dynapac cc222 232 422 522 602 512 whopshop manual hydraulic diagram

SVEDALA COMPACTION AND PAVING

Svedala Compaction Equipment ABBox 504, SE-371 23 Karlskrona, Sweden

Telephone +46 455 627 00Telefax +46 455 627 30

W1050-1 EN

DYNAPAC CC222/232/CCC422/522/CCA 602/512

WORKSHOP MANUALHYDRAULIC DIAGRAM

Hydrauliccircuit diagram CA/CC W-1050-1 EN 1

Vibratory and Combination RollersCC 222/232/C and CC422/522/C

CA 602/512

Work Shop Manual,Hydraulic diagramW1050-1 EN

We reserve the right to change specifications without notice.Printed in Sweden.

2 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 3

ContentsHydrauliccircuit diagram

Contents PageSafety regulations ................................................................................................................. 5-6Hydraulic diagrams ............................................................................................................ 7-28 Hydraulic diagram 1/2 CC222/232/C .................................................................................. 7 Hydraulic diagram 2/2 CC222/232/C .................................................................................. 8 Propulsion CC222/232/C ..................................................................................................... 9 Brakes CC222/232/422/522/C ............................................................................................. 10 Vibrations both drums CC222/232 ...................................................................................... 11 Vibrations front drum only CC222/232............................................................................... 12 Vibrations combi machine CC222C/232C .......................................................................... 13 Steering straight forward CC222/232/C .............................................................................. 14 Steering right turn CC222/232/C ......................................................................................... 15 Hydraulic diagram 1/2 CC422/522/C .................................................................................. 16 Hydraulic diagram 2/2 CC422/522/C .................................................................................. 17 Propulsion CC422/522/C ..................................................................................................... 18 Vibrations both drums CC422/522 ...................................................................................... 19 Vibrations front drum only CC422/522............................................................................... 20 Vibrations combi CC422C .................................................................................................. 21 Steering straight forward CC422/522/C .............................................................................. 22 Steering right turn CC422/522/C ......................................................................................... 23 Hydraulic diagram 1/2 CA602/512 ..................................................................................... 24 Hydraulic diagram 2/2 CA602/512 ................................................................................... 25 Propulsion CA602/512 ........................................................................................................ 26 Vibrations CA602/512 ......................................................................................................... 27 Steering CA602/512 ............................................................................................................ 28

Hydrauliccircuit diagram CA/CC W-1050-1 EN 5

General advice

·Make yourself familiar with the equipment of the machine.·Only operate the machine if your are completely familiar with theoperating and control elements as well as the functioning of the machine.

·Use your safety equipment like helmet, safety shoes and hearing protection.·Make yourself familiar with your working field.·Only operate the machine for its intended purpose.

Please observe the guidelines of the machine manufacturerand safety manual, A 281.

Before starting

·Study and understand the operating instructions before starting.·Check the machine for any serious faults.·Do not operate the machine with defective instruments, warning lights or control

elements.·All safety devices must be in a secure position.·Do not carry loose objects or secure them to the machine.·Keep oily and inflammable material away from the machine.·Before entering the driver's cab, check if persons or obstacles are in the way of or

underneath the machine.·Be careful when entering the driver's cab, use the steps.·Adjust your seat before starting.

Safety Regulations

6 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Start

�When starting, all operating levers must be in �neutral position�.�Only start the machine from the driver�s seat.�Check the indicating instruments after start to ensure that all functions are in

order.�Do not leave the machine unattended when the engine is running.�When starting with battery connection cables, connect plus to plus and minusto minus.

�Disconnect the earth (negative) first. Connect it last.

Warning

Exhaust fumes is dangerous. Ensure sufficient fresh air when starting in closedrooms!

Electrical and hydraulic equipment

1. Personal safety must be observed when batteries are handled or tested.2. A fully equipped medical kit, including eye-wash facilities, should be available and protective clothing, including eye protection, should be worn.

3. Acid splashes in the eye should be treated immediately with plenty of clean water and neutralized with sodium bicarbonate solution.

4. Acid splashes on clothing must be treated with an alkali, such as ammonia, ifholes are to be avoided.

5. A safety hazard exist during or after battery charging due to emission of ahighly flammable hydrogen gas. Any testing involving production of sparks, e.g.

electrical load test, must not be performed until the gas has dispersed from the cell. A similar hazard occurs when a battery is fitted on to a vehicle immediately after the battery has been removed from a charging plant.

6. Hydraulic equipment is under high pressure. Fluids (fuel, hydraulic oil) which escape under high pressure can penetrate the skin and cause serious injury. Therefor immediately consult a doctor if such injury occurs.

7. Notice that failure on the hydraulic or electrical system may give the roller an unpredictable and dangerous function.

Safety Regulation contd.

Hydrauliccircuit diagram CA/CC W-1050-1 EN 7

8 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 9

10 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 11

12 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 13

14 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 15

16 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 17

18 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 19

20 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 21

22 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 23

24 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 25

26 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 27

28 Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN 29

DY

NA

PA

C C

A15

2 H

ydra

ulic

dia

gram

30 Hydrauliccircuit diagram CA/CC W-1050-1 EN

DY

NA

PA

C C

A15

2 H

ydra

ulic

dia

gram