d&s partnership - davisandshirtliff.com · pedrollo pks cast iron-epoxy electro coated body...
Post on 20-Aug-2019
214 Views
Preview:
TRANSCRIPT
D&S Partnership
Europe’s leading pump manufacturer
Over 20 years partnership with D&S
quality & reliable solutions
Specialty in Surface, Well, Borehole,
sewage & drainage pumps
PEDROLLO PK
Cast iron-epoxy electro coated body
Motor bracket- aluminium with brass insert-reduce seizure
Impeller-brass with peripheral vanes
5.4m3/h, 100m, Suction lift 8m, -10oC to +60oC
Easy to use & economical
Can be used with small pressure tank & pressure control
*Option of hydrofresh available
PEDROLLO CP
Cast iron-epoxy electro coated body
Body backplate-AISI304 (cast iron-CP170, 190, 200)
Impeller-AISI304, 9.6m3/h, 56m, Suction lift 7m
-10oC to +90oC
Can be used with small pressure tank & pressure control
*Option of hydro fresh available
*Option of AISI304 (CP ST4) & AISI316 (CP ST6) available
PEDROLLO JSW
Jet Pumps-Self priming
Body -cast iron, Back plate-SS, Impeller-AISI304
4.2m3/h, 48m, Suction lift 9m, -10oC to +40oC
Clean water that may contain air
Reliable & easy to use
Can be used with small pressure tank & pressure control
PEDROLLO PKS
Cast iron-epoxy electro coated body
Motor bracket- aluminium with brass insert
Impeller-brass with peripheral radial vanes
3m3/h, 70m, Suction lift 9m, -10oC to +60oC
In medium containing air or gas
Best for drawing water from underground tanks
Can be used with small pressure tank & pressure control
Pump has a flap check valve (non return valve)
PEDROLLO CK
Cast iron pump body
Impeller -brass with star type open radial vane
High suction lift-9m (3m3/h & 51m)
In installations that may contain air or irregular fluid
& Diesel
PEDROLLO AL RED
Stainless Steel pump body, back plate &
impeller-guaranteeing complete hygiene & max
resistance to corrosion
9.6m3/h, 23m closed head
-10oC to +90oC temp range
Domestic, agricultural & industrial application
PEDROLLO PQ 3000
Stainless Steel AISI 316 pump body-
guaranteeing complete hygiene & max resistance
to corrosion
Impeller- Bronze
3m3/h, 180m,
Industrial application
PEDROLLO NGACentrifugal pumps with Open Impeller
Cast iron pump body with AISI304 backplate & SS AISI316
Impeller
Open impeller allows –liquids containing relatively high
levels of impurities without clogging the impeller- rivers,
canals & reservoirs
Thermal cut out available for single phase mechanical
overload protection
Option available in SS AISI316 for all parts in contact with
pumped medium
PEDROLLO 4CR80 & 5CRm100Self priming multistage pump
3CRm60-N 0.37kw
3CRm100-N 0.55kw
4CRm80 0.55kw
5CRm100 0.75kw -new
AISI304 S/S pump housing, noryl impellers & diffusers
0.5m3/hr – 7.8m3/hr at between 9m to 60m head
Extremely Quiet
Temp -10oC to +40oC
Good for installations with air in medium,
Can be connected to a pressure tank
PEDROLLO PLURIJET 60-80-100 SS pump body
Noryl Impeller
Low –flow & head (7m3/h 50m)
Silent, reliable & low energy consumption
Good for installations with air in medium
Can be connected to a pressure tank
Suction 9m
Thermal cut out available for single
phase mechanical overload protection
PEDROLLO PLURIJET 90-130-200
SS pump body
Noryl Impeller
High –flow & head (12m3/h 100m)
Silent, reliable & low energy consumption
Good for installations with air in medium
Can be connected to a pressure tank
Suction 9m
Thermal cut out available for single
phase mechanical overload protection
PEDROLLO TOP
Fibre-glass pump construction with techno-plastic reinforcement
Used for clear water (10mm)
Open centrifugal impeller for water containing light silt loads
NORYL impeller and external float switch for automatic pump
control starting and topping
Double seal -complete motor cooling
Thermal cut-out to protect against overload
PEDROLLO TOP VORTEX
Fibreglass pump construction with technoplastic reinforcement
Easy to use & reliable
Used for Dirty water (20mm diameter)
Open centrifugal impeller for water containing light silt loads
Technopolymer impeller-Vortex and external float switch for
automatic pump control starting and topping
