chapter 10 sctp client / server example. simple echo server using sctp protocol send line of text...

Chapter 10

SCTP Client / Server example

Simple echo server using SCTP protocol Send line of text from client to server Server sends the same line back to the

client Iterative server

Client

Client reads a single line of text from standard input

Text is send in [#]text format.# represents SCTP stream number where text

is sent

Server

Reads the text from the network Increases the SCTP stream number by

one (# in [#]text) Sends the message back to the client on

this new stream

Client

Reads the reply message and prints it to standard output

Stream number, sequence number and text string is printed

#include "unp.h"

int { int sock_fd,msg_flags; char readbuf[BUFFSIZE]; struct sockaddr_in servaddr, cliaddr; main(int argc, char **argv) struct sctp_sndrcvinfo sri; struct sctp_event_subscribe evnts; int stream_increment=1; socklen_t len; size_t rd_sz;

if (argc == 2) stream_increment = atoi(argv[1]); sock_fd = Socket(AF_INET, SOCK_SEQPACKET, IPPROTO_SCTP); bzero(&servaddr, sizeof(servaddr)); servaddr.sin_family = AF_INET; servaddr.sin_addr.s_addr = htonl(INADDR_ANY); servaddr.sin_port = htons(SERV_PORT);

Bind(sock_fd, (SA *) &servaddr, sizeof(servaddr));

bzero(&evnts, sizeof(evnts)); evnts.sctp_data_io_event = 1; Setsockopt(sock_fd, IPPROTO_SCTP, SCTP_EVENTS, &evnts, sizeof(evnts));

Listen(sock_fd, LISTENQ); for ( ; ; ) { len = sizeof(struct sockaddr_in); rd_sz = Sctp_recvmsg(sock_fd, readbuf, sizeof(readbuf), (SA *)&cliaddr, &len, &sri,&msg_flags); if(stream_increment) { sri.sinfo_stream++; if(sri.sinfo_stream >= sctp_get_no_strms(sock_fd,(SA *)&cliaddr, len)) sri.sinfo_stream = 0; } Sctp_sendmsg(sock_fd, readbuf, rd_sz, (SA *)&cliaddr, len, sri.sinfo_ppid, sri.sinfo_flags, sri.sinfo_stream, 0, 0); } }

Server: Stream increment

Stream increment option If command line option is passed to

program, program decides whether to increment stream number of incoming messages if (argc == 2) stream_increment = atoi(argv[1]);

Server: Create an SCTP socket

sock_fd = Socket(AF_INET, SOCK_SEQPACKET, IPPROTO_SCTP);

Server: Bind address

Bind any incoming address to certain server port. bzero(&servaddr, sizeof(servaddr)); servaddr.sin_family = AF_INET; servaddr.sin_addr.s_addr =

htonl(INADDR_ANY); servaddr.sin_port =

htons(SERV_PORT); Bind(sock_fd, (SA *) &servaddr,

sizeof(servaddr));

Server: Set up for notification

Server changes its notification subscription for the one-to-many SCTP socket.

This allows server to see the stream number where the message arrived. bzero(&evnts, sizeof(evnts)); evnts.sctp_data_io_event = 1; Setsockopt(sock_fd, IPPROTO_SCTP,

SCTP_EVENTS, &evnts, sizeof(evnts));

Server: Incoming associations

Server enables incoming associations so it can listen the server socket for incoming messages. Listen(sock_fd, LISTENQ);

After which server will enter the main loop

Server: Wait for messages

Initialize size of client socket address structure.

Block until message arrives. len = sizeof(struct sockaddr_in);rd_sz = Sctp_recvmsg(sock_fd, readbuf,

sizeof(readbuf), (SA *)&cliaddr, &len,

&sri,&msg_flags);

Server: Increment stream number

Check increment flag and increase stream stream number is flag is set.

