canopy_1

www.hilti.in Profis Anchor 2.6.0Input data and results must be checked for agreement with the existing conditions and for plausibility!PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, SchaanCompany:Specifier:Address:Phone I Fax:E-Mail:Benchmark ConsultantsMr. VaibhavAmedabad | Page:Project:Sub-Project I Pos. No.:Date: 1GSRTC Subhash Bridge10/08/2015 Specifier's comments: Canopy Fixing application1 Input dataAnchor type and diameter:HIT-HY 200 + HIT-V (5.8) M20Dynamic set or any suitable annular gap filling solutionEffective embedment depth:hef,act = 250 mm (hef,limit = - mm)Material:5.8Evaluation Service Report:ETA 12/0084Issued I Valid:15/04/2015 | 15/04/2020Proof:Design method SOFA design method + fib (07/2011) - after ETAG BOND testingStand-off installation:eb = 0 mm (no stand-off); t = 16 mmAnchor plate:lx x ly x t = 600 mm x 350 mm x 16 mm; (Recommended plate thickness: not calculatedProfile:no profileBase material: uncracked concrete, C20/25, fc = 20.00 N/mm2; h = 450 mm, Temp. short/long: 40/24 CInstallation:hammer drilled hole, Installation condition: DryReinforcement:no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm (