bs en 16228 drill rig safety m - equipe group 3 - bs en 16228 drill...drill rig safety bs en 16228 m...
Post on 09-Feb-2020
36 Views
Preview:
TRANSCRIPT
ww
w.e
qu
ipe
gro
up
.co
mBS EN 16228DRILL RIG SAFETY
Keith Spires, Operations Director, Equipe
124/03/2015
ww
w.e
qu
ipe
gro
up
.co
m
224/03/2015
In October last year the long awaited new drill rig safety standards 16228 was adopted by the UK.
The question is: Have they really helped?
?
ww
w.e
qu
ipe
gro
up
.co
m
Part 2
When drill rigs are equipped with guards, these guards shall comply with the following:
— Maximum height of the bottom edge of the guard shall be up to 500mm from ground level or not more than 200mm above the upper clamps/jaws;
324/03/2015
ww
w.e
qu
ipe
gro
up
.co
m
424/03/2015
Is this guard compliant with BS EN 16228
Is it compliant with PUWER
?
ww
w.e
qu
ipe
gro
up
.co
m
Part 2
The restricted operating mode shall be applicable in the danger zone, where persons can reach moving parts up to a height of 2.5m from ground level or from the level a person is standing.
524/03/2015
ww
w.e
qu
ipe
gro
up
.co
m
624/03/2015
Is this guard compliant with BS EN 16228
Is it compliant with PUWER
?
ww
w.e
qu
ipe
gro
up
.co
mRestricted operating mode (ROM)
A rotational speed of not more than 30rpm or
“inching mode” that is no more than half a
revolution per activation in the danger zone;
724/03/2015
ww
w.e
qu
ipe
gro
up
.co
m
824/03/2015
Does that mean a slowly rotating auger doesn’t need a guard
?
ww
w.e
qu
ipe
gro
up
.co
m
A powered drill rod break out system shall be
installed on drilling and foundation equipment
using threaded drill rods.
924/03/2015
ww
w.e
qu
ipe
gro
up
.co
m
All mechanical or hydraulic rod clamps and rod
breaking clamps shall be designed and equipped
to protect against the hazards during operation
and maintenance of:
— entrapment;
— shearing;
— crushing.
1024/03/2015
ww
w.e
qu
ipe
gro
up
.co
mIf the mass of a tool and the working process
causes any person to handle more than 25kg,
the drilling and foundation equipment shall be
provided with a mechanized tool handling system,
e.g. carousel, magazine, robot arm etc.
1124/03/2015
ww
w.e
qu
ipe
gro
up
.co
mDrilling and foundation equipment using either
compressed air or air mist as a flushing agent
shall be fitted with a system to prevent injury to
persons from ejected material or dust, e.g. dust
collectors, diverters/deflectors etc.
1224/03/2015
ww
w.e
qu
ipe
gro
up
.co
m
1324/03/2015
Perhaps the use of modern rigs with breakout and the guards which we have become accustomed to is still the answer…
ww
w.e
qu
ipe
gro
up
.co
m
1424/03/2015
Dynamic Sampling Rigs
Does BS EN 16228 apply
Is this guard compliant with BS EN 16228
Is it compliant with PUWER
?
top related