cl18 / 26 series, to iso 15407-1 - asco | home - fluid ... · pilot pressure: 1.8 to 10 bar ... 6*...
Post on 19-Aug-2018
215 Views
Preview:
TRANSCRIPT
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10472
Valv
es
Solenoid pilot actuated
Air pilot actuated
Technical Data • Operating Data
Technical Data
Solenoid pilot / air pilot actuated valvesFlow capacity (at 6 bar, ∆p 5 bar) CL18 Series = 400 Nl/min (with standard interface), 500 Nl/min (interface with enlarged cross-section)
CL26 Series = 800 Nl/min
Operating pressure: Standard Vacuum to 16 bar (with M12 connector vacuum to 10 bar)
Pilot pressure: 1.8 to 10 bar (with M12 connector max. to 8 bar)
Ambient temperature range: -20 °C to 80 °C
5-ported, 2-position and 3-position valves with spool and sleeve assemblyNl/min = 400 (CL18), 800 (CL26)CV = 0.4 (CL18), 0.8 (CL26)• Solenoid pilot or air pilot actuated• To ISO standard 15407-1• Housing made of anodized aluminium alloy• Lubricated or non-lubricated operation• AC or DC• Connector type C, to DIN EN 175301-803 (before DIN 43650) or type 17 mm or M12 connector (CL26 Series in 24 VAC/DC)• Sandwich pressure regulator possible (CL26 Series)• Several types of manual overrides • Protection IP 65/NEMA 4• For flow media please refer to Operating Instructions Compressed Air on page 823
Operating Data: Solenoid pilot actuated valvesVoltage: 24 VDC 110 VAC, 50 / 60 Hz
Power (Watt / VA): 1.9 4.3 / 3.6
Holding current (amps): 0.079 0.04 / 0.038
Response times [ms]CL18 single solenoid act. (5-port., 2-pos.) Energize 12 De-Energize 28 Energize 10 De-Energize 32
CL18 double solenoid act. (5-port., 2-pos.) Energize 10 De-Energize — Energize 10 De-Energize —
CL18 double solenoid act. (5-port., 3-pos.) Energize 10 De-Energize 28 Energize 10 De-Energize 28
CL26 single solenoid act. (5-port., 2-pos.) Energize 13 De-Energize 29 Energize 11 De-Energize 29
CL26 double solenoid act. (5-port., 2-pos.) Energize 11 De-Energize — Energize 11 De-Energize —
CL26 double solenoid act. (5-port., 3-pos.) Energize 11 De-Energize 29 Energize 11 De-Energize 29
5-port., 2-pos., single actuated, spring return
5-port., 2-pos., double actuated, detented
5-port., 3-pos., double actuated, open centre, "1" blocked, "4" & "2" relieved
5-port., 3-pos., double actuated, open centre, all ports blocked
5-port., 3-pos., double actuated, open centre, "1" connected with "2" & "4"
BA4
BB4
BB5
BB6
BB7
5-port., 2-pos., single actuated, spring return
5-port., 2-pos., double actuated, detented
5-port., 3-pos., double actuated, open centre, "1" blocked, "4" & "2" relieved
5-port., 3-pos., double actuated, open centre, all ports blocked
5-port., 3-pos., double actuated, open centre, "1" connected with "2" & "4"
PA4
PP4
PP5
PP6
PP7
MaterialBody: Aluminium alloy
Other parts: Steel, stainless steel, aluminium alloy or plastic
Static seals: NBR
Finish: Anodized or varnished
CL18 / 26 Series,to ISO 15407-1
181 BA 4 00 A O 000 61
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 473
Valves • OverviewHow to order: (example)
Valve Series and Port Size181 = CL18 Series
Port size 1/8 262 = CL26 Series
Port size 1/4
First Letter = "14" endSecond Letter = "12" end
BA = Single solenoid pilot actuated valve with spring return
BB = Double solenoid pilot actuated valve PA = Single air pilot actuated valve with
spring returnPP = Double air pilot actuated valve QA= Quick start valve, pilot actuated with
spring return
Function4 = 5-port., 2-pos. valve5 = 5-port., 3-pos. valve,
"1" blocked, "4" & "2" relieved6 = 5-port., 3-pos. valve,
all ports blocked 7 = 5-port., 3-pos. valve,
"1" connected with "4" & "2"
Base Version00 = Valve without base01 = Valve with sandwich speed control
(CL26 Series)
41 = Individual base to ISO15407-1 (before VDMA 24563)
42 = Individual base with enlarged cross-section
46 = Individual base to ISO 15407-1 (before VDMA 24563) with sandwich speed control (CL26 Series)
Voltage00 = Air pilot actuated30 = 110 VAC/50-60 Hz
(only for solenoid with connector type 17 mm)
61 = 24 VDC
Options000 = Without manual override (PA / PP-valves)
Non-locking manual override (BA / BB-valves)Internal pilot supply, non-locking manual override, M12 connector turned by 22.5° (only CL26 valves with M12 connector)
B16 = Solenoid turned by 180° (CL18 / 26 Series)
C02 = Locking manual override (BA / BB-valves)E04 = External Pilot supply
More options on request
Threads/FittingsO = Valve without baseG = G-thread in base N = NPTF-thread in base L = Communication Module (only CL18)
Actuation0 = Air pilot actuatedA = Connector type 17 mmC = Connector type C to DIN EN 175301-803
(before DIN 43650) only in 24 VDCZ = M12 connector (only to 10 bar)
CL26 Series
Order example: 181BA400AO00061
This refers to a Series CL18 single solenoid pilot actuated 5-port., 2-pos. valve with spring return. The valve has a standard non-locking manual override. The solenoid requires a female connector type 17 mm and the voltage is 24 V DC. The valve is delivered without base.
