electroless nickel heaters - industrialheatingsystems.com
Post on 13-Apr-2022
8 Views
Preview:
TRANSCRIPT
9530 W. Bethel Ct. Suite B | Boise, ID 83709 |(208-323-6143) | www.industrialheatingsystems.com
Electroless Nickel Heaters
Why Industrial Heating Systems for your Electroless Nickel Tanks? Reliability !
Made in the U.S.A.
All Welded Junctions Boxes to keep humidity and moisture out on the316 Stainless and Titanium Heaters.
Available in 316 SS, 316 SS electropolished, Titanium, Quartz and PTFE.
9 tubeall welded Stainless J-Box
12 tubeall welded Stainless J-Box
3 tube -2” w/ all welded J-Box
3 tube -2” w/ all
welded J-Boxhandle
and electropolished
Available in;3,6,9,12,15,18,24,and 27kWall voltages and phase
6ft lead cables. Non conductive level controls available.
Over the sides shown. L-Shape available
Industrial Heating Systems Electroless Nickel Systems Recommendations.
6 kW per 50 gallons
Try to use 208 or 240 volt power, 3 phase
15 to 25 Watts per square inch on heaters
Kynar Pumps are best
CPVC are good- Sch 80 on piping
Use Natural Poly Pro
use 1/2 HP per 50 gallons
Use A 5 micron Bag Filter - 4”
Split the piping. 1/2 for agitation and theother for filtration.
Place a leg of the agitation under the heaters
Use a Industrial Heating Systems ABS air bubbler system for level safety . Thissystem is non conductive and won’t cause plateout.
top related