couplings, fittings, valves and accessories · pdf filesection 5 – vicflex™...
Post on 16-Mar-2018
319 Views
Preview:
TRANSCRIPT
VICTAULIC® LOCATIONS
UNITED STATES ANDWORLD HEADQUARTERS4901 Kesslersville RoadEaston, PA 18040 USA1 800 PICK VIC1 800 742 5842(within North America)1 610 559 3300pickvic@victaulic.com
victaulic.com
MEXICO BRAZILCalle Circuito del MarquesNo 8 al 11Parque Industrial El MarquesMunicipio El MarquesQueretaro, MexicoCP 8624652 442 253 0066vical@victaulic.com
Av. Marquês de São Vincente446 Cj 1303Várzea da Barra Funda –São Paulo-SPCEP 01139-000 – Brazil55 11 3548 4280vicbr@victaulic.com
Effective April 1, 2017
victaulic.com
FIRE PROTECTION PRICE LIST
FIRE PROTECTION PRICE LIST
PL2017-FP 10678 REV A 04/2017VICTAULIC AND ALL OTHER VICTAULIC MARKS ARE THE TRADEMARKS OR REGISTERED TRADEMARKS OF VICTAULIC COMPANY, AND/OR ITS AFFILIATED ENTITIES, IN THE U.S. AND/OR OTHER COUNTRIES. © 2017 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
FIRE PROTECTION PRICE LISTPL2017-FP Effective April 1, 2017
COUPLINGS, FITTINGS, VALVES AND ACCESSORIES COUPLINGS, FITTINGS, VALVES AND ACCESSORIES
SECTION 1 – FireLock™ and Fire Protection ProductsStyle 009N FireLock EZ™ Rigid Coupling
Style 005 FireLock™ Rigid Coupling
FireLock™ Installation-Ready™ Fittings FireLock™ and Standard Fittings Style 744 FireLock™ Flange Adapter
No. 67 End of Run Fitting
No. 10-DR Drain Elbow
Series 728 FireLock™ Grooved End Ball Valve
Series 705 FireLock™ Butterfly Valve – Supervised OPEN
Series 707C FireLock™ Butterfly Valve – Supervised CLOSED
Series 765 FireLock™ High Pressure Butterfly Valve – Supervised OPEN
Series 766 FireLock™ High Pressure Butterfly Valve – Supervised CLOSED
Series 771 OS&Y and Series 772 NRS Gate Valves
Series 773 and Series 774 Post Indicators
Supervisory Switches Series 717H and 717 FireLock™ Check Valves
Series 722 FireLock™ Threaded Ball Valve
Series 732H FireLock™ Wye-Type Vic-Strainer
Style 720 Alarm Test Module
Series 747M FireLock™ Commercial Zone Control Riser Module
Series 247 FireLock™ Residential Zone Control Riser Module
Style 735 FireLock™ Fire Pump Test Meter
FireLock™ Innovative Groove SystemSECTION 2 – Victaulic® Hydraulic Control Valves
Series 867-7UL Pressure Reducing Valve
Series 867-4UF Pressure Relief Valve
Series 867-7UF Pressure Relief Valve
Series 867-400 Pressure Reducing Valve
Series 867-459 Pressure Relief Valve
Series 867-759 Pressure Relief Valve
BERMAD FP-436 BERMAD Differential Pressure Sustaining Valve
Series 867-460 Differential Pressure Sustaining BERMAD Valve
Series 866-465 Level Control BERMAD Valve
Series 866-466 Level Control BERMAD Valve
Series 866-480 Level Control BERMAD Valve
Series 866-482 Level Control BERMAD Valve
Victaulic® BERMAD Technologies Accessories
SECTION 3 – Hole Cut ProductsStyle 920/920N Mechanical-T Outlet
Vic-Tap II Style 920/920N Mechanical-T Cross
Style 922 Outlet Tee
Style 923 Strapless Outlet
SECTION 4 – Couplings, Spare Parts and FittingsStyle 07 Zero-Flex™ Rigid Coupling
Style 177N QuickVic™ Flexible Coupling for Steel
Style 77 Standard Coupling
Style 75 Flexible Coupling
Style 750 Reducing Coupling
Spare Parts IPS Size Grooved End Fittings
SECTION 5 – VicFlex™ Stainless Steel Sprinkler FittingsSeries AH1 Hose Series AH2 Hose Series AH2-300 Hose Series AH2-CC HoseSeries AH5 Hose VicFlex™ Brackets VicFlex™ Reducers and End Fittings VicFlex™ Preassembled System Order Form V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form
V36 Dry Sprinkler with Style AB6 Accessories Series AQC For Clean Room Applications
Series AQD For Duct Systems
I
IndexIN
dE
x
VICTAULIC.COM PL2017-FP
SECTION 6 – Vic-Press™ System for Schedule 10S Stainless Steel Pipe
Vic-Press™ – Press System for Schedule 10S, Type 304 Stainless Steel Piping
Vic-Press™ – Press System for Schedule 10S, Type 316 Stainless Steel Piping
SECTION 7 – Pipe Preparation ToolsVE12 Groove-In-Place
VE26 S/C Groove-In-Place
VE26/VE46 Power Drive Kit
VE46 Groove-In-Place
VE226 B/S/M/C Portable Grooving Tool
VE226 Power Drive Kit
VE106 Groove-N-Go
VE272SFS Field Roll Grooving Tool
VE268 Shop Fabrication Grooving Tool
VPD752 Victaulic Power Drive
VAPS 112 Pipe Stand
VHCT 900 Hole Cutting Tool
HCT908 Hole Cutting Tool
PFT510 Vic-Press™ Tool for Schedule 10S Stainless Steel Pipe
NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.
Submitted By: __________________________________ Date: __________________________________
Approved By: ___________________________________ Date: __________________________________
VICTAULIC.COM PL2017-FPII
IndexIN
dE
x
Table of contents
Gasket Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSECTION 1 – FireLock™ and Fire Protection Products 1-1Style 009N FireLock EZ™ Rigid Coupling . . . . . . . . . . . . . . . 1-2Style 005 FireLock™ Rigid Coupling . . . . . . . . . . . . . . . . . . . 1-2FireLock™ Installation-Ready™ Fittings . . . . . . . . . . . . . . . . 1-4
No. 101 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4No. 103 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4No. 102 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4No. 143 Close Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
FireLock™ and Grooved IPS Pipe Fittings – . . . . . . . . . . . . . 1-6No. 001 – 90° FireLock™ Elbow . . . . . . . . . . . . . . . . . . . 1-6No. 003 – 45° FireLock™ Elbow . . . . . . . . . . . . . . . . . . . 1-6No. 10 - 90° IPS Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6No. 11 - 45° IPS Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6No. 002 – FireLock™ Tee . . . . . . . . . . . . . . . . . . . . . . . . .1-7No. 006 – FireLock™ Cap . . . . . . . . . . . . . . . . . . . . . . . . .1-7No. 20 IPS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7No. 60 IPS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7
Style 744 FireLock™ Flange Adapter . . . . . . . . . . . . . . . . . . . 1-8Flange Adapter Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8No. 67 End of Run Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9No. 10-DR Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9Series 728 FireLock™ Ball Valve . . . . . . . . . . . . . . . . . . . . . . 1-9Series 705 Butterfly Valve – Supervised OPEN . . . . . . . . . . .1-11Series 705 Weatherproof Actuator Replacement Kit . . . . . . . .1-11Series 707C Butterfly Valve – Supervised CLOSED . . . . . . . .1-12Series 765 High Pressure Butterfly Valve –
Supervised OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12Series 766 High Pressure Butterfly Valve –
Supervised CLOSED . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13Series 771 OS&Y and Series 772 NRS Gate Valves . . . . . . . .1-14Flange Mounting Kits – Series 772H NRS . . . . . . . . . . . . . . .1-14Series 773 and Series 774 Post Indicators . . . . . . . . . . . . . .1-15Supervisory Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15Series 717H FireLock™ Check Valve . . . . . . . . . . . . . . . . . . .1-15Series 717 FireLock™ Check Valve . . . . . . . . . . . . . . . . . . . .1-16Series 722 Threaded Ball Valve . . . . . . . . . . . . . . . . . . . . . . .1-16Series 732H FireLock™ Wye-Type Vic-Strainer . . . . . . . . . 1-17Series 720 Alarm Test Module . . . . . . . . . . . . . . . . . . . . . . .1-17Series 720 Alarm Test Module with Gauge Port Tap . . . . . . .1-18Series 720 Alarm Test Module
with Pressure Relief Option . . . . . . . . . . . . . . . . . . . . . .1-18Series 720 Alarm Test Module
With Pressure Relief and Gauge Port Options . . . . . . . . .1-18Series 720 Replacement Pressure Relief Valve Kit . . . . . . . .1-19Series 747M Commercial Zone Control Riser Module . . . . . . .1-19Series 247 Residential Zone Control Riser Module . . . . . . . . .1-19Pressure Relief Valve Kit for Series 747M and 247 . . . . . . . . 1-20Series 735 Fire Pump Test Meter . . . . . . . . . . . . . . . . . . . . .1-21FireLock™ IGS Groove System . . . . . . . . . . . . . . . . . . . . . . 1-22
No. 142 Welded Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . 1-22Style 922 Outlet-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
No. 145 90° Female Threaded x Groove Elbow . . . . . . . 1-22No. 140 Male Threaded x Groove Adapter . . . . . . . . . . . 1-22No. 141 Female Threaded x Groove Adapter . . . . . . . . . 1-23Series 147 End Cap Assembly . . . . . . . . . . . . . . . . . . . . 1-23
SECTION 2 – Victaulic® Hydraulic Control Valves 2-1Victaulic® Hydraulic Control Valves . . . . . . . . . . . . . . . . . . . . 2-2Series 867-42T Pressure Reducing Valve . . . . . . . . . . . . . . . 2-3Series 867-7UL Pressure Reducing Valve . . . . . . . . . . . . . . . 2-3Series 867-43T Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-4Series 867-4UF Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-4Series 867-7UF Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-4Series 867-400 Pressure Reducing Valve . . . . . . . . . . . . . . . 2-5Series 867-459 Pressure Relief Valve
with Electric Override . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5Series 867-759 Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-5BERMAD FP-436 Differential Pressure Sustaining Valve . . . . 2-6Series 866-460 Level Control BERMAD Valve
with Modulating Horizontal Float . . . . . . . . . . . . . . . . . . .2-7Series 866-465 Level Control BERMAD Valve
with Bi-Level Electric Float . . . . . . . . . . . . . . . . . . . . . . . .2-7Series 866-466 Level Control BERMAD Valve
with Vertical Float . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8Series 866-480 Level Control BERMAD Valve
with Altitude Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8Series 866-482 Level Control BERMAD Valve
with Altitude Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8Victaulic® Hydraulic Control Valve Accessories . . . . . . . . . . . 2-9SECTION 3 – Hole Cut Products 3-1Styles 920/920N Mechanical-T Outlet . . . . . . . . . . . . . . . . . . 3-2Vic-Tap II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4Styles 920/920N Mechanical-T Cross . . . . . . . . . . . . . . . . . . 3-5Style 922 Outlet Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Style 923 Strapless Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8SECTION 4 – Couplings, Spare Parts and Fittings 4-1Style 07 Zero-Flex™ Rigid Coupling . . . . . . . . . . . . . . . . . . . 4-2Style 177N QuickVic Flexible Coupling for Steel . . . . . . . . . . . 4-2Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . 4-3Style 75 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 4-4Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Metal Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . 4-7Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Elbows – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
No. 12 - 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8No. 13 - 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8No. 100 and No. 110 1Z\x D Long Radius Elbows . . . . . . . 4-8
No. 29M Tee with Threaded Branch . . . . . . . . . . . . . . . . . . . 4-9No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9No. 33 True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9No(s). 40, 42, and 43 Adapter Nipples . . . . . . . . . . . . . . . . .4-10No. 80 Female Threaded Adapter . . . . . . . . . . . . . . . . . . . . .4-10
III
Table of ContentsTA
BLE
OF C
ON
TENTS
VICTAULIC.COM PL2017-FP
No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . .4-11No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . 4-12No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . .4-14No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . .4-15No. 50 Concentrc Reducers, No. 51 Eccentric Reducers . . .4-16No. 52 Reducer – Male Threaded Small End . . . . . . . . . . . . 4-18SECTION 5 – VicFlex™ Sprinkler Fitting Systems 5-1Series AH1 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH2 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH2-300 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH3 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH2-CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Series AH5 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3VicFlex™ Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4VicFlex™ Reducers and End Fittings . . . . . . . . . . . . . . . . . . . 5-4VicFlex™ Preassembled System Order Form . . . . . . . . . . . . . 5-4V36 Dry Sprinkler with Integral Style AB6
Assembly Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5V36 Dry Sprinkler with Style AB6 Accessories . . . . . . . . . . . . 5-7Series AQC-U for Clean Room Applications . . . . . . . . . . . . . . 5-7Series AQD For Duct Systems . . . . . . . . . . . . . . . . . . . . . . . . 5-7VicFlex™ Dry Sprinkler Model VS1 . . . . . . . . . . . . . . . . . . . . 5-8Model VS1 Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8VicFlex™ Dry Sprinkler Brackets . . . . . . . . . . . . . . . . . . . . . . 5-9SECTION 6 – Vic-Press™ System, for Schedule 10S Stainless
Steel Pipe 6-1Vic-Press 304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Seal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Style P500 Loose Seals . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Style P597 Standard Coupling . . . . . . . . . . . . . . . . . . . . . 6-3Style P596 Male Adapter – Threaded . . . . . . . . . . . . . . . . 6-3Series P569 Type 316 Stainless Steel Ball Valve . . . . . . . . 6-4Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . 6-4Style P586 90° Elbow – Short Tangent . . . . . . . . . . . . . . 6-4Style P542 90° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 6-5Style P591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Style P543 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 6-5Style P592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Style P593 Tee – Reducing Branch . . . . . . . . . . . . . . . . . 6-6Style P588 Tee – Reducing Branch – Threaded . . . . . . . . 6-6Style P594 Concentric Reducer . . . . . . . . . . . . . . . . . . . . 6-7Style P595 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 6-7Style P565 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 6-7Style P587 Transition Nipple . . . . . . . . . . . . . . . . . . . . . . 6-8Style P584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 6-8Style P599 Female Adapter – Threaded . . . . . . . . . . . . . . 6-8Style P561 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9Style P540 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9PFT510 Vic-Press Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Vic-Press 316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10Seal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10Style P500 Loose Seals . . . . . . . . . . . . . . . . . . . . . . . . . .6-11
Style P507 Standard Coupling . . . . . . . . . . . . . . . . . . . . .6-11Style P576 Male Adapter – Threaded . . . . . . . . . . . . . . . .6-11Style P508 Slip Coupling . . . . . . . . . . . . . . . . . . . . . . . . 6-12Series P569 Stainless Steel Ball Valve . . . . . . . . . . . . . . 6-12Series P569 Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . 6-13Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . 6-13Style P568 90° Elbow – Short Tangent . . . . . . . . . . . . . 6-13Style P562 90° Street Elbow . . . . . . . . . . . . . . . . . . . . . 6-13Style P571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14Style P563 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . .6-14Style P572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14Style P573 Tee – Reducing Branch . . . . . . . . . . . . . . . . 6-15Style P578 Tee – Reducing Branch Threaded . . . . . . . . 6-15Style P574 Concentric Reducer . . . . . . . . . . . . . . . . . . . 6-15Style P575 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . .6-16Style P566 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . .6-16Style P577 Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . .6-16Style P585 Threaded Union . . . . . . . . . . . . . . . . . . . . . . .6-16Style P579 Female Adapter – Threaded . . . . . . . . . . . . . .6-17Style P560 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-17PFT510 Vic-Press Tool . . . . . . . . . . . . . . . . . . . . . . . . . . .6-17
Section 7 – Pipe Preparation Tools 7-1Vic-Easy Roll Grooving Tools – Field Portable. . . . . . . . . . . . . .7-2
VE12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2VE26 S/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2VE26/VE46 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . .7-2VE46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . 7-3VE226 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Vic-Easy Roll Grooving Tools – Field Fabrication . . . . . . . . . . 7-4VE106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4VE272SFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Vic-Easy Roll Grooving Tools – Shop Fabrication . . . . . . . . . . .7-7VE268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7
Vic-Easy Tool Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8VPD752 Victaulic Power Drive . . . . . . . . . . . . . . . . . . . . . 7-8VAPS112 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Hole Cutting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9VHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Vic-Press™ Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PFT510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10Terms and Conditions of Tool Rental . . . . . . . . . . . . . . . . . . .7-10Terms and Conditions of Tool Sale . . . . . . . . . . . . . . . . . . . . .7-12Terms and Conditions of Sale . . . . . . . . . . . . . Inside Back CoverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back CoverVictaulic Contact Information . . . . . . . . . . . . . . . . . . . Back Cover
VICTAULIC.COM PL2017-FPIV
Table of ContentsTA
BLE
OF
CO
NTE
NTS
Gasket Selection Guide
Gasket Selection GuideRefer to publication 05.01 for more information.
IMPORTANT PLEASE REAd BEFORE ORdERING. Gasket selection must always be specified on your order.
Standard Gaskets
IPS
GRAdETEMP.
RANGE* COMPOUNdCOLOR COdE GENERAL SERVICE GUIdELINES
E –30°F to +230°F EPDM GreenStripe
May be specified for hot water service within the speci-fied temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES OR STEAM SERVICES.
E
(Type A)§
Ambient EPDM VioletStripe
Applicable for wet and dry (oil-free air) sprinkler services only. For dry services, Flush-Seal™ gaskets may be speci-fied. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES OR STEAM SERVICES.
* For specific chemical and temperature compatibility, refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.
§ Vic-Plus pre-lubricated gasket.The Grade E Type A gasket is only available for Victaulic FireLock™ products.
Special Gaskets
IPS
GRAdETEMP.
RANGE* COMPOUNdCOLOR COdE GENERAL SERVICE GUIdELINES
L –30°F to +350°F Silicone RedGasket
May be specified for dry heat, air without hydrocarbons to +350°F | +177°C and certain chemical services.
* For specific chemical and temperature compatibility, refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.
V
GasketsG
ASk
ET SELEC
TION
GU
IdE
VICTAULIC.COM PL2017-FP
SECTION 1 – FireLock™ and Fire Protection Products
FireLock™ and Fire Protection Products
1-1VICTAULIC.COM PL2017-FP
Style 009N FireLock EZ™ Rigid Coupling
FireLock EZ™ Rigid Coupling
STYLE 009NRefer to publication 10.64
Refer to Victaulic publication
10.01 for details.
STYLE 009N – GRAdE “E” (TYPE A) GASkET
PIPE inches
Approx. Wgt. Ea.
COUPLING COMPLETE † with Grade “E” (Type A)
Gasket
COUPLING COMPLETE † with Grade
“E” (Type A) Gasket and Stainless
Steel Bolts & Nuts
SPARE PARTS
Nom. Size Outside dia. lb
Price Each Price Each Grade “E” (Type A) GasketPainted Galv. Galv.
1Z\v 1.660 1.4 $54.50 $65.00 $131.00 $51.501Z\x 1.900 1.4 55.50 66.00 133.50 55.00
2 2.375 1.8 63.00 73.00 147.00 58.002Z\x 2.875 1.9 72.00 85.50 173.00 64.00
3 3.500 2.2 81.50 101.00 204.00 72.504 4.500 2.9 114.00 137.00 277.00 95.505 5.563 5.0 151.50 190.00 384.00 96.506 6.625 6.0 180.50 219.00 443.00 102.008 8.625 11.4 301.50 366.00 739.00 147.00
10 10.750 22.6 1924.50 2773.00 5602.50 946.0012 12.750 27.6 2398.00 3343.50 6754.50 978.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Style 005 FireLock™ Rigid Coupling
VICTAULIC.COM PL2017-FP1-2
FireLock™ System for Grooved IPS Pipe SE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
FireLock™ Rigid Coupling
STYLE 005Refer to publication 10.02
Refer to Victaulic publication
10.01 for details.
STYLE 005 – GRAdE “E” (TYPE A) GASkET
PIPE inches
COUPLING COMPLETE † With Grade “E” (Type A) Gasket SPARE PARTS
Nom. Size
Outside dia.
Approx. Wgt. Each
lb
Price Each Grade E (Type A) Gasket Only
Price Ea.
Bolt & Nut *
Painted Galv. No. Size inches
Price Each Pltd.
1Z\v 1.660 1.5 $61.00 $73.50 $54.00 2 C\, x 2Z\v $16.001Z\x 1.900 1.6 63.50 75.00 57.50 2 C\, x 2Z\v 16.00
2 2.375 1.9 69.50 82.50 61.50 2 C\, x 2Z\x 17.002Z\x 2.875 2.0 81.00 95.50 67.00 2 C\, x 2Z\x 17.00
3 3.500 2.4 91.50 112.00 76.50 2 C\, x 2Z\x 17.004 4.500 3.8 128.50 153.50 102.00 2 C\, x 2Z\x 17.005 5.563 4.5 155.50 196.00 100.50 2 Z\x x 3 22.006 6.625 5.5 186.50 226.50 110.00 2 Z\x x 3 22.008 8.625 11.4 312.00 378.00 157.50 2 B\, x 4Z\v 24.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
Note: Style 005 FireLock bolts and nuts are sized for use with Style 005 couplings only and must not be used with other Victaulic products.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Grade E (Type A) EPDM gaskets are applicable for wet and dry fire sprinkler systems (ambient temperature) only.
FireLock™ Rigid Coupling
STYLE 005Refer to publication 10.02
Refer to Victaulic publication
10.01 for details.
