amirhho srl quotation and specification -- 50kw...
Post on 18-Apr-2018
226 Views
Preview:
TRANSCRIPT
AMIRHHO SRL
Quotation and specification -- 50kw Hydrogenset
50kw HYDROGEN generator, below is price and specification
Machine Name Quantity/set Unit price/ EUR Total/EUR
50kw Hydrogenset 1
Ocean freight
EXW Price
100% Autonomy Energy Plant Energy Consumption 5 Kwatt magnetic engine .
Generator set technical parameters
LHNG50 Technical Data of Generator set
Model Number (Engine Type) LHNG50
Prime power/Standby power 40KW/50KW
Rated Speed 1500/1800RPM
Rated Frequency 50/60Hz
Rated Voltage 400V/230V
Phase AC 3-Phase, 4 wire
Voltage Stability ≤±2%
Voltage transient ≤±10%
Voltage Stable time ≤1
Heat consumption ≤9.8mj/kw.h
Lubricant consumption ≤1.63g/kw.h
Engine Capacity 8.58 L
Cylinder Number 6
Cylinder Bore 105mm
Stroke 125
Starting System DC 24V electic motor
Cooling method water cooler
Lubricant method Passive and flying lubricant
Isolation class H
Protection IP23
Alternator Siemens technology
Power Factor 0.8 lagging
Exciting method brushless
Color your choice
Certificates ISO 9001:2008, CE
Warranty 1 year or 1500 running hours
Type Open
Control system Automatic alarm system
Size 1650x720x1250mm
Weight 750kg
Delivery time 15 days
3. Work site requirements:
The work site needs to meet following basic requirements:
a) Ambient temperature between -40℃~40℃; b) Relative humidity less than 95%(35℃); c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required.
4. Fuel gas requirement: The generator set will be able to output at its full power with fuel gas with the specification as below: 1m distance away from generator set’s pressure regulating valve of inlet
① H2 content ≥ 70%
②Pressure of natural gas 80~200kPa, velocity of pressure≤ 1kPa/min;
③H2S≤20mg/Nm3;
④Moisture Content ≤40g/Nm3;
⑤ ; Impurities particle size≤5μm; impurity content≤30mg/Nm3;
Note:
Warranties: One year or 1000 running hours which comes first from generator set delivery date.
Payment terms: bank /credit card payment Commissioning: Customer needs to cover technicians’ round flying tickets, accommodation, food, local transportation and necessary communication costs (Eg. Internet access, mobile phone) Installation and commission of the generator set would be instructed assisted by OUR technicians, the charge would be 80 EUR/person/day. Operator training: Operator training would be conducted by OUR technicians during the process of commissioning or Factory training course in place , customer needs to cover round flying ticket, hotel cost, food, transportation in place.. Manufacturing lead time:The delivery period is within 15 days after down payment; Packing & shipping:
1) Generator set would be covered with plastic film cover ;
2) Control panel, batteries, electric cables are packed with plywood boxes;
3) Exhaust pipes, engine mufflers are put in the container without packing.
6.Machine parts
Product Reference Pic Quantity
Engine 1 pc
Common base 1 pc
Controller
(Optional:US Woodword)
control panel 1 pc
Regulator valve:
(optional:Italy MADNS:DN50)
Mixer
(Optional:US IMPOC:MT200)
Ignition Coil
(Optional:US Altronic)
Gear train 1 pc
Lubricating oil piping 1 set
Instrument 1 pc
Exhaust piping
Start-up power source
(including battery)
Alternator
Fire extinction muffler
Low voltage control cable
1 pc
1 set
1 pc
1 set 1 set
6. Spare parts list
Product Reference Picture Quantity
Oil filter 5 pcs
Sparking plug 2 pcs
cylinder sleeve 1pc
Piston ring 1 set
Adjusting screw 10 pcs
Cylinder head gasket 10 pcs
Waterproof rubber ring 1 set
Filler gauge 1 bunch
Pipe for CYL water
Lifter 2 pcs
Cross-bridge 2 pcs
silencer
Intake/Exhaust Valve
ignition coil ;
;
Sound and water proof container
Features: Noise level of sound proof type genset: About 75 dB(A) @3 meters location Well-formed and compact design, the big built-in muffler makes the noise lower Weather-proof, dust-proof, sound-proof, suitable for rigorous environment, according to IP23 All canopy parts are designed with modular principles and canopy materials use strong steel board All metal canopy parts are painted by electrostatic polyester powder paint Efficient air intake and exhaust system to ensure stable output Scientific design and advanced techniques to reduce noise level, noise-reducing materials and its covers further ensure sound attenuated efficiency and protection function Four doors with locks of canopy design are more convenient for the operation and maintenance also ensure the safety of gen-set more.
top related