engineering & construction risk instituteecrisponsor.org/pplibrary/ecri-tc-004-survey...
Post on 21-Apr-2020
12 Views
Preview:
TRANSCRIPT
•
Document number:
ECRI-TC-004
Page: 1 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
NOTICE Subject to the disclaimer in the third and fourth sentences of this Notice, this document and its contents may be downloaded, reproduced, modified and adapted by any Sponsor of the Engineering & Construction Risk Institute, Inc. (“ECRI”) for its exclusive use. Other reproduction, dissemination, use or modification of the Web site posting of this document is prohibited without ECRI’s prior written agreement. ECRI, a nonprofit corporation incorporated under the laws of the District of Columbia (“ECRI”), and its directors, officers, employees and advisers make no representations or warranties (express, implied or statutory) with respect to the accuracy or completeness of any information disseminated by ECRI or its suitability for any purpose and assume no responsibility for the content of such information or the consequences of using it, which shall be at the sole risk of its user. ECRI web site references to other organizations or individuals or their publications, programs, information or services does not imply any ECRI endorsement of any kind.
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Purpose: The purpose of this document is to provide an inventory which shares the ECRI Sponsors knowledge of the standard contract formats used throughout the E&C industry. Introduction: The utilization of an industry standard contract is common practice throughout the world particularly with regard to civil and building works. The standard forms discussed in this document cover contracts used in Australia, Canada, USA, United Kingdom and South Africa. This document can be updates by the Sponsors to provide critique or relevant recommendations. Application: Australia Standards Australia International New South Wales Government Canada Canadian Construction Documents Committee FDIC USA Associated General Contractors American Association of Architects Engineers Joint Contract Documents Committee Associated Owners & Developers Construction Management Association of America Design Build Institute of America Project Services Management Journal United Kingdom Institution of Chemical Engineers New Engineering Contract South Africa South African Institution of Civil Engineers Joint Building Contracts Committee Committee of Land Transport Officials Application: The utilization of an industry standard contract is a decision jointly made by owner and contractor and varies by industry and jurisdiction,
•
Document number:
ECRI-TC-004
Page: 2 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Australia Standards Australia
International
AS4000 Australian Standard for Design-Build
Services
Australia SAI AS4122 Australian Standard for Consultancy
Services
Australia New South Wales Government
GC21 (Edition 1) General Conditions of Contract for Design
(to the extent specified) and Construction
Canada CCDC – Canadian
Construction Documents Committee
CCDC2e Stipulated Price Contract
Canada CCDC – CCDC3e Cost Plus Contract
Canada CCDC – CCDC9a Statutory Declaration by Contractor
Canada CCDC – CCDC9B Statutory Declaration by Subcontractor
Canada CCDC – CCDC10e Stipulated Price Bid
Canada CCDC – CCDC11e Contractor’s Qualification
Statement
Canada CCDC – CCDC12e Project Financial Information
Canada CCDC – CCDC14e Design-Build Stipulated Price
Contract
•
Document number:
ECRI-TC-004
Page: 3 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Canada CCDC – CCDC15e Design Builder Consultant Contract
Canada CCDC – CCDC18e Civil Works Contract
Canada CCDC – CCDC20e A Guide to the Use of CCDC2 1994
Stipulated Price Contract
Canada CCDC – CCDC21e A Guide to Construction
Insurance
Canada CCDC – CCDC22e A Guide to Construction Surety
Bonds
Canada CCDC – CCDC23 A Guide to Calling Bids and Awarding
Contracts
Canada CCDC – CCDC24e A Guide to Model Forms and Support
Documents
Canada CCDC – CCDC40e Rules for Mediation and Arbitration of
Construction Disputes
Canada CCDC – CCDC43e A Guide to the Use of Cost Plus Contract
Canada CCDC – CCDC48e A Guide to the Use of CCDC 18-2001
FIDIC FIDIC Red Book - FIDIC's International Civil
Engineering Conditions, 4th
Edition 1987/1992
- General conditions, Part 1 - 1987 and 1992
versions - Conditions of
Particular Application,
