abarth 500 2013 misc documents-blue and me user manual

2013 BLUE&ME Hands-Free Communication Users ManualVEHICLES SOLD IN CANADAWithrespect toanyVehiclesSoldinCanada, thenameChrysler Group LLC shall be deemed to be deleted and thename Chrysler Canada Inc. used in substitution therefore.DRIVING AND ALCOHOLDrunkendrivingis oneof themost frequent causes ofaccidents.Your drivingabilitycanbeseriouslyimpairedwithbloodalcohol levels far below the legal minimum. If you are drink-ing, dont drive. Ride with a designated non-drinking driver,call a cab, a friend, or use public transportation.WARNING!Drivingafter drinkingcanleadtoanaccident. Yourperceptionsarelesssharp,yourreflexesareslower,and your judgment is impaired when you have beendrinking. Never drink and then drive.This manual illustrates and describes the operation of fea-tures and equipment that are either standard or optional onthis vehicle. This manual may also include a description offeatures and equipment that are no longer available or werenot ordered on this vehicle. Please disregard any featuresand equipment described in this manual that are not on thisvehicle.Chrysler Group LLC reserves the right to make changes indesignandspecifications, and/or make additions toorimprovements to its products without imposing any obliga-tion upon itself to install them on products previously manu-factured.FIAT is a registered trademark of FIAT Group Marketing &Corporate Communication SpA, usedunder license byChrysler Group LLC.Copyright 2012 Chrysler Group LLCBLUE&ME Users Manual1-888-CIAO-FIAT (1-888-242-6342)CONTENTSOVERVIEW.............................5The BLUE&ME Hands-Free CommunicationPackage ..............................5Message Reader........................8Media Player .........................10Road Safety ..........................11DISPLAY AND BUTTONS ON THE STEERINGWHEEL...............................14Display .............................14Front Steering Wheel Buttons ..............14Rear Steering Wheel Buttons ..............15BLUE&ME HANDS-FREE COMMUNICATIONPACKAGE QUICK REFERENCE GUIDE.......21Prepare Your Mobile Phone Phonebook .......21Important Notes .......................22Try Out the Voice Commands..............22Pair Your Mobile Phone ..................23Making a Phone Call ....................24HOW TO USE BLUE&ME HANDS-FREECOMMUNICATION......................29Steering Wheel Controls..................29Voice Commands ......................29Display .............................34Audio..............................35BLUE&ME Hands-Free CommunicationFunction Menu ........................35BLUE&ME HANDS-FREE COMMUNICATIONFUNCTIONS ...........................38Making a Phone Call ....................39Incoming Calls........................44Managing Phone Calls ...................46Conference Call Function .................47MESSAGE READER FUNCTIONS ............48How To Read The Last SMS Text Received....49Inbox ...............................49Managing Messages ....................50Deleting All Messages ...................51SMS Notification Settings.................51MEDIA PLAYER FUNCTIONS ..............53How To Connect The USB Device/iPod ToBLUE&ME Hands-Free Communication .....53How To Manage The Media Library .........55Playing Audio Tracks....................60Practical Hints For Using The Media Player....632 BLUE&ME Users ManualSETTING FUNCTIONS....................65Pairing a Mobile Phone ..................65Managing User Data ....................70Advanced Options .....................74Media Player Settings ...................75BLUE&ME HANDS-FREE COMMUNICATIONSUPPORTED MOBILE PHONES .............78Mobile Phones With Bluetooth WirelessTechnology ...........................78Supported USB Memory Devices ...........79TROUBLESHOOTING....................92Hands-Free Communication Package ........92Message Reader.......................103Media Player.........................106iPod ..............................113SYSTEM SOFTWARE USE NOTICE ..........118END USER LICENSE AGREEMENT(EULA)...........................118GRANT OF SOFTWARE LICENSE. This EULAgrants you the following license: ...........119DESCRIPTION OF OTHER RIGHTS ANDLIMITATIONS ........................119UPGRADES AND RECOVERY MEDIA ......122INTELLECTUAL PROPERTY RIGHTS .......122EXPORT RESTRICTIONS ................123QUICK TIPS FREQUENTLY ASKEDQUESTIONS..........................125What Can I Do With My BLUE&ME Hands-FreeCommunication Package?................125BLUE&ME Users Manual 3BLUE&ME Hands-Free Communication Quick Tips ..........................125BLUE&ME Media Player Quick Tips .....127BLUE&ME Message Reader Quick Tips ...128BLUE&ME And The TomTom PND (PortableNavigation Device) (If Equipped) Quick Tips ..........................1284 BLUE&ME Users ManualOVERVIEWFIATsWindowsMobilebasedBLUE&MEHands-Free Communication is a personal telematics system thatincorporates communication and entertainment applica-tions that are expressly designed for use in your car.TheBLUE&ME Hands-Free Communication packageinstalled in your car is equipped with integral hands-freekit, messagereader, andmediaplayer. BLUE&MEisdesigned to support the future installation of additionalservices.TheBLUE&ME Hands-Free Communication packagefeatures integrated voice recognition, steering wheel con-trolsandamultifunctionelectronicdisplaythatallowsyou to use your Bluetooth wireless technology enabledmobilephonewithouthavingtotakeyoureyesofftheroad. You can even keep your phone in a pocket or a bag.You are not required to train the voice recognition systemto recognize your voice. The system is speaker indepen-dent and performs equally well for different users.With this system, you can also play your favorite musicstoredonaUSBstickor iPodandselect tracksandplaybackmodeswithbothvoicecommandsorbuttonson the steering wheel.This device complies withPart 15 of the FCCrulessubject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept all interference received,includinginterferencethatmaycauseundesiredop-erationThe BLUE&ME Hands-Free CommunicationPackageThe basic characteristic of this hands-free package isvoicerecognitionwithBluetoothwirelesstechnology.BLUE&ME