Solenoid pilot actuated valve(BA... BB...)
Air pilot actuated valve(PA.. PP..)
Solenoid pilot actuated valve(BA... BB...)
with M12 connector
CL18 / 26 Series,to ISO 15407-1
262 ES 3 00 O O 000 00
AK0 8 F 0000 2 G STD
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10474
Valv
es
How to Order Sandwich Pressure Regulators: (example)
Valve Series262 = CL26 Series
Regulator Type
ES = Single pressure to port 1ED = Dual pressure to ports 3 & 5EC = Dual pressure with non-relieving checksEQ = Dual pressure with relieving checksEE = Dual pressure to ports 2 & 4ET = 2 pressure selector
Options000 = Standard12H = Without gauge16N = Jumper on 14 end, pressure to port 316P = Jumper on 12 end, pressure to port 516W = 90° swivel elbowMore options on request
Pressure range
1 = 0.7 to 9 bar3 = 0.2 to 2 bar4 = 0.5 to 4 bar
Port TypeO = Sandwich pressure regulator without base
How to order manifold blocks: (example)
Valve Series 8 = CL18 Series 9 = CL26 Series
Number of Valve Stations
B = 2 StationsD = 4 StationsF = 6 StationsH = 8 StationsJ = 10 StationsL = 12 Stations
Options
STD = Standard version
Port Size End Plate2 = 1/4 (CL18)3 = 3/8 (CL26)
Sandwich pressure regulators • Manifolds • Overview
Regulator
O = Sandwich pressure regulator
Bases00 = Regulator without base01 = Regulator with sandwich speed
control41 = Individual base to ISO 15407-1
(before VDMA 24563)42 = Individual base enlarged cross-section46 = Individual base to ISO 15407-1
(before VDMA 24563) with sandwich speed control
Manifold blockCL18 Series
Manifold blockCL26 Series
Sandwich pressure regulatorsingle type (ES)
Sandwich pressure regulatordual type (ED)
Thread
G = G-threadN = NPTF-thread
CL18 / 26 Series,to ISO 15407-1
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 475
Sub-base mounted valve, single or double solenoid pilot actuatedwith connector type 17 mm
Valves • Dimensions
Sub-base mounted valve, single or double solenoid pilot actuatedwith connector type C
Sub-base mounted valve, single or double air pilot actuated
Dimensions [mm]Description A B C D E F G Weight approx. [kg]181BA400A.... 71.0 — 101.5 30.5 18.0 30.0 9.4 0.106
181BB4 / 5 / 6 / 700A.... 71.0 142.0 — — 18.0 30.0 9.4 0.144181BA400C.... 74.0 — 104.5 30.5 18.0 30.0 8.0 0.107
181BB4 / 5 / 6 / 700C.... 74.0 148.0 — — 18.0 30.0 8.0 0.146181PA4000.... — - 66.0 30.5 18.0 26.0 — 0.070
181PP4 / 5 / 6 / 7000.... 35.0 70.0 — — 18.0 26.0 — 0.072Incl. screws and gaskets
CL18 Series,to ISO 15407-1
C
A
R Q
E
JK
L
MN
103-561 C
51
3
12/82
14/84
24
F
P
D
B
HG
F
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10476
Valv
es
Bases • DimensionsIndividual base for solenoid pilot or air pilot actuated sub-base mounted valves
Dimensions [mm]A B C D E F G H J K L M N P Q R
67.0 59.0 26.5 4.5 28.0 G 1/8 14.5 8.0 23.0 14.5 10.5 16.0 40.4 M5 6.0 12.5Material: Anodized aluminium
NPTF-thread on request
Individual BasesSeries Weight Order Code
approx. [kg]
Interface to ISO 15407-1*
Enlarged cross-section
CL18 0.080 103-561 103-562*preferred stock item
Manifold block with lateral ports in G 1/8for solenoid pilot actuated sub-base mounted valves (common ports 12/82 and 14/84)
Dimensions [mm]
Stations A BWeight approx.