•
Document number:
ECRI-TC-004
Page: 4 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Part II - FIDIC 4th - A
Practical Legal Guide By E C Corbett
- Clause by clause commentary
- Over 90 sample notices
- Tables and introduction - PLUS the
Supplement addressing the 1992
amendments - FIDIC's own User's
Guide - Commentary by the
draftsmen
FIDIC FIDIC Red Book - FIDIC's Construction Contract 1999
- Part I General Conditions
- Guidance for Particular Conditions
- Tender and Appendix to Tender - Forms of Contract
Agreement - and DAB Agreement
- Example Bonds
FIDIC FIDIC Yellow Book - FIDIC's Plant and Design-Build 1999
- Part I General Conditions
- Guidance for Particular Conditions
- Tender and Appendix to Tender - Forms of Contract
Agreement - and DAB Agreement
- Example Bonds
•
Document number:
ECRI-TC-004
Page: 5 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
FIDIC FIDIC Silver Book - FIDIC's EPC Turnkey 1999
- Part I General Conditions
- Guidance for Particular Conditions
- Tender and Appendix to Tender - Forms of Contract
Agreement - and DAB Agreement
- Example Bonds
FIDIC FIDIC Green Book - FIDIC's Short Form
1999
- Part I General Conditions
- Guidance for Particular Conditions
- Tender and Appendix to Tender - Forms of Contract
Agreement - and DAB Agreement
- Example Bonds
FIDIC FIDIC Combined Book - All 4 of FIDIC's 1999
Contracts
- Part I General Conditions
- Guidance for Particular Conditions
- Tender and Appendix to Tender - Forms of Contract
Agreement - and DAB Agreement
- Example Bonds
FIDIC FIDIC Orange Book - Conditions of
Contract for Design-Build and Turnkey
1995 Edition
- FIDIC's Orange Book Conditions of
Contract for Design-Build and Turnkey
- General conditions, Part 1
- Conditions of Particular Application,
•
Document number:
ECRI-TC-004
Page: 6 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Part II - Tender, Appendix
and Agreement - FIDIC's own User's Guide to the Orange
Book - Commentary by the
draftsmen
USA AGC – Associated
General Contractors
AGC 200 Standard Form of Agreement and
General Conditions Between Owner and
Contractor (Where the Contract Price is a
Lump Sum)
USA AGC – AGC 200.1 Potentially Time & Price-Impacted
Materials Amendment. NEW!
USA AGC – AGC 202 Change Order
USA AGC – AGC 203 Interim Directed Change
USA AGC – AGC 204 Request for Information, 2005 edition. COMING
SOON!
USA AGC – AGC 205 Standard Short Form Agreement Between
Owner and Contractor (Where the Contract
Price is a Lump Sum)
USA AGC – AGC 220 Contractor's Qualification Statement for
•
Document number:
ECRI-TC-004
Page: 7 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Engineered Construction
USA AGC – AGC 221 Contractor's Statement of
Qualifications for a Specific Project
USA AGC – AGC 222 Architect/Engineer's Statement of
Qualifications for a Specific Project
USA AGC – AGC 230 Standard Form of Agreement and
General Conditions Between Owner and
Contractor (Where the Basis of Payment is the Cost of the Work
with an Option for Preconstruction
Services)
USA AGC – AGC 235 Standard Short Form Agreement Between
Owner and Contractor (Where the Basis of Payment is the Cost
of the Work)
USA AGC – AGC 240 Standard Form of Agreement Between
Owner and Architect/Engineer
USA AGC – AGC 246 Standard Form of Agreement Between
Owner and Geotechnical Consultant
USA AGC – AGC 250 Standard Form of
•
Document number:
ECRI-TC-004
Page: 8 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Agreement and General Conditions Between Owner and
Contractor (Where the Basis of Payment is a Guaranteed Maximum Price with an Option for Preconstruction
Services)
USA AGC – AGC 260 Performance Bond
USA AGC – AGC 261 Payment Bond
USA AGC – AGC 262 Bid Bond
USA AGC – AGC 263 AGC Warranty Bond
USA AGC – AGC 280 Certificate of Substantial Completion
USA AGC – AGC 281 Certificate of Final Completion
USA AGC – AGC 291 Application for Payment (Where the
Basis of Payment is a GMP)
USA AGC – AGC 292 Application for Payment (Where the Contract Price is a
Lump Sum)
USA AGC – AGC 293 Schedule of Values
USA AGC – AGC 299 Standard Form of Project Joint Venture Agreement Between
Contractors
USA AGC – AGC 400 Preliminary Design-Build Agreement
Between Owner and
•
Document number:
ECRI-TC-004
Page: 9 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Design-Builder
USA AGC – AGC 410 Standard Form of Design-Build
Agreement and General Conditions Between Owner and
