bolting tools final 2 - amazon s3 · 2015-03-30 · tu series square drive hydraulic wrenches page...
Post on 29-Mar-2020
2 Views
Preview:
TRANSCRIPT
BOLTING TOOLS
www.powermaster.inTools for every conceivable need.....
Distribution available in over 110 countries worldwide.
Houston, Texas (USA) Casselman, Ontario (Canada) Schmallenberg (Germany)
St. Louis, Missouri (USA) Edmonton, Alberta (Canada)
Sharjah (UAE)
Kuala Lumpur (Malaysia)
Global Branch Offices
Sales and Service Centers
A-87, T.T.C. Indl. Area, M.I.D.C,
Thane Belapur Road, Khairne,
New Bombay - 400 705, INDIA.
Tel. : +91.22.2778 1938
Fax : +91.22.2778 0339
NEW BOMBAY PUNE BANGALORET-3, 3rd Floor, Plot No. 84,
Survay No. 282, Tanagi Nagar,
Chichwad Gaon,
Pune - 400 033, INDIA.
# 1835, 14th Cross,
22nd Main, Sector - I,
HSR layout,
Bangalore - 560 034, INDIA.
5 & 18, Rashmi Indl. Estate No.1,
Vasai Road (East),
Dist. Thane - 401 202, INDIA.
Tel. : +91.250.2392021
Fax : +91.250.2391576
42 & 43, Manish Indl. Estate No.5,
Vasai Road (East),
Dist. Thane - 401 202, INDIA.
9 & 14, Rashmi Indl. Estate No.1,
Vasai Road (East),
Dist. Thane - 401 202, INDIA.
Plants
W-224, T.T.C. Indl. Area, M.I.D.C, Thane Belapur Road, Khairne, New Bombay - 400 705, INDIA.
Tel. : +91.22.2778 1934
Fax : +91.22.2778 0339
Product Development Center
229, Pragati Industrial Estate, 316 N. M. Joshi Marg, Chinchpokli, Bombay - 400 011, INDIA.
Tel. : +91.22.2300 0015
Fax : +91.22.2307 3761
Corporate Headquarters
carries the worlds most comprehensive life of
Bolting Tools. Whether you need manual or hydraulic, air driven or Electric.
We are your one stop shop for all your Bolting needs.
for years has been recognised as a significant world
player in the manufacture and supply of quality Hydraulic Torque Wrenches,
Bolt Tensioners, Pumps and other Bolting Tools for Power, Mining, Refinery,
Steel, Petrochemical and other Heavy Industries.
TU SERIES SQUARE DRIVE HYDRAULIC WRENCHES PAGE 4-5
TX SERIES LOW CLEARANCE HYDRAULIC WRENCHES PAGE 6-8
PUMPS FOR USE WITH HYDRAULIC WRENCHES PAGE 10
BOLTING SERVICES / RENTAL PROGRAMS PAGE 9
CLASSIC MECHANICAL CLICK TORQUE WRENCHES PAGE 15-18
BACKUP WRENCHES PAGE 11
CLASSIC MECHANICAL TORQUE MULTIPLIERS PAGE 19-22
PNEUMATIC TORQUE WRENCHES PAGE 12-14
POWER SPLITTER HYDRAULIC NUT SPLITTERS PAGE 23-24
POWER SPREADER FLANGE SPREADERS PAGE 25
HYDRAULIC VERTICAL LIFTING & SPREADING WEDGE PAGE 26-27
HYDRAULIC BOLT TENSIONERS PAGE 28-32
SPRING BALANCERS PAGE 33-34
IMPACT WRENCHES PAGE 35
3
Length 1
Radius
Height
Length 2
Width 2
Width 1
Width 3
Technical
Square Drive 3/4” 1” 1.1/2” 1.1/2” 2.1/2” 2.1/2”
Min. Torque Kg-m(Ft/Lbs) 17(127) 45(330) 102(740) 152(1,100) 376(2,720) 801(5,800)
Max. Torque Kg-m(Ft/Lbs) 175(1,270) 460(3,330) 1020(7,400) 1520(11,010) 3760(27,200) 8018(58,000)
Output Accuracy +/-3% +/-3% +/-3% +/-3% +/-3% +/-3%
Repeatability 100% 100% 100% 100% 100% 100%
Duty Cycle 100% 100% 100% 100% 100% 100%
Tool Weight Kgs/(Lbs) 1.77/(3.90) 4.09/(9.00) 8.64/(19.00) 13.18/(29.00) 31.81/(70.00) 59.00/(130.00)
TU-2Model No. TU-3 TU-7 TU-11 TU-27 TU-60
Note : All tool weights include Couplers, Swivels, Reaction Arm and Internal Oil.
The Patented Mono-Body Housing is standard on all models.
DimensionsTU-2 TU-3 TU-7 TU-11 TU-27 TU-60
Height 106.68 4.20 134.62 5.30 177.55 6.99 197.87 7.79 258.83 10.19 292.10 11.50
Length 1 118.87 4.68 154.94 6.10 203.20 8.00 233.93 9.21 312.17 12.29 390.65 15.38
Length 2 157.48 6.20 205.74 8.10 272.80 10.74 310.13 12.21 413.77 16.29 518.16 20.40
Radius 24.89 0.98 33.02 1.30 43.18 1.70 49.53 1.95 61.72 2.43 73.66 2.90
Width 1 50.80 2.00 66.54 2.62 91.69 3.61 99.82 3.93 133.60 5.26 167.13 6.58
Width 2 70.87 2.79 93.47 3.68 128.52 5.06 137.92 5.43 196.34 7.73 225.80 8.89
Width 3 112.27 4.42 147.57 5.81 202.69 7.98 221.49 8.72 295.40 11.63 368.00 14.49
Model No.inchinch mmmm inch inchmm mm mmmm inchinch
TU SERIES SPECIFICATIONS
Extended ReactionArm Boot
StandardReaction Arm
Allen HexDrive Adapter
Direct SocketDrive
Standard SquareDrive
x e e Rea t TuE t nd d c ion be
TU Accessories
Simply...The Most Advanced Wrench Ever Produced
Are only a few of the Improvements that has brought to the Industry!
Faster Stroke! Less Moving Parts!
Anti-Back Lash Mechanism! Patented Mono-Body Housing!
Hands-Off Operation! Unique Design to Fit Every Application!
Accurate Repeatability!
POWERMASTERhas in stock application
specific accessories to fit on your job!
CallPOWERMASTERtoday for help
with your application specification!4
Tensioners...Impact Wrenches...Nut Runners...
are no match forA TU Hydraulic Wrench on
any application !!
Other Hydraulic Wrench manufacturers?
Not a chance!!
161
2
3
4
5
6
78 11
9
10
14
15
13
12
The Multi-Application TU Series is the tool of choice on every
application in every industry. Whether in a steel mill, on an offshore
drill platform or diving to the ocean bottom a TU Wrench
will OUTPERFORM every other method of tightening threaded
fasteners.
TU-2 Achieves ProperTorque in Seconds !
TU-10 The Workhorse inPower Generation
1 Patented Mono-Body Housing A TorcUP exclusive!!
2 Balanced Drive Rod Side load free piston movement.
3 Never-Lock Drive Pawl Ensures tool will NEVER lock up.
4 Anti-Back Lash Mechanism Provides hands free operation.
5 Laser Engraved Torque Chart No more searching for charts.
6 Multi-Tooth Ratchet Allows for 27 degree torque stroke accuracy.
7 One Piece Drive Plate Robust alloy provides for small nose radius.
8 Push-Through-Drive Simply push to switch from loosen to tighten.
9 Single Seal Piston Assures extended maintenance free operation.
10 Direct Housing Reaction Allows use of tool without reaction arm.
11 Steel Reaction Boot Field replaceable feature protects reaction arm.
12 Long Length Reaction Arm Allows for reaction on all applications.
13 Reaction Arm Release Button Protected within reaction arm housing.
14 360 x 360 Swivel Allows hose to be cleared on all applications.
15 No-Drip Quick Connect Couplers Assures easy and safe operation.
16 Steel Alloy Piston Robust composition allows for longer operation cycle.
TU SERIES FEATURES
TU Square Drive - The Performer
5
The Patented Peanut Shaped Cylinder Bore is standard on TX-2, TX-4 and TX-8 models.
Note : All tool weights include Couplers, Swivels and Internal Oil.