Users Manual 5Withthissystemyoucanmakeandreceivecallssafelyand securely using either voice commands or buttons onthe steering wheel, under any driving condition, withouthaving to take your eyes off the road or removing yourhandsfromthesteeringwheel, asrequiredbycurrentlegal regulations.Bluetooth wireless technology enables wireless connec-tionbetweenyour mobile phone andthe hands-freepackage installed on your car.Tousethehands-freepackage, youneedaBluetoothwireless technology enabled mobile phone. This hands-free package gives you the possibility of interactingvocallywithyourmobilephonewhiledriving, evenifyour mobile device does not feature this capability. Youcan also interact with your mobile phone manually andvisually using the steering wheel controls and the instru-ment panel multifunction display.ForfurtherdetailsonthemobilephonessupportedbyBLUE&ME, refer toBLUE&ME SUPPORTED MO-BILE PHONES.To get started with BLUE&ME Hands-Free Communi-cationwithvoicerecognition, youhavetosimplypairyour Bluetooth wireless technology enabled mobilephone with the system.Pairingisanoperationthat hastobeperformedonlyonce.NOTE:During the mobile phone pairing procedure,BLUE&MEattempts todetect aphoneequippedwith Bluetooth wireless technology within range andthen establishes the connection using a Personal Iden-tification Number (PIN).6 BLUE&ME Users ManualOnceyourphoneispaired, youhavetheoptiontotransfer your mobile phone contacts to the hands-freepackage, tomakeaphonecall either byusingthecontacts list or directly pronouncing the phone num-ber, to answer a call, and also answer a secondincoming phone call.To interact with BLUE&MEyou can use eitherbuttons onthe steeringwheel or voice commands.With voice recognition, you can perform system func-tions by speaking voice commands, also identified askeywords. When the system recognizes a keyword,it will respond with the appropriate action. Voicerecognitionis aneasyandconvenient wayto useBLUE&ME.All the system functions are available within theBLUE&ME Main Menu. When you are travelling, youcaninteract withBLUE&MEusingbuttons onthesteering wheel or voice commands relevant only tophone functions (LAST CALLS and PHONEBOOK) andthe media player. To activate settings when travelling youcan only use voice commands.The hands-free package enables the following operations:Contactcallingbyvoiceyoucancall acontactinyour mobile phone phonebook using your voice. Youcan also call a contact in your phonebook by scanningthrough the entries on the multifunction display.(Tousethisoptionyouhavetotransferyourmobilephone contacts to the hands-free package phonebook).Digit dialing by voice you can dial a phone numberby pressing the Windows icon button (VR button) onthe steering wheel and speaking the digits to be dialed.Tocall a SMStext sender call the last SMStextsender directly or the sender of an SMS messagereceived and stored in the BLUE&ME inbox.BLUE&ME Users Manual 7To answer a call you can answer an incoming call bypressing the Phone/MENUbutton on the steeringwheel.Conferencecall you can call another contact whileyou are engaged in a phone conversation (ConferenceCalling is only supportedby a compatible mobilephone).Call waiting while engaged in a phone conversation,you can receive notification of another incomingphone call, answer the other incoming phone call, andswitch between two ongoing phone conversations.(Call waiting is only supported by a compatible mobilephone.)Refusing an incoming call or ending a call you canrefuse an incoming call or end a current call bypressingthePhoneHang-upbuttononthesteeringwheel.Withyourmobilephoneinthevehicleandthepairingprocedurecomplete, connect toyour mobilephonetoBLUE&ME and you can make phone calls by speakingkeywords or pressingbuttons onthe steeringwheel.When using the hands-free phone, the audio output of aphone conversation is heard through your cars speakers.Message ReaderThe BLUE&MEmessage reader enables automaticreading, through the car sound system, of the SMS textsyou receive on your Bluetooth wireless technologyenabled mobile phone that are received when the phoneis pairedandconnectedtoBLUE&MEsystem. Themessage reader does not provide access to messages thatwere received before you entered the car and connectedwiththeBLUE&MEsystem. Onlyasubsetofabbre-viations and emoticons are supported by theBLUE&ME system.8 BLUE&ME Users ManualNOTE: Not all mobilephones support theSMStextmessage reader function or automatic phonebook trans-fer via Bluetooth. Consult www.fiatusa.com for furtherinformation on the list of compatible mobile phones.Messagereader functionsaremanagedbythecontrolbuttonsonthesteeringwheel orbytheBLUE&MEvoice commands.The BLUE&ME message reader enables the followingoperations:To display on the instrument panel multifunctiondisplay a visual notification signal indicating that youhavereceivedanewSMStext onyour Bluetoothwireless technology enabled mobile phone, with send-ers number/name; BLUE&ME will also askwhethertoreadyouthemessagethat hasbeenre-ceived.Tomanage the list of SMStexts receivedonyourBLUE&ME paired mobile phone.NOTE: Onlymessages that were receivedwhile themobilephonewas connectedtoBLUE&MEwill belisted.Toreadthemessagesreceivedandstored. Messagescan be read multiple times.TocalltheSMStextsenderusingthebuttonsonthesteering wheel or voice commands.To delete individual messages or the entire inbox usingthe buttons on the steering wheel or voice commands.NOTE: Messages are to only be deleted by theBLUE&ME system and not by your mobile phone.BLUE&ME Users Manual 9TheBLUE&MEsystemcanalsorecognizeandreadabbreviations, if any (e.g., ILUVU will be read I loveyou) and can interpret most common emoticons (e.g., :-)will be read Smile), used today to write SMS texts.Media PlayerWith the BLUE&MEmedia player you can play, via thecar sound system, digital audio files stored on a USB stickor iPod by simply connecting it to the USB port locatedin the glove box of the car.Withthisfeature, youcanplayyourfavoritepersonalmusic collections while you drive.iPod player - refer to MEDIA PLAYER FUNCTIONS.Themediaplayer featureallows thefollowingopera-tions:Digital