STYLE 005 – GRAdE “E” (TYPE A) FLUSH-SEAL™ GASkET
PIPE inches
COUPLING COMPLETE † With Grade “E” (Type A) Flush-Seal Gasket SPARE PARTS
Nom. Size
Approx. Wgt. Each
lb
Price Each Grade “E” (Type A) Flush-Seal Gasket
Only Price EachPainted Galvanized
1Z\v 1.5 $82.00 $90.00 $73.501Z\x 1.6 84.50 99.00 81.00
2 1.9 91.00 107.00 87.502Z\x 2.0 109.00 125.50 91.00
3 2.4 116.50 135.50 107.504 3.8 162.50 189.50 142.505 4.5 268.00 307.50 199.006 5.5 295.00 344.50 254.008 11.4 476.50 552.50 278.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Standard gasket and Flush-Seal™ gasket approved for dry pipe systems to –40°F/–40°C. Based on “typical” pipe surface condi-tions, supplemental lubricant is recommended for services installed below 0°F/–18°C and for all dry pipe systems or systems to be subjected to air tests prior to being filled with water. Supplemental lubrication may also be required on pipe with raised or undercut weld seams or pipe that has voids and/or cracks at the weld seams. Victaulic continues to recommend the use of Flush-Seal™ gaskets for dry services.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
1-3
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
FireLock™ Installation-Ready™ FittingsNo. 101 90° Elbow
FireLock™ Installation-Ready™ Fittings90° Elbow
NO. 101Refer to publication 10.06
NO. 101 90° ELBOW – GRAdE “E” (TYPE A) GASkET
PIPE inches
Approx. Wgt. Ea.
COUPLING COMPLETE † with Grade “E” (Type A) Gasket SPARE PARTS
Nom. Size Outside dia. lbPrice Each Grade “E”
(Type A) GasketPainted Galv.1Z\v 1.660 3.2 $142.50 $178.00 $102.50
1Z\x 1.900 3.7 146.50 183.00 109.002 2.375 5.4 147.50 184.50 116.00
2Z\x 2.875 6.4 178.00 222.50 127.00
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 103 45° Elbow
45° Elbow
NO. 103Refer to publication 10.06
NO. 103 45° ELBOW – GRAdE “E” (TYPE A) GASkET
PIPE inches
Approx. Wgt. Ea.
COUPLING COMPLETE † with Grade “E” (Type A) Gasket SPARE PARTS
Nom. Size Outside dia. lbPrice Each Grade “E”
(Type A) GasketPainted Galv.1Z\v 1.660 2.8 $142.50 $178.00 $102.50
1Z\x 1.900 3.1 146.50 183.00 109.002 2.375 4.4 147.50 184.50 116.00
2Z\x 2.875 4.9 178.00 222.50 127.00
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 102 Tee
Tee
NO. 102Refer to publication 10.06
NO. 102 TEE – GRAdE “E” (TYPE A) GASkET
PIPE inches
Approx. Wgt. Ea.
COUPLING COMPLETE † with Grade “E” (Type A) Gasket SPARE PARTS
Nom. Size Outside dia. lbPrice Each Grade “E”
(Type A) GasketPainted Galv.1Z\v 1.66 4.2 $219.50 $274.50 $153.50
1Z\x 1.9 4.6 227.00 284.00 163.502 2.375 6.4 230.00 287.50 173.50
2Z\x 2.875 7.5 265.50 332.00 190.00
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2017-FP1-4
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
No. 143 Close Nipple
Close Nipple
NO. 143Refer to publication 10.06
NO. 143 CLOSE NIPPLE
PIPE inches
Approx. Wgt. Ea.
Price EachNom. Size Outside dia. lb1Z\v 1.660 0.4 $35.001Z\x 1.900 0.5 38.50
2 2.375 0.7 46.002Z\x 2.875 1.1 54.50
1-5
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
FireLock™ and Grooved IPS Pipe Fittings –No. 001 – 90° FireLock™ ElbowNo. 003 – 45° FireLock™ Elbow
FireLock™ FittingsFireLock™ Fittings
90° ELBOW NO. 001 45° ELBOW NO. 003Refer to publication 10.03
No. 001
No. 003
Refer to Victaulic publication
10.01 for details.
FIRELOCk™ FITTINGS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 001 45° Elbow No. 003
inches
Approx. Wgt. Each
lb
Price Each Approx. Wgt. Each
lb
Price Each
Painted Galv. Painted Galv.2 1.7 $47.50 $61.00 1.8 $47.50 $61.00
2Z\x 3.1 64.00 85.50 2.2 64.00 79.503 4.0 83.00 110.50 3.1 83.00 104.504 6.7 119.00 164.00 5.6 119.00 158.005 12.6 278.50 367.00 8.3 278.50 342.006 13.3 327.50 449.50 11.7 327.50 412.508 25.5 638.50 908.50 20.4 638.50 878.00
NOTE: FireLock™ Fittings are designed for use with FireLock™ and FireLock EZ™ couplings. Use of other products may result in bolt pad interference.
No. 10 - 90° IPS ElbowNo. 11 - 45° IPS Elbow
Fittings
90° ELBOW NO. 10 45° ELBOW NO. 11Refer to publication 07.01
No. 10
No. 11
Refer to Victaulic publication
10.01 for details.
FITTINGS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 10 45° Elbow No. 11
inches
Approx. Wgt. Ea.
lbC - E inches
Price Each Approx. Wgt. Ea.
lbC - E inches
Price Each
Painted Galv. Painted Galv.C\v 0.5 2.25 $179.50 $189.00 0.5 1.50 $179.50 $189.001 0.6 2.25 96.00 127.00 0.6 1.75 96.00 121.00
1Z\v 1.0 2.75 96.00 127.00 0.9 1.75 96.00 121.00
1Z\x 1.2 2.75 96.00 127.00 0.9 1.75 96.00 121.0010 63.3 9.00 1972.50 2466.00 37.5 4.75 1279.50 1600.0012 74.0 10.00 2169.50 2712.50 66.7 5.25 1535.50 1920.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2017-FP1-6
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
No. 002 – FireLock™ TeeNo. 006 – FireLock™ Cap
FireLock™ Fittings
TEE NO. 002 CAP NO. 006Refer to publication 10.03
No. 002
No. 006
Refer to Victaulic publication
10.01 for details.
FIRELOCk™ FITTINGS – TEE OR CAP
Nom. Size Tee No. 002 Cap No. 006
inches
Approx. Wgt. Each
lb
Price Each Approx. Wgt. Each
lb
Price Each
Painted Galv. Painted Galv.1Z\v – – – 0.3 $26.00 $40.50
1Z\x – – – 0.4 27.50 40.502 2.4 $72.50 $90.50 0.6 32.50 44.00
2Z\x 3.6 94.50 121.00 1.0 37.50 47.503 5.3 131.50 169.00 1.2 45.00 57.504 8.7 199.00 258.50 2.4 65.50 90.005 15.7 458.00 573.00 4.1 131.50 179.506 22.7 527.00 688.00 5.9 146.50 202.008 38.7 1120.00 1479.50 12.7 278.00 379.50
NOTE: FireLock™ Fittings are designed for use with FireLock™ and FireLock EZ™ couplings. Use of other products may result in bolt pad interference.
No. 20 IPS Tee
Fittings
TEE NO. 20Refer to publication 07.01
No. 20
Refer to Victaulic publication
10.01 for details.
FITTINGS – STANdARd TEE
Nom. SizeApprox. Wgt. Ea.
Tee No. 20
inches lbPrice Each
Painted Galv.C\v 0.6 $192.50 $208.001 1.0 148.50 193.50
1Z\v 1.5 148.50 193.50
1Z\x 2.0 148.50 193.5010 73.0 2359.50 2949.0012 99.0 3067.50 3834.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 60 IPS Cap
Fittings
CAP NO. 60Refer to publication 07.01
No. 60
Refer to Victaulic publication
10.01 for details.
FITTINGS – CAP
Nom. Size Cap No. 60
inches
Approx. Wgt. Ea.
lb
Price Each
Painted Galv.C\v 0.2 $194.00 $211.001 0.3 82.00 97.00
1Z\v 0.3 82.00 97.00
1Z\x 0.5 82.00 97.0010 21.0 675.50 844.5012 35.6 1181.50 1477.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Caps are malleable/ductile iron.
1-7
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Style 744 FireLock™ Flange Adapter
FireLock™ Flange Adapter
STYLE 744 – 175 PSI WITH GRAdE “E” (TYPE A) GASkETRefer to publication 10.04
Refer to Victaulic publication
10.01 for details.
STYLE 744 – GRAdE “E” (TYPE A) GASkET
PIPE inches VIC-FLANGE COMPLETE † SPARE PARTS
Nominal Size
Outside diameter
Approx. Wgt. Each
lb
Price Each Grade “E” (Type A) Gasket Price Ea.Painted Galv.
Style 744 - Hinged2 2.375 2.7 $234.00 $271.00 $44.00
2Z\x 2.875 4.2 272.50 323.50 52.003 3.500 4.8 306.50 367.50 54.504 4.500 6.5 399.00 485.50 71.505 5.563 8.3 478.00 582.50 84.506 6.625 9.0 522.00 634.00 99.008 8.626 13.9 654.50 818.00 131.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL flanges.
For Flange Washers see Spare Parts.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Flange Adapter Notes
Victaulic Flange Adapter Washer Notes
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is oth-erwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices.
Typical applications where a Victaulic flange washer should be used are:
1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange.
4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g. a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter.
5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.
VICTAULIC.COM PL2017-FP1-8
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
No. 67 End of Run Fitting
End of Run Fitting
NO. 67Refer to publication 10.21
Refer to Victaulic publication
10.01 for details.
ENd OF RUN FITTING
Nominal SizeApprox.
Weight Each Price Eachinches lb Painted Galv.
1Z\v x Z\x NPT 0.6 $89.00 $110.50
C\v NPT 0.5 89.00 110.501 NPT 0.6 89.00 110.50
1Z\x x Z\x NPT 0.7 89.00 110.50
C\v NPT 0.7 89.00 110.501 NPT 0.7 89.00 110.50
2 x Z\x NPT 0.7 94.50 125.00
C\v NPT 0.7 94.50 125.001 NPT 0.9 94.50 125.00
2Z\x x Z\x NPT 1.3 113.00 136.50
C\v NPT 1.2 113.00 136.501 NPT 1.3 113.00 136.50
3 x C\v NPT 2.0 148.50 183.001 NPT 1.9 148.50 183.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 10-DR Drain Elbow
Drain Elbow
NO. 10-dRRefer to publication 10.05
USA
Refer to Victaulic publication
10.01 for details.
dRAIN ELBOW WITH 1” dRAIN
Nom. SizeApprox. Wgt. Ea. Price Each
inches lb Painted Galv.2Z\x 5.2 $223.50 $287.00
3 5.3 285.50 340.504 8.8 289.50 393.006 18.7 507.00 721.00
Series 728 FireLock™ Ball Valve
1-9
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Fire Protection Valves
FireLock™ Ball Valve
SERIES 728Refer to publication 10.17
Threaded
Grooved
Refer to Victaulic publication
10.01 for details.
SERIES 728 – WITH WEATHERPROOF ACTUATOR
Nominal Size
T x T Ball Valve with Weatherproof Actuator †
G x G Ball Valve with Weatherproof Actuator † *
inches
Approx. Wgt. Each
lb Price Each
Approx. Wgt. Each
lb Price Each1 5.1 $316.00 – –
1Z\v 5.8 336.50 7.5 $336.501Z\x 6.6 399.50 8.5 399.50
2 8.5 482.00 10.5 482.00
* Grooved valve will come standard with a Z\x” NPT tap.† Please specify choice of grooved or threaded ends on order.
B - 020 - 4 6 6 T - W2
TypeAct.
In./mmSize
CodePressure
Rating Body/Ball Seat End Connection Operator
B 010012014020
1/251¼/321½/402/50
4 - 365 psi 6 - Bronze/Chrome Plated Brass
6 - Reinforced TFE T - ThreadedG - Grooved*
W2 - UL/ULC/FM Weatherproof Gear Operator w/2 SPDT SwitchesW9 - UL/FM Weatherproof Gear Operator with 2 SPDT Switches and Extra Long Wire Leads
* 1¼"/32 mm, 1½"/40 mm and 2"/50 mm only
VICTAULIC.COM PL2017-FP1-10
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Series 705 Butterfly Valve – Supervised OPEN
Butterfly Valve – Supervised OPEN
SERIES 705
(with weatherproof actuator)Refer to publication 10.81
Refer to Victaulic publication
10.01 for details.
SERIES 705 BUTTERFLY VALVE
Nominal Size
WRd – Pre-wired without Tap
WRd – Pre-wired with Tap
inches
Approx. Wgt. Each
lb Price Each
Approx. Wgt. Each
lb Price Each2 8.2 $692.50 8.2 $760.50
2Z\x 9.7 692.50 9.7 760.503 10.7 748.50 10.7 822.504 14.0 785.00 14.0 861.505 25.4 1176.00 23.7 –6 28.7 1115.00 28.7 1212.008 43.0 1708.00 43.0 1824.50
10 80.6 4134.00 – –12 94.6 5904.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 705 Weatherproof Actuator Replacement Kit
Weatherproof Actuator Replacement Kit
FOR SERIES 705 – SUPERVISEd OPEN ONLY
(Consists of mounting bolt, actuator, handwheel and assembly hardware)Refer to publication 10.81
GEAR OPERATOR REPAIR kIT FOR SERIES 705
Nominal Size inches Part Code
kit Price Each
2 K020705100 $671.002Z\x K024705100 671.00
3 K030705100 671.004 K040705100 720.505 K050705100 720.506 K060705100 783.508 K080705100 1851.00
10 K100705100 2408.0012 K120705100 2408.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-11
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Series 707C Butterfly Valve – Supervised CLOSED
Butterfly Valve – Supervised CLOSEd
SERIES 707C
(with weatherproof actuator)Refer to publication 10.75
Refer to Victaulic publication
10.01 for details.
SERIES 707C – PRE-WIREd
Nominal Size
WRd – Pre-wired without Tap
inches
Approx. Wgt. Each
lb Part Code Price Each2 8.2 V020707900 $802.50
2Z\x 9.7 V024707900 802.503 10.7 V030707900 867.504 14.0 V040707900 909.005 25.4 V050707900 1361.506 28.7 V060707900 1291.508 43.0 V080707900 1977.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 765 High Pressure Butterfly Valve – Supervised OPEN
High Pressure Butterfly Valve – Supervised OPEN
SERIES 765
(with Weatherproof Actuator)Refer to publication 10.80
Refer to Victaulic publication
10.01 for details.
SERIES 765 GROOVEd ENd HIGH PRESSURE BUTTERFLY VALVE
Nominal Size
Pre-wired without Tap
Pre-wired with Tap
inches
Approx. Wgt. Each
lb Price Each
Approx. Wgt. Each
lb Price Each2 9.5 $899.50 9.5 $975.50
2Z\x 9.7 930.50 9.7 1010.503 10.7 1006.00 10.7 1090.504 14.0 1054.50 14.0 1144.005 25.8 1579.00 25.8 1722.006 28.7 1497.50 28.7 1624.008 43.0 2293.50 43.0 2488.00
10 80.6 5553.00 – –12 94.6 7929.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2017-FP1-12
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Series 766 High Pressure Butterfly Valve – Supervised CLOSED
High Pressure Butterfly Valve – Supervised CLOSEd
SERIES 766
(with Weatherproof Actuator)Refer to publication 10.83
Refer to Victaulic publication
10.01 for details.
SERIES 766 GROOVEd ENd HIGH PRESSURE BUTTERFLY VALVE
Nominal Size
Pre-wired without Tap
inches
Approx. Wgt. Each
lb Part Code Price Each2 8.2 V020766900 $899.50
2Z\x 9.7 V024766900 930.503 10.7 V030766900 1006.004 14.0 V040766900 1054.505 25.4 V050766900 1579.006 28.7 V060766900 1497.508 43.0 V080766900 2293.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-13
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Series 771 OS&Y and Series 772 NRS Gate Valves
Series 771H OS&Y Groove x Groove Series 771F OS&Y Groove x Flange Series 772H NRS Groove x Groove Series 772F NRS Groove x Flange Gate ValvesRefer to publication 10.92 Series 771H Series 772H Series 771F Series 772F Refer to Victaulic
publication 10.01 for details.
Gate Valve Size Inches
Approx. Weight Each
lb
Series 771H OS&Y Groove x Groove
Price Each
Series 771F OS&Y Groove x Flange
Price Each
Approx. Weight Each
lb
Series 772H NRS Groove x Groove
Price Each
Series 772F NRS Groove x Flange
Price Each2Z\x 30.6 $933.00 $933.00 29.3 $863.50 $863.50
3 36.0 1213.00 1213.00 63.0 1160.00 1160.004 77.0 1427.50 1427.50 70.0 1381.50 1381.506 144.0 1911.50 1911.50 117.0 1771.50 1771.508 170.0 2996.50 2996.50 188.0 2616.00 2616.00
10 344.7 4033.50 4033.50 297.7 3801.00 3801.0012 489.5 6292.00 6292.00 394.9 5318.00 5318.00
Flange Mounting Kits – Series 772H NRS
Flange Mounting Kits for use with Series 772H NRS Gate Valves
FLANGE MOUNTING kITS FOR USE WITH SERIES 772F NRS GATE VALVES
Gate Valve Size inches
Victaulic Part Code Price Each
2Z\x – 3 K024772001 $249.504 K040772001 245.50
6 – 8 K060772001 295.5010 – 12 K100772001 456.50
HANdWHEELS FOR SERIES 772H ANd 772F NRS GATE VALVES
Gate Valve Size inches
Victaulic Part Code Price Each
3 – 4 K030772002 $51.506 – 8 K060772002 140.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2017-FP1-14
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Series 773 and Series 774 Post Indicators
Series 773 and Series 774 Post Indicators
Series 773 Series 774
Refer to Victaulic publication
10.01 for details.
SERIES 773 ANd SERIES 774 POST INdICATORS
description
Approx. Weight Ea.
lb
Series 773 Wall Post Indicator
Price EachSeries 773 Wall Post Indicator Wall Post Indicators include all hardware required to mount indicator to valve. 90.0 $1201.00
Series 774 Upright Post Indicator 250.0 2621.00
Supervisory Switches
Supervisory Switches SUPERVISORY SWITCHES
Model description Price EachOSY2 Outside Screw and Yoke Valve Supervisory Switch $341.50
Series 717H FireLock™ Check Valve
FireLock™ Check Valve
SERIES 717HRefer to publication 10.08
Refer to Victaulic publication
10.01 for details.
SERIES 717H
Size inches
Approx. Weight Each
lb Price Each2 10.7 $376.00
2Z\x 13.8 397.003 20.0 397.00
1-15
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Series 717 FireLock™ Check Valve
FireLock™ Check Valve
SERIES 717Refer to publication 10.08
2Z\x and 3”
4 – 12”
Refer to Victaulic publication
10.01 for details.
SERIES 717
Size inches
Approx. Weight Each
lb Price Each2Z\x 3.6 $397.00
3 3.6 397.004 20.0 413.005 27.0 1004.006 38.0 1028.508 64.0 1785.00
10 100.0 3400.5012 140.0 4436.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 722 Threaded Ball Valve
Threaded Ball Valve
SERIES 722Refer to publication 08.15
Refer to Victaulic publication
10.01 for details.
SERIES 722
Nominal Size inches
Approx. Wgt. Each
lb Price EachZ\v 0.2 $63.50Z\x 0.4 88.00C\v 0.7 88.001 1.0 117.00
1Z\v 1.5 185.501Z\x 2.1 229.50
2 2.4 304.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2017-FP1-16
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Series 732H FireLock™ Wye-Type Vic-Strainer
FireLock™ Wye-Type Vic-Strainer
SERIES 732HRefer to publication 10.68
Refer to Victaulic publication
10.01 for details.
SERIES 732H
Nominal SizeApprox.
Weight Each Price Each
inches lb Galvanized *Standard
Basket Only2 10.0 $1931.00 $1262.00
2Z\x 14.0 2054.50 1315.503 20.0 2342.50 1144.004 32.0 2726.00 1189.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Vic-Strainer Series 732H standard components include galvanized body, access cap and coupling (Grade “E” EPDM, plated bolts and nuts) and Type 304 stainless steel basket (0.062” diameter holes for 2 – 3”/50 – 80 mm sizes; and 0.188” diameter holes for 4”/100 mm sizes). Contact Victaulic for details.
Series 720 Alarm Test Module
Alarm Test Module
SERIES 720Refer to publication 10.22
Series 720T with Threaded Ends
Series 720G with Grooved Ends
Refer to Victaulic publication 10.01 for details.
ALARM TEST MOdULE
Size Style 720T NPT Threaded Style 720G Grooved
inches Orifice
Approx. Wgt. Each
lb Price Each
Approx. Wgt. Each
lb Price Each1 x Z\x 7.3 $342.00 – –
ZM\cx 7.3 342.00 – –1Z\v x Z\x 6.9 393.50 6.6 $393.50
ZM\cx 6.9 393.50 6.6 393.501Z\x x Z\x 9.0 641.50 8.5 641.50
ZM\cx 9.0 641.50 8.5 641.502 x Z\x 10.1 692.00 9.3 692.00
ZM\cx 10.1 692.00 9.3 692.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-17
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Series 720 Alarm Test Module with Gauge Port Tap
Alarm Test Module
SERIES 720 WITH GAUGE PORT TAPRefer to publication 10.22
Refer to Victaulic publication 10.01 for details.
ALARM TEST MOdULE – WITH GAUGE PORT TAP
SizeStyle 720T Threaded with Gauge Port
Tap Style 720G Grooved with Gauge Port Tap
inches Orifice
Approx. Wgt. Each
lb Price Each
Approx. Wgt. Each
lb Price Each1 x Z\x 7.3 $378.00 – –
ZM\cx 7.3 378.00 – –1Z\v x Z\x 6.9 428.50 6.6 $428.50
ZM\cx 6.9 428.50 6.6 428.501Z\x x Z\x 9.0 678.50 8.5 678.50
ZM\cx 9.0 678.50 8.5 678.502 x Z\x 10.1 728.00 9.3 728.00
ZM\cx 10.1 728.00 9.3 728.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 720 Alarm Test Module with Pressure Relief Option
Alarm Test Module
SERIES 720 WITH PRESSURE RELIEF OPTIONRefer to publication 10.22
Refer to Victaulic publication 10.01 for details.
ALARM TEST MOdULE – WITH PRESSSURE RELIEF OPTION
Size Style 720T Threaded with Pressure Relief Option
inches Orifice
Approx. Wgt. Each
lb Price Each1 x Z\x 7.3 $508.00
ZM\cx 7.3 508.001Z\v x Z\x 6.9 565.00
ZM\cx 6.9 565.001Z\x x Z\x 9.0 819.00
ZM\cx 9.0 819.002 x Z\x 10.1 851.50
ZM\cx 10.1 851.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 720 Alarm Test Module With Pressure Relief and Gauge Port Options
Alarm Test Module
SERIES 720 WITH PRESSURE RELIEF ANd GAUGE PORT OPTIONSRefer to publication 10.22
Refer to Victaulic publication 10.01 for details.