Design-Builder (Where the Basis of Payment is the Cost of the Work Plus a
Fee with a Guaranteed Maximum Price)
USA AGC – AGC 415 USA AGC – Associated
General Contractors
USA AGC – AGC 420 USA AGC – Associated
General Contractors
USA AGC – AGC 421 Design-Builder's Statement of
Qualifications for a Specific Project
USA AGC – AGC 450 Standard Form of Agreement Between Design-Builder and
Subcontractor (Where the Design-Builder
Assumes the Risk of Owner Payment)
USA AGC – AGC 455 Standard Form of Agreement Between Design-Builder and
Subcontractor (Where the Design-Builder
•
Document number:
ECRI-TC-004
Page: 10 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
and the Subcontractor Share the Risk of Owner Payment)
USA AGC – AGC 460 Standard Form of Agreement Between Design-Builder and
Design-Build Subcontractor (Where
the Subcontractor Provides a
Guaranteed Maximum Price and Where the
Design-Builder Assumes the Risk of
Owner Payment)
USA AGC – AGC 465 Standard Form of Agreement Between Design-Builder and
Design-Build Subcontractor (Where
the Subcontractor Provides a
Guaranteed Maximum Price and Where the Design-Builder and the Subcontractor Share the Risk of Owner Payment):
USA AGC – AGC 470 Design-Build Performance Bond
(Where the Surety Is Liable for the Design Costs of the Work):
1999.
USA AGC – AGC 471 Design-Build Performance Bond
(Where the Surety Is
•
Document number:
ECRI-TC-004
Page: 11 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Not Liable for the Design Services):
1999.
USA AGC – AGC 472 Design-Build Payment Bond (Where the
Surety Is Liable for the Design Costs of
the Work): 1999.
USA AGC – AGC 473 Design-Build Payment Bond (Where the
Surety Is Not Liable for the Design
Services): 1999.
USA AGC – AGC 480 AIA/AGC Recommended Guidelines for
Procurement of Design-Build Projects in the Public Sector:
1995.
USA AGC – AGC 491 Design-Builder's Application for
Payment (Where the Basis of Payment of
the Design-Build Agreement Is the Cost
of the Work and a GMP Has Been
Established): 1999
USA AGC – AGC 492 Design-Builder's Application for
Payment (Where the Basis of Payment of
the Design-Build Agreement Is a Lump
Sum): 1999
•
Document number:
ECRI-TC-004
Page: 12 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA AGC – AGC 495 Change Order For Cost Plus With GMP
Design-Build Contracts: 1999.
USA AGC – AGC 496 Change Order For Lump Sum Design-
Build Contracts: 1999.
USA AGC – AGC 499 Design-Build Teaming Agreement
USA AGC – AGC 510 Standard Form of Construction Management
Agreement Between Owner and
Construction Manager (Where the
Construction Manager is the Owner's Agent
and The Owner Enters Into All Trade
Contractor Agreements)
USA AGC – AGC 520 Standard Form of Agreement Between
Owner and Trade Contractor (Where the Construction Manager Is The Owner's Agent)
USA AGC – AGC 525 Change Order/Construction
Manager Fee Adjustment
USA AGC – AGC 530 Standard Form of Agreement Between
Owner and Architect/Engineer
•
Document number:
ECRI-TC-004
Page: 13 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
(Where a Construction Manager
Acting as an Agent Has Been Retained by
the Owner)
USA AGC – AGC 565 Standard Form of Agreement Between
Owner and Construction Manager
(Where the Construction Manager
Is Also the Constructor)
USA AGC – AGC 566 Standard Form of Agreement Between
Owner and Construction Manager
(Where the Construction Manager
Is Also the Constructor and
Where the Basis of Payment Is the Cost of the Work Plus a
Fee and There Is No Guarantee of Cost)
USA AGC – AGC 601 Standard Form of Subcontract for Use
on Federal Construction
REVISED
USA AGC – AGC 602 Standard Form Purchase Order COMING SOON!
USA AGC – AGC 603 Standard Short Form Agreement Between
Contractor and
•
Document number:
ECRI-TC-004
Page: 14 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Subcontractor (Where Contractor Assumes
Risk of Owner Payment)
USA AGC –
AGC 604 Standard Short Form Agreement Between the Contractor and
Subcontractor (Where Contractor and
Subcontractor Share Risk of Owner
Payment)
USA AGC – AGC 605 Invitation to Bid/Subbid REVISED
USA AGC – AGC 606 Subcontract Performance Bond
REVISED
USA AGC – AGC 607 Subcontract Payment Bond REVISED
USA AGC – AGC 610 Subcontractor's Application for
Payment
USA AGC – AGC 630 Standard Form of Agreement Between
Contractor and Testing Laboratory
USA AGC – AGC 621 Subcontractor Statement of
Qualifications for a Specific Project NEW!
