cat 986h wheel loader specifications
Post on 01-Apr-2016
280 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
EngineEngine Model Cat C15 ACERTGross Power SAE J1995 335 kW 449 hpNet Power ISO 9249 305 kW 409 hpBucketsBucket Capacities 5.3-7.6 m3 7-10 yd3
Operating SpecificationsRated Payload Standard (Quarry Face) 10 tonnes 11 tonsRated Payload Standard (Loose Material) 12 tonnes 13 tonsOperating Weight Standard 42 225 kg 93,090 lbRated Payload High Lift (Quarry Face) 9.5 tonnes 10.5 tonsRated Payload High Lift (Loose Material) 10 tonnes 11 tonsOperating Weight High Lift 42 943 kg 94,677 lb
986HWheel Loader
-
2Lower your cost per ton with built-in durability.
ContentsStructures.............................................................4
Power Train ..........................................................6
Hydraulics ............................................................8
Operator Station ................................................10
Technology Solutions .......................................12
Safety ..................................................................13
Serviceability .....................................................14
Customer Support .............................................14
Sustainability .....................................................15
System Match Effi ciency .................................16
Bucket Ground Engaging Tools ......................17
Specifi cations ....................................................18
Standard Equipment .........................................26
Optional Equipment...........................................27
Mandatory Attachments ..................................27
-
3Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplifi ed serviceability, our machines allow you to move more material effi ciently and safely at a lower cost per ton.
The new 986H builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
-
4Lift ArmsYour key to maximum uptime and productivity is our fi eld-proven lift arms. Excellent visibility to the bucket edges and work area through
a Z-bar design. High load stresses are absorbed by the solid steel lift arms. Enhance strength in key pin areas through the use of one piece castings.
StructuresBest built for the toughest conditions.
-
5Front LinkageTo ensure long life and reliability, the linkage pin joints feature a greased pin design with optional auto lube system.
Robust StructuresYour bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions. Full box-section rear frame resists torsional shock and twisting forces. Heavy-duty steering cylinder mounts effi ciently transmit loads intothe frame. Cast axle pivot mounting areas better disperse stress loads for increased
structural integrity.
-
6Cat Planetary Powershift TransmissionBuilding your success begins with a best-in-class transmission designed specifi cally for mining applications. Consistent, smooth shifting and effi ciency through
integrated electroniccontrols. Heat treated gears and shafts extend component
life and maximize reliability. Four forward and three reverse speeds to match
your application.
Cat C15 Acert EngineDurability and effi ciency at the heart of your 986H comes from the Cat C15 Acert engine. Optimum performance is built in to this 6 cylinder turbocharged engine. Mechanically Actuated Electronic Unit Injection (MEUI)
controls injection pressure over the entire engine operating range. This gives the C15 complete control overinjection timing, duration and pressure.
Extended engine life through Cat components with provenreliability.
The Advanced Diesel Engine Management (ADEM) A4 electronic control module manages fuel delivery to optimize performance and provide quick engine response.
-
7Transmission Neutralizer Pedal Extends service brake life by
neutralizing transmission as service brakes are applied.
Allows full power to implement system while the machine is stationary during truck loading.
2 Set Point for Neutralization Start of service brake pressure modulation
3 Full Pedal Travel Maximum brake pressure
Power TrainMove material more effi ciently with improved power and control.
-
8Load Sense HydraulicsIncrease effi ciency through our Load Sense Hydraulic System. Load sense hydraulics maximize performance by directing hydraulic fl uid fl ow through implement and steering system only when needed. Lowered fuel consumption. Consistent performance and effi ciency
with lower systemheat.
HydraulicsProductivity enabling you to move more and make more.
-
9Simple, Intuitive Operator InterfaceOperators will be productive right away with our easy-to-use operator interface. Comfortable soft detent implement controls. Low effort, responsive steering wheel. Easy-to-use, in-cab programmable lift kickout
allows the operator to pre set linkage positions andachieve faster cycle times.
3rd Valve Hydraulic Control Provides versatility through the ability to control
aspecialized attachment.
Filtration SystemBenefi t from extended performance and reliability ofyour hydraulic system with our advanced fi ltrationsystem. Implement pump case drain fi lters. Implement system fi lter. Steering pump case drain fi lters. Power train oil fi lter.