Dimensions
Length 144.00 5.67 198.12 7.80 248.92 9.80 328.42 12.93 388.62 15.30
Height 101.60 4.00 142.24 5.60 177.80 7.00 192.53 7.58 276.86 10.90
Width 31.75 1.25 41.40 1.63 52.07 2.05 63.50 2.50 82.30 3.24
Radius 9.14 0.36 11.68 0.46 13.72 0.54 16.51 0.65 23.62 0.93
Model No.TX-2 TX-4
mm inch mm inch mm inch mm inch mm inch
TX-8 TX-16 TX-32
Technical
Tool Hex from 19mm / 3/4” 25mm / 1” 50mm / 1.7/8” 65mm / 2.5/8” 80mm / 3.1/8”
to 60mm / 2.3/8” 80mm / 3.1/8” 105mm / 4” 115mm / 4.5/8” 155mm / 6.1/8”
Min. Torque Kg-m (Ft/Lbs) 26 (192) 54 (395) 115 (830) 215 (1,560) 445 (3,220)
Max. Torque Kg-m (Ft/Lbs) 260 (1,928) 540 (3,950) 1192 (8,630) 2293 (16,600) 4924 (35,650)
Output Accuracy +/- 3% +/- 3% +/- 3% +/- 3% +/- 3%
Repeatability 100% 100% 100% 100% 100%
Duty Cycle 100% 100% 100% 100% 100%
Corrosion Protection Standard
Cylinder Weight Kgs / (Lbs) 1.59 / (3.50) 2.73 / (6.00) 5.32 / (11.70) 7.27 / (16.00) 11.82 / (26.00)
Link Weight from Kgs / (Lbs) 1.09 / (2.40) 2.45 / (5.40) 5.41 / (11.90) 9.55 / (21.00) 13.18 / (29.00)
to Kgs / (Lbs) 1.59 / (3.50) 3.45 / (7.60) 6.59 / (14.50) 12.73 / (28.00) 17.95 / (39.50)
TX-2Model No. TX-4 TX-8 TX-16 TX-32
TX SERIES SPECIFICATIONS
Simply...The Flattest Hydraulic Wrench Ever Produced
Flat Design from Cylinder to Link! Less Moving Parts!
Unique Peanut Shaped Piston! Accurate Repeatability!
Direct Flow Oil Distribution for Faster Stroke! Hands-Off Operation!
Are only a few of the reasons why the TX is the only tool of its kind!
Square DriveAdapter
Stack Socket
Hex Reducer Insert
Low PointReaction Paddle
Extended Reaction Arm
When clearance is an issue... TX is the answer!TX accessories allow you to convert your low profile
system into a multi-application systemsimply by inserting hex accessories.
Call
to solve any of your limited area,low clearance bolting
POWERMASTER
applications.
TU Accessories
Width
Height
Radius
Length
6
TX saves time whenprecise torque is required
111213
1
2
3
4
5 6 78
9 10
Tensioners - Too Big To Fit!
Multipliers - Too Big To Fit!
Nut Runners - Too Big To Fit!
Impact Wrenches - Too Big To Fit!
Other Hydraulic Wrenches - Too Big To Fit!
Clearance ABOVE The Nut - No Problem For A TX!
Clearance BEHIND The Nut - No Problem For A TX!
Clearance BETWEEN The Nut - No Problem For A TX!
The Patented Peanut Shape Piston Design assures
That your application will have the correct torque applied
every time.
1 Patented “Peanut Shaped Cylinder” Fit both the cylinder and l ink in confined areas.
2 Engagement Rod Automatically engages l ink on the first stroke.
3 Never-Lock Drive Pawl Ensures tool will NEVER lock up.
4 Multi-Tooth Ratchet Allows for 27 degree torque stroke accuracy.
5 One Piece Drive Plate Robust alloy provides for small nose radius.
6 Link Pin One pin for link to cylinder engagement.
No tools required.
7 In-Line Reaction Pad Assures torsion free reaction every time.
8 Steel Alignment Pin Assures equal load displacement between side plates.
9 Piston Tension O-Ring Tension locks piston seal into “Peanut” bore.
10 Completely Flat Design Cylinder and link width are equal for tight fits.
11 360 x 360 Swivel Allows hose to be cleared on all applications.
12 Teflon Piston Seal Patented technology provides years of
maintenance free use.
13 Slider Prevents wear of piston or drive plate.
Reduces costly repairs.
TX SERIES FEATURES
TX Low Profile - The Solution
TX cylinder and link arethe same width. A TorcUP exclusive.
7
TX SERIES HEX LINK PART NUMBERSTX-2 Link Hex TX-4 Link Hex TX-8 Link Hex TX-16 Link Hex TX-32 Link Hex
Number Size Number Size Number Size Number Size Number Size
TX-2RL012 3/4” TX-4RL100 1” TX-8RL114 1.7/8” TX-16RL210 2.5/8” TX-32RL302 3.1/8”
TX-2RL013 13/16” TX-4RL101 1.1/16” TX-8RL115 1.15/16” TX-16RL211 2.11/16” TX-32RL303 3.3/16”
TX-2RL014 7/8” TX-4RL102 1.1/8” TX-8RL200 2” TX-16RL212 2.3/4” TX-32RL304 3.1/4”
TX-2RL015 15/16” TX-4RL103 1.3/16” TX-8RL201 2.1/16” TX-16RL213 2.13/16” TX-32RL305 3.5/16”
TX-2RL100 1” TX-4RL104 1.1/4” TX-8RL202 2.1/8” TX-16RL214 2.7/8” TX-32RL306 3.3/8”
TX-2RL101 1.1/16” TX-4RL105 1.5/16” TX-8RL203 2.3/16” TX-16RL215 2.15/16” TX-32RL307 3.7/16”
TX-2RL102 1.1/8” TX-4RL106 1.3/8” TX-8RL204 2.1/4” TX-16RL300 3” TX-32RL308 3.1/2”
TX-2RL103 1.3/16” TX-4RL107 1.7/16” TX-8RL205 2.5/16” TX-16RL301 3.1/16” TX-32RL309 3.9/16”
TX-2RL104 1.1/4” TX-4RL108 1.1/2” TX-8RL206 2.3/8” TX-16RL302 3.1/8” TX-32RL310 3.5/8”
TX-2RL105 1.5/16” TX-4RL109 1.9/16” TX-8RL207 2.7/16” TX-16RL303 3.3/16” TX-32RL311 3.11/16”
TX-2RL106 1.3/8” TX-4RL110 1.5/8” TX-8RL208 2.1/2” TX-16RL304 3.1/4” TX-32RL312 3.3/4”
TX-2RL107 1.7/16” TX-4RL111 1.11/16” TX-8RL209 2.9/16” TX-16RL305 3.5/16” TX-32RL313 3.13/16”
TX-2RL108 1.1/2” TX-4RL112 1.3/4” TX-8RL210 2.5/8” TX-16RL306 3.3/8” TX-32RL314 3.7/8”
TX-2RL109 1.9/16” TX-4RL113 1.13/16” TX-8RL211 2.11/16” TX-16RL307 3.7/16” TX-32RL315 3.15/16”
TX-2RL110 1.5/8” TX-4RL114 1.7/8” TX-8RL212 2.3/4” TX-16RL308 3.1/2” TX-32RL400 4”
TX-2RL111 1.11/16” TX-4RL115 1.15/16” TX-8RL213 2.13/16” TX-16RL309 3.9/16” TX-32RL401 4.1/16”
TX-2RL112 1.3/4” TX-4RL200 2” TX-8RL214 2.7/8” TX-16RL310 3.5/8” TX-32RL402 4.1/8”
TX-2RL113 1.13/16” TX-4RL201 2.1/16” TX-8RL215 2.15/16” TX-16RL311 3.11/16” TX-32RL403 4.3/16”
TX-2RL114 1.7/8” TX-4RL202 2.1/8” TX-8RL300 3” TX-16RL312 3.3/4” TX-32RL404 4.1/4”
TX-2RL115 1.15/16” TX-4RL203 2.3/16” TX-8RL301 3.1/16” TX-16RL313 3.13/16” TX-32RL405 4.5/16”
TX-2RL200 2” TX-4RL204 2.1/4” TX-8RL302 3.1/8” TX-16RL314 3.7/8” TX-32RL406 4.3/8”
TX-2RL201 2.1/16” TX-4RL205 2.5/16” TX-8RL303 3.3/16” TX-16RL315 3.15/16” TX-32RL407 4.7/16”
TX-2RL202 2.1/8” TX-4RL206 2.3/8” TX-8RL304 3.1/4” TX-16RL400 4” TX-32RL408 4.1/2”
TX-2RL203 2.3/16” TX-4RL207 2.7/16” TX-8RL305 3.5/16” TX-16RL401 4.1/16” TX-32RL409 4.9/16”
TX-2RL204 2.1/4” TX-4RL208 2.1/2” TX-8RL306 3.3/8” TX-16RL402 4.1/8” TX-32RL410 4.5/8”
TX-2RL205 2.5/16” TX-4RL209 2.9/16” TX-8RL307 3.7/16” TX-16RL403 4.3/16” TX-32RL411 4.11/16”
TX-2RL206 2.3/8” TX-4RL210 2.5/8” TX-8RL308 3.1/2” TX-16RL404 4.1/4” TX-32RL412 4.3/4”
TX-4RL211 2.11/16” TX-8RL309 3.9/16” TX-16RL405 4.5/16” TX-32RL413 4.13/16”
TX-4RL212 2.3/4” TX-8RL310 3.5/8” TX-16RL406 4.3/8” TX-32RL414 4.7/8”
TX-4RL213 2.13/16” TX-8RL311 3.11/16” TX-16RL407 4.7/16” TX-32RL415 4.15/16”
TX-4RL214 2.7/8” TX-8RL312 3.3/4” TX-16RL408 4.1/2” TX-32RL500 5”
TX-4RL215 2.15/16” TX-8RL313 3.13/16” TX-16RL409 4.9/16” TX-32RL501 5.1/16”
TX-4RL300 3” TX-8RL314 3.7/8” TX-16RL410 4.5/8” TX-32RL502 5.1/8”
TX-4RL301 3.1/16” TX-8RL315 3.15/16” TX-32RL503 5.3/16”
TX-4RL302 3.1/8” TX-8RL400 4” TX-32RL504 5.1/4”
TX-32RL505 5.5/16”
TX-32RL506 5.3/8”
TX-32RL507 5.7/16”
TX-32RL508 5.1/2”
TX-32RL509 5.9/16”
TX-32RL510 5.5/8”
TX-32RL511 5.11/16”
TX-32RL512 5.3/4”
TX-32RL513 5.13/16”
TX-32RL514 5.7/8”
TX-32RL515 5.15/16”
TX-32RL600 6”
TX-32RL601 6.1/16”
TX-32RL602 6.1/8”All TX series links are available in MM sizes also. Consult POWERMASTER for part numbers.
