dual truscene insect screen installation 031svr

Copyright ©2008 Renewal by Andersen Corporation. All rights reserved. 1 of 1

Dual TruScene Insect Screen Installation031SVR

STEP 1 - �The�Dual�TruScene�Insect�Screen�is�comprised�of�two�separate�insect�screens.Position the right side insect screen to the left of the bottom insect screen track, then insert the top of the screen into the top insect screen track and slide insect screen to the right making sure bottom of screen goes into bottom insect screen track. Push screen all the way to the right making sure screen is engaged in top and bottom insect screen tracks.

NOTE:Warninglabelshouldfacetheinteriorofthehomeandbelocatedatthebottom.

STEP 2 - �Insert the top of the left side insect screen into the top insect screen retainer. Push or pull bottom of screen towards interior of home to align the two wing blades with the wing blade slots at bottom center of the insect screen and the bottom left of the window frame. Engage wing blades into wing blade slots from the interior of the home.

All views are from exterior (outside looking in).

NOTE:Warninglabelshouldfacetheinteriorofthehomeandbelocateatthebottom.

top insect screen retainer

bottom insect screen retainer

astragal

Push�insect�screen�with�astragal�to�the�far�right

astragal

bottom insect screen retainer

wing blades

top screen retainer

right Insect Screen

left Insect Screen