ds lab manual[1]

Ex: No: 1 IMPLEMENTATION OF SINGLY LINKED LIST

To write a program to create insert, delete, modify, and view nodes in a singly linked list.

ALGORITHM:

1. Start the program execution.

2. The basic operation performed area. Creation of a listb. Insertion of a nodec. Modification of a noded. Deletion of a nodee. View the node

3. In creation of a list a. Initialize the top pointer by –1.b. Read the data to be store in the list roll, by incrementing the top pointer by 1.

4. In insertion of a nodea. Check whether the list is fully occupied or not.b. If the list is full, insert operation is terminated. If the list is not full, follow the

next steps position.c. Increment the top pointer by 1d. Read the data to be stored in the first position of the list roll.

5. In modification of a node a. Check whether the list is empty or notb. If the list is empty, the modification operation terminates.c. Change the information of the node.

6. In deletion of a nodea. Check whether the list is empty or not.b. Left shift the existing data in the list roll by one, from its second position to the

last position.c. Decrement the top pointer by 1.

7. Display the result.

8. Stop the program execution.

PROGRAM:

/* SINGLY LINKED LIST */

#include<stdio.h>

#include<conio.h>

typedef struct list

int roll;

char name[20];

struct list *link;

}node;

node* getnode();

void createlist(node **headptr);

void insertfirst(node **headptr);

void insertlast(node **headptr);

void insertmiddle(node **headptr);

void deletefirst(node **headptr);

void deletelast(node **headptr);

void deletemiddle(node **headptr);

void modifynode(node *head);

void viewlist(node *head);

int countlist(node *head);

void releasenode(node *newnode);

void displaymenu();

void main()

node *head = NULL;

int ch,count;

displaymenu();

while(1)

printf("\nEnter your choice\a:");

fflush(stdin);

scanf("%d",&ch);

switch(ch)

case 0 :

createlist(&head);

break;

case 1 :

insertfirst(&head);

break;

case 2 :

insertlast(&head);

break;

case 3 :

insertmiddle(&head);

break;

case 4 :

deletefirst(&head);

break;

case 5 :

deletelast(&head);

break;

case 6 :

deletemiddle(&head);

break;

case 7 :

modifynode(head);

break;

case 8 :

viewlist(head);

break;

case 9 :

count = countlist(head);

printf("Num,ber of nodes in the list is %d",count);

break;

case 10 :

displaymenu();

break;

default :

printf("End of run of your program");

exit(0);

void displaymenu()

clrscr();

printf("\nBasic operations in a Singly Linked List");

printf("\n\t 0. Creatlist");

printf("\n\t 1. Insert First");

printf("\n\t 2. Insert Last");

printf("\n\t 3. Insert Middle");

printf("\n\t 4. Delete First");

printf("\n\t 5. Delete Last");

printf("\n\t 6. Delete Middle");

printf("\n\t 7. Modify Node");

printf("\n\t 8. View List");

printf("\n\t 9. Count Nodes");

printf("\n\t 10. Show Menu");

printf("\n\t 11. Exit");

node* getnode()

node * newnode;

int size = sizeof(node);

newnode = (node *)malloc(size);

return(newnode);

void readnode(node* newnode)

printf("\nEnter The RollNo:");

scanf("%d",&newnode->roll);

printf("\nEnter the Name:");

scanf("%s",newnode->name);

newnode->link = NULL;

void releasenode(node *newnode)

free(newnode);

void createlist(node **headptr)

node *head = NULL,*newnode,*last;

char ch;

newnode = getnode();

readnode(newnode);

if(head == NULL)

head = newnode;

last = head;

last->link = newnode;

last = last->link;

fflush(stdin);

printf("Do u wish to add data in the list(Y/N)?");

scanf("%c",&ch);

}while((ch == 'Y')||(ch == 'y'));

*headptr = head;

displaymenu();

void insertfirst(node **headptr)

node *head,*newnode;

head = *headptr;

readnode(newnode);

if(head == NULL)

head = newnode;

newnode->link = head;

head = newnode;

*headptr = head;

displaymenu();

void insertlast(node **headptr)

node *head,*last,*newnode;

head = *headptr;

readnode(newnode);

if(head == NULL)

head = newnode;

last=head;

while(last->link != NULL)

last = last->link;

*headptr = head;

displaymenu();

void insertmiddle(node **headptr)

int insdata;

head = *headptr;

if(head == NULL)

printf("Singly Linked List is Empty,so new node is headnode");

readnode(newnode);

head = newnode;

printf("Enter the rollno after which the insertion to be made");

scanf("%d",&insdata);

last = head;

while(last != NULL)

if(last->roll == insdata)

readnode(newnode);

newnode->link = last->link;

return;

last = last->link;

printf("Insert node is not found");

