download file - thin clients | zero clients | 10zig

NOS V10 User Guide

About This Guide Thank you for choosing from the 10ZiG Technology series of zero clients which are specifically

designed for power users in an office environment. They feature a powerful, yet simple and

affordable solution to virtual desktop computing in a fashionable and sleek design.

In this User Guide, you will find everything you need to quickly begin using your new device.

Please be sure to verify with your network administrator that your network is prepared for the

configuration of your new device.

Declaration of Conformity

It is hereby declared that this device is in conformity with the essential requirements, and other

relevant provisions of the CE and the FCC.

CE Mark Warning

This is a class B device, in a domestic or office environment. This product may

cause radio interference, in which case the user may be required to take adequate

measures.

Waste Electrical and Electronic Equipment (WEEE) Warning

To potentially avoid adverse effects on the environment, and human health, as a

result of the presence of hazardous substances in electrical and electronic

equipment, end users of electrical and electronic equipment should understand the

meaning of the crossed-out wheeled bin symbol. Do NOT dispose of WEEE as

unsorted municipal waste as municipalities must collect WEEE separately.

10ZiG Technology | US P: (866) 865-5250 E: info@10ZiG.com | EMEA P: +44 (0) 116 214 8650 E: info@10ZiG.eu

Table of Contents About This Guide ..................................................................................................................... 2

Getting Started ......................................................................................................................... 3

Packing List ......................................................................................................................................... 3

Initial Hardware Setup ....................................................................................................................... 3

Support ..................................................................................................................................... 4

Serial Number ....................................................................................................................... 5

Introduction .......................................................................................................................................... 6

Initial Setup .............................................................................................................................. 6

NOS for VMWare ................................................................................................................... 7

General Options ................................................................................................................................. 7

Imprivata .............................................................................................................................................. 8

Login Options ...................................................................................................................................... 9

PCoIP ................................................................................................................................................. 10

Advanced Options ............................................................................................................................ 11

NOS for Citrix .......................................................................................................................13

General Settings ............................................................................................................................... 13

Logoff Action ..................................................................................................................................... 16

Imprivata OneSign ........................................................................................................................... 17

Login ................................................................................................................................................... 18

Proxy .................................................................................................................................................. 19

Advanced ........................................................................................................................................... 20

Reconnection .................................................................................................................................... 22

Shutdown / Reboot .................................................................................................................23

Settings....................................................................................................................................24

Smart Card Utility ................................................................................................................25

Network ................................................................................................................................26

Wireless Network Connection (Additional Hardware Opt.) ........................................................ 27

Display .................................................................................................................................31

Dual Monitors .................................................................................................................................... 32

Display - Advanced Tab .................................................................................................................. 34

Smart Card Device ...............................................................................................................35

Keyboard ..............................................................................................................................36

Sound Configuration ...........................................................................................................38

USB Devices ........................................................................................................................39

Mouse ...................................................................................................................................40

Printers .................................................................................................................................41

Printer Configuration Wizard .......................................................................................................... 42

Configuring Local USB Printer ....................................................................................................... 42

Configuring a Network Printer ........................................................................................................ 43

Security ................................................................................................................................45

10Zig Cloud Manager ..........................................................................................................46

System .................................................................................................................................47

General .............................................................................................................................................. 47

Performance ...................................................................................................................................... 48

Packages ........................................................................................................................................... 48

Advanced ........................................................................................................................................... 49

VNC Shadowing ...................................................................................................................50

Time & Date..........................................................................................................................51

Clock Tab........................................................................................................................................... 51

Time Zone Tab ................................................................................................................................. 52

Time Server Tab ............................................................................................................................... 52

Certificates ...........................................................................................................................53

Importing Certificates ....................................................................................................................... 53

Log .......................................................................................................................................60

Getting Started

Packing List

The following components are included in the package:

• Zero client Device

• Stand

• 12 VDC Power Adapter with Cord

Optional equipment that may be included:

• USB Wheel Mouse

• USB to PS2 Adapter

• SVGA to DVI Adapter

• Monitor Mount Kit (may include optional video cable)

• SVGA and DVI splitter cable

• Wireless Network Adapter and Antenna

• Quick Installation Guide & Management Software CD

Check this list before installation to ensure that you have received each item ordered. If you are

missing any items, please contact technical support.

Initial Hardware Setup

To setup the device for initial use：

▪ Attach the Stand (if desired)

▪ Connect a Keyboard, Monitor and Mouse

▪ Connect to a Network and a Power Source

Support If you require support for your Linux-based zero client, please contact your region’s nearest

Technical Support Center. While 10ZiG Technology does provide technical support for its Linux-

based zero clients, it does not provide support for the Linux operating system or application

components that are obtained from the open source community and that may be included as

part of the software image installed.

10ZiG Technology Limited

Headquarters US

23309 N 17th Dr - Ste 100

Phoenix, AZ 85027

Phone 866-864-5250 • Fax 623-516-8697

support@10zig.com

sales@10zig.com

www.10zig.com

Headquarters UK

10ZiG Technology Limited

Unit S2, Troon Way Business Centre

Humberstone Lane

Leicester

LE4 9HA

Phone +44 (0)116 2148650 • Fax +44 (0)116 2148651

support@10zig.eu

sales@10zig.eu

www.10zig.eu

Serial Number

Each zero client has a unique serial number which is labeled as ID CODE: followed by the MAC

address of the unit. The sticker with this information may be found either on the side, bottom,

near the video output port or on a slide out tab on the back of the unit, depending on which

model you have. Please have this number available when contacting 10ZiG Technology’s

Technical Support for assistance. You may also find this number in the 10ZiG Manager or while

on the unit itself click on the Settings Button … Network> Local Area> Status… labeled

Physical Address.

Introduction

This section provides the user with instructions for the hardware configuration of the Linux-

based zero client and explains the various utilities used to accomplish these tasks. Typically, a

zero client is configured locally and then used as a template to configure other units. These

saved configuration templates may then be pushed out to additional zero clients using the

optional 10ZiG Server Manager which can be found at http://www.10zig.com/manager .

Initial Setup Upon Initial boot up you will be prompted to select your country, time zone and set the time and

NOS Versions

NOS for VMWare

General Options

After the initial setup you will immediately be prompted to enter your VMWare Information.

• Server address: Network address for your VMWare server or StoreFront.

• Desktop: To create a seamless login process enter in the name of the VM environment you would like to connect to.

• Reconnect Session: Enable for automatic reconnection when session is disconnected.

• Reconnect Timer: The interval you would like the session attempt to reconnect (in seconds).

Imprivata

This screen is utilized to turn of the Imprivata login integration if you are utilizing its login

authentication services.

Login Options

In the Login portion of the setup you can set specified to login automatically by simply placing a check mark in the Use Credentials Box. Then simply input the Credentials in the needed fields.

• Use SCLogin: Selected in order to use a Smart Card Login.

• Kiosk Mode: Opens the session in a seamless interface automatically so user interface is not required as well as hides the menu bar.

Under PCoIP you can configure settings specifically for your Interface needs including FIPS Mode.

Advanced Options

The Advanced section of the Setup allows some more additional customizations.

• Preferred Protocol: You can specify the communication protocol you use to connect to your VM.

• Sound Connection: Allows the redirection of the VM sound to your Local 10Zig Unit.

• RDP Experience: Allows you to designate the expected type of bandwidth connection.

• USB Log: Enables Logging of connected USB devices to your 10Zig Unit.

• Show Menu Bar: Allows the viewing of VMWare Menu Bar during session.

NOS for Citrix

General Settings

You now have three ways to connect under the Connection Type dropdown: HTTP/HTTPS,

StoreFront, and Java.

• Server Address: Enter in the IP or web server address of the Citrix server.

• Hide Decorations: Removes the Menu Bar.

• Debug Output: Adds Debug to logs.

When the HTTP/HTTPS or Java connection type is selected, you will be presented with the

NOS interface. Click on the Citrix icon to launch the storefront. Input valid username,

password, and domain to connect.

When the StoreFront connection is enabled the Citrix Login dialog box will appear.

After entering valid credentials, the NOS Storefront interface will appear (shown below). The dropdown allows the user to select the application or desktop. The button to the right of the dropdown is for Logon or Logoff. The credentials from the login are passed through, no need to reenter credentials.

When logged off, the button on the bottom right is used to log back into Storefront.

Logoff Action

Here you can select how your zero client behaves when the user logs off the Citrix session.

• Web Restart: When the user disconnects form the Citrix session only the Citrix Store Web will be restarted.

• Reboot on Logoff: When the user disconnects form the Citrix session the unit will reboot.

• Shutdown on Logoff: When the user disconnects for the Citrix session the unit will shutdown.

Imprivata OneSign

Imprivata OneSign incorporates single sign-on, authentication, management, and virtual desktop roaming. For more information please go to https://www.imprivata.com.

• Use Imprivata: Enables the Improvata Single Sign On.

• Reject untrusted: Enable to abort connection if the server certificate is not validated.

• Imprivata Debug: Enables Debug Log.

Here you can save the user credentials on the Zero Client so the user just needs to press the connect button to start the session. Any text entered in will show in the login prompt by default.

• Use SClogin: Enable to Login with a Smart Card.

If your network is set to use a Proxy here is where you will enter in the connection information.

• Use Proxy: Enables Proxy connection.

• Type: Select from using HTTP or SOCKS v5.

