chapter 01_overview of abap list viewer (alv)

March-2005 Overview of ABAP List Viewer (ALV) | 5.01 1

Objectives

The participants will be able to :– Describe the features and advantages of ALV.– Describe the different function modules that should be

used to properly produce a report output in ALV.– Create simple ALV reports.– Format the layout of the ALV reports.

ALV (ABAP List Viewer) ABAP List Viewer (ALV) is a simple, user

friendly and better looking reporting tool as compared to the usage of write statements in a conventional / interactive report.

SAP provides a set of ALV (ABAP LIST VIEWER) function modules, which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output.

Advantages of ALV

Looks better. User friendly

– Filtering / Sorting– Layout Change / Save– Summation, Download to excel, E-Mail– Data can be open for input / change etc.

Better Event handling Width of more than 256 characters possible Programming overhead of mentioning exact

positions in write statements not needed.

ALV Features

Column Heading

Row(s)

Selection

Sorting

Filtering

Download to Excel

Change Layout

ALV Features (Contd.)

Fields Open For

Display Graphics

ALV ProgrammingTwo Approaches

Conventional (Using SAP Standard Function Modules).

Object Oriented (Using SAP Standard Classes and Methods).

Common ALV functions

The commonly used ALV function modules are:– REUSE_ALV_VARIANT_DEFAULT_GET– REUSE_ALV_VARIANT_F4– REUSE_ALV_VARIANT_EXISTENCE– REUSE_ALV_EVENTS_GET– REUSE_ALV_COMMENTARY_WRITE– REUSE_ALV_FIELDCATALOG_MERGE– REUSE_ALV_POPUP_TO_SELECT – REUSE_ALV_LIST_DISPLAY– REUSE_ALV_GRID_DISPLAY

Major Steps to construct an ALV Report

Step 1 : Data Declaration.

Step 2 : Selecting the Variant for initial list display (Default Variant). – Optional : Used only if report layout is maintained through variant management.

Step 3 : Defining output characteristics: preparing display Field-catalog.

Step 4 : Build a table for Events, which are used for firing both user commands and the system dependent events i.e. top of page, end of page etc.

– Optional : Required if the report has custom buttons, interactive properties etc or you need to display something at the top of page or end of page sections.

Step 5 : Build the Layout for report display.

Continued to next slide…

Major Steps to construct an ALV Report (Contd.)Step 6 : Get the Selection Screen information in the report

output. Optional : Required only if you need to display selection screen

values in the report output.

Step 7 : Specify the Sorting and/or Subtotaling of the basic list. Optional : Required when sorting and/or subtotaling is required

for some columns in the report output.

Step 8 : Finally display report output, using the following ALV functions modules: 1. REUSE_ALV_FIELDCATALOG_MERGE 2. REUSE_ALV_LIST_DISPLAY Or REUSE_ALV_GRID_DISPLAY

Step 1: Data Declaration

SAP Standard type pools: SLIS , KKBLO .

SAP Standard tables types taken from the type pools are: SLIS_LAYOUT_ALV ,SLIS_T_FIELDCAT_ALV,SLIS_T_LISTHEADER,SLIS_T_EVENT,SLIS_SELFIELD.

Internal tables to be used in the program declared based on the above table types:DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV,

I_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV, I_HEADING TYPE SLIS_T_LISTHEADER, I_EVENTS TYPE SLIS_T_EVENT. TYPES: KKBLO_SELFIELD TYPE SLIS_SELFIELD.

CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'

* EXPORTING I_SAVE = Variant save condition

( A=all, U = user-specific ) CHANGING cs_variant = Internal table containing

the program name ( and the default variant: Optional )

* EXCEPTIONS* WRONG_INPUT = 1* NOT_FOUND = 2* PROGRAM_ERROR = 3* OTHERS = 4. .

Step 2: Selecting the Variant for initial list display (Default Variant).

ALV Function Modules : REUSE_ALV_VARIANT_F4 CALL FUNCTION 'REUSE_ALV_VARIANT_F4' EXPORTING is_variant =* I_TABNAME_HEADER =* I_TABNAME_ITEM =* IT_DEFAULT_FIELDCAT =* I_SAVE = ' '* I_DISPLAY_VIA_GRID = ' '* IMPORTING* E_EXIT =* ES_VARIANT =* EXCEPTIONS* NOT_FOUND = 1* PROGRAM_ERROR = 2* OTHERS = 3.

CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'

* EXPORTING* I_SAVE = ' ' CHANGING cs_variant =* EXCEPTIONS* WRONG_INPUT = 1* NOT_FOUND = 2* PROGRAM_ERROR = 3* OTHERS = 4.

ALV Function Modules : REUSE_ALV_VARIANT_EXISTENCE

Step 3: Defining output characteristics: preparing display Field-catalogA field catalog is prepared using the internal

table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV.

The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.

Specifying attributes for fields in Field Catalog All the values entered in the catalog is specific to the

particular field whose name is entered in the field FIELDNAME of the field catalog structure. The name of the table is also entered in the corresponding Fieldname TABNAME of the structure.

Some important attributes that can be defined for a field are:Col_pos (column position)Fieldname (field name)Tabname (internal output table)Ref_fieldname (reference field name)Ref_tabname (reference table/structure field nameLink to currency unit

Cfieldname (currency unit field name) Ctabname (internal currency unit field output table)

Specifying attributes for fields in Field Catalog (Contd.)

Link to measurement unitQfieldname (measurement unit field name)Qtabname (internal measurement unit field

output table)Outputlen (column width)Key (key column)No_out (field in field list)Emphasize (highlight columns in color)Hotspot (column as hotspot)

Specifying attributes for fields in Field Catalog (Contd.)

Fix_column (fix column)Do_sum (sum over column)No_sum (sums forbidden)IconJust (justification)Lzero (leading zeros)No_sign (no +/- sign)Edit_mask (field formatting)The following parameters are used for customizing

the texts in the heading of the output of the columns. Seltext_l (long field label) Seltext_m (medium field label) Seltext_s (short field label)

Step 4: Build a table for Events*Internal Table needed for eventsDATA: i_events TYPE slis_t_event. *Calling Function module to populate table with possible events CALL FUNCTION 'REUSE_ALV_EVENTS_GET' EXPORTING i_list_type = 0 IMPORTING et_events = i_events EXCEPTIONS list_type_wrong = 1 OTHERS = 2.

SORT i_events BY name.

Continued to next page…March-2005 Overview of ABAP List Viewer (ALV) | 5.01 19

Step 4: Build a table for Events (Contd.) SORT i_events BY name.

*Reading events table READ TABLE i_events WITH KEY name = 'TOP_OF_PAGE'

BINARY SEARCH.

IF sy-subrc IS INITIAL.*Assign event name to variable MOVE 'TOP_OF_PAGE' TO i_events-form. MODIFY i_events INDEX sy-tabix. ENDIF.

Step 5: Build the Layout for report displayA layout is build for the report output description

USING the internal table for Layout (I_LAYOUT).The layout parameters are described under the

following heads:Display optionsExceptionsTotalsInteraction Detail screenColorOther

Preparing the Layout (Contd.)

DATA: st_layout TYPE slis_layout_alv, " ALV Layout

st_layout-box_fieldname = 'BOX'. " Box Fieldname st_layout-get_selinfos = 'X'. " Get info of select records st_layout-colwidth_optimize = 'X'. " To optimize coloumn width st_layout-no_keyfix = 'X'. " To scroll Key fields

Step 6 : Get the Selection Screen information in the report output.For this you need to set the parameter

LAYOUT-GET_SELINFOS of the Layout structure

If the calling program is a report with an ABAP/4 selection screen, setting this parameter makes ALV read the selection screen again. If the selections are read successfully, a pushbutton, via which the user can call a popup which lists the report selections in a simple form, becomes active on the results list output by ALV.

Step 7 : Specify the Sorting and/or Subtotaling of the basic list.The Table IT_SORT is populated with the sort criteria

for the different fields.The caller specifies the Sorting and/or Subtotaling of

the basic list in the internal table IT_SORT.This internal table has the following fields:

spos : Sort sequencefieldname : Internal output table field nametabname : Only relevant for hierarchical-sequential lists.

Name of the internal output table.up : 'X' = sort in ascending orderdown : 'X' = sort in descending ordersubtot : 'X' = subtotal at group value changegroup : '* ' = new page at group value change ,'UL' =

underline at group value change

Step 8 : Display the Report outputFinally display report output, using the

following ALV functions modules:

REUSE_ALV_FIELDCATALOG_MERGE

REUSE_ALV_LIST_DISPLAY

REUSE_ALV_GRID_DISPLAY

Display ALV ListCALL FUNCTION 'REUSE_ALV_LIST_DISPLAY' EXPORTING I_CALLBACK_PROGRAM = WS_REPNAME I_STRUCTURE_NAME = Internal

output table field name IS_LAYOUT = I_LAYOUT IT_FIELDCAT = I_FIELDTAB I_DEFAULT = 'A' I_SAVE = 'A' IS_VARIANT = 'X' IT_EVENTS = I_EVENTS[] IT_SORT = I_SORT IS_SEL_HIDE = I_SELINFO TABLES T_OUTTAB = Internal

output table field name.