*headptr = head;

displaymenu();

void deletefirst(node **headptr)

node *head,*delnode;

head = *headptr;

if(head == NULL)

printf("singly Linked List is Empty");

return;

delnode = head;

head = head->link;

printf("\n Deleted Roll no %d \n Name %s",delnode->roll,delnode->name);

releasenode(delnode);

*headptr = head;

void deletelast(node ** headptr)

node *head,*delnode,*last,*prev;

head = *headptr;

if(head == NULL)

printf("\n List is Empty");

return;

else if(head->link == NULL)

delnode = head;

head = NULL;

last = head;

while(last->link !=NULL)

prev = last;

last = last->link;

delnode= last;

prev->link = NULL;

printf("\nDelted rollno is %d Name %s",delnode->roll,delnode->name);

*headptr = head;

void deletemiddle(node **headptr)

int deldata;

head = *headptr;

if(head == NULL)

return;

printf("Enter the roll no to be deleted");

scanf("%d",&deldata);

if(head->roll == deldata)

delnode = head;

head = head->link;

printf("Deleted data \nRollno %d \n Name%s",delnode->roll,delnode->name);

*headptr = head;

return;

last = head->link;

prev = head;

while(last != NULL)

if(last ->roll == deldata)

delnode = last;

prev->link = last->link;

printf("Deleted data \n Roll no %d and \t Name %s",delnode->roll,delnode->name);

return;

last = last->link;

prev = prev->link;

printf("\ndelete node is not found");

*headptr = head;

void modifynode(node *head)

int moddata;

if(head == NULL)

return;

printf("\nEnter the node rollno for modification");

scanf("%d",&moddata);

while(head != NULL)

if(head->roll == moddata)

printf("\n Modify the data of the node");

printf("\nEnter the Roll no:");

scanf("%d",&head->roll);

printf("\n Enter the new Name:");

scanf("%s",head->name);

return;

head = head->link;

printf("\n Modify node not found");

void viewlist(node *head)

if(head == NULL)

printf("\NLIST IS EMPTY");

return;

for(;head != NULL;head = head->link)

printf("\nRollNo:%d\tName:%s",head->roll,head->name);

int countlist(node *head)

int count=0;

if(head == NULL)

printf("\nList is Empty");

return 0;

for(;head != NULL;head = head->link)

count = count + 1;

return count;

RESULT:

Thus the program for singly linked list was executed successfully.

Ex. No. 2 IMPLEMENTATION OF DOUBLY LINKED LIST

To write a program to create insert, delete, modify, and view nodes in a doubly linked list.

CONCEPTS:

2. The basic operation performed area. Creation of a listb. Insertion of a nodec. Modification of a noded. Deletion of a nodee. View the node

3. In creation of a list a. Initialize the top pointer by –1.b. Read the data from the userc. Connect the nodes with the list.

4. In insertion of a nodea. Get the new node using GETNODE () and read the details of the node using

READNODE.b. Check whether the list is fully occupied or not.c. If the list is full, insert operation is terminated. If the list is not full, follow the

next steps position.d. The forward link is made to point the first node e. The backward link of the first node is made to point the new node by assigning

the address of the new node.f. Assign new node as the head pointer.

5. In modification of a node a. Check whether the list is empty or notb. If the list is empty, the modification operation terminates.c. Change the information of the node.

6. In deletion of a nodea. Check whether the list is empty or not.b. Set the head pointer to the second node in the list.c. Set the backward link field of the head node in the list to NULL.

d. Release the memory for the deleted node.

PROGRAM:

/* DOUBLY LINKED LIST */

#include<stdio.h>

typedef struct list

int roll;

char name[20];

struct list *flink,*blink;

}node;

clrscr();

node* getnode();

int countlist(node *head);

void displaymenu();

void main()

node *head = NULL;

int ch,count;

displaymenu();

while(1)

printf("\n\n ?");

fflush(stdin);

scanf("%d",&ch);

switch(ch)

case 0 :

createlist(&head);

break;

case 1 :

insertfirst(&head);

break;

case 2 :

insertlast(&head);

break;

case 3 :

break;

case 4 :

deletefirst(&head);

break;

case 5 :

deletelast(&head);

break;

case 6 :

break;

case 7 :

modifynode(head);

break;

case 8 :

viewlist(head);

break;

case 9 :

printf("Number of nodes in the list is %d",count);

break;

case 10 :

displaymenu();

break;

default :

printf("End of run of your program");

exit(0);

clrscr();

void displaymenu()

printf("\nBasic operations in a Doubly Linked List");

printf("\n\t 0. Creatlist");