-
Your operators can work more effi ciently and stay comfortable with our customer-inspired cab features.
Entry and ExitEnter and exit the cab easily and safely with these newly designed, ergonomic features. Punch stamped tread plates provide excellent footing. Spacious cab provides ample space for comfortable
entry and exit. Angled access ladder.
Cat Comfort Series III SeatEnhance comfort and reduce operator fatigue with CatComfort Series III seat. High back design and extra thick, contoured cushions. Air suspension system. Easy-to-reach seat levers and controls for six way
adjustments. Seat-mounted implement pod that moves with
theseat. Optional heated seat for cold weather applications.
10
-
EnvironmentYour operators productivity is enhanced with ourclean, comfortable cab environment. Maintain desired cab temperature with
automatic temperature controls. Pressurized cab with fi ltered air.
11
Operator StationBest-in-Class operator comfort and ergonomics.
-
12
Technology SolutionsGreater productivity through Integrated Electronic Systems.
Optional Rear View CameraCat Work Area Vision System (WAVS) enhances visibility around the job site through the use of a rear view camera. Acamera mounted at the rear of the machine provides the input to the monitor display mounted in the front right corner of the cab, within the operators fi eld of vision.
Cat Monitoring SystemThis includes a digital readout for gear selection and ground speed as well as gauge displays for: Fuel tank level. Engine and steering oil pressures. Engine coolant temperature. Torque converter and hydraulic
oiltemperature. Engine inlet air temperature.
-
13
We are constantly improving our products in an effort to provide asafe work environment for the operator andthose who work onyour job site.
Machine Access Walkways with non-skid surfaces are designed into the
service areas. Windshield cleaning platforms provide safe and
convenient access for the operator. Maintain three points of contact at all times through
ground levelor platform accessible service areas. Angled access ladder and strategically placed grab
handles provide safe access and egress for the operator.
Operator Environment Low interior sound levels. Cab mounted LED warning beacon. Optional heated seat. Optional HID lights provide excellent
workspace visibility. Full Roll Over Protection System (ROPS)
integrated into cab design.
SafetyMaking your safety our priority.
-
14
ServiceabilityEnabling high uptime by reducing your service time.
Customer SupportYour Cat dealers know how to keep your mining
machines productive.
We can help you succeed by ensuring your 986H has design features to reduce your downtime. Longer service intervals on fl uids and fi lters. Safe and convenient service with ground level
orplatform access and grouped service points. Centralized, ground level grease points for
injecting grease into linkage pin joints. Centralized remote pressure taps for power train
components. Ground electrical service center with emergency
engine shutdown switch, battery disconnect switch and circuit breakers.
Legendary Cat Dealer SupportA valued partner, your Cat dealer is available whenever you need them. Preventive maintenance programs and guaranteed
maintenance contracts. Best-in-class parts availability. Improve your effi ciency with operator training. Genuine Cat Remanufactured parts.
-
15
Protecting the EnvironmentEnvironmental responsibility is designed and built into our 986Hs features. Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling. Reduce waste to the environment with our maintenance free or extended maintenance batteries. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certifi ed Rebuild
programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefi ting the environment.
Caterpillar offers retrofi t packages to bring new features to older machines, maximizing your resource. And, when you go through theCat Certifi ed Rebuild program, these retrofi t kits are part of the rebuild process.
SustainabilityStewards of the environment.
-
16
System Match Effi ciencyEffi cient loading/hauling system starts with a perfect match.
735B 740B 770G 772G 773E/773GStandard Lift 3 4 4
High Lift 5 6
Effi cient CombinationFor full truck payloads with minimum loading time, an effi cient loading/hauling system starts with a perfect match. Cat wheel loaders are matched with Cat articulated and off-highway trucks to maximize volume of material moved at the lowest operating cost per ton.
The 986H equipped with the standard linkage is a perfect four pass match for the 770G (38.6 tonnes/42.6 tons). The 986H equipped with a high lift linkage is capable ofloading a 772G (47.7 tonnes/52 tons) in 5 passes and a 773E or 773G (56 tonnes/61.7 tons) in 6 passes.
-
Performance Series BucketsPerformance Series Buckets feature an optimized profi le maximizing material retention and minimizing dig time, translating into signifi cant productivity and fuel effi ciency improvements. All 986H buckets are manufactured with the Performance Series design.
Rock BucketApplications: Face loading tightly compacted pit materials.
General Purpose BucketApplications: Loading loose, stockpiled material.
Quick CouplerThe optional quick coupler allows the operator to quickly switch between multiple work tools, making the 986H highly versatile.
GET OptionsMultiple GET options are available to customize your 986H to your application, such as: Sidebar protectors. General duty and penetration tips. Standard and half arrow segments.
Enhance the productivity of your loader and protect your investment in buckets with our Ground Engaging Tools (GET). Your knowledgeable Cat dealer will work with you to understand your application and needs for the GET that is best for you. For a full list of Cat GET please visit http://www.cat.com/get.
Bucket Ground Engaging ToolsProtect your investment.
17
-
18
986H Wheel Loader Specifi cations
Engine
Engine Model Cat C15 ACERT
Emissions Tier 2, Tier 3 equivalent
Rated Speed 1,800 rpm
SAE J1995 at Rated Speed 335 kW 449 hp
ISO 14396 at Rated Speed 329 kW 441 hp
EEC 80/1269 305 kW 409 hp
ISO 9249 at Rated Speed (assumes standard ambient fan)
305 kW 409 hp
SAE 1349 at Rated Speed (assumes standard ambient fan)
305 kW 409 hp
Bore 137 mm 5.4 in
Stroke 171.5 mm 6.75 in
Displacement 15.2 L 927 in3
Peak Torque @ 1,200 rpm 2320 Nm 1,711 lb ft
Torque Rise 37%
Operating Specifi cations
Operating Weight 42 225 kg 93,090 lb
Rated Payload Standard (QuarryFace)
10 tonnes 11 tons
Rated Payload Standard (LooseMaterial)
12 tonnes 13 tons
Rated Payload High Lift (QuarryFace)
9.5 tonnes 10.5 tons
Rated Payload High Lift (LooseMaterial)
10 tonnes 11 tons
Bucket Capacity Range 5.3-7.6 m3 7-10 yd3
Cat Truck Match Standard 770
Cat Truck Match High Lift 772
Transmission
Transmission Type Cat planetary powershift
Forward 1 7.3 km/h 5 mph
Forward 2 12.2 km/h 8 mph
Direct Drive Forward 2 12.7 km/h 8 mph
Direct Drive Forward 3 22 km/h 14 mph
Direct Drive Forward 4 39 km/h 24 mph
Reverse 1 7.6 km/h 5 mph
Reverse 2 13.6 km/h 8 mph
Direct Drive Reverse 2 14.1 km/h 9 mph
Direct Drive Reverse 3 25 km/h 16 mph
Travel speeds based on R35/65-33 tires.
Hydraulic System Lift/Tilt
Lift/Tilt System Circuit Load Sense
Lift/Tilt System Pumps 2 110 cc variable displacement
Maximum Flow at 2,165 rpm 470 L/min 123 gal/min
Relief Valve Setting Lift/Tilt 27 900 kPa 4,050 psi
Lift Cylinder Bore 190 mm 7.5 in
Lift Cylinder Stroke 1138 mm 45 in
Tilt Cylinder Bore 170 mm 6.7 in
Tilt Cylinder Stroke 722 mm 28.4 in
-
986H Wheel Loader Specifications
Hydraulic Cycle Time Axles
Rackback 4.5 Seconds Front Fixed
Raise 8.5 Seconds Rear Trunnion
Dump 3 Seconds Oscillation Angle 12.5
Lower
Lower Float Down
4.9 Seconds
4.3 Seconds Brakes Total Hydraulic Cycle Time
Service Refi ll Capacities
Fuel Tank
Cooling Systems
Crankcase
Transmission
Axle Oil
Differentials and Final Drives Front
Differentials and Final Drives Rear
15.8 Seconds
600 L 159 gal
90 L 24 gal
34 L 9 gal
75 L 20 gal
356 L 94 gal
186 L 49 gal
170 L 45 gal
Brakes
Hydraulic System Steering
Steering System Circuit
Steering System Pump
Maximum Flow @ 2,284 rpm
Steering Cutoff Pressure
Total Steering Angle
SAE J1473 OCT90, ISO3450:1992
Load Sense
Piston, variable displacement
200 L/min 52 gal/min
27 600 kPa 4,000 psi
70 degrees
Hydraulic System Factory Fill 330 L 87 gal
Hydraulic System (tank only) 125 L 33 gal
Buckets
Bucket Capacities 5.3-7.6 m3 7-10 yd3
19
-
986H Wheel Loader Specifi cations
20
DimensionsAll dimensions are approximate.
