duratape es indoor - duralamp · 0.375” 0.20” prde aluminum channel with dual lens for dual...
Post on 23-May-2018
216 Views
Preview:
TRANSCRIPT
Details
DURATAPETM ESIP20 INDOOR & IP65 DAMP
05.30.15 - Page 1 of 7
MODEL(S)
PROJECT TYPE
Duratape™
Ordering GuideLED COLORWATTAGE
30 = 3.0 W/ft39 = 3.9 W/ft44 = 4.4W/ft
VOLTAGE
24 = 24 VDC22 = 2200°K24 = 2400°K27 = 2700°K30 = 3000°K35 = 3500°K
IP RATING
I = Indoor IP20
D=Damp IP65 Sleeve
SEE PAGE 4 FOR POWER SUPPLIES
MODEL INTENSITY
ES = Extra Narrow Spacing
Dimensional Drawings
LED DataModel Wattage Viewing Angle Lifespan at 90% drive
Standard 3.0W/ft 0.08W per LED 120° 60,000hrs
High Output 3.9W/ft 0.10W per LED 50,000hrs
Ultra Output 4.4W/ft 0.12W per LED 40,000hrs
* LEDs operating at 90% of LED manufacturers maximum current rating.
Fixture DataModelIndoor 3000°K LED color
Efficacy* Lm/Wt Lm/Ft Wt/Ft Wt/LED
Standard 3.0W/ft 60.00* 180 3.0 0.08
High output 3.9W/ft 76.41* 298 3.9 0.10
Ultra output 4.4W/ft 81.27* 357 4.4 0.12
* Meets Title 24 High efficacy rating.
Duralamp - Duratape ES (XS) Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
0.40"
0.33" O.C.
Key Features• Energy efficient LED flexible linear light strip for
continuous consistant color in linear applications• Ideal for IP20 interior or IP65 (with optional sleeve)
location applications such as cove, under-counter/cabinet, and lighting accents
• Sold per foot and manufactured to specified lengths with factory attached end preps
• All Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability
• All Duratape features double sided solder points for maximum conductivity and durability
• Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration
• Max continuous length: up to 19’ per run (3.9W/ft) up to 22’ per run (3.0W/ft) up to 15’ per run (4.4W/ft)
• Multiple dimming options available
Spacing 0.33” OC LED Spacing
LEDs 36 LEDs per foot
Color Temp Available in 2200°K, 2400°K, 2700°K, 3000°K and 3500°KAdvanced LED binning with +/- 2-step MacAdams ellipse
End Preps Factory prepped end preps available (See Page 2)
Field Cuts See page 2 for cut zones
Mounting Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface
Lens Options Optional lens covers with choice of clear, frosted 10% for indirect use, frosted 30% for direct view or frosted 60% for full diffusion
Installation Optional mounting channels and clips, protective lens covers, thermal channels and heat transfer tape for optimal maintainance. Field trimmable every 4”
Power Supply Listed Class II 24 VDC power supply required
Listing cULus / CE listed
Compliance ROHS compliant
Warranty 3 year warranty
Narrow spacing ES TapelightEnergy Efficient LED flexible linear light strip for continuous
consistent color in linear applications. Extremely flexible and adjustable lengths for varied architectural applications.
DL ES 24
Duralamp - Duratape ES (XS) Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
0.48"
IP20 Indoor
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
0.08"
IP65 Damp
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
0.16"
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
DURATAPETM ES IP20 INDOOR & IP65 DAMP
ASingle lead wire prep. 24” Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end.
BDouble ended lead wire prep. 24” lead wire at both ends.One end can be used for power connectivity while the other end can be used for a jumper cable to run to an additional length of Duratape. Caution: Pay attention to max run lengths and voltage drops from total lead/jumper wire lengths.
CJumper cable (specified length)Jumper cables can be factory attached to Duratape to meet your specified installation requirements. Jumper lengths available as 1”, 2”, 3”, 4”, 6”, 12”. Add length number to end of part number. Caution: Pay attention to max run lengths and voltage drops from total lead/jumper wire lengths.