If number is too large then number is set to 0. if(stream_increment) { sri.sinfo_stream++; if(sri.sinfo_stream >=

sctp_get_no_strms(sock_fd, (SA *)&cliaddr, len))

sri.sinfo_stream = 0; }

Server: Send message back

Sending back the message to the clientSctp_sendmsg(sock_fd, readbuf, rd_sz, (SA *)&cliaddr, len, sri.sinfo_ppid, sri.sinfo_flags, sri.sinfo_stream, 0, 0);

Server: Finish?

Program runs forever until it is shutdown with an external signal. for ( ; ; ) { … }

#include "unp.h"

int main(int argc, char **argv) { int sock_fd; struct sockaddr_in servaddr; struct sctp_event_subscribe evnts; int echo_to_all=0;

if(argc < 2) err_quit("Missing host argument - use '%s host [echo]'\n", argv[0]); if(argc > 2) { printf("Echoing messages to all streams\n"); echo_to_all = 1; } sock_fd = Socket(AF_INET, SOCK_SEQPACKET, IPPROTO_SCTP); bzero(&servaddr, sizeof(servaddr)); servaddr.sin_family = AF_INET; servaddr.sin_addr.s_addr = htonl(INADDR_ANY); servaddr.sin_port = htons(SERV_PORT); Inet_pton(AF_INET, argv[1], &servaddr.sin_addr);

bzero(&evnts, sizeof(evnts)); evnts.sctp_data_io_event = 1; Setsockopt(sock_fd,IPPROTO_SCTP, SCTP_EVENTS, &evnts, sizeof(evnts)); if(echo_to_all == 0) sctpstr_cli(stdin,sock_fd,(SA *)&servaddr,sizeof(servaddr)); else sctpstr_cli_echoall(stdin,sock_fd,(SA *)&servaddr,sizeof(servaddr)); Close(sock_fd); return(0); }

Client: Validate arguments

Arguments: host and echo flag. if(argc < 2) err_quit("Missing host argument - use '%s

host [echo]'\n", argv[0]); if(argc > 2) { printf("Echoing messages to all streams\

n"); echo_to_all = 1;}

Client: Create a socket

Create an SCTP socketsock_fd = Socket(AF_INET,

SOCK_SEQPACKET, IPPROTO_SCTP);

Client: Set up server address

Use given server address and well known port number to construct server address structure using Inet_pton(). bzero(&servaddr, sizeof(servaddr)); servaddr.sin_family = AF_INET; servaddr.sin_addr.s_addr = htonl(INADDR_ANY); servaddr.sin_port = htons(SERV_PORT); Inet_pton(AF_INET, argv[1], &servaddr.sin_addr);

Client: Set up for notifications

Explicitly setting notification subscription for one-to-many socket. bzero(&evnts, sizeof(evnts)); evnts.sctp_data_io_event = 1; Setsockopt(sock_fd,IPPROTO_SCTP,

SCTP_EVENTS, &evnts, sizeof(evnts));

Client: Echo processing

If flag is not set then sctpstrcli() is called. Else sctpstr_cli_echoall() is called.

if(echo_to_all == 0) sctpstr_cli(stdin,sock_fd,(SA

*)&servaddr,sizeof(servaddr)); else sctpstr_cli_echoall(stdin,sock_fd,(SA

*)&servaddr,sizeof(servaddr));

These functions are shown later.