[kg]
Order Code
2* 60.0 47.0 0.318 106-7403 79.0 66.0 0.424 106-7414* 98.0 85.0 0.530 106-7425 117.0 104.0 0.636 106-7436* 136.0 123.0 0.724 106-7447 155.0 142.0 0.848 106-7458* 174.0 161.0 0.954 106-7469 193.0 180.0 1.060 106-747
10* 212.0 199.0 1.166 106-74812 250.0 237.0 1.378 106-749
*preferred stock item
C D E F G H J K L M N P Q R S T U V31.5 39.0 6.5 15.5 23.5 40.0 19.5 M5 20.5 19.0 G 1/4 2.3 6.2 13.5 32.0 G 1/8 60.0 4.4
Material: Anodized aluminium
NPTF-thread on request
CL18 Series,to ISO 15407-1
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 477
Bases • DimensionsManifold block with bottom ports in G 1/8for solenoid pilot actuated sub-base mounted valves (common ports 12/82 and 14/84)
Dimensions [mm]
Stations A B C DWeight approx.
[kg]
Order Code
2* 60.0 53.5 39.5 37.3 0.344 106-12193 79.0 72.5 58.5 56.3 0.453 106-12204* 98.0 91.5 77.5 72.3 0.562 106-12215 117.0 110.5 96.5 91.3 0.671 106-12226* 136.0 129.5 115.5 113.3 0.780 106-12237 155.0 148.0 134.5 132.3 0.888 106-12248* 174.0 167.5 153.5 151.3 0.997 106-12259 193.0 186.5 172.5 170.3 1.106 106-1226
10* 212.0 205.5 191.5 189.3 1.215 106-122712 250.0 243.5 229.5 227.3 1.433 106-1228
*preferred stock item
E F G H J K L M N P Q R S T U V W19.0 18.3 19.5 37.5 60.0 40.0 23.5 15.5 6.5 28.5 39.0 38.8 20.5 4.4 M5 G 1/8 G 1/4
Material: Anodized aluminium
NPTF-thread on request
(2x per station)
CL18 Series,to ISO 15407-1
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10478
Valv
es
E F G H J K L M N P Q R S T U V W Z6.0 15.5 22.5 40.0 19.5 M5 20.5 19.0 G 1/4 2.3 6.2 13.5 32.0 5.0 15.5 G 1/8 60.0 4.4
Material: Anodized aluminium
NPTF-thread on request
Manifold block with lateral ports in G 1/8for air pilot actuated sub-base mounted valves (ports 12/82 and 14/84 separate per valve)
Dimensions [mm]
Stations A B C DWeight approx.