USA AGC – AGC 650 Standard Form of Agreement Between
Contractor and Subcontractor (Where
•
Document number:
ECRI-TC-004
Page: 15 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Contractor Assumes Risk of Owner
Payment)
USA AGC – AGC 650.1/655.1 Standard Form Rider Between Contractor
and Subcontractor for Storage of Materials at Subcontractor's
Yard
USA AGC – AGC 655 Standard Form of Agreement Between
Contractor and Subcontractor (Where
Contractor and Subcontractor Share
Risk of Owner Payment)
USA AGC – AGC 660 Subcontract Bid Bond REVISED
USA AGC – AGC 670 Standard Form of Agreement Between
Contractor and Subcontractor for
Federal-aid Highway Work
USA AGC – AGC 695 Subcontract Change Order NEW!
USA AGC – AGC 696 Subcontract Interim Directed Change
NEW!
USA AGC – AGC 800 Standard Form of Program Management
Agreement and General Conditions Between Owner and Program Manager
•
Document number:
ECRI-TC-004
Page: 16 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA AGC – AGC 810 Standard Form of Agreement Between Owner and Owner's
Representative Member
USA AIA – The American
Institute of Architects
A101TM 1997 Standard Form of Agreement
Between Owner and Contractor where the Basis of Payment is a
Stipulated Sum
USA AIA – A107TM 1997 Abbreviated Standard Form of
Agreement Between Owner and Contractor
for Construction Projects of Limited Scope Where the
Basis of Payment is a Stipulated Sum
USA AIA – A111TM 1997 Standard Form of Agreement
Between Owner and Contractor Where the Basis of Payment is the Cost of the Work
Plus a Fee with a Negotiated
Guaranteed Maximum Price
USA AIA – A114TM 2001 Standard Form of Agreement
Between Owner and Contractor Where the Basis of Payment is
•
Document number:
ECRI-TC-004
Page: 17 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
the Cost of the Work Plus a Fee without a
Guaranteed Maximum Price
USA AIA – A201TM 1997 General Conditions of the
Contract for Construction
USA AIA – A201TM SC-1999 Federal Supplementary
Conditions of the Contract for Construction
USA AIA – A401TM 1997 Standard Form of Agreement
Between Contractor and Subcontractor
USA AIA – A511TM 1999 Guide for Supplementary
Conditions
USA AIA – A701TM 1997 Instructions to Bidders
USA AIA – B141TM 1997 Standard Form of Agreement
Between Owner and Architect with
Standard Form of Architect's Services
USA AIA – B144TM ARCH-CM-1993 Standard Form of Amendment to the
Agreement Between Owner and Architect Where the Architect
Provides Construction
•
Document number:
ECRI-TC-004
Page: 18 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Management Services as an Adviser to the
Owner
USA AIA – B151TM 1997 Abbreviated Standard Form of
Agreement Between Owner and Architect
USA AIA – B163TM 1993 Standard Form of Agreement
Between Owner and Architect for
Designated Services
USA AIA – B181TM 1994 Standard Form of Agreement
Between Owner and Architect for Housing
Services
USA AIA – B188TM 1996 Standard Form of Agreement
Between Owner and Architect for Limited
Architectural Services for
Housing Projects
USA AIA – B204™ 2004 Standard Form of Architect’s
Services: Value Analysis, for use where the Owner Employs a Value
Analysis Consultant
USA AIA – B205™ 2004 Standard Form of Architect’s
Services: Historic Preservation
•
Document number:
ECRI-TC-004
Page: 19 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA AIA – B206™ 2004 Standard Form of Architect’s
Services: Security Evaluation and
Planning
USA AIA – B210™ 2004 Standard Form of Architect’s
Services: Facility Support
USA AIA – B211™ 2004 Standard Form of Architect’s
Services: Commissioning
USA AIA – B214™ 2004 Standard Form of Architect’s
Services: LEED® Certification
USA AIA – B352TM 2000 Duties, Responsibilities and
Limitations of Authority of the
Architect's Project Representative
USA AIA – B511TM 2001 Guide for Amendments to AIA
Owner-Architect Agreement
USA AIA – B727TM 1988 Standard Form of Agreement
Between Owner and Architect for Special
Services
USA AIA – B801TM CMa-1992 Standard Form of Agreement Between Owner and
•
Document number:
ECRI-TC-004
Page: 20 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Construction Manager
USA AIA – B901TM DB-1996 Standard Form of Agreement
Between Design/Builder and
Architect
USA AIA – C141TM 1997 Standard Form of Agreement
Between Architect and Consultant