ALARM TEST MOdULE – WITH PRESSURE RELIEF ANd GAUGE PORT OPTIONS
Size Style 720T Threaded with Pressure Relief and Gauge Port Option
inches Orifice
Approx. Wgt. Each
lb Price Each1 x Z\x 7.3 $544.00
ZM\cx 7.3 544.001Z\v x Z\x 6.9 601.50
ZM\cx 6.9 601.501Z\x x Z\x 9.0 856.00
ZM\cx 9.0 856.002 x Z\x 10.1 888.50
ZM\cx 10.1 888.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2017-FP1-18
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Series 720 Replacement Pressure Relief Valve Kit
Pressure Relief Valve KitFOR SERIES 720 WITH PRESSURE RELIEF OPTION
SERIES 720 REPLACEMENT PRESSURE RELIEF VALVE kIT
Riser Module Body Size Victaulic Price
Nominal inches Part Code Each1 – 2 V000720K01 $257.00
Series 747M Commercial Zone Control Riser Module
Commercial Zone Control Riser Module
SERIES 747MRefer to publication 10.96
Refer to Victaulic publication 10.01 for details.
SERIES 747M – COMMERCIAL ZONE CONTROL RISER MOdULE
Riser Module Body Size drain Size
Approx. Wgt. Each Price Each Price Each
Nominal inches inches lb Style 747M Grooved *Preassembled with Pressure Relief kit
1Z\v 1 15.2 $923.50 $1376.501Z\x 1 15.5 943.50 1396.50
2 1 19.9 988.00 1442.502Z\x 1Z\v 22.7 1067.50 1520.50
3 1Z\v 23.2 1120.00 1572.504 2 30.3 1373.00 1826.006 2 36.7 1532.50 1985.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
*Price includes all components pictured at left.
See Part Code Configuration Guide
Series 247 Residential Zone Control Riser Module
Residential Zone Control Riser Module
SERIES 247Refer to publication 10.97
Refer to Victaulic publication 10.01 for details.
SERIES 247 – RESIdENTIAL ZONE CONTROL RISER MOdULE
Riser Module Body Size drain Size
Approx. Wgt. Each Price Each
Nominal inches inches lb Style 247M Grooved *1 1 15.2 $867.00
1Z\v 1 15.2 923.501Z\x 1 15.5 943.50
2 1 19.9 988.00
See Part Code Configuration Guide
*Price includes all components pictured at left.
1-19
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
Pressure Relief Valve Kit for Series 747M and 247
Pressure Relief Valve Kit
FOR SERIES 747M ANd 247 RISER MOdULESRefer to publication 10.97
SERIES 747M ANd 247 PRESSURE RELIEF VALVE kIT
Riser Module Body Size Victaulic Price
Nominal inches Part Code Each1 – 6 V000747K01 $427.00
Part Code Configuration Guide
SERIES 247 ANd SERIES 747M
SERIES 247 ANd 747M RISER MOdULES PART COdE CONFIGURATION GUIdE
Code definition OptionsA Class V : Fluid Control Devices
BBB Size (inlet x outlet x drain) Note 2 *
010 : 1” x 1” x 1”012 : 1Z\v” x 1Z\v” x 1”014 : 1Z\x” x 1Z\x” x 1”020 : 2” x 2” x 1”024 : 2Z\x” x 2Z\x” x 1Z\v”030 : 3” x 3” x 1Z\v”040 : 4” x 4” x 2”060 : 6” x 6” x 2”
CCC Series 247 : Series 247 Residential Riser Module747 : Series 747M Commercial Riser Module
D Finish P : Painted in Orange colorE Drain Type G : Grooved Connection
F : NPT Female Threaded ConnectionF Trim Selection S : Standard TrimG Approved Agency U : UL/FM
C : ULC/FMHHH K Factor (Orifice)
Note 3 *028 (K2.8), 030 (K3.0), 035 (K3.5), 042 (K4.2), 049 (K4.9), 056 (K5.6), 069 (K6.9), 080 (K8.0), 112 (K11.2), 140 (K14.0), 168 (K16.8), 250 (K25.0)
Notes 1. Example: “V040747PFSU56” denotes a Series 747M Commercial Zone Control Riser Module
painted in orange color; 4” grooved inlet/4” grooved outlet/2” grooved drain connection; stan-dard trim; UL/FM approved; with K5.6 flow restrictor.
2. Available sizes for Series 247 Residential Riser Modules : 010, 012, 014, 020 Available sizes for Series 747M Commercial Riser Modules : 012, 014, 020, 024, 030,
040, 0603. Approved K Factors for 1” to 2” Series 247 Residential Riser
Modules: 028, 030, 035, 042, 049, 056
Approved K Factors for 1Z\v” to 2” Series 747M Commercial Riser Modules
: 028, 030, 035, 042, 049, 056
Approved K Factors for 2Z\x” to 3” Series 747M Commercial Riser Modules
: 042, 049, 056, 069, 080, 112, 140, 168
Approved K Factors for 4” to 6” Series 747M Commercial Riser Modules
: 042, 049, 056, 069, 080, 112, 140, 168, 250
VICTAULIC.COM PL2017-FP1-20
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Series 735 Fire Pump Test Meter
Fire Pump Test Meter
SERIES 735Refer to publication 10.11
Refer to Victaulic publication
10.01 for details.
SERIES 735 – MOdEL S OR MOdEL L
Nominal Size
Gallons Minute Style 735 Model S Style 735 Model L
inches (GPM)Wgt. Ea.
lb Price EachWgt. Ea.
lb Price Each2Z\x 100 9.0 $10077.00 14.0 $16265.502Z\x 150 9.0 10077.00 14.0 16265.50
3 200 10.0 11093.00 15.0 17393.504 250 12.0 12607.50 17.0 18111.504 300 12.0 12607.50 17.0 18111.504 450 12.0 12607.50 17.0 18111.505 500 13.0 13844.50 18.0 18199.006 750 15.0 15110.50 20.0 19815.506 1000 15.0 15110.50 20.0 19815.506 1250 15.0 15110.50 20.0 19815.508 1500 22.0 17120.00 27.0 22073.008 2000 22.0 17120.00 27.0 22073.008 2500 22.0 17120.00 27.0 22073.008 3000 22.0 17120.00 27.0 22073.00
10 3500 33.0 20393.00 38.0 25677.5010 4000 33.0 20393.00 38.0 25677.5010 4500 33.0 20393.00 38.0 25677.5012 5000 66.0 25427.50 71.0 31454.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-21
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
FireLock™ IGS Groove SystemNo. 142 Welded Outlet
FireLock™ Innovative Groove System (IGS)
Welded Outlet
NO. 142Refer to publication 10.54
NO. 142 WELdEd OUTLET
Nom. Size inches
Approx. Wgt. Ea.
Price Per Box of 100Run x Branch lb1Z\v x 1 0.2 $371.001Z\x x 1 0.2 371.00
2 x 1 0.2 371.002Z\x x 1 0.2 371.00
Style 922 Outlet-T
Outlet-T
STYLE 922Refer to publication 10.54
STYLE 922 OUTLET-T – GRAdE “E” (TYPE A) GASkET
Nom. Size inches
Approx. Wgt. Ea.
COMPLETE OUTLET-T with Grade “E” (Type A) Gasket
Run x Branch lbPrice Each
Painted Galv.1Z\v x 1 1.1 $13.00 $17.00
1Z\x x 1 1.2 13.00 17.002 x 1 1.2 13.50 17.50
2Z\x x 1 1.6 15.00 20.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 145 90° Female Threaded x Groove Elbow
90° Female Threaded x Groove Elbow
NO. 145Refer to publication 10.54
NO. 145 90° FEMALE THREAdEd x GROOVE ELBOW
PIPE inches
Approx. Wgt. Ea.
90° Female Threaded x Groove Elbow No. 145
Nom. Size Outside dia. lbPrice Each
Painted Galv.1 1.315 0.5 $6.00 $8.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 140 Male Threaded x Groove Adapter
VICTAULIC.COM PL2017-FP1-22
FireLock™ System for Grooved IPS PipeSE
CTI
ON
1
FIR
ELO
Ck
™ S
YSTE
M F
OR
GR
OO
VEd
IP
S P
IPE
Male Threaded x Groove Adapter
NO. 140Refer to publication 10.54
NO. 140 MALE THREAdEd x GROOVE AdAPTER
PIPE inches
Approx. Wgt. Ea.
Price Per Box of 50Nom. Size Outside dia. lb1 1.315 0.3 $185.50
No. 141 Female Threaded x Groove Adapter
Female Threaded x Groove Adapter
NO. 141Refer to publication 10.54
NO. 141 FEMALE THREAdEd x GROOVE AdAPTER
PIPE inches
Approx. Wgt. Ea.
Price Per Box of 50Nom. Size Outside dia. lb1 1.315 0.5 $185.50
Series 147 End Cap Assembly
End Cap Assembly
SERIES 147Refer to publication 10.54
SERIES 147 ENd CAP ASSEMBLY
PIPE inches
Approx. Wgt. Ea.
End Cap Assembly Consisting of Style 108 Coupling and No. 146 Cap with
Grade “E” (Type A) Gasket
Nom. Size Outside dia. lbPrice Each
Painted Galv.1 1.315 1.7 $15.50 $20.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-23
FireLock™ System for Grooved IPS Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 1
FIR
ELOCk
™ SYS
TEM FO
R G
RO
OVEd
IPS
PIPE
SECTION 2 – Victaulic® Hydraulic Control Valves
Victaulic® Hydraulic Control Valves
2-1VICTAULIC.COM PL2017-FP
Victaulic® Hydraulic Control Valves
Victaulic® Hydraulic Control ValvesVi
ctau
lic®
Hyd
raul
ic C
ontr
ol V
alve
s
Pres
sure
Cont
rol
Serie
s 867
-400
Press
ure Re
ducin
g Valv
eSe
ries 8
67-7U
L Pres
sure R
educ
ing Va
lveSe
ries 8
67-4U
F Pres
sure R
elief
Valve
Serie
s 867
-7UF P
ressur
e Reli
ef Va
lveSe
ries 8
67-45
9 Pres
sure R
elief
Valve
with
Elec
tric O
verri
deSe
ries 8
67-75
9 Pres
sure R
elief
Valve
with
Elec
tric O
verri
deSe
ries 8
67-43
6 Di�e
rentia
l Pres
sure S
ustai
ning V
alve
Serie
s 867
-42T P
ressur
e Red
ucing
Valve
Serie
s 867
-43T P
ressur
e Reli
ef Va
lveLe
vel C
ontro
lSe
ries 8
66-4
60 Le
vel C
ontro
l Valv
e with
Mod
ulatin
g Hori
zonta
l Floa
tSe
ries 8
66-4
65 Le
vel C
ontro
l Valv
e with
Bi-Le
vel El
ectri
c Floa
tSe
ries 8
66-4
66 Le
vel C
ontro
l Valv
e with
Bi-Le
vel V
ertica
l Floa
tSe
ries 8
66-4
82 Le
vel C
ontro
l Valv
e with
Altit
ude P
ilot
Classi
c Delu
ge 1
869/Y
-1M Hy
drauli
cally C
ontro
lled D
eluge
Valve
with
EasyL
ock M
anua
l Rese
t86
9/Y-2M
Elec
tronic
ally C
ontro
lled D
eluge
Valve
with
EasyL
ock M
anua
l Rese
t86
9/Y-3M
Elec
tro-Pn
euma
ticall
y Con
trolle
d Delu
ge Va
lve w
ith Ea
syLoc
k Man
ual R
eset
869/Y
-4M Pn
euma
ticall
y Con
trolle
d Delu
ge Va
lve w
ith Ea
syLoc
k Man
ual R
eset
869/Y
-5M Hy
drauli
cally C
ontro
lled,
Anti-
Colum
ning D
eluge
Valve
with
EasyL
ock M
anua
l Rese
tCo
mbin
ation
Pres
sure
Cont
rol D
eluge
1
869/Y
-2MC E
lectri
c Pres
sure C
ontro
l Delu
ge Va
lve w
ith M
anua
l Rese
t86
9/Y-3D
C Elec
tric P
ressur
e Con
trol O
n/O� D
eluge
Valve
869/Y
-4DC P
neum
atic P
ressur
e Con
trol O
n/O� D
eluge
Valve
869/Y
-5DC H
ydrau
lic Pre
ssure
Contr
ol On
/O� D
eluge
Valve
869/Y
-6DC E
lectro
-Pneu
matic
Press
ure Co
ntrol
On/O
� Delu
ge Va
lveOn
/O�
Delug
e 1
869/Y
-3D El
ectri
cally C
ontro
lled O
n/O� D
eluge
Valve
869/Y
-3D-R
L Elec
trical
ly Con
trolle
d On/O
� Delu
ge Va
lve w
ith El
ectri
c Rem
ote Re
set La
tch86
9/Y-4D
Pneu
matic
ally C
ontro
lled O
n/O� D
eluge
Valve
869/Y
-5D Hy
drauli
cally C
ontro
lled O
n/O� D
eluge
Valve
869/Y
- 6D E
lectro
-Pneu
matic
ally C
ontro
lled O
n/O� D
eluge
Valve
Clas
sSe
ries
Size
Valv
e Pat
tern
Body
Mat
eria
lOp
tions
Coat
ing
Volta
geTu
bing
and
Fitti
ngs
End
Conn
ectio
nsG -
Glob
e Typ
e (80
0E/80
0Y
Sta
ndard
) Y -
Y Typ
e (80
0 Only
) A -
Ang
le (80
0 Only
)
C - D
uctile
Iron
S - Ca
st Ste
elN -
Stain
less S
teel 31
6B -
Bron
zeU -
Nick
el Al.
Bron
ze
015
020
025
761
030
040
160
165
080
100
120
FP -
Stand
ardFS
- Sea
water
FC - F
oam
C
oncen
trate
1 ½"
2" 2 ½"
76.1 m
m3" 4" 16
5.1 m
m6" 8" 10
"12
"
A5 -
ANSI
#150
RFa5
- AN
SI #1
50FF
A3 -
ANSI
#300
RF16
- ISO
-PN16
25 -
ISO-PN
25VI
- Groo
ved A
NSI
C6
06-81
(
Stand
ard)
NP -
Fema
le NP
T
PR -
Polye
ster
Re
d
(
Stand
ard)
ER -
High B
uilt
Epox
y Red
UC
- Un
coated
NN -
Stainl
ess
St
eel 31
6
(Stan
dard)
MM
- Mo
nel
NA -
Not A
pplic
able
4DC -
24VD
C - N.
C.4D
O - 24
VDC -
N.O.
4DS -
4DS -
24VD
C -
Mag
na La
tch5D
C - 11
0VDC
- N.C.
5DO -
110V
DC - N
.O.5A
C - 11
0V/50
-60 N
.C.5A
O - 11
0V/50
-60 -
N.O.
2AC -
220V
/50-6
0 N.C.
2AO -
220V
/50-6
0 - N.
O.
A - A
Trim
P - P
ressur
e Swi
tch Ge
neral
P7 -
Ex Pr
oof P
ressur
e Swi
tchP9
- EE
xd AT
EX Pr
essure
Switc
hS -
Sing
le Lim
it Swi
tch, G
enera
l Purp
oseS7
- Sin
gle Ex
Proo
f, Lim
it Swi
tchS9
- Sin
gle EE
xd Pr
oxim
ity Lim
it Swi
tchSS
9 - D
ouble
EExd
Prox
imity
Limit S
witch
6 - P
ressur
e Gau
ge As
sembly
6n -
S.S. G
lyceri
n Pres
sure G
uage
Assem
bly6m
- Mo
nel P
ressur
e Gua
ge As
sembly
7 - Ex
Proo
f NEC
Class
1 Div.
1 Sole
noid
9 - Ee
xd AT
EX So
lenoid
DC -
Drip
Check
DV -
Drain
Valve
D - M
anua
l Emerg
ency
Relea
se Bo
x H -
Mach
anica
l Latch
ingW
- Wate
r Moto
r Alar
m As
sembly
E - Sp
ecial
Elasto
mer
F - La
rge Co
ntrol
Filter
I - Va
lve Po
sition
Indic
ator
J - Ju
nctio
n Box
N - S.
S. 31
6 Trim
Acces
sories
Q - P
ressur
e Tran
smitt
erK -
Speci
al
Nam
e/Co
mpa
ny:
E-m
ail:
Phon
e:
This
form
mus
t be
�lle
d ou
t com
plet
ely
with
eac
h or
der a
nd s
ent
with
you
r pur
chas
e or
der.
Plea
se F
AX
to y
our l
ocal
Cus
tom
er C
are
Cent
er(s
ee b
ack
cove
r for
con
tact
info
rmat
ion)
.
NO
TE: P
rice
is n
ot d
epen
dent
on
end
conn
ectio
ns o
r rig
ht a
ngle
con
�gur
atio
n un
less
oth
erw
ise
stat
ed.
NO
TE: "
A" tr
im in
clud
es g
auge
s, dr
ip c
heck
, dra
in, m
anua
l pul
l sta
tion,
and
all
nece
ssar
y tr
im fo
r val
ve fu
nctio
n.1 A
vaila
ble
as 8
00E
and
800Y
val
ve s
tyle
s.
VICTAULIC.COM PL2017-FP2-2
Victaulic® Hydraulic Control Valves
SEC
TIO
N 2
VI
CTA
ULI
C® H
YRAU
LIC
CO
NTR
OL
VALV
ES
Series 867-42T Pressure Reducing Valve
Pressure Control Valves
Pressure Reducing Valve
SERIES 867-42TRefer to publication 30.93
Nominal Size High Built Epoxy Red (Standard) *
inchesOGS ANSI Class 300RF
Price Each1Z\x $3068.50 –
2 3450.50 –2Z\x 3351.50 –
3 4050.00 $4720.004 5850.50 6447.006 11391.50 11391.508 16295.50 16294.50
10 – 32175.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Series 867-7UL Pressure Reducing Valve
Pressure Reducing Valve
SERIES 867-7ULRefer to publication 30.93
Nominal Size Standard Polyester Red Coating (Standard) *
inchesOGS ANSI Class 150RF ANSI Class 300RF NPT
Price Each1Z\x $2550.50 $3758.00 $4362.50 –
2 2700.50 2688.00 3080.00 $2681.002Z\x 2886.00 3096.50 3529.50 3096.00
3 3041.00 3442.50 3786.00 3460.004 3995.50 4512.50 4779.50 –6 6693.50 7132.50 7855.00 –8 11689.50 12604.00 – –
10 – 25756.50 – –12 – 36471.00 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Above pricing based on model FP-XXX-867-7UL-Y-C-XX-PR-NN-66. All other configurations are priced on application.
2-3
Victaulic® Hydraulic Control Valves
VICTAULIC.COM PL2017-FP
SECTIO
N 2
VIC
TAULIC
® HYR
AULIC
CO
NTR
OL VA
LVES
Series 867-43T Pressure Relief Valve
Pressure Relief Valve
SERIES 867-43TRefer to publication 30.93
Nominal Size High Built Epoxy Red (Standard) *
inchesOGS ANSI Class 300RF
Price Each1Z\x $3077.50 –
2 3218.50 –2Z\x 3863.00 –
3 4069.50 $4069.504 5181.50 5181.506 7540.50 7540.408 11430.00 11430.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Series 867-4UF Pressure Relief Valve
Pressure Relief Valve
SERIES 867-4UFRefer to publication 30.93
Nominal Size High Built Epoxy Red (Standard) *
inchesOGS ANSI Class 150RF NPT
Price Each2 – $3010.50 $3028.503 $3818.50 3913.50 –4 5085.50 4911.00 –6 8540.00 8465.50 –8 10761.50 10878.00 –
10 – 16927.00 –12 – 24589.50 –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Above pricing based on model FP-XXX-867-4UF-G-C-ER-NN. All other configurations are priced on application.
Series 867-7UF Pressure Relief Valve
Pressure Relief Valve
SERIES 867-7UFRefer to publication 30.93
Nominal Size Standard Polyester Red Coating (Standard) *
inchesOGS
ANSI Class 150RF
ANSI Class 150RF Angled
ANSI Class 300RF NPT
Price Each1Z\x $4212.50 $4212.50 $4212.50 – –
2 3226.00 3226.00 3226.00 $3226.00 $3226.002Z\x 3246.50 3246.50 3246.50 – 3253.00
3 4004.00 4192.00 4192.00 4128.00 –4 6276.00 6385.50 6385.50 6285.00 –6 10208.00 10748.00 10748.00 10376.50 –8 14880.50 15496.50 15496.50 – –
10 – 26926.50 26926.50 – –12 – 38365.00 38365.00 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Above pricing based on model FP-XXX-867-7UF-X-C-XX-PR-NN. All other configurations are priced on application.
VICTAULIC.COM PL2017-FP2-4
Victaulic® Hydraulic Control Valves
SEC
TIO
N 2
VI
CTA
ULI
C® H
YRAU
LIC
CO
NTR
OL
VALV
ES
Series 867-400 Pressure Reducing Valve
Pressure Reducing Valve
SERIES 867-400Refer to publication 30.93
Nominal Size High Built Epoxy Red (Standard) *
inchesOGS ANSI Class 150RF NPT
Price Each2 – $3010.50 $3028.503 $3818.50 3913.50 –4 4943.50 4911.00 –6 8540.00 8465.50 –8 10761.50 10878.00 –
10 – 16927.00 –12 – 24589.50 –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
Above pricing based on model FP-XXX-867-400-G-C-XX-ER-NN. All other configurations are priced on application.
Series 867-459 Pressure Relief Valve with Electric Override
Pressure Relief Valve
SERIES 867-459
with Electric OverrideRefer to publication 30.93
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $4585.503 5573.004 6701.006 9866.008 13643.50
10 20368.0012 27999.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-867-459-G-C-XX-ER-4DC-NN. All other configurations are priced on application.
Series 867-759 Pressure Relief Valve
Pressure Relief Valve
SERIES 867-759Refer to publication 30.93
Nominal Size Standard Polyester Red Coating (Standard) *inches Price Each
2 +2Z\x +
3 +4 +6 +8 +
10 +12 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-867-759-Y-C-XX-PR-4DC-NN. All other configurations are priced on application.