Change sizes by removing single link pin
8
QUADRA-TORC SYSTEM
Quadra-Torc - Fast-Accurate-Even Bolt Load
Get Into Speed Torque Mode With Quadra-Torc!
The primary focus of the Quadra-Torc System is to eliminate the common “Criss-Cross” bolt tightening
pattern that causes constant crush or over torque of gaskets. With the Quadra-Torc System multi
torque units are utilized along with our Quadra-Torc Hydraulic Pumps. Once the wrenches
are in place a single operator can apply even load at the push of a button. The Quadra-Torc System will
+_evenly close the gap and apply equal torque to 3% accuracy!
Uneven load using one tool
Even and precise load with Quadra-Torc
Powermaster - Offers A Complete Hydraulic Bolting Service......
BOLTING SERVICES
Powermaster Bolting Services offer the following advantages :
Safe : Powermaster supervisors ensure a trouble free job. Powermaster bolting technicians have undergone training from
M/S TorcUP (USA) and our services meet MMS, USCG and DSHA regulations.
Fast : Skilled and experienced crew will allow the job to be completed faster and better than a ‘First Time’ crew.
Economical : Since most companies use hydraulic bolting tools for a small part of the year, in a lot of cases it does not justify the large
investment needed to purchase the tools.
Time Savings : Since Powermaster carries a fleet of hydraulic bolting tools in its ISO-9002 certified facility, our crew can be on site and
on the job in matter of days, versus the weeks and sometimes months it takes for a company to import and commission a new set of
hydraulic bolting tools.
For customers who do not have the need for Powermaster crew, they have the option of renting Powermaster tools at a nominal cost.
Powermaster recommends an orientation of the use of its tools at its factory in Thane, Maharashtra, before the tools are sent out to
the customer on rent. Please contact us for rental information and prices.
RENTAL PROGRAMS
Quadra-Torc four tool system
9
AP1000(Shown with Mono-Port)
Quadra-Torc Multi-Port Manifold (Max. 4 Ports).
Cool running continuous duty axial piston pump.
Powerful 1.5HP industrial duty air motor.
Runs on 50 cfm / 80 PSI of air.
Quiet operation (approx. 80 dBA @ 10,000 PSI).
Rugged remote pendant to control motor and valve.
Easily adjustable pressure control knob.
Auto-dump relieves oil pressure from hoses.
Filter-lubricator for long trouble free operation.
2 Gallon oil reservoir.
Precise PSI/BAR pressure gauge.
Quick-connect no-drip couplers with safety locking collar.
Supplied with dual non-conductive high pressure hose with couplers.
AP1000 -- High Flow - High Speed for Heavy Duty Application
EP1000(Shown with Mono-Port)
Quadra-Torc Multi-Port Manifold (Max. 4 Ports).
Cool running continuous duty axial piston pump.
Single phase induction motor.
115V and 230V available.
Starts under full load.
Runs on reduced voltage.
Quiet operation (approx. 80 dBA @ 10,000 PSI).
Rugged remote pendant to control motor and valve.
Easily adjustable pressure control knob.
Auto-dump relieves oil pressure from hoses.
Completely enclosed motor housing and electronics.
2 Gallon oil reservoir.
Precise PSI/BAR pressure gauge.
Quick-connect no-drip couplers with safety locking collar.
Supplied with dual non-conductive high pressure hose with couplers.
EP1000 -- High Flow - High Speed for Heavy Duty Application
Retract pressure is preset at 1,300 PSI.Standard Roll Bar Dimensions : 25-7/16” L x 20-1/2” H x 166-3/4” W
Resvr.Size(Gal.)
Valve
Control Type
Flow Rate @50 cfm/ 90psi
10,000 psi kg lbs600 psi
WeightMotorSpecifications
2 3 Way/2 Pos.Solenoid 1.5 HP Rotary Air 9.83 lpm 0.82 lpm 27 59
POWER PACKS
Quadra-Torc - (4 Port)Electric
Pneumatic
Retract pressure is preset at 1,300 PSI.
Resvr.Size(Gal.)
Valve
Control Type
Flow Rate 115 VAC
@
10,000 psi kg lbs600 psi
Weight
2 3 Way/2 Pos.Solenoid 1.5 HP Single Phase 11.47 lpm 0.82 lpm 8438
MotorSpecifications
62
0.0
0
470.00370.00
62
0.0
0
470.00370.00
10
QUADRA-TORC PUMP ACCESSORIES
BACKUP WRENCHES
Technical Details:
BC-19M 19 BC-46M 46 BC-012 3/4 BC-200 2
BC-22M 22 BC-50M 50 BC-014 7/8 BC-203 2.3/16
BC-24M 24 BC-55M 55 BC-100 1 BC-206 2.3/8
BC-27M 27 BC-60M 60 BC-102 1.1/8 BC-209 2.9/16
BC-30M 30 BC-65M 65 BC-104 1.1/4 BC-212 2.3/4
BC-32M 32 BC-70M 70 BC-107 1.7/16 BC-215 2.15/16
BC-36M 36 BC-75M 75 BC-110 1.5/8 BC-302 3.1/8
BC-41M 41 BC-80M 80 BC-113 1.13/16
Metric Sizes Standard Sizes
Part No.Part No.Part No. Part No. inch inchmmmm
TBW-1 Wrench Handle
Heavy duty industrial construction.
Ergonomic and Safe.
Totally Mechanical - No Hydraulic.
Easy to release.
Eliminates Striker Wrenches, Shims a Vice Grip Style Backup Wrenches.
Stock in Standard and Metric Sizes.
Features :
Hoses available in all lengths(15’ hose standard with all pumps)
No-Drip Quick-Connect Couplers(Standard on all TorcUP equipment)
11
PTW SERIES PNEUMATIC TORQUE WRENCH
PTW 06Torque Range 90-450 lbs ft / 120-600 NmFree Speed 35 rpmWeight 3.5 Kg.
PTW 10Torque Range 150-725 lbs ft / 200-1000 NmFree Speed 25 rpmWeight 4.8 Kg.
PTW 24Torque Range 475-1750 lbs ft / 650-2400 NmFree Speed 15 rpmWeight 5.9 Kg.
PTW 40Torque Range 950-3000 lbs ft / 1300-4000 NmFree Speed 14 rpmWeight 8.3 Kg.
80
220
190
80
95
240
195
80
95
260
230
85
95
260
360
90
Features :
12
RAPTOR SERIES PNEUMATIC TORQUE WRENCH
RAPTOR 500 “SINGLE SPEED”Torque Range 120-500 lbs ft / 160-675 NmFree Speed 45 rpmWeight 4.1 Kg.
RAPTOR 1000 “SINGLE SPEED”Torque Range 250-1000 lbs ft / 340-1355 NmFree Speed 25 rpmWeight 4.5 Kg.
RAPTOR 2000 “SINGLE SPEED”Torque Range 450-2000 lbs ft / 610-2710 NmFree Speed 20 rpmWeight 5.5 Kg.
RAPTOR 3000 “SINGLE SPEED”Torque Range 740-3000 lbs ft / 1000-4070 NmFree Speed 5 rpmWeight 7.3 Kg.
RAPTOR 6000 “SINGLE SPEED”Torque Range 1000-6000 lbs ft / 1350-8100 NmFree Speed 3 rpmWeight 9.1 Kg.
Max air consumption is 40 CFM at 90 psi full torque.
Features :
13
6.82
.75
7.78
.75
8.35
1.00
9.99
1.00
1.50
7.86
7.86
7.86
7.89
8.16
12.35
2.56
2.62
2.85
4.00
3.44
Deep ReactionStandard ReactionDouble End BlankBlank Reaction
PTW SERIES ACCESSORIES
It is used to regulate the air pressure and properly lubricate the air motor for ultimate life.
Air pressure regulates and controls torque output of Pneumatic torque wrench . All tools must
be used with an FRL unit. It is strongly advised not to exceed the maximum amount
of air pressure.
Model No.L1
mminch mm mm mm mm mm
L2 L3 D1
PE 1206 3/4 210 150 185 70 45 100
PE 12008 3/4 260 200 235 70 45 100
PE 1210 3/4 310 250 285 70 45 100
PE 1608 1 265 200 235 70 52 100
PE 1610 1 315 250 285 70 52 100
PE 1608H 1” 265 200 235 90 60 130
Sq. Drive D2 H
RAPTOR SERIES ACCESSORIES
Part No.
