bzupages.com. presented to: sir ahmed karim presented by: muhammad faisal rao malik shabaz asif...

BZUPAGES.COM

BZUPAGES.COM

PRESENTED TO: SIR AHMED KARIMPRESENTED BY: MUHAMMAD FAISAL RAO Malik Shabaz Asif BIT-07-49 Department Of Information Technology Institute Of Computing B.Z.U Multan

BZUPAGES.COM

BZUPAGES.COM

Scheduled Tasks is a task scheduler that’s installed with Windows Server 2003.

You can use it to launch applications and utilities on a schedule you devise.

The best use of Scheduled Tasks is to make sure maintenance tools run regularly.

The tasks you create are files (with the extension .job) that can be

exchanged via e-mail, or copied to remote computers, permitting you to create and run scheduled tasks on other computers.

BZUPAGES.COM

The .job task files are located in %System Root%\Tasks.

You can launch this utility from Control Panel.

The Scheduled Tasks window opens to display an icon named Add

Scheduled Task, along with icons for any existing tasks.

Be sure the date and time of the computer are correct when you’re running scheduled tasks.

BZUPAGES.COM

The utility runs as a DLL launched by explorer.exe, with the path statement:

%System Root%\explorer.exe

::{20D04FE0-3AEA-1069-A2D8-08002B30309D}\::{21EC20203AEA-1069-A2DD-08002B30

309D}\::{D6277990-4C6A-11CF-8D87-00AA0060F5BF}

BZUPAGES.COM

where:

{20D04FE0-3AEA-1069-A2D8-08002B30309D} is a CLSID for My Computer objects.

{21EC2020-3AEA-1069-A2DD-08002B30309D} is a CLSID for Control Panel objects.

{D6277990-4C6A-11CF-8D87-00AA0060F5BF} is a CLSID for a variety of icons and objects referencing mstask.dll.

BZUPAGES.COM

Open the Add Scheduled Task icon to launch the wizard, and click Next to move past the welcome window. The wizard presents a list of the application files on your computer

BZUPAGES.COM

BZUPAGES.COM

BZUPAGES.COM

If you want to leap right to the Properties dialog to configure your task, instead of stepping through the wizard, use one of these methods to create a new task:

BZUPAGES.COM

Choose File | New | Scheduled Task in the Scheduled Tasks window.

Right-click a blank spot in the Scheduled Tasks window and choose New |Scheduled Task from the shortcut menu.

A new icon appears in the window, titled New Task. The title is in Edit mode so that you can enter a name for the new task. After you name the task, right-click its icon and choose Properties from the shortcut menu to open the task’s Properties dialog.

BZUPAGES.COM

To change the properties of any task, open the Scheduled Tasks window and then open the task. Move to the appropriate tab of the Properties dialog and make the needed changes. To delete a scheduled task, select it and choose your favorite method for deleting:

Press the DEL key. Click the Delete icon on the toolbar. Right-click the task and choose Delete from the shortcut menu. Choose Delete from the File menu.

Deleted tasks are sent to the Recycle Bin. If you don’t want a task to run, but you think you might need it in the future, instead of deleting it, disable it.

To do that, clear the Enabled check box on the Task tab of the task’s Properties dialog.

BZUPAGES.COM

You can run any task at any time if you don’t want to wait for the next scheduled occurrence.

In the Scheduled Tasks window, select the task and choose File | Run, or right-click the task and choose Run from the shortcut menu.

If a task is running and you want to stop it, open the Scheduled Tasks window, rightclick the task’s object, and choose End Task from the shortcut menu. It may take a moment or two for the message to reach the task.

BZUPAGES.COM

You can gain information about the status of a task by changing the view of the Scheduled

Tasks window to the Details view. The columns provide information about each task.

BZUPAGES.COM

BZUPAGES.COM

The Advanced menu in the Scheduled Tasks window offers options for manipulating the

way scheduled tasks operate:

BZUPAGES.COM

Selecting this command disables any scheduled tasks until you return to the Advanced menu and select Start Using Task Scheduler.

In addition, the Task Scheduler will not automatically run the next time you start

Windows Server 2003 unless you’ve restarted it before rebooting.

BZUPAGES.COM

Use this command to temporarily halt running tasks and prevent scheduled tasks from starting.

This command is useful for stopping tasks while you install software.

To resume scheduled tasks, select Continue Task Scheduler from the Advanced menu.

Any tasks scheduled to run during the time you paused the Task Scheduler will not run until their next scheduled times.

BZUPAGES.COM

This command does not mean what it says. It does not notify you of missed tasks; it only notifies you about a failure of the Schedule Task service itself. Tasks that fail to run due to corrupt or missing executables don’t kick off a notification.

BZUPAGES.COM

Use this command to change the user account that runs tasks that are scheduled with the AT command (the default account is System). Selecting the command opens the AT Service Account Configuration dialog, where you can select a user account (and enter and confirm the password for that account). This is almost never a good idea; you should usually let the System account run tasks.

BZUPAGES.COM

Select this command to open the task log in Notepad, where you can track the success or failure of your scheduled tasks.

BZUPAGES.COM

If you want to leap right to the Properties dialog to configure your task, instead of stepping

through the wizard, use one of these methods to create a new task

BZUPAGES.COM

Choose File | New | Scheduled Task in the Scheduled Tasks window.

Right-click a blank spot in the Scheduled Tasks window choose New |Scheduled task from the shortcut menu.

BZUPAGES.COM

A new icon appears in the window, titled New Task. The title is in Edit mode so that you can enter a name for the new task. After you name the task, right-click its icon

and choose Properties from the shortcut menu to open the task’s Properties dialog

BZUPAGES.COM

BZUPAGES.COM

The Schedule tab is the place to specify the frequency for the schedule,

but there’s a difference between the options presented in the wizard and

Those presented in the Properties dialog.

BZUPAGES.COM

The difference is a missing ingredient. The wizard offers a Weekdays

option when you select Daily; the Properties dialog doesn’t. If you want to run this task

only on weekdays, you must select Weekly and then click the five business days of the week to create your workweek

BZUPAGES.COM

You can narrow or broaden the schedule configuration by clicking Advanced, and

choosing the appropriate options

BZUPAGES.COM

The Settings tab offers options that let you control the way the task operates under certain system conditions

BZUPAGES.COM

Delete the task if it is not scheduled to run again. This applies to tasks that have

an end date (including tasks that are run once, of course). The job, along with its

file, is removed after the last automatic occurrence. Don’t select this option if this

task might be reincarnated periodically

BZUPAGES.COM

Stop the task if it runs for: specified time. Enter the duration of time you’ll

permit for this task to complete its job (the default is 72 hours, which is

ridiculous). This option is useful for time-consuming tasks that you configure

for middle-of-the-night operations and you want to make sure they’re not

running when the business day begins

BZUPAGES.COM

BZUPAGES.COM

The Security tab for scheduled tasks is back! If you’re moving to Windows Server 2003

From Windows NT 4, you didn’t know that it went missing but Windows 2000 eliminated

BZUPAGES.COM

To delete a scheduled task, select it and choose your favorite method for deleting:

Press the DEL key. Click the Delete icon on the toolbar. Right-click the task and choose Delete from

the shortcut menu. Choose Delete from the File menu. Deleted tasks are sent to the Recycle Bin.

BZUPAGES.COM

think you might need it in the future, instead of deleting it, disable it. To do that, clear

the Enabled check box on the Task tab of the task’s Properties dialog

BZUPAGES.COM

Any Questions…?