2-5
Victaulic® Hydraulic Control Valves
VICTAULIC.COM PL2017-FP
SECTIO
N 2
VIC
TAULIC
® HYR
AULIC
CO
NTR
OL VA
LVES
BERMAD FP-436 Differential Pressure Sustaining Valve
BERMAD Differential Pressure Sustaining Valve
BERMAd FP-436
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $3939.003 4901.004 6056.506 9096.008 12794.00
10 19388.5012 26874.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-436-G-C-XX-ER-NN. All other configurations are priced on application.
VICTAULIC.COM PL2017-FP2-6
Victaulic® Hydraulic Control Valves
SEC
TIO
N 2
VI
CTA
ULI
C® H
YRAU
LIC
CO
NTR
OL
VALV
ES
Series 866-460 Level Control BERMAD Valve with Modulating Horizontal Float
Level Control Valves
Level Control BERMAD Valve
SERIES 866-460 BERMAd FP-450-60
with Modulating Horizontal FloatRefer to publication 30.93
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $3079.503 4062.004 5188.006 8387.008 12137.00
10 18761.0012 28137.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-450-60-G-C-XX-ER-NN. All other configurations are priced on application.
Series 866-465 Level Control BERMAD Valve with Bi-Level Electric Float
Level Control BERMAD Valve
SERIES 866-465 BERMAd FP-450-65
with Bi-Level Electric Float
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $3657.003 4632.004 5760.506 8950.508 12724.50
10 19331.5012 28722.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-450-65-G-C-XX-ER-NN. All other configurations are priced on application.
2-7
Victaulic® Hydraulic Control Valves
VICTAULIC.COM PL2017-FP
SECTIO
N 2
VIC
TAULIC
® HYR
AULIC
CO
NTR
OL VA
LVES
Series 866-466 Level Control BERMAD Valve with Vertical Float
Level Control BERMAD Valve
SERIES 866-466 BERMAd FP-450-66
with Vertical Float
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $4943.003 5585.004 6711.006 9950.008 13340.00
10 20953.5012 30409.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-450-66-G-C-XX-ER-NN. All other configurations are priced on application.
Series 866-480 Level Control BERMAD Valve with Altitude Pilot
Level Control BERMAD Valve
SERIES 866-480 BERMAd FP-450-80
with Altitude Pilot
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $4943.003 5585.004 6711.006 9950.008 13340.00
10 20953.5012 30409.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-450-80-G-C-XX-ER-NN. All other configurations are priced on application.
Series 866-482 Level Control BERMAD Valve with Altitude Pilot
Level Control BERMAD Valve
SERIES 866-482 BERMAd FP-450-82
with Altitude Pilot
Nominal Size High Built Epoxy Red (Standard) *inches Price Each
2 $4943.003 5585.004 6711.006 9950.008 13340.00
10 20953.5012 30409.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Other finishes and valve body materials available upon request.
End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.
Above pricing based on model FP-XXX-450-82-G-C-XX-ER-NN. All other configurations are priced on application.
VICTAULIC.COM PL2017-FP2-8
Victaulic® Hydraulic Control Valves
SEC
TIO
N 2
VI
CTA
ULI
C® H
YRAU
LIC
CO
NTR
OL
VALV
ES
Victaulic® Hydraulic Control Valve Accessories
Accessories Component description Configurator Code Price EachPressure Switch (Std.) P $721.50Ex. Proof Pressure Switch P7 2620.00EEx d Pressure Switch P9 2931.50Position Indicator (Std. Materials) 2 – 4” I 1450.00Position Indicator (Std. Materials) 6 – 12” I 1748.50Limit Switch Assembly S 1985.50Ex. Proof Limit Switch Assembly/UL S7 4113.50Ex. Proof/EEx.d Limit Switch/Proximity Switch S9 5029.50Double Ex. Proof/EEx.d Limit Switch/Proximity Switch SS9 7548.00Ex. Proof Junction Box J 543.50Large Control Filter F 1368.00Water Motor Alarm Assembly including Strainer W 1247.50Mechanical-Latch Adder H 1640.00Std. Pressure Gauge Plus Manometer Block Valve 6 146.00S.S. Glycerin Pressure Gauge Plus Manometer Block Valve 6n 543.50Solenoid Ex. Proof Ex. NEMA 7 and 9 7 704.50Solenoid Ex.Proof EEx. m. ATEX 8 864.50Solenoid Ex.Proof EEx. d. ATEX 9 1623.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
2-9
Victaulic® Hydraulic Control Valves
VICTAULIC.COM PL2017-FP
SECTIO
N 2
VIC
TAULIC
® HYR
AULIC
CO
NTR
OL VA
LVES
SECTION 3 – Hole Cut Products
Hole Cut Products
3-1VICTAULIC.COM PL2017-FP
Styles 920/920N Mechanical-T Outlet
Mechanical-T Outlet
STYLES 920/920NRefer to publication 11.02
Style 920 Female
Refer to Victaulic publication
10.01 for details.
STYLE 920 – FEMALE THREAdEd BRANCH
Size StyleCOMPLETE MECHANICAL-T Female Threaded Branch † Spare Parts
inches Run x Brch. Number
Approx. Wgt. Ea.
lb
Price Each
Bolts & Nuts Size
inches
Standard Grade “E” or “T”
GasketsPainted Galv.2 x Z\x 920N 3.1 $89.00 $112.00 Z\x x 2C\v $19.00
C\v 920N 3.1 89.00 112.00 Z\x x 2C\v 19.001 920N 3.0 89.00 112.00 Z\x x 2C\v 19.00
1Z\v 920N 3.5 102.50 127.50 Z\x x 2C\v 22.00
1Z\x 920N 3.6 102.50 127.50 Z\x x 2C\v 22.00
2Z\x x Z\x 920N 3.0 89.00 112.00 Z\x x 2C\v 19.00
C\v 920N 3.0 89.00 112.00 Z\x x 2C\v 19.001 920N 2.9 89.00 112.00 Z\x x 2C\v 19.00
1Z\v 920N 3.5 125.00 152.00 Z\x x 3Z\v 22.00
1Z\x 920N 3.6 125.00 152.00 Z\x x 3 22.003 x Z\x 920N 3.4 102.50 125.00 Z\x x 2C\v 19.00
C\v 920N 3.4 102.50 125.00 Z\x x 2C\v 19.001 920N 3.3 102.50 125.00 Z\x x 2C\v 19.00
1Z\v § 920N 3.8 129.50 162.00 Z\x x 2C\v 22.00
1Z\x § 920N 4.1 129.50 162.00 Z\x x 2C\v 22.002 § 920N 4.9 149.00 184.50 Z\x x 3Z\v 22.00
4 x Z\x 920N 3.7 129.00 153.50 Z\x x 2C\v 19.00
C\v 920N 3.7 129.00 153.50 Z\x x 2C\v 19.001 920N 3.6 129.00 153.50 Z\x x 2C\v 19.00
1Z\v 920N 4.0 151.00 178.00 Z\x x 2C\v 22.00
1Z\x 920N 4.2 156.50 197.00 Z\x x 2C\v 22.002 920N 5.0 156.50 199.00 Z\x x 2C\v 22.00
2Z\x 920 5.8 163.50 211.50 1 x 2C\v 24.503 920 8.4 174.00 223.50 1 x 3Z\v 27.50
5 x 1Z\x 920 7.7 191.00 242.00 B\, x 4C\v 22.002 920 8.2 191.00 242.00 B\, x 4C\v 22.00
2Z\x 920 8.3 201.50 257.00 B\, x 4C\v 24.503 920 8.4 214.50 276.00 B\, x 4C\v 27.50
6 x 1Z\v 920N – – – Z\x x 2C\v 22.00
1Z\x 920N 5.1 196.00 250.50 Z\x x 2C\v 22.002 920N 5.6 196.00 250.50 Z\x x 2C\v 22.00
2Z\x 920 7.6 211.00 272.50 B\, x 4C\v 24.503 920 8.4 224.00 288.00 B\, x 4C\v 27.504 920 10.1 248.50 323.00 B\, x 4C\v 36.00
8 x 2 920 11.6 341.50 430.50 C\v x 4Z\v 26.00
2Z\x 920 11.6 341.50 430.50 C\v x 4Z\v 26.003 920 12.6 360.50 457.00 C\v x 4Z\v 27.504 920 15.3 371.00 479.00 C\v x 4Z\v 36.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
VICTAULIC.COM PL2017-FP3-2
Hole Cut Products SE
CTI
ON
3
HO
LE C
UT
PR
Od
UC
TS
Mechanical-T Outlet
STYLES 920/920NRefer to publication 11.02
Style 920 Grooved
Refer to Victaulic publication
10.01 for details.
STYLES 920/920N GROOVEd MECHANICAL-T OUTLET
Size StyleCOMPLETE MECHANICAL-T
Grooved Branch Spare Parts
inches Run x Brch. Number
Approx. Wgt. Ea.
lb
Price Each
Bolts & Nuts Size
inches
Standard Grade “E” or “T”
GasketsPainted Galv.2 x 1 920N – – – – $19.00
1Z\v 920N 3.5 $102.50 $127.50 Z\x x 2C\v 22.00
1Z\x 920N 3.2 102.50 127.50 Z\x x 2C\v 22.00
2Z\x x 1 920N – – – – 19.001Z\v 920N 3.2 125.00 152.00 Z\x x 3Z\v 22.00
1Z\x 920N 3.3 125.00 152.00 Z\x x 3 22.003 x 1 920N – – – – 19.00
1Z\v § 920N 3.7 129.50 162.00 Z\x x 2C\v 22.00
1Z\x § 920N 3.8 129.50 162.00 Z\x x 2C\v 22.002 § 920N 3.5 149.00 184.50 Z\x x 3Z\v 22.00
3Z\x x 2 920N 5.0 576.50 720.00 Z\x x 2C\v 22.004 x 1 920N – – – – 19.00
1Z\v 920N 3.6 151.00 178.00 Z\x x 2C\v 22.00
1Z\x 920N 3.9 156.50 197.00 Z\x x 2C\v 22.002 920N 4.6 156.50 199.00 Z\x x 2C\v 22.00
2Z\x 920 5.0 163.50 211.50 Z\x x 2C\v 24.503 920 6.4 174.00 223.50 Z\x x 3Z\v 27.50
5 x 1Z\x 920 7.6 191.00 242.00 B\, x 4C\v 22.002 920 8.0 191.00 242.00 B\, x 4C\v 22.00
2Z\x 920 7.9 201.50 257.00 B\, x 4C\v 24.503 920 8.8 214.50 276.00 B\, x 4C\v 27.50
6 x 1Z\v 920N 4.8 196.00 250.50 Z\x x 2C\v 22.00
1Z\x 920N 5.1 196.00 250.50 Z\x x 2C\v 22.002 920N 5.6 196.00 250.50 Z\x x 2C\v 22.00
2Z\x 920 8.3 214.50 272.50 B\, x 4C\v 24.503 920 9.9 224.00 288.00 B\, x 4C\v 27.504 920 10.1 248.50 323.00 B\, x 4C\v 36.00
8 x 2 920 11.4 341.50 430.50 C\v x 4Z\v 26.00
2Z\x 920 11.6 341.50 430.50 C\v x 4Z\v 26.003 920 11.6 360.50 457.00 C\v x 4Z\v 27.504 920 12.5 371.00 479.00 C\v x 4Z\v 36.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
+ Quoted on application. Contact Victaulic for pricing and availability.
3-3
Hole Cut Products
VICTAULIC.COM PL2017-FP
SECTIO
N 3
H
OLE
CUT P
RO
dU
CTS
Vic-Tap II
Vic-Tap II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Tool Model Part Number
Shipping Weight
lbRental
Per Month List PriceVic-Tap II - Parts A and B only R-000-902-VT2 70 $4890.50 $10745.00Part A only R-100-902-VT2 – – 7329.50Part B only R-300-901-VT1 – – 7342.50Part C 4 x 2Z\x”/100 – 65 mm R-016-931-010 – – 2153.505 x 2Z\x”/125 – 65 mm R-020-931-010 – – 2153.506 x 2Z\x”/150 – 65 mm R-024-931-010 – – 2153.508 x 2Z\x” /200 – 65 mm R-032-931-010 – – 2153.50
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $769.50 Part. No. N-E15-000-004.
NOTE: 40”/1016 mm minimum clearance is required for the Vic-Tap II.
VICTAULIC.COM PL2017-FP3-4
Hole Cut Products S
ECTI
ON
3
HO
LE C
UT
PR
Od
UC
TS
Styles 920/920N Mechanical-T Cross
Mechanical-T Cross
STYLE 920/920N *Refer to publication 11.03
Refer to Victaulic publication
10.01 for details.
The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.STYLES 920/920N MECHANICAL-T CROSS
Nominal Size inches Style
COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †
Run x BranchNumber Painted Galv. A B
2 x 2 x Z\x x Z\x 920N $140.00 $179.00
Z\x x C\v 920N 160.00 205.00
Z\x x 1 920N 140.00 179.00
Z\x x 1Z\v 920N 160.00 205.00
Z\x x 1Z\x 920N 160.00 205.00
C\v x C\v 920N 140.00 205.00
C\v x 1 920N 140.00 179.00
C\v x 1Z\v 920N 160.00 205.00
C\v x 1Z\x 920N 160.00 205.001 x 1 920N 140.00 179.001 x 1Z\v 920N 160.00 205.001 x 1Z\x 920N 160.00 205.00
1Z\v x 1Z\v 920N 160.00 205.00
1Z\x x 1Z\v 920N 160.00 205.00
1Z\x x 1Z\x 920N 160.00 205.00
2Z\x x 2Z\x x Z\x x Z\x 920N 140.00 179.00
Z\x x C\v 920N 140.00 179.00
Z\x x 1 920N 140.00 179.00
Z\x x 1Z\v 920N 191.50 248.00
Z\x x 1Z\x 920N 191.50 264.00
C\v x C\v 920N 140.00 179.00
C\v x 1 920N 140.00 179.00
C\v x 1Z\v 920N 191.50 248.00
C\v x 1Z\x 920N 191.50 264.001 x 1 920N 140.00 179.001 x 1Z\v 920N 191.50 248.001 x 1Z\x 920N 191.50 248.00
1Z\v x 1 920N 191.50 248.00
1Z\v x 1Z\v 920N 191.50 248.00
1Z\x x 1 920N 191.50 248.00
1Z\x x 1Z\v 920N 191.50 248.00
1Z\x x 1Z\x 920N 191.50 205.003 x 3 x Z\x x Z\x 920N 156.50 201.50
Z\x x C\v 920N 156.50 201.50
Z\x x 1 920N 191.50 239.50
Z\x x 1Z\v § 920N 191.50 239.50
Z\x x 1Z\x § 920N 191.50 239.50
Z\x x 2 § 920N 221.50 274.50
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact Victaulic for details.‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
3-5
Hole Cut Products
VICTAULIC.COM PL2017-FP
SECTIO
N 3
H
OLE
CUT P
RO
dU
CTS
Nominal Size inches Style
COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †
Run x BranchNumber Painted Galv. A B
3 x 3 x C\v x C\v 920N $156.50 $201.50
C\v x 1 920N 191.50 239.50
C\v x 1Z\v 920N 191.50 239.50
C\v x 1Z\x 920N 191.50 239.50
C\v x 2 920N 221.50 274.501 x 1 920N 156.50 201.501 x 1Z\v 920N 191.50 191.501 x 1Z\x 920N 191.50 239.501 x 2 920N 221.50 274.50
1Z\v x 1Z\v § 920N 191.50 239.50
1Z\x x 1Z\v § 920N 191.50 239.50
1Z\x x 1Z\x § 920N 191.50 239.502 x 1Z\v § 920N 221.50 249.502 x 1Z\x 920N 221.50 274.502 x 2 § 920N 221.50 274.50
4 x 4 x Z\x x Z\x 920N 191.50 249.00
Z\x x C\v 920N 191.50 249.00
Z\x x 1 920N 191.50 249.00
Z\x x 1Z\v 920N 232.50 291.50
Z\x x 1Z\x 920N 232.50 291.50
Z\x x 2 920N 249.00 293.50
C\v x C\v 920N 191.50 249.00
C\v x 1 920N 191.50 249.00
C\v x 1Z\v 920N 232.50 291.50
C\v x 1Z\x 920N 232.50 291.50
C\v x 2 920N 249.00 293.501 x 1 920N 191.50 249.001 x 1Z\v 920N 232.50 293.501 x 1Z\x 920N 249.00 291.501 x 2 920N 249.00 293.50
1Z\v x 1Z\v 920N 232.50 291.50
1Z\x x 1Z\v 920N 232.50 291.50
1Z\x x 1Z\x 920N 232.50 291.502 x 1Z\v 920N 249.00 293.502 x 1Z\x 920N 249.00 293.502 x 2 920N 249.00 293.50
2Z\x x 2Z\x 920 249.00 316.003 x 2Z\x 920 259.00 335.003 x 3 920 259.00 335.00
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact Victaulic for details.‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
VICTAULIC.COM PL2017-FP3-6
Hole Cut Products S
ECTI
ON
3
HO
LE C
UT
PR
Od
UC
TS
Nominal Size inches Style
COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †
Run x BranchNumber Painted Galv. A B
5 x 5 x 1Z\x x 1Z\x 920 $284.50 $360.502 x 1Z\x 920 299.00 360.502 x 2 920 284.50 360.50
2Z\x x 1Z\x 920 299.00 381.50
2Z\x x 2 920 299.00 381.50
2Z\x x 2Z\x 920 299.00 381.503 x 1Z\x 920 320.50 411.003 x 2 920 320.50 411.003 x 2Z\x 920 320.50 411.003 x 3 920 320.50 411.00
6 x 6 x 1Z\v ‡ x 1Z\v ‡ 920N 291.00 374.50
1Z\x x 1Z\v ‡ 920N 291.00 374.50
1Z\x x 1Z\x 920N 291.00 374.502 x 1Z\v ‡ 920N 291.00 374.502 x 1Z\x 920N 291.00 374.502 x 2 920N 303.50 404.00
2Z\x x 2Z\x 920 312.50 404.003 x 2Z\x 920 334.00 428.003 x 3 920 334.00 428.004 x 2Z\x 920 369.00 479.004 x 3 920 369.00 479.004 x 4 920 369.00 479.00
8 x 8 x 2 x 2 920 510.50 644.002Z\x x 2 920 510.50 644.00
2Z\x x 2Z\x 920 510.50 644.003 x 2Z\x 920 537.00 683.003 x 3 920 537.00 683.004 x 2Z\x 920 555.50 718.004 x 3 920 555.50 718.004 x 4 920 555.50 718.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact Victaulic for details.‡ Available grooved only.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
3-7
Hole Cut Products
VICTAULIC.COM PL2017-FP
SECTIO
N 3
H
OLE
CUT P
RO
dU
CTS
Style 922 Outlet Tee
Outlet Tee
STYLE 922Refer to publication 10.52
Refer to Victaulic publication
10.01 for details.
STYLE 922 – GRAdE “E” EPdM TYPE A GASkET
Nominal Size inches
Approx. Wgt. Ea.
COMPLETE OUTLET-TEE Grade “E” Type A Gasket
Run x Branch lbPrice Each
Painted Plated1Z\v x Z\x 1.07 $20.00 $37.50
C\v 1.17 20.00 37.501 1.20 20.00 41.00
1Z\x x Z\x 1.15 20.00 37.50
C\v 1.20 20.00 37.501 1.42 20.00 41.50
2 x Z\x 1.30 20.00 41.50
C\v 1.37 20.00 41.501 1.50 21.50 46.50
2Z\x x Z\x 1.40 23.50 46.50
C\v 1.50 23.50 46.501 1.65 23.50 48.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 923 Strapless Outlet
Strapless Outlet
STYLE 923Refer to publication 11.05
4 – 8”
10” – Up
Refer to Victaulic publication
10.01 for details.
STRAPLESS OUTLET – WITH GRAdE “E” GASkET
Nominal SizeCOMPLETE STRAPLESS OUTLET
With “E” or “T” Gasket *
inchesApprox. Wgt. Per Unit
lbPrice
Per Unit4 – 8 x Z\x NPT IPS 2.28 $221.504 – 8 x C\v NPT IPS 2.28 236.5010 and larger x Z\x NPT IPS 2.16 221.5010 and larger x C\v NPT IPS 2.16 236.50
* Available with Grade “T” Gasket. Contact Victaulic for details.
VICTAULIC.COM PL2017-FP3-8
Hole Cut Products S
ECTI
ON
3
HO
LE C
UT
PR
Od
UC
TS
SECTION 4 – Couplings, Spare Parts and Fittings
Couplings, Spare Parts and Fittings
4-1VICTAULIC.COM PL2017-FP
Style 07 Zero-Flex™ Rigid Coupling
Grooved IPS Pipe Couplings
Zero-Flex™ Rigid Coupling
STYLE 07
(with Style 77 gasket)Refer to publication 06.02
Refer to Victaulic publication
10.01 for details.
STYLE 07 – GRAdE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPE
Approx. Wgt. Ea.
COUPLING COMPLETE †
With Grade “E” or “T” Gasket
COUPLING COMPLETE †
with Flush-Seal “E” or “T” Gasket SPARE PARTS
inches
lb
Price Each Price Each Plated Bolt & NutNom. Size
Outside dia. Painted Galv. Painted Galv. No. *
Size § Inches
1 1.315 1.6 $74.50 $93.50 $105.50 $125.50 2 C\, x 2
1Z\v 1.660 1.7 69.50 87.50 99.00 117.50 2 C\, x 2
1Z\x 1.900 1.9 74.50 93.50 105.50 125.50 2 C\, x 22 2.375 2.2 94.50 118.50 124.50 148.50 2 Z\x x 2Z\x
2Z\x 2.875 2.6 107.50 136.00 149.00 174.50 2 Z\x x 2C\v
3 3.500 3.0 125.00 158.50 157.50 193.00 2 Z\x x 2Z\x
4 4.500 4.8 173.50 223.50 220.00 271.00 2 Z\x x 2C\v
5 5.563 6.7 223.50 291.50 348.00 612.50 2 B\, x 3Z\v
6 6.625 8.3 295.50 382.50 410.00 501.50 2 B\, x 3Z\v
8 8.625 15.1 464.50 603.50 541.50 677.50 2 C\v x 4Z\v
10 10.750 23.5 902.00 1203.50 1084.00 1376.00 2 M\, x 6Z\x
12 12.750 28.2 1007.00 1348.00 1232.50 1584.50 2 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 177N QuickVic Flexible Coupling for Steel
QuickVic™ Flexible Coupling for Steel
STYLE 177NRefer to publication 06.24
Refer to Victaulic publication
10.01 for details.