Standard Lift Linkage High Lift Linkage1 Ground to Top of ROPS 4110 mm 13.5 ft 4110 mm 13.5 ft2 Ground to Top of Exhaust Stacks 3940 mm 12.9 ft 3940 mm 12.9 ft3 Ground to Top of Hood 2991 mm 9.8 ft 2991 mm 9.8 ft4 Ground to Center of Rear Axle 978 mm 3.2 ft 978 mm 3.2 ft5 Ground to Fuel Tank Clearance 691 mm 2.3 ft 691 mm 2.3 ft6 Ground to Lower Hitch Clearance 459 mm 1.5 ft 459 mm 1.5 ft7 Reach at Maximum Lift 2022 mm 6.6 ft 1904 mm 6.2 ft8 Clearance at Maximum Lift 3234 mm 10.6 ft 3738 mm 12.3 ft9 B-Pin Height at Maximum Lift 4912 mm 16.1 ft 5371 mm 17.6 ft
10 Maximum Overall Height, Bucket Raised 6671 mm 21.9 ft 7067 mm 23.2 ft11 Rear Axle Center Line to Bumper 3132 mm 10.3 ft 3132 mm 10.3 ft12 Wheel Base 3810 mm 12.5 ft 3810 mm 12.5 ft13 Maximum Overall Length 10 907 mm 35.8 ft 11 290 mm 37.0 ft14 Front Axle Centerline to Bucket Tip 3987 mm 13.1 ft 4370 mm 14.3 ft
-
Bucket Capacity/Material Density Selection Guide
Rock Buckets Standard Lift 10 tonnes (11 tons) Rated PayloadMaterial Density Bucket Volume
kg/m3 lb/yd3 tonnes/m3 tons/yd3 m3 yd3
1632-1795 2,750-3,025 1.63-1.80 1.38-1.51 6.1 8.0
1740-1914 2,933-3,227 1.74-1.91 1.46-1.61 5.7 7.5
1865-2051 3,143-3,457 1.86-2.05 1.57-1.73 5.4 7.0
Rock Buckets High Lift 9.5 tonnes (10.5 tons) Rated PayloadMaterial Density Bucket Volume
kg/m3 lb/yd3 tonnes/m3 tons/yd3 m3 yd3
1553-1708 2,618-2,879 1.55-1.71 1.31-1.44 6.1 8.0
1659-1822 2,796-3,072 1.66-1.82 1.39-1.54 5.7 7.5
1775-1952 2,992-3,291 1.78-1.95 1.50-1.65 5.4 7.0
General Purpose Buckets Standard Lift 12 tonnes (13 tons) Rated PayloadMaterial Density Bucket Volume
kg/m3 lb/yd3 tonnes/m3 tons/yd3 m3 yd3
1579-1737 2,600-2,860 1.57-1.73 1.30-1.43 7.6 10.0
1739-1913 2,889-3,177 1.73-1.91 1.44-1.59 6.9 9.0
1967-2164 3,250-3,575 1.96-2.16 1.63-1.79 6.1 8.0
General Purpose Buckets High Lift 10 tonnes (11 tons) Rated PayloadMaterial Density Bucket Volume
kg/m3 lb/yd3 tonnes/m3 tons/yd3 m3 yd3
1316-1447 2,200-2,420 1.31-1.44 1.10-1.21 7.6 10.0
1449-1594 2,444-2,689 1.45-1.59 1.22-1.34 6.9 9.0
1639-1803 2,750-3,025 1.63-1.80 1.38-1.51 6.1 8.0
Note: Rated Payload is the material weight in the bucket that the loader is designed to carry, excluding the weight of the bucket, GET, andwear material.Rated Payloads are published at 100%, even though Caterpillar does allow 110%. These values are given in terms of mass. There is no consideration to loose density weights of various materials since they are so diverse.
