disassembly instructions for shoe cage unit
Post on 14-Apr-2017
92 Views
Preview:
TRANSCRIPT
DISASSEMBLY INSTRUCTIONS FOR SHOE
CAGE UNIT.
Frank J Attilio
Step 1 – Remove plexi inlays.
Safely put your fingers under the inlays and lift up. You will have to tilt the unit to remove the bottom inlays.
Frank J Attilio
Step 2 – Turn the unit on to its side for a more safe disassembly.
Frank J Attilio
Step 3 – Remove screws from stretchers.
USING A PHILLIPS HEAD SCREW DRIVER REMOVE THE SCREWS AND SAVE THEM.
Frank J Attilio
Step 4 – Safely Remove the End panels from the stretchers.
LIFTING EVENLY ON BOTH THE TOP AND BOTTOM ENDS OF THE END PANEL SAFELY REMOVE FROM STRETCHERS.
Frank J Attilio
Step 5 – Remove the unscrewed stretcher from the end panel.
LIFT UP THE STRETCHERS.
Frank J Attilio
Repeat steps 2-5 for the remaining sections until the unit is completely
disassembled.
Frank J Attilio
top related