audio playback - you can play all your digitalaudio files (.mp3, .wma, .wav, .aac) or play a custom-ized playlist (.m3u or .wpl format).Audiofileselectionbycategory- youcanplayallaudio files of a certain category, e.g., album, artist orgenre.NOTE: Each audio file category must be tagged beforeconnecting to the BLUE&ME system. If no category istagged, the BLUE&ME system will index the song bythe song title.Playback options - while playing tracks you can selectthe following options: Play, Stop, Next track, Previoustrack, Shuffle and Repeat.10 BLUE&ME Users ManualNOTE:Themediaplayerdoesnotsupportaudiofilescom-pressedwithotherformatsandDRM(Digital RightManagement) protectedaudio files. Non-supportedaudio files that may be present on the USB device willbe ignored.To use the media player, you have to simply connect(directlyorbyanextensionlead)yourUSBstickoriPodtothecarUSBport. WhentheignitionkeyisturnedtoON, BLUE&MEwillstartbuildingyourmedia library. At the end of this operation you can surfthewholelibraryandscroll itscategoriesasdesiredusing the buttons on the steering wheel or voicecommands. BLUE&MEwill then play your selectionvia the car sound system.Road SafetyWARNING! Operatingcertainpartsofthissystemwhiledriv-ing can distract your attention away from the road,andpossiblycauseanaccident or other seriousconsequences; for this reason certain functions aredisabled by the BLUE&ME system until drivingconditionsaresecureand, ifrequired, onlywhenthe car is stopped. ReadandFollowInstructions: beforeusingyoursystem, read and follow all instructions and safetyinformation provided in this end user manual(Users Manual). Failingtofollowprecautionsfound in this Users Manual can lead to an accidentor other serious consequences.(Continued)BLUE&ME Users Manual 11WARNING! (Continued) KeepUsersManualinthecar: whenkeptinthecar, the Users Manual will be a ready reference foryouandotherusersunfamiliarwiththesystem.Pleasemakecertainthatbeforeusingthesystemfor thefirst time, all personshaveaccesstotheUsers Manual and read its instructions and safetyinformation carefully. Donotchangesystemsettingsorenterdatanon-verbally (using your hands) while driving. Stop thecarinasafeandlegalmannerbeforeattemptingthese operations. This is important, since whilesettinguporchangingsomefunctionsyoumightberequiredtodistract yourattentionawayfromthe road and remove your hands from the wheel.General Operation(Continued)WARNING! (Continued) VoiceCommandControl: somefunctions withinthe system may be accomplished using only voicecommands. Usingvoicecommandswhiledrivingallows you to operate the system without removingyour hands from the wheel. Prolonged Views of Screen: do not access anyfunction requiring a prolonged view of the screenwhile you are driving. Pull over in a safe and legalmannerbeforeattemptingtoaccessafunctionofthe systemrequiring prolonged attention. Evenoccasional short scans to the screen may be hazard-ous if your attention has been diverted away fromyour driving task at a critical time.(Continued)12 BLUE&ME Users ManualWARNING! (Continued) Volume Setting: donot raise the volume exces-sively. Keepthevolumeatalevelwhereyoucanstill hear outside traffic andemergency signalswhile driving. Driving while unable to hear thesesounds could cause an accident. UseofSpeechRecognitionFunctions: speechrec-ognition software is inherently a statistical processwhich is subject to errors. It is your responsibilitytomonitor anyspeechrecognitionfunctions in-cluded in the system and address any errors. Distraction Hazard: many features may requiremanual (non-verbal) setup. Attempting to performsuchset-upor entering data while driving canseriously distract your attention and could cause anaccident or other seriousconsequences. Stopthevehicle in a safe and legal manner before attempt-ing these operations.BLUE&ME Users Manual 13DISPLAY AND BUTTONS ON THE STEERINGWHEELDisplayNOTE: Inthis Users Guide, the descriptions of themenu entries refer to the multifunctional display, whichvisualizes some entries in abbreviated form.Front Steering Wheel Buttons1 MUTE/ESC 3 PHONE HANG UP2 PHONE/MENU 4 VOICE RECOGNITION (VR)14 BLUE&ME Users ManualRear Steering Wheel ButtonsTheright-handcontrol isarocker typeswitchwithapushbutton in the center. Press the switch up for Volume+. Press the switch down for Volume . The button in thecenteristheSRCbuttonusedtochangeaudiosources(e.g., AM, FM, CD, Media Player).The left-hand control is also a rocker type switch with apushbutton in the center. Press the top of the switch toScan Up . Press the bottom of the switch to Scan Down. The buttoninthe center is the PRESETUP/OKbutton.BLUE&ME Users Manual 15Button Short press function (less than1 second)Long press function (more than1 second)/MENU Launch BLUE&ME MainMenuDial thenumberdisplayedonthedisplaythat was accessedhaptically from the phonebookor the recent calls listAccept an incoming phone callSwitch between two ongoingphone conversations (call wait-ing)Dialthename/numberonthedisplay that was selected/entered by voice recognition16 BLUE&ME Users ManualButton Short press function (less than1 second)Long press function (more than1 second)/ESC Cancel voice recognitionCancel a voice announcementInterrupt message readingExit BLUE&ME Main MenuExit thesub-menuandreturnto the previous menu optionExit current menu option with-out storing settingsTurn the microphone on/offduring a phone conversationMute the ring tone of an incom-ing callMedia player Pause on/offBLUE&ME Users Manual 17Button Short press function (less than1 second)Long press function (more than1 second)VOICE RECOGNITION (VR) Activate voice recognitionInterrupt voiceannouncementtoprovide anewvoice com-mandRepeat the last utterance inavoice interactionPHONE HANG UP Reject an incoming call and enda phone call in progressEnd an active call and switch toa call waiting (on hold)18 BLUE&ME Users ManualButton Short press function (less than1 second)Long press function (more than1 second)PRESETUP/OK(left sidebackofsteering wheel)Confirm manually selectedmenu optionSwitch phone conversationfromthehands-freephonetoyour mobile phone and viceversaSelect