Double seal -complete motor cooling
Thermal cut-out to protect against overload
3m max immersion depth
PEDROLLO Dm
Body-Cast iron, epoxy coated
Impeller-Technopolymer open type
16.5m3/h, 26m head
Max Immersion depth-5m
Used for Dirty water (10mm diameter)
Clean or slightly dirty water
Reliable especially under automatic operating conditions
PEDROLLO TOP Multi
Fibre-glass pump construction with techno-plastic
reinforcement
7.2m3/h, 42m
1.3mm suspended solids, 22mm agl, 40oC
Multi for manual -foatswitch
Jacketed motor design for excellent cooling performance
Double mechanical seal for total motor sealing
Thermal cut-out to protect against overload
Works better with a pressure tank (3-5)Litres
PEDROLLO TOP Tech 2
Fibre-glass pump construction with techno-plastic reinforcement
7.2m3/h, 42m, 1.3mm suspended solids, 22mm agl, 40oC
Automatic-Pressure below 1.5bar-starts pump
Flow below 3l/m-stops pump-against dry running
Prolonged inactivity-every 48hrs pump runs for 10s
Jacketed motor design for excellent cooling performance
Double mechanical seal for total motor sealing
Thermal cut-out to protect against overload
**Vertical distance btn pump outlet and delivery point should not exceed 10m
PEDROLLO DAVIS
Stainless steel pump housing
Direct connection to mains power
Brass impeller resistant to abrasion
Very clean water (3m3/h – 75m )
Vertical & horizontal installation
Include a float switch incase of well installation
Thermal cut-out to protect against overload
20/40m drop cable available
PEDROLLO UP Stainless steel pump housing
Independent NORYL floating impellers to minimize blockage
Max sand handling-150g/m3
Raised suction point
Float switch included
Jacketed motor design for effective cooling
20m drop cable available
Almost 2/3 smaller in size and cost compared to the NK version.
Improved efficiency
4 Block/Sali
Stainless steel pump housing
High efficiency & reliability
Up to 150g/m3 of silt
Inbuilt thermal overload for motor protection
Direct mains connection through 10A fuse or MCB
Include a float switch incase of well installation
60m max immersion depth
20m drop cable available
Fluid Solar
4” Multi stage Stainless steel solar pump
High performance motor -permanent magnets
Up to 150g/m3 of silt
Electronic control incorporated in the motor
Supplied complete with a digital control box
Recommended Voltage -(70-110)V, 1000w
4mm2 -40m cable
6mm2-60m cable
4 SR & 6SR WET END
AISI304 Stainless steel pump housing
150g/m3 silt content handling capacity-4SR –19m3/h, 400m-4SR
100g/m3 silt content handling capacity-6SR – 60m3/h, 350M-6SR
Impeller-Lexan (4SR1-8), Norly (4SR10-15),
6SR-Special rubber coated Norly
High efficiency and reliability
Non-return valve
98mm external diameter-4SR
149.5mm external diameter-6SR
4 PD & 6PD SUB-MOTORS
4” and 6” Pedrollo Sumbersible motors
Range 0.37kw to 18.5kW-Oil filled, rewindable
4PD-Jacket AISI 316, shaft Duplex S/S
Resistance to corrosion-high chloride levels
High efficiency and reliability
IP68 as compared to others IP58 (max protect against dust
particles & immersion)
6PD-Jacket AISI 304,
Priced similar to Tesla
Easy Small & Easy Press
Dry run protection with automatic restart
Stops-below 2l/m.
Easy-press-replaces Pressure tank
Easy-small-automatically tries to resume
normal service at intervals of 15, 30, 60)min.
Also manual at any time-when needed
Controlled cycling frequency incase of
pressure leakage
LED status indicators to monitor pump
operation
Strong IP65 rated weather sealed housing
Controllers
PEDROLLO TRITUS 1.1kW & 2.2kW 3ph Grinder pump,
Heavy gauge robust cast iron construction with Epoxy &
Electro coated body
Impeller-Technopolymer open type
• Grinder-Tempered AISI 440C stainless steel
• Grinds suspended solids and fibres in sewers
3m3/hr - 15m3/hr at 17m to 31m head
10m –max. immersion depth
cw floatswitch
PEDROLLO VX
VX40/40 3kW Sewage pump introduced
Heavy duty cast iron construction with S/S
pump housing, Vortex impeller-Cast Iron
• Two mechanical seals separated by an oil chamber •
10m3/hr - 40m3/hr at 11m to 21m head
10m –max. immersion depth
40mm particle size passage
top related