ALV Function Modules : Important Parameters IMPORTING

I_CALLBACK_PROGRAM

I_CALLBACK_USER_COMMAND

I_STRUCTURE_NAME IS_LAYOUT IT_FIELDCAT IT_EXCLUDING IT_SPECIAL_GROUPS IT_SORT IT_FILTER IS_SEL_HIDE I_DEFAULT I_SAVE IS_VARIANT IS_PRINT

EXPORTING

E_EXIT_CAUSED_BY_CALLER

ES_EXIT_CAUSED_BY_USER

TABLES

T_OUTTAB

REPORT Y_DEMO_ALV_LIST NO STANDARD PAGE HEADING.

* Data to be displayedDATA: I_SFLIGHT TYPE TABLE OF SFLIGHT. * Selection SELECT * FROM SFLIGHT INTO TABLE

I_SFLIGHT. * Call ABAP List Viewer (ALV) CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY' EXPORTING I_STRUCTURE_NAME = 'SFLIGHT' TABLES T_OUTTAB = I_SFLIGHT.

Simple Program Walkthrough : REUSE_ALV_LIST_DISPLAY

Result: REUSE_ALV_LIST_DISPLAY

DemonstrationCreation of a simple ALV list report using the

function module REUSE_ALV_LIST_DISPLAY.

PracticeCreation of a simple ALV list report using the

function module REUSE_ALV_LIST_DISPLAY.

REPORT Y_DEMO_ALV_GRID .

* Data to be displayedDATA: I_SFLIGHT TYPE TABLE OF SFLIGHT.

* Selection SELECT * FROM SFLIGHT INTO TABLE

I_SFLIGHT.

* Call ABAP List Viewer (ALV) CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING I_STRUCTURE_NAME = 'SFLIGHT' TABLES T_OUTTAB = I_SFLIGHT.

Simple Program Walkthrough: REUSE_ALV_GRID_DISPLAY

Result : REUSE_ALV_GRID_DISPLAY

DemonstrationCreate a simple ALV grid report using the

function module REUSE_ALV_GRID_DISPLAY

PracticeCreate a simple ALV grid report using the

function module REUSE_ALV_GRID_DISPLAY

In the PARAMETERS give I_GRID_TITLE = 'Flight Information‘ and Call the function 'REUSE_ALV_GRID_DISPLAY'

Simple Program Walkthrough:Including Title in the Report for GRID DISPLAY

Simple Program Walkthrough: Using FIELDCAT to Position Columns

DATA: i_fcat TYPE slis_t_fieldcat_alv, wa_fcat TYPE slis_fieldcat_alv.

wa_fcat-tabname = 'I_SFLIGHT'.wa_fcat-col_pos = '1'.wa_fcat-fieldname = 'CARRID'.append wa_fcat to i_fcat.

wa_fcat-col_pos = '2'.wa_fcat-fieldname = 'FLDATE'.append wa_fcat to i_fcat.

wa_fcat-col_pos = '3'.wa_fcat-fieldname = 'CONNID'.append wa_fcat to i_fcat.

wa_fcat-col_pos = '4'.wa_fcat-fieldname = 'PRICE'.APPEND wa_fcat TO i_fcat.

wa_fcat-fieldname = 'CURRENCY'.wa_fcat-no_out = 'X'.APPEND wa_fcat TO i_fcat.

wa_fcat-fieldname = 'PLANETYPE'.wa_fcat-no_out = 'X'.APPEND wa_fcat TO i_fcat.

In the function module pass :

IT_FIELDCAT = i_fcat

Result :

CARRID

CONNID

FLDATE

DemonstrationCreating a simple ALV report by populating

the field catalog table, using the function module REUSE_ALV_GRID_DISPLAY.

PracticeCreating a simple ALV report by populating

the field catalog table, using the function module REUSE_ALV_GRID_DISPLAY.

1.Go to Transaction SE41(Menu Painter).2.Give the Program as SAPLKKBL and the Status as STANDARD.3.Now copy the STANDARD status of the Program SAPLKKBL to a

customized status ‘YALVGRID’ for Program Y_DEMO_ALV_GRID.4.Go to the Program Y_DEMO_ALV_GRID and create a Subroutine SET_PF_STATUS using rt_extab TYPE SLIS_T_EXTAB for setting

the standard ALV PF-STATUS to the customized PF-STATUS ‘YALVGRID’.