• Proxy Host: Enter in the proxy host IP or hostname.

• Proxy Port: Assign port number.

• Proxy Username: Auto fill Username.

• Proxy Password: Auto fill Password.

• Proxy Exclusion List: If you have multiple proxies use a comma to separate the exclusion list.

• Use Proxy for Flash: Enable to use the proxy for Flash redirection.

Advanced

• Font Smoothing: Enables the quality of displayed fonts beyond that available through traditional font smoothing or anti-aliasing.

• HDX Flash Redirection: Set to Always, Ask or Disable.

• HDX Server Fetching: Enables client side Content Fetching.

• HDX Client Caching: Content obtained through server-side fetching is cached on the user device and stored from session to session.

• Client Audio: Allows for the configuration of client audio within an ICA session.

• Speed Screen: Enables SpeedScreen Latency Reduction.

• Enable OSS: Allows off-screen drawing surfaces to be used when constructing the image to be displayed. This reduces flicker.

• Session Reliability: Establishes an ICA session on TCP port 2598 (instead of port 1494) when connecting to Presentation Server.

• Scrolling Delay: Set scrolling delay in msec. Set to a larger value to prevent over scrolling.

• Disable XRender: Disables XRender.

• CDROM for XenAPP: Allow automatic connection of CD-ROM drives.

• Show Connection Bar: Enable to show connection bar.

Reconnection

Enable Reconnection: Enables auto-reconnection when the session has ended. Reconnection Delay: Time in seconds till the next attempt to connect. Reconnection Retires: Number of attempts the unit will make to reconnect.

Shutdown / Reboot To Shutdown or Reboot select the Shutdown Button from the initial screen.

From here select your desired Shutdown option.

Settings From the Login Prompt Click on Settings…

Smart Card Utility

With this Utility you can Read/Write/Clear any Smart Card with a SmartCard

reader. You then input and write credentials and access to a designated card.

Network

Here you will find options to configure your network settings. If only one type of connection is available, it will be automatically set to Default.

Wireless Network Connection (Additional Hardware Opt.)

Open the Network Configuration applet by double clicking on the Network Icon, now click the

Add button and the Wireless Connection properties will open, click the refresh button to see a

list of Broadcasted SSID in your environment, choose the wireless access point you would like

to connect to and then click the ok button.

You will now see the wireless network settings, from the security tab choose your Security Mode

from the dropdown list and type in your passphrase (if applicable to your security mode choice).

If you uncheck the box next to passphrase your passphrase will be shown in plain text.

From the TCP/IP Properties Tab you can set a static IP address if used in your environment,

and also use specific DNS server addresses.

Using the Hosts tab you can define the host list for the wireless connection. Once you have

your wireless options set, click on the ok button.

Display

The Display Settings window allows you to configure your screen resolution along

with the refresh rate and the color quality. Other options here include rotation and

support for multiple displays, if detected.

Dual Monitors

When multiple displays are detected, you will be given the option to select Make this my main

display for either DVI-1 or DVI-2, and to Duplicate or Extend these displays

You can change the resolution of each monitor by selecting the resolution you want for DVI-1

and DVI-2.

If you choose to extend these displays you can choose the position of the 2nd monitor to Right,

Left, Above or Below depending on how you wish your display topology to be.

Display - Advanced Tab

Clicking the Advanced button will open the window with options to enable Power Saving-DPMS

settings. Here you may configure the timers for each desired instance. You can also enable or

disable.

Smart Card Device

This service allows you to Enable or Disable your Smart Card Service and

Reader Device.

Keyboard

Opening the Keyboard window displays the Layout Tab which allows you to

select the keyboard model and country layout, as well as test keystroke output in

the Test Keyboard: dialog box.

You can also set the keyboard character repeat rate and repeat delay, and the enable numlock

at startup by using the checkbox in the Type Settings Tab

Sound Configuration

The Sound window allows you to control the speaker (Output:) and microphone

(Input:) volumes, and tells what Audio device is being used.

USB Devices

USB Devices for VMWare and Citrix may be controlled here. Options are Default,

Include or Exclude. NOTE: When a USB printer or USB storage device is

connected to the zero client, the VM (Virtual Machine) will recognize the USB

device and indicate that new hardware has been found. For printers, the printer

driver must be installed on the VM in order for it to work correctly.

Opening the Mouse Configurations applet, currently only USB and PS2 mice

are supported. The Type option is automatically detected at system boot with no

ability to change it. The Mouse window allows you to set the mouse speed, and

acceleration settings. You may also configure the mouse buttons for 3 button

emulation or for left-handed users.

Printers

The Printers applet allows you to add a local or network printer and to export a

default printer to a terminal server.

Printer Configuration Wizard

Click on the Add Printer icon and you will be given the following screen.