displayed messageSCAN UP /SCAN DOWN(left side back of steering wheelScroll BLUE&ME menuitemsScroll though media playertracksScroll inbox messagesBLUE&ME Users Manual 19NOTE:For both operating modes of Voice Command steeringwheel buttons (short or long press), the functionchosen will be activated when you release the button.WhenconnectingtoBLUE&MEHands-FreeCom-munication for the first time, your phones phonebookwill automatically be downloaded. If this operation isnot allowedimmediatelyafter pairingfor the firsttime, the BLUE&ME system will prompt you for thephonebook each time you connect to the system. Forphones containing a SIM card, the phonebook on theSIM card will be downloaded if it is allowed. See yourphones Operating Manual for further details.20 BLUE&ME Users ManualBLUE&ME HANDS-FREE COMMUNICATIONPACKAGE QUICK REFERENCE GUIDETo quickly get started with using the BLUE&MEHands-Free Communication Package with voice recogni-tion and Bluetooth wireless technology:Prepare your mobile phone phonebookTurn the ignition key to ONTry out the voice commandsPair your mobile phoneMake a phone callInstructions for each of the above functions are given inthe following paragraphs.Prepare Your Mobile Phone PhonebookBefore creating a pairing relationship between your mo-bilephoneandBLUE&MEHands-FreeCommunica-tion, you should make sure that you have contact entriesinyourmobilephonephonebooksothat youcanusethem with the hands-free phone.If your phonebook is empty, quickly create several newentries for frequently dialed phone numbers. For furtherdetails, consult your mobile phone owners manual.To properly enter contacts in your mobile phone phone-book, refer to SETTING FUNCTIONS - PAIRING YOURMOBILE PHONE.BLUE&ME Users Manual 21Important NotesThephonebookcopiedtoBLUE&MEcanonlybeused when the corresponding mobile phone is pairedand connected.OnceamobilephoneispairedtotheBLUE&MEsystem, the phone will automatically connect/disconnect to the BLUE&ME system whenever theignition is turned to ON/OFF. All of the BLUE&MEfeaturesarefullyfunctional whenthephoneiscon-nected to BLUE&ME.NOTE: Some mobile phones may require you to accepttheBLUE&MEconnection, dependingonthemobilephone settings.EntriesstoredinSIMcardormobilephonememorycan be transferred to BLUE&MEwith differentprocedures, according to your mobile phone model.Try Out the Voice CommandsAt each stage of your dialogue with the system, you canalwaysusethevoicecommandHelp, togetdetailedindications about the voice commands available.To try out the Help function, proceed as follows:Press the steering wheel button.After BLUE&ME says Say a command and playsatoneindicatingthatvoicerecognitionisactive, sayHelp. BLUE&MEwill speak the list of voicecommands available.Afterthegeneralhelpmessageisfinished, saySet-tings and then Help. BLUE&ME will speak thelist of voice commands available for the Settings menu.Youcanthensayorpronounceoneoftheavailablecommands and proceed with the dialogue as you like.If youneedadditional help, pressthe steeringwheel button and say Help again.22 BLUE&ME Users ManualPair Your Mobile PhoneCAUTION!BLUE&MEHands-Free Communicationonlyal-lows this operation to be performed when the car isstopped.To pair your mobile phone, proceed as follows:Press the steeringwheel buttonandsaySet-tingsthen, attheendoftheBLUE&MEmessagesay Pairing.The system will show the phone pairing PIN numberonthemultifunctiondisplay. Forthenexttwosteps,consult your mobile phone owners manual aboutBluetooth pairing procedures for your phone.Onyourmobilephone, searchfordevicesequippedwithBluetoothwirelesstechnology(thesettingonyour mobile phone might be called Discover or NewDevice). In this list you will find BLUE&ME (nameidentifying the BLUE&MEsystemonyour car);select it.Whenpromptedbythemobilephone,enterthePINnumber shown on the instrument panel display usingyour mobile phone keypad. If pairing is successful, thesystemwill say Connecting andat the endthedisplaywillshowaconfirmationmessage, theIDofthe paired mobile phone.It is essential towait until yousee this confirmationmessage on the display. Pressing the /MENU buttonon the steering wheel or /ESC before the message isdisplayed may cancel the pairing process. If the pairingprocess fails, an error message will be displayed: in thisevent repeat the pairing procedure.BLUE&ME Users Manual 23Afterthefirst pairing, BLUE&MEwill sayWel-come immediately after connecting. This messagewillnolongerbeheardwhenyourphoneautomati-callyconnectstotheBLUE&MEsystemonfutureignition cycles.BLUE&ME will ask if you would like to copy yourpaired phone phonebook to BLUE&ME. It is recom-mended to copy it. To start copying the phonebook sayYes, otherwise say No.Making a Phone CallAssume that John Smith is one of the contacts stored inyour phonebook.To call John Smith, proceed as follows:Press the button and say Call John Smith.If the name is recognized, the system will display therecognized contacts information on the displayscreen.If there is just one phone number for John Smith in yourphonebook, the system will ask if you would like to callJohnSmith. Tostart thecall sayYes, otherwisesayNo.24 BLUE&ME Users ManualIf John Smith has several phone numbers, the system willaskwhichphonenumberyouwouldliketocall (e.g.,Call JohnSmith(at) Workor (at) Home?). Answerwith the type of required phone number (e.g., (at)Home).If John Smith has several phone numbers but the loca-tion(e.g.,thetypeofphonenumberlikework,home,etc.) is missing, the systemwill display the selectedcontact anda list of relatedphone numbers on theinstrumentclusterdisplay. Thehands-freecommunica-tion system will ask if you would like to call the phonenumber displayed. Torespondwithyes, sayYes,otherwise sayNo. Youcanalsoscroll throughthephone number list manually by pressing the buttons onthe back of the steering wheel until you find the requirednumber. Then, press the PRESET UP/OK button on therear of the steering wheel to start the call.To end the phone call, press thePHONEHANGUPbutton on the steering wheel.NOTE: If youencounter difficulties withanyof thevoice recognition operations, refer to HANDS-FREECOMMUNICATION PACKAGE - TROUBLESHOOT-ING.BLUE&ME Users Manual 25MESSAGE READER QUICK REFERENCE GUIDEIfyourBluetoothwirelesstechnologyenabledmobilephone supports the message reader function, at thearrival of a new SMS text, BLUE&ME plays a tone andit will ask if you would like to read it.Say Yes or press the /MENUbutton on thesteeringwheelorthePRESETUP/OKbuttonontherear of thesteeringwheel toreadthelast messagereceived.Say No or press the /ESC button on the steeringwheel; thesystemwillstorethemessagesoyoucanread it later.ForfurtherdetailsonthemessagereaderSMS,refertothe section MESSAGE READER FUNCTIONS.NOTE: If youencounter difficulties withanyof themessagereadersettings, refertoMESSAGEREADERTROUBLESHOOTING.26 BLUE&ME Users ManualMEDIA PLAYER QUICK REFERENCE GUIDETo start playing the digital audio files stored on your USBstick or iPod, proceed as follows:CopytrackstoyourUSBstick(BLUE&MErecog-nizes .wma, .mp3 .wav and aac formats for audio filesand .wpl and .m3u formats for playlists).USBstickswithout USBwire: just connect theUSBstick (directly or by an extension lead) to the USB portin the glove box of the car.USB sticks with USB wire: use the wire to connect theUSB stick to the USB port on the car.Turn the ignition key to ON. BLUE&ME will auto-maticallystart toplayyour digital tracks, selectingthemfromthelibrarythat wasbuilt whentheUSBstick was connected.After BLUE&MEhas built thelibrarycontainingyour digital audio files, you can select and play tracks,albums, artistsandplaylistsbyinteractingmanuallyor verballywithBLUE&ME. Buildingthelibrarymay require a few minutes if your USB stick containsseveral files.BLUE&ME Users Manual 27NOTE: Depending on the number of files, theBLUE&ME system may take up to 20 minutes to fullyindex the files whenthe device is first connectedtoBLUE&ME. The BLUE&ME system will rememberthe track data, so the next time the device is connected itwill perform a quick scan of the contents and be ready touse much faster.iPod player - refer to MEDIA PLAYER FUNCTIONS.The set up menu also allows you to decide whether toplayaudiofiles automaticallywhenconnectingtheUSB device, or to play them upon your command.For further details on the media player, refer to MEDIAPLAYER FUNCTIONS.NOTE: If youencounter difficulties withanyof thevoice recognition operations, consult the section MEDIAPLAYER - TROUBLESHOOTING.28 BLUE&ME Users ManualHOW TO USE BLUE&ME HANDS-FREECOMMUNICATIONSteering Wheel ControlsButtons on the steering wheel are used to performfunctions on the hands-free communication package,activating voice recognition, using the media playerfunctions, or selecting a BLUE&ME menu option.Certainbuttonshavemultiplefunctionswhichdependon the current state of the system.The function chosen in response to a key press is in somecases controlled by the duration of the key press (short orlong).NOTE:For further information refer to DISPLAY AND BUT-TONS ON THE STEERING WHEEL.Instructions concerning manual controls are identifiedin the text by the appropriate symbol.Voice CommandsVoice commands can be said by the driver, who does notneedtochangehis/hernormal drivingpositiontobeheardbythesystem, sincethemicrophoneisproperlylocated and oriented to this purpose.Voicecommands, whicharewords recognizedbythesystem, are identified as keywords.BLUE&ME Users Manual 29Thehands-freecommunicationsystemrecognizes andresponds to a preset list of voice commands. The list ofavailable voice commands depends on the keywordmenu level that you are currently on. The current list isalways available by pressing the steering wheelbutton and saying Help or, saying Help whenBLUE&ME is waiting for a voice command.BLUE&MEalsorecognizespersonalizedversionsofvoice commands, like the name of a contact inyourphonebook.There is no voice training required for using voicecommands with this system.To issue a voice commandto the system, press thesteeringwheel buttonandwait for the radiotomute, then listen for Say a command and then a toneindicatingthat voicerecognitionisactive. Then, speakthe command in your natural voice at a moderate pace.Whenthesystemrecognizesthecommand, it will ac-knowledgeyour commandbyspeakingaresponseoracting on your command.Voicecommands areorganizedaccordingtothreein-creasing levels: 1st level, 2nd level and 3rd level.When a valid* 1st level keyword is said, the system willactivate 2ndlevel keywords; whena valid2ndlevelkeyword is said, the systemwill activate 3rd levelkeywords.If the user says a valid1st level keyword, thenthesubmenurelevant tothat commandwill remainactiveuntil akeywordleadingtoanotherlevel isgiven, theinteraction is interrupted or the system times out becausenocommandhasbeengiven;thesameruleappliesforthe other lower levels (2nd and 3rd level).NOTE: For the list of available keywords, refer toVOICE COMMANDS (KEYWORDS) - SUMMARY.30 BLUE&ME Users Manual*ValidmeansthatthekeywordsaidisincludedintheBLUE&MEdictionaryandcanthereforeberecog-nized by the system for the concerned level.To repeat the last system voice announcement, press thesteering wheel button and say Repeat or hold thesteering wheel down for longer than 1 second.The systemcan issue voice announcements. Avoiceannouncement is a spoken message initiated by thesystem. To cancel a voice announcement, press the/ESCtocancel the entire VRsessionor press thesteeringwheel button, wait forthebeepandsayCancel.Avoice interaction is a two-way communication/spokenexchangebetweensystemanduser. Toinitiateavoiceinteraction, press the steering wheel buttonandissueacommand. Tointerrupt avoiceannouncementfrom BLUE&ME and say your reply before listening totheentirevoiceannouncement, pressthe steeringwheel button and speak your command after the prompt.To stop an ongoing interaction, press the /ESC button.You will hear a tone indicating when voice recognition isdeactivated.Thehands-freecommunicationHelpoptioncanspeakthe list of commands available to you at any time,dependingonthekeywordlevelthatyouarecurrentlyon. To use the Help system, say Help. Listen to the listofcurrentlyavailablecommandsanddecideonwhichcommand youd like to issue to the system.Adjust the volume of phone calls to a level that iscomfortable and