bmw s1000rr ’20 belly cover fitting diagram€¦ · bmw s1000rr ’20 belly cover fitting diagram...
Post on 12-Sep-2020
3 Views
Preview:
TRANSCRIPT
All brackets are made to be adjustable so that they may fit our range of different exhausts available for this motor-cycle. Please note all panels should have an air gap between the stock bodywork and exhaust. Make sure to use
appropriate thread locking compound on all fasteners to avoid them coming loose with vibration.
Left Side - Stock Bolt
BMW S1000RR ’20 Belly Cover Fitting Diagram
OEM BMW removed parts, re-used for fitting:
2x BMW Stock Bolts
Austin Racing parts used for fitting:1x Right Hand Side Carbon Cover1x Left Hand Side Carbon Cover4x Stainless Steel Brackets5x M5 Panel Clips5x M5 x 16mm Bolts1x M8 x 16mm with washers
FrontM5 x 16mm
M5 x 16mm
M5 x 16mm X2
M5 x 16mm
Right Side - Stock Bolt
Underneath, Rear - M8 x 16mm
top related