Client: Finish

When all is done, client closes socket and returns zero. Close(sock_fd); return(0);

Client: sctpstr_cli() #include "unp.h"

void sctpstr_cli(FILE *fp, int sock_fd, struct sockaddr *to, socklen_t tolen) { struct sockaddr_in peeraddr; struct sctp_sndrcvinfo sri; char sendline[MAXLINE], recvline[MAXLINE]; socklen_t len; int out_sz,rd_sz; int msg_flags;

bzero(&sri,sizeof(sri)); while (fgets(sendline, MAXLINE, fp) != NULL) { if(sendline[0] != '[') { printf("Error, line must be of the form '[streamnum]text'\n"); continue; } sri.sinfo_stream = strtol(&sendline[1],NULL,0); out_sz = strlen(sendline); Sctp_sendmsg(sock_fd, sendline, out_sz, to, tolen, 0, 0, sri.sinfo_stream, 0, 0);

len = sizeof(peeraddr); rd_sz = Sctp_recvmsg(sock_fd, recvline, sizeof(recvline), (SA *)&peeraddr, &len, &sri,&msg_flags); printf("From str:%d seq:%d (assoc:0x%x):", sri.sinfo_stream,sri.sinfo_ssn, (u_int)sri.sinfo_assoc_id); printf("%.*s",rd_sz,recvline); } }

Client: Initialize

Initialize structure and enter loop. Block until user inputs line of text.

bzero(&sri,sizeof(sri)); while (fgets(sendline, MAXLINE, fp) !=

NULL) {

Client: Validate input

Validate given input from the user. if(sendline[0] != '[') { printf("Error, line must be of the form

'[streamnum]text'\n"); continue;}

Client: Stream number

Stream number is translated from the user input and put into the structure.sri.sinfo_stream = strtol(&sendline[1],NULL,0);

Client: Send message

Message is sent.out_sz = strlen(sendline);Sctp_sendmsg(sock_fd, sendline, out_sz, to, tolen, 0, 0, sri.sinfo_stream, 0, 0);

Client: Wait for response

Program blocks until message is received back from the server. len = sizeof(peeraddr);rd_sz = Sctp_recvmsg(sock_fd, recvline,

sizeof(recvline), (SA *)&peeraddr, &len, &sri,&msg_flags);

Client: Display message

Received message is displayed to standard output.printf("From str:%d seq:%d (assoc:0x%x):", sri.sinfo_stream,sri.sinfo_ssn, (u_int)sri.sinfo_assoc_id);printf("%.*s",rd_sz,recvline);

Client: Finish?

Program reads lines from user until it is terminated by an external signal.

Head-of-Line blocking

Head-of-Line blocking occurs when TCP segment is lost and latter segments arrive out of order.

All the subsequent segments are held until the lost segment is retransmitted.

This ensures data arrives to the application in the order it was sent.

SCTP blocking of streams

SCTP allows multiple streams over single connection.

Each stream can be transmitted independent of other streams.

Blocking of one stream for retransmission does not block other streams.

Client: sctpstr_cli_echoall() #include "unp.h"

#define SCTP_MAXLINE 800

void sctpstr_cli_echoall(FILE *fp, int sock_fd, struct sockaddr *to, socklen_t tolen) { struct sockaddr_in peeraddr; struct sctp_sndrcvinfo sri; char sendline[SCTP_MAXLINE], recvline[SCTP_MAXLINE]; socklen_t len; int rd_sz,i,strsz; int msg_flags;

bzero(sendline,sizeof(sendline)); bzero(&sri,sizeof(sri)); while (fgets(sendline, SCTP_MAXLINE - 9, fp) != NULL) { strsz = strlen(sendline); if(sendline[strsz-1] == '\n') { sendline[strsz-1] = '\0'; strsz--; } for(i=0;i<SERV_MAX_SCTP_STRM;i++) { snprintf(sendline + strsz, sizeof(sendline) - strsz, ".msg.%d", i); Sctp_sendmsg(sock_fd, sendline, sizeof(sendline), to, tolen, 0, 0, i, 0, 0); } for(i=0;i<SERV_MAX_SCTP_STRM;i++) { len = sizeof(peeraddr); rd_sz = Sctp_recvmsg(sock_fd, recvline, sizeof(recvline), (SA *)&peeraddr, &len, &sri,&msg_flags); printf("From str:%d seq:%d (assoc:0x%x):", sri.sinfo_stream,sri.sinfo_ssn, (u_int)sri.sinfo_assoc_id); printf("%.*s\n",rd_sz,recvline); } } }