safe while the car is in motion. To adjustthe default volume of BLUE&ME, refer to EXTERNALAUDIOVOLfunctionintheOwners Manual ontheDVD. Totemporarilyadjust thevolumeof thecurrentBLUE&ME Users Manual 31phone call, press + or or adjust the position of the radioknob. Afterthephonecallisdisconnected, thevolumewill revert back to the original level.You can press Vol + or Vol buttons on the rear of thesteeringwheelalsotoadjustthevolumeofthecurrentBLUE&ME voice announcement.Please remember that to interrupt a voice announcement,you can always press the steering wheel button atany time during a voice interaction and give a new voicecommand.NOTE:After you press the steering wheel button, if youdo not issue a voice command within a few seconds,the system will prompt you to say a voice command. Ifyou do not respond after two or three prompts to entera command, the voice recognition session will end. It isthe same case with not responding to a questionduring a voice interaction. You will hear a tone indi-cating when voice recognition is deactivated.Whenthesystemfailstorecognizeyourvoicecom-mand, it will give you another opportunity to say thevoicecommandagain. Ifyouareunsureofwhetherthe voice command is appropriate for the given con-text, say Help.32 BLUE&ME Users ManualUsing Voice RecognitionThe voice recognition systemmay occasionally mis-recognizeavoicecommand. Toensurethatyourvoicecommands are always recognized by the system, use thefollowing guidelines:After pressing the steering wheel button, say thevoicecommandafter thesystemsaysSayaCom-mand and plays a tone indicating that voice recogni-tion is active.Afterthesystemasksaquestion, beginsayingyourcommand.If you want to say a command without waiting for thesystem to finish its announcement or question, you canpress the steering wheel button again shortly tointerrupt what the systemis sayingandsayyourcommand.Speak at a normal volume.Say words clearly, in your natural voice at a moderatepace, without stops.Ifpossible, trytominimizebackgroundnoiseinthecar.Ask the other passengers to keep silent while you arespeaking voice commands to prevent misunderstand-ing since the system could recognize other words (inaddition to or different from your voice command) ifseveral people are speaking.If your car has a convertible top, close it before usingvoice recognition.BLUE&ME Users Manual 33NOTE:In countries where the BLUE&ME version in nativelanguage is not available, voice recognitionof thedifferent commands and phonebook contacts could bedifficult. Youarethereforerecommendedtoadoptapronunciation/accent meeting the language availableon BLUE&ME.The display language can be changed from the instru-ment cluster menu, but to change the voice recognition(VR) language and announcements, contact your FIATStudioorconsultthededicatedsiteatwww.fiatusa-.com website.DisplayThe different BLUE&ME Main Menu options are dis-played on the instrument panel multifunction display.The display shows the following information:StatusinformationfortheBluetoothwirelesstech-nology enabled mobile phone (e.g., on a call). Indicates that BLUE&ME is currently connectedwith a Bluetooth wireless technology enabled mobilephone.NOTE: This iconis onlydisplayedwhenthephoneinitiallyconnects to BLUE&MEandis part of themessage that indicates the mobile phones network pro-vider.NO BLUETOOTH - the connection betweenBLUE&MEandthemobilephoneisdisconnected(e.g., trying to make a call when no phone isconnected).Brief display of the name of your current mobile phonecarrier (- - - - - - - - displayed if not available).Information about message received, message senderphone number or name (if stored in the phonebook).34 BLUE&ME Users ManualCurrent BLUE&MEinformationor current menuoption.AudioBLUE&ME Hands-Free Communication uses your in-car audio equipment to deliver audio output (hands-freephone conversation, media player, voice announcementsandtonesignals). For thispurpose, thecurrent audioprogram is muted for the time needed.You can always adjust the audio volume either throughthe radio or the steering wheel controls.WhentheaudiosystemisusedbyBLUE&ME, theradio display will show dedicated messages.BLUE&ME Hands-Free CommunicationFunction MenuBLUE&MEMain Menu displays options within astructuredlist. Eachoption(item) inthemenucanbeviewedontheinstrument panel multifunctiondisplay.Available options enable activation of different functionsor change the settings of your BLUE&ME system.The Main Menu includes the following options:RECENT CALLS - this submenu allows you to view alist of therecent callsmadeorreceived. Thislist iseither downloaded from your mobile phone memory,oraccumulatedviauseof thehands-freephone, orboth.BLUE&ME Users Manual 35PHONEBOOK - this submenu allows you to view thephone numbers in your phonebook and to select one todial. If therearealargenumber of entriesinyourphonebook, then the items will be contained in groupswithin alphabetical submenus indicating the contactswithinthat group. Thenumberof contactswithinagroup depends on the amount of entries in yourphonebook.MESSAGE READER- This submenu enables theabilitytoreadthelast messagereceived, callingthemessage sender or deleting the last message received.It is possible to store up to 20 received messages in thededicatedinboxandtoplaythemlater, tocall themessage sender or to delete the messages. It is possibletoselectnotificationsignalsforthearrival ofanewSMS text. Messages must be received while the mobilephone is connected to the BLUE&ME system. Mes-sagesthat arealreadypresent onthemobilephonebefore entering the car and turning the ignition ON arenot accessibleMEDIA PLAYER - this submenu allows the ability toscroll the digital audio tracks in the library by folder,artist, genre, albumorbyplaylist. Thissubmenuisused to select and play tracks. For iPod players - referto MEDIA PLAYER FUNCTIONS.SETTINGS- this submenuallows youtoperformtasks such as managing your phonebook entries, createapairingrelationship, orselect theSMSnotificationsettings.36 BLUE&ME Users ManualPAIRING-thisallowthecustomertopairamobilephone. See pairing a mobile phone section fordetails.Launching the Main MenuTo