0/0 30 MHz 94; 4/4 100; 4/4
45 Mbps Base ModelEthernet (Mbps); T1/E1
100Mbps UpgradeEthernet (Mbps); T1/E1
4xT1/E1 UpgradeEthernet (Mbps); T1/E1
100 Mbps+4xT1/E1 UpgradesEthernet (Mbps); T1/E1
100 Mbps
Ethernet UpgradeK00Z00001X
100 Mbps
Ethernet UpgradeK00Z00001X
0-4xT1/E1
TDM UpgradeK00G00001X
0-4xT1/E1
TDM UpgradeK00G00001X
page 50 Proprietary and Confidential
EX-11s-16 Capacity and Upgrade Paths(EX-s Series 16-100F IDU + 11GHz ODU)
Maximum Configured Capacity100 Mbps Ethernet + 16xT1 or
93 Mbps Ethernet + 16xE1
Base model configuration> 45 Mbps full-duplex
capacity> 0x T1/E1> 5, 10 MHz channels> 64QAM
Ethernet upgrade option> No Ethernet-only upgrade
options are available> Residual Ethernet
available up to the maximum 100Mbps when T1/E1 interfaces are disabled (up to the upgraded T1/E1 capacity)
T1/E1 upgrade options> Up to 16xT1/E1> 4, 8, 12, or 16xT1/E1
options> 5, 10, and 30 MHz
channels depending on # of T1/E1
> 16QAM and 64QAM depending on # T1/E1Note: EX-s Series IDUs also allow 40 MHz channel frequency plan on 30 MHz channels.
EX-11s-16
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 23; 0/0 5 MHz 23; 4/410 MHz 45; 0/0 10 MHz 45; 4/430 MHz 30 MHz
Channel QPSK 16QAM 64QAM5 MHz 23; 8/810 MHz 45; 8/830 MHz
Channel QPSK 16QAM 64QAM5 MHz 23; 8/810 MHz 45; 12/1230 MHz 94; 12/12 100; 12/12
Channel QPSK 16QAM 64QAM5 MHz 23; 8/810 MHz 45; 16/1630 MHz 94; 16/16 100; 16/16
16xT1/E1 UpgradeEthernet (Mbps); T1/E1
8xT1/E1 UpgradeEthernet (Mbps); T1/E1
12xT1/E1 UpgradeEthernet (Mbps); T1/E1
45 Mbps Base ModelEthernet (Mbps); T1/E1
4xT1/E1 UpgradeEthernet (Mbps); T1/E1
8- 1
6xT1
/E1
TDM UpgradeK00600011X
4-8x T1/E1
TDM UpgradeK00200011X
0-4xT1/E1
TDM UpgradeK00G00011X
8-12x T1/E1
TDM UpgradeK00500011X
12-16x T1/E1
TDM UpgradeK00700011X
TDM UpgradeK00P00011X
TDM UpgradeK00Q00011X
0-8xT1/E1
0-12xT1/E1
0-16xT1/E1
TDM UpgradeK00R00011X
TDM UpgradeK00400011X
4- 1
6xT1
/E1
4- 1
2xT1
/E1
TDM UpgradeK00300011X
page 51 Proprietary and Confidential
EX-18s and EX-23s Capacity and Upgrade Paths (EX-s Series 4-100F IDU + 18 GHz or 23 GHz ODU)
Base model configuration> 15 Mbps full-duplex > 0x T1/E1> 5, 10 MHz channels> QPSK, 16QAM
Ethernet upgrade options> 30, 60, and 100 Mbps full-
duplex > 5, 10, and 30MHz
channels> QPSK, 16QAM and
64QAM> Additional 4xT1/E1 option
T1/E1 upgrade options > 4xT1/E1 interfaces> Additional 30, 60, and
100Mbps options
Maximum Configured Capacity100Mbps Ethernet + 4xT1/E1Note: EX-s Series IDUs also allow 40 MHz channel frequency plan on 30 MHz channels.
EX-18s & EX-23s
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/0 5 MHz 7; 4/3 15; 4/410 MHz 15; 0/0 10 MHz 15; 4/420 MHz 20 MHz30 MHz 30 MHz
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/0 23; 0/0 5 MHz 7; 4/3 15; 4/4 23; 4/410 MHz 15; 0/0 31; 0/0 10 MHz 15; 4/4 31; 4/420 MHz 31; 0/0 20 MHz 31; 4/430 MHz 30 MHz
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/0 23; 0/0 5 MHz 7; 4/3 15; 4/4 23; 4/410 MHz 15; 0/0 31; 0/0 45; 0/0 10 MHz 15; 4/4 31; 4/4 45; 4/420 MHz 31; 0/0 63; 0/0 20 MHz 31; 4/4 63; 4/430 MHz 45; 0/0 30 MHz 45; 4/4
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/0 23; 0/0 5 MHz 7; 4/3 15; 4/4 23; 4/410 MHz 15; 0/0 31; 0/0 45; 0/0 10 MHz 15; 4/4 31; 4/4 45; 4/420 MHz 31; 0/0 63; 0/0 94; 0/0 20 MHz 31; 4/4 63; 4/4 94; 4/430 MHz 45; 0/0 94; 0/0 100; 0/0 30 MHz 45; 4/4 94; 4/4 100; 4/4
4xT1/E1 UpgradeEthernet (Mbps); T1/E1
30 Mbps+4xT1/E1 UpgradesEthernet (Mbps); T1/E1
30 Mbps UpgradeEthernet (Mbps); T1/E1
60 Mbps UpgradeEthernet (Mbps); T1/E1
100 Mbps UpgradeEthernet (Mbps); T1/E1
15 Mbps Base ModelEthernet (Mbps); T1/E1
60 Mbps UpgradeEthernet (Mbps); T1/E1
100 Mbps UpgradeEthernet (Mbps); T1/E1
30 Mbps
Ethernet UpgradeK00T00001X
30 Mbps
Ethernet UpgradeK00T00001X
0-4xT1/E1
TDM UpgradeK00G00001X
0-4xT1/E1
TDM UpgradeK00G00001X
60 Mbps
Ethernet UpgradeK00W00001X
100 Mbps
Ethernet UpgradeK00Y00001X
60 Mbps
Ethernet UpgradeK00W00001X
100 Mbps
Ethernet UpgradeK00Y00001X
0-4xT1/E1
TDM UpgradeK00G00001X
0-4xT1/E1
TDM UpgradeK00G00001X
60 Mbps
Ethernet UpgradeK00U00001X
Ethernet UpgradeK00V00001X
100 Mbps
60 Mbps
Ethernet UpgradeK00U00001X
Ethernet UpgradeK00V00001X
100 Mbps
page 52 Proprietary and Confidential
EX-18s-16 and EX-23s-16 Capacity and Upgrade Paths(EX-s Series 16-100F IDU + 18 GHz or 23 GHz ODU)
Maximum Configured Capacity100 Mbps Ethernet + 16xT1 or 93 Mbps Ethernet + 16xE1
Base Model Configuration> 15 Mbps full-duplex > 0x T1/E1> 5, 10 MHz channels> QPSK, 16QAM
Ethernet upgrade option> No Ethernet-only upgrade
options are available> Residual Ethernet available
up to the maximum 100Mbps when T1/E1 interfaces are disabled (up to the upgraded T1/E1 capacity)
T1/E1 upgrade options > Up to 16xT1/E1> 4, 8, 12, or 16xT1/E1 options> 5, 10, and 30 MHz channels
depending on # of T1/E1> QPSK, 16QAM, and 64QAM
depending on # T1/E1
Note: EX-s Series IDUs also allow 40 MHz channel frequency plan on 30 MHz channels.
EX-18s-16 & EX-23s-16
Channel QPSK 16QAM 64QAM Channel QPSK 16QAM 64QAM5 MHz 7; 0/0 15; 0/0 5 MHz 7; 4/3 15; 4/410 MHz 15; 0/0 10 MHz 15; 4/420 MHz 20 MHz30 MHz 30 MHz
Channel QPSK 16QAM 64QAM5 MHz 7; 4/3 15; 8/610 MHz 15; 8/620 MHz30 MHz
Channel QPSK 16QAM 64QAM5 MHz 7; 4/3 15; 8/6 23; 8/810 MHz 15; 8/6 31; 12/1220 MHz 31; 12/1230 MHz
Channel QPSK 16QAM 64QAM5 MHz 7; 4/3 15; 8/6 23; 8/810 MHz 15; 8/6 31; 16/14 45; 16/1620 MHz 31; 16/16 63; 16/16 94; 16/1630 MHz 45; 16/16 94; 16/16 100; 16/16
4xT1/E1 UpgradeEthernet (Mbps); T1/E1
16xT1/E1 UpgradeEthernet (Mbps); T1/E1
8xT1/E1 UpgradeEthernet (Mbps); T1/E1
12xT1/E1 UpgradeEthernet (Mbps); T1/E1
15 Mbps Base ModelEthernet (Mbps); T1/E1
8- 1
6xT1
/E1
TDM UpgradeK00600011X
4-8x T1/E1
TDM UpgradeK00200011X
0-4xT1/E1
TDM UpgradeK00G00011X
8-12x T1/E1
TDM UpgradeK00500011X
12-16x T1/E1
TDM UpgradeK00700011X
TDM UpgradeK00P00011X
TDM UpgradeK00Q00011X
0-8xT1/E1
0-12xT1/E1
0-16xT1/E1
TDM UpgradeK00R00011X
TDM UpgradeK00400011X
4- 1
6xT1
/E1
4- 1
2xT1
/E1
TDM UpgradeK00300011X
top related