auction sale to be held on the site...premier fasteners stock $2.5m at cost & warehouse...
Post on 10-Aug-2020
2 Views
Preview:
TRANSCRIPT
Premier FastenersStock $2.5M at Cost & Warehouse Equipment
3 Ladbroke St, Milperra NSW
AUCTION SALE TO BE HELD ON THE SITE
3 Ladbroke St, Milperra NSW
Tuesday 3rd March, 10:00am AEDT
AUCTION CATALOGUE
UNDER INSTRUCTIONS FROM:
HAMMER PRICE IS GST EXCLUSIVE
SOME LOTS MAY BE SUBJECT TO REDEMPTION
ENQUIRIES: PATRICK SYMONS 0416 151 506
ALL LOTS MUST BE REMOVED WITHIN 4 DAYS FROM THE CONCLUSION OF THE AUCTION
$100 CASH DEPOSIT REQUIRED ON REGISTRATION IF YOU DO NOT PRESENT A CREDIT CARD
COMPANY LOGO
NOTES: A BUYERS PREMIUM OF 13.5% + GST WILL APPLY TO ALL LOTS SOLD
IN THE MATTER OF: PREMIER FASTENERS PTY LTD (IN LIQUIDATION)
EVERYTHING MUST BE SOLD!
INSPECTION: 8:30AM - 5:00PM AEDT FRIDAY 28TH FEBRUARY 2020, AND DAY OF SALE FROM 8:00AM
Auction 1; Monday 2nd March from 10am AEDT (Manufacturing Machines)
Auction 2; Tuesday 3rd March from 10am AEDT (Stock $2.5M at Cost & Warehouse Equip)
1
TERMS AND CONDITIONS OF SALE
1 The purchaser acknowledges that all sales conducted by the auctioneer are on the basis of being “GST” exclusive, and as such a GST amount of 10% (or whatever prescribed amount is in force by legislation) will be added to the bid price. Further, the purchaser acknowledges and agrees that in the absence of advice to the contrary, that all bids by the purchaser will be deemed to be exclusive of GST and that GST will be added to the bid price of all lots.
2 The purchaser acknowledges that all sales conducted by the auctioneer, that a buyer’s
premium may be charged on the bid price. 3 As soon as practicable after the fall of the hammer the Purchaser shall sign the
agreement (if any) for sale. 4 The Purchaser shall be deemed to purchase as principal unless prior to the sale –
a) The purchaser shall have disclosed to the Auctioneer that he will be bidding on behalf of a principal and shall supply the full name and address of his principal; and
b) The purchaser has given to the auctioneer a copy of written authority to bid for or on behalf of a person.
5 The Auctioneer and Vendor reserve the following rights which may be exercised by the
Auctioneer without giving any reason therefore –
a) to withdraw any lots from the sale;
b) not to offer for sale part only of any lot described in the catalogue;
c) to offer two (2) or more of the lots described in the catalogue as separate lots for sale together as one (1) lot;
d) should such lots referred to in c) of this condition not be knocked down under the hammer to a successful bidder, to offer such lots as separate lots;
e) to refuse to accept a bid or bids from any person or persons which in the opinion of the Auctioneer is not in the best interest of the Vendor;
f) to refuse admission to/or eject from the selling place any person or persons;
g) to refuse to accept any bid for a lot being less than a sum nominated from time to time by the Auctioneer;
h) to keep secret the existence and amount of the reserve price (if any) of a lot prior to the close of bidding or withdrawal from sale of the lot;
i) in the event that the Purchaser shall successfully bid for more than one lot at the auction;
2
j) to appropriate any moneys received from that Purchaser in satisfaction or partial
satisfaction of the purchase price (and any taxes, if applicable) due in respect of any one or more of such lots to the total of partial exclusion of amounts due in respect of any other such lot or lots as the Auctioneer shall see fit;
k) to elect at any time to treat each contract for the sale of each such lot as interdependent with each other such contract or contracts and default under any such contract shall be treated as default under all such contracts;
l) to bid on behalf of any vendor, prospective Purchaser or Purchaser’s with or without disclosure; and
m) in the event that any lot is not sold at the auction to offer to sell same thereafter by private treaty but otherwise subject to these conditions.
6 The Vendor or any person on his behalf reserves the right to bid at the auction in respect
to any lot. The Vendor acknowledges that for any successful bids he/she shall still be liable for the payment of any relevant commissions.
7 Any bidder shall give his full name and residential address at the time of registering to
bid or when called upon to do so by the Auctioneer and –
a) Prior to the end of the auction or at any time thereafter specified by the Auctioneer the Purchaser shall pay to Auctioneer the full price for the lot, plus any GST, license fee or any other government charge applicable to the goods.
b) The Auctioneer at his discretion may require immediate payment or part payment for a lot.
c) The purchase price and, where applicable, any part payment thereof, and GST shall be paid in either cash, bank cheque, credit card or bank transfer
d) Any balance of the purchase price for a lot shall be paid to the Auctioneer no later than the expiration of the period during which the Purchaser is required by the conditions to take delivery of the lot and he shall not be entitled to require delivery until the purchase price and, where applicable, GST, license fee or government charge shall have been paid in full; and
e) Time shall be of the essence in relation to the interpretation and observance of these conditions.
8 On the fall of the hammer, the Auctioneer may require and the Purchaser shall pay a
deposit in cash of twenty five percent (25%) in part payment of the purchase price for the lots purchased by the Purchaser. In default, the lot or lots so purchased may at the absolute discretion of the Auctioneer be immediately re-offered for sale and re-sold.
3
9 No error in description or deficiency in quantity shall void the sale and the Purchaser
shall be bound to take the delivery of the lot without any allowance or abatement in price. Any warranties which might otherwise be implied by the Sale of Goods Act, 1923, are hereby excluded and shall not apply. The Auctioneer and the Vendor make no warranties other than those implied by Common Law or by statute the exclusion of which warranty would render this condition void or voidable or which would constitute an offence by the auctioneer or the Vendor. Intending bidders must satisfy themselves by inspection or otherwise as to the nature of the lot or lots offered for sale and must accept same with all fault, patent or latent (if any). Furthermore, no warranty shall be implied from any affirmation made at the auction or otherwise but in all cases where an express warranty is intended, the same shall only be enforceable of reduced to writing and signed by the Vendor or by the Auctioneer as agent for the Vendor.
10 At the absolute discretion of the auctioneer, he may accept payment by way of personal
or company cheque. Should the above occur title does not pass and delivery will not occur until any cheque received in payment has been honoured and paid.
11 Each lot shall lie at the purchaser’s risk from the fall of the hammer and neither the
auctioneer nor the Vendor shall be accountable for any deficiency, damage or loss which may arise thereafter. The property in such lot shall not pass until payment in the approved manner as advertised at the auction in full of the purchase price and, where applicable, GST, license fee or government charges.
12 No lot shall be removed during the sale without the consent of the auctioneer, but
subject to condition 10 hereof, delivery is to be taken and the lot removed by the Purchaser within one (1) full working day of the day of the auction or such other period of time as may be specified by the Auctioneer at the time of sale and, in this respect, time is of the essence. Any removal shall be at the expense and risk of the Purchaser but, in such removal, the Purchaser shall do no damage, or shall forthwith make good any damage, which may be occasioned. Any lot or part thereof which the Purchaser does not remove may thereafter be removed by the Auctioneer or by some person, firm or company engaged by the Auctioneer or the Vendor and/or stored at the place at which the auction took place or elsewhere by the Auctioneer or by some person, firm or company engaged by the Auctioneer. Such removal and/or storage shall be deemed to have been made by the Auctioneer at the request of the Purchaser and all costs incurred by the Auctioneer or the Vendor in relation thereto together with an amount of $10.00 plus GST per lot per day (inc. weekends) penalty shall be immediately payable by the Purchaser to the Auctioneer and the Auctioneer may sue for and recover the same as liquidated damages.
13 In addition to the purchase price, the Purchaser shall pay to the Auctioneer a fee calculated at the rate of up to thirteen and a half per cent (13.5%) of the full purchase price excluding GST State or Federal taxes that may be applicable.
4
14 If the Purchaser shall default in the observance or performance of his obligation under
these conditions or any one or more of the then any moneys which the Purchaser shall have paid to the Auctioneer shall be absolutely forfeited and, without notice to the Purchaser, such lot or lots may be re-sold either by public auction or private contract and upon such terms and conditions as either the Auctioneer or the Vendor shall deem fit at the risk and expense of the Purchaser who shall be liable for any deficiency together with all expenses of removal, commission, warehousing and other charges arising out of such default and the Auctioneer or the Vendor shall be entitled to recover same as and for liquidated damages. Without limiting the generality of the foregoing, the Auctioneer shall be entitled to recover from the purchaser -
a) the amount of any commission upon the purchase which the Purchaser did not
complete, the commission being determined by the agreement between the parties;
b) such sum for expenses and charges incurred by the Auctioneer in connection with or incidental to the auction and in respect of any such re-sale; and
c) where applicable, any GST, value added tax or any other tax relating to or arising from the sale of the property or any part thereof of the Vendor.
15 Furthermore, the purchaser shall take or cause to be taken all reasonable and proper
steps so far as is reasonably practicable in order to ensure that, the lot or lots purchased shall be safe and without risks to health when properly used.
16 In these Conditions the word “Auctioneer” means Hymans Asset Management Pty
Limited or any member of the Hymans Group (as determined by the originating office) except that where the context so permits it shall include the persons actually conducting the auction on behalf of Hymans Asset Management Pty Limited.
17 In these Terms and Conditions the word “Purchaser” refers to the registered bidder.
NOTES FOR REGISTERED BIDDERS
The following notes for registered bidders are supplementary to the above noted Terms and Conditions of Sale and are only intended to assist bidders in properly and conveniently affecting their purchases. Special Notes - A buyer’s premium of 13.5% + GST will apply on all lots sold. The hammer price of all lots is GST exclusive and as such, GST of 10%
will be added to the bid price and buyer’s premium. Example: Bid Price: $100.00 Plus Buyer’s Premium: $ 13.50 Sub-total: $113.50 Plus GST: $ 11.35 Invoice Total: $124.85
5
Site Management - The site Manager and contact details for this auction is: Angus McLennan 0405 342 340 or William Pattinson 0407 109 340 Registration - Buyers must register prior to bidding and obtain a bidder card from the
auctioneer’s clerk immediately upon entry to the auction premises. Deposits - A deposit of $100.00 is required at registration if you do not present with
a Visa or MasterCard. The deposit will be immediately refunded in full if no lots are purchased by the buyer.
If a buyer makes substantial purchases (to be determined by the
auctioneer) a deposit of between 10% and 20% will be required prior to the conclusion of the auction.
Payment Options - Payment of invoices is required in either cash, bank cheque, Visa,
MasterCard, Bankcard or EFTPOS only. Please note that a 1.12% surcharge will be applied to all credit card payments.
Company and personal cheques will be NOT accepted unless
arranged prior to the auction with the auctioneers. Direct deposit to the auctioneer’s trust account is also available. Account
details are as follows: Bank: ANZ
Account Name: Hymans Asset Management – Trust Account
BSB: 012 003
Account Number: 837 774 833 Company Cheques - A letter of reference must be obtained PRIOR TO THE AUCTION from
your bank as a general reference in respect to your credit worthiness. This reference need not be in specific terms but must state that in the normal course of business you have not been known to extend your accommodation. Failing to supply this reference will lead us to insist in payment in one of the other manners mentioned above.
Insurance - The bidder is at risk on the fall of the hammer on each lot and is therefore
strongly advised to effect insurance immediately. Neither the auctioneer nor the vendor will be held responsible for any loss or damage to any lot after the fall of the hammer and buyers should be aware of the other terms affecting the sale that may preclude them from taking delivery of their lots immediately upon the fall of the hammer.
Transfer of Title - Title shall only pass at such time that accounts are fully paid.
6
Collection of Lots - Full payment must be made before any goods will be released.
Removal of goods will occur at the following times: From the conclusion of the auction sale to 5:00pm
Wednesday 4th March 8:30am to 5:00pm
Thursday 5th March 8:30am to 5:00pm
Friday 6th March 8:30am to 4:00pm
Monday 9th March 8:30am to 5:00pm
Tuesday 10th March 8:30am to 5:00pm
Wednesday 11th March 8:30am to 5:00pm
Thursday 12th March 8:30am to 5:00pm
Friday 13th March 8:30am to 4:00pm
Equipment that requires disconnection from water, electricity, gas or other such services is at the expense of the purchaser and disconnection work must be carried out by a GOLD LICENCE trade person. The licence must be presented prior to the commencement of works. Disconnection must be completed carefully and left in a neat manner. All removal work will be inspected to ensure it complies with the above. If we are not satisfied with the removal work, we reserve the right to request further work be carried out or undertake rectification work ourselves which will be charged to the Purchaser. Please note there will be a single forklift available for use until 4pm Friday 13th March 2020.
Payment will only be accepted from and delivery given to the Purchaser
of the lots at the auction sale. Any transfer of lots between buyers can only occur after the lots have been removed from the site by the Purchaser at the auction sale.
Absentee Bids - Absentee bids may be left with the auctioneer’s clerk by way of the
Absentee’s Bidding Form which is attached herein or can be obtained from the auctioneer’s clerk.
First Right of Refusal - During the sale, we may offer the highest bidder “first right of refusal”
over similar lots. For example, if there are ten identical units, the highest bidder on the first unit may choose to take one or all ten at the initial hammer price. Live simulcast bidders – watch the chat box to find out more. If the highest bidder chooses to take multiple lots, they will be sold to the highest bidder and will not be offered individually.
Mixed Lots - Any buyer who purchases a mixed lot, a scrap lot, an “allowance for
items”, or “contents”, is responsible for the removal of all items within
7
the scope of that lot. Any remaining items left onsite will be disposed of at the expense of the buyer.
8
RISK KEY CODE
Purchasers are required to carefully assess all possible risks associated with the operation of the asset in line with but not limited to, the following schedule of identifiable hazards:
Risk Code
Hazard Advice / Action Required
0 No Apparent Hazards
• Should only be used as per manufacturers specifications
1 Manuals & Service History
• There are no manuals or instructions available
• There is no service history or maintenance records
2 Electrical Items
• Requires testing prior to use
• All leads and adaptors should be tested by an accredited tester or electrician for faults and tagged in accordance with AS/NZS 3760 and AS/NZS 3000
• Power must be isolated during cleaning or servicing
• Must only be used with an earth leakage circuit breaker
3 Safety Apparel
• Ear protection must be worn during operation; and/or
• Face protection must be worn during operation; and/or
• Eye protection must be worn during operation; and/or
• Hand protection must be worn during operation; and/or
• Foot protection must be worn during operation; and/or
4 Clothing
• Appropriate clothing must be worn by the operator
• Loose fitting clothing must not be worn
5 Safety Guards
• Safety guards are fitted which must not be removed as detailed in
AS 4024
9
Risk Code Hazard Advice / Action Required
6 Safety Guards
• Safety guards are missing
• Should not be operated until safety guards which meet with the manufacturers standards are fitted
7 Manual Handling
• Care must be taken when lifting heavy items
• Item containing glass or other fragile components must be carefully transported
• Be careful when removing items attached to walls in case they fall
• Secure all moving and removable parts prior to transporting items
8 Damaged Items
• Item is damaged as will be offered for sale as scrap only
9 Noise
• Must have the sound pressure level tested prior to commissioning and if over 85db(A) or if the impact noise is greater than 140db(A), then signage warning the users to wear hearing protection must be attached
10 Fire Fighting Equipment
• An accredited contractor must inspect and allocate a date tag in accordance with AS 1851-2005 Sect. 15 & 16 (6 monthly) and assess to AS 4655 (annually)
• Fire extinguishers - Clearly visible signs of both the fire extinguisher icon and fire extinguisher type must be installed above the fire extinguisher in accordance with AS 2444
• All fire extinguishers must be mounted not less than 100mm from the ground and not higher than 1200mm for the floor as detailed in AS 2444
• Once installed, all fire extinguishers should made easily accessible and cleared of any obstacles
• Staff must be trained to use fire protection equipment in accordance with AS3745 and OH & S Chapter 4
11 Paper Shredders
• The operator must not place hands close to shredding blades
10
Risk Code Hazard Advice / Action Required
12 First Aid and Safety Equipment
• All contents to first aid kits / boxes / cabinets must be carefully checked and any expired stock must be disposed
• Once installed, a clearly visible sign of the first aid icon (green cross) must be installed above the first aid station
• All safety apparatus should be tested for relevant compliance prior to use or installation.