Field Cut DetailsDuratape can be field cut to accomodate most installations, by cutting at the indicated field cut sections.
Caution! Field cutting should only be done before connection power.
D12” Additional lead wire Purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length.
Duralamp - Duratape ES (XS) Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
4"
07UI1CBL1
07UI1CBL2
07UI1JMPCBL-XX
07UI1ADDCBL
EAdditional connectors. Lead wire connectors 2/ea per connection.
07UI1ADDCON
F
24” Additionallead wire
lead wire using the newlockable interconnect
A DC
H G
F F
FRemovable/lockable interconnect lead wire. 24” lead wire with locking and unlocking lead connector.
07UI1LICON
G
GDuratape segment. Wire fold 1” 18ga wire factory attached between specified lengths of segments (4” intervals only).
DL-ES-FOLD-I-1
24” Additionallead wire
lead wire using the newlockable interconnect
A DC
H G
F F
Wiring Options
A B C
24” Additionallead wire
lead wire using the newlockable interconnect
A DC
H G
F F
D E
24” Additionallead wire
lead wire using the newlockable interconnect
A DC
H G
F F24” Additional
lead wirelead wire using the new
lockable interconnect
A DC
H G
F F
24” Additionallead wire
lead wire using the newlockable interconnect
A DC
H G
F F24” Additional
lead wirelead wire using the new
lockable interconnect
A DC
H G
F F
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
Duratape features solder points for maximum continuity for long lifespan.
0.08"
IP20 Indoor IP65 Damp
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
0.16"
5/16”O.C.
13/32”
Duralamp - Duratape Static Indoor
Duralamp - Duratape Static Indoor. With option PVC sleeve
05.30.15 - Page 2 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
DURATAPETM ESIP20 INDOOR & IP65 DAMP
Mounting Accessories
DL-HT-TAPE1/2” wide thermally conductive mounting tape. Factory attached and sold per foot.
DL-HS-TAPE2” wide aluminum foil tape, used to create a flexible thermal sink. Sold in 100’ rolls.
DL-ES-FOLD-I-1Wire fold 1” 18ga wire factory attached between specified lengths of segments (in 4” intervals). For curved applications that require lateral bends for upward illumination.
DL-ES-FOLD-I-XSpecified lengths of 18ga wire fold.
DL-1-LICDuratape lockable interconnect. Can be unlocked for easy replacement or maintenance.
DL-1-LIC-90Duratape 90º lockable interconnect. Can be unlocked for easy replacement or maintenance.
DL-ALUM-U-4Low profile aluminum U-Channel for linear run lengths, available in 4’ lengths.1/2” ID, 5/8” OD, 1/4” H
DL-ALUM-L-4Low profile aluminum 1/2” x 1/2” L-Channel for linear run lengths. Duratape can be mounted at either 0º or 90º mounting positions. Available in 4’ lengths.
DL-I-MCHAN-8Mounting channel, sold in 8 foot lengths. Can be used with Duratape (no PVC sleeve) and outdoor Duratape (with PVC sleeve) for linear applications.
DL-I-45-MCH-445° mounting base, sold in 4 foot lengths. Used with Duratape (no PVC sleeve) for 45° mounted linear applications.
DL-I-45-CVR-4-C (Clear)DL-I-45-CVR-4-F/10/F30/F60 (Frosted)45° mounting base cover, sold in 4 foot lengths.
DL-I-2PC-C (Clear)DL-I-2PC-F10/F30/F60 (Frosted)Two-piece mounting tube; base (clear) with cover, sold in 8 foot lengths. Used with Duratape (no PVC sleeve) for linear applications. Clear or frosted at 3 diffusion levels, 10%, 30% or 60%.