STYLE 177N – GRAdE “EHP” OR “T” GASkET
PIPEApprox. Wgt. Ea.
COUPLING COMPLETE † With Grade “EHP” or “T” Gasket SPARE PARTS
inches
lb
Price EachGrade “EHP” or
“T” GasketNom. Size
Outside dia. Painted Galv.
2 2.375 3.3 $82.00 $107.50 $64.002Z\x 2.875 3.8 95.00 132.50 69.50
3 3.500 4.3 105.50 145.50 78.504 4.500 7.4 152.00 213.50 105.505 5.563 10.0 228.50 328.00 157.506 6.625 12.8 270.50 387.00 176.008 8.625 15.5 465.00 691.00 211.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
VICTAULIC.COM PL2017-FP4-2
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
Style 77 Standard Flexible Coupling
Standard Coupling
STYLE 77Refer to publication 06.04
Refer to Victaulic publication
10.01 for details.
STYLE 77 – GRAdE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPEApprox. Wgt. Ea.
COUPLING COMPLETE †
With Grade “E” or “T” Gasket
COUPLING COMPLETE †
With Flush-Seal “E” or “T” Gasket SPARE PARTS
inches
lb
Price Each Price Each Plated Bolt & NutNom. Size
Outside dia. Painted Galv. Painted Galv. No.*
Size § Inches
C\v 1.050 1.1 $54.00 $72.00 $83.50 $102.50 2 C\, x 21 1.315 1.2 54.00 72.00 83.50 102.50 2 C\, x 2
1Z\v 1.660 2.0 70.50 93.50 102.50 126.50 2 Z\x x 2Z\x
1Z\x 1.900 2.1 76.50 99.50 107.00 132.50 2 Z\x x 2Z\x
2 2.375 2.6 82.00 107.50 112.00 140.00 2 Z\x x 2Z\x
2Z\x 2.875 3.1 95.00 132.50 136.00 173.00 2 Z\x x 2C\v
3 3.500 3.7 105.50 145.50 140.50 182.00 2 Z\x x 2C\v
3Z\x 4.000 5.6 151.00 211.00 202.00 265.00 2 B\, x 3Z\v
4 4.500 6.7 152.00 213.50 202.50 265.00 2 B\, x 3Z\v
5 5.563 10.5 228.50 328.00 353.00 458.00 2 C\v x 4Z\v
6 6.625 12.0 270.50 387.00 392.00 513.50 2 C\v x 4Z\v
8 8.625 20.8 438.50 651.50 528.00 723.50 2 M\, x 510 10.750 31.1 714.00 1022.50 847.00 1138.00 2 1 x 612 12.750 27.8 811.50 1161.00 994.50 1309.00 2 1 x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 75 Flexible Coupling
Flexible Coupling
STYLE 75Refer to publication 06.05
Refer to Victaulic publication
10.01 for details.
STYLE 75 – GRAdE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPEApprox. Wgt. Ea.
COUPLING COMPLETE †
With Grade “E” or “T” Gasket
COUPLING COMPLETE †
With Flush-Seal “E” or “T” Gasket SPARE PARTS
inches
lb
Price Each Price Each Plated Bolt & NutNom. Size
Outside dia. Painted Galv. Painted Galv.
Size § Inches
1 1.315 1.3 $54.50 $67.50 $86.00 $101.00 C\, x 2
1Z\v 1.660 1.4 55.50 72.00 90.00 107.00 C\, x 2
1Z\x 1.900 1.5 67.50 83.50 98.00 117.00 C\, x 22 2.375 1.8 82.00 107.50 101.00 120.50 C\, x 2
2Z\x 2.875 1.9 95.00 132.50 120.50 142.00 C\, x 23 3.500 2.9 105.50 145.50 127.00 153.00 Z\x x 2C\v
4 4.500 4.1 152.00 213.50 181.00 221.50 Z\x x 2C\v
5 5.563 5.8 228.50 328.00 307.00 365.50 B\, x 3Z\v
6 6.625 7.0 270.50 387.00 339.50 411.50 B\, x 3Z\v
8 8.625 12.9 438.50 651.50 563.50 675.50 C\v x 4Z\v
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
4-3
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
Style 750 Reducing Coupling
Reducing Coupling
STYLE 750Refer to publication 06.08
Refer to Victaulic publication
10.01 for details.
STYLE 750 – GRAdE “E” OR “T” GASkET
PIPEApprox. Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T” Gasket
SPARE PARTS
Nominal Size
lb
Price EachPlated Bolt &
Nut
inches Painted Galv.Size § Inches
2 x 1 2.0 $134.00 $161.00 C\, x 2
1Z\x 2.0 108.00 130.50 C\, x 2
2Z\x x 2 2.9 140.00 174.50 C\, x 23 x 2 4.6 158.50 200.50 Z\x x 2C\v
2Z\x 4.1 138.00 174.50 Z\x x 2C\v
4 x 2 8.8 250.50 315.00 B\, x 3Z\v
2Z\x 8.3 224.50 295.50 B\, x 3Z\v
3 6.4 211.00 271.50 B\, x 3Z\v
5 x 4 10.8 282.50 370.00 C\v x 4Z\v
6 x 4 16.1 425.00 535.00 C\v x 4Z\v
5 12.6 373.00 482.50 C\v x 4Z\v
8 x 6 22.3 634.50 802.50 M\, x 510 x 8 32.3 813.50 1030.00 1 x 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
Support rings required on vertical installations. Please specify on order.
NOTE: See Spare Parts Section for spare part prices.
VICTAULIC.COM PL2017-FP4-4
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
Lubricant
Lubricant LUBRICANT Price EachPACK With 12 Tubes – 4 Fluid Ounces/120 ml Each $398.50
CONTAINER One Quart – 32 Fluid Ounces/960 ml Each 174.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
To ensure easy assembly and service of all your Victaulic installations including HDPE, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.
LUBRICANT USAGE GUIdESize of Gasket inches
Number of Gaskets Size of Gasket inches
Number of Gaskets Size of Gasket inches
Number of Gaskets
Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart2 55 400 8 13 100 16 6 453 36 270 10 11 80 18 5 354 26 200 12 8 60 20 4 306 17 125 14 7 50 24 3 20
Gaskets
Gaskets GASkETS FOR STYLES 07, 75, 77 COUPLINGS
Nom. Size Standard Gaskets
inches
Grade “E” EPdM or Grade “T”
NitrileFlush-Seal
Grade “E” or “T”C\v $39.50 $73.501 39.50 73.50
1Z\v 42.00 77.50
1Z\x 44.00 78.502 44.00 81.00
2Z\x 52.00 98.003 55.50 98.00
3Z\x 69.50 126.505 89.50 230.506 96.00 236.008 131.00 243.50
10 164.00 314.0012 191.00 373.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
4-5
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
SILICONE GASkETS FOR STYLES 07, 75, 77 COUPLINGS
Nom. Size inches
Grade “L” Silicone
C\v $136.501 136.50
1Z\v 195.501Z\x 204.50
2 126.502Z\x 146.50
3 158.003Z\x 207.00
4 229.504Z\x +
5 449.006 492.508 550.00
10 714.0012 843.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Gaskets
NOTE: For pricing couplings complete with any special gaskets - take the standard coupling price with Grade “E” or “T” gasket complete (Victaulic Main Price List), sub-tract the standard gasket price, then add on the price of the special gasket. Gasket guidelines can be found in the latest Victaulic Gasket Selection Guide (publica-tion 05.01). This information is general in scope and Victaulic should be consulted for guidelines when a question arises.
STANdARd “E” OR “T” GASkETS FOR STYLE 750
Nom. Size Price Eachinches Grade “E” or “T”
2 x 1 $42.001Z\x 42.00
2Z\x x 2 54.003 x 2 61.00
2Z\x 61.004 x 2 70.50
2Z\x 71.503 73.50
5 x 4 85.506 x 4 96.50
5 105.508 x 6 117.00
10 x 8 140.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2017-FP4-6
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
Metal Liner
Metal Liners
STYLES 77 ANd 75 COUPLINGS
(Type 304 Stainless Steel)
STYLES 77 ANd 75 COUPLINGS
Nom. Size inches Price Each
2 +2Z\x +
3 +4 +5 +6 +8 +
10 +
Nom. Size inches Price Each
12 +14 +16 +18 +20 +24 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Plated Trackhead Bolts and Nuts
Plated Trackhead Bolts and Nuts
PLATEd TRACkHEAd BOLTS ANd NUTS
Bolt and Nut Size
inches Price EachC\, x 2 $20.50Z\x x 2Z\x 22.00
2C\v 22.003 22.00
3Z\v 22.00B\, x 2C\v 25.00
3Z\v 25.003Z\x 26.50
4 33.505 42.00
C\v x 4Z\v 29.505 39.00
M\, x 5 51.505Z\x 58.506Z\x 64.00
Bolt and Nut Size
inches Price Each1 x 3Z\x $55.50
5 52.005Z\x 64.00
6 64.006Z\x 67.50
1Z\, x 4 86.005Z\x 86.00
1Z\v x 3Z\x 86.005Z\x 249.50
1C\, x 5C\v 290.001Z\x x 4Z\x 276.00
5C\v 311.001C\v x 6 542.501M\, x 6 718.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Go/No-Go Pipe Tape
Go/No-Go Tape Tool Model Part Number Purchase PricePT100A Imperial Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $79.50
Box of 6 RW75-100-KIT 432.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Each box contains 6 Go/No-Go Tapes.
# Tool discount applies.
4-7
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
Elbows –No. 12 - 22Z\x°No. 13 - 11Z\v°
Grooved IPS Pipe Fittings
ElbowsRefer to publication 07.01
No. 12 Standard & Gooseneck
No. 13
Refer to Victaulic publication
10.01 for details.
ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW
Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13
inches
Approx. Wgt. Ea.
lbC - E inches
Price Each Approx. Wgt. Ea.
lbC - E inches
Price Each
Painted Galv. Painted Galv.1 0.6 ‡ 3.25 $601.50 $621.50 0.3 (sw) 1.38 $240.50 +
1Z\v 0.8 1.75 105.00 132.50 0.5 (sw) 1.38 105.00 $132.50
1Z\x 0.8 1.75 105.00 132.50 0.5 (sw) 1.38 105.00 132.502 1.4 ‡ 3.75 105.00 132.50 1.0 1.38 105.00 132.50
2Z\x 2.3 ‡ 4.00 105.00 132.50 1.5 1.50 105.00 132.503 3.1 ‡ 4.50 151.00 188.50 2.1 1.50 151.00 187.00
3Z\x 4.0 (sw) 2.50 350.00 467.50 2.7 (sw) 1.75 350.00 413.004 5.6 2.88 198.50 257.00 3.6 1.75 183.50 243.005 7.8 (sw) 2.88 604.50 729.00 5.0 (sw) 2.00 604.50 711.006 12.2 ‡ 6.25 553.50 704.50 7.0 2.00 553.50 668.508 20.0 ‡ 7.75 1151.50 1430.50 10.1 2.00 984.50 1169.50
10 30.0 (sw) 4.38 1519.00 1973.00 11.8 2.13 1418.50 1693.0012 40.0 (sw) 4.88 2053.00 2545.50 29.3 2.25 2053.00 2486.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
‡ Gooseneck design.
No. 100 and No. 110 1Z\x D Long Radius Elbows
Long Radius - 1Z\x D ElbowsRefer to publication 07.01
No. 100
No. 110
Refer to Victaulic publication
10.01 for details.
LONG RAdIUS – 90° LONG RAdIUS ELBOW OR 45° LONG RAdIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
inches
Approx. Wgt. Ea.
lbC - E inches
Price Each Approx. Wgt. Ea.
lbC - E inches
Price Each
Painted Galv. Painted Galv.2 2.5 4.38 $217.00 $284.00 1.8 2.75 $188.50 $238.00
2Z\x 3.4 5.13 271.00 311.50 2.8 3.00 600.00 674.503 6.0 5.88 217.00 284.00 4.9 3.38 188.50 238.004 12.3 7.50 322.00 430.00 7.3 4.00 228.50 303.505 18.0 (sw) 9.25 1629.50 1867.50 14.8 (sw) 4.88 1514.00 1661.506 30.4 10.75 933.00 1225.00 17.4 5.50 669.50 858.008 66.0 14.25 2228.50 2848.50 36.0 7.25 1163.50 1512.00
10 107.0 15.00 2563.00 3204.00 57.0 6.25 1570.50 1963.5012 156.0 18.00 2820.00 3524.50 90.0 7.50 2121.00 2651.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2017-FP4-8
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
No. 29M Tee with Threaded Branch
TeeRefer to publication 07.01
No. 29M
Refer to Victaulic publication
10.01 for details.
TEE WITH THREAdEd BRANCH
Nom. SizeApprox. Wgt. Ea.
Tee with Male Threaded
Branch No. 29M
inches lbPrice Each
Painted Galv.C\v 0.6 $379.00 $425.501 1.0 – –
1Z\v 1.5 310.50 364.00
1Z\x 2.0 482.50 568.502 3.0 310.50 364.00
3Z\x 7.9 (sw) + +4 11.3 640.00 879.505 17.8 1836.50 +6 25.7 1640.00 1930.008 47.6 + +
10 99.0 + +12 133.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. 35 CrossNo. 33 True Y
Cross and WyeRefer to publication 07.01
No. 35
No. 33
Refer to Victaulic publication
10.01 for details.
CROSS ANd WYE – STEEL CROSS OR STEEL 90 TRUE Y
Nom. SizeSteel Cross (sw)
No. 35Steel 90 True Wye (sw)
No. 33
inches
Approx. Wgt. Ea.
lb
Price Each Approx. Wgt. Ea.
lb
Price Each
Painted Galv. Painted Galv.C\v 0.9 + + 0.7 – –1 1.3 $357.00 $411.50 1.1 $546.00 +
1Z\v 2.1 429.00 499.50 1.5 546.00 +
1Z\x 2.5 462.00 535.50 1.8 546.00 $650.002 3.8 264.00 314.50 2.5 546.00 650.00
2Z\x 6.1 264.00 314.50 4.3 546.00 650.003 10.5 469.50 574.00 6.1 652.50 776.00
3Z\x 11.5 942.00 1123.00 9.6 + +4 15.8 777.00 956.50 9.8 855.00 1027.50
4Z\x 18.5 + + – – –5 20.0 1584.00 1908.00 15.0 1223.00 1468.006 28.0 2031.50 2466.50 22.3 1509.00 1838.508 48.0 2676.50 3311.00 36.0 2173.00 2670.50
10 121.5 4390.00 5430.50 69.9 3608.00 4419.5012 110.0 6335.50 7892.00 80.0 3985.00 5040.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
4-9
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
No(s). 40, 42, and 43 Adapter Nipples
Adapter Nipples ‡
Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x GroovedRefer to publication 07.01
No. 40
No. 42
No. 43
AdAPTER NIPPLES – GROOVEd x THREAdEd, GROOVEd x BEVELEd, OR GROOVEd x GROOVEd
Nom. Size Price Per Length – inchesinches 3 4 6 8 10 12
C\v $58.50 $58.50 + + + +1 58.50 58.50 $92.00 + + +
1Z\v 58.50 58.50 92.00 + + +
1Z\x 58.50 58.50 92.00 $106.00 $121.50 $139.002 58.50 58.50 92.00 106.00 121.50 139.00
2Z\x 67.50 67.50 122.50 122.50 143.00 162.503 82.00 82.00 132.00 158.00 184.50 210.504 133.50 133.50* 133.50 218.00 257.00 295.505 273.50* 273.50* 273.50 380.50 469.50 540.006 350.50 350.50* 350.50* 453.00 525.50 597.008 393.00* 393.00* 393.00* 522.00 716.50 803.50
10 507.00* 507.00* 510.50* 550.00 847.00 1007.0012 688.50* 688.50* 649.50* 688.50 1071.50 1276.50
Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS.‡ Contact Victaulic for pricing on seamless adapter nipples.
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. NOTE: For Pump Package Nipples with 1 Z\x” hole cut to receive Style 923 Strapless Outlet or Style 924 Thermometer Outlet add $137.00 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-cancellable and non-returnable.* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 80 Female Threaded Adapter
Female Threaded AdapterRefer to publication 07.01
No. 80
FEMALE THREAdEd AdAPTER
Nom. SizeApprox.
Wgt. EachNo. 80
Price Eachinches lb Painted Galv.
C\v 1.0 $492.50 $545.001 1.0 527.50 566.00
1Z\v 1.5 (sw) 279.00 312.50
1Z\x 1.5 (sw) 361.00 385.002 1.4 171.50 200.50
2Z\x 1.5 171.50 200.503 2.9 198.50 242.004 4.5 303.00 379.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2017-FP4-10
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
No(s). 18 and 19 Adapter Elbows
Adapter ElbowsRefer to publication 07.01
No. 18
No. 19
Refer to Victaulic publication
10.01 for details.
AdAPTER ELBOWS – 90° AdAPTER ELBOW OR 45° AdAPTER ELBOW
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
inches
Approx. Wgt. Ea.
lb
Price Each Approx. Wgt. Ea.
lb
Price Each
Painted Galv. Painted Galv.C\v 0.5 $246.50 $261.50 0.5 $250.50 $265.001 0.5 165.00 204.50 0.6 – –
1Z\v 0.9 184.50 204.50 0.6 – –
1Z\x 1.1 235.00 272.50 0.9 271.00 289.502 2.5 165.00 204.50 1.9 – –
2Z\x 3.0 286.00 312.50 2.3 279.00 288.003 5.8 265.00 324.50 5.0 475.00 510.006 17.6 818.00 1034.50 12.7 995.00 1106.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
4-11
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
No. 25 Grooved Reducing Tee
Reducing TeeRefer to publication 07.01
No. 25
Refer to Victaulic publication
10.01 for details.
REdUCING TEE
Size Reducing Tee No. 25inches Approx.
Wgt. Each lb
Price Each
Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 $252.50 $296.50
1Z\v x 1Z\v x 1 (sw) 1.3 261.00 296.50
1Z\x x 1Z\x x C\v (sw) 1.5 264.00 363.001 (sw) 1.5 363.00 373.50
1Z\v (sw) 1.7 275.50 304.502 x 2 x C\v 2.5 341.50 402.50
1 2.7 312.50 365.501Z\v (sw) 1.8 389.50 409.50
1Z\x 3.0 312.50 371.00
2Z\x x 2Z\x x C\v (sw) 3.9 421.00 456.001 3.8 312.50 365.50
1Z\v 4.2 470.50 553.50
1Z\x 3.9 312.50 371.002 4.5 312.50 371.00
3 x 3 x C\v (sw) 5.7 485.00 505.501 6.1 276.00 351.50
1Z\v 8.0 386.50 511.00
1Z\x 6.5 276.00 355.502 6.2 276.00 355.50
2Z\x 6.6 276.00 355.504 x 4 x C\v (sw) 8.0 620.00 662.00
1 7.8 371.00 463.501Z\v (sw) 9.6 729.00 849.00
1Z\x 10.2 371.00 463.502 11.2 371.00 486.50
2Z\x 11.4 371.00 486.503 11.6 371.00 486.50
5 x 5 x 1 (sw) 14.0 816.50 1005.001Z\x (sw) 14.3 1037.00 1123.00
2 (sw) 14.5 898.00 1109.502Z\x 15.2 732.00 921.50
3 16.6 732.00 921.504 16.7 792.00 1000.50
6 x 6 x 1 (sw) 23.0 984.50 1207.001Z\x (sw) 24.0 1017.50 1392.50
2 21.6 872.00 1145.002Z\x 21.4 872.00 1145.00
3 26.5 872.00 1145.004 25.0 872.00 1145.005 23.2 872.00 1151.50
8 x 8 x 1Z\x (sw) 33.0 1256.50 1529.002 (sw) 33.5 1256.50 1586.00
2Z\x (sw) 39.0 1256.50 1586.003 (sw) 33.6 1353.50 1616.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2017-FP4-12
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
Size Reducing Tee No. 25inches Approx.
Wgt. Each lb
Price Each
Run x Branch Painted Galv.8 x 8 x 4 41.8 $1815.00 $2345.50
5 (sw) 34.0 1815.00 2361.006 42.3 1815.00 2371.00
10 x 10 x 1Z\x 62.0 1818.50 2382.502 (sw) 62.0 1848.00 2382.50
2Z\x (sw) 62.4 1877.00 2382.503 (sw) 60.0 1906.00 2402.504 (sw) 61.0 1935.50 2419.005 (sw) 52.0 1964.50 2455.506 (sw) 59.0 1993.50 2492.508 (sw) 64.7 2022.50 2528.50
12 x 12 x 1 (sw) 77.0 2025.50 2536.502 (sw) 80.0 2045.50 2544.00
2Z\x (sw) 78.0 2066.50 2552.003 (sw) 82.0 2087.50 2560.004 (sw) 80.0 2108.50 2568.005 (sw) 75.0 2129.50 2576.006 (sw) 75.0 2150.00 2583.508 (sw) 80.0 2399.50 2882.50
10 (sw) 84.0 2534.00 3062.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
4-13
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
No. 29T Threaded Reducing Tee
Reducing Tee with Threaded BranchRefer to publication 07.01
No. 29T
Refer to Victaulic publication
10.01 for details.