[kg]
Order Code
2* 60.0 47.0 0.318 106-7503 79.0 66.0 0.424 106-7514* 98.0 85.0 28.5 39.0 0.530 106-7525 117.0 104.0 0.636 106-7536* 136.0 123.0 0.724 106-754
*preferred stock item
1x per station
1x per station
2x per station
CL18 Series,to ISO 15407-1
Manifold blocks • Dimensions
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 479
Valves • DimensionsSub-base mounted valve, single or double solenoid pilot actuatedwith connector type 17 mm
Sub-base mounted valve, single or double solenoid pilot actuatedwith connector type C
Sub-base mounted valve, single or double air pilot actuated
Dimensions [mm]Description A B C D E F G Weight approx. [kg]262BA400A.... 80.5 — 124.0 43.5 26.0 30.5 9.4 0.146
262BB4 / 5 / 6 / 700A.... 80.5 161.0 — — 26.0 30.5 9.4 0.174262BA400C.... 84.0 — 127.5 43.5 26.0 30.5 8.0 0.175
262BB4 / 5 / 6 / 700C.... 84.0 168.0 — — 26.0 30.5 8.0 0.216262PA4000.... 45.5 89.0 26.0 — — — — 0.132
262PP4 / 5 / 6 / 7000.... 45.5 89.0 26.0 — — — — 0.132Incl. screws and gaskets
CL 26 Series,to ISO 15407-1
Internal/External Pilot Selection
1 2 3
45 6 7 8 913 12 1011
A D
BC
A D
BC
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10480
Valv
es
Sandwich Pressure Regulators • Dimensions
Dimensions [mm]Series A B C D WeightType approx. [kg]
ES-Regulator, CL26 Series — 177.8 64.0 27.5 0.170ED-Regulator. CL26 Series 281.5 — 64.0 27.5 0.260Incl. screws and gaskets
Sandwich pressure regulator
Pos. Pieces Description1 2* Regulator2 8** Screw3 8** Lockwasher4 1 Regulator block5 2 Stud6 2 O-ring7 2* O-ring8 2* Hitch Pin9 2* Gauge
10 1 Name plate11 1 Gasket12 2* Gasket13 2* Adapter
* = for regulator type ES: 1 piece** = for regulator type ES: 4 pieces
DimensionsSub-base mounted valve, single or double solenoid pilot actuatedwith M12 connector
Solenoid pilot actuated valve(BA... BB...)
with M12 connector Dimensions [mm]Description A B C D Weight
approx. [kg]262BA400Z.... 127.1 62.6 38.5 26.3 0.350
262BB4 / 5 / 6 / 700Z.... 160.2 62.6 38.5 26.3 0.400Incl. screws and gaskets
CL26 Series,to ISO 15407-1
6
5
1
2
3
4
7
A
C
B
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 481
Description Order CodeSpare parts kit(Content as described
in list below)
239-1393
Pos. Pieces Description1 1 Adjustment screw (internal hex
socket)2 1 Spring3 1 Spring4 1 Piston assembly5 1 Spring6 1 Cover7 1 Gasket
Spare parts kit for sandwich pressure regulators
Description Order CodeSpare parts kit* regulator 0.2 to 2 bar 214-185Spare parts kit* regulator 0.3 to 4 bar 214-186Spare parts kit* regulator 0.7 to 9 bar 214-187* incl. regulator, gauge, screws, washer and gasket
Retaining clip
O-Ring
90° Elbow
90° Elbow
Description Order CodeElbow* 239-1217Retaining clip 131-236* incl. fitting clip and O-ring
Dimensions [mm] Description A B C Weight
approx. [kg]Order Code
Gauge up to max. 11 bar 29.5 15.5 23.5 0.008 214-215Gauge up to max. 4 bar 29.5 15.5 23.5 0.008 214-220* incl. O-ring
Gauge
Dimensions [mm] Description A B C Weight
approx. [kg]Order Code
Adapter, port size G 1/8 13.0 G 1/8 SW17 0.010 239-2048*Fitting clip - - - - 131-236* incl. O-Ring and fitting clip
Port in NPTF-thread on request
Sandwich Pressure Regulators • Accessories
CL26 Series,to ISO 15407-1
Tipo EE Tipo ET
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10482
Valv
es
Sandwich Pressure Regulators • SymbolsSandwich pressure regulators Types ES / ED / EC / EQ and EE
Type ES Type ED
Type EC Type EQ
Single pressure from a single supply. Dual pressure from a single supply.
Type EC is non-relieving: traps downstream pressure if upstream is exhausted
Type EQ is relieving:exhausts pressure in cylinder if upstram pressure is exhausted
External outlet regulator used with jumper plate for single or dual pressure
Two-pressure selector used for multi-pressure application.