0.69”
0.63”
17mm
19.2mm
22mm24.8mm
0.66”
0.20”
0.66”
0.62”
0.375”
0.20”
0.20”
0.66”
17mm
19.2mm
22mm24.8mm
0.66”
0.20”
0.66”
0.62”
0.375”
0.20”
17mm
19.2mm
22mm24.8mm
0.66”
0.20”
0.66”
0.62”
0.375”
0.20”
0.20”
0.375”
0.66”
0.62”
DL-1-LIC-FOLD-1Duratape lockable interconnect with flexible 1” 18ga wire fold.
DL-1-LIC-FOLD-XDuratape lockable interconnect with flexible (specified lengths) 18ga wire fold.
DL-EC-20 Silicone end cap for termination of IP20 tape.
DL-EC-65 Silicone end cap for termination of IP65 tape.
DL-SLEEVE-CLP-65 Sleeve mounting clips. Package of 10 each for 5 ft section.
05.30.15 - Page 3 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
DURATAPETM ES IP20 INDOOR & IP65 DAMP
17mm
19.2mm
22mm24.8mm
0.66”
0.20”
0.66”
0.62”
0.375”
0.20”
17mm
19.2mm
22mm24.8mm
0.66”
0.20”
0.66”
0.62”
0.375”
0.20”
17mm
19.2mm
22mm24.8mm
0.66”
0.20”
0.66”
0.62”
0.375”
0.20”
PRDEAluminum channel with dual lens for dual tape runs illuminating in opposite directions.
PRDSAPAluminum channel with curved lens for dual tape runs for unique lighting effects.
PRDSANAluminum channel with curved lens for 45º angled dual tape run illumination.
0.63”
0.75”0.50”0.47” 0.76”
0.63” 0.63”1.00”
2.00” 2.00”
2.00”2.00”
3.75”
1.38”
PRAN2045º aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.
DL-AL-CHAN-20-LENSFrosted lens, available in 4’ lengths.
DL-AL-CHAN-20-45EC-145º end cap with hole for interconnectivity.
DL-AL-CHAN-20-45EC-245º end cap with no hole for run length termination.
DL-AL-CH-45-C-IMounting clip for indoor aluminum channel.
PRIN20Flush mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.
DL-AL-CHAN-20-LENSFrosted lens, available in 4’ lengths.
DL-AL-CHAN-20-EC-1End cap with hole for interconnectivity.
DL-AL-CHAN-20-EC-2End cap with no hole for run length termination.
DL-AL-CH-WOC-IMounting clip for indoor aluminum channel.
PRAP20Surface mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.
DL-AL-CHAN-20-LENSFrosted lens, available in 4’ lengths.
DL-AL-CHAN-20-EC-1End cap with hole for interconnectivity.
DL-AL-CHAN-20-EC-2End cap with no hole for run length termination.
DL-AL-CH-WOC-IMounting clip for indoor aluminum channel.
PRINTCRecessed aluminum channel for walk-over inground applications, includes frosted polycarbonate cover. Suitable for IP65 and IP66 installation applications. Available in 4’ lengths.
DL-AL-CHAN-WOEC-1End cap with hole for interconnectivity.
DL-AL-CHAN-WOEC-2End cap with no hole for run length termination.
DL-AL-CH-WOCMounting clip for indoor aluminum channel.
0.50”
0.50”
Profiles
50,5
5 m
m 12,4 mm
12,5 mm
47,4 mm
50 mm
49,7
mm
50 mm
12,42 mm
85 mm
47,4 mm
35 m
m
33 m
m
we changed the color fo the back slide because this is aluminum as the rest of the channel, while we colored bluish the polycarb screens, psl note
19,4
mm
16 mm
25 mm
8 m
m
05.30.15 - Page 4 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
DURATAPETM ESIP20 INDOOR & IP65 DAMP
54 LINES OF LIGHT FOR GENERAL LIGHTING
DURAPROFILE PLUS DOUBLE EMISSION ARCHITECTURAL PROFILE
DURAPROFILE PLUS - ALUMINIUM DOUBLE EMISSION PROFILE *
Code Description L Barcode80119058
new PRDESO Double emission aluminium profile 1220 39970 1new PRDESO-SL Rear support for surface mount 1220 39987 1new PRDESO-FL Front screen in flat opal polycarbonate plate 1220 39994 1new PRDESO-FLR Couple of opal polycarbonate rear screen 1220 40020 1new KTPRDESO-FL Set of two side caps flat screen - 40068 1new KTPRDESO Suspension kit - 40051 1
* Available upon request.