Configuring Local USB Printer

If installing a local printer attached to the zero client keep the radio button on local printer

attached to this zero client. If using CUPS, determine the driver you want to use. If you are

using a Windows Driver on the host side you will need to put in the Name of the Driver on your

VM or Citrix Host for that designated printer and then click Next, confirm all the Settings Info and

then Click OK.

Configuring a Network Printer

If adding a network printer Select the LPD/LPR Printer Radio Button or RAW Printer to choose

the protocol your network printer uses. Proceed with providing the printer a name. You will also

need to provide the printer address or network name and again designate the CUPS driver and

Windows driver used on your host.

Enter the name or IP address of your network printer and whether to connect via LPD/LPR or

the RAW protocol, enter in the queue name or port depending on connection type and click

Confirm all the settings info and then click OK.

Security

Security Settings allows administrators to require a password to modify the settings.

You can also enable installation from USB Mass Storage for thumb drives or

external USB drives. This is also where you can enable the SSH Client option.

10Zig Cloud Manager

10ZiG Cloud Management Agent allows you to use our Cloud Manager

technology to manage your devices.

By default, the 10ZiG Cloud Management Agent is enabled, but does not contain any address

or port information. To begin using the Cloud Agent, simply fill in the server and port information

and click the OK button, and the Agent will check in with the 10ZiG Manager.

System

General

The General option will allow administrators to identify the product name, the

firmware version, the applied template (if any), and the name of the unit. The

name can be easily changed by using the Change Name button.

Performance

The Performance section allows you to define a Remote Performance Monitoring server, if

desired.

Packages

Selecting Packages will show the currently installed Linux packages on the unit.

Advanced

The Advanced options allow you to view more detailed info about the unit. Including CPU, HD

size, RAM, Firmware and Kernel. You can also set the unit back to factory defaults, as well as

launch a Linux console screen.

VNC Shadowing

Here you may edit the settings used to remotely connect to the unit using VNC

(Virtual Network Computing). Options include whether or not to prompt the user

for permission to connect to the unit, and the option to password protect any

connection from a remote source.

Time & Date

The Date and Time applet allows administrators to set the current time and date,

time zone and if an NTP time server will be used.

Clock Tab

The Clock tab, allows you to set the current time and date (Note you must hit Apply after setting

the time and date).

Time Zone Tab

The Time Zone Tab allows you to set your current time zone.

Time Server Tab

The time server tab allows you to sync your unit with an NTP server either internal or external.

You just need to click the box labeled Use time server and enter the server name or IP address

(Note: you must have internet access to use an external time server).

Certificates

The Certificates applet opens the Certificate Manager and allows administrators

to delete or show the certificates that are currently installed on your NOS Unit.

Importing Certificates

You can import Certificates to your units two ways, via USB or the 10Zig Manager. The imported certificate needs to be in a .crt or .pem format. In Security Settings Enable Installation from USB.

To import a certificate, insert a USB drive (Formatted to FAT32) into the unit that contains the certificate file in the root directory. This will automatically open the USB Installer window. Here you may select the certificate(s) you would like to import into the unit.

When finished, you will need to reboot the unit to view the newly imported certificate(s).

After the certificates are imported click on the Manage button. Any CA certificates will be imported in the Authorities tab.

Click on the certification to highlight it and click on Edit Trust to verify the Trust settings.

To add the server certificate click on the Server tab and then click on Import.

You will find the certificates in the directory etc/ssl/certs. Highlight the server certificate and click open to import it.

Selecting a Log file from the left pane will enable you to view it in the right pane.

To use the Send Log your device will need to be connected to the Internet to

upload the logs so your support technician can access the logs. Once you are

viewing the Log you would like to send, click the Send Log button and it will be

automatically uploaded to 10ZiG.

For more information, FAQs, and helpful hints, please browse to

http://faq.10zigsupport.com.

download file - thin clients | zero clients | 10zig

Documents

how 10zig thin and zero clients improve citrix vdi...

web thin clients for remote access with indusoft web ... ·...

thin clients zero clients pcoip solutions · 2020. 9....

thin clients zero clients pcoip solutions · looked at wyse...

arista thinmanagerready thin clients

10zig peakos user guide

wyse x class mobile thin clients

(thin clients) compatibility guide - vmware - official ·...

10zig manager cloud setup guide€¦ · 10zig manager cloud...

admin hp thin clients

ubuntu thin clients - ubuntu hardware debugging

vendor landscape: thin clients

customer story - 10zig

imprnt systems cctv thin clients

why 1ozig? office & remote thin clients zero clients …

wyserclass thin clientswyser class thin clients....

fat & thin clients in education

hp thin client portfolio customer presentation · low cost,...

hp thin clients

thin clients zero clients pcoip solutions · thin clients...