printf("\n\t 1. Insert First");

printf("\n\t 2. Insert Last");

printf("\n\t 3. Insert Middle");

printf("\n\t 4. Delete First");

printf("\n\t 5. Delete Last");

printf("\n\t 6. Delete Middle");

printf("\n\t 7. Modify Node");

printf("\n\t 8. View List");

printf("\n\t 9. Count Nodes");

printf("\n\t 10. Show Menu");

printf("\n\t 11. Exit");

node* getnode()

int size;

node * newnode;

size = sizeof(node);

return(newnode);

printf("\nEnter The RollNo:");

scanf("%d",&newnode->roll);

printf("\nEnter the Name:");

scanf("%s",newnode->name);

newnode->flink = NULL;

newnode->blink = NULL;

free(newnode);

node *head = NULL,*newnode,*last;

char ch;

readnode(newnode);

if(head == NULL)

head = newnode;

last = head;

{ last->blink = last;

last->flink = newnode;

last = last->flink;

fflush(stdin);

printf("Do u wish to add data in the list(Y/N)?");

scanf("%c",&ch);

while((ch == 'Y')||(ch == 'y'));

*headptr = head;

node *head,*newnode;

head = *headptr;

readnode(newnode);

if(head == NULL)

head = newnode;

newnode->flink = head;

head->blink = newnode;

head = newnode;

*headptr = head;

head = *headptr;

readnode(newnode);

if(head == NULL)

head = newnode;

last=head;

while(last->flink != NULL)

last = last->flink;

newnode-> blink = last;

*headptr = head;

node *head,*last,*newnode,*next;

int insdata;

head = *headptr;

if(head == NULL)

printf("Doubly Linked List is Empty,so new node is headnode");

readnode(newnode);

head = newnode;

printf(" Enter the rollno after which the insertion to be made");

last = head;

while(last != NULL)

if(last->roll == insdata)

readnode(newnode);

next=last->flink;

newnode->flink =next;

newnode->blink =last;

if(next !=NULL)

next ->blink = newnode;

return;

last = last->flink;

printf("Insert node is not found");

*headptr = head;

node *head,*delnode;

head = *headptr;

if(head==NULL)

printf("\n Doubly Linked List is Empty");

return;

delnode = head;

head = head->flink;

if(head!=NULL)

head ->blink = NULL;

printf("\n Deleted Data is.........\n");

printf("\n Roll No.: %d", delnode -> roll);

printf("\n Name: %s",delnode -> name);

*headptr = head;

void deletelast(node ** headptr)

head = *headptr;

if(head == NULL)

return;

else if(head->flink == NULL)

delnode = head;

head = NULL;

last = head;

while(last->flink !=NULL)

last = last-> flink;

prev = last -> blink;

delnode= last;

prev->flink = NULL;

printf("\nDelted rollno is %d Name %s",delnode->roll,delnode->name);

*headptr = head;

node *head,*delnode,*last,*prev,*next;

int deldata;

head = *headptr;

if(head == NULL)

return;

printf("Enter the roll no to be deleted");

if(head->roll == deldata)

delnode = head;

head = head->flink;

if(head !=NULL)

head -> blink = NULL;

printf("Deleted data \nRollno %d \n Name%s",delnode->roll,delnode->name);

*headptr = head;

return;

last = head->flink;

// prev = head;

while(last != NULL)

if(last ->roll == deldata)

delnode = last;

prev = last -> blink;

next = last -> flink;

prev->flink = next;

if(next !=NULL)

next -> blink = prev;

printf("Deleted data \n Roll no %d and \t Name %s",delnode-

>roll,delnode->name);

return;

last = last->flink;

//prev = prev->link;

printf("\ndelete node is not found");

*headptr = head;

int moddata;

if(head == NULL)

return;

printf("\nEnter the node rollno for modification");

while(head != NULL)

if(head->roll == moddata)

printf("\n Modify the data of the node");

printf("\nEnter the Roll no:");

scanf("%d",&head->roll);

scanf("%s",head->name);

return;

head = head->flink;

if(head == NULL)

printf("\NLIST IS EMPTY");

return;

for(;head != NULL;head = head->flink)

int count=0;

if(head == NULL)

printf("\nList is Empty");

return count;

for(;head != NULL;head = head->flink)

count = count + 1;

return count;

RESULT:

Thus the program for doubly linked list was executed successfully.

Ex. No. 3 IMPLEMENTATION OF CIRCULAR LINKED LIST

To write a program to create insert, delete, modify, and view nodes in a circular linked list.

CONCEPTS:

1. Start the program execution.2.3. The basic operation performed are

a. Creation of a listb. Insertion of a nodec. Modification of a noded. Deletion of a nodee. View the node

4. In creation of a list a. Initialize the top pointer by –1.b. Read the data from the userc. Connect the nodes with the list.

5. In insertion of a nodea. Get the new node using GETNODE() and read the details of the node using

READNODE.b. Check whether the list is fully occupied or not.c. The link field of the new node is made to point the data field of the first node in

the list by assigning the address of the first node.d. The head pointer is made to point the data field of the new node by assigning

the address of the new node.

6. In modification of a node a. Check whether the list is empty or notb. If the list is empty, the modification operation terminates.c. Change the information part of the node.

7. In deletion of a nodea. Check whether the list is empty or not.b. Set the head pointer to the second node in the list.c. Release the memory for the deleted node.

8. Display the result

PROGRAM:

/*Circular Linked List*/

#include <stdio.h>

typedef struct list

int roll;

char name[20];

struct list *link;

}node;

node* getnode();

void displaymenu();

void main()

node *head = NULL;

int ch, count;

clrscr();

displaymenu();

while(1)

printf("\n\n?");

fflush(stdin);

scanf("%d", &ch);

switch(ch)

case 0:

createlist(&head);

break;

case 1:

insertfirst(&head);

break;

case 2:

insertlast(&head);

break;

case 3:

break;

case 4:

deletefirst(&head);

break;

case 5:

deletelast(&head);

break;

case 6:

break;

case 7:

modifynode(head);

break;

case 8:

viewlist(head);

break;

case 9:

printf("Number of node in the list is %d", count);

break;

case 10:

displaymenu();

break;

default:

printf("End of the run of your program...");

exit(0);

void displaymenu()

printf("\n Basic operations in a circularly linked list...");

printf("\n0.Create list");

printf("\n1.insert first");

printf("\n2.insert last");

printf("\n3.insert middle");

printf("\n4.delete first");

printf("\n5.delete last");

printf("\n6.delete middle");

printf("\n7.modify node");

printf("\n8.view list");

printf("\n9.count list");

printf("\n10.show menu");

printf("\n11.exit");

node* getnode()

int size;

node *newnode;

size = sizeof(node);

return (newnode);

printf("\nenter the roll number:");

scanf("%d", &newnode -> roll);

printf("Enter the name:");

scanf("%s", newnode -> name);

newnode -> link = newnode;

free(newnode);

node * head = NULL, *newnode, *last;

char ch;

readnode(newnode);

if(head == NULL)

head = newnode;

last =head;

last -> link = newnode;

newnode -> link = head;

last= last -> link;

fflush(stdin);

printf("do u wish to add data in the list(y/n)? ");

scanf("%c", &ch);

}while((ch == 'Y') || (ch == 'y'));

*headptr = head;

node *head, *newnode, *last;

head = *headptr;

readnode(newnode);

if(head == NULL)

head = newnode;

last = head;

while(last -> link != head)

last = last -> link;

head = newnode;

*headptr = head;

node *head, *newnode, *last;

head = *headptr;

readnode(newnode);

if(head == NULL)

head = newnode;

last = head;

while(last -> link != head) last = last -> link;

*headptr = head;

node *head, *newnode, * last;

int insdata;

head = *headptr;

if(head == NULL)

printf("The circularly linked list is empty."

"so newnode is head node.");

readnode(newnode);

head = newnode;

printf("\n Enter the node roll no after which the"

"insertion is to be made:..");

last = head;

if(last -> roll == insdata)

newnode =getnode();

readnode(newnode);

newnode -> link = last -> link;

return;

}while(last != head);

printf("The insert node is not found");

*headptr = head;

node *head, *delnode, *last;

head = *headptr;

if(head == NULL)

printf("\n Circularly linked list is empty..");

return;

delnode =head;

if(head -> link == head)

head = NULL;

last = head;

while(last -> link != head);

head = head -> link;

last -> link = head;

printf("\n deleted data is...\n"

"\n roll number : %d",delnode -> roll);

printf("\n Name : %s", delnode -> name);

*headptr = head;

void deletelast(node **headptr)

node *head, *delnode, *last, *prev;

head = *headptr;

if(head == NULL)

printf("\n circularly linked list is empty..");

return;

else if(head -> link == head)

delnode = head;

head = NULL;

last = head;

while(last -> link != head)

prev = last;

delnode = last;

prev -> link = head;

printf("\n deleted data is....\n"

"\n roll number: %d", delnode -> roll);

printf("\n name: %s", delnode -> name);

*headptr = head;