REdUCING TEE WITH THREAdEd BRANCH
Size Reducing Tee No. 29T with Threaded Branchinches Approx. Wgt. Each
lbPrice Each
Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 + +
1Z\v x 1Z\v x 1 (sw) 1.3 + +
1Z\x x 1Z\x x C\v (sw) 1.5 + +1 (sw) 1.5 + +
1Z\v (sw) 1.7 + +2 x 2 x C\v 2.5 $647.50 $425.00
1 2.7 330.00 386.501Z\v (sw) 2.9 554.00 592.50
1Z\x 3.0 330.00 392.00
2Z\x x 2Z\x x C\v (sw) 3.5 647.50 667.501 (sw) 3.8 330.00 386.50
1Z\v 3.8 719.00 739.00
1Z\x 3.9 330.00 392.002 (sw) 4.5 330.00 395.00
3 x 3 x C\v (sw) 5.9 604.00 641.001 6.1 330.00 412.00
1Z\v 6.3 811.50 863.00
1Z\x (sw) 6.5 330.00 414.502 (sw) 6.2 330.00 414.50
2Z\x (sw) 6.4 793.00 858.504 x 4 x C\v (sw) 7.2 876.00 1078.50
1 7.8 412.00 507.001Z\v (sw) 8.5 845.50 911.00
1Z\x 9.2 412.00 516.002 11.2 412.00 516.00
2Z\x 11.4 412.00 531.003 11.6 412.00 532.50
5 x 5 x 2 (sw) 14.5 880.00 959.002Z\x (sw) 15.2 791.00 1001.50
3 (sw) 16.6 732.00 921.504 (sw) 16.7 791.00 1078.50
6 x 6 x 1 (sw) 23.0 1200.00 1394.501Z\x (sw) 25.0 1062.00 1335.50
2 21.6 1027.00 1278.002Z\x 21.4 1027.00 1278.00
3 26.5 1027.00 1278.004 25.0 1297.00 1394.505 23.2 1027.00 1278.00
8 x 8 x 2 (sw) 33.5 1256.50 1732.503 (sw) 33.6 1732.50 2246.50
4 41.8 1815.00 2345.505 (sw) 34.0 1815.00 2539.50
6 42.3 2008.00 2758.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2017-FP4-14
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
No. 29T Threaded Reducing Tee
Reducing Tee with Threaded BranchRefer to publication 07.01
No. 29T
Refer to Victaulic publication
10.01 for details.
REdUCING TEE WITH THREAdEd BRANCH
Size Reducing Tee No. 29T with Threaded Branchinches Approx. Wgt. Each
lbPrice Each
Run x Branch Painted Galv.10 x 10 x 2 (sw) 62.0 $2104.50 $3074.00
3 (sw) 60.0 2104.50 2610.504 (sw) 61.0 2201.50 2813.505 (sw) 52.0 1935.50 2872.006 (sw) 59.0 2250.00 2910.008 (sw) 64.7 3034.00 3391.50
12 x 12 x 3 (sw) 80.0 2834.00 3658.504 (sw) 82.0 3036.50 3899.505 (sw) 75.0 3210.00 4169.006 (sw) 75.0 3248.50 4208.008 (sw) 80.0 3340.00 4305.50
10 (sw) 84.0 3495.50 4312.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
4-15
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
No. 50 Concentrc Reducers, No. 51 Eccentric Reducers
ReducersRefer to publication 07.01
No. 50
No. 51
Refer to Victaulic publication
10.01 for details.
REdUCERS – CONCENTRIC OR ECCENTRIC *
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
inches
Approx. Wgt. Ea.
lb
Price Each Approx. Wgt. Ea.
lb
Price Each
Painted Galv. Painted Galv.1Z\v x C\v 1.9 $429.00 $470.50 3.2 + +
1 1.9 448.50 493.50 3.2 + +1Z\x x C\v 1.4 505.00 545.50 4.5 + +
1 0.8 112.50 132.00 4.5 (sw) $473.50 $554.001Z\v 1.0 112.50 132.00 4.5 463.00 578.50
2 x C\v 0.9 112.50 132.00 2.0 (sw) 522.00 +1 0.7 112.50 132.00 2.3 (sw) 522.00 554.00
1Z\v 1.2 122.50 144.00 4.6 (sw) 570.00 +
1Z\x 1.0 112.50 132.00 1.1 117.00 138.50
2Z\x x C\v 1.3 878.50 947.50 3.3 1319.00 1486.501 1.1 152.50 175.00 3.5 1228.50 1360.00
1Z\v 3.3 112.50 132.00 1.4 125.00 144.50
1Z\x 3.6 112.50 132.00 3.7 (sw) 569.00 650.002 3.9 112.50 132.00 4.3 233.00 316.00
3 x C\v 1.5 883.00 988.00 4.5 + +1 1.3 122.50 149.00 4.8 (sw) 1318.00 1450.50
1Z\v 1.4 195.50 225.00 4.8 1194.00 +
1Z\x 5.1 135.00 164.00 5.1 (sw) 657.00 767.002 1.6 99.50 121.00 6.0 266.00 363.00
2Z\x 1.8 135.00 163.00 7.0 266.00 371.00
3Z\x x 3 2.0 143.50 173.00 7.0 (sw) 1447.50 +4 x 1 3.0 148.50 182.00 6.5 (sw) 2667.00 3263.00
1Z\v 4.6 1129.00 1265.50 – – –
1Z\x 2.6 (sw) 204.50 270.00 8.1 (sw) 1614.00 1743.002 2.4 132.00 162.00 3.3 324.00 452.00
2Z\x 2.7 163.00 198.00 3.4 324.00 452.003 3.2 163.00 198.00 3.5 324.00 452.00
3Z\x 2.9 163.00 198.00 8.0 (sw) 2258.00 +5 x 2 9.0 (sw) 1588.00 1754.00 5.2 (sw) 1780.00 2048.00
2Z\x 4.3 330.00 402.00 10.8 (sw) 1516.50 +3 5.0 188.50 233.00 11.1 (sw) 1466.00 1633.504 4.3 224.00 280.00 12.0 439.50 620.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2017-FP4-16
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
inches
Approx. Wgt. Ea.
lb
Price Each Approx. Wgt. Ea.
lb
Price Each
Painted Galv. Painted Galv.6 x 1 5.0 $296.50 $369.50 14.5 (sw) $2762.00 $3000.00
1Z\x 5.5 + + + 2677.50 +2 6.6 296.50 369.50 14.5 (sw) 2520.50 2744.50
2Z\x 6.4 330.00 405.00 14.2 (sw) 3000.00 3265.503 6.4 296.50 369.50 15.0 583.00 818.004 6.5 260.00 335.00 17.0 511.50 750.505 6.4 382.50 474.00 17.0 613.00 868.50
8 x 3 9.3 527.50 657.00 22.0 (sw) 2926.50 3187.504 10.4 527.50 660.00 23.0 (sw) 2559.50 2920.005 11.6 527.50 664.00 23.0 (sw) 2559.50 2920.006 11.9 669.00 837.50 24.0 1031.00 1403.00
10 x 4 19.7 1199.50 1477.00 32.0 (sw) 4518.00 5418.005 33.0 2638.50 3010.50 34.6 4255.50 5008.006 20.0 1312.50 1635.50 36.9 (sw) 3210.00 3805.008 22.0 1312.50 1663.50 21.6 2718.00 3379.50
12 x 4 44.0 5740.50 6832.00 48.0 (sw) 4745.50 5582.006 24.6 1565.00 1933.50 50.0 (sw) 4287.50 5164.008 52.0 2346.50 2770.50 53.5 (sw) 4179.00 4999.50
10 39.0 2346.50 2904.50 57.0 (sw) 3741.50 4436.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
4-17
Couplings, Spare Parts and Fittings
VICTAULIC.COM PL2017-FP
SECTIO
N 4
C
OU
PLIN
GS, S
PAR
E PA
RTS
AN
d FITTIN
GS
No. 52 Reducer – Male Threaded Small End
Reducer - Male Threaded Small EndRefer to publication 07.01
No. 52
Refer to Victaulic publication
10.01 for details.
REdUCER – MALE THREAdEd SMALL ENd
Nominal Size
Approx. Wgt. Ea. Price Each
inches Inlet x Outlet lb Painted Galv.
1Z\x x 1 0.8 $117.00 $143.501Z\v 0.9 122.50 144.00
2 x C\v 0.9 117.00 143.501 0.7 117.00 143.50
1Z\v 1.2 117.00 143.50
1Z\x 1.0 117.00 143.50
2Z\x x 1 1.1 157.50 181.501Z\v 1.2 (sw) 165.00 203.00
1Z\x 1.3 (sw) 173.00 203.002 1.4 117.00 143.50
3 x C\v 1.5 (sw) 832.00 885.501 1.3 127.00 153.00
1Z\x 1.5 143.50 171.502 1.5 143.50 171.50
2Z\x 2.4 (sw) 173.00 203.004 x 1 2.3 163.50 198.00
1Z\x 2.7 381.00 498.002 2.6 174.00 208.00
2Z\x 2.6 174.50 214.003 2.5 213.50 252.00
5 x 4 4.5 1204.50 1310.006 x 1 5.5 330.00 405.00
2 5.7 330.00 405.002Z\x 5.8 330.00 405.00
3 5.8 330.00 405.004 6.5 (sw) 1977.00 2189.505 2.0 (sw) 3086.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2017-FP4-18
Couplings, Spare Parts and FittingsSE
CTI
ON
4
CO
UPLI
NG
S, S
PAR
E P
AR
TS A
Nd
FIT
TIN
GS
SECTION 5 – VicFlex™ Sprinkler Fitting Systems
VicFlex™ Sprinkler Fitting Systems
5-1VICTAULIC.COM PL2017-FP
Series AH1 VicFlex™ Hose
Series AH1 HoseRefer to publication 10.85
Braided AH1 Hose
Size Approx. Wgt. Ea. Victaulic BoxPrice Eachinches lb Part No. Quantity
31 x Z\x 2.4 A31HAQBBA1 10 $62.00C\v 2.4 A31TAQBBA1 10 62.00
36 x Z\x 2.6 A36HAQBBA1 10 66.50C\v 2.6 A36TAQBBA1 10 66.50
48 x Z\x 3.1 A48HAQBBA1 10 71.50C\v 3.1 A48TAQBBA1 10 71.50
60 x Z\x 3.6 A60HAQBBA1 10 82.50C\v 3.6 A60TAQBBA1 10 82.50
72 x Z\x 4.1 A72HAQBBA1 10 93.50C\v 4.1 A72TAQBBA1 10 93.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series AH2 VicFlex™ Hose
Series AH2 HoseRefer to publication 10.85
Braided AH2 Hose
Size Approx. Wgt. Ea. Victaulic BoxPrice Eachinches lb Part No. Quantity
31 x Z\x 2.8 A31HAQFBA2 10 $84.00C\v 2.8 A31TAQFBA2 10 84.00
36 x Z\x 3.1 A36HAQFBA2 10 89.00C\v 3.1 A36TAQFBA2 10 89.00
48 x Z\x 3.8 A48HAQFBA2 10 93.50C\v 3.8 A48TAQFBA2 10 93.50
60 x Z\x 4.5 A60HAQFBA2 10 105.00C\v 4.5 A60TAQFBA2 10 105.00
72 x Z\x 5.2 A72HAQFBA2 10 115.50C\v 5.2 A72TAQFBA2 10 115.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series AH2-300 VicFlex™ Hose
Series AH2-300 Hose
FM Approved up to 300 psiRefer to publication 10.84
Braided AH2-300 Hose
Size Approx. Wgt. Ea. Victaulic BoxPrice Eachinches lb Part No. Quantity
31 x Z\x 2.8 A31HAQB300 10 $92.50C\v 2.8 A31TAQB300 10 92.50
36 x Z\x 3.1 A36HAQB300 10 97.00C\v 3.1 A36TAQB300 10 97.00
48 x Z\x 3.8 A48HAQB300 10 101.50C\v 3.8 A48TAQB300 10 101.50
60 x Z\x 4.5 A60HAQB300 10 113.00C\v 4.5 A60TAQB300 10 113.00
72 x Z\x 5.2 A72HAQB300 10 124.00C\v 5.2 A72TAQB300 10 124.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series AH3 VicFlex™ Hose
VICTAULIC.COM PL2017-FP5-2
VicFlex™ Sprinkler Fitting Systems SE
CTI
ON
5
VICFL
Ex™
SPR
INk
LER
FIT
TIN
G S
YSTE
MS
Series AH2-CC
Series AH2-CC
Braided AH2-CC HoseRefer to publication 10.85
SizeApprox. Wgt.
Ea. Victaulic Box Price Eachinches lb Part No. Quantity Painted Galv.
31 x Z\x 3.3 A31HAQBP2C 10 $98.00 $109.00
C\v 3.3 A31TAQBP2C 10 98.00 109.0036 x Z\x 3.6 A36HAQBP2C 10 102.50 113.50
C\v 3.6 A36TAQBP2C 10 102.50 113.5048 x Z\x 4.3 A48HAQBP2C 10 107.50 118.00
C\v 4.3 A48TAQBP2C 10 107.50 118.0060 x Z\x 5.0 A60HAQBP2C 10 118.50 129.50
C\v 5.0 A60TAQBP2C 10 118.50 129.5072 x Z\x 5.7 A72HAQBP2C 10 129.50 140.50
C\v 5.7 A72TAQBP2C 10 129.50 140.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series AH5 VicFlex™ Hose
Series AH5 HoseRefer to publication 10.89
Unbraided AH5 Hose
Size Approx. Wgt. Ea. Victaulic BoxPrice Eachinches lb Part No. Quantity
31 x Z\x 1.8 A31HAQFBUE 10 –
C\v 2.1 A31TAQFBUE 10 $55.5048 x Z\x 1.9 A48HAQFBUE 10 64.50
C\v 2.8 A48TAQFBUE 10 64.5060 x Z\x 2.3 A60HAQFBUE 10 76.00
C\v 3 A60TAQFBUE 10 76.0072 x Z\x 2.8 A72HAQFBUE 10 87.00
C\v 3.4 A72TAQFBUE 10 87.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-3
VicFlex™ Sprinkler Fitting Systems
VICTAULIC.COM PL2017-FP
SECTIO
N 5
VIC
FLEx™
SPR
INk
LER FITTIN
G SYS
TEMS
VicFlex™ Brackets
VicFlex™ BracketsBrackets Size
Approx. Wgt. Ea. Victaulic Box Price
description inches lb Part No. Quantity EachStyle AB1 24 1.8 A240AB1ADJ 10 $21.50For suspended ceilings – allows installation before ceiling tiles in place
48 2.6 A480AB1ADJ 10 28.50
Style AB2 24 1.8 A240AB2000 10 21.50For suspended ceilings – allows installation before ceiling tile is in place; and hard-lid ceilings – allows for vertical sprinkler adjustment
48 2.7 A480AB2000 10 28.50
Style AB3– 0.3 A000AQFINB 10 9.00Surface mount applications, wood, metal and
block wallsStyle AB4 24 1.5 A240AB4000 10 28.50For hard-lid ceilings with hat furring channel grid systems – allows for vertical sprinkler adjustment 48 2.2 A480AB4000 10 36.50
Style AB5 24 1.6 A240AB5000 10 21.50For hard-lid ceilings; allows for vertical sprinkler adjustment 48 2.3 A480AB5000 10 28.50
Style AB7 24 1.4 A000AQFBEE 10 14.00For suspended ceilings 48 1.9 A000AQFB48 10 21.50Style AB7 Adjustable 24 1.5 A275AQFADJ 10 14.50For suspended ceilings 48 2.0 A551AQFADJ 10 21.00Style AB10 4 1.0 A040B100TZ 10 21.50For Armstrong® Techzone™ Ceilings 6 1.1 A06AB100TZ 10 29.00Style AB11 24 1.5 A240B11000 10 21.50For lay-in panel suspended t-grid ceilings or drywall suspended t-grid ceilings, allows for low profile installations (for use only with specific low profile elbows found in the accessories section)
48 2.7 A480B11000 10 28.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VicFlex™ Reducers and End Fittings
VicFlex™ Reducers and End Fittings End Fittings and Parts Outlet Size
Approx. Wgt. Ea. Victaulic Box Price
description inches lb Part No. Quantity Each
Reducing Nipple – 5C\v”/140 mm Length
Z\x 0.7 A004AQBRNH 10 $16.50C\v 0.7 A006AQBRNT 10 16.50
Reducing Nipple – 9”/229 mm Length
Z\x 1.6 A090AQFRNH 10 23.50C\v 1.7 A090AQFRNT 10 23.50
Reducing Nipple – 13”/330 mm Length
Z\x 2.3 A130AQFRNH 10 31.00C\v 2.3 A130AQFRNT 10 31.00
90° Reducing Elbow – 4”/102 mm Length
Z\x 0.9 A000AQFRE4 10 30.00C\v 1.0 A000AQFRE6 10 30.00
90° Reducing Elbow – 6”/152 mm Length
Z\x 0.9 A000AQFRE5 10 30.00C\v 1.2 A000AQFRE7 10 30.00
Low Profile Long 90° Reducing Elbow – Recessed Sprinkler*
Z\x 1.0 A004AQB00L 10 43.50C\v 1.0 A006AQB00L 10 43.50
Low Profile Short 90° Reducing Elbow – Concealed Sprinkler*
Z\x 0.7 A004AQB000 10 43.50C\v 0.7 A006AQB000 10 43.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.*Must be used with AB11 Low Profile Bracket
VicFlex™ Preassembled System Order Form
VICTAULIC.COM PL2017-FP5-4
VicFlex™ Sprinkler Fitting SystemsSE
CTI
ON
5
VICFL
Ex™
SPR
INk
LER
FIT
TIN
G S
YSTE
MS
VicFlex™ Preassembled System Order FormBi
llTo
:Sh
ip To:
Tag
Emai
lPh
one
No.
Fax
No.
Stat
e/Pr
ovin
ce
Com
pany
Nam
e
Addr
ess
Ord
er N
o.
Com
pany
Nam
e
Addr
ess
Stat
e
Zip
Code
/Pos
tal C
ode
Zip
Code
Dat
e
Sprin
kler
Fr
ame
Sprin
kler
Sele
ctio
nHo
se/B
rack
et Se
lect
ion
Sprin
kler
Thre
adSp
rinkl
erFi
nish
Defle
ctor
St
yle
*Sp
rinkl
erRe
spon
seSp
rinkl
erK-
Fact
orSp
rinkl
erTe
mpe
ratu
re
Bran
ch Li
neNi
pple
(Inle
t)Ro
om Si
ze/
Escu
tche
onBr
acke
tCl
ass
❑ 0
- No
Brac
ket
❑ A
- VicF
lex❑
27 -
V27
❑ 3
1 - V3
1❑
34 -
V34
❑ 3
8 - V3
8
❑ B
- ST
D PE
ND❑
P -
STD
CNC
❑ G
- EC
LH PE
ND❑
J - E
CLH
CNC
❑ K
- RE
S PEN
D❑
N -
RES C
NC
❑ 1
- ½
" NPT
❑ 2
- ¾
" NPT
❑ 6
- ½
" BSP
T❑
7 -
¾" B
SPT
❑ 2
- 2¼
x 1"
NPT
St
raigh
t❑
6 -
2¼ x
1" BS
PT
Stra
ight
❑ 7
- 2¼
x ¾
" BSP
T St
raigh
t❑
8 -
2¾ x
1¼" B
SPT
Stra
ight
❑ 1
- 5¾
" Stra
ight
❑ 2
- 9"
Stra
ight
❑ 3
- 13
" Stra
ight
❑ 4
- 4¾
" Elbo
w❑
5 -
6¼" E
lbow
❑ 6
- Sh
ort L
ow Pr
o�le
90° E
lbow
*❑
7 -
Long
Low
Pro�
le 90
° Elbo
w *
❑ A
- 13
5°F/
57°C
❑ C
- 15
5°F/
68°C
❑ F
- 20
0°F/
93°C
❑ S
- St
anda
rd❑
Q -
Quick
❑ H
- 4.9
❑ 4
- 5.6
❑ 5
- 8.0
❑ 6
- 11
.2❑
7 -
14.0
❑ L
- La
rge
❑ S
- Sm
all❑
W - W
hite S
S Es
cutch
eon
❑ X
- St
ainles
s Esc
utch
eon
❑ N
- VC2
50❑
0 -
N/A
❑ 1
- Pla
in Br
ass
❑ 2
- Ch
rom
e❑
4 - W
hite (
RAL
9010
)❑
N - V
C250
Hose
Styl
e❑
2 -
31"
❑ 3
- 36
"❑
4 -
48"
❑ 5
- 60
"❑
6 -
72"
Hose
Leng
th❑
1 -
AH1
❑ 2
- AH
2❑
5 -
AH5
❑ 6
- AH
2-30
0❑
6 -
AH2-
CC
Redu
cer
(out
let)
A0
NO
TE: A
ll sy
stem
s are
PO
A. C
onta
ct c
usto
mer
car
e fo
r pric
ing.
* N
ote:
for u
se w
ith A
B11
Brac
ket o
nly.
V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form
5-5
VicFlex™ Sprinkler Fitting Systems
VICTAULIC.COM PL2017-FP
SECTIO
N 5
VIC
FLEx™
SPR
INk
LER FITTIN
G SYS
TEMS
V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form
Bill
To:
Ship To
:
Tag
Emai
lPh
one
No.
Fax
No.
Stat
e/Pr
ovin
ce
Com
pany
Nam
e
Qua
ntity
(as s
peci
�ed
belo
w):
If un
its o
f di�
eren
t siz
e, ty
pe o
r oth
er o
ptio
n ar
e re
quire
d, p
leas
e at
tach
add
ition
al fo
rm(s
) with
thei
r spe
ci�c
atio
n(s)
sepa
rate
ly.
Addr
ess
Ord
er N
o.
Com
pany
Nam
e
Addr
ess
Stat
e
Zip
Code
/Pos
tal C
ode
Zip
CodeDat
e
V36
Dry
Spr
inkl
er w
ith In
tegr
al S
tyle
AB
6 As
sem
bly
NO
TE: A
ll sy
stem
s are
PO
A. C
onta
ct C
usto
mer
Car
e fo
r pric
ing.