FORM set_pf_status USING p_rt_extab TYPE slis_t_extab.

SET PF-STATUS 'YALVGRID'.

ENDFORM. " set_pf_status

Simple Program Walkthrough: Changing the Default Status Bar of ALV

Simple Program Walkthrough: Changing the Default Status Bar of ALV (Contd.)

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING I_STRUCTURE_NAME = 'SFLIGHT' I_CALLBACK_PROGRAM =

'Y_DEMO_ALV_GRID' I_CALLBACK_PF_STATUS_SET =

'SET_PF_STATUS' IT_FIELDCAT = i_fcat I_GRID_TITLE = 'Flight Information' TABLES T_OUTTAB = I_SFLIGHT.

Call the function module ‘REUSE_ALV_GRID_DISPLAY’ as:

Result : Changing the Default Status Bar of ALV (Contd.)

Custom Button for adding extra

functionality

DemonstrationCreating a simple ALV report by changing

the default status bar, using the function module REUSE_ALV_GRID_DISPLAY.

PracticeCreating a simple ALV report by changing

the default status bar, using the function module REUSE_ALV_GRID_DISPLAY.

Simple Program Walkthrough : Adding Function Codes

FORM user_command USING v_ucomm LIKE sy-ucomm v_selfield TYPE slis_selfield. CASE v_ucomm. WHEN 'BACK'.

* When Back button is pressed is pressed leave list LEAVE LIST-PROCESSING. ENDCASE.ENDFORM.

Create a Subroutine user_command USING v_ucomm LIKE sy-ucomm v_selfield TYPE slis_selfield.

During the Call to the function module ‘REUSE_ALV_GRID_DISPLAY’, add another parameter I_CALLBACK_USER_COMMAND = USER_COMMAND‘.

Simple Program Walkthrough : Make some fields Editable

Make the field ‘PRICE’ editable by updating the field catalog.

wa_fcat-col_pos = '4'.wa_fcat-fieldname = 'PRICE'.wa_fcat-edit = 'X'.

append wa_fcat to i_fcat.clear wa_fcat.

To make PRICE field editable

Result : Field Editable

DemonstrationCreating a simple ALV report by making one

of its column editable, using the function module REUSE_ALV_GRID_DISPLAY.

PracticeCreating a simple ALV report by making one

of its column editable, using the function module REUSE_ALV_GRID_DISPLAY.

SummaryABAP List Viewer (ALV) is a simple, user friendly and

better looking reporting tool as compared to the usage of write statements in a conventional / interactive report.

ALV report has several inbuilt User Friendly properties as:Filtering / SortingLayout Change / SaveSummation, Download to excel, E-MailData can be open for input / change etc.

The main ALV Function Modules are:REUSE_ALV_LIST_DISPLAYREUSE_ALV_GRID_DISPLAYREUSE_ALV_FIELDCATALOG_MERGE

Status STANDARD of the main program SAPLKKBL is copied and then changed to create a new customized GUI status for any ALV report.

QuestionsWhat is ALV ?What are the main differences between an ALV report and

a classical report?What are the main function modules used to create an ALV

List?What are the main differences between ALV list and ALV

grid?What are the different ways to populate the FIELD

CATALOG table?How can we change the default status bar of an ALV List?How can we handle custom function code in ALV ?How can we make a certain columns of an ALV list

editable?

chapter 01_overview of abap list viewer (alv)

Documents

abap alv programming

object oriented approach to alv lists in abap

web dynpro abap: changing alv contents and saving in...

an easy reference for alv grid control - abap and hana...

alv tabla con gráficos de negocios web dynpro abap

web dynpro abap: alv and table in popup window · sap ecc...

web dynpro abap: toolbar in alv · pdf fileweb dynpro abap:...

alv grid control in abap objects

sap abap, webdynpro alv comp

web dynpro abap: changing alv contents and saving … ·...

abap - manual alv (ingles)

web dynpro abap for practitioners · chapter 13 covers the...

alv easy tutorial - abap development - scn wiki.pdf

web dynpro abap%3a changing alv contents and saving in...

sap cm teil 3 - id.uzh.ch · pdf...

chapter 01_overview of abap dictionary

web dynpro abap – using ui elements in alv component cells

abap advanced list control break report alv report

advanced alv with abap objects

sap abap alv grid explained with real example