21
986H Wheel Loader Specifi cations
-
986H Wheel Loader Specifi cations
22
Operating Specifications Standard LiftTires: 35/65-33 Part Number: 359-4566
Bucket Type Rock HD RockGround Engaging Tools Teeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade SpadeBucket Part No. 369-2020 369-2030 369-2040 436-8300Struck Capacity m3 4.4 4.8 5.1 4.4
yd3 5.8 6.2 6.7 5.8
Heaped Capacity (rated) m3 5.4 5.7 6.1 5.4yd3 7.0 7.5 8.0 7.0
Width mm 3772 3772 3772 3840ft 12.4 12.4 12.4 12.6
Dump Clearance at Full Lift and 45 Discharge (edge) mm 3420 3374 3328 3280ft 11.2 11.1 10.9 10.8
Dump Clearance at Full Lift and 45 Discharge (with teeth) mm 3280 3234 3188 3051ft 10.8 10.6 10.5 10.0
Reach at Lift and 45 Discharge (edge) mm 1858 1904 1950 1774ft 6.1 6.2 6.4 5.8
Reach at Lift and 45 Discharge (with teeth) mm 1976 2022 2068 1931ft 6.5 6.6 6.8 6.3
Reach with Lift Arms Horizontal and Bucket Level mm 3657 3722 3787 3827ft 12.0 12.2 12.4 12.6
Digging Depth mm 160 160 160 149in 6.3 6.3 6.3 0.5
Overall Length mm 10 842 10 907 10 972 11 003ft 35.6 35.8 36.0 36.1
Overall Height with Bucket at Full Raise mm 6609 6671 6734 6609ft 21.7 21.9 22.1 21.7
Loader Clearance Turning Radius (SAE carry with teeth) mm 17 215 17 248 17 281 17 475ft 56.5 56.6 56.7 57.3
Full Dump Angle deg 50.2 50.2 50.2 50.2
Static Tipping Load Straight (no tire squash) kg 29 147 28 969 28 791 27 906lb 64,259 63,866 63,472 61,522
Static Tipping Load Straight (with tire squash) kg 27 698 27 509 27 319 26 476lb 61,064 60,647 60,228 58,370
Static Tipping Load Full Turn (articluated 35) (no tire squash) kg 25 845 25 673 25 501 24 599lb 56,979 56,600 56,220 54,231
Static Tipping Load Full Turn (articluated 35) (with tire squash) kg 23 846 23 661 23 476 22 622lb 52,571 52,164 51,756 49,873
Breakout Force kN 356 341 328 335lb-f 79,945 76,722 73,722 75,311
Operating Weight kg 42 011 42 118 42 225 43 119lb 92,618 92,855 93,090 95,061
Weight Distribution at SAE Carry (unloaded) Front kg 20 493 20 689 20 885 22 443lb 45,178 45,612 46,044 49,478
Weight Distribution at SAE Carry (unloaded) Rear kg 21 518 21 429 21 340 20 676lb 47,439 47,242 47,046 45,583
Weight Distribution at SAE Carry (loaded) Front kg 37 109 37 340 37 571 39 031lb 81,811 82,320 82,830 86,049
Weight Distribution at SAE Carry (loaded) Rear kg 14 902 14 778 14 654 14 088lb 32,853 32,580 32,307 31,059
-
Operating Specifications Standard LiftTires: 35/65-33 Part Number: 359-4566
Bucket Type General Purpose CoalGround Engaging Tools Segments SegmentsCutting Edge Type Straight StraightBucket Part No. 436-8310 436-8320 436-8330 436-8340Struck Capacity m3 5.2 5.9 6.6 9.0
yd3 6.8 7.6 8.6 11.8
Heaped Capacity (rated) m3 6.1 6.9 7.7 10.3yd3 8.0 9.0 10.0 13.5
Width mm 3687 3687 3687 3729ft 12.1 12.1 12.1 12.2
Dump Clearance at Full Lift and 45 Discharge (edge) mm 3481 3385 3292 3164ft 11.4 11.1 10.8 10.4
Dump Clearance at Full Lift and 45 Discharge (with teeth) mm ft
Reach at Lift and 45 Discharge (edge) mm 1616 1696 1773 1857ft 5.3 5.6 5.8 6.1
Reach at Lift and 45 Discharge (with teeth) mm ft
Reach with Lift Arms Horizontal and Bucket Level mm 3294 3419 3540 3692ft 10.8 11.2 11.6 12.1