USA AIA – C142TM 1997 Abbreviated Standard Form of
Agreement Between Architect and
Consultant
USA AIA – C727TM 1992 Standard Form of Agreement
Between Architect and Consultant for Special Services
USA AIA – C801TM 1993 Joint Venture Agreement for
Professional Services
USA AIA – D101TM 1995 Methods of Calculating Areas and Volumes of Buildings
USA AIA – D200TM 1995 Project Checklist
USA AIA – G601TM 1994 Request for Proposal-Land Survey
USA AIA – G602TM 1993 Request for Proposal-
Geotechnical Services
USA AIA – G605TM 2000 Notification of Amendment to the
•
Document number:
ECRI-TC-004
Page: 21 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Professional Services Agreement
USA AIA – G606TM 2000 Amendment to the Professional
Services Agreement
USA AIA – G607TM 2000 Amendment to the Consultant
Services Agreement
USA AIA – G612TM 2001 Owner's Instructions to the
Architect Regarding the Construction
Contract, Insurance and Bonds, and Bidding Procedures
USA AIA – G701TM 2001 Change Order
USA AIA – G701TM CMa-1992 Change Order, Construction
Manager-Adviser Edition
USA AIA – G702 G703
TM
TM1992 Application and
Certificate for Payment, and
1992 Continuation Sheet
USA AIA – G702TM CMa-1992 Application and Certificate for
Payment, Construction
Manager-Adviser Edition
USA AIA – G704TM 2000 Certificate of Substantial Completion
•
Document number:
ECRI-TC-004
Page: 22 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA AIA – G704TM CMa-1992 Certificate of Substantial Completion, Construction
Manager-Adviser Edition
USA AIA – G704/DB™- 2004, Acknowledgement of
Substantial Completion of a
Design-Build Project
USA AIA – G706TM 1994 Contractor's Affidavit of Payment of Debts and Claims
USA AIA – G706ATM 1994 Contractor's Affidavit of Release of
Liens
USA AIA – G707TM 1994 Consent of Surety to Final
Payment
USA AIA – G707ATM 1994 Consent of Surety to Final
Reduction in or Partial Release of Retainage
USA AIA – G709TM 2001 Work Changes Proposal Request
USA AIA – G710TM 1992 Architect's Supplemental Instructions
USA AIA – G711TM 1972 Architect's Field Report
USA AIA – G712TM 1972 Shop Drawing and Sample Record
USA AIA – G714TM 2001 Construction
•
Document number:
ECRI-TC-004
Page: 23 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Change Directive
USA AIA – G714 CMaTM 1992 Construction Change Directive,
Construction Manager-Adviser
Edition
USA AIA – G715TM 1991 Supplemental Attachment for Acord
Certificate of Insurance 25-S (7/90)
USA AIA – G716™ 2004 Request for Information
USA AIA – G722 CMaTM 1992 Project Application and
Project Certificate for Payment,
Construction Manager-Adviser
Edition
USA AIA – G723 CMaTM 1992 Project Application Summary,
Construction Manager-Adviser
Edition
USA AIA – G804TM 2001 Register of Bid Documents
USA AIA – G805TM 2001 List of Subcontractors
USA AIA – G806TM 2001 Project Parameters Worksheet
USA AIA – G807TM 2001 Project Team Directory
USA AIA – G808TM 2001 Project Data and
•
Document number:
ECRI-TC-004
Page: 24 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA AIA – G808TM A Construction Classification
Worksheet
USA AIA – G809TM 2001 Project Abstract
TM
USA AIA – The American
Institute of Architects
USA EJCDC – Engineers Joint
Contract Documents Committee
C-700 (formerly 1910-8)
The "Standard General Conditions of
the Construction Contract" details the basic terms between
the owner and the contractor:
- contractor's duties and responsibilities, - owner's duties and
responsibilities, - bonds and insurance,
- progress and final payments,
- substantial completion,
- status of the engineer during
construction, - subsurface and
hidden site conditions,
- changes in the work, - contract price and
contract time, - contractor
•
Document number:
ECRI-TC-004
Page: 25 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
warranties and guarantees,
- correction or rejection of defective
work, - work suspension or
termination, and - dispute resolution
USA EJCDC – C-710 Standard General Conditions of the
Construction Contract; Funding
Agency Edition This document is a
modified version of EJCDC Contract
Document #C-700, "Standard General Conditions of the
Construction Contract," designed
for use on RUS-funded water and
wastewater projects. (This is an update and
revision to the 1997 edition, formerly
#1910-8FA.)
