civilian airfield lighting kit ledcdnairfield.com/downloads/metalite datasheets.pdf · civilian...
Post on 01-Nov-2018
226 Views
Preview:
TRANSCRIPT
Civilian Airfield Lighting Kit LED
NEW state of the art LED light engine technology
Road going trailer with up to 66 COREL LED lights
Charge and store multiple light variants
Universal power input
Rapid 20 minute deployment
Extensive run time
Simple ‘drop in’ charging
66 light units
Simple, drop-in charging
Fast recharge times
Road going trailer
Optional remote control facility
safeCALKIT LED is a versatile, battery-powered runway lighting system specifically designed for airport or airfield use. It will meet all relevant international standards relating to portable primary, supplementary, emergency or obstruction lighting and is suitable for use with both fixed and rotary wing aircraft.
easy tO useThe CALKIT LED road going trailer ensures that the system can be rapidly deployed in emergency situations, provides safe storage and easy charging of light units when not in operation and is easily transported when intended for use at more than one location.
reliaBleCALKIT LED offers true 365 days a year capability. When used at maximum intensity (125cd), edge lights provide 40 hours light output (280 hours at 50cd) before charging is necessary. Recharging is then achieved in only 8 hours ensuring operational readiness on consecutive nights.
wOrld leaderCALKIT LED is designed and manufactured by Metalite Aviation Lighting which has been at the forefront of portable airfield lighting design for over 40 years and is now recognised as the world’s leading supplier of trailer mounted systems to both civilian and military customers.
Civilian Airfield Lighting Kit LED
For remote airstrips where main lighting is not available.
To provide lighting on alternate runways or emergency landing areas.
To supplement the main lighting system in the event of partial failure.
As the main lighting system on airfields with no permanent lighting.
To mark temporary taxiway and manoeuvring areas by day and night.
To show the limits of obstructions and areas under repair by day and by night.
applications
1898
mm
1226
mm
1607mm
2720mm
3847mm
Civilian Omni-direCtiOnal runway edge light
runway end identifier light
PreCisiOn aPPrOaCh Path indiCatOr
metalite aviation lighting,
Fleets Point, Willis Way,
Poole, Dorset,
BH15 3SS, England
Telephone:+44 (0)1202 689099
Fax:+44 (0)1202 685670
Email: info@metaliteaviation.com
Web: www.metaliteaviation.com
Metalite is a trading division of
Aeronautical & General
Instruments Limited
www.agiltd.co.uk
specific elements
Bright – Up to 125cd of Omni-directional white light output
versatile – Full range of aviation colours available including split colours, battery powered and portable, weighing only 6.3kg. May be charged by either a dedicated freestanding charger or in CALKIT LED trailer.
light source – Ultra High Intensity LED
run time – 40hrs @ 125cd (White) 280hrs @ 50cd (White) 500hrs @ 25cd (White) 180hrs @ 9/20cd (Red/Green) 317hrs @ 15cd (Green) 500hrs @ 10cd (Red) 500hrs @ 2cd (Blue)
Bright – 15,000cd light output in compliance with FAA AC150/5345-51A L849 Style A-F
versatile – Battery powered and portable at only 8kg. May be charged by either a dedicated freestanding charger or in CALKIT LED trailer.
light source – Highly efficient state of the art LED light engine
run time – 18hrs @ 15,000cd
66hrs @ 5,000cd 181hrs @ 1,500cd 1111hrs @ 300cd
runway threshOld end light multi Operation – Like the COREL and REIL,
the RTEL is available in Manual, Radio or Photocell control
versatile – Battery powered and portable at only 7kg. May be charged by either a dedicated freestanding charger or in CALKIT LED trailer.