Digging Depth mm 143 143 143 160in 0.5 0.5 0.5 0.5
Overall Length mm 10 465 10 590 10 711 10 877ft 34.3 34.7 35.1 35.7
Overall Height with Bucket at Full Raise mm 6844 6965 7063 7394ft 22.5 22.9 23.2 24.3
Loader Clearance Turning Radius (SAE carry with teeth) mm 17 273 17 336 17 398 17 542ft 56.7 56.9 57.1 57.6
Full Dump Angle deg 50.2 50.2 50.2 50.2
Static Tipping Load Straight (no tire squash) kg 29 367 29 010 28 661 28 343lb 64,743 63,956 63,187 62,486
Static Tipping Load Straight (with tire squash) kg 27 886 27 516 27 143 26 694lb 61,478 60,662 59,840 58,850
Static Tipping Load Full Turn (articluated 35) (no tire squash) kg 26 061 25 717 25 381 25 044lb 57,455 56,696 55,955 55,213
Static Tipping Load Full Turn (articluated 35) (with tire squash) kg 24 025 23 664 23 303 22 810lb 52,966 52,170 51,374 50,287
Breakout Force kN 400 367 340 307lb-f 89,924 82,505 76,435 69,016
Operating Weight kg 41 953 42 165 42 371 42 894lb 92,490 92,958 93,412 94,565
Weight Distribution at SAE Carry (unloaded) Front kg 20 298 20 682 21 056 21 991lb 44,749 45,596 46,420 48,482
Weight Distribution at SAE Carry (unloaded) Rear kg 21 655 21 483 21 315 20 902lb 47,741 47,362 46,991 46,081
Weight Distribution at SAE Carry (loaded) Front kg 36 919 37 370 37 811 37 448lb 81,392 82,387 83,359 82,559
Weight Distribution at SAE Carry (loaded) Rear kg 15 034 14 795 14 560 14 518lb 33,144 32,617 32,099 32,007
23
986H Wheel Loader Specifi cations
-
24
986H Wheel Loader Specifi cations
Operating Specifications High LiftTires: 35/65-33 Part Number: 359-4566
Bucket Type Rock HD RockGround Engaging Tools Teeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade SpadeBucket Part No. 369-2020 369-2030 369-2040 436-8300Struck Capacity m3 4.4 4.8 5.1 4.4
yd3 5.8 6.2 6.7 5.8
Heaped Capacity (rated) m3 5.4 5.7 6.1 5.4yd3 7.0 7.5 8.0 7.0
Width mm 3772 3772 3772 3840ft 12.4 12.4 12.4 12.6
Dump Clearance at Full Lift and 45 Discharge (edge) mm 3879 3833 3787 3833ft 12.7 12.6 12.4 12.6
Dump Clearance at Full Lift and 45 Discharge (with teeth) mm 3738 3693 3647 3618ft 12.3 12.1 12.0 11.9
Reach at Lift and 45 Discharge (edge) mm 1798 1840 1882 1992ft 5.9 6.0 6.2 6.5
Reach at Lift and 45 Discharge (with teeth) mm 1904 1946 1988 2169ft 6.2 6.4 6.5 7.1
Reach with Lift Arms Horizontal and Bucket Level mm 4021 4086 4151 4191ft 13.2 13.4 13.6 13.7
Digging Depth mm 208 208 208 197in 8.2 8.2 8.2 0.6
Overall Length mm 11 290 11 355 11 420 11 453ft 37.0 37.3 37.5 37.6
Overall Height with Bucket at Full Raise mm 7067 7130 7193 7067ft 23.2 23.4 23.6 23.2
Loader Clearance Turning Radius (SAE carry with teeth) mm 17 612 17 648 17 684 17 872ft 57.8 57.9 58.0 58.6
Full Dump Angle deg 49.9 49.9 49.9 49.9
Static Tipping Load Straight (no tire squash) kg 24 759 24 595 24 431 23 528lb 54,584 54,223 53,862 51,870
Static Tipping Load Straight (with tire squash) kg 23 632 23 458 23 284 22 417lb 52,100 51,716 51,332 49,421
Static Tipping Load Full Turn (articluated 35) (no tire squash) kg 21 845 21 686 21 527 20 610lb 48,159 47,809 47,458 45,437
Static Tipping Load Full Turn (articluated 35) (with tire squash) kg 20 251 20 081 19 911 19 033lb 44,646 44,271 43,896 41,961
