concrete screws

92

Concrete Screws

Technical Helpline UK: 0800 731 4924 Technical Helpline ROI: 1 800 882 388

Customer Services UK: 0800 833 381Customer Services ROI: 1 800 946 791 www.itwcp.com

Tapcon®

Countersunk

Tapcon®

Hex Head

TAPCON® BLUE are available in smaller quantities. Refer to our Bagged Range on page 136.

TAPCON® BLUE High performance concrete anchor that cuts its own thread into concrete, brick and block

Applications

— Fast installation: Drill, Drive, Done

— Versatile: Slotted washered hex head version and Phillips flat head version available

— Available in 5mm & 6mm and lengths from 32 - 125mm, to cover a wide number of applications

— Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications

— No need to pre-spot holes, no inserts required

— Removable and adjustable

— Can be installed close to edges

Features and Benefits

M&E - FIXING ELECTRICAL ACCESSORIES:

M&E - SERVICES:

TIMBER TO CONCRETE:

METALWORK:

— Saddles — Back boxes — Cable clips

— Conduit clips — P clips — Cable cleats

— Ductwork — Site barriers — Temp safety rails

— Security fencing — Cable trays, channel — Suspended ceilings

— Formwork — Battens — Base plates

— Plywood backer boards

— Steel framing systems

— Railings, hand rails — Brackets and signs

— Fire protection — Insulation systems

to masonry

Drill Drive Done COUNTERSUNK HEX HEAD

Approvals

Installation

Materials

CONCRETE

SBCCi Approved

9759

Metro-Dade Approved

02-031-03

CBO Approved

3370

3900 UK ITWCP Product GUIDE 2017.indb 92 21/03/2017 11:53

93

Concrete Screws

Concrete Steel Multi-Material Masonry Plasterboard

*Kit includes: Condrive Sleeve, Phillips Drive Adaptor, Phillips Nº 2 Drive Bit, Phillips Nº 3 Drive Bit, 6.5mm Hex Socket, 8mm Hex Sockets, Drill Bit Holder, Hex Key, 4 x 110mm Drill Bit and 5 x 110mm Drill Bit.

Accessories for Tapcon® Countersunk & Hex Head

SDS+ Drill Bits for use with Condrive Sleeve

Description Hole Ø(mm) Drive Fixture Thickness

(mm)Anchor Length

(mm)Min Hole Depth

(mm)Min Embedment

(mm)Box Qty Code

3F32 4 PH2 0 - 7 32 35 25 100 921507

3F45 4 PH2 5 - 20 45 35 25 100 921508

3F70 4 PH2 30 - 45 70 35 25 100 921510

3F82* 4 PH2 42 - 57 82 35 25 100 921511

4F45 5 PH3 5 - 20 45 35 25 100 921514

4F57 5 PH3 17 - 32 57 35 25 100 921515

4F70 5 PH3 30 - 45 70 35 25 100 921516

4F100 5 PH3 60 - 75 100 35 25 100 921518

4F125 5 PH3 85 - 100 125 35 25 100 921519

Description Hole Ø(mm)

Across Flats (A/F)(mm)

Fixture Thickness (mm)

Anchor Length (mm)

Min Hole Depth(mm)

Min Embedment(mm)

Box Qty Code

3H32 4 6.5 0 - 7 32 35 25 100 921498

3H45 4 6.5 5 - 20 45 35 25 100 921499

3H57 4 6.5 17 - 32 57 35 25 100 921500

4H32 5 8 0 - 7 32 35 25 100 921501

4H45 5 8 5 - 20 45 35 25 100 921502

4H57 5 8 17 - 32 57 35 25 100 921503

4H70 5 8 30 - 45 70 35 25 100 921504

4H82 5 8 42 - 57 82 35 25 100 921505

4H100 5 8 60 - 75 100 35 25 100 921506

Description Thread Ø Box Qty Code

Threaded Rod Hanger Clip (TRH)* M8 - M10 100 011431

THREADED ROD HANGER FOR USE WITH TAPCON® PAN HEAD

Description Qty CodeCondrive Sleeve for SDS 1 921437

Drill Drive Adaptor for Condrive Sleeve 1 921160

Tapcon Condrive Drill Driver Installation Kit 1 921159*

Description Qty Code

SDS+ Hex 4.35 x 180mm Tapcon Drill Bit Up to 100mm

1 921137

SDS+ Hex 5.15 x 180mm Tapcon Drill Bit Up to 100mm

1 921154

SDS+ Hex6 x 180mm Tapcon Drill Bit Up to 100mm

1 920940

Accessories for Tapcon® Countersunk

Accessories for Tapcon® Hex Head

Description Qty Code6.5mm Hex Socket 1 921162

8mm Hex Socket 1 921163

Description Qty CodePhillips No 2 Drive Bit 1 921098

Phillips No 3 Drive Bit 1 921099

*Only use with mechanical fixings.

TAPCON® BLUE - CSK Head Type: Countersunk

Product Range

Accessories

Head Type: Hex HeadTAPCON® BLUE - HEX HEAD

SPIT

Mec

hani

cal

Anch

ors

- TAP

CON

®

3900 UK ITWCP Product GUIDE 2017.indb 93 21/03/2017 11:53