RPA-05.30-WD Raptor 500 & 1000 Weld Blank
RPA-20.30-WD Raptor 2000 & 3000 Weld Blank
RPA-05.10-SARM Raptor 500 & 1000 Straight Reaction Arm
RPA-20.30-SARM Raptor 2000 & 3000 Straight Reaction Arm
RPA-05.10-LARM Raptor 500 & 1000 Extended Reaction Arm
RPA-20.30-LARM Raptor 2000 & 3000 Extended Reaction Arm
RPA-RARM-05.10 Raptor 500 & 1000 Extended Reaction Arm
RPA-RARM-20.10 Raptor 2000 & 3000 Extended Reaction Arm
Custom Custom Reaction Arms Available
RP-FRL Filter / Regulator / Lubricator
Description
Technical Specification:
Reaction Arm:
Wheel Extension
FRL Unit
Extended Arm
Standard Arm
Weld Blank
Straight Arm
Custom Arms
Available
14
L1
L3
L2
D2 D1
H
The ever-increasing need for accurate torque tightening throughout industry, in both manufacturing and servicing demands the use of reliable,
accurate torque wrenches. There are many reasons for insisting on POWERMASTER Torque Wrenches from POWERMASTER.
For certainty and safety ask for POWERMASTER by name and accept no substitutes.
TORQUE WRENCHES
CONVENIENCE IN USEPush-through, userreplaceable square drive.Enables wrench to beturned over and used inopposite direction: withno need to return wrenchto manufacturer for driverepair.
COMPACTHead no wider than atypical socket or, in thec a s e o f r a t c h e t i n gversions, no bigger than atypical ratchet handlehead.I m p r o v e d a c c e s s i nconfined spaces.
ROBUSTE x t r e m e l y s t r o n g
construction.
Resists all but the most
severe accidental damage.
EASE IN USELength calculated toenable a controlled effortat all torque settingsessential in all torquelimiting situations.Av o i d s a c c i d e n t a l l yexceeding required torquesetting so preventingdamage and safety risks.
SECURITYSecure and rapid torquesetting adjustment.E a s i l y a d j u s t e d y e tImpossible to alter byaccident-ensures accuratesetting at all times.
DURABLEHard-wearing, heavy-duty
mechanism.
Retains original accuracy+of 3% for up to 10,000-
o p e r a t i o n s w i t h o u t
Recalibration.
SAFETY IN USEProgressive torque build-up to the selected settingeasily detected by sight,sound and feel.Torque setting cannot beexceeded by accident.Av o i d s m e c h a n i c a ldamage and risk of injury.
ACCURATE IN DESIGNGuaranteed accuracy of +-3% throughout the torque
Range.
E n s u r e s s a f e t y a n d
avoidance of damage.
EASY TO USETORQUE SCALEL a r g e , c l e a r s c a l e
markings in Nm, kg/m,
lbf/in and lbf/ft.
Accurate setting easily
obtained.
ACCURATE IN USEMachanism pivots on the
square drive.
Guaranteed accuracy
wherever the wrench
is grasped.
POWERMASTER Torque Wrenches have proved themselves both reliable and accurate over many years of full service, mastering every
conceivable nut tightening operation in all areas of industry. POWERMASTER Torque Wrenches are available in following three types:
Adjustable click type torque wrenches.
Standard Torque Wrenches
In built ratcheting mechanism provisional for ease of operation
without effecting accuracy & life.
Ratcheting Torque Wrenches These torque wrenches are available in both standard & ratcheting
but have a fixed torque value set to prevent any tempering by
operation.
Production Torque Wrenches
TYPES OF TORQUE WRENCHES
15
3/8” Square Drive
All models are supplied complete with sturdy blow moulded box and a calibration certificate fully traceable to national standards and suitable
for ISO-9000 assessment purposes.
Length WeightSquare DriveTorque Range
PVT-100A 2.5-11 0.3-1.2 20-100 2-8 9.52 3/8 318 12.52 0.56 1.23
PVTR-100 2.5-11 0.3-1.2 20-100 2-8 9.52 3/8 334 12.75 0.65 1.27
PVT-300A 5-34 0.5-3.5 40-300 4-24 9.52 3/8 422 16.60 0.60 1.57
PVTR-300 5-34 0.5-3.5 40-300 4-24 9.52 3/8 443 17.00 0.75 1.62
PVTR-600 12-68 1.2-7 100-600 10-50 9.52 3/8 499 19.50 1.10 2.35
Ref. Ratchet?N.m Kg.m Ibf.in Ibf.ft inchmm inchmm kg lbs
PVT-600A 12-68 1.2-7 100-600 10-50 12.7 476 1.02 2.25
PVT-1200A 25-135 3-14 200-1200 20-100 12.7 1/2 546 21.50 1.62 3.57
PVTR-1200 25-135 3-14 200-1200 20-100 12.7 1/2 555 21.85 2.00 4.40
PVT-2000A 50-225 5-23 400-2000 40-160 12.7 1/2 597 23.50 2.38 5.25
PVTR-2000 50-225 5-23 400-2000 40-160 12.7 1/2 626 24.64 2.49 5.47
PVT-3000A 70-330 7-35 600-3000 50-250 12.7 1/2 825 32.48 3.12 6.86
PVTR-3000 70-330 7-35 600-3000 50-250 12.7 1/2 840 33.07 4.00 8.80
1/2 18.74
Ref. Ratchet?Length WeightSquare DriveTorque Range
N.m Kg.m Ibf.in Ibf.ft inchmm inchmm kg lbs
All models are supplied complete with sturdy blow moulded box and a calibration certificate fully traceable to national standards and suitable
for ISO-9000 assessment purposes.
1/2” Square Drive
38“ 1
2“
Classic Mechanical - Torque Wrenches
TORQUE WRENCHES
16
34“ 1“
PTWX-1500/2000 -
in excess of 1000N.m. This method of increasing the range of the PVT-8400 has the major benefit of being more manageable
in terms of physically applying the torque load (often a two man job), and from a transport and storage point of view.
The extension fits between the ratchet head and the socket. The required torque value is converted to the torque wrench reading
using the supplied chart and the load is applied in the normal way.
1” square drive torque wrench extension. These products have been developed to meet the torque tightening needs
Torque Wrench Extensions
All models are supplied complete with calibration certificate fully traceable to national standards and suitable for ISO-9000
assessment purposes.
3/4” & 1” Square Drive
PVT-5000 140-560 100-410 19.1 1130 13.00
PVTR-5000 140-560 14-57 100-410 19.1 3/4 1210 47.64 6.58 14.50
PVT-7200 200-810 22-82 150-600 19.1 3/4 1181 46.50 6.50 14.30
PVTR-7200 200-810 22-82 150-600 19.1 3/4 1261 49.65 7.00 15.40
PVT-8400 480-940 49-95 350-700 25.4 1 1397 55.00 11.30 24.90
PVTR-8400 480-940 49-95 350-700 19.1 3/4 1471 57.91 12.70 28.00
PVT-12300 700-1400 70-140 500-1000 25.4 1 1505 59.25 15.50 34.10
PVTR-12300 700-1400 70-140 500-1000 25.4 1 1505 59.25 17.00 37.40
TQW-10 1015-1900 105-195 750-1400 25.4 1 1356 53.38 16.50 36.30
TQW-R-10 1015-1900 105-195 750-1400 25.4 1 1356 53.38 18.00 39.60
TQW-11 1350-2700 135-275 1000-2000 25.4 1 1498 58.97 19.50 42.90
TQW-R-11 1350-2700 135-275 1000-2000 25.4 1 1498 58.97 20.60 45.32
14-57 3/4 44.49 5.90
Ref. Ratchet?Length WeightSquare DriveTorque Range
N.m Kg.m Ibf.ft inchmm inchmm kg lbs
PTWX-1500 900-1500 664-1107 25.4 1 740 6.50 14.30
PTWX-2000 1000-2000 738-1476 25.4 1 1390 54.72 11.00 24.20
29.13
Ref.Length WeightSquare DriveTorque Range
N.m Ibf.ft inchmm inchmm kg lbs
TORQUE WRENCHES
Classic Mechanical - Torque Wrenches
17
34“
Material : Light weight high strength alloy body reduces its weight to half of the equivalent conventional Torque Wrenches.
Compact Size : Compact in size with multiple extensions, ensures use at restricted places. Light Weight & Compact Packing makes
handling & transportation easy.
Torque Indication : Short path actuation of gears provide clear impulse & audible signal on reaching set torque values.
Variable Extension : Extension bars can be adjusted to get different extension length as per the operator’s requirement.
Pin Locking : Pin Lock mechanism at Sq. Drive for positive safe locking.
Graduation : Single Scale Graduation for clear reading, Standard scale graduation is in Nm but can be supplied in other scales as
required on request.
Longer Range : 140 Nm to 3000 Nm covered in just four models.
Accuracy : Better than with very high repeatability.
Calibration : Calibration Traceable to National Standards.
Ratcheting Action : Suitable Ratchet Adaptors available to convert to ratchet type Torque Wrench.
Packing : Standard packing is in individual sturdy cardboard box. On request also available in metallic case.
+_3%
Features :
LIGHT WEIGHT TORQUE WRENCHES
Light Weight Mechanical - High Strength Alloy Body
Technical Details:
LTW - 75 140-760 14-76 3/4 810 - 3.5
LTW - 100 520-1000 52-100 3/4 810 +520 5.5
LTW - 200 750-2000 75-200 1 935 +675/1075 11.5
LTW - 300 1500-3000 150-300 1.1/2 935 +675/1075 14
Model No.ExtensionOALSq. DriveRange Weight
mm mm kgKgf mNm inch
TORQUE SCREW DRIVER
1/4” Square Drive Spindle to suit all Standard Sockets & Screw Driver Bits.
Bi-Directional operation with consistent repeat accuracy.
Concealed adjustment mechanism to prevent accidental re-setting during use.