Breakout Force kN 355 341 328 334lb-f 79,869 76,650 73,652 75,086
Operating Weight kg 42 836 42 943 43 050 43 944lb 94,437 94,673 94,909 96,880
Weight Distribution at SAE Carry (unloaded) Front kg 22 262 22 471 22 680 24 350lb 49,079 49,541 50,002 53,682
Weight Distribution at SAE Carry (unloaded) Rear kg 20 574 20 472 20 370 19 594lb 45,358 45,132 44,907 43,197
Weight Distribution at SAE Carry (loaded) Front kg 38 451 38 691 38 931 40 516lb 84,769 85,299 85,828 89,322
Weight Distribution at SAE Carry (loaded) Rear kg 13 457 13 324 13 191 12 500lb 29,668 29,375 29,081 27,558
-
25
Operating Specifications High LiftTires: 35/65-33 Part Number: 359-4566
Bucket Type General Purpose CoalGround Engaging Tools Segments SegmentsCutting Edge Type Straight StraightBucket Part No. 436-8310 436-8320 436-8330 436-8340Struck Capacity m3 5.2 5.9 6.6 9.0
yd3 6.8 7.6 8.6 11.8
Heaped Capacity (rated) m3 6.1 6.9 7.7 10.3yd3 8.0 9.0 10.0 13.5
Width mm 3687 3687 3687 3729ft 12.1 12.1 12.1 12.2
Dump Clearance at Full Lift and 45 Discharge (edge) mm 4018 3930 3844 3725ft 13.2 12.9 12.6 12.2
Dump Clearance at Full Lift and 45 Discharge (with teeth) mm ft
Reach at Lift and 45 Discharge (edge) mm 1816 1904 1990 2085ft 6.0 6.2 6.5 6.8
Reach at Lift and 45 Discharge (with teeth) mm ft
Reach with Lift Arms Horizontal and Bucket Level mm 3658 3783 3904 4056ft 12.0 12.4 12.8 13.3
Digging Depth mm 190 190 190 208in 0.6 0.6 0.6 0.7
Overall Length mm 10 915 11 040 11 161 11 325ft 35.8 36.2 36.6 37.2
Overall Height with Bucket at Full Raise mm 7303 7423 7522 7853ft 24.0 24.4 24.7 25.8
Loader Clearance Turning Radius (SAE carry with teeth) mm 17 665 17 733 17 801 17 945ft 58.0 58.2 58.4 58.9
Full Dump Angle deg 49.9 49.9 49.9 49.9
Static Tipping Load Straight (no tire squash) kg 24 954 24 627 24 309 23 938lb 55,014 54,293 53,592 52,774
Static Tipping Load Straight (with tire squash) kg 23 802 23 462 23 123 22 642lb 52,474 51,725 50,977 49,917
Static Tipping Load Full Turn (articluated 35) (no tire squash) kg 22 037 21 720 21 412 21 028lb 48,583 47,884 47,205 46,359
Static Tipping Load Full Turn (articluated 35) (with tire squash) kg 20 414 20 083 19 753 19 244lb 45,005 44,275 43,548 42,426
Breakout Force kN 400 367 339 307lb-f 89,924 82,505 76,210 69,016
Operating Weight kg 42 778 42 990 43 196 43 719lb 94,309 94,777 95,231 96,384
Weight Distribution at SAE Carry (unloaded) Front kg 22 062 22 471 22 871 23 853lb 48,638 49,540 50,422 52,587
Weight Distribution at SAE Carry (unloaded) Rear kg 20 716 20 518 20 325 19 866lb 45,671 45,234 44,809 43,797
Weight Distribution at SAE Carry (loaded) Front kg 38 256 38 726 39 185 40 387lb 84,340 85,376 86,388 89,038
Weight Distribution at SAE Carry (loaded) Rear kg 13 593 13 336 13 083 12 404lb 29,967 29,401 28,843 27,346
986H Wheel Loader Specifi cations
-
986H Standard Equipment
26
ELECTRICAL Alarm, back-up Alternator, 115 amp Batteries, dry Battery disconnect switch Converter, 10/15 amp, 24V to 12V Lighting system (halogen, work lights)
OPERATOR ENVIRONMENT Air conditioner Cab, sound suppressed and pressurized Cigar lighter, ashtray Controls, lift and tilt function Heater, defroster Horn Instrumentation, gauges