13 Decommission & Removal
• Requires a licensed tradesman or technician for decommissioning
and re-installation
14 Calibrated Equipment
• Must be re-calibrated by a certified contractor prior to use
15 Contaminates
• Must be carefully checked and cleaned of contaminates from prior
use
16 Equipment Under Pressure
• Must be certified by an accredited contractor in accordance with
AS/NZS 3788 (bi-annually) and once relocated and installed, a certificate of currency must be displayed nearby
17 Forklifts & Attachments
• Where applicable, the operator must have a certificate of competency as per WorkCover regulations
• If ride-on, must be fitted with roll over protection
• If to be used on roads or public traffic areas, must be registered (NSW Conditional)
• Only attachments designed to be used with this model of forklift should be used
• The advised safe working load of all lifting attachments must not be exceeded
18 Pneumatic Tools
• Must be carefully inspected prior to deployment
11
Risk Code Hazard Advice / Action Required
19 Lifting Equipment
• Must be used only in line with manufacturers specifications
• The advised safe working loads must not be exceeded
20 Hydraulic Tools
• Must be carefully inspected prior to deployment
21 Gas Cylinders
• Must be adequately secured - by chain and/or with warning signage
• Must have a valid date stamp
• Must not be transported in an enclosed vehicle
22 Explosives
• Fastening charges must only be used as detailed in the Dangerous
Goods Act 1975
23 Equipment Used at Heights
• Must be only be used in accordance with the manufacturers
specifications
24 Dangerous Goods
• If classified as such under the NSW Dangerous Goods Act,
Australian Dangerous Goods Code must be stored in accordance with that Act and Code
25 Ventilation & Extraction
• Adequate equipment must be used with this item
• This item must only be used in an area with adequate ventilation
26 Registration
• All mobile plant if to be used on roads or public traffic areas, must be appropriately registered
• All mobile plant must be roadworthy in addition to the above i.e. all warning lights and signals must be working
12
Risk Code
Hazard Advice / Action Required
27 Professional Competency
• Must only be utilized by a skilled operator
28 Machinery Space
• Plant must have adequate work space surrounding it when
commissioned to allow for loading and unloading of work pieces and materials and the safe working space for operators
29 Conveyors
• Must comply with AS 1755 regarding design, construction,
installation and operations
30 Pipelines & Ducts
• Signs indicating the contents of pipelines must be installed in
accordance with AS 1345
31 Licensing
• Only appropriately licensed personnel must operate
LOT QTY DESCRIPTIONRISK
CODE
1 100,000 Screws - M8 x 22 IND HEX SEMS ASS 8.8RF 7
2 96,000 Screws - M8 x 22 IND HEX SEMS ASS 8.8RF 7
3 96,000 Screws - M8 x 26 IND HEX SEMS ASS 8.8RF 211 TL 7
4 50,000 Screws - M8 x 26 IND HEX SEMS ASS 8.8RF 211 TL 7
5 57,000 Screws - M8 x 26 IND HEX SEMS ASS 8.8RF 211 TL 7
6 51,000 Screws - M8 x 26 IND HEX SEMS ASS 8.8RF 211 TL 7
7 96,000 Screws - CSK NO.2 POZI HEAD CHIPBOARD SCREWS 7
8 42,000 Screws - M8 x 26 IND HEX SEMS ASS 8.8RF 211 TL 7
9 288,000 Screws - CSK NO.2 POZI HEAD CHIPBOARD SCREWS 7
10 60,000 Screws - M8 x 22 IND HEX SEMS ASS 8.8RF 211 TL 7
11 10,000 REMOVED LOT 0
12 42,000 Screws - M8 x 26 IND HEX SEMS ASS 8.8RF 211 TL 7
13 73,500 Washers - 12 X 50MM IND HEX WASHER T/17 ZY FULL THREAD 7
14 66,000 Washers - 13 X 50MM IND HEX WASHER T/17 ZY FULL THREAD 7
15 66,000 Washers - 14 X 50MM IND HEX WASHER T/17 ZY FULL THREAD 7
16 66,000 Washers - 15 X 50MM IND HEX WASHER T/17 ZY FULL THREAD 7
17 66,000 Screws - CSK NO.2 POZI DRIVE HEAD SELF TAPPING SCREWS 7
18 6,400 Screws - CSK NO.2 POZI DRIVE HEAD SELF TAPPING SCREWS 7
19 12,000 Screws - M8 X 45 8.8 STARDR SPEC SCR TOYOTA SPEC 7
20 324,000 Washers - M6 X 16 X 1.6 7
21 6,400 Bolts - M16 X 55 T BOLT ASSEMBLIES ZP 7
22 6,400 Bolts - M16 X 55 T BOLT ASSEMBLIES ZP 7
23 162,000 Rivets - 73AS4-3 RIVET (HOBSON) 7
24 162,000 Rivets - 73AS4-3 RIVET (HOBSON) 7
25 36,000 Washers - M15 X 45 X 2.6 7
26 10,800 Bolts - HEX SET BOLT - M14 x 30 7
27 10,800 Bolts - HEX SET BOLT - M14 x 30 7
Folio 2 of 32
LOT QTY DESCRIPTIONRISK
CODE
28 10,800 Bolts - HEX SET BOLT - M14 x 30 7
29 100,000 Screws - M16 X 35 HEX SET SCREW GAL 7
30 960 Bolts - 6 X 3/4 W HEX BOLT & NUT GALV 7
31 25,000 Washers - 5/8 X 1/4 IND HEX WASH SET ZP 7
32 1,825 Bolts - 4 1/2 X 1/2 CUP HD BOLT & NUT 7
33 1
Various - Comprising of:
15,000 x 3/8 X 3/16 MUSH COMB NIB ZP
18,000 x 47MM X 3/16 QUICKEY SCREW ZP
7
34 1
Nuts - Various, Comprising of:
GRADE 2 HEX NUTS
1/4UNF HEX STEEL NUTS ZP
7
35 1
Various - Comprising of:
5,400 x NYLOC HEX NUT 1/4 UNC
NYLON LOCKNUTS 1/4 ZINC PLATE
7
36 40,000 Screws - 1 1/4 X 1/4 PAN X M/T SCREW ZP 7
37 336,000 Nuts - 10/24 X 3/8AF X 1/8 HEX NUTS Z 7
38 6,000 Nuts - 3/8UNC HEX STEEL CONELOCK ZP 7
39 10,000 Screws - MILD STEEL 3/8-16UNC X 3/4 HEX SET SCREWS 7
40 40,000 Nuts - 1/2 W HEX STEEL NUTS ZP 7
41 4,800 Nuts - SELF LOCKING HEXAGON NUTS LOW TYPE M14 A2 7
42 5,272 Screws - 5 X 3/8 HEX SET SCREWS ZP 7
43 1
Various - Comprising of:
1/2 X 3/16 MUSH COMB NIB M/T Z
3/16 X 3/8 MUSH COMB NIB T/C Z
10-24 X 1/2 MUSH COMB REV NIB T/C ZP
7
44 1
Various Nuts - Comprising of:
5/16 UNF HEX STEEL NUTS Z/Y
5/16 UNC HEX NUT ZP
7
45 1
Various Nuts - Comprising of:
3/8UNF NYLOC NUTS
5/16 NYLOC HEX NUT
7
46 20,800 Screws - 1.3/4 X 5/16 UNC CUP HD ZY 800 PER CTN 7
47 142,000 Nuts - 5/16UNC HEX STEEL NUTS Z/Y 3500 RE CTN (NUT_C516SS) 7
48 8,000 Bolts - 3 X 1/2 BSW HEX BOLT MG (BHS_W123MG 7
49 5,250 Bolts - 1 1/4 X 1/2 BSW HEX BOLT MG (BHS_W12114MG) 7
50 1
Nuts - Comprising of:
4,000 x 1/2 BSW UNC A/F NYLOC NUTS M/G
NYLOC HEX NUT 7/16 UNF
7
Folio 3 of 32
LOT QTY DESCRIPTIONRISK
CODE
51 1
Nuts - Various, Comprising of:
3/8UNC HEX STEEL NUTS ZP
3/8 UNF HEX STEEL NUTS ZP
3/8UNC HEX STEEL NUTS PLN
7
52 1
Screws - Various, Comprising of:
8,000 x 5/16BSW x 3/4 MUSH HD COMB MTS STEEL ZP
1/2 X 3/16 MUSH COMBO REV SERR
3/4 X 3/16 MUSH COMB NIB M/T Z
7
53 1
Nuts - Various, Comprising of:
10/32NF HEX NUTS ZP
8/32 UNC HEX NUTS ZP
7
54 1 Nuts - Pallet, 1/2 W HEX STEEL NUTS ZP (NUT_W12SSZ) (Quantity Unknown) 7
55 7,000 Nuts - 5/8W HEX STEEL NUTS ZP (NUT_W58SSZ) 7
56 120,000 REMOVED LOT 0
57 1
Screws - Various, Comprising of:
3 X 3/8UNC HEX SET SCREW ZP
2 X 3/8W HEX SET SCREW ZP
2 1/4 X 3/8W HEX SET SCREW ZP
7
58 50,000 Screws - 1 3/4 X 3/16 MUSH NIB COMB ZP (MTSZ_316134MC) 7
59 1
Nuts - Comprising of:
1/2 W HEX STEEL NUTS ZP
1/2 W HEX STEEL NUTS GAL
7/16UNF HEX STEEL NUTS PLN
7/16 UNC HEX STEEL NUTS ZP
7
60 1
Nuts - Comprising of:
1 1/8UNC NYLOC NUT Z/P
NYLON LOCK NUTS 1 1/4
7
61 1
Nuts - Comprising of:
3,000 x 1/2W NYLOC NUTS UNC A/F ZP (NN_W12UNCAF)
1,000 x 3 3/4 X 3/8 BSW HEX B/N ZP (BNHS_W38334Z)
7
62 36,000 Nuts - 1/2 BSW UNC A/F NYLOC NUTS M/G (NN_W12UNCMG) 7
63 1
Various - Comprising of:
5,000 x 1 1/4 X 1/2W HEX SET SCREW ZP (SSH_W12114Z)
31,750 x 5/16UNC x 1 1/2 MUSH HD COMB MTS ZP (MTSZ_516112MC)
7
64 1
Screws - Comprising of: 2 Pallets
3/8 X 1/4 MUSH X M/T SCREW ZP
2 X 3/16 MUSH COMBO NIB POINT
7
65 1
Nuts - Various, Comprising of:
1/2 W HEX STEEL NUTS ZP
5/8W HEX STEEL NUTS ZP
5/16UNC FLANGE NUTS F/B
7
66 106,000 Bolts - 2.1/2 X 1/2 BSW HEX BOLT MECH GAL (BHS_W12212MG) 7
67 80,000 Nuts - 1/2W NYLOC NUTS UNC A/F ZP (NN_W12UNCAF) 7
68 1
Screws - Various, Comprising of:
3,000 x 3 X 1/4 MUSH COMB M/T SCREW ZP (MTSZ_143MC)
1 1/4 X 1/4 MUSH COMB M/T ZP (MTSZ_14138MXB)
1 1/4 X 1/4 MUSH COMB M/T ZP (MTSZ_14114MC)
7
69 1
Nuts - Various, Comprising of: 2 Shelves
3/4 UNF HEX NUTS
3/4W HEX STEEL NUTS ZP
5/8W HEX STEEL NUTS ZP
7
70 1
Various - Comprising of: 3 Pallets
5 X 1/2W HEX BOLT & NUT ZP
1 1/2 X 1/2 BSW HEX BOLT MG
7
71 130,000 Rivets - 73SS6-5 CHERRY RIVET (POP_73SS65) 7
Folio 4 of 32
LOT QTY DESCRIPTIONRISK
CODE
72 200,000 Rivets - 73SS6-5 CHERRY RIVET (POP_73SS65) 7
73 45,000 Nuts - 1/2 BSW UNC A/F NYLOC NUTS M/G (NN_W12UNCMG) 7
74 35,200 Bolts - 1.3/4 X 5/16 UNC CUP HD ZY 800 PER CTN (BCH_C516134Y) 7
75 45,000 Nuts - 1/2W NYLOC NUTS UNC A/F ZP (NN_W12UNCAF) 7
76 56,000 Bolts - 1.1/4 X 5/16 UNC CUP HD Z/Y 1000 PER CTN (BCH_C516114Y) 7
77 1
Various - Comprising of: 2 Shelves & Pallet
1 UNF LOCK NUTS Z/Y
3/8 BSW HEX STEEL LOCKNUTS ZP
M10 X 38 X 2.5 WASHER M/G
7
78 123
Various - Comprising of:
3 X 1/2 BSW HEX BOLT MG (BHS_W123MG)
M10 X 38 X 2.5 WASHER M/G (STWZ_M103825M)
200000 x 73SS6-5 CHERRY RIVET (POP_73SS65)
7
79 100,000 Rivets - 73SS6-5 CHERRY RIVET 4.8mm x 12.7mm (POP_73SS65) 7
80 200,000 Rivets - 73SS6-5 CHERRY RIVET 4.8mm x 12.7mm (POP_73SS65) 7
81 12,000
Various - Comprising of:
12000 x M10 X 25 8.8 HEX SET SCR SZY (SSHT_M1025SZY)
M10 HEX NUTS SUPA ZINC YELLOW
7
82 120,000 Rivets - RIVETS 4.8mm x 11.4mm 7
83 114,000 Screws - 1.1/4 X 14 PAN X S/T SCR SZY (STSZ_14114PXY) 7
84 1
Various - Comprising of:
10,000 x SPECIAL WASHERS TO SAMPLE M/Z 47.6 x 17.24 x 5.0 (SPEC_WASSON01)
1/4UNC HEX STEEL NUTS M/Z (NUT_C14SSMZ)
7
85 1
Various - Comprising of: 3 Shelves
5/16W HEX STEEL NUTS GAL
M6 X 20 PAN X M/T SCREW B/Z
3/4 X 14 PAN X S/S S/T SC316
7
86 1
Various - Comprising of: 3 Pallets
3/4 X 5/16 SHORT NECK CUPHD ZP (BCH_W516347),
1 1/2 X 5/8 UNC HEX H/T BOLT (BHT_C58112P)
3/8 X 1/4 MUSH COMB M/T M/Z (MTSZ_1438MCMZ)
7
87 1
Various - Comprising of: 3 Shelves
M12 HEX NUTS SUPA ZINC YELLOW
1/2 X 5/16 MUSH COMB M/T M/Z
M12 X 27.5 X 2.5 WASHER SZY
M10 X 21 X 2 STEEL WASHER SZY
7
88 1 Shelving - Pallet 7
89 222,000 Nuts - M8 HEX STEEL NUTS GAL (NUT_M8SSG) 7
90 1Various - Comprising of: 3 Pallets
M42 HEX STEEL NUTS 7
91 1
Various - Comprising of: 3 Pallets
M12 CHANNEL NUTS GAL
M10 HEX STEEL NUTS PLN
CLASS 8.8 HEX BOLTS & NUTS M10 X 130
7
92 1
Various - Comprising of: 3 Pallets & Shelf
M30 X 60 HEX COUPLER
M10 X 40 HEX COUPLER
M6 X 18 HEX COUPLER
M10 BRASS DOME NUT CHROME
M12 SHEAR NUT
7
Folio 5 of 32
LOT QTY DESCRIPTIONRISK
CODE
93 35,500 Screws - M10 X 25 HEX SET SCREW M/G (SSH_M1025MG) 7
94 28,000 Screws - M10 X 20 HEX SET SCREW M/G (SSH_M1020MG) 7
95 1
Various - Comprising of:
M8 X 50 8.8 H/T SET SCREWS ZP (SSHT_M850Z)
M20 X 80 8.8 H/T SET SCREW ZP (SSHT_M2080Z)
7
96 600Assembled Bolts - TEE HEAD BOLTS W/HEX NUTS & SPRING WASHERS & FLAT WASHERS ASSEMBLED
M16 X 557
97 51,200 Nuts - M8 X 6.1 SPRING NUT (W/O SPRING) 7
98 2,100 Assembled Bolts - M16 x 80/40 BOLT & NUT ASSEMBLED 7
99 1
Various - Comprising of: 3 Pallet & 2 Shelf
M6 x 25mm PAN HD WASH X/R SERR MTS B/Z
M6 X 16 PAN WASH X SERR B/Z
M12 X 30 BOLT/NUT & WASHER
7
100 125,000 Rivets - 73SS6-5 CHERRY RIVET 4.8mm x 12.7mm (POP_73SS65) 7
101 34,000
Screws - M6 X 30 HEX SET SCREW M/G (SSH_M630MG) 7
102 40,000 Nuts - M12 HEX NUTS IN PKTS OF 100 ZP (NUT_M12SSZP) 7
103 16,000 Screws - M12 X 30 8.8 H/T CUP HD BLTGAL (BCHT_M1230G) 7
104 1
Various - Comprising of: 5 Pallets
M10 X 65 CUP HD BOLT GAL
M12 X 40 CUP HEAD BOLT & NUT
M6 X 38 PAN X SERR'CA" B/Z
M6 X 20 DOME HEX SLOT SET M/Z
7
105 1
Various - Comprising of: 2 Shelves & 2 Pallets
M20 HEX NUTS
M10 FLANGE NUTS
M10 SERR FLANGE NUTS
M8 HEX FLANGE NUTS
M10 X 30 HEX S/S SET SCREWS
7
106 1
Various - Comprising of:
5,000 x M16 HEX STEEL NUTS ZP (NUT_M16SSZ)
M16 HEX STEEL NUTS GAL (NUT_M16SSG)
M12 X 70 8.8 H/T BOLT ZP (BHT_M1270Z)
7
107 1
Various - Comprising of: 4 Pallet
M6 X 25 PAN WASH X SERR "CA"BZ
M6 X 30 PAN W/F SERRATED #CA#
7
108 1
Various Screws, Nuts & Bolts - Comprising of: 2 Shelves, 2 Pallet
M14 HEX NUT
M16 HEX NUT
M5 SERRATED FLANGE NUTS ZP
M6 X 16 SQHD BOLT DWG M/G
7
109 9,750 Screws - M12 X 70 8.8 H/T SET SCREW ZP (SSHT_M1270Z) 7
110 1 Cardboard Boxes - 5 Pallets 7
111 1
Various - Comprising of:
M8 X 30 CUP HD BOLT GALV (BCH_M830G)
M12 HEX NUT
7
112 1,020 Screws - M10 X 20 HEX SET SCREW M/G (SSH_M1020MG) 7
113 1
Various - Comprising of:
M24 X 50 HEX BOLT & NUT GAL
M16 X 45 SPEC "T" BOLT ZP
M16 X 102 SPEC "T" BOLT ZP
7
Folio 6 of 32
LOT QTY DESCRIPTIONRISK
CODE
114 1
Various - Comprising of:
30,000 x M8 x 20mm SPEC SQ HD BOLTS M/G (SPEC_RHINO10)
10,000 x M8 X 30 SPEC SQ HD SCREW M/G (SPEC_RHINO14)
M10 X 90 CUP HD BOLT & NUT GAL (BNCH_M1090G)
M8 HEX STEEL NUTS GAL
7
115 1
Nuts - Various, Comprising of:
M8 HEX STEEL NUTS ZP
M8 HEX STEEL NUTS GAL
7
116 1
Various - Comprising of:
18,000 x M6 x 35mm SPEC SQHD BOLT M/G (SPEC_RHINO15)
