advanced test equipment, 8275a mt druitt college of tafe department of electrical engineering

Advanced Test Equipment, 8275A

Mt Druitt College of TAFE

Department of Electrical Engineering

© Mike Stacey 204/21/23

Topics

Meter Readings Revision of current measurements using an analog

meter Draw a diagram of how to connect an ammeter in a

circuit containing a 10V dc source and a 1kΩ resistor – label your meter leads +ve and –ve

What settings should your meter have prior to turning on the power?

Please redo a couple of measurements from last week’s practical

© Mike Stacey 321/04/23

Current Measurements (ref p16 text)

© Mike Stacey 421/04/23

Meter connection [1]

When measuring current, the meter is connected in series with the circuit

© Mike Stacey 521/04/23

Meter connection [2]

© Mike Stacey 621/04/23

The ammeter is connected in series with the circuit

© Mike Stacey 721/04/23

Check polarity is correct

© Mike Stacey 821/04/23

Selecting the correct range

Begin with the range selector set to the maximum and then gradually wind it down until you have the greatest accuracy.

© Mike Stacey 921/04/23

Example connections

Meter Readings See page 3.10 workbooks

Resistance measurements

Find the indicated value of the meter for the following range settings: x1, x10, x100, x1k, x10k

Current measurements

Find the indicated value of the meter for the various current range settings