Coolant temperature Engine hour meter Hydraulic oil temperature Power train oil temperature
Light, cab, dome Lunchbox, beverage holders Mirrors, rearview (externally mounted) Seat, Cat Comfort (cloth), air suspension, six-way adjustable Seat belt, retractable Tinted glass Transmission gear indicator Wet-Arm wipers/washers (front and rear)
Intermittent front and rear wipers
POWER TRAIN Brakes, oil-cooled, multi-disc, service/secondary Driveline parking brake Engine, C15 ACERT diesel, turbocharged/aftercooled Fuel priming pump (electric) Ground level engine shutoff Precleaner, engine air intake (above hood) Radiator Torque converter with LUC Transmission, planetary powershift, 4F/3R electronic control
OTHER Doors, service access (locking) Fuel tank Hitch, drawbar with pin Hoses, Cat XT Hydraulic, steering and brake fi ltration/screening system Muffl ers Oil sampling valves Premixed 50% concentration of extended life coolant
with freeze protection to 34 C (29 F) Steering, load sensing
Standard EquipmentStandard equipment may vary. Consult your Cat dealer for details.
-
27
986H Optional Equipment and Mandatory Attachments
LINKAGE Quick coupler
ELECTRICAL Batteries additional
OPERATOR ENVIRONMENT AM/FM/CD radio Rearview camera (WAVS) LED strobe warning beacon Radio ready
Optional EquipmentWith approximate changes in operating weights. Optional equipment may vary. Consult your Cat dealer for specifi cs.
LINKAGE Autolube Manual grease pins
Standard linkage High lift linkage
ELECTRICAL No Product Link Product Link (Satellite) Product Link (Cellular)
STEERING Standard steering Secondary steering
POWER TRAIN Axle oil cooler Standard axles
LIGHTING Standard lighting (4 fl oods) Deluxe lighting (9 fl oods) HID lighting (4 fl oods, 4 HIDs)
OPERATOR ENVIRONMENT Standard seat Heated seat
HYDRAULICS Ride Control No Ride Control
Two function hydraulic system (standard lift/tilt) Three function hydraulic system (one auxiliary function)
FUEL SYSTEM Cold weather starting package Conventional fuel arrangement
Mandatory AttachmentsSelect one from each group. Mandatory and optional equipment may vary. Consult your Cat dealer for specifi cs.
-
For more complete information on Cat products, dealer services, andindustry solutions, visit us on the web at www.cat.com
2014 CaterpillarAll rights reserved
Materials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, CaterpillarYellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks ofCaterpillarand may not be used without permission.
AEHQ6848-01 (01-2014)Replaces AEHQ6848
986H Wheel LoaderContentsStructuresPower TrainHydraulicsOperator StationTechnology SolutionsSafetyServiceabilityCustomer SupportSustainabilitySystem Match EfficiencyBucket Ground Engaging ToolsSpecificationsEngineOperating SpecificationsTransmissionHydraulic System Lift/TiltHydraulic Cycle TimeService Refill CapacitiesBucketsAxlesBrakesHydraulic System SteeringDimensionsBucket Capacity/Material Density Selection GuideOperating SpecificationsStandard LiftHigh Lift
Standard EquipmentOptional EquipmentMandatory Attachments
top related