launch the BLUE&MEMain Menu, press the/MENUbuttononthesteeringwheel; youcantheninteract with the system using the steering wheel buttons.Navigating the menu optionsTo navigate through the items in a menu, press the scanupor scandownbuttons ontherear of thesteeringwheel.When the number of characters in a display message istoo long for the allowable number of display characters,thetext inthedisplaymessagewill becut tofit thedisplay size.Toselect the optionshownonthe display, press thePRESET UP/OK button on the rear of the steering wheel.Toquittheselectedoptionortoexitasubmenu, press/ESC.BLUE&ME Users Manual 37BLUE&ME HANDS-FREE COMMUNICATIONFUNCTIONSBLUE&ME Hands-Free Communication lets you makeandreceive phone calls onyour Bluetoothwirelesstechnology enabled mobile phone using voice commands(keywords) or the steering wheel buttons.Byusingthevoicecommands, youcanmakecallstopeopleinyour phonebookbypronouncingtheir firstand/or last name, or you can make phone calls tonumbers not stored in your phonebook by pronouncingthe digits of the phone number or calling the last messagesender.Byusingsteeringwheel buttons, youcanmakephonecalls to people in your phonebook or call history list byselecting the associated item in the RECENT CALLS orPHONEBOOK submenus.Inaddition, youcanuseothercallingfeatures, suchasresponding to incoming calls, re-dial, callback, call wait-ing, reading a message or deleting it.NOTE:If youencounter difficulties withanyof the voicerecognitionoperations, refertoHANDS-FREECOM-MUNICATION PACKAGE - TROUBLESHOOTING.Before you can make and receive phone calls using thehands-free communication package, you must create apairing relationship for your mobile phone.For further information refer to SETTINGFUNC-TIONS PAIRING A MOBILE PHONE.To activate the hands-free communication package, theignition key must be turned to the ON position.If duringaphonecall youturntheignitionkeytoSTOP, you can continue your conversation through thehands-free communication package for another38 BLUE&ME Users Manual15 minutes. After 15 minutes BLUE&ME will sounda warning tone and will transfer the call to the mobilephone.Making a Phone CallYoucanmakeaphonecall usingoneofthefollowingmethods:Calling a contact in your phonebookDialing a phone number using voice commandsDialing a phone number using the mobile phonekeypadCalling a phone number using call history (recentcalls)Calling the sender of a received SMS messageNOTE: ForfurtherinformationrefertoFUNCTIONSOFSMSMESSAGESREADER, paragraphSMSMES-SAGES MANAGEMENTNOTE: When connected to BLUE&ME and dialing aphone number byvoice commands, it is essential tominimizebackgroundnoiseinthecar andtoasktheotherpassengerstokeepsilentwhileyouarespeakingthe digits. Since the system is speaker independent, it canalsorecognize other voices; there is ariskthat somenumberswillbeaccidentallyrecognized, addedtocor-rect numbers or not recognized.Calling a contact in your phonebookIt is a requirement that you create a pairing relationshipanddownloadyour mobile phone phonebooktothehands-free communicationsystemto use this dialingfeature.To call a contact in your phonebook using manualinteraction, proceed as follows:Press the /MENUbuttononthesteeringwheel toopen the Main Menu.BLUE&ME Users Manual 39UsetheScanUp andScanDown buttonsontherearofthesteeringwheeltoselectPHONEBOOKandthenpress PRESETUP/OKbuttonontherear of thesteering wheel.To select the alphabetical grouping which your contactsname belongs to, press the PRESET UP/OK on the rear ofthe steering wheel, then select the required contact.If the contact has just one phone number, press thePRESET/OKbuttonorthe /MENUonthesteeringwheel to start the call.If the contact has multiple phone numbers, use the scanupandscandownbuttonsontherearof thesteeringwheel toviewthedifferent phonenumbers andthenselect the required one by pressing the PRESET UP/OKbutton or the /MENU button on the steering wheel tostart the call.Toendthephonecall, press thePHONEHANGUPbutton on the steering wheel.Or, using voice interaction:Assume you would like to call the contact John Smith inyour mobile phone phonebook.PressandsayCall JohnSmith or Call JohnSmith(on/at) Mobile (in the previous statement, the keywordMobile represents the type of phone number youwould like to call. The phone number type can either be(at) Home,(at) Work, or(on/at) Other).If thenameisrecognized, thesystemwill displaytherecognizedcontacts information (John Smith, in thisexample) on the display screen.If John Smith has just one phone number, the system willask if you would like to call John Smith. To start the callsayYes, otherwise sayNo.40 BLUE&ME Users ManualIf John Smith has several phone numbers, the system willaskwhichphonenumberyouwouldliketocall (e.g.,Call John Smith(at) Work or (at) Home?). Answer withthe type of required phone number (e.g.,(at) Home).If John Smith has several phone numbers but theloca-tion(i.e.: thetypeofphonenumberlikework, home,etc.) is missing, the systemwill display the selectedcontact and a list of related phone numbers.To call the displayed phone number, sayCall.If the contact is correct but the phone number is wrong,you can scroll through the phone number list manuallybypressingScanUp andScanDown buttonsonthe rear of the steering wheel. When you find therequirednumber, press the /MENUbuttononthesteering wheel to start the call.Toendthephonecall, press thePHONEHANGUPbutton on the steering wheel.Practical hintWhen you call a contact with multiple phone numbers,use the at location portion of the voice command (e.g.,(at) Home,(at) Work,(on/at) Mobile). This willshorten the number of steps required to make the phonecall.Dialing a phone number using voice commandsTo dial a phone number using voice interaction, proceedas follows:Press the steering wheel button and say Dial.The system will respond with Number, please.Say the phone number as a sequence of single digits (e.g.,0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + (plus),# (pound) or * (star).For example, 248 555 1212 has to be said as: two, four,eight, five, five, five, one, two, one, two.BLUE&ME Users Manual 41The system will repeat the