USA EJCDC – E-500 Standard Form of Agreement Between Owner and Engineer
for Professional Services
USA EJCDC – E-510 Standard Form of Agreement Between Owner and Engineer
for Professional Services; Funding
•
Document number:
ECRI-TC-004
Page: 26 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Agency Edition. This is a modified funding agency
version of EJCDC Contract Document #E-500, "Standard
Form of Agreement Between Owner and
Engineer for Professional
Services," for use on RUS-funded water
and wastewater projects. (This is an
update and revision to the 1997 edition,
formerly #1910-1FA.)
USA EJCDC – E-520 Short Form of Agreement Between Owner & Engineer
USA EJCDC – E-505 Standard Form of Master Agreement Between Owner &
Engineer for Professional Services
USA EJCDC – E-525 Standard Form of Agreement Between
Owner & Engineer for Study and Report
Professional Services
USA EJCDC – E-580 Standard Form of Joint Venture
Agreement Between Engineers for
Professional Services
•
Document number:
ECRI-TC-004
Page: 27 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA EJCDC – E-581 Standard Form of Agreement Between
Owner, Designer, and Peer Reviewers for
Professional Services for Independent
Project Peer Review
USA EJCDC – E-582 Form of Agreement Between Owner & Program Manager
USA EJCDC – 1910-10 Standard Form of Agreement Between
Engineer and Architect for
Professional Services
USA EJCDC – 1910-14 Standard Form of Agreement Between
Engineer and Consultant for
Professional Services
USA EJCDC – 1910-27A Standard Form of Agreement Between
Owner and Geotechnical Engineer for
Professional Services
USA EJCDC – 1910-27-B Standard Form of Agreement Between
Engineer and Geotechnical Engineer for
Professional Services ()
USA EJCDC – D-001 Guide to Use of EJCDC Design/Build
•
Document number:
ECRI-TC-004
Page: 28 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Documents offers guidance on:
- preparing requests for proposals,
- proposal language, - proper use of the
documents, - the preparation of
supplementary conditions,
USA EJCDC –Committee
D-500 Standard Form of Agreement Between Owner and Owner's
Consultant for Design Professional Services
on Design/Build Projects
USA EJCDC – D-505 Standard Form of Sub agreement Between
Design/Builder & Engineer for Design
Professional Services
USA EJCDC – D-510 Standard Form of Agreement Between
Owner & Design/Builder for
Preliminary Services
USA EJCDC – D-520 Standard Form of Agreement Between
Owner & Design/Builder; Stipulated Price
USA EJCDC – D-521 Suggested Form of Sub agreement
Between Design/Builder &
•
Document number:
ECRI-TC-004
Page: 29 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Subcontractor; Stipulated Price
USA EJCDC – D-525 Standard Form of Agreement Between
Owner & Design/Builder; Cost
Plus
USA EJCDC – D-526 Suggested Form of Sub agreement
Between Design/Builder &
Subcontractor; Cost-Plus
USA EJCDC – D-610 Design/Build Contract Performance Bond
USA EJCDC – (D-615) Design/Build Contract Payment Bond
USA EJCDC – D-700 Standard General Conditions of the Contract Between
Owner & Design/Builder
USA EJCDC – D-750 Standard General Conditions of the
Subcontract Between Design/Builder &
Subcontractor
USA EJCDC – E-580 Standard Form of Joint Venture
Agreement Between Engineers for
Professional Services
USA EJCDC – (R-520) Agreement Between Owner &
•
Document number:
ECRI-TC-004
Page: 30 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Environmental Remediator;
Stipulated Price
USA EJCDC – (R-521) Agreement Between Environmental Remediator &
Subcontractor; Stipulated Price
USA EJCDC – (R-525) Agreement Between Owner and
Environmental Remediator; Cost
Plus
USA EJCDC – (R-700) Standard General Conditions of the
Construction Contract Between Owner and
Environmental Remediator
USA EJCDC – (R-750) Standard General Conditions of the Sub agreement Between
Environmental Remediator & Subcontractor
USA EJCDC – (1910-9E) Limitation of Liability in Design
Professional Contracts
USA EJCDC – (1910-9G) Indemnification by Engineers: A Warning
USA AOD – Associated
AOD-2002GC Standard Form Agreement between