Linear architectural pro�le con�gurable in direct, indirect emission or both, for high levels of light emission . The direct emission is con�gurable with the use of 1 to 4 strips; indirect emission foresees two strips . Mounting: on ceiling for unidirectional or suspended for unidirectional or double emission. The aluminium pro�le is completed, depending on the application chosen, with screens (�at front and rear pair of screens for indirect emission), side closure caps and suspension kit .
For ceiling mounting the rear support is required, code PRDESO-SL, on which the pro�le can be attached . Compartment inside the pro�le suitable for the insertion of the power supply and dimmer . Possibility of on/o� switching and dimming separate for direct and indirect lighting.
SUSPENDED MOUNTING WITH TWO STRIPS FOR INDIRECT LIGHTING AND 4 FOR DIRECT LIGHT
CEILING MOUNTING WITH 4 STRIPS FOR DIRECT LIGHT
CEILING MOUNTING WITH 3 STRIPS FOR DIRECT LIGHT
PRDESODouble emission aluminum channel. Available in 4’ lengths.
PRDESO-SLRear support for surface mount. Available in 4’ lengths.
PRDESO-FLFront lens in flat opal polycarbonate plate. Available in 4’ lengths.
PRDESO-FLRCouple of opal polycarbonate rear lens. Available in 4’ lengths.
KTPRDESO-FLSet of two caps flat lens.
KTPRDESOSuspension kit.
Duraprofile Plus - Aluminum Double Emission Profile• Linear architectural profile configurable in direct,
indirect emission or both, for high levels of light emission
• The direct emission is configurable with the use of 1 to 4 Duratape strips; Indirect emission uses two strips
• Mounting: On ceiling for unidirectional or suspended for unidirectional or double emission (direct & indirect)
• Manufactured according to specification, with lens (flat front and rear pair of lens’ for indirect emisison), side closure caps and suspension kit
• Rear support required for ceiling mounting, code PRDESO-SL
• Profile features internal compartment suitable for integral power supply and dimming module (Consult Factory)
• Possibility of on/off switching and dimming separate for direct and indirect lighting
05.30.15 - Page 5 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
DURATAPETM ES IP20 INDOOR & IP65 DAMP
Power Supplies
Electronic Driver Magnetic Transformer
DuraLamp S.p.A.- A brand of Targetti Poulsen Industries •P.IVA • E-mail:info@DuraLampUSA.comwww.duralamp.it
Ver. 1.1 06-2014foegaP
LineVoltage
Input
Duratape
UL listedJ-box
by others
Wiring fromtransformer to
J-box must be toClass II standard.
Refer to NECand local coderequirements.
PowerSupply
LineVoltage
Input
Duratape
UL listedJ-box
by others
Wiring fromtransformer to
J-box must be toClass II standard.
Refer to NECand local coderequirements.
PowerSupply
LineVoltage
Input
Duratape
UL listedJ-box
by others
Wiring fromtransformer to
J-box must be toClass II standard.
Refer to NECand local coderequirements.
PowerSupply
Electronic Driverin Enclosure
LineVoltage
Input
Duratape
UL listedJ-box
by others
Wiring fromtransformer to
J-box must be toClass II standard.
Refer to NECand local coderequirements.