5,500 x M8 X 16 SPEC SQUARE HD SCR M/G (SPEC_RHINO09)
30,000 x M6 x 16mm SPEC BUTTON HEX POST 5MM S/S (CAPS_M616BP5L)
7
117 1
Various Nuts & Bolts - Comprising of:
60,000 x M6 NYCLOC NUT
M4 HEX STEEL NUTS ZP
M10 X 60 CUP HD BOLT & NUT ZP
7
118 100,000 Screws - M5 X 25 PAN POZI TRILOBE ZP (TAPT_M525PPZ) 7
119 30,000 Screws - M6 X 35 SOCKET CAP SCREW ZP (CAP_M635Z) 7
120 1
Various - Comprising of:
M6 X 45 SOCKET CAP SCREW ZP (CAP_M645Z)
3/4 X 3/8 UNC GRUB SCREW ZP (CAP_C3834SZ)
7
121 1
Various - Comprising of:
M4 X 8 PAN POZI TRILOBE ZP
M4 X 8 PAN X TRILOBE SCREW ZP
M4 X 6 PAN X NIB TRILOB S/S
M4 X 6 PAN X NIB TRILOBE ZP
7
122 1
Various - Comprising of:
41,000 x M6 X 35 SOCKET CAP SCREW ZP (CAP_M635Z)
9,000 x M12 X 30 SOCKET SCR M/G (CAP_M1230MG)
7
123 1
Trilobe Screws - Various, Comprising of:
M4 X 25 PAN X TRILOBE S/S
M5 X 10 PAN POZI TRILOBE ZP
M4 X 20 PAN X S/S TRILOBE
M4 X 12 PAN X NIB S/S TRILOBE
M4 X 10 PAN POZI TRILOB SCR ZP
7
124 86,400 Lock Nuts - IMPERIAL NYLON ZINC 5/16"-18 7
125 1
Various - Comprising of:
M5 X 20 PAN STARDRIVE TRILOBE ZP
M5 X 20 PAN POZI TRILOB B/Z
M5 X 18 BUTTON STARDR TRILOBE S/S
M5 X 10 MUSH COMBO TRILOB NIB
7
126 1
Various - Comprising of: 3 Pallets
M8 X 37 SPEC H/T HARD & ZP SCR
1/4 unc x 1/2 SPEC SHT NECK CUP HD SCRZP
7
127 1
Various - Comprising of: 1 Shelf
M6 X 13 PAN X NIB TRILOBE B/Z
M6 X 16 IND HEX W/HD X TRILOZP
7
128 50,000 Washers - 1 X 5/16 IND HEX WASH S/T M/Z (STSZ_5161IHWM) 7
129 30,000 Bridle Rings - 5/16 - 9 X 100MM 7
130 1
Various - Comprising of: 1 Pallet, 1 Shelf
M6 x 12mm IND HEX WASH HD NIB X/R TRILOB
M8 X 20 IND HEX WASH TRILOBE Z
12MM X 6/32 PAN STARDR TRILOBE
7
131 1
Various - Comprising of:
3/4 X 5/16 IND HEX WASH S/TM/Z
15,000 x 1 3/4 X 5/16UNC HEX H/T BOLT P (BHT_C516134Z)
35.00MM X 10/32 IHW X T/C SCR
7
132 616,000 Screws - 5/8 X 8 PAN STARDR S/T SCR 10# (STSZ_858PT10) 7
Folio 7 of 32
LOT QTY DESCRIPTIONRISK
CODE
133 1
Various - Comprising of:
1/2 BSW x 3 SPEC FLAT HD FOOT BOLT ZP
ROCKUT RIVET CLEAR
KIT,SCREW,COACH 5/16-9TPI x 50mm
M10 X 38 IHWF TRILOBE ZINC
7
134 1
Screws - Various, Comprising of: 3 Pallets
3/4 X 8 PAN X HI-LO SC ZY
16,000 x M6 x 55mm FURNITURE SCREW M/Z
7
135 20,000 Nuts - STEEL THREAD TAPPED BUSH NUTS 3/8 X 22.25 x 14.75 X 35 7
136 624,000 REMOVED LOT 0
137 1
Various - Comprising of:
M6 x 55mm FURNITURE SCREW M/Z (FURN_M655MZ)
M10 X 30 IND HEX WASH TRILOB (TAPT_M1030IHW)
M8 X 74 SPEC TO DWG HA21311D (SPEC_HA21311D)
7
138 1
Various - Comprising of:
5/16 x 1-1/4 HEX SLOT SPIGGOT SCREW ZP
10/24 UNC KEP NUTS ZP
7
139 480,000 REMOVED LOT 0
140 624,000 REMOVED LOT 0
141 624,000 REMOVED LOT 0
142 40,000 Screws - SPEC 8/32 S/S SCREW TO DRAWING (SPEC_0693M) 7
143 1
Various - Comprising of:
M5 X 35 PAN STAR TRILOBE
M5 X 25 PAN STAR TRILOBE
M5 X 16 PAN STAR TRILOBE
7
144 1
Various - Comprising of:
M5 X 12 PAN STAR SCREW
M5 X 12 PAN STAR TRILOBE
7
145 1
Washers & Screws - Various, Comprising of:
M4 x 5.5mm SPEC LARGE WAFER X/R PLAS ZP
M3 x 16mm PAN HD WASHER STARDR PLASTITE
4MM X 5.5 WAFER X PLASTITE ZP
M3 X 10 PAN X PLASTITE ZP
7
146 1Screws & Washers - Various, Comprising of:
M3 X 25 PAN STARDR W/HD PLAST7
147 624,000 REMOVED LOT 0
148 624,000 REMOVED LOT 0
149 624,000 REMOVED LOT 0
150 1
Various - Comprising of:
15,000 x M5 x 65mm CSK HD X/R TYPE CA SCREW ZP (SPEC_8555ZP)
M10 X 38 IHWF TRILOBE MECHGAL
7
151 1
Various - Comprising of: Shelf
M4 x 30mm PAN HD STARDR PLASTITE ZP
M5 X 20 PAN STARDR PLASTITE S/S
M4 x 14mm WAFER HD STARDR POST S/S
7
152 57,000 Washers - M10 X 38 X 2.5 WASHER M/G (STWZ_M103825M) 7
153 1
Various - Comprising of:
20,000 x M10 X 38 X 2.5 WASHER M/G (STWZ_M103825M)
5/16unc x 1 1/4 SPEC FLAT HD MTS ZP (SPEC_T2651)
7
154 1
Various - Comprising of: 3 Pallets
7,000 x M10 X 110 HEX BOLT 35MM ZP (BHS_M10110Z)
DRUM BOLTS
7
Folio 8 of 32
LOT QTY DESCRIPTIONRISK
CODE
155 1
Drum Bolts - Various, Comprising of: 3 Pallets
5/16unc x 2-1/2 HEX HD SLOT DRUM BOLT
2 3/4 X 5/16UNC DRUM BOLT ZP
5/16unc x 4 HEX HD SLOT DRUM BOLT
7
156 38,400 Bolts - 1.80" X 5/16 UNC SPEC CUP HDZP (SPEC_HA20310D) 7
157 38,400 Bolts - 1.80" X 5/16 UNC SPEC CUP HDZP (SPEC_HA20310D) 7
158 40,000 Nuts - T NUT 3/8-16 7
159 4,000 Drum Slots - 3 1/2 X 5/16UNC HEX SLOT DRUM 7
160 2,250 Drum Bolts - 5/16unc x 4 SPEC DRUM BOLT STEEL ZP (DRUM_W5164FTZ) 7
161 14,400 Screws - 1/2 SPEC CSK SCREWS B/Z (SPEC_SB8888) 7
162 27,000 Allen Keys - M5 BALL END ALLEN KEY 85X33MM (KEYS_M5BE) 7
163 20,000 Nuts - 5/8 X 5/16 "T" NUTS PRONG ZP (TNUT_W51658PP) 7
164 1
Washers - Various, Comprising of: Shelf
M16 X 27
M20 X 33
7
164A 38,400 Washers - INDENTED HEX 3/8-16UNC x 50mm 7
164B 61,000 Nuts - M6 FURNITURE NUT M/GAL- PAINTED (FURN_M6NUT) 7
165 7,800 Bolts - M12 X 35 8.8 SILO BOLT SUPA ZP 7
166 8,000 Bolts - M12 X 25 8.8 SILO BOLT SUPA ZP 7
167 9,200 Bolts - M12 X 25 8.8 SILO BOLT SUPA ZP 7
168 9,200 Bolts - M12 X 25 8.8 SILO BOLT SUPA ZP 7
169 1Washers - Comprising of: Shelf
Square Washers, Mild, Steel M24X75X67
170 1
Various - Comprising of:
21,230 x 30 MM X 3/8 UNC SPEC TRILOB ZP (SPEC_HA21320D)
144,000 x ALLEN KEYS
7
171 1
Washers - Various, Comprising of: Shelf
SQUARE M16 X 75 X 5
M20 X 50 X 3
M16 X 75 X 6
7
172 1
Various - Comprising of:
86,400 x 1 3/4 X 10/24 PAN X M/T Z/Y (SPEC_HA20407D)
ALLEN KEYS
7
173 55,000 Nuts - M12 FLANGE NUTS C8 SUPA ZINC 7
174 21,318 Screws - 50MM X 3/8 UNC SPEC TRILOB ZP (SPECHA21318D) 7
175 1
Various - Comprising of: Shelf
M12 X 50 X 5 WASHERS
M10 X 100 HEX SET SCREWS
M12 X 50 X 50 X 5 SQ WASHER
7
176 58,500 Washers - SPEC WASHER TO DWG HA22228D (SPEC_HA22280) 7
Folio 9 of 32
LOT QTY DESCRIPTIONRISK
CODE
177 88,000 Screws - 5/8 X 1/4 HEX SERRATTED H/T ZP (SPEC_HA21321D) 7
178 1
Washers - Comprising of: Shelf
Square Washer M8 X 38 X 3
M12 X 40 X 40 X 3 SQ WASH GAL
FLAT SQUARE WASHER M12 X 50 X 3
7
179 40,000 Keys - M5 Short Arm Allen Keys 7
180 50,000 Screws - 5/8 X 1/4 HEX SERRATTED H/T ZP (SPEC_HA21321D) 7
181 1,800 Screws - 50MM X 3/8 UNC SPEC TRILOB ZP (HA_21318D) 7
182 1
Various - Comprising of:
4,800 x M10 X 35 8.8 SILO BOLT SUPA ZP
128,000 x 30 X 10 SPEC X S/S (8PACK) B/Z
7
183 1
Various - Comprising of:
80,000 x 35MM X 14-14 IHWF SPEC SCREW
40,000 x 4-10 x 20mm SPEC INDENT HEX WF SCREW
7
184 1
Various - Comprising of: 2 Shelf
35MM X 14-14 IHWF SPEC SCREW
M39 X 77 WASHER
M24 X 52 WASHER
7
185 4
Various - Comprising of:
30 X 10 SPEC X S/S (8PACK) B/Z
28,000 x 30 X 10 SPEC X S/S (8PACK) BRS
7
186 100,000 Nuts - M8 FLANGE NUTS C8 SUPA ZINC (FLAN_M8C8SZ) 7
187 57,600 Screws - 30 MM X 3/8 UNC SPEC TRILOB ZP (SPEC_HA21320D) 7
188 57,600 Screws - 30 MM X 3/8 UNC SPEC TRILOB ZP (SPEC_HA21320D) 7
189 41,000 Nuts - M10 FLANGE NUTS C8 SUPA ZINC (FLAN_M10C8SZ) 7
190 41,000 Nuts - M10 FLANGE NUTS C8 SUPA ZINC (FLAN_M10C8SZ) 7
191 45,000 Nuts - M10 FLANGE NUTS C8 SUPA ZINC (FLAN_M10C8SZ) 7
192 1
Various - Comprising of:
30,000 x M12 FLANGE NUTS C8 SUPA ZINC (FLAN_M12C8SZ)
2,000 x M10 x 25mm HEX WASH SILO BOLT SUPA ZINC
7
193 1
Various - Comprising of:
13,800 x Hex Washer 3/816UNC x 50mm
12,800 x M12 X 37 X 3 FLAT WASHER GAL (STWZ_M12373G)
2,400 x M14 X 44 X 3 FLAT WASHER ZP (STWZ_M14443Z)
7
194 64,000 Screws - 30 MM X 3/8 UNC SPEC TRILOB ZP (SPEC_HA21320D) 7
195 15,200 Bolts - M8 X 25 8.8 SILO BOLT SUPA ZP 7
196 50,000 Bolts - M8 X 20 8.8 SILO BOLT SUPA ZP 7
197 1
Various - Comprising of:
17,500 x M10 X 20 8.8 SILO BOLT SUPA ZP (SPEC_MODERN06)
46,000 x M12 FLANGE NUTS C8 SUPA ZINC (FLAN_M12C8SZ)
7
198 1
Various - Comprising of:
Pallet of Rags
Shelf of Washers
7
199 192,000 Screws - 10-16X16 HEX TEK C4 EVERGREEN 7
200 240,000 Screws - 10-16X16 HEX TEK C4 WINDSPRAY 7
Folio 10 of 32
LOT QTY DESCRIPTIONRISK
CODE
201 1
Various - Comprising of:
160,000 x CSK PHILLIPS HEAD 7-19A - 3/4
35,000 x 14-20 X 25 HEX TEK SERR ZP
7
202 1
Screws - Comprising of:
250,000 x 6-20 x 1/2 PAN HD X/R STS 410 S/S BZ (STSS_612PX410)
50,000 x 8-18 x 7/8 CSK HD X/R STS S/S (STSS_878CX)
7
203 250,000 Screws - 12-14X20 HEX TEK C4 CAUL GREEN 7
204 1
Screws - Comprising of:
SELF DRILLING 10-16 X 22
SELF DRILLING 10-24 X 16
7
205 24,500 Screws - 14-10 x 61mm INDENT HEX WF SPEC SCREW (SPEC_VIP01) 7
206 57,600
Various - Comprising of:
57,600 x M10 HEX S/S NUT A480 316 (NUTS_M10SSS31)
16,000 x 1 5/8 X 10 SPEC PAN X "A" S/T (SPEC_DDALUM20)
7
207 27,000 Screws - 14-10 x 61mm INDENT HEX WF SPEC SCREW (SPEC_VIP01) 7
208 4,800 Screws - M12 X 65 HEX S/S SET SCREW (SSHS_M1265) 7
209 13,200 Washers - 1/8 X 5/16 X 22 FLAT WASH ZP (STWZ_1851622) 7
210 77,000 Self Drilling Screws - 12-14X20 HEX TEK C4 MONUMENT 7
211 1
Screws - Various, Comprising of:
FLANGED HEX HEAD 12-14X35
12-14 X 35 HEX TEK SCREW Z/Y
7
212 352,000 Screws - 10-16X16 HEX TEK C4 MEADOW 7
213 2,700
Various - Comprising of:
2,700 x M12 HEX NUTS S/S 316 # (NUTS_M12SSS31)
120,000 x 10-16 X 16 WAFER X TEK CL4 (TEKS_101616W3)
7
214 30,000 Screws - 2 X 5/32 CSK SLOT S/S M/T SCR (MTSS_53220X) 7
215 64,000 Screws - 12-14X20 HEX TEK B8 W/NEO (TEKS_121420N8) 7
216 100,000 Self Drilling Screws - 12-14X20 HEX TEK C4 BOUNDARY 7
217 1
Various - Comprising of:
M10 x 60 SCREWS
8-18 X 20 PAN X TEK S/S SCR (TEKS_81820PXS)
7
218 144,000 Screws - Self Drilling Indent Ex Washer 10-16 x 16 7
219 874,000
Screws - Comprising of:
874,000 x 1 X 1/4 PAN X M/T SCREW NP (MTSZ_141PXNP)
155,000 x 5/8 X 10 PAN X S/T SCREWS B/Z (STSZ_1058PXB)
7
220 71,000
Screws - Comprising of:
71000 x 8-18 X 12 HEX TEK C4 BLACK (TEKS_81812H4B)
1525 x M10 x 100mm SCREWS
7
221 144,000 Self Drilling Screws - 12-14X20 HEX TEK C4 BASALT 7
222 1
Hex Bolts & Screws - Various, Comprising of:
M10 X 45 HEX S/S SET SCREWS
M10 X 40 HES SET SCREWS
7
223 432,000 Self Drilling Screws - 10-16X16 HEX TEK C4 RIVERSAND 7
224 15,600 Bolts - HEX HEAD BOLTS M10-1.5 X 50 7
Folio 11 of 32
LOT QTY DESCRIPTIONRISK
CODE
225 270,000 Screws - 8-18 X 12 IND HEX W/HD TEKC4 (TEKS_81812HC4) 7
226 1,900 Screws - M12-1.75 x 90 Hexagon Head Screws 7
227 90,000 Screws - 10-24 X 22 HEX TEKS SCREW C4 (TEKS_102422H3) 7
228 1,300 Bolts - M10 X 120 HEX BOLT G316 (BHS3_M10120) 7
229 126,000 Self Drilling Screws - 10-16 X 16 HEX TEK CS DEEP JAC (TEKS_101616DJ) 7
230 76,000 Screws - 12-14X20 HEX TEK C4 SLATE GREY (TEKS_121420SG) 7
231 18,000 Bolts - 2 X 3/8 IHWF S/S BOLT 316# 7
232 10,500 Screws - M12 X 65 HEX S/S SET SCREW (SSHS_M1265) 7
233 30,000 Washers - Indented Hex Washer 14-10A x 30mm 7
234 1
Various - Comprising of:
M3 X 6 PAN X DIN 7985 S/S M/T (MTSS_M36OC)
M8 X 75 S/S HEX BOLT 316
7
235 92,000 Self Drilling Screws - 10-16X16 HEX TEK C4 BLUESTONE 7
236 108,000 Self Drilling Screws - 10-16X16 HEX TEK C4 DOMAIN 7
237 90,000 Self Drilling Screws - 10-16X16 HEX TEK C4 IRON BARK 7
238 1
Various - Comprising of:
M12 X 75 HEAD SET SCREWS
M10 X 30 HEX S/S SET SCREWS
7
239 144,000 Screws - 10-16X16 HEX TEK C4 SUMMERSHAD 7
240 30,000 Nuts - M12 HEX NUTS S/S (NUTS_M12SSS) 7
241 1,950 Bolts - HEX BOLT M16 x 75 7
242 36,000 Screws - Self Tapping Screws 14 x 1-1/14 7
243 128,000 Screws - 1/2 X 12 PAN X S/T SCREWS ZP (STSZ_1212PX) 7
244 50,000 Self Drilling Screws - 10-16X16 HEX TEK C4 GREY RIDGE 7
245 34,000 Self Drilling Screws - 10-16X16 HEX TEK C4 HARVEST 7
246 128,000 Self Drilling Screws - 10-16X16 HEX TEK C4 MEADOW 7
247 1
Various - Comprising of:
M10 STAINLESS HEX NUT
M8 FLAT WASHER
M8 NUTS
7
248 144,000 Screws - 10-16X16 HEX TEK C4 GREY RIDGE 7
249 288,000 Screws - 10-16X16 HEX TEK C4 SATIN BLK 7
Folio 12 of 32
LOT QTY DESCRIPTIONRISK
CODE
250 144,000 Screws - 10-16X16 HEX TEK C4 SURFMIST 7
251 39,600 Nuts - M12 HEX NUTS S/S (NUTS_M12SSS) 7
252 13,200 Nuts - M10 HEX NUTS S/S (NUTS_M10SSS) 7
253 52,200 Nuts - M10 HEX NUTS S/S (NUTS_M10SSS) 7
254 36,000 Nuts - 5/16UNC S/S FLANGE NUTS (FLAN_C516SS) 7
255 4,800
Various - Comprising of:
4,800 x M8 X 20 HEX S/S SET SCREW (SSHS_M820)
38,400 x Stainless Hexagon Nuts M6
7
256 90,000 Self Drilling Screws - 10-16X16 HEX TEK C4 MONUMENT 7
257 101,000 Self Drilling Screws - 10-16X16 HEX TEK C4 RIVERSAND 7
258 68,000 Self Drilling Screws - 10-16X16 HEX TEK C4 SATIN BLK 7
259 1
Washers - Various, Comprising of: Shelf
M10 X 21 X 1.2 S/S WASHER
M12 X 24 X 1.5 S/S WASHER
7
260 12,500 Screws - 12-14 X 65 HEX CL4 F/GLASS RED (TEKS_1265FGR4) 7
261 14,600 Screws - M12 X 65 HEX S/S SET SCREW (SSHS_M1265) 7
262 1
Various - Comprising of:
4,500 x 25MM X 7/19 PAN COMB S/S HILO
268,000 x 5/8 X 1/4 MUSH X S/S M/T SCREW (MISS_1458MX)
7
263 1