•
Document number:
ECRI-TC-004
Page: 31 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Owners & Developers
Owner & Contractor for a Fixed or Lump
Sum Price
USA AOD – AOD-2003 GC/GMP AOD publishes Owner/Developer
Contracts. The AOD-2003 GC/GMP is the second of a series of contract documents to be published by
AOD. The others to be released in the future (not listed in order of
release) are: 1. Standard Form of Agreement between
Owner and Architect/Engineer 2. Standard Form of Agreement between
Owner and Construction Manager
3. Standard Form of Agreement between Owner and Design-
Builder 4. Standard Form of Agreement between Owner and General
Contractor where the Price is Lump Sum (already available)
Owner Group Is Next To Draft Alternative
Standard Agreement
•
Document number:
ECRI-TC-004
Page: 32 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA CMAA - Construction Management
Association of America
CMAR-1: Standard Form of Agreement, Owner-
CM
USA CMAA - CMAR-2: Standard Form of Agreement, CM-
Contractor
USA CMAA - CMAR-3: General Conditions, CM-Contractor
USA CMAA - CMAR-4: Standard Form of Agreement, CM-
Designer
USA CMAA - A-1: Standard Form of Agreement between
Owner and CM, CM as Owner’s Agent
USA CMAA - A-2: Standard Form of Agreement between
Owner and Contractor
USA CMAA - A-3: General Conditions between Owner and
Contractor
USA CMAA - A-4: Standard Form of Agreement between Owner and Designer
USA DBIA - Design-Build Institute of
America
520 Standard Form of Preliminary
Agreement Between Owner and Design-
Builder.
•
Document number:
ECRI-TC-004
Page: 33 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
USA DBIA - 525 Standard Form of Agreement Between Owner and Design-Builder - Lump Sum
USA DBIA - 530 Standard Form of Agreement Between Owner and Design-Builder - Cost Plus
Fee with an Option for a Guaranteed
Maximum Price
USA DBIA - 535 Standard Form of General Conditions of
Contract Between Owner and Design-
Builder
USA DBIA - 540 Standard Form Of Agreement Between Design-Builder and
Designer
USA DBIA - 550 Standard Form Of Agreement Between Design-Builder and
General Contractor - Cost Plus Fee with an
Option for a Guaranteed Maximum
Price
USA DBIA - 555 Standard Form Of Agreement Between Design-Builder and
General Contractor - Lump Sum
USA DBIA - 560 Standard Form Of Agreement Between
•
Document number:
ECRI-TC-004
Page: 34 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Design-Builder and Design-Build
Subcontractor - Guaranteed Maximum
Price
USA DBIA - 565 Standard Form Of Agreement Between Design-Builder and
Design-Build Subcontractor - Lump
Sum
USA DBIA - 570 Standard Form Of Agreement Between Design-Builder and
Subcontractor (Where Subcontractor Does Not Provide Design-
Build Services)
USA PSMJ - Project Services
Management Journal
General Contract Design-Build Agreement Between
Owner and Contractor
USA PSMJ - General “Lump Sum” Contract
Agreement for Design/Build Services on a Lump Sum Basis
USA PSMJ General/State Agency Contract
Design-Build Contract Form
Agreement, and the General and
Supplementary Conditions of the
Design-Build Contract
USA PSMJ - Owner- Owner-Design/Builder
•
Document number:
ECRI-TC-004
Page: 35 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Design/Builder Contract
Agreement
USA PSMJ - State/Owner-Design/Builder
Contract
Agreement Between Owner and
Design/Builder
USA PSMJ - Architect-Design/Builder
Contract
Agreement for Architectural Services (Design/Build Project)
USA PSMJ - General Contract Agreement for Design-Build Services
USA PSMJ - General Contract Design-Build Team Agreement
USA PSMJ - General Contract Agreement – Final Design and
Construction
USA PSMJ - General Contract Agreement for Design/Build Services
USA PSMJ - General Contract Design/Build Contract
USA PSMJ - General Contract-Large City
Agreement – Large City
USA PSMJ - General Contract Agreement Form
USA PSMJ Owner-Contractor Owner-Contractor Agreement
USA PSMJ - General Contract Fixed Price Design, Procure and
Construct Agreement
USA PSMJ - Contract Form General Contract – Short Form