{ node *head, *delnode, *last, *prev;

int deldata;

head = *headptr;

if(head == NULL)

printf("\n circulary linked list is empty...");

return;

printf("Enter the node roll no for deletion is to be made:");

last = head;

if(head -> roll == deldata)

delnode = head;

if(head -> link == head)

head = NULL;

last = head;

while(last -> link !=head)

head = head -> link;

last -> link = head;

prev = head;

last = head -> link;

while( last != head)

if(last -> roll == deldata)

delnode = last;

prev -> link = last -> link;

break;

prev = prev -> link;

if(last == head)

printf("deleted node is not found");

return;

printf("\nDeleted data is ...\n");

printf("\n roll number: %d", delnode -> roll);

printf("\n name : %s", delnode -> name);

*headptr = head;

return;

node *last;

int moddata;

if(head == NULL)

printf("\ncircularly linked List is Empty");

return;

printf("\nEnter the node rollno for modification:");

last = head;

if(last -> roll == moddata)

printf("\n enter the data of the node:");

printf("\nEnter the new Roll no:");

scanf("%d",&last -> roll);

scanf("%s",last -> name);

return;

}while(last != head);

node *last;

if(head == NULL)

printf("\n circularly linked list is empty");

return;

last = head;

for(;last != head;last = last -> link)

int count = 0;

node *last;

if(head == NULL)

printf("\nCircularly linked List is Empty..");

return count;

for(;head != NULL;head = head -> link)

count = count + 1;

return count;

RESULT:Thus the program for doubly linked list was executed successfully.

Ex. No. 4 IMPLEMENTATION OF STACK USING ARRAYS

To write a program to create, insert, delete and view nodes in the stack-using array.

CONCEPTS:

1. Start the program execution.2. The basic operation performed are

a. Creation of stackb. Push operationc. Pop operationd. Display the stack

3. In creation of a stack a. An array to hold the elements of the stack, which can be of any data types.b. The integer variable to indicate the top position of the stack within array.

4. In push operation a. Create a function push() with one argument, the element to be added.b. Assign the new element in the array by incrementing the TOP variable by 1.

5. In pop operation a. Create a function POP() with one argument, the address of the element to store

the popped value.b. Decrement the TOP variable by 1.

PROGRAM:

RESULT:Thus the program for stack using array was executed successfully.

Ex. No. 5 IMPLEMENTATION OF STACK USING LINKED LIST

To write a program to create, insert, delete and view nodes in the stack-using linked list.

CONCEPTS:

2. The basic operation performed isa. Creation of stackb. Push operationc. Pop operationd. Display the stack.

3. In creation of a stack e. An array to hold the elements of the stack, which can be of any data types.f. The integer variable to indicate the top position of the stack within array.

4. In push operation a. Create a function push () with two argument.b. Create a new pointer to hold the new element. c. Allocate size of the stack node to the new pointer using GETNODE()d. The size of the stack depends on the heap memory is not available.e. Assign the value to the data of new pointer.

5. In pop operation a. Create a function POP() with two argument, the address of the element to store

the popped value.b. Create a temporary pointer to hold the removed element.c. Assign the TOP pointer is made to point the node after the first node, and the

other nodes remain unchanged.d. Free the allocated memory of the temporary pointer by using

RELEASENODE().

PROGRAM:

RESULT:Thus the program for stack using linked list was executed successfully.

Ex. No. 6 IMPLEMENTATION OF QUEUE USING ARRAYS

To write a program to create, insert, delete and view nodes in the queue-using array.

CONCEPTS:

2. The basic operation performed area. Creation of Queueb. Enqueue operationc. Dequeue operationd. Display the queue

3. In creation of a Queue a. An array to hold the elements of the queue, which can be of any data types.b. The integer variable to indicate the top position of the stack within array.

4. In Enqueue operation a. Create a function enqueue() with two argument, the element to be added.b. Assign the new element in the array by incrementing the REAR variable.

5. In Dequeue operation a. Create a function Dequeue() with two argument, the address of the element to

store the dequeued value.b. Decrement the FRONT variable by 1.

PROGRAM:

/* Queue using array */

#include<stdio.h>

#include<stdlib.h>

#include<conio.h>

#define size 5

struct queue

int que[size];

int front,rear;

Qfull()

if(Q.rear >=size-1)

return 1;

return 0;

int insret(int item)

if(Q.front == -1)

Q.front++;

Q.que[++Q.rear] = item;

return Q.rear;

int Qempty()

if(Q.front == -1)|| (Q.front> Q.rear)

return 1;

return 0;

int delete()

int item;

item= Q.que[Q.front];

Q.front++;

printf("\n The deleted item is %d,item);

return Q.front;

RESULT:

Thus the program for Queue using array was executed successfully.

Ex. No. 7 IMPLEMENTATION OF QUEUE USING LINKED LIST

To write a program to create, insert, delete and view nodes in the queue-using linked list.