Various - Comprising of:
10-16X16 HEX TEK C4 HARVEST
Indented Hex Washer
7
264 1
Various - Comprising of: 3 Pallets
8-18 x 1/4 SPEC PAN HD COMB TYPE "B" ZP
M10 S/S SPRING WASHERS
M10 S/S SPRING WASHERS
7
265 30,000 Self Drilling Screws - 10-16X16 HEX TEK C4 SUMMERSHAD 7
266 65,000 Self Drilling Screws - 10-16X16 HEX TEK C4 SURFMIST 7
267 117,000 Self Drilling Screws - 10-16X16 HEX TEK C4 TEA TREE 7
268 3,825
Various - Comprising of:
3,825 x 3/8unc x 25mm BUTTON HD STRDR POST MTS (CAPS_C3825BTP)
45MM X 3/8NC BUTTON STRDR POST (CAP_C3845BTP)
7
269 91,600
Screws - Comprising of:
91,600 x 1 1/4 X 6 CSK X S/T SCREWS ZP (STSZ_6114CX)
1 1/4 X 6 PAN X S/T SCREWS ZP (STSZ_6114PX)
7
270 VACANT LOT 0
271 162,000 Screws - 1/2 X 6 PAN X S/T SCREW ZP 7
272 4,400 Screws - HEX SET 3/8 X 2 1/2 7
273 72,000 Washers 7
Folio 13 of 32
LOT QTY DESCRIPTIONRISK
CODE
274 110,000 Self Drilling Screws - 10-16X16 HEX TEK C4 WILLOW 7
275 56,000 Self Drilling Screws - 10-16X16 HEX TEK C4 JASPER 7
276 19,000 Self Drilling Screws - 10-16X16 HEX TEK C4 WINDSPRAY 7
277 1
Screws - Various, Comprising of: Shelf
100MM X 3/8 NC BUTT STAR POST
82MM X 3/8NC BUTTON STRDR POST
3/8NC x 65mm BUTTON HD STRDR POST CAPSCR
7
278 1
Screws - Various, Comprising of: 1 Pallet
PUMP COVER SPEC HILO (WAXED)
8-18 X 12 PAN X TEK SC B/Z
7
279 1
Screws - Various, Comprising: 1 Pallet
M4 X 32 SPEC TRILOB HOT WAXED
5/16UNC HEX LOCK NUTS S/S
50MM X 12 CSK POZI "A" 10#HD Z
7
280 1
Screws - Comprising of:
M6 X 16 TRIM HEX TRILOBE DWG
M6 X 16 PAN HEXDR PLASTITE ZP
7
281 1 Washers - 45MM X 5/16 IND HEX WASH S/T Z 7
282 1
Various - Comprising of:
8 1/4 X 1/2 LAG SCREWS ZINC
2 1/2 X 1/2W CUP HD BOLT ZP
7
283 1 Bolt Anchors - Bremick, M20 X 125 7
284 315,000 Rivets - 73AS68 5050 RIVETS 4.8mm x 17.5mm 7
285 571,637
Spacers - Comprising of:
SPACER TO DWG 571637
SPACER TO DWG 565153
7
286 87,500
Various - Comprising of:
87,500 x 33.5MM X 10 RSD POZI SB8546
9,000 x 8-18 X 12 PAN X SDS S/S SCR (TEKS_81812PXS)
10,000 x 3/8 SLAB TEE NUTS ZP (TNUT_M10SZP)
7
287 8,750
Bolts - Comprising of:
8,750 x M8 X 70 HEX SLOT DRUM BOLT ZP
12,000 x 3 X 5/16 UNC DRUM BOLT ZP
7
288 600,000 Rivets - Blind Rivets 3.2mm x 8.22 7
289 80,000 Screws - 5/8 X 8 CSK X U/CUT S/T ZP 7
290 96,000 Screws - 3/8 X 14 PAN POZI SPEC SCR ZP 7
291 1
Various - Comprising of:
3,300 x 2 X 5/16UNC DRUM BOLT ZP
37,500 x Reject
7
292 310,000 Rivets - Blind Rivets 4.8mm x 11.1mm 7
293 1,008,000 Screws - 8-18 X 13 PAN X S/S TEK 6# 7
294 15,000
Various - Comprising of:
15,000 x 12 X 50MM IND HEX WASH T17 C4 (TCSZ_1250IHW3)
45,000 x 3/4 X 6 CSK X S/S S/T SCREWS
7
295 35,000
Various - Comprising of:
35,000 x 2BA x 5.3mm WAFER HD X/R MTS Z/Y (SPEC_LOCK11)
11,000 x SPEC DIRECT SCR M4 X 25 CSK RF (SPEC_LOCK6)
7
Folio 14 of 32
LOT QTY DESCRIPTIONRISK
CODE
296 1
Hot Dip Galvanised Structural Assembly - Various, 3 Shelfs
Comprising of:
M30 X 130, M30 X 120, M30 X 110, M36 X 90, M20 X 75
7
297 198,000 Screws - 10-16X16 HEX TEK C4 RIVERSAND & EVERGREEN 7
298 187,000 Screws - 10-16X16 HEX TEK C4 MEADOW 7
299 25,000 Washers - 25MM X 10-16IND HEX W/HD X Z/Y (SPEC_98AO31) 7
300 1
Hot Dip Galvanised Structural Assembly - Various, 3 Shelfs
Comprising of:
M16 X 140, M16 X 130, M16 X 120, M24 X 240, M16 X 100, M16 X 90, M24 X 170, M16 X 75, M16 X 60
7
301 1
Screws - Comprising of:
99,000 x 12-14X20 HEX TEK C4 MONUMENT
198,000 x 12-14X20 HEX TEK C4 SURFMIST
7
302 198,000 Screws - 12-14X20 HEX TEK C4 BLACK 7
303 1
Screws - Comprising of:
160,000 x SELF TAPPING SCREWS 8-18 X 5/8
10,000 x FLANGED HEX 14 X 50
7
304 3
Hot Dip Galvanised Structural Assembly - Various, Comprising of: 3 Shelf
M24 x 75
M24 x 100
M12 x 100
7
305 198,000 Screws - 12-14X20 HEX TEK C4 SUMMERSHAD 7
306 198,000 Screws - 12-14X20 HEX TEK C4 RIVERSAND 7
307 198,000 Screws - 12-14X20 HEX TEK C4 TERRACE 7
308 8,000
Various - Comprising of:
8,000 x TYPE 17 FLANGED HEX 10x50
Self Drilling Hex Screws
72,000 x CSK
7
309 55,000 Screws - 1 1/2 X 10 CSK X S/S S/T SCREW (STSS_10112CX) 7
310 3
Hot Dip Galvanised Structural Assembly - Various, Comprising of: 3 Shelfs
M12 x 30
M20 x 210
M20 x 250
M12 x 70
7
311 198,000 Screws - 12-14X20 HEX TEK C4 WILLOW 7
312 180,000 Screws - 12-14X20 HEX TEK C4 GALV (TEKS_121420H3) 7
313 88,000 Screws - 12-14X20 HEX TEK C4 GALV (TEKS_121420H3) 7
314 1 Screws - Pallet, PHILLIPS HEAD SELF TAPPING SCREWS 6 X 11 7
315 27,000 Screws - 14-10 X 75MM IND HEX W/HD 17 7
316 324,000 Screws - PAN PHILLIPOS HEAD 8-18 X 1 TYPE 17 7
317 1
Various - Comprising of: 4 Shelves
Hot Dip Galvanised Structural Assembly
M8 X 30 8.8 BUTTON STARDR TOYOTA SPEC
M8 S/S HEX NUTS PTFE DRY FILM
M20 STRUCTURAL WASHERS G/WIDE
7
Folio 15 of 32
LOT QTY DESCRIPTIONRISK
CODE
318 99,000 Screws - 12-14X20 HEX TEK C4 PRIMROSE 7
319 99,000 Screws - 12-14X20 HEX TEK C4 SATINBLACK 7
320 99,000 Screws - 12-14X20 HEX TEK C4 BLUESTONE 7
321 77,000 Screws - 12-14X20 HEX TEK C4 WINDSPRAY 7
322 180,000 Screws - PAN PHILLIPS HEAD 8-18 X 1 TYPE 17 7
323 90,000 Rivets - 1 3/16 X 3/16 OVAL SEMI TUBE Z (RIVS_3161316M) 7
324 320,000 Screws - CSK PHILLIPS HEAD SELF TAPPING 6-20 X 3/4 7
325 1
Various - Comprising of: 2 Shelves
5.9mm x 25mm SPEC TRUSS X/R T'B' S/S R/F
M6 X 30 8.8 H/T SET SCREW RF
M6 X 20 IND HEX W/HD TRILOB CA
7
326 1
Various - Comprising of: 2 Shelves
SEMITUB RIVET 3/16 X 2-5/8
3/8 X 5/32 PAN X M/T SCREW SZ
2 X 1/4 OVAL SEMI TUB RIVET
7
327 165,000 Screws - 12-14X20 HEX TEK C4 BLUESTONE 7
328 165,000 Screws - 12-14X20 HEX TEK C4 NEO PRIM 7
329 39,000 Screws - 12-14X35 HEX TEK C4 NEO PRIM 7
330 1
Various - Comprising of: 2 Shelves
3,000 x M8 X 100 HEX 4.6 SET SCREW RF (SPEC_SCRW0911)
M6 x 25mm SPEC BUTTON HD HEX DR MTS SS
SEMI TUBE RIVETS
7
331 1
Various - Comprising of: 2 Shelves
SEMI TUB RIVETS
M5 X 49 CROSS HEAD SCR AS DWG
5/16 X 4/40 CSK X S/S TRILOBE
7
332 99,000 Screws - 12-14X20 HEX TEK C4 WILLOW 7
333 9,000 Screws - M8 X 60 CSK NO:4 X S/S M/T SCR 7
334 245,000 Screws - M4 X 19 CSK X TRILOBE ZP (SPEC_3B70-017) 7
335 1
Various - Comprising of: 3 Shelves
M4 X 10 PAN X W/HD S/S T/C RS
M4 X 6 PAN X S/S SCREW SPEC HD
M4 X 10 PAN X W/F S/S T/C
M4 X 20 MUSH X S/S M/T SCREWS
SEMI TUB RIVETS
7
336 1
Screws - Comprising of: 1 Shelf
M5 x 12mm SPEC PAN HD X/R TRI-lLOBE S/S (SPEC_FS0066)
-32 x 1-1/8 RSD CSK HD X/R TRILOB S/S
7
337 1
Various - Comprising of:
82,500 x 8_18 x 5/8 SPEC HEX WASH SCREW TO SAMPLE
20MM X 8-18 IHWF TEK SCREW R-F
M6 x 9mm BUTT HD W/F HEX DRIVE MTS S/S
M5 x 8mm SPEC PAN HD X/R MTS S/S RS
7
338 1
Various - Comprising of: 3 Pallets
165,000 x BA-282 SPECIAL DRIVE PIN TCC
16,000 x 1 1/4 X 12 IND HEX WASH X Z/Y
7
Folio 16 of 32
LOT QTY DESCRIPTIONRISK
CODE
339 1
Various - Comprising of: 1 Shelf
M5 X 20 CSK SOCKET SCREW S/S R/F
M3 x 9mm SPEC MUSH HD X/R MTS S/S
12-14 x 15mm SPEC PAN X/R W/HD S/S RS
7
340 1
Various - Comprising of: 2 Shelves
SEMI TUB RIVET 1/8 X 3/16
RIVETS
7
341 1
Various - Comprising of: 1 Shelf
SEMI TUB RIVETS
3/16BSW x 1 SPEC PAN HD X/R MTS ZP
8-32unc x 1-1/2 SPEC CSK X/R TRI-LOBE ZP
7
342 1
Various - Comprising of: 3 Pallets
40,000 x WAFER & HILO SCREWS
80,000 x 12MMX6 WAFER X S/S SCREW RS
80,000 x 8-18 x 1/2 SPEC HEX WASHER HD TO SAMPLE
7
343 1
Various - Comprising of: 2 Shelves, 1 Pallet
M5 X 10 IND HEX X SCREW BLK
10-16 x 9mm SPEC HILO SCREW ZP
12.5MM X 12 SPEC SCREW B/Z
3/16BSW x 7.5mm SPEC MUSH X/R MTS S/S RS
M6 X 20 SPEC BUTTON SOC SCR SS
SEMI TUB RIVETS
7
344 2
Various - Comprising of: 2 Shelves
M4 x 16mm SPEC PAN HD STARDR TRILOBE R/F
3/8 X 10/32 CSK X UCUT S/S T/C
7
345 12,000 Screws - 61.5 X 1/4 SPEC SCREW DWG Z/Y (SPEC_690913) 7
346 1 Various - Comprising of: 2 Pallet 7
347 1 Nuts - HEX FLANGE NUT SLEEVE ANCHOR 12 X 99 7
348 4,000 Nuts - HEX FLANGE NUT SLEEVE ANCHOR 12 X 99 7
349 16,500 Bolts - M10 X 40 S/S CUP HEAD BOLT (BCHS_M1040) 7
350 16,500 Nuts - Prolock Shear Nuts, 8mm 7
351 40,000 Rivets - Special Variety 7
352 48,000 Bolts - MILD STEEL SHORT NECK CUP HEAD BOLTS M10-1.5 X 16 7
353 90,000 Screws - 6 x 45 SINGLE DRYWALL 7
354 1
Various - Comprising of: 3 Pallets
MILD STEEL SHORT NECK CUP HEAD BOLTS M10-1.5 X 16
FISCHER PRODUCT
7
355 1
Whole Bay - Comprising of:
Fairing Coat Mortar
Plastic Buckets
Screws **END OF PALLETS**
7
356 1
Shelf Comprising of: 14-10 X 75MM IND HEX W/HD 17 3 (TCSZ_1475H173), 14 X 100MM IND HEX TY17 C4
(TCSZ_14100IH4), 12-11 X 30MM HEX T/17 Z/Y (TCSZ_1230IH1Y), 12-11 X 50MM IND HEX W/HD T17
(TCSZ_121150HG), 14 X 100MM BUGLE BATTEN CL2 (TCSZ_14100BY), 10-12 X 35MM WAFER X T17 C3
(TCSZ_1035WXC3), 10 X 40MM PAN TRILO DR T17 M/Z (TCSZ_1040PTD1)
7
Folio 17 of 32
LOT QTY DESCRIPTIONRISK
CODE
357 1
Shelf Comprising of: 14# SPEC CSK POZI EURO SCR NP (SPEC_NOBBY01), 25MM X 1/4 SPEC TRILOBE X
S/S (SPEC_PS7295), M5 x 9mm SPEC CH HD SLOT MTS BRASS NP (SPEC_830021), 2 1/8 X 10 IND HEX S/T
SCR "A" (SPEC_JAG01), 20MM X 8 BUTTON HD STREAK ZINC (SPEC_RJ03), 8.50/9.00 X 10 PAN X "B" S/S
(SPEC_AIRLIT02), 10.50/11.00 X 10 PAN X "B" S/S (SPEC_AIRLIT03), 1/2 X 8 CSK SQDR U/C S/S S/T 6 HD
(SPEC_HANLON01), 25MM X 8 BUTTON X S/S STITCH (STIT_825BXSS), 14 # POZI EURO SCREW NICKEL
(SPEC_STEG09), M4 X 45 BREAK OFF SCREW ZP (SPEC_STEG08), 1 1/4 X 10 CSK X U/CUT S/S 8#
(SPEC_MCCALL01), 5-20 x 5/8 SPEC PAN HD X/R STS S/S (SPEC_CW01), 6-20 x 9/32 PAN HD X/R TYPE 'B'
S/S (SPEC_846919), 1/4 X 4/40 PAN X M/T SCREW ZY (SPEC_846998), M4 X 12 SPEC "T" BOLT DWG ZP
(SPEC_HARCRO25), 1 3/4 X 5/32 MUSH WASH COMB (SPEC_170163), M5 X 1/4 PAN COMB SPEC SCR N/P
(SPEC_LX02), SPEC RETAINER BOLT TO DWG (SPEC_NAT01), 45MM EXT BAR HCP-RM-4082FE45
(SPEC_UNIPLA01), M5 x 65mm CSK HD X/R TYPE CA SCREW ZP (SPEC_8555ZP), 1 1/4 X 8 PAN X HI-LO
SCREWZY (HILO_8114PXY), 23MM X 12-14 SPEC SCREW TO DWG (SPEC_1412482), M4 X 9 SPEC IND HEX
W/D SCR ZP (SPEC_849901), M3 X 19 SPEC BRASS SCREW NP (SPEC_847582), SPEC PAN COMB
SCREWS TO DWG (SPEC_690228), 5/16 X 6BA SPEC CH HD S/S SCR (SPEC_829739), M24 HEX NUT 316
S/S RFLAKE BLK (SPEC_FLANGE01), 91256-20XS SPECIAL RIVETS (SPEC_91256), M10 X 19 BUTTON
TRIDR CA 8.8ZY (SPEC_ALLFAS07), M8 X 20 SPEC BUTTON HEAD B/Z (SPEC_REDLINE2), M6 X 22 SPEC
CSK SCREW ZP (SPEC_CF3058), M6 X 8 SPEC T BOLT ZINC (SPEC_HARCRO17), 13.2 X 6 SPECIAL
SCREW TO DWG (SPEC_7884), M6 X 12 CLINCHING STUD S/S (SPEC_OXFORD01), SPEC_PCF001
(SPEC_PCF001), 3/8 UNC X 30MM KNOB BLK CKH030 (SPEC_OBRIEN02), M8 X 20 IND HEX W/HD SER
8.8ZY (SPEC_WITTUR01), WWC 608 (5/16) WAVE WASHER (SPEC_WWC608), M8 X 20 IND HEX W/HD SER
8.8ZY (SPEC_WITTUR01), WWC 608 (5/16) WAVE WASHER (SPEC_WWC608), M16 X 180 HEX BOLT GAL
100 THD (SPEC_TAPPAT06), 14 # POZI EURO SCREW NICKEL (SPEC_STEG09), 3.5 X 15 HOSPA PHIL
SCREW ZP (SPEC_STEG07), M12 X 45 H/T GAL SET ASSEMBLES (SPEC_INGAL03)
7
358 1
Shelf Comprising of: M3 X 4 SPEC CH HD X S/S SCREW (SPEC_SC0085), 8.6 X 8 CSK X U/CUT B S/S 7#
(SPEC_SC0049), 27.5 X 6 PAN X S/S S/T SCREW (SPEC_SC0058), STAINLESS WINDER SPACER
(SPEC_SC0056B), 6-20 x 3/8 SPEC CSK HD X/R TYPE AB S/S (STSS_638CX4), 34MM X 6 PAN X SQDR S/S
STS8# (SPEC_SC0002), 8-18 x 3/4 CSK HD (6#) X/R STS S/S (STSS_834CX6), M4 x 3/8 MUSH HD COMB NIB
TYPE 23 ZP (TCSZ_M438MCN), 10-24 X 5/16 SPEC FLAT T/C ZP (TCSZ_1024516F), 10-24 x 1/2 SPEC U/CUT
CSK HD #8 X TY23 (TCSS_102412CXU8), 13MM X 12 CSK X U/CU T/17 S/S (TCSS_1213CXU1), 1/2 X 10 CSK
X U/C S/S 9.3MM (STSS_1012CXU9), 8-18 x13mm CSK HD X/R TYPE "B" S/S (STSS_813CXB), 6-20 x 34mm
TRUSS HD SQ DR TYPE AB S/S (STSS_634TSQ),10-24unc x 3/4 SPEC U/C CSK X/R MTS S/S
(SPEC_997041), 3/8 X 6 PAN X S/S S/T SCR 4# (STSS_638PX4), 8-18 x 3/4 SPEC PAN HD X/R TYPE "B" S/S
(STSS_834PXB), 1 X 6 PAN X SQDR S/S S/T SCREW (STSS_61PXSQ), 6-18 x 1 BUTTON HD STARDR POST
TYPE A SS (STSS_61BTPA), 8-18 X 13 PAN X S/S TEK 6# (TEKS_81813PXS), 8-18 x13mm CSK HD X/R TYPE
"B" S/S (STSS_813CXB), 2 X 6 TRUSS X S/S S/T SCREW (STSS_62TX), 8-18 x 63mm PAN HD X/R TYPE AB
S/S (STSS_863PX), SCREW 6G x 30MM SELF DRILL TORX 410 (SPEC_997025), 6-32 X 3/8 PAN X T/23 T/C
ZP (TCSZ_63238PX), 1 X 6 PAN X S/S S/T SCREWS (STSS_61PX), M8 X 19 X 2.5 S/S WASHER
(SSW_M81925)
7
359 1
Shelf Comprising of: M10 X 30 X 2.7 WASHER M/G (STWZ_M103027M), M8 X 30 HEX SET SCREW M/G
(SSH_M830MG), M6 x 40mm BUTTON STARDR POST S/S (MTSS_M640PTP), M6 X 50 SPEC SQ HEAD BOLT
M/G (SPEC_B143), M6 X 25 HEX SET SCREW M/G (SSH_M625MZ), M8 x 30 CSK HD STAR DRIVE MTS ZP
(MTSZ_M830CT), M6 CAGE NUT SUPA ZINC SMY06171448 (CLIP_M6CAGESZ), M6 X 50 SPEC SQ HEAD