USA PSMJ - General Contract State Agreement for Preparation of a
Design-Build Lease
•
Document number:
ECRI-TC-004
Page: 36 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
Competition Proposal
USA PSMJ - General Contract State Design/Build Contract
USA PSMJ General Contract Guaranteed Maximum Sum Contract
USA PSMJ - Agreement Joint Venture Agreement
USA PSMJ - General Contract/ Joint Venture
Design/Build Agreement
USA PSMJ - General Contract/ Joint Venture
Proposal – GMP Design/Build Project Sharing Profits and
Losses
USA PSMJ - Journal General Contract/Guaranteed
Maximum Sum
Design/Build Guaranteed Maximum
Price Contract
USA PSMJ - Form Sample Form/General
USA PSMJ - Agreement Commitment Portion of Design/Build
Agreement Construction Agreement
USA PSMJ Rider Rider to Standard AIA Contract
USA PSMJ Rider Rider - Miscellaneous
USA PMI - Project Management
Institute
N/A No contract standard forms available on
line
•
Document number:
ECRI-TC-004
Page: 37 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
UK Institution for Chemical Engineers
IChemE
The Purple Book Forms of Contract User Guide - Fourth
edition Contents The Preliminaries; General Introduction; Project Management and Contract Strategy; Disputes and disputes resolution; Liability Law – Delays and Defect; Red Book – Lump Sum Contracts; Green Book – Reimbursable Contracts; The Burgundy Book – Target Cost Contracts; Yellow and Brown Books – Sub Contract; Orange Book – Minor Works.
UK IChemE The Beige Book Form of Contract, Rules for Dispute Board, sets out a series of Rules governing the
appointment, duties and general actions of the DRB, to provide a
framework within which it can operate
with confidence.
USA IChemE The Brown Book Form of Contract, Subcontract for Civil Engineering Works
Second edition, includes: A new
clause on related
•
Document number:
ECRI-TC-004
Page: 38 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
issues under main contract; Payment
clauses improved by inclusion of
provisional and prime cost sum A better guidance section
giving more detailed advice on compiling
the contract plus useful pointers on using the general
conditions
UK IChemE The Burgundy Book Form of Contract , Target Cost Contracts - sets out a procedure for arriving at a target
cost that is sufficiently detailed to be used as the basis for effective control during the contract.
UK IChemE The Green Book Form of Contract, Reimbursable
Contracts - Third Edition
Contains a set of general Conditions of contract to enable the user to put together a reimbursable contract
to suit most needs. Also supplied are typical forms of agreement and guarantee and
guidance notes.
•
Document number:
ECRI-TC-004
Page: 39 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
U.K. NEC - New Engineering
Contract
NEC - ECC The Engineering and Construction Contract The Engineering and
Construction Contract – Options A-F
Option A: Priced contract with activity
schedule Option B: Priced
contract with bill of quantities
Option C: Target contract with activity
schedule Option D: Target
contract with bill of quantities
Option E: Cost reimbursable contract
Option F: Management contract
U.K. NEC - NEC - ECS The Engineering and Construction Subcontract
U.K. NEC NEC - PSC The Professional Services Contract
U.K. NEC NEC – ECSC The Engineering and Construction Short
Contract
U.K. NEC NEC – ECSS The Engineering and Construction Short
Subcontract
•
Document number:
ECRI-TC-004
Page: 40 of 40
Revised: 4 January 2010
Survey of Standard Form of Contracts for the E&C Industry
ENGINEERING & CONSTRUCTION RISK INSTITUTE
Jurisdiction
Form Sponsor
Form Number
Form Name
Available Critique or
Recommended Practices
U.K. NEC NEC – AC The Adjudicator’s Contract
RSA South African Institution of
Civil Engineers
SAICE General Conditions of Contract for
Construction Works (First Edition) 2004
RSA Joint Building Contracts Committee
JBCC 2101 Principal Building Agreement
RSA JBCC JBCC 2104 Engineering General Conditions
RSA Committee of Land Transport
Officials
COLTO General Conditions of Contract for Road and
Bridge Works for State Road Authorities.
top related