CL26 Series,to ISO 15407-1
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 483
Individual bases for solenoid pilot or air pilot actuated sub-base mounted valves
F G H J K L M N P Q R S T U V Weight approx. [kg]
OrderCode
26.0 15.0 16.5 65.5 13.5 19.0 30.0 G 1/4 51.6 28.9 21.5 26.5 12.0 M5 70.0 0.213 103-564Material: Anodized aluminium
NPTF-thread on request
Dimensions [mm]Series A B C D ECL26 82.0 78.0 41.0 4.5 4.0
Bases • Dimensions
CL26 Series,to ISO 15407-1
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10484
Valv
es
Manifold block with lateral ports in G 1/4 for solenoid pilot actuated sub-base mounted valves (common ports 12/82 and 14/84)
J K L M N P Q R S T U V W X Y Z Z1 Z256.0 80.0 31.8 34.8 10.6 72.5 17.5 17.2 43.0 68.8 22.3 33.0 43.5 27.0 G 1/4 G 3/8 G 1/8 5.6
Material: Anodized aluminium
NPTF-thread on request
Dimensions [mm]
Stations A B C D E F G H I Weightapprox. [kg]
Order Code
2* 58.8 79.0 53.0 73.3 0.901 106-11353 85.8 106.0 80.0 100.3 1.208 106-11364* 112.8 133.0 107.0 127.3 1.516 106-11375 139.8 160.0 134.0 154.3 1.824 106-11386* 166.8 187.0 161.0 181.3 2.132 106-11397 193.8 214.0 188.0 208.0 2.440 106-11408* 220.8 241.0 215.0 235.3 2.747 106-11419 247.8 268.0 242.0 262.3 26.0 5.8 30.0 – 50.0 3.055 106-1142
10* 274.8 295.0 269.0 289.3 3.363 106-114311 301.8 322.0 296.0 316.3 3.671 106-114412 328.8 349.0 323.0 343.3 3.979 106-114513 355.8 376.0 350.0 370.3 4.286 106-114614 382.8 403.0 377.0 397.3 4.594 106-114715 409.8 430.0 404.0 424.3 4.902 106-114816 436.8 457.0 431.0 451.3 5.210 106-1149
*vorrangig lagerhaltig
2x per station
Bases • Dimensions
CL 26 Series,to ISO 15407-1
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10 485
CL26 Series,to ISO 15407-1
Manifold block with bottom ports in G 1/4for solenoid pilot actuated sub-base mounted valves (common ports 12/82 and 14/84)
2x per station
Bases • Dimensions
Dimensions [mm]
Stations A B C D E F G H I Weight approx. [kg]
Order Code
2* 57.0 79.0 53.0 73.3 0.901 106-11653 84.0 106.0 80.0 100.3 1.208 106-11664* 111.0 133.0 107.0 127.3 1.516 106-11675 138.0 160.0 134.0 154.3 1.824 106-11686* 165.0 187.0 161.0 181.3 2.132 106-11697 192.0 214.0 188.0 208.0 2.440 106-11708* 219.0 241.0 215.0 235.3 2.247 106-11719 246.0 268.0 242.0 262.3 26.0 5.8 30.0 — 50.0 3.055 106-1172
10* 273.0 295.0 269.0 289.3 3.363 106-117311 300.0 322.0 296.0 316.3 3.671 106-117412 327.0 349.0 323.0 343.3 3.979 106-117513 354.0 376.0 350.0 370.3 4.286 106-117614 381.0 403.0 377.0 397.3 4.594 106-117715 408.0 430.0 404.0 424.3 4.902 106-117816 435.0 457.0 431.0 451.3 5.210 106-1179
*preferred stock item
J K L M N P Q R S T U V W X Y Z Z1 Z256.0 80.0 30.0 53.5 32.5 72.5 17.5 17.2 43.0 68.8 22.3 33.0 43.5 27.0 G 1/4 G 3/8 G 1/8 5.6
Material: Anodized aluminium
NPTF-thread on request
www.numatics.com
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs.
Pneumatic Catalogue-GB-2008-10486
Valv
es
Bases • DimensionsBases • DimensionsManifold block with lateral ports in G 1/4for air pilot actuated sub-base mounted valves (separate ports 12/82 and 14/84)
Dimensions [mm]
Stations A B C D E F G H I Weight approx. [kg]
Order Code
2 58.0 79.0 53.0 73.3 0.900 106-7723 85.8 106.0 80.0 100.3 1.210 106-7734 112.8 133.0 107.0 127.3 26.0 5.8 30.0 18.2 50.0 1.516 106-7745 139.8 160.0 134.0 154.3 1.824 106-7756 166.8 187.0 161.0 181.3 2.132 106-776
On request: Order codes for manifold blocks with 7 to 13 stations
J K L M N P Q R S T U V W X Y Z Z1 Z256.0 80.0 31.8 34.8 9.9 68.8 4.0 9.9 17.2 43.0 22.3 33.0 — 27.0 G 1/4 G 3/8 M5 5.6
Material: Anodized aluminium
NPTF-thread on request
2x per station
1x per station
CL26 Series,to ISO 15407-1
1x per station
top related