BOLT M/G (SPEC_B143), M6 X 40 SPEC T BOLT DWG M/G (SPEC_B189), M5 X 10 BUTTON STARDR S/S R/S
(MTSS_M510BTC1), M8 NORDLOCK WASHER 316 S/S (SSW3_M8NORDSS), M6 X 20 SPEC SCREW TO
DWG B/Z (SPEC_B209), M6 x 35mm PAN HD STARDR POST MTS S/S (MTSS_M635PTP), M6 X 15 " T " BOLT
TO DWG S/S (SPEC_RHINO12), M6 X 20 SPEC SCREW TO DWG B/Z (SPEC_B209), M6 x 20mm PAN HD
STARDRIVE POST MTS S/S (MTSS_M620PTP), M6 x 25mm BUTTON HD HEX POST (5MM) S/S
(CAPS_M625BP5L), M8 X 19 X 2.5 S/S WASHER (SSW_M81925), M6 X 25 SPEC SCREW TO DWG M/G
(SPEC_B090), M6 X 55 BUTTON POST 5MM S/S (CAPS_M655BP5L), M6 X 25 SQHD BOLT DWG M/G
(SPEC_B015), M8 X 19 X 2.5 S/S WASHER (SSW_M81925), M6 X 44 SPEC BOLT TO DWG M/G
(SPEC_RHINO16), M6 X 45 BUTTON POST 5MM S/S (CAPS_M645BP5L), M6 X 20 BUTTON POST 5MM S/S
(CAPS_M620BP5L), M6 x 35mm PAN HD STARDR POST MTS S/S (MTSS_M635PTP), M6 X 12 BUTTON POST
5MM S/S (CAPS_M612BP5L), M5 X 8 BUTT STARDR TRILOBE R/F (TAPT_M58BTC10), M6 X 16 HEX S/S SET
SCREWS (SSHS_M616), M6 x 25mm MUSH HD WASHER HEX SER MTS S/S (MTSS_M625MWSS), M4 X 25
BUTTON STARDR S/S SCR (CAPS_M425BT), M6 X 14 BUTTON HEX S/S 4MM A/F (CAPS_M614BH4), M6 x
23mm BUTTON HD POST 5MM S/S (CAPS_M623BP5L), M6 X 30 SPEC 8.8 SCREWS B/Z (SPEC_B221), M10
HEX STEEL NUTS M/G (NUT_M10SSMZ), M6 X 40 SOCKET CAP SCRSS P/LOC (SPEC_B033T), M4 x 10mm
CSK HD STARDRIVE (T-20) S/S (MTSS_M410CSS), M4 X 5 BUTTON STARDR SERR ZP (MTSZ_M45BTSZ)
7
Folio 18 of 32
LOT QTY DESCRIPTIONRISK
CODE
360 1
Shelf Comprising of: STWZ_3161216Y (3/16 X 1/2 X 16 FLAT WASH Z/Y), STWZ_38116BZ (3/8 X 1 X 16 FLAT
WASHER B/Z ) STWZ_5167816 (5/16 X 7/8 X 16 FLAT WASHER ZP ), SPWZ_3818332Y (3/8 X 1/8 X 3/32 FLAT
SPR Z/Y), STWZ_3161220 (3/16 X 1/2 X 20 FLAT WASHER ZP ), STWZ_143416G (1/4 X 3/4 X 16 FLAT WASH
GAL), SPWZ_18364132 (1/8 X 3/64 X 1/32 SPR WASH ZP ), STWZ_5165816M (5/16 X 5/8 X 16 STEEL
WASHERMZ ), STWZ_4BA (4BA FLAT WASHER ZP ), STWZ_1491618B (1/4 X 9/16 X 18 FLAT WASH B/Z ),
STWZ_5165818M (5/16 X 5/8 X 18 FLAT WASH M/Z)
7
361 1
Shelf Comprising of: STWZ_358437 (3.5 X 8.43 X .7MM FLAT WASH ZP ), SPWZ_M3Y (M3 FLAT SECT
SPRING WASHER Z/Y ), SPWZ_M5Y (M5 FLAT SECT SPRING WASHER Z/Y), SPWZ_M5SQ (M5 SQUARE
SECT SPRING WASH ZP), SSHT_M1020IHY (M10 X 20 X 1.25 IHW 8.8 Z/Y ), STWZ_M6182
(M6X15.7/16.0X1.79/2.0 WSH ZP), STWZ_M20TG (M20 SQUARE TAPER WASHER GAL), SPWZ_M6Y (M6
SPRING WASHER Z/Y), SPWS M6G (M6 SPRING WASHERS ZP ) BHT_MF1050Z (M10 X 50 HEX 1.25 H/T
BOLT ZP ), SSHT_MF1060BZ (M10 X 60 1.25P H/T SET SCR B/Z ), SSHT_MF1230P (M12 X 30-1.25 HEX H/T
SET PLN ), STWZ_M10TP (M10 SQUARE TAPER WASHER PLN ), STWZ_M16504G (M16 X 50 X 4MM FLAT
WASH GAL ), SPWZ_M10SQMG (M10 SQUARE SECTION SPR WASH MZ), STWZ_M101342 (M10 X 1 3/4 X
2MM FLAT WASH ZP ), BHT_MF20100Y (M20 X 100 X 1.5 HEX H/T BOLT ), SPWZ_3818332 (3/8 X 1/8 X 3/32
FLAT SPR Z/Y )
7
362 1
Shelf Comprising of: M8 X 30 SPEC PAN H/T 690308 (SPEC_690308), 1/2 X 6/32 PAN X M/T SCREW Z/Y
(SPEC_M1199), 10-24unc x 1/2 FILL HD X/R MTS TRIV Z/Y (SPEC_M1683), M8 X 35 S/S SOCKET CAP
SCREW A-480 (SPEC_M3350), 1 INCH BSP BRASS LOCK NUTS (NUT_B1BLP), M8 X 35 S/S SOCKET CAP
SCREW A-480 (SPEC_M3350), 1/2 X 10/24 FILL X S/S M/T SCR (MTSS_102412FX), 6-32 x 3/8 SPEC PAN HD
COMB MTS N/P (SPEC_M632), 3/8 X 6/32 SPEC PAN COMB S/S (SPEC_M2502), 42MM X 4MM SPEC DWG
690782 (SPEC_690782), 3/8 X 8/32 PAN COMB M/T SCR NP (SPEC_M800), 8-32unc x 1/4 PAN HD COMB MTS
STEEL NP (SPEC_M801), 6-32unc x 7/16 PAN HD X/R MTS Z/Y (SPEC_M1300), M5 x 20mm CSK HD X/R MTS
8 MICRON ZP (SPEC_MS805-20), 10-24 x 7/16 PAN HD X/R MTS S/S (SPEC_M3284), SPEC_M2930, 5/8 X 5/16
"T" NUTS PRONG ZP (TNUT_W51658PP), 3/8BSW "T" NUTS 4 PRONG (TNUT_W384PP), 1/4 X 2 U DRIVE
SCREWS ZY (UDRI_214Z), 5/16 X 3/8 "T" NUTS ZP (TNUT_W516Z), 3/8 SLAB TEE NUTS ZP
(TNUT_M10SZP), M8 X 9MM SHAFT LENGTH T NUT ZP (TNUT_M89Z), 7/16 X 10/24 PAN X M/T SCR Z/Y
(SPEC_M1130), 32MM FULL CONDUIT SADDLE GALVA (GEN_32CSG), 32MM FULL CONDUIT SADDLE
GALVA (GEN_32CSG), 12MM STL CONDUIT FULL SADDLE Z (GEN_12CSZ), 1/2 EXT STAR WASHER ZP
(STAR_12EZ), 5/16 EXT STAR WASHER Z/Y (STAR_516EZY), Tooth Lock Washers Zinc Plated 5/16 External,
1/4 INT STAR WASHER ZP (STAR_14IZ), Tooth Lock Washers Zinc Plated 5/32 Internal, Tooth Lock Washers
Zinc Plated M20 Internal, 10-24 x 1-1/2 FILL HD X/R M/T SCREW Z/Y (SPEC_M1677), Tooth Lock Washers Zinc
Plated M5 External, Tooth Lock Washers Zinc Plated M6 External, Tooth Lock Washers Zinc Plated M8 External,
Tooth Lock Washers Zinc Plated M10 Internal, 2MM INT STAR WASHER ZP (STAR_M2IZ), M4 INTERNAL STAR
WASHER Z/Y (STAR_M4IY), 4 X 7/8 UNC PLOW BOLT PLN (PLOW_C784PB)
7
363 1
Shelf Comprising of: 1 3/4 X 12 CSK X "A" S/T SCR (STSP_12134CXA), 40MM X 10 "A" Security "H" ON
(STSP_1040SH), 33.5 X 12 Trwing Screws ZP (STSZ_12335), 33.5 X 12 Triwing Screws ZP (STSZ_12335TRI),
21MM X 10 Pan Pozi "A" S/T ZP (STSZ_1021PPA), 1 X 5/16 HEX S/T Screws ZP (STSZ_5161H), 1 X 10 Pan
STARDR Post S/T ZP (STSZ_101PTP), 5/16 X 10 Pan Comb "B" S/T ZP (STSZ_10516PCB), 25MM X 12 Pan X
"A" S/T Z/Y (STSZ_1225PXAY), 2 X 12 Pan Pozi "A" S/T PLN Milperra (STSP_122PPA), 2 1/2 X 18-9 Butt
STARDR POSTM (STSZ_18212PBM), Pan Head Phil Type AB 1-1/2 ZP CR3+, 1 1/2 X 10 CSK X S/T Screws ZP
(STSZ_10112CX), 1 1/2 X 12 CSK X "A" S/T SCR (STSP_12112CXA), 3/4 X 14 RSD Slot S/T Screw ZP
(STSZ_1434OS), Pan Phillips Head Self Tapping Screws 10AB x 5/8"
7
364 1
Shelf Comprising of: 5/8 X 8 CSK X S/T SCREWS ZP (STSZ_858CX), 5/8 X 8 CSK X S/T SCREWS NP
(STSZ_858CXNP), 5/8 X 6 CSK X S/T SCREWS ZP (STSZ_658CX), 8-15 x 3/4 CSK HD X/R "A" STS 45' NP
(STSZ_834CXAN), 1 1/2 X 8 CSK X U/C S/T SCR ZP (STSZ_8112CXU), 1 1/2 X 8 PAN X S/T SCREWS F/B
(STSZ_8112PXFB), 3/4 X 8 PAN X S/T SCR STANGAL (STSZ_834PXSG), 5/8 X 8 PAN POZI S/T SCREW ZP
(STSZ_858PP), 3/4 X 8 CSK X U/C S/T SCR ZP (STSZ_834CXU), 1 3/8 X 8 RSD X S/T SCREWS NP
(STSZ_81380XNP), 30MM X 8 PAN X WASH"Z" S/T B/Z (STSZ_830PXWB), 1 X 8 CSK SQDR S/T SCR 7# ZY
(STSZ_81CSQ7Y)
7
365 1
Shelf Comprising of: 1 1/4 X 6 CSK X S/T SCREWS ZP (STSZ_6114CX), 8-18 x 3/8 SPEC PAN X/R TYPE 'B'
Z/P (STSZ_838PXB), 3/4 X 4 CSK X S/T SCREW Z/Y (STSZ_434CXY), 8-18 x 1/4 PAN HD X/R TYPE "B" STEEL
B/Z (STSZ_814PXBBZ), 1/4 X 6 CSK X S/T SCREWS ZP (STSZ_6144CX), 1 1/4 X 4 CSK X S/T SCR B/Z
(STSZ4114CXBZ), 5/8 X 5 CSK X S/T U/C ZP (STSZ_558CXU), 5/8 X 5 CSK X S/T SCREW ZP (STSZ_558CX),
11MM X 8 MUSH X S/T SCR BZ DWG (STSZ_811MX11), 1/2 X 8 CSK X S/T SCREW 6# BZ (STSZ_812CX6BZ),
11MM X 8 MUSH X S/T SCR BZ DWG (STSZ_811MX11)
7
366 1
Shelf Comprising of: M6 X 40 Pan X M/T Screws B/Z (MTSZ_M640PX), M6 X 35 CSK X M/T Screws ZP
(MTSZ_M635CX), M6 x 16mm Mush HD Comb MTS ZP (MTSZ_M616MC), M6 x 20 Pan Phil Steel Zinc, M6 X 75
Mush Combo M/T Screw ZP (MTSZ_M675MC), M6 x 25mm Mush HD Comb MTS ZP (MTSZ_M625MC), M8
x16mm IND Hex HD Wash SERR MTS ZY (MTSZ_M816IHWS), M6 X 40 Pan X M/T Screws B/Z
(MTSZ_M640PXBZ), M6 X 45 Mush Comb M/T Screw ZP (MTSZ_M645MC), M6 X 20 Mush Comb M/T SCR M/Z
(MTSZ_M620MCMG)
7
Folio 19 of 32
LOT QTY DESCRIPTIONRISK
CODE
367 1
Shelf Comprising of: M4 X 12 Pan X M/T Screws ZP (MTSZ_M412PX), M5 X 6 Pan X Nib M/T Screw ZP
(MTSZ_M56PXN), M5 X 6 Pan X M/T Screws ZP (MTSZ_M56PX), M5 X 30 Pan X M/T Screw ZP (MTSZ_M530PX)
M6 X 12 Spec Flat Combo SERRBZ (MTSZ_M612FHCB), M4 X 8 CSK X M/T Screws ZP (MTSZ_M48CX), Metal
Thread Pan Phil Mild Steel M5 X 12, M4 X 50 Pan X W/Face M/TSPECZ (MTSZ_M450PWX), M4 X 6 Pan Comb
M/T Screws NP (MTSZ_M46PCN), M4 X 12 Pan X Nib M/T Screw ZP (MTSZ_M412PXN), M5 X 8 Pan STARDR
Steel SCR ZY (MTSZ_M58PTY), M4 X 12 Pan X Nib M/T Screw ZP (MTSZ_M412PXN)
7
368 1
Shelf Comprising of: 1 X 3/16 CSK X M/T SCREWS ZP (MTSZ_3161CX), 2 1/2 X 3/16 MUSH COMB M/T ZP
(MTSZ_316212M), 1 1/2 X 1/4 MUSH COMB M/T ZP (MTSZ_14112MC), 1 X 1/4 MUSH COMB M/T SCREW ZP
(MTSZ_141MC), 2 3/4 X 1/4 MUSH X M/T SCR ZP (MTSZ_1423MX), 1 1/4 X 1/4 CSK X M/T SCREW ZP
(MTSZ_14114CX), 3/4 X 3/16 CSK X M/T SCREWS ZP (MTSZ_31634CX)
7
369 1
Shelf Comprising of: 10-32UNF x 1-1/4 PAN HD X/R MTS S/S (MTSS_1032114PX), 3/4 X 1/4 CSK X S/S M/T
SCREWS (MTS31434CX), 3 X 3/16 CSK X S/S M/T SCR 316 (MTS3_3163CX), 1 X 6/32 PAN X S/S SCREW 316
(MTS3_6321PX), 1 1/4 X 6/32 RSD X U/CUT S/S (MTSS_6321140X), 2 X 3/16 CSK X S/S M/T SCREW
(MTSS_3162CX), 2 1/2 X 3/8 RDHD S/S M/T 316 (MTS3_38212RS), 8 X 40MM LRG WAFER X T/C SCR Z
(TCSZ_840XLWZ), 8 X 1/2 PAN X STEEL T/25 ZP (TCSZ_812PX25), 8 X 40MM LARGE WAFER X T/C F/B
(TCSZ_840XLWFB), 8 X 40MM LRG WAFER X T/C SCR Z (TCSZ840XLWZ), 8 X 40MM LARGE WAFER X T/C
F/B (TCSZ_840XLWFB), 3/4 X 6/32 RSD X S/S SCREWS (MTSS_632340X), 5/8 X 6-32 CSK X S/S M/T SCREW
(MTSS_63258CX)
7
370 1
Shelf Comprising of: M3 X 8 PAN POZI S/S M/T 316 (MTS3_M38PP), M2.5 x 5mm CH HD COMBO MTS 316 S/S
(MTS3_M255CHC), 5/8 X 8 RSD X S/S S/T SCR 316 (STS3_858OX), M8 X 35 PAN SLOT S/S M/T 316
(MTS3_M835PS), M6 X 30 PAN X DIN 7985 S/S 316 (MTS3_M630OC), M3 X 30 PAN SLOT S/S M/T 316
(MTS3_M330PS), M4 X 16 PAN SLOT S/S M/T 316 (MTS3_M416PS), 1 1/2 X 8 RSD CSK X S/S S/T316
(STS3_8112OX), M8 X 40 PAN X S/S SCREW 316# (MTS3_M840PX), M6 X 30 PAN X DIN 7985 S/S 316
(MTS3_M630OC), M8 X 70 CSK SLOT S/S M/T 316 (MTS3_M870CS), 1 X 10 CSK RSD X S/S S/T 316
(STS3_101OX), 1 1/2 X 10 RSD CSK X S/S 316 (STS3_10112OX), M6 X 35 PAN X DIN S/S M/T 316
(MTS3_M635OC), 10-16 x 1 IND HEX HD WASH TYPE AB 316S/S (STS3_101IHW), 1 1/4 X 6 CSK X S/S S/T
316 (STS3_6114CX), 1 1/4 X 14 PAN X S/S S/T 316 (STS3_14114PX), M6 X 40 PAN SLOT S/S SCR 316
(MTS3_M640PS), 3/4 X 8 CSK X S/S S/T SCR 316 (STS3_834CX), 2 X 8 CSK X S/S S/T SCREWS 316
(STS3_82CX), M6 X 60 PAN X S/S M/T SCR 316 (MTS3_M660PX), M6 X 16 PAN X S/S M/T SCR 316
(MTS3_M616PX), 7/8 X 8 CSK X S/S S/T 10# 316 (STS3_878CX10), M8 X 16 PAN SLOT S/S M/T 316
(MTS3_M816PS), M6 X 80 MUSH W/HD X S/S SCR316 (MTS3_M680MWX), M8 X 40 SOC CAP 316 FULLY
THREADED (CAPS_M840SS31), M8 X 65 SOC CAP 316 FULL THREAD (CAPS_M865S316), 10-16 x 3/4 CSK
HD(8) S/DRI POST STS S/S (STS3_1034CTP8)
7
371 1
Shelf Comprising of: HEX SET SCREW M12 X 30, BUTTON SOCKET CAP SCREWS M8-1.25 X 25, SPRING
WASHER M6 X 11.8 X 1.6, STAINLESS HEX BOLTS M30 X 180, HEX BOLT M6 X 45, NUTS_M12316TT, M6 X
25 HEX S/S SET SCREWS 316 (SSH3_M625), HEX COACH SCREW M12 X 150, HEX BOLT M6 X 20, M8 X 65
HEX S/S SET SCREW 316 (SSH3_M865), M6 x 28mm CSK HD SOCKET MTS S/S 316 (CAPS_M628CS31),
BUMAX 88100.M6 X 16, STAINLESS COACH SCREWS 6MM X 30, M8 X 40 HEX S/S SET SCREW 316
(SSH3_M840)
7
372 1
Shelf Comprising of: HEX BOLT & NUT M8 X 70, M6 X 30 HEX BOLT GAL (BHS_M630G), M16 X 45 HEX BOLT
& NUT GAL (BNHS_M1645G), HEX BOLT & NUT KIT M20 X 50, HEX BOLT & NUT M12 X 30, HEX BOLT & NUT
M12 X 100, HEX BOLT & NUT M10 X 75, HEX BOLT & NUT M12 X 110, HEX BOLT & NUT M12 X 120, HEX
BOLT & NUT M10 X 75, HEX BOLT & NUT M16 X 100, HEX BOLT & NUT M8 X 35, HEX BOLT & NUT M12 X
200, HEX BOLT & NUT M12 X 60, HEX BOLT & NUT M20 X 120, HEX BOLT & NUT M12 X 65, HEX BOLT & NUT
M10 X 55, HEX BOLT & NUT M12 X 25, HEX BOLT & NUT M16 X 220, HEX BOLT & NUT M10 X 55, HEX BOLT
& NUT M8 X 70, M12 X 25 HEX BOLT & NUT GAL (BNHS_M1225G)
7
373 1
Shelf Comprising of: ZINC PLATE 4.8 Z/P B/N KIT M10 X 55, M20 X 140 HEX BOLT/NUT ZP (BNHS_M20140Z),
HEX BOLT & NUT M12 X 130, HEX BOLT & NUT M20-2.5X50, HEX BOLT & NUT M16 X 70, HEX BOLT & NUT
M24 X 150, HEX BOLT & NUT M16 X 65, HEX BOLT & NUT M16 X 200, HEX BOLT & NUT M12 X 110, HEX
BOLT & NUT M10 X 120, HEX BOLT & NUT M12 X 100, HEX BOLT & NUT M16 X 45, M10 X 90 HEX BOLT B/Z
(BHS_M1090BZ), HEX BOLT & NUT M10 X 75, HEX BOLT & NUT M20 X 75, HEX BOLT & NUT M16 X 110, HEX
BOLT & NUT M10 X 70, HEX BOLT & NUT M12 X 50, HEX BOLT & NUT M8 X 70, HEX BOLT & NUT M10-
1.5X65, HEX BOLT & NUT M12X150, HEX BOLT & NUT M10 X 30, HEX BOLT & NUT M16 X 80, HEX BOLT &
NUT M20 X 55
7
374 1
Shelf Comprising of: M5 X 10 BUTTON HEX POST S/S (MTSS_M510BHP), M4 X 10 BUTTON HEX POST S/S
(MTSS_M410BHP), M5 X 16 CSK STARDR POST S/S (MTSS_M516CTP), M6 X 20 CSK STARDR POST S/S
(MTSS_M620CTP), M5 X 20 BUTTON HEX POST S/S (MTSS_M520BHP), M4 X 16 CSK HEX POST S/S
(MTSS_M416CHP), M4 X 16 BUTTON HEX POST S/S (MTSS_M416BHP), M4 X 25 CSK STARDR POST S/S
(MTSS_M425CTP), M4 X 40 BUTTON HEX POST S/S (MTSS_M440BHP), M6 X 40 CSK STARDR POST S/S
(MTSS_M640CTP)
7
375 1
Shelf Comprising of: 5/8 X 3/16W HEX SET SCREW ZP (SSH_W31658Z), 1 X 5/16W HEX SET SCREW M/Z
(SSH_W5161MZ), 1 3/4 X 3/8W HEX SET SCREW ZP (SSH_W38134Z), 2 X 5/16 W HEX SET SCREW Z/Y