Client: Initialize and read input

Initialize data structures. Enter loop and read user input.

bzero(sendline,sizeof(sendline)); bzero(&sri,sizeof(sri)); while (fgets(sendline, SCTP_MAXLINE -

9, fp) != NULL) {

Client: Process user input

Process given user input.strsz = strlen(sendline); if(sendline[strsz-1] == '\n') { sendline[strsz-1] = '\0'; strsz--;}

Client: Send message

Send message to each stream. Append .msg. and stream number to each

message for visual help of tracking messages. for(i=0;i<SERV_MAX_SCTP_STRM;i++) { snprintf(sendline + strsz, sizeof(sendline) - strsz, ".msg.%d", i); Sctp_sendmsg(sock_fd, sendline, sizeof(sendline), to, tolen, 0, 0, i, 0, 0); }

Client: Read, display and loop

Block until incoming data comes from streams. Display message and move to read next.

for(i=0;i<SERV_MAX_SCTP_STRM;i++) { len = sizeof(peeraddr); rd_sz = Sctp_recvmsg(sock_fd, recvline, sizeof(recvline), (SA *)&peeraddr, &len, &sri,&msg_flags); printf("From str:%d seq:%d (assoc:0x%x):", sri.sinfo_stream,sri.sinfo_ssn,

(u_int)sri.sinfo_assoc_id); printf("%.*s\n",rd_sz,recvline); }

After last message is read, loop back to user input.

Client: Modifications

Send two messages to each stream to see messages are being held for reordering. for(i=0;i<SERV_MAX_SCTP_STRM;i++) { snprintf(sendline + strsz, sizeof(sendline) - strsz, ".msg.%d 1",

i); Sctp_sendmsg(sock_fd, sendline, sizeof(sendline), to, tolen, 0, 0, i, 0, 0); snprintf(sendline + strsz, sizeof(sendline) - strsz, ".msg.%d 2",

i); Sctp_sendmsg(sock_fd, sendline, sizeof(sendline), to, tolen, 0, 0, i, 0, 0); } for(i=0;i<SERV_MAX_SCTP_STRM*2;i++) { len = sizeof(peeraddr);

Number of streams

FreeBSD KAME implementation: default 10 streams at start.

Change must be made on the socket before an association is made. if (argc == 2) stream_increment = atoi(argv[1]); sock_fd = Socket(AF_INET, SOCK_SEQPACKET,

IPPROTO_SCTP); bzero(&initm,sizeof(initm)); initm.sinit_num_ostreams = SERV_MORE_STRMS_SCTP; Setsockopt(sock_fd, IPPROTO_SCTP, SCTP_INITMSG, &initm, sizeof(initm));

Termination

Two possible methods for closing one-to-many association:Close after sending message (eof)Close immediately (abort)

Termination: eof

Server wishes to shutdown an association after sending message

Set flag MSG_EOF in the reply message structure.Sctp_sendmsg(sock_fd, readbuf, rd_sz, (SA *)&cliaddr, len, sri.sinfo_ppid, (sri.sinfo_flags | MSG_EOF),

sri.sinfo_stream, 0, 0); }

Termination: abort

Server wishes to shutdown an association immediately. Set flag MSG_ABORT in the reply message structure. Forces immediate termination with an ABORT chunk. Any data not transmitted will be discarded.

strcpy(byemsg,"goodbye"); Sctp_sendmsg(sock_fd, byemsg, strlen(byemsg), (SA *)&servaddr, sizeof(servaddr), 0, MSG_ABORT, 0, 0, 0); Close(sock_fd);

Even if association has been aborted, socket descriptor still needs to be freed with Close().

Summary

Simple SCTP client and iterative server Head-of-Line blocking problem Number of streams Shutdown and abort associations More on SCTP on chapter 23