Sprin
kler
Fr
ame
Clas
sSp
rinkl
erTh
read
Sprin
kler
Fini
shDe
�ect
or
Styl
eSp
rinkl
erRe
spon
seSp
rinkl
erK-
Fact
orSp
rinkl
erTe
mpe
ratu
reHo
se
Leng
thBr
acke
tSt
yle
Hose
Styl
eEs
cutc
heon
M
ater
ial
Nipp
le
❑ 1
- 1" B
SPT
❑ 2
- 1" N
PT❑
A - V
icFlex
™❑
36 -
V36
Sprin
klers
❑ B
- STD
PEND
❑ C
- HOR
SIDEW
ALL
❑ 3
- 1" N
PT❑
A - 1
35°F
/57°
C❑
C - 1
55°F
/68°
C❑
F - 2
00°F
/93°
C❑
J - 2
86°F
/141
°C
❑ S
- Sta
ndar
d❑
Q - Q
uick
❑ 4
- 5.6
❑ 5
- 8.0
❑ 0
- Cold
Rolle
d Ste
el❑
N - V
C250
❑ 2
- Chr
ome
❑ 4
- Whit
e (R
AL 90
10)
❑ N
- VC2
50
❑ A
B6 - A
B6
Escu
tche
onSt
yle
❑ 1
1 - Fl
ush
❑ 1
3 - Sl
eeve
an
d Skir
t
❑ 2
- 31"
❑ 3
- 36"
❑ 4
- 48"
❑ 5
- 60"
❑ 6
- 72"
Free
zer W
all
Thick
ness
¼"
ADi
men
sion
¼"
❑ 0
30 - 3
"❑
040
- 4"
❑ 0
50 - 5
"❑
060
- 6"
❑ 0
70 - 7
"❑
080
- 8"
❑ 0
90 - 9
"❑
100
- 10"
❑ 1
10 - 1
1"❑
120
- 12"
❑ 2
- AH2
Ho
se❑
0
ADi
men
sion
Inch
es
❑ 1
1❑
16
❑ 1
8❑
20
❑ 2
2❑
24
❑ 2
6❑
28
❑ 3
0
A3
00
22
36AB
6
VICTAULIC.COM PL2017-FP5-6
VicFlex™ Sprinkler Fitting Systems S
ECTI
ON
5
VICFL
Ex™
SPR
INk
LER
FIT
TIN
G S
YSTE
MS
V36 Dry Sprinkler with Style AB6 Accessories
V36 Dry Sprinkler with Style AB6 Accessories AB6 Optional Accessories
Approx. Wgt. Ea. lb
Victaulic Part No. Price Each
Style AB6 Installation Toggle 0.3 A000AQBTOG $21.00Spacer/Lockwasher Kit – K000AB6SPR 96.00Right Angle Adapter – JM83AB6RAA 45.50Wrench – ST10AQBAB6 101.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series AQC-U for Clean Room Applications
Series AQC-U
FOR CLEAN ROOM APPLICATIONSRefer to publication 10.86
Size Approx. Wgt. Ea. Victaulic Priceinches lb Part No. Each
36 x Z\x 2.8 A36HAQC000 $387.5048 x Z\x 3.2 A48HAQC000 407.5072 x Z\x 4.0 A72HAQC000 503.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Approved for use with M+W Zander Facility Engineering GmbH. Other cleanroom ceiling manufacturers can be evalu-ated and potentially approved on a case-by-case basis. Please refer to publication 10.86 for more information.
Series AQD For Duct Systems
Series AQD
FOR dUCT SYSTEMSRefer to publication 10.87
SizeBase Mount
RadiusRound duct
dia.Approx. Wgt.
Ea. Victaulic Priceinches inches lb Part No. Each
24 x Z\x 6.1 Round 12 – 14 2.2 A24HAQD96R $854.509.4 Round 16 – 24 2.2 A24HAQD99R 854.50
18.9 Round 26 – 72 2.2 A24HAQD91R 854.50Square N/A 2.2 A24HAQD96S 854.50
48 x Z\x 6.1 Round 12 – 14 2.6 A48HAQD96R 938.509.4 Round 16 – 24 2.6 A48HAQD99R 938.50
18.9 Round 26 – 72 2.6 A48HAQD91R 938.50Square N/A 2.6 A48HAQD96S 938.50
72 x Z\x 6.1 Round 12 – 14 3.1 A72HAQD96R 1057.509.4 Round 16 – 24 3.1 A72HAQD99R 1057.50
18.9 Round 26 – 72 3.1 A72HAQD91R 1057.50Square N/A 3.1 A72HAQD96S 1002.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-7
VicFlex™ Sprinkler Fitting Systems
VICTAULIC.COM PL2017-FP
SECTIO
N 5
VIC
FLEx™
SPR
INk
LER FITTIN
G SYS
TEMS
VicFlex™ Dry Sprinkler Model VS1
VicFlex™ Dry Sprinkler Model VS1
RECESSEd OR SLEEVE ANd SkIRT PENdENT OR SIdEWALL, CONCEALEd PENdENT
1” NPT THREAd k5.6Refer to publication 10.91
Length Approx. Wgt. Ea. Box Price Each
inches lb Quantity †
V3505, V3506, V3509, V3510
Recessed or Sleeve and Skirt Pendent
or SidewallV3517, V3518
Concealed Pendent38 3.9 5 $489.50 $541.0050 4.3 5 523.50 576.0058 4.6 5 558.50 611.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Concealed cover plates must be ordered separately.
† Sold in box quantities of five (5) only.
Flat PlateConcealed Pendent
RecessedPendent
Sleeve and SkirtPendent
RecessedSidewall
Sleeve and SkirtSidewall
– – – – – – – – – – 12A S 4 4 W3 B35 380J
Class Style ThreadDe�ector
Style Response K FactorTemperature Finish
RecessedEscutcheon
Material Code InchesEscutcheon
Style †
Model VS1 Figure Configuration
380 = 38"500 = 50"580 = 58"
35 = V35
A 4 = K5.6Q = QuickS = Std.
3 = 1" NPT8 = 25 mm BSP
12 = Recessed13 = Sleeve and Skirt15 = Concealed
A = 135°F/57°CC = 155°F/68°CE = 175°F/79°CF = 200°F/93°CJ = 286°F/141°C
W = White Stainless SteelX = Stainless Steel
4 = WhiteN = VC-250 ‡0 = Concealed
B = PendentC = Horizontal SidewallP - Concealed
Size
Model VS1 Cover Plates
REPLACEMENT VS1 COVER PLATES
Finish135° F/57° C 165°F/74°C
Part Code Price Part Code PriceChrome A35-06A-0020 $21.50 S35-06D-0020 $21.50
Bright Brass A35-06A-0030 21.50 S35-06D-0030 21.50White A35-06A-0040 21.50 S35-06D-0040 21.50
Custom A35-06A-00_0 + S35-06D-00_0 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Sold in box quantities of five (5) only.
For custom finishes, contact Victaulic for details.
VICTAULIC.COM PL2017-FP5-8
VicFlex™ Sprinkler Fitting Systems S
ECTI
ON
5
VICFL
Ex™
SPR
INk
LER
FIT
TIN
G S
YSTE
MS
VicFlex™ Dry Sprinkler Brackets
VicFlex™ Dry Sprinkler Brackets Bracket Size
Approx. Wgt. Ea. Victaulic Box Price
description inches lb Part No. Quantity † EachStyle VB1
– 0.2 A000000SLV 5 $35.50Wood and metal stud or joistStyle VB2 24 1.5 A24TBAR000 5 105.50Recessed pendent, suspended lay-in tile ceilings 48 2.7 A48TBAR000 5 133.00
Style VB3 24 1.6 A240AQBVB3 5 105.50Concealed pendent, suspended lay-in tile ceilings 48 2.9 A480AQBVB3 5 133.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Sold in box quantities of five (5) only.
5-9
VicFlex™ Sprinkler Fitting Systems
VICTAULIC.COM PL2017-FP
SECTIO
N 5
VIC
FLEx™
SPR
INk
LER FITTIN
G SYS
TEMS
SECTION 6 – Vic-Press™ System, for Schedule 10S Stainless Steel Pipe
Vic-Press™ System for Schedule 10S Stainless Steel Pipe
6-1VICTAULIC.COM PL2017-FP
™ Vic-Press™ System for Type 304 Schedule 10S Stainless Steel PipeThe Victaulic® Vic-Press™ System for joining Schedule 10S Type 304 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule 10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimen-sioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.
The Vic-Press™ Schedule 10S System requires no flame or arc as with welding, and no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling or fitting is pressed onto the pipe in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9.
Vic-Press™ Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex G Certified for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kPa service for above ground sprinkler systems.
Vic-Press 304Seal Selection
Seal Selection
(Unless specified otherwise, Grade “H” seals will be supplied)
GRAdETEMP.
RANGE* COMPOUNdCOLOR COdE GENERAL SERVICE GUIdELINES
STANdARd SEAL
H –20°F to +210°F HNBRTwo
OrangeStripes
May be specified for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and min-eral oils, engine oil and transmission oil. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372.
OPTIONAL SEALS – Contact Victaulic for delivery time
E –30°F to +250°F EPDM GreenStripe
May be specified for hot water service, dilute acids, oil-free air, chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM OR STEAM SERVICES.
O +20°F to +300°F Fluoro-elastomer
BlueStripe
May be specified for oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids, and air with hydrocarbons. NOT COMPATIBLE FOR USE WITH HOT WATER OR STEAM SERVICES.
* Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
VICTAULIC.COM PL2017-FP6-2
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
WARNING• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products Installation Instructions” (I-P500) and the operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.
Style P500 Loose Seals
Style P500
LOOSE SEALSRefer to publication 18.12
STYLE P500 – SPARE PARTS – LOOSE SEALS
Nominal Size Price Each †
inchesStandard Grade “H” HNBR or Grade “E” EPdM
SealZ\x $8.50C\v 9.501 12.00
1Z\x 15.502 21.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P597 Standard Coupling
Style P597
STANdARd COUPLING
(P X P)Refer to publication 18.12
STYLE P597 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.2 $54.50C\v 0.3 60.001 0.5 68.00
1Z\x 0.7 91.002 1.0 119.50
† Specify choice clearly on order.
Style P596 Male Adapter – Threaded
Style P596
MALE AdAPTER – THREAdEd
(P X M)Refer to publication 18.12
STYLE P596 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or Grade “E”
EPdM SealZ\x x Z\x 0.3 $102.00C\v x Z\x 0.4 106.00
C\v 0.4 106.001 0.5 123.00
1 x C\v 0.5 126.001 0.6 126.00
1Z\x x C\v 0.8 234.001Z\x 1.0 209.50
2 x 2 1.4 258.50
† Specify choice clearly on order.
6-3
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Series P569 Type 316 Stainless Steel Ball Valve
Series P569
TYPE 316 STAINLESS STEEL BALL VALVE WITH LOCkING HANdLERefer to publication 18.12
P x P
P x G
G x G
For Series P569 pricing, please refer to Series P569 in the Type 316 section.
Series P589 Brass Body Ball Valve
Series P589
VIC-PRESS™ SCHEdULE 10S SYSTEM BRASS BOdY BALL VALVE
Stainless Steel Vic-Press™ Type 304 Schedule 10S EndsRefer to publication 18.12
SERIES P589 – VIC-PRESS™ SCHEdULE 10S ENdS WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each End to End Price Each †
inches lb Inches
Standard Grade “H” HNBR or Grade “E”
EPdM SealZ\x 1.0 9.03 $321.00C\v 1.6 9.12 353.001 2.8 10.11 422.50
1Z\x 4.7 11.18 592.502 6.9 12.69 725.00
† Specify choice clearly on order.
Style P586 90° Elbow – Short Tangent
Style P586
90° ELBOW – SHORT TANGENT
(P X P)Refer to publication 18.12
STYLE P586 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.3 $101.50C\v 0.4 114.001 0.8 135.50
1Z\x 1.4 267.502 2.0 341.50
† Specify choice clearly on order.
VICTAULIC.COM PL2017-FP6-4
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
Style P542 90° Street Elbow
Style P542
90° STREET ELBOW
(P X T)Refer to publication 18.12
STYLE P542 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.3 $101.50C\v 0.4 114.001 0.7 135.50
1Z\x 1.4 267.502 2.0 341.50
† Specify choice clearly on order.
Style P591 45° Elbow
Style P591
45° ELBOW
(P X P)Refer to publication 18.12
STYLE P591 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.2 $90.50C\v 0.4 100.001 0.8 119.00
1Z\x 1.7 233.002 2.5 298.00
† Specify choice clearly on order.
Style P543 45° Street Elbow
Style P543
45° STREET ELBOW
(P X T)Refer to publication 18.12
STYLE P543 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.2 $90.50C\v 0.4 100.001 0.8 119.00
1Z\x 1.7 233.002 2.5 298.00
† Specify choice clearly on order.
6-5
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Style P592 Tee
Style P592
TEE
(P X P X P)Refer to publication 18.12
STYLE P592 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.4 $184.00C\v 0.5 203.001 0.9 217.50
1Z\x 1.5 278.002 2.1 346.00
† Specify choice clearly on order.
Style P593 Tee – Reducing Branch
Style P593
TEE – REdUCING BRANCH
(P X P X P)Refer to publication 18.12
STYLE P593 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealC\v x C\v x Z\x 0.5 $205.001 x 1 x Z\x 0.8 211.50
C\v 0.8 216.501Z\x x 1Z\x x Z\x 1.2 255.00
C\v 1.3 258.001 1.4 259.00
2 x 2 x Z\x 1.7 332.00C\v 1.7 337.001 1.8 346.50
1Z\x 2.0 382.00
† Specify choice clearly on order.
Style P588 Tee – Reducing Branch – Threaded
Style P588
TEE – REdUCING BRANCH – THREAdEd
(P X P X F)Refer to publication 18.12
STYLE P588 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x x Z\x x Z\x 0.4 $278.00C\v x C\v x Z\x 0.5 301.00
C\v 0.6 304.001 x 1 x Z\x 0.9 306.00
C\v 0.9 307.001 1.1 333.50
1Z\x x 1Z\x x Z\x 1.4 346.50C\v 1.5 350.501 1.5 382.50
2 x 2 x Z\x 1.7 395.00C\v 1.7 399.001 2.0 427.50
† Specify choice clearly on order.
VICTAULIC.COM PL2017-FP6-6
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
Style P594 Concentric Reducer
Style P594
CONCENTRIC REdUCER
(P X P)Refer to publication 18.12
STYLE P594 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or Grade “E”
EPdM SealC\v x Z\x 0.5 $166.501 x Z\x 0.6 224.00
C\v 0.7 178.001Z\x x Z\x 0.9 314.50
C\v 1.0 295.001 1.1 164.50
2 x Z\x 1.2 583.00C\v 1.3 263.001 1.4 203.00
1Z\x 1.6 203.00
† Specify choice clearly on order.
Style P595 Flange Adapter
Style P595
FLANGE AdAPTER
(P X L)Refer to publication 18.12
STYLE P595 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 2.2 $749.00C\v 2.3 771.501 2.8 783.00
1Z\x 3.6 954.002 5.8 1062.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P565 Flange Adapter
Style P565
FLANGE AdAPTER (VAN STONE TYPE)
(P X L)Refer to publication 18.12
STYLE P565 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 2.4 $262.00C\v 2.5 262.001 3.0 353.00
1Z\x 4.1 388.502 6.8 417.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
6-7
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Style P587 Transition Nipple
Style P587
TRANSITION NIPPLE
(T X G)Refer to publication 18.12
STYLE P587
Nominal Size
Approx. Weight
Each Unit End to End Priceinches lb Inches Each
C\v 0.3 4 $138.501 0.5 4 143.00
1Z\x 0.7 4 179.002 0.9 4 187.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P584 Threaded Union
Style P584
THREAdEd UNION **
(P X P)Refer to publication 18.12
STYLE P584 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 3.0 $615.50C\v 3.7 699.001 4.3 850.50
1Z\x 6.0 1453.502 6.8 1791.50
† Specify choice clearly on order.
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-dard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
Style P599 Female Adapter – Threaded
Style P599
FEMALE AdAPTER – THREAdEd
(P X F)Refer to publication 18.12
STYLE P599 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or Grade “E”
EPdM SealZ\x x Z\x 0.3 $124.50C\v x Z\x 0.3 125.00
C\v 0.4 127.501 x Z\x 0.7 134.50
C\v 0.6 143.501 0.6 152.50
1Z\x x 1 1.0 240.501Z\x 1.0 302.00
2 x 1Z\x 1.3 297.502 1.2 327.50
† Specify choice clearly on order.
VICTAULIC.COM PL2017-FP6-8
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
Style P561 Adapter
Style P561
WELd AdAPTER
(P X T)Refer to publication 18.12
STYLE P561 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.3 $99.50C\v 0.4 102.501 0.6 121.50
1Z\x 0.9 211.502 1.4 250.00
† Specify choice clearly on order.
Style P540 End Cap
Style P540
ENd CAPRefer to publication 18.12
STYLE P540
Nominal Size
Approx. Weight Each Price
inches lb EachZ\x 0.1 $127.00C\v 0.1 140.501 0.3 149.50
1Z\x 0.4 191.502 0.5 238.50
PFT510 Vic-Press Tool
PFT510 Vic-Press 10S Tool
The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool
6-9
Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
™ Vic-Press™ System for Type 316 Schedule 10S Stainless Steel PipeThe Victaulic® Vic-Press™ System for joining Schedule 10S Type 316 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule 10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimen-sioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.
The Vic-Press™ Schedule 10S System eliminates the need for flame as in welding, no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf stan-dard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling is pressed onto the pipe and fitting in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9.
Vic-Press™ Type 316 couplings and fittings are recommended for varying concentra-tions of hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, as well as automotive fluids such as engine oil and transmis-sion fluid within the temperature range of –20°F to +210°F/–29°C to +98°C. UL Classified in accordance with ANSI/NSF 61 Annex G for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kPa service for above ground sprinkler systems.
Vic-Press 316Seal Selection
Seal Selection
(Unless specified otherwise Grade “H” seals will be supplied)
GRAdETEMP.
RANGE* COMPOUNdCOLOR COdE GENERAL SERVICE GUIdELINES
STANdARd SEAL
H –20°F to +210°F HNBRTwo
OrangeStripes
May be specified for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and min-eral oils, engine oil and transmission oil. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372.
OPTIONAL SEALS – Contact Victaulic for delivery time
E –30°F to +250°F EPDM GreenStripe
May be specified for hot water service, dilute acids, oil-free air, chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM OR STEAM SERVICES.
O +20°F to +300°F Fluoro-elastomer
BlueStripe
May be specified for oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids, and air with hydrocarbons. NOT COMPATIBLE FOR USE WITH HOT WATER OR STEAM SERVICES.
* Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
VICTAULIC.COM PL2017-FP6-10
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
WARNING• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products Installation Instructions” (I-P500) and the operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.
Style P500 Loose Seals
Style P500
LOOSE SEALSRefer to publication 18.11
STYLE P500 – SPARE PARTS – LOOSE SEALS
Nominal Size Price Each †
inchesStandard Grade “H” HNBR or Grade “E” EPdM
SealZ\x $8.50C\v 9.501 12.00
1Z\x 15.502 21.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P507 Standard Coupling
Style P507
STANdARd COUPLING
(P X P)Refer to publication 18.11
STYLE P507 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.2 $61.00C\v 0.3 69.001 0.5 77.50
1Z\x 0.7 107.002 1.0 155.50
† Specify choice clearly on order.
Style P576 Male Adapter – Threaded
Style P576
MALE AdAPTER – THREAdEd
(P X M)Refer to publication 18.11
STYLE P576 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or Grade “E”
EPdM SealZ\x x Z\x 0.3 $105.50C\v x Z\x 0.4 110.00
C\v 0.4 110.001 0.5 126.50
1 x C\v 0.5 129.501 0.6 129.50
1Z\x x C\v 0.8 236.501Z\x 1.0 268.00
2 x 2 1.4 348.00
† Specify choice clearly on order.
6-11
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Style P508 Slip Coupling
Style P508
SLIP COUPLING
(P X P)Refer to publication 18.11
STYLE P508 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.3 $71.50C\v 0.4 77.501 0.7 89.00
1Z\x 1.1 114.002 1.6 146.00
† Specify choice clearly on order.
Series P569 Stainless Steel Ball Valve
Series P569
TYPE 316 STAINLESS STEEL BALL VALVE WITH LOCkING HANdLERefer to publication 18.11
P x P
P x G
G x G
SERIES P569 – VIC-PRESS SCHEdULE 10S x VIC-PRESS SCHEdULE 10S (P x P)
Nominal SizeApprox.
Weight Each End to End
Price Each Vic-Press x Vic-Press
(P x P) †
inches lb Inches
Standard Grade “H” HNBR or Grade “E”
EPdM SealZ\x 1.5 8.26 $429.00C\v 2.4 8.36 499.001 3.6 8.77 600.00
1Z\x 6.9 9.76 930.502 9.5 9.83 1248.00
SERIES P569 VIC-PRESS SCHEdULE 10S x GROOVEd (P x G)
Nominal SizeApprox.
Weight Each End to End
Price Each Vic-Press x Grooved
(P x G) †
inches lb Inches
Standard Grade “H” HNBR or Grade “E”
EPdM SealC\v 2.4 8.54 $499.001 3.6 8.75 600.00
1Z\x 6.9 10.9 930.502 9.5 12.11 1248.00
SERIES P569 GROOVEd x GROOVEd (G x G)
Nominal SizeApprox.
Weight Each End to End Price Each
inches lb InchesGrooved x Grooved
(G x G)C\v 2.4 8.44 $433.501 3.6 8.76 525.50
1Z\x 6.9 10.32 828.502 9.5 10.92 1099.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
VICTAULIC.COM PL2017-FP6-12
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
Series P569 Repair Kits
Series P569
REPAIR kITSRefer to publication 18.11
SERIES P569 REPAIR kITS
Nominal Size Price Each
inches Repair kitType 316 Stainless Steel
Ball StemZ\x $54.50 $81.00 +
C\v 55.50 77.00 +1 70.50 96.00 +
1Z\x 145.50 207.50 +2 217.50 352.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Series P589 Brass Body Ball Valve
Series P589
VIC-PRESS™ SCHEdULE 10S SYSTEM BRASS BOdY BALL VALVE
Stainless Steel Vic-Press™ Type 316 Schedule 10S EndsRefer to publication 18.11
SERIES P589 – VIC-PRESS™ SCHEdULE 10S ENdS WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each End to End Price Each †
inches lb Inches
Standard Grade “H” HNBR or Grade “E”
EPdM SealZ\x 1.0 9.03 $327.50C\v 1.6 9.12 359.001 2.8 10.11 430.50
1Z\x 4.7 11.18 706.002 6.9 12.69 899.00
† Specify choice clearly on order.
Style P568 90° Elbow – Short Tangent
Style P568
90° ELBOW – SHORT TANGENT
(P X P)Refer to publication 18.11
STYLE P568 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.3 $194.00C\v 0.4 218.501 0.8 245.00
1Z\x 1.4 331.002 2.0 454.00
† Specify choice clearly on order.