(SSH_W5162Y), 3 1/2 X 3/8 HEX COACH SCREW ZP (HCS_38312Z)
7
Folio 20 of 32
LOT QTY DESCRIPTIONRISK
CODE
376 1
Shelf Comprising of: METAL SDS HEX HEAD & WASHER #12-14 X 20, SELF DRILLING SCREW PHIL BUGLE
HEAD ZINC YELLOW 8-18 X 75, SELF DRILLING SCREW PHIL WAFER HEAD 10-24 X 16, SELF DRILLING
SCREW 8G-18X12, SELF DRILLING SCREW HEXAGON WASHER HEAD ZINC YELLOW 8-18 X 12,
DRYWALL SCREWS PHILLIPS HEAD 6 X 45, 10-16X16 WAFER X TEK SCR B/Z (TEKS_1016WXBZ), METAL
SDS FLANGED HEX HEAD #8-18X12, METAL SDS FLANGED HEX HEAD #10-16X16, SELF DRILLING
SCREW HEXAGON WASHER HEAD ZINC YELLOW 12-14X35, METAL SDS BUTTON WAFER #8-18X20,
METAL SDS HEX HEAD & WASHER #12-14X35, METAL SDS FLANGED HEX HEAD #8-18X12, METAL SDS
FLANGED WAFER HEAD #8-18X25, 8-18 X 25 CSK X TEK SCREW MG (TEKS_81825CXM), 12-14 X 75 HEX
TEK CLASS 4 (TEKS_121475H4), SELF DRILLING SCREWS PHILLIPS ZINC YELLOW 6-20X50, METAL SDS
COUNTERSUNK HEAD #8-18X32, METAL SDS FLANGED PAN HEAD #8-18X20
7
377 1
Shelf Comprising of: M5 X 35 CSK X S/S M/T SCR DWG (MTSS_M535CX4), M5 x 22mm PAN HD STARDR MTS
S/S (MTSS_M522PT), M5 X 30 CSK X SPEC SCREW S/S (MTSS_M530CXS), M5 X 30 CSK X SPEC SCREW
S/S (MTSS_M530CXS), M5 X 30 MUSH X S/S M/T SCREWS (MTSS_M530MX), M5 X 25 CSK X S/S M/T
SCREWS (MTSS_M525CX), M4 X 50 CSK X S/S M/T SCREWS (MTSS_M450CX), M4 x15mm SPEC MUSH HD
(10#) X/R MTS S/S (MTSS_M415MX), M6 X 45 CSK X S/S M/T SCREWS (MTSS_M645CX), M5 X 65 PAN SLOT
S/S SCREW (MTSS_M565PS), M4 X 12 PAN POZI S/S SCREW (MTSS_M412PP), M4 X 45 CSK X S/S M/T
SCREW (MTSS_M445CX), M5 x 25mm SPEC PAN HD (M4) X/R MTS S/S (MTSS_M525PXM4), M3 X 16 PAN X
S/S SCREW NBR2 (MTSS_M316PX2), M5 X 10 BUTTON STARDR S/S R-S (MTSS_M510BTRS), FLAT CSK HD
PHILLIPS M5 X 65, M5 X 18 PAN X DIN S/S MTS (M4 HD) (MTSS_M518OC4), M4 X 12 MUSH X S/S M/T
SCREWS (MTSS_M412MX), M4 X 30 CSK X S/S M/T SCREW (MTSS_M430CX), M5 X 18 PAN X DIN S/S MTS
(M4 HD) (MTSS_M518OC4), M6 X 55 PAN X S/S M/T SCREWS (MTSS_M655PX), M5 x 8mm PAN HD STARDR
MTS S/S (MTSS_M58PT), M5 x10mm SPEC PAN HD X/R NIBBED MTS S/S (MTSS_M510PCN), M5 x 8mm PAN
HD STARDR MTS S/S (MTSS_M58PT), M5 X 12 MUSH X S/S M/T SCREWS (MTSS_M512MX), M10 X 17
BUTTON TRILOBE DRIVE (MTSS_M1017BTR), M5 X 45 PAN X S/S SCREW (MTSS_M545PX), METAL
THREAD PAN PHIL M6 X 12, M5 X 12 PAN X S/S M/T SCREWS (MTSS_M512PX), M4 X 25 PAN X S/S
SERRATED (MTSS_M425PXS), M4 X 5 PAN X S/S M/T SCREWS (MTSS_M45PX), M3 X 4 PAN X SCREW S/S
(MTSS_M34PX)
7
378 1
Shelf Comprising of: STSS_612PSQ (1/2 X 6 PAN X SQDR S/S S/T SCR), STSS_438PSQ (3/8 X 4 PAN SQDR
S/S S/T SCREW), STSS_634PXSQ (34MM X 6PAN X SQDR S/S S/T SCR), STSS_834CSQ1 (3/4 X 8 CSK
SQDR S/S S/T SCREW), STSS_81CSQ6 (8-18 x 1 spec CSK HD (#6) SQDR STS S/S), STSS_81PSQ4 (8-18 x 1
PAN HD (4#) SQDR TYPE AB S/S), STSS_82PSQ (2 X 8 PAN SQDR S/S S/T SCREWS), STSS_81PSQPP (1 X
8 PAN SQDR S/S PILOT POINT), STSS_81O1W (1 X 8 RSD ONEWAY S/S S/T SCREW), STSS_1034CTP8 (10
x 3/4 CSK HD (#8) STARDR POST S/S), STSS_612PXSQ (1/2 X 6 PAN X SQDR S/S S/T SCR) STSS_634CSQ4
(3/4 X 6 CSK SQDR S/S S/T SC 4#), STSS_834CSQU (3/4 X 8 CSK SQDR S/S S/T SCREW) STSS_8114CSQ (1
1/4 X 8 CSK SQDR S/T SCR S/S), STSS_82PSQ (2 X 8 PAN SQDR S/S S/T SCREWS), STSS_658PSQ (5/8 X 6
PAN SQDR S/S S/T SCREW), STSS_634TSQ (6-20 x 34mm TRUSS HD SQ DR TYPE AB S/S), STSS_623TSQ
(6-20 x 23mm TRUSS HD SQDR TYPE AB S/S), STSS_8114CSQ6 (8-18 x 1 1/4 SPEC CSK HD SQDR T-AB
S/S), STSS_834CSQ6 (8-18 x 3/4 SPEC CSK(6#) SQDR TYPEAB S/S)
7
379 1
Shelf Comprising of: STSS_438PXB (3/8 X 4 PAN X "B" S/S S/T SCR), STSS_48PC (8MM X 4 PAN COMB S/S
S/T SCREW), STSS_630CX (30MM X 6 CSK X S/S S/T SCREW), STSS_814PXB (8-18 x 1/4 SPEC PAN X/R
TYPE "B" S/S), STSS_858CXU (5/8 X 8 CSK X U/C S/S S/T SCRE), STSS_81O1W (1 X 8 RSD ONEWAY S/S
S/T SCREW), STSS_6112PXW (1 1/2 X 6 PAN WAFER X S/S S/T), STSS_8516CXUB (5/16X 8 CSK X U/C
BLUNT PT S/S), STSS_6114PP (1.1/4 X 6 PAN POZI S/S S/T SCR), STSS_638PXB (6-20 x 3/8 PAN HD X/R
TYPE "B" S/S), STSS_838PX6 (8-18 x 3/8 PAN HD (6#) X/R TYPE AB S/S), STSS_716CXBZ (16MM X 7 CSK X
S/S S/T SCR B/Z), STSS_8214PP (2.1/4 X 8 PAN POZI S/S S/T CR), STSS_638CX8 (3/8 X 6 CSK X S/S S/T
SCRE 8#), STSS_1034PXBZ (3/4 X 10 PAN X S/S S/T SCR B/Z), STSS_638PX4 (3/8 X 6 PAN X S/S S/T SCR
4#), STSS_612PX4 (1/2 X 6 PAN X S/S S/T SCR 4##), STSS_6138MX (1 3/8 X 6 MUSH X S/S S/T SCREW),
STSS_834CXBZ (3/4 X 8 CSK X S/S S/T SCR B/Z), STSS_6112PXPP (6-20 x 1-1/2 PAN HD X/R P/P STS S/S)
7
Folio 21 of 32
LOT QTY DESCRIPTIONRISK
CODE
380 1
Shelf Comprising of: M6 X 50 BUTTON HEX POST S/S (MTSS_M650BHP), M8 X 50 BUTTON HEX POST S/S
(MTSSM850BHP), 1/2 X 10 CSK HEX POST A SS (STSS_1012CHPA), M4 X 10 BUTTON HEX POST S/S
(MTSS_M410BHP), M5 X 12 BUTTON STARDR POST S/S (MTSS_M512BTP), M5 X 12 BUTTON HEX POST
S/S (MTSS_M512BHP), 1 1/2 X 8 BUTT HEX POST A SS (STSS_8112BHPA), M5 X 16 BUTTON STARDR POST
S/S (MTSS_M516BTP), M6 X 70 MUSH W/HD STARDR POST (MTSS_M670MWTP), M5 X 16 BUTTON
STARDR S/S SCR (MTSS_M516BT), M6 X 50 CSK HEX POST S/S (MTSS_M650CHP), 3/4 X 6 BUTTON HEX
POST A SS (STSS_634BHPA), M6 X 25 CSK STARDR POST S/S (MTSS_M625CTP), M5 X 20 CSK HEX POST
S/S (MTSS_M520CHP), M5 X 25 BUTTON HEX POST S/S (MTSS_M525BHP), M5 X 16 CSK HEX POST S/S
(MTSS_M516CHP), M4 X 16 CSK HEX POST S/S (MTSS_M416CHP), 1 X 6 CSK HEX POST A SS
(STSS_61CHPA), M8 X 16 CSK HEX POST S/S (MTSS_M816CHP), M6 X 30 BUTTON HEX POST S/S
(MTSS_M630BHP), M6 X 30 CSK HEX POST S/S (MTSS_M630CHP), M5 X 30 CSK HEX POST S/S
(MTSS_M530CHP), 1 X 8 BUTTON HEX POST A SS (STSS_81BHPA), M8 X 40 BUTTON HEX POST S/S
(MTSS_M840BHP), M8 X 30 CSK HEX POST S/S (MTSS_M830CHP), 1 1/2 X 10 BUTTON HEX POST A S
(STSS_10112BHP)
7
381 1
Shelf Comprising of: 4 X 3/8 HEX COACH SCREW ZP (HCS_384Z), 3 1/2 X 3/8 HEX COACH SCREW ZP
(HCS_38312Z), 3 X 3/8 HEX COACH SCREW ZP (HSC_383Z), 5/8 X 3/16W HEX SET SCREW ZP
(SSH_W31658Z), 3/8 X 5/16W HEX SET SCREW ZP (SSH_W51638Z), 2 X 1/2W HEX SET SCREW ZP
(SSH_W122Z), 5/16W x 4" HEX HD SET SCREW ZP (SSH_W5164Z), 1 X 3/8W HEX SET SCREW ZP
(SSH_W381Z), 1 X 5/16UNC HEX SET SCREW ZP (SSH_C5161Z), 1 3/4 X 1/4W HEX SET SCREW ZP
(SSH_W14134Z), 1 X 5/16W HEX SET SCREW M/Z (SSH_W5161MZ), 2 1/4 X 3/8W HEX SET SCREW ZP
(SSH_W38214Z), M10 X 90 HEX COACH SCREW ZP (HCS_M1090Z), 2 1/2 X 5/16 HEX COACH SCR Z/Y
(HCS_516212Y), 58MM X 5/16IND HEX W/HD SCR ZY (HCS_51658Y), 1 X 5/16W HEX SET SCREW M/Z
(SSH_W5161MZ), M6 X 40 HEX COACH SCREW ZP (HCS_M640Z), 1 X 5/16 HEX COACH SCREW ZP
(HCS_5161Z), M6 X 40 HEX COACH SCREW ZP (HCS_M640Z), 5/8 X 3/16W HEX SET SCREW ZP
(SSH_W31658Z)
7
382 1
Shelf Comprising of: M5 X 25 SOCKET CAP SCREW S/S (CAPS_M525SS), M4 X 8 CSK SOCKET SCREW S/S
(CAPS_M48CSS), M8 X 55 BUTTON SOCK SCREW S/S (CAPS_M855BSSS), M8 X 45 SOCKET CAP SCREW
S/S (CAPS_M845SS), M8 X 35 SOCKET CAP SCREW S/S (CAPS_M835SS), M6 X 100 SOCKET CAP SCREW
S/S (CAPS_M6100SS), M6 X 35 BUTTON SOC SCREW S/S (CAPS_M635BSS), M6 X 30 BUTTON SOCKET
SCR S/S (CAPS_M630BSS), M6 X 30 SOCK CAP SCR S/S R/S (CAPS_M630SSBZ), M8 X 75 SOCKET CAP
SCR S/S (CAPS_M875SS), STAINLESS BUTTON SCREWS M10 X 30, M8 X 55 SOC CAP S/S FULL
THREADED (CAPS_M855SSFT), M5 X 15 CUP HD BOLT S/S NO HEAD MARK (BCHS_M515P), M8 X 20 S/S
CUP HD BOLTS (BCHS_M820), M5 x 15mm SQ NECK CUP HDs S/S HEAD MARKS (BCHS_M515), M8 X 35
S/S CUP HD BOLTS (BCHS_M835), M8 X 40 S/S CUP HD BOLTS (BCHS_M840), M8 X 45 CUP HEAD BOLT
S/S (BCHS_M845), M10 X 50 S/S CUP HD BOLT (BCHS_M1050), M8 X 100 S/S CUP HD BOLTS
(BCHS_M8100), M8 X 60 CUP HD BOLT S/S (BCHS_M860), M8 X 40 ROLL PINS S/S (ROLL_M840SS), M3 X 25
ROLL PINS S/S (ROLL_M325SS), M3 X 68MM S/S RCLIP HUMPBACK (CLIP_HPSS3)
7
383 1
Shelf Comprising of: 2 X 5/16 IND HEX WAS X S/S M/T (MTSS_5162IHWX), 2 X 1/4 RDHD S/S M/T SCREWS
(MTSS_142RS), 1 1/4 X 1/4 CSK X S/S M/T SCRE (MTSS_14114CX), 1 1/8 X 3/16 RDHD S/S M/T SCR
(MTSS_316118RS), 1/2 X 3/16 CSK X U/C S/S M/T (MTSS_31612CXU), 10-32UNF x 2 1/4 PAN HD X/R MTS S/S
(MTSS_1032214P), 3/4 X 1/4 CSK SLOT S/S M/T SCR (MTSS_1434CS), 2 X 1/4 CSK X S/S M/T SCREWS
(MTSS_142CX), 1 X 5/16 RDHD S/S M/T SCREWS (MTSS_5161RS), 1/2 X 3/16 CSK SLOT S/S M/T
(MTSS_31612CS), 5/8 X 5/32 RDHD S/S M/T SCREW (MTSS_53258RS), 2 X 5/16 PAN SLOT S/S M/T SCRE
(MTSS_5162PS), 1 X 5/16 CSK SLOT S/S M/T SCR (MTSS_5161CS), 1 1/4 X 1/4 PAN X S/S M/T SCRE
(MTSS_14114PX), 5/8 X 1/4 RDHD S/S M/T SCREWS (MTSS_1458RS), 2 X 3/16 MUSH COMB S/S M/T SCR
(MTSS_3162MC), 1/2 X 5/32 CSK X S/S M/T SCRE (MTSS_53212CX), 3/8 X 5/32 MUSH SLOT S/S M/T
(MTSS_53238MS), 1 X 3/16 MUSH X S/S M/T SCREWS (MTSS_3161MX), 2 X 3/16 PAN X S/S M/T SCREWS
(MTSS_3162PX), 1/2 X 1/4 RDHD S/S M/T SCREWS (MTSS_1412RS), 1 X 1/4 PAN X S/S M/T SCREWS
(MTSS_141PX), 1 3/4 X 1/4 RDHD S/S M/T SCREW (MTSS_14134RS), 4 X 1/4 CSK X S/S M/T SCREWS
(MTSS_144CX), 1/4 X 5/32 PAN X S/S M/T SCREW (MTSS_53214PX), 1 1/2 X 3/16 CSK SLOT S/S M/T
(MTSS_316112CS), 1 1/2 X 1/4 RSD CSK X S/S M/T (MTSS_14112OX), 3/4 X 3/8 RDHD S/S M/T SCREW
(MTSS_3834RS), 1/2 X 5/32 PAN X S/S M/T SCRE (MTSS_53212PX), 5/32BSW x 1/4 CSK HD SLOT MTS S/S
(MTSS_53214CS), 3 X 3/16 RDHD S/S M/T SCREWS (MTSS_3163RS), 1 1/2 X 1/4 RDHD S/S M/T SCREW
(MTSS_14112RS), 1 1/2 X 1/4 CSK SLOT S/S M/T (MTSS_14112CS), 3 X 1/4 CSK SLOT S/S M/T SCREW
(MTSS_143CS), 2 1/2 X 3/16 PAN X S/S M/T SCR (MTSS_316212PX), 1 1/4 X 3/16 RDHD S/S M/T SCR
(MTSS_316114RS), 3/4 X 3/16 RDHD S/S M/T SCR (MTSS_31634RS), 1 X 5/32 PAN COMB S/S M/T SCR
(MTSS_5321PC), 1/8BSW x 1/4 CSK HD SLOT MTS S/S (MTSS_1814CS), 3/16 X 1/8 CSK X U/C S/S M/T
(MTSS_18316CXU), 2 1/4 X 3/16 RDHD S/S M/T SCR (MTSS_316214RS), 1 1/4 X 1/4 CSK X S/S M/T 3/16
(MTSS_14114CX3), 1 X 5/32 RDHD S/S M/T SCREWS (MTSS_5321RS)
7
384 1
Shelf Comprising of: 4 X 1/2W HEX BOLT ZP (BHS_W124Z), 4 X 1/2W HEX BOLT ZP (BHS_W124Z), 2 1/4 X 3/8
W HEX BOLT ZP (BHS_W38214Z), 3 1/2 X 5/16W HEX BOLT Z/Y (BHS_W516312Y), 2 X 5/16W HEX BOLT &
NUT ZP (BNHS_W5162Z), 3 1/4 X 1/4W HEX BOLTS ZP (BHS_W14314Z), 5 X 1W HEX BOLTS TO DWG
(SPEC_SG37245A)
7
Folio 22 of 32
LOT QTY DESCRIPTIONRISK
CODE
385 1
Shelf Comprising of: M16 X 260 CUP HD BOLT & NUTGAL (BNCH_M16260G), M12 X 170 CUP HD BOLT & NUT
GA (BNCH_M12170G), M10 X 45 CUP HD BOLT GAL (BCH_M1045G), M12 X 180 CUP HD BOLT&NUT GAL
(BNCH_M12180G), M10 X 45 CUP HD BOLT GAL (BCH_M1045G), M6 X 60 CUP HD BOLT/NUT ZP
(BNCH_M660Z), M6 X 43 CUP HD BOLT ZP (BCH_M643Z), 1.3/4 X 1/4 CUP HD BOLT/NUT ZP
(BNCH_W14134Z), 17MM X 1/4 CUP HD BOLT P/LOCK (SPEC_004282), 3 1/2 X 5/16 CUP HD BOLT Z/Y
(BCH_W516312Y), 1.3/4 X 1/4 CUP HD BOLT/NUT ZP (BNCH_W14134Z), 5/8 X 1/4W CUP HD BOLT ZP
(BCH_W1458Z), 3 1/4 X 5/16 CUP HD BOLT ZP (BCH_W516314Z), M10 X 30 4.6 CUP HD R-FLAKE
(BCH_M1030RF), 2 1/2 X 3/8 HEX COACH SCREW B/Z (HCS_38212BZ), 1 X 5/16 CUP HD BOLT ZP
(BCH_W5161Z), M8 X 25 FLAT HD SQ NECK Z/P SC (BCH_M825FZ), 1/2 X 1/4 CUP HD BOLT ZP
(BCH_W1412Z), 2 1/4 X 3/8 CUP HD BOLT ZP (BCH_W38214Z), M10 X 70 CUP HD BOLT GAL
(BCH_M1070G), 1 1/4 X 1/4 CUP HD BOLT & NUT (BNCH_W14114Z), 1/2 X 5/16 CUP HEAD BOLT ZP
(BCH_W51612Z)
7
386 1
Shelf Comprising of: CLASS 8.8 HEX BOLTS M6X30, M6 X 25 8.8 H/T BOLT ZP (BHT_M625Z), CLASS 8.8 HEX
BOLTS M6X35, CLASS 8.8 HEX BOLTS M8X100, ZINC PLATED HEX BOLT M8X110, CLASS 8.8 HEX BOLTS
M8X110, ZINC PLATED HEX BOLT M8X100, M8 X 50 8.8 H/T BOLT ZP (BHT_M850Z), HIGH TENSILE 8.8
HEXAGON BOLTS M20 X 270, ZINC PLATED CLASS 8.8 HEX B/N KIT M20 X 90, PLAIN HEX B/N KIT M20 X
180, PLAIN HEX BOLTS M20 X 110, ZINC HEX BOLTS M20 X 100, CLASS 8.8 HEX BOLTS & NUTS M16 X 75,
CLASS 8.8 HEX BOLTS & NUTS M12 X 140, M12 X 60 HEX H/T BOLT G10.9 ZP (BHT_M1260G), PLAIN HEX
B/N KIT M14 X 80, ZINC PLATED HEX BOLT M10 X 80, CLASS 8.8 HEX BOLTS & NUTS M8 X 130, ZINC
YELLOW PASSIVATE FLANGED HEX BOLT M8 X 16, HEX SET SCREW M20 X 80, HEX SET SCREW M16 X
40, HEX SET SCREW M16 X 80, M6 X 100 8.8 H/T SET SCREW ZP (SSHT_M6100Z), HEX SET SCREW M6 X
45, HEX SET SCREW M5 X 20
7
387 1
Shelf Comprising of: 2 X 5/16UNC HEX H/T BOLT ZP (BHT_C5162Z), M24 H/T FLAT WASHER M/Z40M
(STWZ_M24HTMZ4), 4 1/2 X 1/4UNC HEX H/T BOLT PL (BHT_C14412P), 3/4 X 1/4 UNC HEX H/T SET ZP
(SSHT_C1434Z), M12 GOLD METRIC EYE BOLT BS427 (EYE_359012), 4 X 5/16 EYE BOLT/NUT WASH ZP
(EYE_W5164Z), 2 1/4 X 3/8UNC HEX H/T BOLT ZP (BHT_C38214Z), 25 X 29 DEE SHACKLE GAL
(HARD_230325), M10 EYE NUT ZINC (EYE_M10Z), 5/8 RATED LIFTING EYE BOLTS (EYE_W58RP), 2 1/2 X
7/8NC HEX H/T BOLT ZP (BHT_C78212Z), 1 1/2 X 3/8NC HEX H/T BOLT Z/Y (BHT_C38112Y), 5/8 X 3/8 UNC
HEX H/T SET SCRZ (SSHT_C3858Z), 3 1/2 X 9/16 NC HEX H/T BOLT Z (BHT_C916312Z), 1/4 X 32NB "U"