Features :
PTS - 15 1 - 15 1 -15 - 1/4 150 0.270
PTS - 50 10 - 50 10- 50 - 1/4 160 0.350
PTD - 10 - - 10 - 120 1/4 165 0.300
Model No.OALSq. DriveRange Weight
N cm mminch kgKgf cmLbf. Ins
Technical Details:
18
TORQUE MULTIPLIERS
It is a simple gear box, works on the principle of ‘Epicyclic Gearing’. The given load at the input gets multiplied as per the multiplication factor
& transmitted at the output, there by with a minimum efforts you achieve greater load.
Safety - Use of long levers can be dangerous. Torque multipliers mean a reduction in the lever length or operator effort by a factor of 5, 25 or 125.
Space Limitation - The use of a long lever may be impossible due to restricted space.
Accuracy - Torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of
the physical effort from the tightening task.
Handtorque multipliers incorporate an ‘Epicyclic’ or ‘Planetary’ gear train having one or more stages. Each stage of gearing increases the
torque applied by a factor of 5, allowing to offer multipliers in ratios of 5:1, 25:1 and 125:1. In the planetary gear system, torque is applied to the input
gear or ‘Sun’ gear. Three or four planet gears whose teeth are engaged with the sun gear and therefore rotate. The outside
casing of the multiplier, or ‘Annulus’ is also engaged with the planet gear teeth, and would normally rotate in the opposite direction to
the sun gear. A reaction arm prevents the annulus from rotating, and this causes the planet gears to orbit around the sun. The planet gears are
held between input & output plate which also holds the output square drive. Therefore as the planetary gears orbit around the sun gear,
output plate the and so the square drive turns. Without the reaction arm to keep the annulus stationary, the output square will not apply torque.
Why use a Torque Multiplier?
How They Work
What is a Torque Multiplier?
Advantages Of Torque Multipliers :The ratio stated is the true torque multiplication factor.
No correction charts are needed to determine torque output.
Strong, safe Anti Wind-Up Ratchet available on most models for safe and comfortable operation.
A wide range of alternative reaction arms are available as per customers requirement, making the Torque Multiplier adaptable to many
applications.
Handtorque - Multipliers
Output 5000 N.m
25 Revolutions
Input 200 N.m
0.84 Revolutions
= Torque
= Velocity
19
TORQUE MULTIPLIERS
With any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring)
has to be taken up before any useful tightening work is applied to the nut.
Each time the input device is released, the wind-up will rotate it back against
the direction of operation.
The Anti Wind-Up Ratchet retains all of the wind-up forces as they are created,
with the following benefits :
1. The torque input device can not fly backwards against the direction of operation
if it is suddenly released.
2. Without an Anti Wind-Up Ratchet, it will often be necessary to continue to make
360 sweeps with the torque input device otherwise the multiplier will ‘unwind’.
However, obstructions will often make this impossible.
3. With an Anti Wind-Up Ratchet fitted, the multiplier becomes locked onto
The nut because the reaction plate is held hard against the reaction point.
This means that even used upside down, the multiplier will support it’s own weight.
Anti Wind-Up Ratchet (AWUR) :
Safety Note : Additional support is recommended as failure in the bolt, socket or multiplier will release the wind-up forces and cause
the multiplier to drop.
Multiplier behaves like a very stiff ‘Spring’
Multiplier will achieve maximum torqueonly after the ‘Spring’ has been taken up.
In this application, if it takes more than 180°to take up the wind-up at the requiredtorque, this tightening operation will beimpossible without an ‘Anti Wind-UpRatchet’.
= Torque
= Reaction Force
Standard Series Anti Wind-Up Ratchet.
20
A
C
B
TORQUE MULTIPLIERS
* Including reaction plate.
BTM-7 6000 4500 5 3/4 1.1/2 168 174 115 310 18.00 39.60
6000 4500 25 1/2 1.1/2 168 226 115 310 22.00 48.40
9500 7000 25 3/4 1.1/2 195 256 150 350 33.00 72.60
9500 7000 125 1/2 1.1/2 195 301 150 350 35.50 78.10
17000 12500 25 3/4 2.1/2 220 360 164 480 52.00 114.40
17000 12500 125 1/2 2.1/2 220 404 164 480 57.00 125.40
47500 35000 125 3/4 2.1/2 315 550 164 480 80.00 176.00
BTM-7/25Fitted with AWUR
BTM-9/25Fitted with AWUR
BTM-9/125Fitted with AWUR
BTM-11/25Fitted with AWUR
BTM-11/125Fitted with AWUR
BTM-13/125Fitted with AWUR
1700
BTM-5 2700 2000 5 3/4 1 136 135 89 260 8.40 18.48
BTM-5/25 2700 2000 25 1/2 1 136 163 89 260 11.50 25.30
BTM-6 3400 2500 5 3/4 1.1/2 136 149 105 260 9.20 20.24
BTM-6/25 3400 2500 25 1/2 1.1/2 136 176 105 260 12.00 26.40
BTM-2/25 1250 25 1/2 1 115 151 75 164 7.00 15.40
Model No.Weight*Capacity
InputSquare
Aø
OutputSquare
C
min
C
maxRatio
inchinch mmN.m Ibf.ft mm
B
mm mm kg lbs
Standard Series, to 47500 N.m
Handtorque - Standard Series
Features :Accuracy better than +_ 4%.
Precision tightening and loosening of all heavy duty fasteners.
Low energy input with high torque transfer.
Higher capacity multipliers are furnished with strong ratchets (Anti-wind up mechanism) allowing jobs to be performed easily,
efficiently, and safely.
Precision Manufacturing ensures long life and premier quality.
A groove on output Square breaks if over loaded in excess of 20% of its capacity.
Highest possible load factor is guaranteed due to design and use of forged components.
21
NANO SERIES TORQUE MULTIPLIER
Compact, Heavy Duty Torque Multiplier with a torque
multiplication of 5:1.
+_Accuracy better than 4% with high repeatability.
Provided with detachable reaction handle.
Optional offset reaction arm also available on demand.
Supplied in sturdy molded plastic carrying case for
better storage & handling.
Features :
input
Sq. Drive (inch)
OutputModel No.
Lb.ft. Nm.
Capacity
NANO - 17 170 1250 1700 5:1 1/2 3/4 107 115 3.80 4.80
NANO - 28 285 2050 2800 5:1 3/4 1 107 126 3.90 4.90
RatioWeight (Kg)
mm mm With Box
A B
Kgm. Without Box
Note : STM - 2 and STM - 3 are fitted with Anti-Wind-Up Ratchet (AWUR) Mechanism. STM-1 can be provided with AWUR.
STM - 1 2500 1845 255 1 : 8 1/2” F 1” 81 4.3PVTR - 3000
STM - 2 3200 2362 326 1 : 10 1/2” F 1” 88 6.3
STM - 3 4200 3100 428 1 : 10 3/4” F 1.1/2” 88 6.8 PVTR - 5000
Model No.Sq. DriveTorque Capacity Weight
mm kgN m
Reduction
Ratio
RecommendedTorqueWrenchinput outputLb ft Kg m
O.D.
SLIM TORQUE MULTIPLIERS
BD
C
A
STM - 01 STM - 02 STM - 03
A 81 88 88
B 133-175 272 272
C 165 141 151
D 149 207 217
Compact Size : Compact in size hence can be used in constrained areas.
Ratio : Higher reduction ratio for low input.
Safety : Safety shear pin at the input provisioned to prevent overloading.
AWUR : In built Anti-Windup Mechanism reduces operators effort. Can be used with non-ratchet type torque wrench.
Pin Lock : Pin Lock mechanism at output Sq. Drive for positive locking of socket.
Reaction Arm : Different type of reaction arm available as per user requirement.
+_Accuracy : Better than 4% with very high repeatability.
Features :
Slim - Compact In Size
D
C
B
A
198
22
POWER SPLITTERS
Features :Safe : No sparks. No flames. No risk to volatile surroundings. No hammers or impact needed. No flying fragments.
Fast : Cuts a 3” nut in 20 to 30 seconds vs. approx. 20 minites with a hammer & chisel or torch.
Easy Set up : You can be up and away in less than 5 minites.
No Damage to bolt or stud threads by calibrating the chisel so that only the nut is cut.
Versatile : Power splitters cut the hardest nuts. The range of models offered and the range of each model compares very favorably
vs. the competition.
AS-105 11 - 22 16 - 36 38 271 60° 10 38 105 9.82 21.60
AS-200 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 287 45° 13 54 108 10.42 22.90
AS-204 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 385 30° 14 64 164 32.50 71.50
AS-210 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 398 30° 18 73 164 32.86 72.30
AS-308 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 460 30° 19 99 214 72.12 158.66
AS-314 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 488 30° 22 108 214 74.52 163.94
AS-404 64 - 70 2.1/2 - 2.3/4 95 - 108 3.3/4 - 4.1/4 95 579 60° 29 118 251 114.18 251.20
AS-500 76 - 83 3 - 3.1/4 114 - 127 4.1/2 - 5 105 590 60° 29 137 251 116.62 256.56
AS-506 83 - 89 3.1/4 - 3.1/2 124 - 136 4.7/8 - 5.3/8 105 598 60° 29 149 251 119.50 262.90
7/16 - 7/8 5/8 - 1.7/16
Model
No.
WeightA B C D E FStud
Diameter
mm mm mmmm mmmm mminch inch kg lbs
Nut A/FAcrossTheFlats
Power Splitter
* If you have an application not covered by the models above just call us and we will provably be able to design a model for you.