light source – Highly efficient state of the art LED light engine
run time – >300hrs
trailer Charging faCilities efficient – Drop in stowage for simple
deployment, recovery and charging
rapid deployment – Trailer may be towed to deployment area and lights deployed within 20 mins as recommended by ICAO Annex 14
road legislation – Meets European Whole Vehicle Type Approval
rugged and high Quality – Designed to provide 10+ years service
Power efficiency – The world’s most power-efficient portable/fixed PAPI solution
Bright – Full daytime output to ICAO and FAA standards 30,000/15,000cd for FAA 15,000/7,500cd for ICAO
versatile – Compact, battery powered, portable and no CCR required. Battery packs have integrated charger for ease and efficiency.
light source – Highly efficient state of the art unique LED light engine and optical system
run time – 100% – 15hrs (FAA Output)
50% – 31hrs 3% – 522hrs 100% – 34hrs (ICAO Output) 50% – 69hrs 3% –1151hrs
drop in Charging – Removes the need for cables and connections
Quick Charging – 95% capacity achieved in 8 hours
intelligent Charging – Automatic compensation ensures optimum battery life when charging
Power – Worldwide power input 95 – 250V AC
3845/0913
Civilian Omni-directional Runway Edge Light LED
Intuitive design to ensure optimum efficiency and performance
Up to 500 hours runtime between charge cycles
Medium intensity lighting up to 125 candela
Multiple application Runway edge, obstruction, taxiway, threshold/stop etc.
Radio controlled
ICAO & FAA compliant
NEW state of the art LED light engine technology
3845/0913
Metalite Aviation Lighting,
Fleets Point, Willis Way,
Poole, Dorset,
BH15 3SS, England
Telephone:+44 (0)1202 689099
Fax:+44 (0)1202 685670
Email: info@metaliteaviation.com
Web: www.metaliteaviation.com
Metalite is a trading division of
Aeronautical & General
Instruments Limited
www.agiltd.co.uk
*Approximate run times and subject to environmental conditions
Our new generation COREL LED is our flagship product, available in all major aviation colours for a range of airside applications with multiple intensities, flash modes, radio control and easy ‘drop in’ charging.
Metalite’s custom designed state of the art LED light source and unique lens arrangement provides the COREL LED with efficiency which is second to none, providing unrivalled battery run times and highly efficient charging cycles resulting in a lowered total cost of ownership.
Metalite’s historic outstanding build quality also ensures a low maintenance investment for your airside ground lighting requirements for many years to come. Whether used in conjunction with the CALKIT LED trailer or standalone drop in chargers, the COREL LED meets ICAO Annex 14 Vol 1 and FAA portable airfield lighting requirements to ensure compliance for your facility.
FEATURES & BENEFITS: Unique Optical Design
Improved light efficiency and battery running time
Ergonomic and Functional Construction Robust weatherproofing for endurance and efficient LED cooling
Drop in Charging Quick and easy handling when charging is required for re-deployment
MESH Network Technology Radio Control Remote operation from airfield or ATC tower
Status Indicator Battery and charging status displayed
Semi Permanent Fixings Aluminium fixing plates for secure fixing to the ground
Civilian Omni-directional Runway Edge Light LED
SPECIFICATIONSLIGHT CHARACTERISTICS
Light Source Ultra High Intensity LED
Available LED Colours White, Red, Green, Amber, Blue, Sector Red/Green, Amber/White
Circling Guidance (Optional) LED – Visual
Estimated Endurance Steady Light White LED 125cd (High 125cd, Med 50cd, Low 25cd) 40hrs, 280hrs, 500hrs*