PowerSupply
Cat No Type Voltage Wattage Listing Dimensions Dimmable
DEL-I-120-1-4-24 Electronic 90-305V AC / 24V DC 96W / 1X4A** cULus 10”W X 10”L 4”D* No
DEL-I-240-2-4-24 90-305V AC / 24V DC 192W / 2X4A** cULus 10”W X 10”L 4”D*
DEL-I-320-3-4-24 90-305V AC / 24V DC 288W / 3x4A** cULus 10”W X 10”L 4”D*
DEL-120-1-4-24 90-305V AC / 24V DC 96W / 1X4A** UL/CE 2.67”W X 9.66”L 1.53”D
DEL-I-120-1-4-24-D 90-305V AC / 24V DC 96W / 1X4A** cULus 10”W X 10”L 4”D* Integral 0-10V dimming interface
DEL-I-240-2-4-24-D 90-305V AC / 24V DC 192W / 2X4A** cULus 10”W X 10”L 4”D*
DEL-I-320-3-4-24-D 90-305V AC / 24V DC 288W / 3x4A** cULus 10”W X 10”L 4”D*
DMG-40-1-1.6-24 Magnetic 120V AC / 24V DC 40W / 1X1.6A** cETLus 2.00”W X 5.06”L 2.14”D YesTriac/MLVDMG-60-1-2.4-24 120V AC / 24V DC 60W / 1X2.4A** cETLus 2.25”W X 6.55”L 2.55”D
DMG-120-1-4-24 120V AC / 24V DC 96W / 1X4A** cETLus 3.00”W X 9.80”L 3.00”D
DMG-192-2-4-24 120V AC / 24V DC 192W / 2X4A** cETLus 3.00”W X 9.80”L 3.00”D
* Dimensions include enclosure with mounting bracket** 4A maximum current protection for each seconday circuit*** Constant voltage drivers 50HZ , voltage regulated with short circuit protection. operating temperature -40 C- 80° C
Electronic Driver Magnetic Transformer
Electronic DriversFor use with 0-10V interface (DLD-1-10) for secondary side dimming control. Generally used for programmable dimming levels for changing scenarios.
Magnetic TransformersFor use with primary side dimming with an MLV forward phase dimming system (supplied by others). Generally used for a pre-set dimming level.
05.30.15 - Page 6 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
DURATAPETM ESIP20 INDOOR & IP65 DAMP
DimmersCat No Type Voltage Max Load Dimensions
D-MG-600 Magnetic 120VAC/120VAC 450W Single Gang Box - Recessed
D-MG-600H 277VAC/277VAC 450W Single Gang Box - Recessed
D-MG-1000 120VAC/120VAC 800W Dual Gang Box - Recessed
D-MG-1000H 277VAC/277VAC 800W Dual Gang Box - Recessed
DLD-1-10 Electronic SEL V: 10-24VControl: 0-10V (< 0.6 mA)
96W 1.5”W X 7”L X 0.75”DSingle Gang
Dimmer
V+ V- N L
System Layout Example Diagram
DLD-1-10Dimming Module
-DIM
1 LED Output 2+ - +
t 24V DC Input+ - +
Osram-DIM
1 LED Output 2- + - +
- + - +
-DIM
LED Output 1 LED Output 2- + - +
0-10V Input 24V DC Input- + - +
OT 1OT 2OT 3
-DIM
1 LED Output 2+ - +
t 24V DC Input+ - +
Osram-DIM
1 LED Output 2- + - +
- + - +
-DIM
LED Output 1 LED Output 2- + - +
0-10V Input 24V DC Input- + - +
OT 1OT 2OT 3
-DIM
1 LED Output 2+ - +
t 24V DC Input+ - +
Osram-DIM
1 LED Output 2- + - +
- + - +
LED Output 1 LED Output 2- + - +
0-10V Input 24V DC Input- + - +
Standard Dimmable Power Supplies
DEL-I-120-1-4-24DEL-I-240-2-4-24DEL-I-320-3-4-24
Integral Dimming(0-10V)
Power SuppliesDEL-I-120-1-4-24-DDEL-I-240-2-4-24-DDEL-I-320-3-4-24-D
Positive
Negative
Hot
NeutralGround
positivenegative
positivenegative
positivenegative
05.30.15 - Page 7 of 7Copyright © 2015 Duralamp USA – A Targetti Group Company - 3184-C Airway Ave. Costa Mesa, CA 92626 - Phone (714) 513-1991 - Email: info@DuralampUSA.com - www.duralampusa.com
top related