BOLT ZP (UBOL_1432NBZ), M10 X 25NB "U" BOLT GAL (UBOL_M1025NB), M27 X
1208.8BOLT/NUT2WASHERS (SPEC_AUST12), M27 X 1008.8 BOLT/NUT 2 WAS (SPEC_AUST11), M27 X
1108.8 BOLT/NUT2WA (SPEC_AUST10), M24X 13010.9 BOLT/NUT2WASHERS (SPEC_AUST8), M24 X
32010.9 BOLT/NUT2WASHERS (SPEC_AUST9), M24 X 65 10.9 BOLT/NUT2WASHERS (SPEC_AUST1), M24 X
75 10.9 BOLT/NUT2 WASHER (SPEC_AUST2), M24 X 85 10.9 BOLT/NUT2WASHER (SPEC_AUST4), M24 X 95
10.9 BOLT/NUT2WASHER (SPEC_AUST5), M24 X 10010.9 BOLT/NUT2WASHER (SPEC_AUST6), 9 X 3/4 UNF
HEX H/T BOLT/NUT (BNHT_F349P), 10 X 3/4 UNF HEX H/T BOLT (BNHT_F3410P), 1 1/2 X 5/16UNF H/T BOLT
ZP (BHT_F516112Z)
7
388 1
Shelf Comprising of: 1 1/4 X 3/16 PAN COMB M/T Z/Y (MTSZ_316114PC), 1 3/4 X 3/16 PAN COMB M/T SCR
(MTSZ_316134PC), ALLT_M20285G, M5 X 50 ALLTHREAD ZINC (ALLT_M550Z), 1/4 X 3/4 X 16 FLAT WASH
Z/Y (STWZ_143416Y), 5/32W WING NUT Z/YELLOW (WING_W532CFY), 3/16 WING NUTS Z/Y
(WING_W316CFY), 1 1/4 X 1/4 HEX SET SCREW ZY (SSH_W14114Y), 3/16 X 1/2 X 16 FLAT WASH Z/Y
(STWZ_3161216Y), 3/16 X 1/2 X 16 FLAT WASH Z/Y (STWZ_3161216Y), 1 X 3/16 PAN COMB M/T SCR Z/Y
(MTSZ_3161PCY), 65MM X 14 SPANDEK ASSEMBLY (SPEC_MATCH06), 3/16 X 1/16 X 3/64 SPRING W ZY
(SPEC_MATCH08), 3/16 BSW NUT ZY 332 AF 152 THK (SPEC_MATCH07), 3/16 X 3/4 X 16 FLAT WASHER ZY
(STWZ_3163416Y), 5/16 UNC NYLOC NUT ZINC YELLOW (NN_C516Y), 1 1/4 X 3/16 PAN COMB M/T Z/Y
(MTSZ_316114PC), 1/4 X 3/32 X 1/16 SPRING W ZY (SPEC_MATCH09), 5/16 X 1/8 X 3/32 SPRING WASHY
(SPEC_MATCH10), 1 5/8 X 3/16 MUSH COMB NIB ZY (MTSZ_316158MC), 3 X 5/16 LAG SCREW ZP
(LAG_5163Z), M8 x 20 HEX SET SCREW MG (SSH_M820MG), M10 x 30 HEX SET SCREW MG (), M16 X 40 8.8
H/T SET SCREW MG (SSHT_M1640MG), M3 X 20 HEX SET SCREW PLN (SSH_M320P), M6 X 50 HEX SET
SCREW Z/Y (SSH_M650Y), M12 X 50 HEX SET SCRW M/G (), M12 x 65 HEX SET SCREW MG
(SSH_M1265MG), M16 x 90 HEX SET SCREW M/G (SSH_M1690MG), M8 X 30 HEX SET SCREW M/G (), M5 X
10 IND HEX X SET SCREW ZP (SSH_M510IHXZ), M5 X 20 IND HEX SET SCR PLAIN (SSH_M520IHP), M6 X 25
DOME HEX SLOT SCR GAL (SSH_M625DHSG), M6 X 8 TRIM HEX X SET SCREW ZP (SSH_M68XZ), HEX SET
SCREW M12 X 60, SET SCREW M10 X 100, ZINC PLATED HEX SET SCREW M16 X 90, ZINC PLATED HEX
SET SCREW M12 X 75, ZINC PLATED HEX SET SCREW M12 X 90, ZINC PLATED HEX SET SCREW M12 X
100, ZINC PLATED HEX SET SCREW M12 X 35, ZINC PLATED HEX SET SCREW M12 X 20, ZINC PLATED
HEX SET SCREW M10 X 30, M10 X 16 HEX SET SCREW ZP (SSH_M1016Z), ZINC PLATED HEX SET SCREW
M8 X 65, M8 X 60 HEX SET SCREW ZP (SSH_M860Z), M6 X 55 HEX SET SCREW ZP (SSH_M655Z), HEX SET
SCREW M6 X 40
7
389 1
Shelf Comprising of: POP_73AS64 (73AS6-4 RIVET), POP_73AS68W (73AS6-8 RIVET WHITE), POP_73AS268
(73AS-2-68 RIVETS), POP_73AS44PO (73AS4-4 RIVET POTTERY), POP_ASLMG64 (73ASLMG6-4 L/FLANGE
MULTI GRIP)
7
Folio 23 of 32
LOT QTY DESCRIPTIONRISK
CODE
390 1
Shelf Comprising of: 73STS5-4 STEEL RIVET (POP_73STS54), 73STS4-2 AJAX RIVET (POP_73STS42A),
73AA6-4 ALL ALUM RIVET CNC (POP_73AA64), 73AA610 ALL ALUM RIVET BREMICK (POP_73AA610B),
73MS4-1 MONEL RIVET (POP_73MS41), 72MS5-4 CSK RIVET MONEL (POP_72MS54), 73MS6-2 MONEL
RIVET (POP_73MS62), SPEC DIRECT SCREW 3.5 X 13 CSK (SPECLOCK15), SPEC DIRECT SCREW 3.5 X 40
CSK (SPEC_LOCK05), 1/2 X 10/32 RDHD M/T SCREW ZP (MTSZ_103212RS), 8MM X 2BA MUSH POZI M/T
Z/Y (MTSZ_2BA8MPY), 75 X 12 BUGLE BATTEN SQ 316S/S (TCS3_1275BBSQ), 50MM X 14 IND HEX WASH
T/17 SS (TCSS_1450IHWH), 14g x 32mm BUGLE HD BATTON TYPE 17 S/S (TCSS_1432BBN), 922-SD CSK
COARSE SS 10-16X30 (POW_SDCC1030), 10-24 X 30 WAFER X TEK S/S (TEKS_102430WS), 70MM X 14 S/S
FURN SCREW T/17 (TCSS_1470FHSS), 2 X 14 BUTTON HEX "A" T17 S/S (TCSS_142BHA), 3/4 X 8 PAN SQ
DR S/S TYPE 17 (TCSS_834PSQ17), 3/4 X 8 PAN X S/S T/17 T/C SCR (TCSS_834PX17), 20MM X 10 BUTTON
STAR DR POST (TCSS_1020WTP1), 1 X 10 PAN X S/S T/C SCR T/17 (TCSS_101PX17), 1 1/4 X 8 L/WAFER X
S/S T/17 (TCSS_8114LWX), 1 1/2 X 10 PAN X S/S T/C 17 (TCSS_10112PX1), 100MM X 14 S/S FURN SCREW
T/17 (TCSS_14100FHS)
7
391 1
Shelf Comprising of: 5/32 x 3/8 SPEC OVAL HD PT STR 8 MIC Z/P (SPEC_0925M), 7/16 X 8 PAN X TYPE B S/T
SCRP (SPEC_0762M), 10-24 unc x13mm SPEC U/C CSK X/R MTS BZ (SPEC_SC20101), M4 X 7 CSK X U/CUT
S/S SCREW (SPEC_3B70061), M4 X 54 SPEC S/S SCREW DWG (SPEC_2000708M), M4 x 22mm CSK HD X/R
MTS S/S (SPEC_MS804SS), 50MM X 6 PAN STARDR S/T SCR ZP (SPEC_0682M), 3/4 X 8 PAN X S/T SCREW
BZ (SPEC_0731M), 8-32unc x 5/16 PAN HD X/R TYPE 23 8 MIC (SPEC_0675M), 1 X 6 CSK X S/T SCREW TO
DWG (SPEC_0603M), M8 THIN SHEET NUT SERT (SERT_M8TS), M5 EUROSERT L/FLANGE SPLINED
(SERT_M5SPLF), 3/8 THINSHEET NUTSERTS (SERT_38TS), 3/16 SPLINED NUTSERTS ZP (SERT_316TS),
M6 HEX NUT SERT 09688-00619 (SERT_M6H), M8 EURO SPLINED NUTSERT (SERT_M8EFS), M10 CLOSED
END L/F NUT SERT (SERT_M10CE), M10 ROOT NUTS M/Z (ROOT_M10MZ), M36 HEX LOCK NUT GALV
(NUT_M36SLG), 5/16W STEEL LOCKNUTS ZP (NUT_W516SLZ)
7
392 1
Shelf Comprising of: FRONTIER RESPIRATOR P2 (X20) (SAFE_FR7710), 10-24 X 1/2 MUSH COM NIB WHITE
(TCSZ_102412MW), TYPE 17 WOOD SCREW BUGLE HEAD 14-10 X 75, 1 X 3/16 CSK X S/S M/T WHITE
(MTSS_3161CXW), 8-18X12 HEX TEK C4 EVEN HAZE (TEKS_81812EH), 8-18X12 HEX TEK C4 NIGHT SKY
(TEKS_81812NS), DRYWALL SCREW PHIL BUGLE HEAD ZINC YELLOW 8-10 X 75, 40MM X 10 DRYWALL
LAMINATING (STRE_1040DWL), 50MM X 6 BUGLE HD DRYWALL ZY (STRE_650BCTY), 8 X 15 BUTTON "S"
POINT Z/P (STRE_815BZP), 41MM X 7-9 BUGLE X DRYWALL BLK (STRE_741BCTB), 9/64 LONG ARM ALLEN
KEY (KEYS_964LA), VARIOUS ALLEN KEYS
7
393 1
Shelf Comprising of: M12 LONG ARM ALLEN KEY (KEYS_M12LA), M5 SHORT ARM POST KEYS Z/Y
(KEYS_M5SAPY), M2.5 LONG ARM ALLEN KEYS (KEYS_M25LA), M4 DRILLED ALLEN KEYS Z/Y
(KEYS_M4SAP), M16 X 30 GRUB SCREW Z/P (CAP_M1630S), M24 X 50 GRUB SCREW ZP (CAP_M2450SZ),
M8 X 40 GRUB SCREW (CAP_M840SP), M10 X 16 GRUB SCREW ZP (CAP_M1016SZ), M8 X 20 GRUB
SCREW DOG POINT (CAP_M820SDP), M10 X 16 GRUB SCREW ZP (CAP_M1016SZ), M5 X 35 SOCKET
GRUB SCREW (CAP_M535SP), M12 X 35 BUTTON SOCKET SCREW (CAP_M1235BP), M12 X 30 BUTTON
SOCKET SCR M/G (CAP_M1230BMG), M10 X 45 BUTTON SOCKET SCREW Z (CAP_M1045BSZ), M10 X 65
BUTTON SOCKET SCR S/S (CAPS_M1065BSS), M8 X 30 BUTTON SOCKET SCREW (CAP_M830BP), M6 X 6
BUTTON SOCKET SCREW PLN (CAP_M66BSP)
7
394 1
Shelf Comprising of: M20 X 90 CSK SOCKET SCREW PLN (CAP_M2090CP), M16 X 45 CSK SOCKET SCR
M/Z40M (CAP_M1645CMZ), M10 X 90 CSK SOC SCREW M/G (CAP_M1090CMG), M12 X 40 CSK SOCKET
SCREW ZP (CAP_M1240CZ), M10 X 75 CSK SOCKET SCR PLN (CAP_M1075CP), M10 X 40 CSK SOCKET
SCREW NP (CAP_M1040CN), M6 X 30 CSK SOCKET SCR DRILOCK (CAP_M630CPL), M6 X 25 CSK SOCKET
SCR NP (CAP_M625CNP), M6 X 30 CSK SOCKET SCR DRILOCK (CAP_M630CPL), M5 X 20 LOW HEAD CAP
SCREW (CAP_M520LHP), M10 X 16 LOW HEAD SOC CAP SCR (CAP_M1016LHP), M20 X 140 SOCKET CAP
SCREW (CAP_M20140P), M16 X 150 SOCKET CAP SCREW (CAP_M16150P), M20 X 50 SOCKET CAP
SCREW (CAP_M2050P), M16 X 25 SOCKET CAP SCREW PLN (CAP_M1625P), M8 X 50 SOCKET CAP
SCREW B/Z (CAP_M850BZ), M3 X 12 SOCKET CAP SCREW (CAP_M312P)
7
395 1
Shelf Comprising of: M8 X 60 ROLL PIN PLAIN (ROLL_M860P), M3 X 22 ROLL PINS PLAIN (ROLL_M322P), M3
X 5 ROLL PINS PLN (ROLL_M35P), 1 X 1/8 ROLL PINS PLN (ROLL_181P), 1 X 5/32 ROLL PIN ZP
(ROLL_5321Z), 1/2 X 1/2NC GRUB SCREW (CAP_C1212SP), 5/16 X 3/8W GRUB SCREW (CAP_W38516SP),
5/8 X 3/8UNC GRUB SCREW ZP (CAP_C3858SZ), 5/8 X 1/4W CSK SOCKET SCREW (CAP_W1458CP), 5/8 X
1/4W CSK SOCKET CHROME (CAP_W1458CCP), 21MM X 3/16 CSK HEX SCREW ZY (CAP_W31621Y), 2 X
5/8 UNF SOCKET CAP SCREW (CAP_F582P), 1.5 X 75MM PACKER WHITE (POW_PPK01575), 3.2 X 75MM
PACKER BLUE (POW_PPK03275), 5.0 X 75MM PACKER RED (POW_PPK05075), 3/4 X 3/8NC SOCKET CAP
HOLY/MT (CAP_C3834HM), 6.4 X 75MM PACKER GREY (100) (POW_PPK06475), 1 1/4 X 10/32 SOCKET CAP
SCREW (CAP_1032114P), PLUMBERS ROOF & GUTTER WHITE (RAMS_53TRGW)
7
Folio 24 of 32
LOT QTY DESCRIPTIONRISK
CODE
396 1
Shelf Comprising of: 1/2 X 4 CSK X S/S S/T SCREWS (STSS_412CX), 1/2 X 4 PAN X S/S S/T SCREWS
(STSS_412PX), 3/4 X 4 CSK X S/S S/T SCREW (STSS_434CX), 1 1/4 X 4 CSK X S/S S/T SCREW
(STSS_4114CX), 3/8 X 6 CSK X S/S S/T SCREWS (STSS_638CX), 1/2 X 6 PAN X S/S S/T SCREWS
(STSS_612PX), 3/4 X 6 CSK X S/S S/T SCREWS (STSS_634CX), 1 X 6 PAN X S/S S/T SCREWS (STSS_61PX),
1 X 6 CSK X S/S S/T SCREWS (STSS_61CX), 1 1/4 X 6 CSK X S/S S/T SCREWS (STSS_6114CX), 1 1/2 X 6
CSK X S/S S/T SCREWS (STSS_6112CX), 1/2 X 8 CSK X S/S S/T SCREWS (STSS_812CX), 1/2 X 8 PAN X S/S
S/T SCREWS (STSS_812PX), 5/8 X 8 CSK X S/S S/T SCREW (STSS_858CX), 3/4 X 8 PAN X S/S S/T SCREW
(STSS_834PX), 2 X 8 CSK X S/S S/T SCREWS (STSS_82CX)
7
397 1
Shelf Comprising of: M8 X 65 DYNABOLTS (RAMS_M865), 3/8 X 8 BUTTON STARDR SERR S/T
(STSZ_838BTSN), 3/8 X 6/32 SPEC PAN COMB S/S (SPECM2502), M16 X 45 GR10.9 HEX H/T SET PL
(SSHT_M164510P), M20 X 100 HEX H/T BOLT GR 10.9 (BHT_M20100G1), 8 X 3/8 PAN X T/C T/25 SCR ZP
(TCSZ_838PX25), M10 X 135 MUNGO PLUG (RAMS) (RAMS_DUP10135), M10 X 100 MUNGO HEX ZYP
(RAMS_DUP10100) **END OF DOWNSTAIRS**
7
398 1
**START OF UPSTAIRS MEZZANINE** Shelf Comprising of: SPECIAL FEMALE PART B/Z TO DWG
(SPEC_EDI02), 2 X 8 PAN X S/T SCREWS ZP (SPEC_EDL79), M8 X 55 CUP HD 7-8MM SQ LTH ZP
(SPEC_STERNS10), M5 X 20 SHOULDER SCREW Z/Y (SPEC_SWIFT01), M5 X 25 SPEC SCREW TO DWG
ZP (SPEC_1005030), M6 X 60 SPEC T BOLT ZINC (SPEC_HARCR016), M6 X 30 HEX BRASS SPACER M/F N
(SPEC_TRANS060), M4 X 55 RSD X TRILOBE S/S DWG (SPEC_CF4705), M8 X 20 SPEC SCREW Z/Y TO
DWG (SPEC_565152), 2 X 5/32 MUSH WASH COMB M/T (SPEC_170164), 1 15/16 X 1/4 CHHD X SCREWS ZP
(SPEC_061320), M8 X 20 SPEC SCREW Z/Y TO DWG (SPEC_565152), 1 15/16 X 1/4 CHHD X SCREWS ZP
(SPEC_061320), 5/16 X 10 PAN POZI PSM SCR ZP (SPEC_84571), 1 15/16 X 1/4 CHHD X SCREWS ZP
(SPEC_061320), M8 X 16 SPEC SQUARE HD SCR M/G (SPEC_RHINO09), M3 X 10 SPEC CSK SCREW DWG
(SPEC_BUNDY01), M8 X 55 PAN X HEX SPEC BOLT ZP (SPEC_UNITED03), M8 X 55 PAN X HEX SPEC BOLT
ZP (SPEC_UNITED03), .215 X 3/8 ALUM CD PINS (SPEC_PARK19), M5 X 30 SPEC LOW HEX SET ZP
(SPEC_PARK23), M8 X 55 PAN X HEX SPEC BOLT ZP (SPEC_UNITED03), M8 X 15 SPEC SHOULDER SCR
ZP (SPEC_PARK02), 50MM X 14 SPEC POZI SCREW B/Z (SPEC_BASS01), 18MM X 5.46MM MUSH RIVET F/B
(SPEC_PARK1), 1/4 X 3/16 MUSH X SCREWS RF (SPEC_SCRW0534), 15MM X 14 PAN W/F X TYPE B S/T
(SPEC_SCRW0518), 3/4 X 6 PAN W/F X S/S S/T SCR (SPEC_SCRW0776), 15MM X 14 PAN W/F X TYPE B S/T
(SPEC_SCRW0518), 20MM X 10 PAN W/F X HI LO RS (SPEC_SCRW0711), 15MM X 14 PAN W/F X TYPE B
S/T (SPEC_SCRW0518), M3 X 9 PAN X S/S SCREW RS (SPEC_SCRW0706), BK PAJERO NUT Z/Y
(SPEC_SCRW0698), 20MM X 10 APN W/F X HILO BZ (SPEC_SCRW0516), 7.5MM X 10 PAN W/F HILO S/S
(SPEC_SCRW0509)
7
399 1
Shelf Comprising of: M12X24X1.6 STL WASH ZP PK100 (SPEC_LEGRAN11), 10-12 x 1 3/4 SPEC PAN HD X/R
TY17 S/S (SPEC_9041795), M12 HEX NUTS IN PKTS OF 100 ZP (NUT_M12SSZP), 12MM X 6 PAN X 410 S/S
TYPE B (SPEC_DDALUM36), 8MM X 6 PAN X 410 S/S TYPE B (SPEC_DDALUM37), 6-20 x 3/4 U/CUT CSK X/R
TYPE AB S/S (STSS_634CXU), 60MM X 6 PAN X S/S S/T 2" TH (STSS_660PX2), 6-20 x 3/8 SPEC U/CUT CSK
X/R TCS S/S (TCSS_638CXU), 3/16BSW x 7/8 MUSH HD(F/T) POZI MTS S/S (MTSS_31678MP ), 10MM X 6
PAN X S/S S/T SCR (SPEC_DDALUM01), 14.7 X 1/4 FLAT HD SPEC SCR SS (SPEC_DDALUM33), 12MM X
10/16 CSK X U/C 302 (SPEC_DDALUM18), 98MM O/ALL X 3/16 S/S HINGEPIN (SPEC_DDALUM06), 10-16 x
36mm PAN HD X/R TYPE B S/T S/S (SPEC_DDALUM38), 5/32 SQ PRESS NUTS .306-.312 Z (PRES_532SQZ),
1/8 x 7/8 MUSH HD SLOT MTS ZP (MTSZ_1878MS), 28MM X 3/16 MUSH POZI S/S M/T (MTSS_31628MP), 3/8
X 5/32 IND HEX WASH X U/C (MTSZ_53238IHX), 10-16 x 2 RSD CSK HD X/R TYPE AB ZP (STSZ_102OX), M5
X 35 PAN X U/CUT S/S SCR (TCSS_M535PXU)
7
400 1
Shelf Comprising of: 35MM X 10 CSK X CHIPBOARD SCR (SPEC_SBV9885), SPEC BOLT DWG SBV3004 B/Z
(SPEC_SBV3004), 46.5 X 12 SPEC CSK POZI A S/S (SPEC_SEBEL05), 15MM X 12 PAN POZI S/T SCR ZP
(SPEC_SBV9780), M8 X 30 SPEC SCREW TO DWG (SPEC_HA21335D), 19MM X 10 CSK POZI S/T SCR ZP
(SPEC_SB9150), 38MM X 14 SPEC S/S SCREW (SPEC_SBV5684), 3/4 X 1/4 FLAT HD SOC SCREW
(SPEC_SBV4310), 58MM X 10 CSK X CHIPBOARD ZP (SPEC_SBV7027), 12-11 x 38mm CSK HD POZI TYPE
17 Z/P (SPEC_SB8686), 38MM X 3/8 SPEC POINTED B/Z (SPEC_SBV2423), 18MM X 12 PAN POZI "A" SCR
B/Z (SPEC_SBV2888B), 25MM X 10 STARDR SPEC SCR ZP (SPEC_SBV6110), 14g x 28mm MAX PAN HD
POZI S/T S/S (SPEC_SB8833), 48MM X 12 HEX SOC DRIVE S/S ST (SPEC_SBV3467), 31MM X 14 RSD CSK
POZI "A" B/Z (SPEC_SBV3807), 38MM X 12 RSD STARDR RE/SLOT Z (SPEC_SB8886), 33.5MM X 12 RSD