Estimated Endurance Flashing Light White LED 125cd (High 125cd, Med 50cd, Low 25cd) 72hrs, 560hrs, 1000hrs*
LED Life Expectancy >60,000hrs
Horizontal Output 360°
Vertical Divergence FAA Spec 2° – 15°
Vertical Divergence ICAO Spec 0° – 15°
OPERATION
Function Manual Control, Photocell Control, Radio Control
Wireless Radio Receiver (Optional) 868 or 915Mhz MESH Network
Setup and Diagnostics Integrated Test Facility, Battery Status Indication
ELECTRICAL CHARACTERISTICS
Operating Temperatures -40°C - +60°C
Battery Type SLAB (Sealed Lead Acid Battery) air transport approved
Battery Capacity 14Ah
Nominal Voltage 12V
Circuit Protection Integrated
Charging Method Drop in Charging – Via CALKIT LED Trailer or Standalone Charger
Charging Time (Mains) 8hrs*
CONSTRUCTION
Body High Strength Colour Impregnated Polycarbonate
Dome Borosilicate Glass
Dimensions (HxWxD) 217 (excluding antenna) x 195 x 195mm
Weight 6.3kg (13.89lb)
IP Rating IP65, IP67
COMPLIANCE
CE Compliant
Environmental MIL Std 810F Series
EMC MIL Std 461F Series
Aviation FAA AC150/5345-46D-L-860 , L-860E, L-861
FAA AC150/5345-50B-L-863 Series
FAA AC150/5345-49C
ICAO Annex 14 Vol. 1 5.3.2, 5.3.9.8 (with circling guidance), 5.3.9.9
254m
m21
7mm
195mm
195m
m
Precision Approach Path Indicator LED
FULL PAPI (4 BOX) or‘A’ PAPI (2 box) system
Unique light engine & optical system
Radio controlled
Compact & rugged construction
Ultra low power consumption
NEW state of the art LED light engine technology
Digital inclinometer
LIGHT CHARACTERISTICS
Light Source Ultra High Intensity LED
Configurations Visible, IR (optional)
Light Output in Accordance with FAA-E-3007 AC 30,000cd / 15,000cd
Light Output In Accordance with ICAO Annex 14 Vol.1 15,000cd / 7,500cd
Colours Aviation White, Aviation Red
IR Output 880nm
Endurance Steady Light FAA (Low, Med, High) 522hrs, 31hrs, 15hrs
Endurance Steady Light ICAO (Low, Med, High) 1151hrs, 69hrs, 34hrs
Intensity Adjustments 3 Settings (std) up to 5 settings (optional)
Approach Angle 0° – 12°
Horizontal Output FAA Specification -10° – +10°
Horizontal Output ICAO Specification -8° – +8°
Vertical Divergence FAA Specification -4° – 0° Red, 0° – 4° White
Vertical Divergence ICAO Specification -3.5° – 0° Red, 0° – 3.5° White
Transition Better than 3 minutes of arc
LED Life Expectancy >60,000hrs
Lens Accuracy Better than 4mins of arc between the Red & White sectors @ 100m and better than 0.1mins of arc @ 1km
OPERATION
Function Manual or Radio Control (Optional)
Wireless Radio Receiver (Optional) 868 or 915Mhz MESH Network
ELECTRICAL CHARACTERISTICS
Operating Temperature -40°C – +60°C
Power Source Battery Packs, Solar and Generator
Nominal Voltage 12V DC or Custom
Circuit Protection Integrated
Charging Time of Battery Packs (Mains) 8hrs*
MECHANICAL
Body Aluminium
Casing Glass Reinforced Plastic (GRP)
Dimensions (HxWxD) 338 x 304 x 907mm
Weight 24.52Kg (54lb)
IP Rating IP65, IP67
COMPLIANCE
CE Compliant
Environmental MIL Std 810F Series
EMC MIL Std 461F Series
Aviation FAA-E-3007 AC150/5345-28G ICAO Annex 14
Metalite Aviation Lighting,
Fleets Point, Willis Way,
Poole, Dorset,
BH15 3SS, England
Telephone:+44 (0)1202 689099
Fax:+44 (0)1202 685670
Email: info@metaliteaviation.com
Web: www.metaliteaviation.com
Metalite is a trading division of
Aeronautical & General
Instruments Limited
www.agiltd.co.uk
Using the most advanced LED and optical technology available, Metalite Aviation Lighting’s new portable PAPI LED (Precision Approach Path Indicator) provides a world leading energy efficient and versatile portable PAPI system. Metalite’s unique light engine and optical system delivers unrivalled battery run times and highly efficient charging cycles, resulting in a reduced total cost of ownership and a low carbon footprint.
The compact design of the units ensures high portability to allow rapid deployment at either end of the runway. Metalite’s renowned outstanding build quality also ensures a low maintenance investment for your airside ground lighting deployments for many years to come. When used in conjunction with the CALKIT LED trailer, the PAPI LED is designed to meet the photometric aviation regulations listed in the compliance table below.
FEATURES & BENEFITS Unique Optical Design
Improved light efficiency and battery running time
Compact, Lightweight and Rugged Construction Ensuring versatility and portability
‘A’ PAPI (2 box) or Full PAPI (4 box) Systems Available in Manual and Secure Radio Control Options Provides system flexibility for various deployments
Powered from Portable PAPI Battery Packs or Alternative Sources (Generator, Solar, Wind or Fuel Cell etc.) Flexible power input options
Adjustable Intensity Settings 5 Intensity adjustments and custom settings to meet multiple ICAO and FAA requirements
High Capacity Replaceable Battery Pack as Standard Option to upgrade to ultra high capacity giving greatly extended running times per charge
Semi Permanent Fixings Aluminium fixing plates for secure fixing to the ground
Digital Inclinometer Allowing accurate setting of glideslope
SPECIFICATIONS
3845/0913
907mm
304m
m33
8mm
Portable Precision Approach Path Indicator LED
*Subject to environmental conditions
Patent Approved - Patent No. 2488598
Runway End Identifier Light LED
Radio controlled
Fully portable battery powered REIL
Rapid ‘drop in’ charging
Extensive run time
NEW state of the art LED light engine technology
Output compliant with FAA L-849
3845/0913
Metalite Aviation Lighting,
Fleets Point, Willis Way,
Poole, Dorset,
BH15 3SS, England
Telephone:+44 (0)1202 689099
Fax:+44 (0)1202 685670
Email: info@metaliteaviation.com
Web: www.metaliteaviation.com
Metalite is a trading division of
Aeronautical & General
Instruments Limited
www.agiltd.co.uk
*Subject to environmental conditions
Runway End Identifier Lights LEDMetalite Aviation Lighting’s LED Runway End Identifier Lights (REIL’s) consist of two strobe lights located at each side of the runway at the approach end. The main application of a REIL LED system is to identify the runway end or threshold of a visual or instrument non-precision runway.
Ergonomically constructed to endure all weather environments, the REIL LED is the most capable battery powered model of its type. Rapid ‘drop in’ charging and extensive run times cut down on management and maintenance costs, improving the total cost of ownership.
FEATURES & BENEFITS Unique Optical Design
Improved light efficiency and battery running time
Ergonomic and Functional Form Robust weatherproofing for endurance and efficient LED cooling
Drop in Charging Quick and easy handling when charging is required for re-deployment
MESH Network Technology Radio Control Remote operation from airfield or ATC tower
Semi Permanent Fixings Aluminium fixing plates for secure fixing to the ground
SPECIFICATIONS:LIGHT CHARACTERISTICS
Light Source Ultra High Intensity LEDs
Available LED Colours White
Light Intensities Compliant with FAA AC150/5345-51A L-849 Style A-F
Intensity Adjustments Up to 4 Settings
Endurance 18hrs* at maximum intensity
Flash Rate As per FAA AC150/5345-51A L-849 Style A-F
Horizontal Output +/- 15°
Vertical adjustment 0° - 15°
Vertical Divergence 0° - 10°
LED Life Expectancy >100,000hrs
OPERATION
Function Manual Control, Photocell Control, Radio Control
Wireless Radio Receiver (Optional) 868 or 915Mhz MESH Network