CONCEPTS:

2. The basic operation performed are Creation of Queue Enqueue operation Dequeue operation Display the queue

3. In creation of a stack An array to hold the elements of the queue, which can be of any data types. The integer variable to indicate the position of the queue.

4. In Enqueue operation Create a function Enqueue() with three argument. Create a new pointer to hold the new element. Allocate size of the stack node to the new pointer using GETNODE() The size of the stack depends on the heap memory is not available. Assign the value to the data of new pointer.

5. In Dequeue operation Create a function Dequeue() with three argument, the address of the element to

store the popped value. Create a temporary pointer to hold the removed element. Assign the FRONT pointer is made to point the node after the first node, and the

other nodes remain unchanged. Free the allocated memory of the temporary pointer by using RELEASENODE

PROGRAM:

/* QUEUE using Linked List */

#include<stdio.h>

#include<stdlib.h>

#include<conio.h>

#define size 5

#include<math.h>

#include<string.h>

//#include<file.h>

typedef struct node

int data;

struct node *next;

Q *front, *rear;

void main(void)

int choice;

void insert();

char ans;

clrscr();

Q.delete();

void display(Q *);

front=NULL;

rear=NULL;

printf("\n Main Menu");

printf("\n1.Insert\n2.Delete\n3.Display");

printf("\ Enter Your Choice");

scanf("%d",&choice);

switch(choice)

case 1: insert();

break;

case 2:

front = delete();

//delete();

break;

case 3:

display(front);

// display();

break;

default: printf("\n u have entered the wrong choice\n");

break;

printf("\n Do u want to continue?\n");

flushall();

ans = getch();

while(ans =='y' || ans == 'Y');

getch();

clrscr();

Q *get_node(Q *temp)

temp= (Q*) malloc(sizeof(Q));

temp->next = NULL;

return temp;

void insert()

char ch;

Q *temp;

clrscr();

temp = get_node(temp);

printf("\n\n Insert the element in the queue");

scanf("%d",&temp->data);

if(front == NULL)

front= temp;

rear=temp;

rear->next=temp;

rear=rear->next;

int Qempty(Q *front)

if(front ==NULL)

return 1;

return 0;

Q *delete()

//void delete()

Q *temp;

temp=front;

if(Qempty(front))

printf("\n\n The Q is enpty");

printf("\n cannot be delete the element");

printf("\n \n The deleted elemnt is %d",temp->data);

front=front->next;

temp->next=NULL;

free(temp);

return front;

void display(Q *front)

//void display()

if(Qempty(front))

printf("\n \n The Q is empty \n");

printf("\n\n The dispaly of Q is \n");

for(;front !=rear->next;front=front->next)

printf(" \t %d",front->data);

getch();

RESULT:

Thus the program for Queue using linked list was executed successfully.

Ex.No.8 IMPLEMENTATION OF DIJIKSTRA’S SHORTEST PATH ALGORITHM

Write a program to find the minimum distance from a node to all other nodes using Dijistra’s algorithm.

CONCEPTS:

2. In each iteration, we choose the minimum distance vertex from all unvisited vertices in the graph.

3. Visited nodes whose minimum distance from source node S is known.

4. Unvisited nodes where we don’t know the minimum distance from vertex S.

5. At each iteration we choose the unvisited node V of minimum distance from the source S, it is marked as visited node.

6. Since we know its distance from S update the distance to any unvisited node from V.

PROGRAM:

/* Djikstra's shortest path algo*/

#include<stdio.h>

#include<conio.h>

#include<ctype.h>

#define max 30

#define UNVISITED -1

#define VISITED 1

#define INFINITY 32767

typedef struct

int previous, len, status;

}node;

int searchpath(int src, int des, int pathmat[max], int *minLen);

void viewadjmat();

void viewpathmat(int pm[max],int n, int len);

int adjmat[max][max], n;

void main()

char ch, s, d;

int i,j,k,src,des,minlen,tot,pathmat[max];

FILE *f1;

printf("\n ENter the no of vertices of weighted graph:");

scanf("%d",&n);

if((f1 = fopen("D:\TURBOC\ASHOK\path.txt","rt")) == NULL)

fprintf(stderr,"cannot open ip file \n");

return;

for(i=1;i<=n;i++)

for(j=1;j<=n;j++)

fscanf(f1,"%d",&adjmat[i][j]);

fclose(f1);

printf("\n The adj matrix is:\n\n");

viewadjmat();

while(1)

printf("\n ENter the Source node:");

fflush(stdin);

printf("\n Enter des node:");

fflush(stdin);

scanf("%c",&d);

src = toupper(s) - 64;

des = toupper(d) - 64;

tot = searchpath(src,des,pathmat,&minlen);