Model
No.
WeightA B C D E FStud
Diameter
mm mm mm mm mm mm mminch inch kg lbs
Nut A/FAcrossTheFlats
Power Splitter Angle Headed
AS-100AH 11 - 16 7/16 - 5/8 13 - 24 1/2 - 1 17.5 190 30° 6 65 72 7 3.2
AS-105AH 11 - 22 7/16 - 7/8 16 - 36 5/8 - 1.7/16 38 280 60° 10 70 105 9 20
AS-200AH 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 290 45° 13 95 108 10 22
AS-204AH 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 410 30° 15 108 164 24 60
AS-210AH 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 420 30° 18 130 164 26 66
AS-308AH 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 500 30° 20 160 214 44 96
AS-314AH 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 510 30° 23 175 214 46 100
For Removing Frozen Nuts The Right Way
SWING
A
D
C
B
E
F
Power Splitter
Model - AS-105toModel - AS-506
Power Splitter Angle Headed
A
D
C
E
D
B
F
15°
SWIN
G
Model - AS-100AHtoModel - AS-314AH
For removing
Frozen nuts
the right way.
Other Anglesplitter
sizes quoted on
request.
23
Note : Shades overlapping into multiple model numbers indicate common parts.
7
8 9
10
54
15
1 2
3
14
13
14
13
87
9
10
4 12 5 6
15
1 211
3
1 Housing
2 Set Screw
3 Allen Wrench
4 Chisel
5 Chisel Holder
6 Spacers Set
7 Set Screw for Chisel Holder
8 Allen Wrench for Chisel Holder
9 Hydraulic Cylinder
10 Quick Disconnect Female Coupler
11 Allen Wrench for Cap Screws
12 Socket Head Cap Screw (2 each)
13 Handle for Housing (2)
14 Hex Nut for Handle (2)
15 Lifting Eye
16 Tool Box (Not Shown)
AS100 AS105 AS200 AS204 AS210 AS308 AS314 AS404 AS500 AS506
Sr.
No.Description
Model
Type 2Type 1
POWER SPLITTERS
POWER SPLITTER with externally threaded chisel holders;
used in nut splitters with internal threads in the piston rod.
TYPE 1
POWER SPLITTER that have a cylinder with threaded
Bolt holes in the piston rod and chisels holders that use socket
head cap screw.
TYPE 2
Power Splitter Part List :
Versatile : One model cuts a wide range of nut sizes (6-8) Vs. 1-2 of the competition. Hydraulic Cylinders and other common parts among
models reduce inventory (refer parts list below for common parts).
Flexible : Housing is designed to fit virtually any application so you can work from more angles and in tighter spaces.
Power Splitter fits all API and ANSI flanges and all valve bonnets. It cuts virtually any shape nut (Hex, square and 12 point).
Durable : Our heat treatment processes and cryogenic treatment of housings and chisels ensure life second to none. Chisels can be
resharpened after dozens of cuts to prolong life.
Precise : Chisel can be callibrated by using suitable holder to cut the nut wall precisely so that the bolt or stud does not get damaged.
No damage to your equipment and no damage to your Power Splitter.
Power : Power to weight ratio is the best in the industry and it is easier to handle.
Economical : Price is among the most competitive available anywhere in the world.
Warranty : For a full 6 months from defects in materials or workmanship.
Variety of Pumps : Power splitter can be supplied with a variety of hand, foot operated, electric or air powered pumps.
Please contact us for choices of available pumps.
Power Splitter Vs. the competition :
24
MS10K Manual Model
FLANGE SPREADERS
One-Size-Fits-All
Lightweight. Only 7.7 Kg (17 lbs).
Jaws open parallel.
No drift. It stays where you place it.
Easy one person operation.
Universal. One-Size-Fits-All.
4535 Kg (10,000 lbs) applied force at tips.
Opens to 76.2 mm (3 inches).
With the Hydraulic Power-Spreader, HS10K, a hydraulic cylinder replaces the ratchet handle. A standard hand pump powers 1 Power-Spreader,
or a pair, with ease. Again, you are supplied with 4535 kg (10,000 lbs) of force and 76.2 mm (3”) of gap; ample for gasket replacement or
turning of blinds.
Using the manual Power-Spreader, MS10K, simply place the tips between the flange faces and turn the ratcheted handle. The ratcheting
action is transformed into 4535 Kg (10,000 lbs.) Of spreading force and creates up to 76.2 mm (3”) of gap.
HYDRAULIC FLANGE SPREADERS
( All Dimensions in MM )
FS-50 5 39 25 2 x 58 1150mm(45”) 19 - 29 3 - 29 30 - 56
FS-100 10 55 78 2 x 93 1900mm(75”) 32 - 41 3 - 29 30 - 56
Capacity Stroke Oil Capacity Max. FlangeThickness
FlangeDiameter
Stud SizeStandardWedgeModel No.
tonnes 3cm mm(inch)
OptionalWedge
mm mm mmmm mm
A B C D E F G H I JModel No.min max
FS-50 77 210 61 157 10 192 69 131 25 205 18
FS-100 110 290 61 226 30 165 89 180 38 274 31
Hydraulic Flange Spreaders are used for safety opening pipe flanges. Available in capacities of 5 tonnes and 10 tonnes the versatility
of both models enables the user to open flanges up to 92mm thick. Operated with a standard hydraulic hand pump and connecting
hose and supplied in a handy steel storage case, Hydraulic Flange Spreaders can be operated individually, or as
a pair when opening large diameter flanges. With Hydraulic Flange Spreaders it takes minutes open the toughest flanges without
the risks of sparks caused by hammer blows and chisels.
Choose Manual or Hydraulic
HS10K Hydraulic Model
25
B
A
E
H
DGF
JI
C
26
HYDRAULIC VERTICAL LIFTING WEDGE HVW-10
Kit Options :
1 x Hydraulic Vertical Lifting Wedge Assembly
1 x Safety Block
1 x Stepped Block
1 x Instruction Manual
1 x Carry Case
1 x Hydraulic Vertical Lifting Wedge Assembly
1 x 10,000 psi (700 Bar) Two Stage Hydraulic Hand Pump
1 x 10,000 psi (700 Bar) Hydraulic Hose Length 6 feet
1 x Safety Block
1 x Stepped Block
1 x Instruction Manual
1 x Carry Case
Mini Kit Standard Kit
The HVW-10 has been developed as an easy to use / cost effective way to find solutions to heavy lifting where minimal clearance is
available. It will lift objects vertically where an access gap of 3/8”(9.5mm) or more is available. The HVW-10 will lift an object fast, secure and
safe with a lifting force of 16 Tons per tool. Multiple units can be used if greater lifting force is needed.
The Most Practical/Safe Option :
Operating Benefits :Time / Cost Savings
Lowest Weight / Lifting Force Ratio.
Precise
Easy to set up and use.
Safe
Minimal Maintenance
Fast for labour & time savings
Use multiple units for greater lifting
Special Features :Access gap of only 3/8”(9.5mm) needed
3/4”(19.0mm) of vertical lift available from each step
Max. height of 50mm on 4th step
Automatic spring return retraction.
Interlocking first step ensures safe hold.
No Slippage due to locking.
Will lift in a straight vertical place.
Equipment Installation Assisting with Toe Jack Access
Plant Maintenance
Lifting Heavy Machinery Equipment Alignment
The HVW-10 can be used for :
1 x Hydraulic Spreading Wedge Assembly
1 x Safety Block
1 x Instruction Manual
1 x Carry Case
Gross Weight: 8 kg
Mini Kit
Standard Kit
1 x Hydraulic Spreading Wedge Assembly
1 x 10,000 psi (700 Bar) Two Stage Hydraulic Hand Pump
1 x 10,000 psi (700 Bar) Hydraulic Hoses
1 x Safety Block
1 x Instruction Manual
1 x Carry Case
Gross Weight: 17 kg
Stepped Block Accessory
2 x Stepped Blocks
2 x CSK M6 x 12mm
Countersunk Screws
1 x M4 Allen Key
Sold as a separateitem in pairs
Maxi Kit
2 x Hydraulic Spreading Wedge Assembly1 x 10,000 psi (700 Bar)-Two Stage Hydraulic Hand Pump2 x 10,000 psi (700 Bar) Hydraulic Hoses2 x Safety Block1 x Instruction Manual1 x Carry Case1 x 10,000 psi Twin Valve manifoldGross Weight: 28 kg
The Spreading Wedge has been developed as the simple cost-effective solution for flange spreading.
The Practical Solution :
Kit Options :
Special Features :Only requires an access gap of 1/4”(6 mm)
Robust Light weight Tool-Just 7.2 kg(16 lbs)
10,000 psi (700 Bar) generates 14.0 Tons spreading force
Automatic Spring Return
Locking at first step ensures no slippage increased safety.
Operating Benefits :Time / Cost SavingsLowest Weight / Lifting Force Ratio.PreciseEasy to set up and use.SafeMinimal MaintenanceFast for labour & time savingsUse multiple units for greater lifting
HYDRAULIC SPREADING WEDGE HSW-10
The HSW-10 can be used during :
Construction Testing
Routine Maintenance Valve Change-outs
Commissioning Shutdowns / Outages
27
28
BOLT TENSIONERS
Bolt tensioning is now the preferred method of tightening bolts & stud on all critical applications. PST range of bolt tensioners provides
optimum solutions to bolt tensioning requirements.