Style P562 90° Street Elbow
Style P562
90° STREET ELBOW
(P X T)Refer to publication 18.11
STYLE P562 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.3 $194.00C\v 0.4 218.501 0.7 245.00
1Z\x 1.4 331.002 2.0 454.00
† Specify choice clearly on order.
6-13
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Style P571 45° Elbow
Style P571
45° ELBOW
(P X P)Refer to publication 18.11
STYLE P571 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.2 $178.00C\v 0.4 191.501 0.8 214.50
1Z\x 1.7 287.502 2.5 394.50
† Specify choice clearly on order.
Style P563 45° Street Elbow
Style P563
45° STREET ELBOW
(P X T)Refer to publication 18.11
STYLE P563 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.2 $178.00C\v 0.4 191.501 0.8 214.50
1Z\x 1.7 287.502 2.5 394.50
† Specify choice clearly on order.
Style P572 Tee
Style P572
TEE
(P X P X P)Refer to publication 18.11
STYLE P572 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 0.4 $418.00C\v 0.5 452.501 0.9 474.00
1Z\x 1.5 558.502 2.1 688.50
† Specify choice clearly on order.
VICTAULIC.COM PL2017-FP6-14
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
Style P573 Tee – Reducing Branch
Style P573
TEE – REdUCING BRANCH
(P X P X P)Refer to publication 18.11
STYLE P573 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealC\v x C\v x Z\x 0.5 $477.001 x 1 x Z\x 0.8 518.50
C\v 0.8 539.501Z\x x 1Z\x x Z\x 1.2 762.00
C\v 1.3 767.501 1.4 786.00
2 x 2 x Z\x 1.7 890.50C\v 1.7 917.001 1.8 1021.50
1Z\x 2.0 1048.50
† Specify choice clearly on order.
Style P578 Tee – Reducing Branch Threaded
Style P578
TEE – REdUCING BRANCH THREAdEd
(P X P X F)Refer to publication 18.11
STYLE P578 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x x Z\x x Z\x 0.4 $582.50C\v x C\v x Z\x 0.5 645.50
C\v 0.6 662.001 x 1 x Z\x 0.9 707.50
C\v 0.9 720.001 1.1 774.50
1Z\x x 1Z\x x Z\x 1.4 846.00C\v 1.5 876.501 1.5 911.50
2 x 2 x Z\x 1.7 933.00C\v 1.7 967.001 2.0 1024.50
† Specify choice clearly on order.
Style P574 Concentric Reducer
Style P574
CONCENTRIC REdUCER
(P X P)Refer to publication 18.11
STYLE P574 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or Grade “E”
EPdM SealC\v x Z\x 0.5 $195.501 x Z\x 0.6 249.00
C\v 0.7 184.001Z\x x Z\x 0.9 368.50
C\v 1.0 242.001 1.1 170.50
2 x Z\x 1.2 637.00C\v 1.3 278.501 1.4 209.00
1Z\x 1.6 209.00
† Specify choice clearly on order.
6-15
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Style P575 Flange Adapter
Style P575
FLANGE AdAPTER
(P X L)Refer to publication 18.11
STYLE P575 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 2.2 $761.00C\v 2.3 774.501 2.8 793.00
1Z\x 3.6 961.002 5.8 1067.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P566 Flange Adapter
Style P566
FLANGE AdAPTER (VAN STONE TYPE)
(P X L)Refer to publication 18.11
STYLE P566 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 2.4 $262.00C\v 2.5 262.001 3.0 353.00
1Z\x 4.1 388.502 6.8 417.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P577 Adapter Nipple
Style P577
AdAPTER NIPPLE
(T X G)Refer to publication 18.11
STYLE P577
Nominal Size
Approx. Weight Each Price
inches lb EachC\v 0.3 $142.501 0.5 147.50
1Z\x 0.7 184.502 0.9 192.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P585 Threaded Union
Style P585
THREAdEd UNION **
(P X P)Refer to publication 18.11
STYLE P585 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or
Grade “E” EPdM SealZ\x 3.0 $630.00C\v 3.7 726.001 4.3 886.50
1Z\x 6.0 1466.002 6.8 1937.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-dard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
VICTAULIC.COM PL2017-FP6-16
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel PipeSE
CTI
ON
6
VIC
-PR
ES
S™ F
OR
SCH
EdU
LE 1
0S
Style P579 Female Adapter – Threaded
Style P579
FEMALE AdAPTER – THREAdEd
(P X F)Refer to publication 18.11
STYLE P579 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL
Nominal Size
Approx. Weight Each Price Each †
inches lbStandard Grade “H” HNBR or Grade “E”
EPdM SealZ\x x Z\x 0.3 $139.00C\v x Z\x 0.3 145.00
C\v 0.4 147.001 x Z\x 0.7 154.50
C\v 0.6 163.501 0.6 172.00
1Z\x x 1 1.0 287.001Z\v 0.8 287.001Z\x 1.0 360.00
2 x 1Z\v 1.1 357.001Z\x 1.3 357.00
2 1.2 391.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P560 End Cap
P560
ENd CAPRefer to publication 18.11
STYLE P560 ENd CAP
Nominal Size
Approx. Weight Each Price
inches lb EachZ\x 0.1 $288.50C\v 0.1 312.001 0.3 327.50
1Z\x 0.4 385.502 0.5 474.50
PFT510 Vic-Press Tool
PFT510 Vic-Press 10S Tool
The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool
6-17
Vic-Press™ System For Type 316 Schedule 10S Stainless Steel Pipe
VICTAULIC.COM PL2017-FP
SECTIO
N 6
VIC
-PR
ES
S™ FO
R S
CH
EdU
LE 10
S
Section 7 – Pipe Preparation Tools
Pipe Preparation Tools
LEASE PURCHASE AGREEMENT
Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.
7-1VICTAULIC.COM PL2017-FP
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Field PortableVE12
Vic-Easy Roll Grooving Tools – Field Portable
VE12 VE12 is designed for manual grooving of C\v – 2”/20 – 50 mm steel, stainless steel, aluminum and PVC pipe.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE12 R000012VE0 17/20 $940.00 $2022.50VE12SS R200012VE0 17/20 940.00 2022.50
For tool rating capacity please reference publication 24.01.
VE26 S/C
VE26 VE26 is designed for manual grooving of 2 – 6”/50 – 150 mm steel, stainless steel, aluminum, PVC, and copper tube.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE26S – Steel, Stainless Steel R100026VE0 22/25 $893.00 $1917.50VE26C – Copper Tube R200026VE0 22/25 893.00 1917.50VE26SS – Lightwall Stainless Steel R700026VE0 22/25 893.00 1917.50VE26P – Aluminum and PVC Pipe R750026VE0 22/25 893.00 1917.50
For tool rating capacity please reference publication 24.01.
VE26/VE46 Power Drive Kit
VE26/VE46 Power Drive Kit
Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE26/VE46 Power Drive Kit R075-026-KIT 7/9 N/A $355.50
VE46
VE46 VE46 is designed for manual grooving of 3Z\x – 6”/90 – 150 mm steel, stainless steel, aluminum and PVC.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE46 – Steel R000046VE0 28/31 $981.50 $2319.00VE46P – Aluminum and PVC Plastic R200046VE0 28/31 981.50 2319.00
For tool rating capacity please reference publication 24.01.
VICTAULIC.COM PL2017-FP7-2
Pipe Preparation ToolsSE
CTI
ON
7
PIPE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE226 B/S/M/C/BSS/MSS/P
VE226 B/S/M/C/BSS/MSS/P †
VE226 is designed for use with a standard C\,”/10 mm square drive for roll feed with operator supplied ratchet wrench to roll groove C\v – 6”/20 – 150 mm steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per Month Tool
List Price ^VE226B – C\v – 1Z\x”/20 – 40 mm R2022260FS 27/42 $973.50 $2147.50VE226S – 1Z\v – 6”/32 – 150 mm R2002260FS 27/42 973.50 2147.50VE226M – 2 – 6”/50 – 150 mm R3002260FS 27/42 973.50 2147.50VE226C – 2 – 6”/50 – 150 mm R1002260FS 27/42 973.50 2147.50VE226BSS – C\v – 1Z\x”/20 – 40 mm R00X2260FS 27/42 973.50 2147.50VE226MSS – 2 – 6”/50 – 150 mm RXM02260FS 27/42 973.50 2147.50VE226P – 2 – 6”/50 – 150 mm Aluminum and PVC Plastic R6002260FS 27/42 973.50 2147.50
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
VE226 Power Drive Kit
VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive.
* Ridgid is a registered trademark of the Ridge Tool Company.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE226 Power Drive Kit † R700-226-KIT 75/115 N/A $3492.00
† Drive unit not included.
7-3
Pipe Preparation Tools
VICTAULIC.COM PL2017-FP
SECTIO
N 7
PIP
E P
REPA
RATIO
N TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Field FabricationVE106
Vic-Easy Roll Grooving Tools – Field Fabrication
VE106 Groove-N-Go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v – 3”/25 – 80 mm carbon steel roll sets; 4 – 6”/100 – 150 mm carbon steel rolls are installed.
Tool Model Part Number
Tool Weight/ Shipping Weight
lb.Rental
Per MonthTool
List PriceVE106 Groove-N-Go 110V R000106110 140/200 N/A $6764.50VE106 Groove-N-Go 220V R000106220 140/200 N/A 6764.50
For tool rating capacity please reference publication 24.01.
VE106 GROOVING ROLLS *
Pipe Material Part Number
Pipe Size Range
inches | mm
Purchase List Price
Each Set †
Standard – Carbon Steel and Sch. 40 Stainless
R912106UA6 1Z\v – 6/32 – 150 Upper $215.00R912106L03 1Z\v – 3/32 – 80 Lower 603.50R904106L06 4 – 6/100 – 150 Lower 603.50
Copper RR02106006 2 – 6/50 – 150 845.00Stainless RX RX12106L06 1Z\v – 6/32 – 150 Lower 667.50
EndSealRZ02106003 1Z\v – 3/32 – 80 883.00RZ04106006 4 – 6/100 – 150 883.00
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
206 Portable Roll Grooving Tool
VICTAULIC.COM PL2017-FP7-4
Pipe Preparation ToolsSE
CTI
ON
7
PIPE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE206 Portable Roll Grooving Tool
VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with standard roll sets for steel 1Z\v” – 6”/32 – 150 mm (4 – 6”/100 – 150 mm rolls are installed).
Tool Model Part NumberTool Weight
lbTool
List PriceVE206 – 110V with Ridgid* 700 Power Drive R000206MAS 244 $10005.00VE206 – 110V without power drive unit R000206MA1 220 7147.00
* Ridgid is a registered trademark of the Ridge Tool Company.
Other compatible power drive units are available upon request.
For tool rating capacity please reference publication 24.01.
VE206 GROOVING ROLLS *
Pipe Material Part Number
Pipe Size Range
inches | mm
Purchase List Price
Each Set †
Standard – Carbon Steel and Sch. 40 Stainless
R912106UA6 1Z\v – 6/32 – 150 Upper $215.00R912106L03 1Z\v – 3/32 – 80 Lower 603.50R904106L06 4 – 6/100 – 150 Lower 603.50
Copper RR02106006 2 – 6/50 – 150 845.00Stainless RX RX12106L06 1Z\v – 6/32 – 150 Lower 667.50
EndSealRZ02106003 1Z\v – 3/32 – 80 883.00RZ04106006 4 – 6/100 – 150 883.00
Any tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
7-5
Pipe Preparation Tools
VICTAULIC.COM PL2017-FP
SECTIO
N 7
PIP
E P
REPA
RATIO
N TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS
VE272SFS The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12”/50 – 300 mm roll sets; 8 – 12”/200 – 300 mm rolls are installed.
NOTE: Optional C\v/20 mm and 1 – 1Z\x”/25 – 40 mm grooving rolls available.
Requires a VPD752 or Ridgid 300 power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE272SFS R000272SFS 184/250 $1535.00 $8164.50^Optional Stabilizer (8 – 12”/200 – 300 mm only) R4002720FS – 1535.00 2218.50
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
VE272SFS GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches|mm
Purchase List Price
Each Set †
Standard
R900268001 C\v/20 $3138.00R900268002 1 – 1Z\x/25 – 40 2703.00R902272003 2 – 3Z\x/50 – 90 1518.50R904272006 4 – 6/100 – 150 1623.00R908272012 8 – 12/200 – 300 1809.50
CopperRR02272006 2 – 6/50 – 150 1881.50RR08272008 8/200 2643.50
Stainless RX
RX75268001 C\v/20 3138.00RX01268002 1 – 1Z\x/25 – 40 2703.00RX02272003 2 – 3Z\x/50 – 90 2117.00RX04272006 4 – 6/100 – 150 2271.00RX08272012 8 – 12/200 – 300 2275.00
EndSealRZ02272003 2 – 3Z\x/50 – 90 2470.50RZ04272006 4 – 6/100 – 150 2526.00RZ08272012 8 – 12/200 – 300 2628.50
PVC/AluminumRP02272003 2 – 3Z\x/50 – 90 1633.00RP04272006 4 – 6/100 – 150 +RP08272012 8/200 1973.50
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2017-FP7-6
Pipe Preparation ToolsSE
CTI
ON
7
PIPE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Shop FabricationVE268
Vic-Easy Roll Grooving Tools – Shop FabricationNOTE: All shop models shipped set for 220 power, unless specified otherwise.
VE268 † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase requires tool power to be hard wired by a local certified electrician.
Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12”/200 – 300 mm nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12”/50 – 300 mm pipe) * (8 – 12”/200 – 300 mm rolls are installed, unless otherwise specified).
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-ent incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVE268 – 220V R000268VE0 735/766 $3672.50 $33160.00^
^ For proper operation, a pipe stand is required. See Accessories for details.
For tool rating capacity please reference publication 24.01.
VE268 GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mm
Purchase List Price
Each Set †
Standard
R900268001 C\v/20 $3138.00R900268002 1 – 1Z\x/25 – 40 2703.00R902272003 2 – 3Z\x/50 – 80 1518.50R904272006 4 – 6/100 – 150 1623.00R908272012 8 – 12/200 – 300 1809.50
CopperRR02272006 2 – 6/50 – 150 1881.50RR08272008 8/200 2643.50
EndsealRZ02272003 2 – 3Z\x/50 – 90 2470.50RZ04272006 4 – 6/100 – 150 2526.00RZ08272012 8 – 12/200 – 300 2628.50
Stainless RX
RX75268001 C\v/20 3138.00RX01268002 1 – 1Z\x/25 – 40 3138.00RX02272003 2 – 3Z\x/50 – 80 2117.00RX04272006 4 – 6/100 – 150 2271.00RX08272012 8 – 12/200 – 300 2275.00
PVC/AluminumRP02272003 2 – 3Z\x/5- – 90 1633.00
RP04272L06 ^ 4 – 6/100 – 150 646.50RP08272012 8/200 1973.50
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ Lower roll only.
7-7
Pipe Preparation Tools
VICTAULIC.COM PL2017-FP
SECTIO
N 7
PIP
E P
REPA
RATIO
N TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Tool AccessoriesVPD752 Victaulic Power Drive
Vic-Easy Tool Accessories
Victaulic Power Drive – VPD752
Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source.
VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing.
Capacities: See appropriate tool. †
Optional: Universal Drive Shaft.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List Price Victaulic Power Drive – VPD752 – 110V R000752110 140/165 $1227.50 $8749.50Victaulic Power Drive – VPD753 – 220V R000753220 140/165 1227.50 8749.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VAPS112 Pipe Stand
VAPS112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12”/25 – 300 mm IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x”/368.3 mm for adjusting rod; 8Z\x”/215.9 mm leg adjustment; 23”/584.2 mm total
Min. Pipe Height from Floor: 23”/584.2 mm on 12”/300 mm pipe; 21”/533.4 mm on 1”/25 mm pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List Price VAPS 112 R000112PS0 190/220 $918.50 $6629.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VICTAULIC.COM PL2017-FP7-8
Pipe Preparation ToolsSE
CTI
ON
7
PIPE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Hole Cutting ToolsVHCT900
Hole Cutting Tools
VHCT900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option)
Capacities: 1 – 3Z\x”/25 – 90 mm holes for Z\x – 3”/15 – 80 mm Mechanical-T, Strapless Outlet connections.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVHCT900 – 110V R000900HCT 36/61 $1993.50 $6110.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x”/120 mm carbon and stainless steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet, and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate.
Capacities: 1 – 4Z\x”/25 – 120 mm holes for Z\x – 4”/15 – 100 mm Mechanical-T, Strapless Outlet connections.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceHCT908 R000908HCT 35/48 $824.00 $3727.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
Vic-Press™ ToolPFT510
Vic-Press™ Tool
PFT510 Vic-Press™ Tool
The Vic-Press™ tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and includes:
Case 1 – PFT510 Vic-Press™ tool, 2 batteries, 120 VAC charger, wire brush, and 1 tube of lubricant
Case 2 – Z\x”/15 mm, C\v”/20 mm, and 1”/25 mm jaws, 1Z\x”/40 mm and 2”/50 mm ring-jaws, ring-jaw adapter jaw, insertion gauge set
WARNING: The PFT510 Vic-Press™ tool is designed for use only with Vic-Press™ Schedule 10S system couplings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and property damage. Refer to TM-PFT510 for complete tool operating instructions.
Tool Model Part Number
Tool Weight/ Shipping Weight
lb #Tool
List PricePFT510 Vic-Press™ Tool – 110V R120510PFT 102 $10117.00
# Weight is for tool and complete set of jaws.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
7-9
Pipe Preparation Tools
VICTAULIC.COM PL2017-FP
SECTIO
N 7
PIP
E P
REPA
RATIO
N TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARNING• Always read and understand all operating and maintenance instructions before
attempting to use any Victaulic pipe preparation tools.Victaulic tool operating and maintenance manuals can also be located at victaulic.com.
• Any Victaulic pipe preparation tools must be used by trained operators ONLY. Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may result in serious personal injury, property damage, and/or product damage.
How to Order
How to Order When ordering tools or tool parts, please include the following information:A. PARTS ORDERS1. Tool Model Number. Example: VE272SFS. 2. Tool Serial Number. The serial number can be found on the tool name plate.3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump. 4. Where to send the part(s). Company Name, Address and Telephone Number5. Attention: Person’s Name6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.B. TOOL ORDERS1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number4. Attention: Person’s Name5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.C. TOOL RENTAL ORDER1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.
Terms and Conditions of Tool Rental
VICTAULIC.COM PL2017-FP7-10
Pipe Preparation ToolsSE
CTI
ON
7
PIPE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
TERMS AND CONDITIONS OF TOOL RENTAL1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the preparation of pipe
to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee.
2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1) year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)
3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon termination of the lease, or applied to any open invoices on the Lessee’s account, provided Lessee is not in default under any of the term of the lease and has returned leased property in good con-dition, less ordinary wear and tear.
4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.
5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party, without prior written consent of the Lessor.
6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein except as expressly set forth in this Lease.
7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee’s possession and Lessee shall keep the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the lessor with a valid sales tax exemption certificate for the state where the tool is delivered.
8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.
9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until returned, and Lessor shall also have the right to remove the leased property from Lessee’s premises, without recourse to any legal proceedings.
10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement tools and/or parts, without cost, upon return of the leased property to Lessor.
11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee’s fault or not, Lessee shall pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current Victaulic price list for Pipe Preparation tools.
12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of whatsoever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery, possession, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the termination of this Lease.
13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies:
(a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the Lessee.
(b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property.
(c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other process of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termination of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing.
(d) To terminate this lease as to any or all items of leased property.
(e) To pursue any other remedy at law or in equity.
Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all obligations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee’s obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or separately.
14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is com-menced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property, the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addition to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or remedies here-under or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors, administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid, it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.
7-11
Pipe Preparation Tools
VICTAULIC.COM PL2017-FP
SECTIO
N 7
PIP
E P
REPA
RATIO
N TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Terms and Conditions of Tool Sale
TERMS AND CONDITIONS OF TOOL SALEControlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic. Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
Minimum Order: $100.00 net for any single order.
Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.
Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $7.500 and over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written con-sent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
Weights: All weights are approximate shipping weights and subject to change without notice.
Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.
WARRANTYStandard product warranty applies. See Inside Back Cover.
NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.
VICTAULIC.COM PL2017-FP7-12
Pipe Preparation ToolsSE
CTI
ON
7
PIPE
PR
EPA
RAT
ION
TO
OLS
Terms and Conditions of Sale
Terms and Conditions of SaleCONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on inovice. Maximum legal interest rate charged thereafter.
MINIMUM INVOICE CHARGES: $100 net for any single order.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders having a net price value of $7500 and over, for shipment at one time to one destination into distributor stock, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $7500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet s hipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard (i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and without incurring obligation. For further information con-tact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.
Warranty, Victaulic Contact Information
WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.EFFECTIVE AUGUST 4, 2008
VICTAULIC® LOCATIONS
UNITED STATES ANDWORLD HEADQUARTERS4901 Kesslersville RoadEaston, PA 18040 USA1 800 PICK VIC1 800 742 5842(within North America)1 610 559 3300pickvic@victaulic.com
victaulic.com
MEXICO BRAZILCalle Circuito del MarquesNo 8 al 11Parque Industrial El MarquesMunicipio El MarquesQueretaro, MexicoCP 8624652 442 253 0066vical@victaulic.com
Av. Marquês de São Vincente446 Cj 1303Várzea da Barra Funda –São Paulo-SPCEP 01139-000 – Brazil55 11 3548 4280vicbr@victaulic.com
Effective April 1, 2017
victaulic.com
FIRE PROTECTION PRICE LIST
FIRE PROTECTION PRICE LIST
PL2017-FP 10678 REV A 04/2017VICTAULIC AND ALL OTHER VICTAULIC MARKS ARE THE TRADEMARKS OR REGISTERED TRADEMARKS OF VICTAULIC COMPANY, AND/OR ITS AFFILIATED ENTITIES, IN THE U.S. AND/OR OTHER COUNTRIES. © 2017 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
FIRE PROTECTION PRICE LISTPL2017-FP Effective April 1, 2017
COUPLINGS, FITTINGS, VALVES AND ACCESSORIES COUPLINGS, FITTINGS, VALVES AND ACCESSORIES
top related