Setup and Diagnostics Integrated Test Facility, Battery Status Indication
ELECTRICAL CHARACTERISTICS
Operating Temperature -40°C to +60°C
Battery Type SLAB (Sealed Lead Acid Battery) air transport approved
Battery Capacity 28Ah
Nominal Voltage 12V
Circuit Protection Integrated
Charging Method Drop in Charging – Via Trailer or Standalone Charger
Charging Time (Mains) 8hrs*
CONSTRUCTION
Body High Strength Colour Impregnated Polycarbonate
Lens Borosilicate Glass
Dimensions (HxWxD) 250 (Fully extended excluding antenna) x 195 x 195mm
Weight 8kg (17.5lbs)
IP Rating IP65, IP67
COMPLIANCE
CE Compliant
Environmental MIL Std 810F Series
EMC MIL Std 461F Series
Aviation FAA AC150/5345-51A L-849 Style A-F
254m
m (I
nclu
ding
Ant
enna
)25
0mm
(Ful
ly Ex
tend
ed)
195mm
195m
m
Runway Threshold End Light LED
Radio controlled
Ergonomic and robust construction
Fully portable battery powered RTEL
Rapid ‘drop in’ charging
Extensive run time
NEW state of the art LED light engine technology
3845/0913
Metalite Aviation Lighting,
Fleets Point, Willis Way,
Poole, Dorset,
BH15 3SS, England
Telephone:+44 (0)1202 689099
Fax:+44 (0)1202 685670
Email: info@metaliteaviation.com
Web: www.metaliteaviation.com
Metalite is a trading division of
Aeronautical & General
Instruments Limited
www.agiltd.co.uk
*Subject to environmental conditions
Metalite’s Battery Powered Bi-directional Threshold/Stop End Light utilises the latest in LED light engine technology and is built to comply with FAA 150/5345-46D L-861E standards.
Metalite Aviation Lighting’s LED Runway Threshold End Lights (RTELs) are designed to be located at each end of the runway to identify the runway end or threshold of a visual or instrument non-precision runway.
Ergonomically constructed to endure all weather environments, the RTEL LED is the most capable battery powered model of its type. Rapid ‘drop in’ charging and extensive run times cut down on management and maintenance costs, lowering the total cost of ownership.
FEATURES & BENEFITS Unique Optical Design
Improved light efficiency and battery running time
Ergonomic and Functional Form Robust weatherproofing for endurance and efficient LED cooling
Drop in Charging Quick and easy handling when charging is required for re-deployment
MESH Network Technology Radio Control Remote operation from airfield or ATC tower
Semi Permanent Fixings Aluminium fixing plates for secure fixing to the ground
254m
m22
2mm
SPECIFICATIONS
195mm
195m
m
Runway Threshold/End Light LED
LIGHT CHARACTERISTICS
Light Source Ultra High Intensity LEDs
Available LED Colours Red/Green Split, Red or Green Unidirectional
Light Intensities in accordance with FAA AC150/5345-51A L-861E 90cd Green/10cd Red
Endurance Steady Light >300 hrs
Intensity Adjustments 3
Horizontal Output +/- 5°
Vertical Divergence 0° to 9°
Vertical Adjustment +/- 4°
LED Life Expectancy >100,000 hrs
OPERATION
Function Manual Control, Photocell Control, Radio Control
Wireless Radio Receiver (Optional) 868 or 915Mhz MESH Network
Setup and Diagnostics Integrated Test Facility, Battery Status Indication
ELECTRICAL CHARACTERISTICS
Operating Temperature -40°C to +60°C
Battery Type SLAB (Sealed Lead Acid Battery) air transport approved
Battery Capacity 14Ah
Nominal Voltage 12V
Circuit Protection Integrated
Charging Method Drop in Charging – Via Trailer or Standalone Charger
Charging Time (Mains) 8hrs*
MECHANICAL
Body High Strength Colour Impregnated Polycarbonate
Dimensions (HxWxD) 222 (excluding antenna) x 195 x 195mm
Weight 7Kg (15.5lbs)
IP Rating IP65, IP67
COMPLIANCE
CE MIL Std 461F Series
Environmental MIL Std 810F Series
Aviation FAA 150/5345-46D L-861E
top related