PST Series, Bol t Tensioners are designed for operation in a wide variety of applications including pipeline flanges, heat exchangers,
pressure vessels, compressor covers, boilers feed pumps, anchors bolts and many others.
Auto Retraction :- For additional ease of use the PST series tensioner can be supplied with auto spring retraction system.
Special Fitting :- Optional fitting like bi-hex nut driver. Special bridges, puller etc can be supplied to customer requirement.
Customized Solutions :- We can supply not only customized fittings but complete tool customized to customer requirement.
Optional Features :
Versatile Design : PST Series standard variable tensioners are designed to provide a wide range of flexibility, covering stud sizes
3/4” to 5.3/4”. Different stud sizes are accommodated by simply changing adaptor kit consisting of Puller, Bridge & Nut Driver,
while utilizing the same Load cell.
High Strength Alloy Steel : The PST Series tensioners operate at a maximum pressure of 1500 Bar & utilizes high strength
AISI 4340 steel parts for long lasting performance.
Stroke Indicator : The PST Series tensioner has an exception stroke of 15 mm. Integral stroke indicator allows piston stroke to be
viewed & measured indication of stroke is provisioned with over stroke limit indication.
Safe Design : The PST series tensioners are designed so that in event of over-stroke the high pressure fluid will be released from
inner side of the load cell & thus saving the operator from exposure.
Multi Tensioning : The PST Series load cell is provisioned with two connections & this acts as manifold for multi tensioning applications.
By using high pressure link hoses any number of bolt tensioners can be connected & tightened simultaneously.
This ensures equal tightening of all bolts in the assy. & reduce the work time.
Anti Roll Seals : Low frictions, anti roll seals & rigid backup rings incorporated for improved life & reliability.
Floating Piston : The unique piston design allows 2º tilt without any loss of load, preventing piston seizure or damage of piston bore.
Standard Features :
NUT DRIVERBRIDGELOAD CELLPULLER
Sub Parts :PST Bolt Tensioner is very simple to use consisting of fours i.e. Puller, Load Cell, Bridge & Nut Driver.
BOLT TENSIONERS SPECIFICATIONS
PST-01 A1-0.12 3/4 38.1 339 3.50 84 46 26 92 156
A1-M20 20 47 26 92 156
A1-0.14 7/8 53 30 100 164
A1-M24 24 54 30 100 164
A1-1.00 1 55 30 100 164
PST-02 A2-M27 27 44.7 397 4.11 98 58 29 104 172
A2-1.02 1.1/8 61 32 104 172
A2-M30 30 64 32 105 177
A2-1.04 1.1/4 69 35 105 180
A2-M33 33 70 35 107 183
A2-1.06 1.3/8 72 36 109 188
A2-M36 36 73 36 109 189
PST-03 A3-1.04 1.1/4 71.8 639 6.60 115 73 37 106 176
A3-M33 33 74 37 108 178
A3-1.06 1.3/8 76 38 110 182
A3-M36 36 77 38 110 183
A3-1.08 1.1/2 84 43 114 191
A3-M39 39 84 43 114 191
PST-04 A4-1.06 1.3/8 81.1 721 7.45 128 79 39 110 183
A4-M36 36 80 39 110 183
A4-1.08 1.1/2 87 43 114 188
A4-M39 39 87 43 114 188
A4-1.10 1.5/8 92 46 116 192
A4-M42 42 92 46 116 193
A4-1.12 1.3/4 97 49 120 200
A4-M45 45 98 49 120 200
PST-05 A5-1.10 1.5/8 105.9 942 9.73 145 95 47 118 193
A5-M42 42 95 47 118 195
A5-1.12 1.3/4 100 50 122 200
A5-M45 45 100 50 122 201
A5-1.14 1.7/8 106 53 125 207
A5-M48 48 106 53 125 207
A5-2.00 2 111 55 128 215
A5-M52 52 112 55 128 215
PST-06 A6-1.14 1.7/8 152.2 1354 13.99 165 107 54 125 205
A6-M48 48 107 54 125 205
A6-2.00 2 112 56 128 210
A6-M52 52 112 56 128 210
A6-M56 56 113 60 132 219
A6-2.04 2.1/4 123 62 134 222
A6-M60 60 126 62 137 229
Technical Details:
ClearanceB
Cell
Model No. Max Load O.D.Min
PitchRelief
CHeight
ABolt Size
2ink N mmAdaptor mm mm mm mm
Hyd Area
mminch Ton
TPI CHB
A
C
29
30
BOLT TENSIONERS SPECIFICATIONS
Bolt Load = Bolt Stress x Area of Stud.
= (Bolt Stretch x Modulus of Elasticity x Area of Stud) Effective Length.
Hydraulic Pressure = (Bolt Load x Relaxation Factor) Load Cell Area.
ClearanceB
Cell
Model No. Max Load O.D.Min
PitchRelief
CHeight
ABolt Size
2ink N mmAdaptor mm mm mm mm
Hyd Area
mminch Ton
PST-07 A7-M56 56 178.3 1587 17.06 180 119 58 135 221
A7-2.04 2.1/4 122 61 137 225
A7-M60 60 125 61 140 230
A7-2.08 2.1/2 133 66 143 237
A7-M64 64 133 66 143 237
A7-M68 68 137 67 148 247
A7-2.12 2.3/4 142 69 151 253
A7-M72 72 143 69 151 255
PST-08 A8-M68 68 222.4 1978 20.4 198 140 70 148 244
A8-2.12 2.3/4 140 72 151 249
A8-M72 72 141 72 151 251
A8-M76 76 146 77 154 260
A8-3.00 3 150 77 154 260
PST-09 A9-2.12 2.3/4 277.9 2473 22.5 215 144 72 153 254
A9-M72 72 144 72 153 254
A9-M76 76 152 77 156 261
A9-3.00 3 155 77 156 267
A9-M80 80 160 85 161 272
A9-M85 85 163 85 161 275
A9-3.04 3.1/4 166 85 161 275
PST-10 A10-M80 80 342.5 3047 31.5 244 162 87 165 271
A10-3.04 3.1/4 165 87 165 274
A10-M85 85 170 89 170 280
A10-3.08 3.1/2 175 91 174 284
A10-M90 90 178 91 174 285
A10-M95 95 178 95 180 296
A10-3.12 3.3/4 184 95 180 296
A10-M100 100 185 99 185 307
A10-4.00 4 189 99 185 307
PST-11 A11-3.12 3.3/4 423.5 3768 38.9 280 185 96 183 298
A11-M100 100 186 100 188 303
A11-4.00 4 190 100 188 305
A11-4.04 4.1/4 199 105 197 320
A11-M110 110 199 105 197 321
A11-4.08 4.1/2 218 117 202 332
A11-M120 120 218 118 209 344
A11-4.12 4.3/4 227 118 209 346
A11-M125 125 227 121 213 354
PST-12 A12-M125 125 534.4 4754 49.1 325 225 123 215 362
A12-5.00 5 232 123 215 367
A12-M130 130 232 126 218 370
A12-5.04 5.1/4 254 126 221 373
A12-5.08 5.1/2 254 135 227 387
A12-M140 140 254 135 228 388
A12-5.3/4 5.3/4 255 138 229 397
A12-M150 150 265 141 232 404
Sub Sea Bolt Tensioners are made in variable construction with divided puller technology for ease of operation. All Bolt Tensioners have
30mm maximum piston stroke & stroke indicator. Compact tool design allows easier access into restricted application and low head
clearances. It’s Floating piston design allows tilt in any direction without loss of load, thus eliminating piston seizure and aiding tool retraction.
Integral manifold design simplifies hose connection eliminating complicated tee-block arrangements. Although rated capacity is of 100 Mpa
for most of typical application requirement will be below 60 Mpa.
SUB SEA VARIABLE BOLT TENSIONERS
LoadCell No.
Max load14500 psiAdaptor
Kit No.A B D
inch2(mm ) mm mm mm mm
PSS Series Technical Details :
PSS - 01 3/4” P1 - 0.12 1118.6 1.73 111.8 68 35 60 217
M20 P1 - M20
7/8” P1 - 0.14
PSS - 02 M24 P2 - M24 1884 2.92 188.4 84 50 75 289
1” P2 - 16.00
M27 P2 - M27
1.1/8” P2 - 1.02
M30 P2 - M30
PSS - 03 1.1/4 P3 - 1.04 2649.4 4.11 264.9 96 58 95 307
M33 P3 - M33
1.3/8” P3 - 1.06
M36 P3 - M36
PSS - 04 1.1/2” P4 - 1.08 3768 5.84 376.7 113 63 96 319
M39 P4 - M39
1.5/8” P4 - 1.10
M42 P4 - M42
PSS - 06 1.3/4” P6 - 1.12 5966 9.25 596.4 136 70 114 342
M45 P6 - M45
1.7/8” P6 - 1.14
M48 P6 - M48
2” P6 - 2.00
M52 P6 - M52
PSS - 08 M56 P8 - M56 9714.4 15.06 971.2 162 82 138 367
2.1/4” P8 - 2.04
M60 P8 - M60
2.1/2” P8 - 2.08
M64 P8 - M64
PSS - 10 M68 P10 - M68 13521.6 20.96 1351.8 190 95 157 400
2.3/4” P10 - 2.12
M72 P10 - M72
M76 P10 - M76
3” P10 - 3.00
PSS - 11 M80 P11 - M80 16485 25.55 1648.10 212 109 190 412
3.1/4” P11 - 3.04
M85 P11 - M85
3.1/2” P11 - 3.08
M90 P11 - M90
BoltSize
Tool Hyd. Area C
C
D
A
B
31
BOLT TENSIONER PUMPS & ACCESSORIES
A choice of manual or air driven hydraulic pump units both compatible for use with standard PST stud bolt tensioners is available.
Both models are easy to operate and are supplied complete with a calibrated pressure gauge and quick release outlet coupling.
The air driven PUAH1500 model also incorporates an integral inlet air filter regulator & lubricator.
PU-AH-1500 1500 bar (21750 psi) Air/Hydraulic Pump 0.7 HNCP-002 610 170 180 7.00
PU-HP-1500 1500 bar Hand Pump c/w 200 bar gauge 2.0 HNCP-002 450 390 390 22.0
Model No. DescriptionOutlet
CouplerLength Dimensions Height Net
Weight
(Liters) mm Kg.
Usable OilCapacity
mm mm
Ultra-high pressure hoses are compatible for use with all bolt tensioning products up to a maximum of 1500 bar working pressure.
Each hose is supplied complete with quick connect coupling and has a safety factor of 3:1 on maximum working pressure.
Four standard length are available with special lengths available on request. Spare coupling, nipples and washers are
also available.
Part No. WeightDescription
HNCP001 Std Male Snap Coupler 0.05
HNCP002 Std Female Snap Coupler 0.2
HNCP011 Nipple Extension Adaptor 0.05
Hose-22000 psi (c/w female couplers each end)
PU-HG150 1.5 meter Hose 1.1
PU-HG300 3 meter Hose 2.5
PU-HG500 5 meter Hose 4.5
WeightDescriptionPart No.
HNCP002 HNCP011
PU-HG500
PU-HP-1500PU-AH-1500
32
SPRING BALANCERS
We have introduced several safety features into the new designed Spring Balancer which has made it user friendly & eliminating
chances of Industrial accident. Large batch production has been introduced through new Pressure Dies which has made the product
look better and has reduced the Delivery Time. Product is in use in over 85 countries with the largest automobile manufactures.
Capacity Capacity
9.0 - 15.0 SWA - 15 1.3 5.5 9.0 - 15.0 SWA - 15 L 2.3 10.0
15.0 - 22.0 SWA - 22 1.5 9.5 15.0 - 22.0 SWA - 22 L 2.3 10.0
22.0 - 30.0 SWA - 30 1.5 10.0 22.0 - 30.0 SWA - 30 L 2.3 11.0
30.0 - 40.0 SWA - 40 1.5 12.5 30.0 - 40.0 SWA - 40 L 2.3 14.5
40.0 - 50.0 SWA - 50 1.5 13.0 40.0 - 50.0 SWA - 50 L 2.3 15.0
50.0 - 60.0 SWA - 60 1.5 13.5 50.0 - 60.0 SWA - 60 L 2.3 16.0
60.0 - 70.0 SWA - 70 1.5 14.0 60.0 - 70.0 SWA - 70 L 2.3 16.5
kgmeter
WeightTravelModel
No. kgmeter
WeightTravel Model
No.kg kg
SWA SeriesThese balancers are provisioned with WIRE ARREST MECHANISM, which locks the drum pulley in case of Bottom Hook failure or
accidental tool disengagement.
CLOSED BODY & COVER : Prevents industrial accident by preventing ingress of fingers inside the assembly.
BODY LINER : To prevent the wear of body by wire rope. Increases life of the balancer.
VERTICAL AXIS SPRING ADJUSTMENT : This will facilitate adjustment of spring tension from ground level.
CONTAINERISED SPRING ASSEMBLY : Concealed containers are easy in handling during maintenance and replacement of
springs.
WIRE ROPE REPLACEMENT WITHOUT DISMANTLING : A slot on balancer facilitates removal & installation of wire rope without
disassembly of balancer. This facility is not available for long range balancer.
PRESSURE DIE CASTING : Parts are manufactured through pressure die hence there is consistency in surface finish & total
interchangeability of spares. Facilitates large batch production hence reduced delivery period.
SAFETY LOCK PIN : Locks drum pulley in the event of spring failure and thus prevents the fall of costly equipment & injury to the operator
from falling load.
FORGED TOP HOOK : Permits 360 degree swivel of balancer.
Features in Spring Balancer
33
SPRING BALANCERS
Capacity Capacity
kgmeter
WeightTravelModel
No. kgmeter
WeightTravel Model
No.kg kg
0.5 - 1.5 SWF - 01 1.0 1.0 - - - -
1.0 - 2.0 SWF - 02 1.0 1.0 - - - -
1.5 - 3.0 SWF - 03 1.3 1.8 1.5 - 3.0 SWF - 03 L 2.5 0.75
3.0 - 5.0 SWF - 05 1.3 1.9 3.0 - 5.0 SWF - 05 L 2.5 0.85
4.5 - 9.0 SWF - 09 1.3 4.0 4.5 - 9.0 SWF - 09 L 2.3 8.00
9.0 - 15.0 SWF - 15 1.3 4.0 9.0 - 15.0 SWF - 15 L 2.3 8.00
15.0 - 22.0 SWF - 22 1.5 8.0 15.0 - 22.0 SWF - 22 L 2.3 8.50
22.0 - 30.0 SWF - 30 1.5 9.0 22.0 - 30.0 SWF - 30 L 2.3 9.50
30.0 - 40.0 SWF - 40 1.5 10.5 30.0 - 40.0 SWF - 40 L 2.3 11.00
40.0 - 50.0 SWF - 50 1.5 11.0 40.0 - 50.0 SWF - 50 L 2.3 12.00
50.0 - 60.0 SWF - 60 1.5 12.0 50.0 - 60.0 SWF - 60 L 2.3 13.00
60.0 - 70.0 SWF - 70 1.5 12.5 60.0 - 70.0 SWF - 70 L 2.3 13.50
70.0 - 85.0 SWF - 85 1.5 13.0 70.0 - 85.0 SWF - 85 L 2.3 18.00
85.0 - 100.0 SWF - 100 1.5 13.5 85.0 - 100.0 SWF - 100 L 2.5 19.00
100.0 - 120.0 SWF - 120 1.5 29.0 100.0 - 120.0 SWF - 120 L 2.5 29.00
120.0 - 140.0 SWF - 140 1.5 31.0 120.0 - 130.0 SWF - 130 L 2.5 31.00
140.0 - 170.0 SWF - 170 1.5 35.0 - - - -
170.0 - 200.0 SWF - 200 1.5 36.0 - - - -
SWF series balancers are now fully enclosed & are provisioned with a body liner to prevent damage to body.
SWF Series
New introduction to meet the long standing requirement of HEAVY WEIGHT balancers both in Standard range & Long range.
SBH Series
Capacity
200 - 225 SBH - 225 1.5 48.0
225 - 250 SBH - 250 1.5 50.0
250 - 275 SBH - 275 1.5 52.0
275 - 300 SBH - 300 1.5 56.0
85 - 100 SBH - 100 3.0 32.0
100 - 120 SBH - 120 3.0 42.0
120 - 140 SBH - 140 3.0 45.0
140 - 160 SBH - 160 3.0 48.0
Model
No. kgmeter
WeightTravel
kg
34
Unique Mechanism for continuos torque increase with two solid ring hammers.
It delivers an instantaneous, balanced blow.
More powerful than any other mechanism on the market.
Thin Hammer
Heavy Duty for toughest applications.
Highest torque output to weight ratio in industry.
Available Twin Hammer or Pin Clutch Mechanisms for maximum versatility.
Minimum Noise and Vibration.
Available in 3/4”, 1” and 1.1/2” square drives.
Uses standard air supply.
Features / Benefits :
Two Pin Clutch hammers strike the anvil, provides high torque, low vibration
and fast run downs.
This mechanism delivers higher performance and extended durability.
Pin Clutch - (DYNA PACT CLUTCH)
Good connection of Pin & Hammer produces excellent stability and durability.
It generates in creditable high torque and low vibration.
Pin Hammer
HEAVY DUTY INDUSTRIAL IMPACT WRENCHES
Bolt Capacity 27 mm (1.1/8”) 48 76
Square Drive Size 3/4” 1” 1.1/2”
Max. Torque 1018 Nm (750 ft.lb) 2712 Nm (2000 ft.lb) 4068 Nm (3000 ft.lb)
Air Inlet 1/4’ 3/8” 1/2”
Hose Size (mm) 10 13 19
Sound Level (dBA) 95 95 95
2Vibration (m/s ) 3/4 5.5 11.0
Air Pressure Needed 90 psi (6 bar) 90 psi (6 bar) 90 psi (6 bar)
Net Weight (kg) 4.8 10.8 16.9
mm (1.7/8”) mm (3”)
Model No. TIW - 76TIW - 27 TIW - 48
Mechanisms
TIW - 48 TIW - 76TIW - 27
35
229, Pragati Industrial Estate, 316, N. M. Joshi Marg, Bombay - 400 011. INDIA.Phone: +91.22.2300 0015 Fax: +91.22.2307 3761
Website: www.powermaster.in email: sales@powermaster.in
POWERMASTER ENGINEERS PVT. LTD.
t ubeex pande rs . c om t ubec l eane rs . c om i m pac t s oc k e t . c om s p r i ngba l anc e rs . c o m BT
/10
08
5
top related