accord 1998 auto tranny diagram

94626

Acura 2.3CL 1998-99 B6VAAccord 1998-02 BAXA/MAXA 2.3L

Odyssey 1998 MDWA 2.3LPrelude 1997-01 M6HA 2.2L

-2-

CounterShaft

Main Shaft3rd & 4th

Counter ShaftBearing

Transmission Housing

ReverseIdlerGear

Reverse IdlerGear Shaft& Holder

Speed Sensor,Counter Shaft

MainShaftBearing

SecondaryShaft Bearing

SecondaryShaft1st & 2nd

Right Side Cover

-3-

Not used in Prelude New shaft lock nuts, torque to 123 ft. lbs. / 167 N•m

CounterShaft

MainShaft

SecondaryShaft

Note: Main shaft has left-hand threads

-4-

-5-

-6-

TORQUE: 12 N•m (8.7 lbf•ft)TORQUE: 44 N•m (33 lbf•ft)

Not used in Prelude

-7-

STANDARD: 12 - 25 Ω

STANDARD: 12 - 25 Ω

-8-

Acura 2.3CL 1998-99 B6VAAccord 1998-02 BAXA/MAXA 2.3L

Odyssey 1998 MDWA 2.3L

STANDARD: Approx. 5 Ω

Prelude 1997-01 M6HA 2.2L

STANDARD: Approx. 4.0-9.0 Ω

-9-

Line N or P No (or low) Torque converter, 850-910 kPa 800 kPa/120 psiline pressure ATF pump, pressure 120-130 psi

regulator valve,torque converter 900-960 kPa 860 kPa/130 psi*check valve 130-140 psi*

1st Clutch 1 No or low 1st 1st clutch 840-920 kPa 790 kPa/120 psipressure 120-130 psi

2nd Clutch 2 No or low 2nd 2nd clutchpressure

3rd Clutch D4 No or low 3rd 3rd clutch 890-970 kPa 860 kPa/130 psi*pressure 130-140 psi*

4th Clutch No or low 4th 4th clutchpressure

R Servo valve or 4thclutch

SHIFT LEVERPOSITION

FLUID PRESSURE

Standard Service LimitPRESSURE SYMPTOM PROBABLE CAUSE

*Odyssey only.

-10-

Acura 2.3CL 1998-99 B6VAAccord 1998-02 BAXA/MAXA 2.3L

Odyssey 1998 MDWA 2.3LPrelude 1997-01 M6HA 2.2L

BAXA, B6VA, MDWAClutch End Plate-to-Top Disc Clearance:

Service Limit:1st Clutch: 1.15–1.35 mm (0.045–0.053 in.)2nd Clutch: 0.7–0.9 mm (0.028–0.035 in.)3rd Clutch: 0.6–0.8 mm (0.024–0.031 in.)4th Clutch: 0.4–0.6 mm (0.016–0.024 in.)

M6HAClutch End Plate-to-Top Disc Clearance:

Service Limit:1st Clutch: 1.15–1.35 mm (0.045–0.053 in.)2nd Clutch: 1.0–1.2 mm (0.039–0.047 in.)3rd Clutch: 0.6–0.8 mm (0.024–0.031 in.)4th Clutch: 0.4–0.6 mm (0.016–0.024 in.)

If the clearance is not within the service limits, select a new clutch end plate from theappropriate table.

Shift Control Solenoid

Power Flow

-11-

Odyssey 1998MDWA 2.3L

Prelude 1997-01M6HA 2.2L

Acura 2.3CL1998-99 B6VA

Accord 1998-02BAXA/MAXA 2.3L

O-RING

BONDED

SOME OF THE INFORMATION IN THIS BOOKLET MAY HAVE BEEN PROVIDEDOR APPROVED BY THE AUTOMATIC TRANSMISSION SERVICE GROUP AND/ORTHE AUTOMATIC TRANSMISSION REBUILDERS ASSOCIATION. THE INFOR-MATION CONTAINED HEREIN IS ACCURATE TO THE BEST OF OUR KNOWLEDGE.WE ARE NOT RESPONSIBLE FOR ANY INACCURACIES OR WARRANTY CLAIMSWHICH MAY RESULT FROM THE USE OF THIS INFORMATION.

Acura 2.3CL 1998-99 B6VAAccord 1998-02 BAXA/MAXA 2.3L

Odyssey 1998 MDWA 2.3LPrelude 1997-01 M6HA 2.2L

3rd & 4th Clutch