bending pvc with a pvc bending jig
Post on 23-Feb-2017
122 Views
Preview:
TRANSCRIPT
BENDING PVC WITH A PVC
BENDING JIGEIM G-10
ZALDY M. SADEZ
CAUTION: BE SURE TO PERFORM THESE STEPS OUTDOORS, OR USE A RESPIRATOR. ALSO, BE SURE TO KEEP A GOOD HOLD ON THE PVC UNTIL IT HAS COOLED TO AVOID IT SPRINGING BACK AND CAUSING INJURY.
PVC JIG BENDING STEPS
METHOD #2• INSTEAD OF SAND, YOU CAN INSERT A SPRING, SUCH
AS THE PIPE VIPER. FOR LARGE DIAMETER PIPE, I INSERT A USED GARAGE DOOR SPRING. I ACQUIRED A COUPLE OF THEM FREE THAT WERE DISCARDED BY A GARAGE DOOR SUPPLIER.
• FOLLOW THE DIRECTIONS ABOVE.
•TIP: ATTACH A WIRE, OR SMALL CHAIN, AT ONE OF THE SPRING TO AID IN REMOVAL AFTER THE PIPE COOLS.
top related