calculating the time weighted average (twa) noise level and noise dose levels.pdf
Post on 14-Apr-2018
230 Views
Preview:
TRANSCRIPT
-
7/30/2019 Calculating the Time Weighted Average (TWA) Noise Level and Noise Dose Levels.pdf
1/1
Home Contact Products Rental News Resources Help Search Cart
Home > FAQ > TWATel. 888-206-4377
info@noisemeters.com
TWA - Time Weighted Average Noise Levels - and Noise Dose
The TWA shows a worker's daily exposure to occupational noise (normalised to an 8 hour day), taking into account the average levels of noise
and the time spent in each area. This is the parameter that is used by the OSHA Regulations and is essential in assessing a workers exposureand what action should be taken.
Working Out the Noise Dose and TWA
Before working out the worker's TWA you have to measure the different high noise levels that the worker is subjected
throughout a normal working day. The Time Weighted Average is calculated using these noise levels together with the
amount of time that the worker is exposed to them.
TWA
Calculator
First calculate the Noise Dose as: Dose = 100 x (C1/T1 + C2/T2 + C3/T3 + ... + Cn/Tn)
where
Cn = time spent at each noise level Tn = 8
2
(L-90)/5
(L is the measured sound level)
It is often easier to get Tn from a lookup table:
Worked Example
A worker is exposed to 86 dB for six hours and 92 dB for a three
hours, giving a nine hour working day.
Dose = 100 x (6/13.9 + 3/6.1) = 92.3%
L T L T L T L T80 32.0 90 8.0 100 2.0 110 0.50
81 27.9 91 7.0 101 1.7 111 0.44
82 24.3 92 6.1 102 1.5 112 0.38
83 21.1 93 5.3 103 1.3 113 0.33
84 18.4 94 4.6 104 1.1 114 0.29
85 16.0 95 4.0 105 1.0 115 0.25
86 13.9 96 3.5 106 0.87 116 0.22
87 12.1 97 3.0 107 0.76 117 0.19
88 10.6 98 2.6 108 0.66 118 0.16
89 9.2 99 2.3 109 0.57 119 0.14
Once you have the Dose% figure, you can calculate the TWA using the following equation:
TWA = 16.61 Log10 (D/100) + 90 where TWA is the 8-hour Time Weighted Average Sound Level
D is the Dose % as calculated above (or measured with a dosimeter)
Log10 is the Logarithm to base 10
Worked Example continued...
From our example above
TWA = 16.61 x Log10 (92.3 / 100) + 90 = 89.4 dB
The OSHA action levels are based on either TWA or Dose % (which are different representations of the same number). These action levels are
85 dB (or 50% Dose) and 90 dB (or 100% Dose).
Too Complicated?For workers who are moving between many different noisy locations it is usually easier to use a Noise Dosimeter. This device is attached to
the worker at the start of the day and left to monitor the actual noise exposure. The dosimeter will usually provide you with the TWA and the
Dose %, so there is no need to make any calculations.
< OSHA Noise Regulations
Home - Contact - Products - News - Resources - Links - Search - Help - Mobile Site
Occupational - Environmental - Noise Signs - Accessories - Special Offers - Rental
Telephone 888-206-4377
info@noisemeters.com
culating the Time Weighted Average (TWA) Noise Level and Nois... http://www.noisemeters.com/help/osha/twa.asp
1 10/9/2012 3:16 PM
top related