viewpathmat(pathmat,tot,minlen);

printf("\n Do u want to continue (y/n) : ");

ch = getche();

if(ch !='y' && ch != 'Y')

break;

void viewpathmat(int pm[max],int n, int len)

int k;

if(len !=0)

printf("\n minimum length is : %d \n\n Shortest path is :", len);

for(k=n;k>1;k--)

printf("%c -->",pm[k] + 64);

printf("%c\n",pm[k] + 64);

printf("\n distance is: ");

for(k=n;k>1;k--)

printf("%d", adjmat[pm[k]][pm[k-1]]);

printf("\n NO path frm src to des node\n");

void viewadjmat()

int i,j;

printf("\n\n ");

for(i=1;i<=n;i++)

printf("%4c", i+64);

for(i=1;i<=n;i++)

printf("\n");

for(j=1;j<=n;j++)

if(j == 1)

printf("%4c", i+64);

printf("%4d",adjmat[i][j]);

int searchpath(int src,int des, int pathmat[max],int *minlen)

node graph[max];

int i, k, min,tot = 0, curvertex, newlen, u, v;

*minlen = 0;

for(i=1;i<=n;i++)

graph[i].previous = 0;

graph[i].len = INFINITY;

graph[i].status = UNVISITED;

graph[src].previous = 0;

graph[src].len = 0;

graph[src].status = VISITED;

curvertex = src;

while(curvertex !=des)

for(k=1;k<=n;k++)

if(adjmat[curvertex][k] > 0 && graph[k].status == UNVISITED)

newlen = graph[curvertex].len + adjmat[curvertex][k];

if(newlen < graph[k].len)

graph[k].previous = curvertex;

graph[k].len = newlen;

min = INFINITY;

curvertex = 0;

for(i=1;i<=n;i++)

if(graph[i].status == UNVISITED && graph[i].len < min)

min = graph[i].len;

curvertex = i;

if(curvertex == 0)

return 0;

graph[curvertex].status = VISITED;

while(curvertex !=0)

pathmat[++tot] = curvertex;

curvertex = graph[curvertex].previous;

for(i=tot;i>1;i--)

u = pathmat[i];

v = pathmat[i-1];

*minlen = *minlen + adjmat[u][v];

return(tot);

RESULT:

Thus the program to find the minimum distance from a node to all other nodes using Dijistra’s algorithm was executed successfully.

Ex. No. 9 IMPLEMENTATION OF BINARY TREE TRAVERSALS

To write a program to perform inorder, preorder and postorder traversal in binary search tree. CONCEPTS:

2. The basic operation performed are Creation of tree. Preorder traversal Postorder traversal Inorder traversal

3. In Preorder Traversal Process the root node Traverse the left subtree Traverse the right subtree.

4. In Postorder Traversal Traverse the left subtree Traverse the right subtree. Process the root node

5. In Inorder Traversal Traverse the left subtree Process the root node Traverse the right subtree.

PROGRAM:

/* BINARY TREE TRAVERSAL */

#include<stdio.h>

#include<stdlib.h>

#include<conio.h>

#include<alloc.h>

typedef struct node

int data;

struct node *left;

struct node *right;

}tree;

tree *getnode();

void readnode(tree *);

void releasenode(tree *head);

tree *createBTree();

tree *insertnode(tree *btree,tree *temp);

void preorder(tree *btree);

void postrder(tree *btree);

void inorder(tree *btree);

void levelorder(tree *btree);

tree *queue[30];

int front,rear;

int isEmpty();

void enqueue(tree *btree);

int dequeue(tree **dqdata);

void main()

int ch0oice;

tree *btree;

printf("\n Create a new Binary tree \n");

btree = createBTree();

printf("\n TREE TRAVERSAL \n");

printf("\n \n 1.Preorder, \n 2.Inorder, \n 3. Postorder\n");

printf("\n ? ");

scanf("%d", &choice);

if(btree == NULL)

printf("BT is Empty");

return;

switch(choice)

case 1:

printf("\n Preorder");

preorder(btree);

break;

case 2:

printf("\n Inorder");

inorder(btree);

break;

case 3:

printf("\n Postorder");

postorder(btree);

break;

releasenode(btree);

tree *getnode()

int size;

tree *newnode;

size = sizeof(tree);

newnode = (tree *)malloc(size);

return(newnode);

void readnode(tree *newnode)

printf("\n Enter the data");

scanf("%d",&newnode->data);

newnode->left = NULL;

newnode->right = NULL;

void releasenode(tree *head){

free(head);

tree *createBTree()

char ch;

tree *btree = NULL, *temp;

temp = getnode();

readnode(temp);

btree = insertnode(btree,temp);

fflush(stdin);

printf("Do u wish to add data in the tree (y/n)? ");

scanf("%c",&ch);

while((ch == 'Y') || (ch == 'y'));

return btree;

tree *insertnode(tree *btree, tree *temp)

if(btree == NULL)

return temp;

else if(temp->data < btree->data)

btree->left = insertnode(btree->left, temp);

else if(temp->data < btree->data)

btree->right = insertnode(btree->right, temp);

else if(temp->data == btree->data)

printf("\n Data is already Existing");

return btree;

void inorder(tree *btree)

if(btree != NULL)

inorder(btree->left);

printf("%d", btree->data);

inorder(btree->right);

void preorder(tree *btree)

if(btree != NULL)

preorder(btree->left);

preorder(btree->right);

void postorder(tree *btree)

if(btree != NULL)

postorder(btree->left);

postorder(btree->right);

int isempty()

if(front == -1 && rear == -1)

return 1;

return 0;

void enqueue(tree* btree)

{if(isempty())

front = rear = 0;

rear = rear +1;

queue[rear] = btree;

return 0;

int dequeue(tree **dqdata)

if(isempty())

return -1;

*dqdata = queue[front];

if(front == rear)

front = rear = -1;

front = front + 1;

return 0;

RESULT:

Thus the program for Binary Tree Traversal was executed successfully.

Ex. No. 10 IMPLEMENTATION OF INSERTION SORT AND SELECTION SORT

To Write a Program to sort the numbers using insertion sort and selection sort.

CONCEPTS:

2. In Insertion sort Get the numbers from keyboard, which is to be sorted. Each new inserted number is compared with numbers. The number is inserted in proper place by pushing one position to the left or

right. Repeat the step for the newly inserting elements until you get the sorted list.

3. In Selection sort Get the numbers from keyboard, which is to be sorted. Search smallest element in the list. When the element is found, it is swapped with the first element in the list. The second smallest element in the list is then searched. When the element is found, it is swapped with the second element in the list. Repeat the step until you get the sorted list.

PROGRAM:

RESULT:Thus the program for Insertion sort and selection sort was executed successfully.

Ex. No. 11 IMPLEMENTATION OF SHELL SORT, QUICK SORT, AND MERGE SORT

To Write a Program to sort the numbers using shell sort and quick sort, merge sort.

CONCEPTS:

2. In Shell sort Get the numbers from keyboard, which is to be sorted. Each new inserted number is compared only the consecutive elements and

interchanges the elements by only one space. Repeat the step for the newly inserting elements until you get the sorted list.

3. In Quick sort Get the numbers from keyboard, which is to be sorted. Divide the initial unsorted list into two parts, such that every element in the first

list is less than all the elements present in the second list. The procedure is repeated recursively for both the parts, up to relatively short

sequences, which can be sorted until the sequences, reduces to length ones.

4. In Merge sort Get the numbers from keyboard, which is to be sorted. To chop the list into two. If the list has even length, split the list into two equal sub lists. If the list has odd length, divide the list in two by making the first sub list one

entry greater then the second sub list. Then split both the sub lists in to two and go on until each of the sub lists are of

the size one. Finally, start merging the individual sub lists to obtain assorted list.

PROGRAM:

RESULT:Thus the program for Shell sort and Quick sort, Merge sort was executed successfully.

Ex. No. 12 IMPLEMENTATION OF RADIX SORT AND HEAP SORT

To Write a Program to sort the numbers using insertion sort and selection sort.

CONCEPTS:

2. In Radix sort Get the numbers from keyboard, which is to be sorted. The values are successfully ordered on digit positions from right to left. This is accomplished by coping the values into bucket where the index is given

by the position of the digit being sorted. Once all the digit positions have been examined the list must be sorted.

3. In Heap sort Get the numbers from keyboard, which is to be sorted. The values are ordered on digit positions from left to right. Repeat the step until you get the sorted list.

PROGRAM: RESULT:

Thus the program for Insertion sort and selection sort was executed successfully.

ds lab manual[1]

Documents

ds lab manual(b.e)

ds-i lab manual print

lab manual ds and oops

cse-ds lab manual(cs2208)_1

ds & oops (6312) lab manual

ds(csc-214) lab mannual for students

ds-4 / ds-10 operation manual

ds with c c++ lab manual vtu

ampelografie ind metod lab ds

new ds lab manual

oops & ds virtual lab

final 1st year c&ds lab manual (a.y.2011-12)

deepaoop ds lab manual

data structures through c++ lab...

chimie analitica indr lab ds

ds lab handouts

televiziune sisteme video indr metd lab ds

ds lab programs 12 and 14

ds lab manual

ds lab programs