CSK STARDR SPE (SPEC_SB8789), SPECIAL STARDR SCREWS ZP (SPEC_SB8826), 12MM X 10 MUSH
POZI SPEC B/Z (SPEC_SBV10952)
7
401 1
Shelf Comprising of: M8 TRIFOIL NUTS M/Z (SPEC_UNI01), SPECIAL RIVET TO DWG (SPEC_CH84324B),
3/8W ROOT NUTS ZP (ROOT_W38Z), M6 HEX STEEL NUTS Z/Y (NUT_M6SSZY), 1/4 SPEC HEX TRILOB ZP
(WAXED) (SPEC_HA211860), M8 X 45 8.8 H/T BOLT ZP (SPEC_HA204390), 1/4 SPEC HEX TRILOB ZP
(WAXED) (SPEC_HA211860), 10/24 SPEC WAFER HD SCREW ZP (SPEC_HA20421D), 3/4 X 1/4 IND HEX
SPEC TRILOBE (SPEC_HA20432D), 50MM X 5/16 SPEC SCREW TO DWG (SPEC_HA20425D), 1 3/4 X
3/8UNF G8 SET(HOT WAX) (SPEC_HA21313B), M5 SPEC SCREW TO DWG HA21248D (SPEC_HA21248d),
M5 SPEC SPIGGOT SCREW HA20331D (SPEC_HA203310), 8219 CIRCLIP (CLIP_8219)
7
Folio 25 of 32
LOT QTY DESCRIPTIONRISK
CODE
402 1
Shelf Comprising of: 1 1/2 X 1/4 RDHD M/T SCREWS ZP (MTSZ_14112RS), 5/8 X 1/4 RDHD M/T SCREWS ZP
(MTSZ_1458RS), 2 X 3/16 RDHD M/T SCREW ZP (MTSZ_3162RS), 1/2 X 5/16 RDHD M/T SCREWS ZP
(MTSZ_51612RS), 1 1/4 X 5/16 RDHD M/T SCREW ZP (MTSZ_516114RS), 1 3/4 X 3/16 CSK SLOT SCREW ZP
(MTSZ_316134CS), 1/2 X 1/4 CSK SLOT M/T SCR ZP (MTSZ_1412CS), 3/4 X 5/16 RDHD M/T SCREWS ZP
(MTSZ_51634RS), 5/8 X 1/4 CSK SLOT M/T SCR ZP (MTSZ_1458CS), 2 1/2 X 3/16 CSK SLOT M/T ZP
(MTSZ_316212CS), 5/8 X 1/4 CSK SLOT M/T SCR ZP (MTSZ_1458CS), 2 X 1/4 RDHD M/T SCREWS ZP
(MTSZ_142RS), 2 5/8 X 3/16 MUSH SLOT M/T SCR (MTSZ_316258MS), M3 X 20 CSK SLOT M/T SCREWS ZP
(MTSZ_M320CS), M3 X 10 CSK SLOT M/T SCREW ZP (MTSZ_M310CS), M4 X 20 PAN SLOT M/T SCREW ZP
(MTSZ_M420PS), M3 X 8 PAN SLOT M/T SCREW ZP (MTSZ_M38PS), M6 X 50 CSK SLOT M/T SCREW ZP
(MTSZ_M650CS), M2.5 X 8 CHHD M/T SCREWS Z/Y (MTSZ_M258CHY)
7
403 1
Shelf Comprising of: 1 3/4 X 5/32 RDHD M/T SCR ZP (MTSZ_532134RS), 3/8 X 3/16 RDHD M/T SCREWS ZP
(MTSZ_31638RS), 3/8 X 5/32 RDHD M/T SCREWS ZP (MTSZ_53238RS), 1/4 X 3/16 RDHD M/T SCREW ZP
(MTSZ_31614RS), 3/4 X 3/16 RDHD M/T SCREW ZP (MTSZ_31634RS), 1/2 X 5/32 RDHD M/T SCREW ZP
(MTSZ_53212RS), 1 1/2 X 1/8 CSK SLOT M/T ZP (MTSZ_18112CS), 1 1/2 X 1/8 CSK SLOT M/T ZP
(MTSZ_532112CS), 1 1/2 X 5/32 RDHD M/T SCR ZP (MTSZ_532112RS), 9/16 X 5/16 PAN SOLID RIVET
(RIVS_516916PP), 1 1/2 X 10 CSK SLOT S/T Z/Y (STSZ_10112CSY), 1/2 X 1/4 WELD STUD PLN
(WELD_1412P), 1 1/2 X 10 PAN SLOT S/T SCR PL (STSP_10112PS), 1 3/4 X 1/4 MUSH SOLID RIVET Z
(RIVS_14134MSZ), 11/16 X 3/8 PAN SOLID RIVET (RIVS_381116PP), 1.1/4 X 5/16 WELD STUD PLN
(WELD_516114P), 1 1/4 X 10 PAN SLOT S/T (STSZ_10114PS), 5/8 X 8/32 PAN X M/T SCREWS ZP
(MTSZ_83258PX), 1 3/4 X 1/4 MUSH SOLID RIVET Z (RIVS_14134MSZ), 3/4 X 5/16 FLAT HD STEEL RIVET
(RIVS_51634FP),
7
404 1
Shelf Comprising of: SUEDE SWAGGY GLOVE SMALL (SAFE_POS31S.S), COWHIDE RIGGER GLOVE BEIGE
MED (SAFE_PO31B.M), FRONTIER SAFETY SPEC SMOKE LEN (SAFE_FE006), NO:30 DOUBLE ENDED
DRILL BLACK (DRIL_9D30B), 90MM HASP & STAPLE ZP (GEN_ADHS1090)
7
405 1
Shelf Comprising of: M12 DROP IN ANCHOR LIPPED (RAMS_LPD12M25), 3/16 X 5/16 X 1/16 FIBRE WASH
(FW_31651611), 3/16 X 5/8 X 1/32 FIBRE WASHER (FW_31658132), 1/2 X 1 X 1/16 RED FIBRE WASHR
(FW_121116), 1/2 X 7/8 X 1/16 FIBRE WASHER (FW_1278116), 8/8 CAP & PAN WASH WHITE GLOSS
(SNAP_88PSCWG), 8/8 CAP & CSK WASHER MATT RED (SNAP_88SCRM), 8/8 CAP & CSK WASHER
PRIMROSE (SNAP_88SCPR), STEMFIX CAP BLACK (SNAP_STEMFIB), STEMFIX CAP WHITE
(SNAP_STEMFIW), 8/8 CAP & CSK WASH WHITE MATT (SNAP_88SCWM), STEMFIX CAP MIST GREY
(SNAP_STEMFIMG), 8/8 CAP & CSK WASH WHITE GLOSS (SNAP_88SCWG), 8/8 BEIGE BIFIX CAPS
(SNAP_88BBF), 6.5MM X 19 X 4.5 BLK WASH NYLN (NW_M6351945), 6MM HEX POST SECURITY KEY
(APEX_M6HEXKEY), 65 X 2.8 BRT FLAT HEAD 2KG (NAIL_65280002), 1/2 X 1/4 THUMB SCREWS ZP
(THUM_W1412Z), M4 X 12 X 1.2 NYLON WASHER (NW_M41212), 25 X 3.0 CONCRETE NAIL ZP 5KG
(NAIL_253CZ5KG)
7
406 1
**START OF SHOWROOM**
Drill Bits - Various, - Comprising of:
High Speed
7
407 1
Drill Bits - Various, Comprising of:
High Speed
Cobalt Jobber
Reduced Shank
7
408 1
Drill Bits - Various, Comprising of:
Square Drive
Phillips
Reduced Head
Impact Power
Power Bronze
Apex
Pozi Drive
7
409 1Drill Bits - Various, Comprising of:
Taps 7
410 1
Drill Bits - Various, Comprising of:
Bottom Taps
Intermediate Taps
Taper Taps
Metric Spiral Flute Taps
Gun Taps
7
411 1
Drill Bits - Various, Comprising of:
Hex Post Security
Magnetic Nutsetter
7
Folio 26 of 32
LOT QTY DESCRIPTIONRISK
CODE
412 1
Drill Bits - Various, Comprising of:
End Mills Long
Slot Drills Short
Centre
Slot Drills Long
Third Shank 2 Flute
Drill & Tap
Reamer
Morse Taper
Stub
Spot Weld
Apex Slot
7
413 1 Drill Bits - Various, Alpha & Smart Brand 7
414 1
Drill Bits - Various, Comprising of:
High Speed
Jobber
7
415 1 Drill Bits & Electrical Tape - Various, Red, Yellow, White & G/Y Colours 7
416 1 Various Products - Plumbers Tape, Safety Clothes 7
417 1
Drill Bits - Various, Comprising of:
29PCE SLIM DRILL SET 1/16-1/2
3 x 21 PIECE GOLD SERIES IMPERIAL DRILL SET
Tape
1 x 29PCE COBALT DRIL SET 1/16-1/2
7
418 1
Various Bits - Comprising of:
Permanent Markers
6 Volt Lantern Batteries
Hacksaw Blades
2, 7
419 1Bi-Metal Holesaws - Alpha, Sizes Including: 14mm, 21mm, 24mm, 27mm, 29mm, 33mm, 35mm, 37mm, 41mm,
45mm, 46mm, 52mm, 54mm, 55mm, 57mm, 92mm, 98mm, 100mm, 102mm, 7
420 1
Drill Bits - Various, Comprising of:
Eye Bolt Kits
Turnbuckles
Shackles
Screws
Hooks
Straps
7
421 1
Various Products - Comprising of:
6 x ZK713X50X914 60 S/BELT CLOTH (ABRA_50X91460)
10 x Aluminium Oxide Economy Roll
Eye Bolt Kit
7
422 1
Various Products - Comprising of:
8" 6.4MM CHAIN SAW FILE (FILE_901962AU)
HAZARD TAPE 75 X 75 BLK/YELL (TAPE_11492)
Gloves
Clawbolt Wedge Anchor's
7
423 1
Various - Comprising of:
Wiring Terminals
Flat Washers
Metric Star Washers
"E" Clips & Retainer Clips
Extension Springs
Clevis Pins
2, 7
424 1 Air Compressor Reel - 10MM X 15 MTR AIR & WATER REEL, 240PSI 7
425 1 Vacuum - Vacmaster, 1500W, 15L 2, 7
426 1
Various - Comprising of:
Grinding Discs
Cable Ties
Pliers
7
Folio 27 of 32
LOT QTY DESCRIPTIONRISK
CODE
427 18
Blades - Austsaw, Comprising of:
Rotary Hacksaw
Thin Kerf Timber Cutting Blade
Polycrystalline Diamond Blade
Continuous Rim Diamond
7
428 1
Drill Bits - Alpha, Comprising of:
XR-3 18MM
XR-3 26MM
XR-3 14MM
XR-3 8MM
XR-3 6.5MM
XR-3 12MM
XR-3 16MM
7
429 1
Drill Bits - Alpha, Comprising of:
5mm
6mm
6.5mm
8mm
10mm
12mm
13mm
14mm
7
430 1
Cutting Tools - Sterling, Comprising of:
Knives
Scissors
Pliers
Blades
Wrenches
Staples
Tape Cutter
7
431 1 Holesaws - Alpha, Various Sizes 7
432 1
Hook Clamps - Various, Comprising of:
Tri Wing Welded 8 x 50
Terminal Swage Fork & Toggle
Terminal Swage Fork
Swivel Eye & Eye
7
433 1
Clips - Various, Comprising of:
Lynch Pins
Shaft Locking Pins
Thread Repair Kit
R Clips
7
434 1
Cutting Tools, Various, Comprising of:
Saw Blades
12 x Scrapers
7
435 1 Various - Saddle Straps, Swage Buttons 7
436 1
Various - Comprising of:
8 x Lufkin 5m Tape
9 x Premier Fasteners 8m
9 x Premier Fasteners 10m
5 x Soldiering Iron
7
437 1
Various - Comprising of:
Gloves
Safety Vests
10 x Powerstick Adhesive Sealant
7 x Visrope Strips
7, 12
438 1 Bench Grinder - Abbott & Ashby, 6" Industrial, 240V 2, 7
439 1 Work Light - Precision. 160 LED, 240V 2, 7
440 1 Work Light - Precision. 160 LED, 240V 2, 7
441 1 Impact Drill - Hitachi, Cordless, 18V, WH18DSDL 2, 7
Folio 28 of 32
LOT QTY DESCRIPTIONRISK
CODE
442 5 Torch - Sterling, LED 2, 7
443 2 Air Rivet Gun - Alliance, AL-3101 7, 18
444 1 Impact Drill - Hitachi, DV 16V, 16mm 5/8' 2, 7
445 1 Impact Wrench - Heracles, 16V 1/2' Drive 2, 7
446 1
Various - Comprising of:
Tape
Socket Set
2 x Riveting Tool Kit
3 x Riveting Tool
7
447 1
Various - Comprising of:
Spanners
Wrenches
Pliers
10 x Trimming Knife
3 x Tackle Guard
20' Wirerope Cutter
7
448 1
Various - Comprising of:
Tap Wrenches
Pliers
Thread File
Screw Extractor Set
7
449 1
Sprays - Various, Comprising of:
77 x CRC 400GM 5.56 Lubricant
78 x Bondcover Aerosol Cans
7
450 l
Various - Fischer, Comprising of:
Injection Sleeves
Adhesive Glue
7
451 1
Various - Comprising of:
Spanners
2 x Crimped Wheel Brush
2 x Oval Light
2 x Raker Band Saw
7
452 1 Riveting Tool - Pull-Link, AS1, 17mm, Hydraulic 7, 20
453 1 Screw Driver - Muro, VL41, Multi-Purpose, 230V 2, 7
454 1 Radio - Hitachi, Cordless, UR 18DSDL 2, 7
455 1 Drill Bits - Various, Euroboor, Alpha & Sterling **END OF STOCK** 7
456 1
**START OF P & E**
Forklift - Crown, 45RRTT3214
DOM: Not Sighted, Assume Mid 1990's
Ride-On
Automatic Controls
Electric
Colour: White
Hours: Not Visible
2 Stage
Max. Lift Weight: 2040Kgs.
Max. Lift Height: 8130mm
Side Shift: Yes
Reach Truck: Yes
Solid Tyres
Tyre Condition: Poor
S/N: 1A162307R (START OF P & E)
1, 5, 17,
20, 21, 23,
26, 27
Folio 29 of 32
LOT QTY DESCRIPTIONRISK
CODE
457 1
Forklift - Nissan, H01A15
DOM: Not Sighted, Assume Mid 1990's
Ride-On
Automatic Controls
LPG
Colour: White
Hours: No Hours Sighted
2 Stage
Max. Lift Weight: 1500Kgs.
Max. Lift Height: 3000mm
Solid Tyres
Tyre Condition: Poor
Dual Axle Wheels
S/N: H01-003202
1, 5, 17,
20, 21, 23,
26, 27
458 1 Pallet Jack - Pilot, 2500kg 19, 20
459 1 Pallet Jack - K&K, 2500kg 19, 20
460 1 Picking Ladder - Bailey, Industrial 120kg Load Rate 7, 23
461 1 Picking Ladder - Bailey, Industrial 150kg Load Rate 7, 23
462 13 Trolleys - Stock & Box 7
463 1 Load Cell - Digi, DI-160, Steel Fabricated, Max 3000kg 7, 14
464 1 Pallet Racking - 11 Bays, 12 Uprights, 102 Crossbeams, 3048mm Orange 7, 13, 19
465 1 Pallet Racking - 9 Bays, 10 Uprights, 72 Crossbeams, 3048mm Orange 7, 13, 19
466 1 Pallet Racking - 9 Bays, 10 Uprights, 72 Crossbeams, 3048mm Orange 7, 13, 19
467 1 Pallet Racking - 10 Bays, 11 Uprights, 80 Crossbeams, 3048mm Orange 7, 13, 19
468 1 Pallet Racking - 10 Bays, 11 Uprights, 80 Crossbeams, 3048mm Orange 7, 13, 19
469 1 Pallet Racking - 10 Bays, 11 Uprights, 80 Crossbeams, 3048mm Orange 7, 13, 19
470 1 Pallet Racking - 15 Bays, 120 Uprights, 114 Crossbeams, 3048mm Orange 7, 13, 19
471 1 Downstairs Shelving - Steel Fabricated, 7 Tier, 582 Bays 7, 13, 19
472 1 Shelving on Mezzanine - Steel Fabricated, 7 Tier, 113 Bays 7, 13, 19
473 1 Mezzanine - 9m x 9m with Steel Safety Railing, Timber Floor, Steel Stairwell 2, 7, 13, 19
474 1 Electric Chain Hoist - Hitachi, Iron Door with Electric Control, 250kg Capacity, Steel Fabricated Safety Barrier 2, 7, 19, 23
475 1 Shelves & Racking - Inside Showroom 7, 13, 19
476 9 Racking - Inside Showroom, Yellow Steel 7, 13, 19
477 6 Packing Benches 7
Folio 30 of 32
LOT QTY DESCRIPTIONRISK
CODE
478 1
Office IT Contents - Downstairs, Comprising of :
2 x Screens
3 x Printers
2 PC's
3 x Label Printers
2 x Keyboards
2 x Desk Phones
1 x Cordless Phone
2, 7
479 1
Office Furniture - Downstairs, Comprising of:
2 x White Timber Laminate Cupboard
2 x White Timber Laminate Filing Cabinet
2 x Desk Chairs
2 x Steel Fabricated Cabinets
2, 7, 13
480 110 Marking Sprays - Various Colours 7
481 1
Cleaning Chemicals - Comprising of:
Fire Foam
Belt Grip
Degreaser
Anti-Spatter
Bleach
7, 12
482 1 Safe - Chubb, Steel Fabricated, Single Door, Keylock, 800mm x 800mm x 1650mm 7
483 1 Safe - Chubb, Steel Fabricated, Single Door, Keylock, 800mm x 800mm x 1650mm 7
484 1
Contents of Kitchen - Downstairs, Comprising of:
1 x Hoover Fridge
1 x Kettle
1 x Toaster
1 x Microwave
1 x Wooden Circular Table
3 x Chairs
1 x Steel Fabricated Cabinet
2, 7
485 12 **START OF UPSTAIRS**
Computer Monitors - Various Brands2, 7
486 8 PC's - Various Brands 2, 7
487 1
Contents of Server Room (Excluding Server), Comprising of:
Paper Shredder
2 x Label Printer
2, 7
488 11 Phone System - Desk Phones 2, 7
489 1
Furniture - Both Offices, Comprising of:
Desks
Cupboards
Filing Cabinets
Chairs
7, 13
490 1
IT Contents - Both Offices, Comprising of:
2 x PC's
4 x Monitors
2 x Keyboard's
1 x Laminator
1 x Label Printer
1 x Printer
2, 7
491 1 Furniture - Open Plan Area, 8 x Timber Laminate Workstation 7, 13
492 10 Chairs - Open Plan Area, Fabric Upholstery 7
493 1 Compactus - Grey, 6 Drawer, Steel Fabricated, On Rollers 7, 13
494 49 Filing Cabinets - Various Sizes (Excluding Contents) 7
Folio 31 of 32
LOT QTY DESCRIPTIONRISK
CODE
495 1
Contents of Kitchen - Upstairs, Comprising of:
1 x Microwave
1 x Fridge 300L Volume
1 x Kettle
1 x Nespresso Machine
2, 7
496 1
Contents of Boardroom - Upstairs, Comprising of:
4 Door Wooden Cabinet
5 x Chairs
1 x Timber Table
1 x White 4 Door Cabinet
7
Folio 32 of 32
top related