complete phone number anddisplay it.If the number is complete, say Dial or press the/MENU button on the steering wheel to start the call.If youhavenot finishedspeakingthephonenumber,thensaytheremainingdigitsandthensayDialorpress the /MENU button on the steering wheel to startthe call.Thesystemwill start thecall tothedisplayedphonenumber.Toendthephonecall, press thePHONEHANGUPbutton on the steering wheel.Youcansaythesequenceof phonenumber digits indigit groups which allows you to verify the recognizednumberinseveralsmallportions.Digitgroupsarecre-ated by the pauses you use while pronouncing thesequenceofdigits.Ifyoupauseafterpronouncingsev-eral digits, a digit groupis created. The systemwillrepeat the recognized digits.If thespokendigitsarecorrect, youcancontinuepro-nouncingthephonenumber. If thespokendigits areincorrect, you can delete the digit group by sayingDelete. The system will delete the last group of num-bers anddisplay the partially dialedphone number.Then, youcansaythedigit groupagainandalsotheremaining phone number digits.To cancel the phone call, say Cancel.Tocancel the phone call andstart dialingagain, sayStart over.To ask the system to repeat the recognized phone num-ber, sayRepeat. Ifnophonenumberwasdialed, thesystem says No number available.42 BLUE&ME Users ManualIftherepeatedphonenumberiscorrect, sayDialtostart the call.Dialing a phone number using the mobile phonekeypadAlternatively, you can dial a phone number using yourmobile phone keypad and then continue your conversa-tion using the hands-free communication system.It is a requirement that you create a pairing relationshipand that the mobile phone is within range of the hands-free communication system of your car.Todialaphonenumberusingyourmobilephonekey-pad, proceed as follows:Dial the phone number on your mobile phone keypadandconnect thephonecall followingtheprocedurerequired by your mobile phone.Conducttheconversationusingthehands-freecom-munication system.To end the phone call, press thePHONEHANGUPbutton on the steering wheel, or end the phone callfrom your mobile phone keypad.Calling a phone number using call history (recentcalls)RECENT CALLS option is a list of the recent calls madeor received. It can consist of up to ten incoming calls, upto ten outgoing calls and up to five missed calls.Todialaphonenumberusingmanualinteraction,pro-ceed as follows:Press the /MENU button on the steering wheel toopen the Main Menu.SelectRECENTCALLSandthenpressthePRESETUP/OK button on the rear of the steering wheel.BLUE&ME Users Manual 43The system will present a list of phone numbers. Usethe Scan up/Scan down buttons to select the requiredphone number. Then press the PRESET UP/OK buttonontherearof thesteeringwheel orthe /MENUbutton on the steering wheel to start the call.To end the phone call, press thePHONEHANGUPbutton on the steering wheel.Or, using voice interaction:To call back the last incoming phone number, press thesteering wheel button and sayCall back.The system will display information about the last callerandaskifyouwouldliketocall backthiscontact. Torespond withyes, sayYes, otherwise sayNo.To redial the last phone number you called, say Redial.The system will display information about the last con-tactyoucalledandwillaskifyouwouldliketoredialthis phone number. Toredial the last phone numbercalled, sayYes, otherwise sayNo.NOTE: If there are noincomingcalls storedontheRECENTCALLSlist, BLUE&MEwill say No re-ceived calls and the display will readNo call found.Incoming CallsWith the hands-free communication systemyou canrespond to incoming phone calls using the steering wheelbuttons. When a phone call is received, the system willdisplayinformationaboutthecallersidentity, ifavail-able.The incoming phone call can have a customized ring tone(if this function is available on your mobile phone).44 BLUE&ME Users ManualAnswering a phone callTo answer the phone call, press the /MENU buttonon the steering wheel.To end the phone call, press thePHONEHANGUPbutton on the steering wheel.Rejecting a phone callTo reject the phone call, press the PHONE HANG UPbutton on the steering wheel.Ignoring a phone callTo ignore the phone call and mute the phone call ringtone, press the /ESCbutton. Press the /ESCagain to hear the call or ring tone again.Answering an incoming phone call during anactive phone conversationTo answer an incoming phone call while another phoneconversation is active, press the /MENU button on thesteering wheel. The system will switch to the incomingphonecall andput thecurrent phoneconversationonhold.NOTE:Notall mobilephonesandcarrierssupportthisfea-ture. Contact the FIAT Studio or consult the www.fia-tusa.com website for compatible mobile phonesCertain mobile phones support the ability to transmityour contacts ring tones to the hands-free communi-cation systemandplay customizedring tones forincoming phone calls. In this case, the incoming phonecalls will haveyour mobilephonecustomizedringtones. The ring tone format must be compatible withthe type of audio files that BLUE&ME supports.BLUE&ME Users Manual 45Managing Phone CallsTransferring a phone conversation from yourmobile phone to the hands-free communicationsystemIfyouenterthecarduringaphoneconversationfromyourmobilephoneandyouwanttocontinuethecon-versationusingthecarhands-freecommunicationsys-tem, you can transfer the phone conversation to it.Proceed as follows:GetintothecarandturntheignitionkeytoON, toactivate the hands-free communication system.If thepermissionsonthephoneareset toallowanautomaticconnectiontheconversationwill betrans-ferred automatically. Otherwise the system will send amessage to your mobile phone offeringhands-freephone support.To transfer the conversation to the hands-free phone,enter the information required by your mobile phone.(This process is different for each mobile phone).The phone conversation is then transferredto thesystem.Transferring a phone conversation from thehands-free phone to your mobile phoneTotransfer aphoneconversationfromthehands-freecommunication system to your mobile phone, press thePRESET UP/OK button on the rear of the steering wheel.You can talk on your mobile phone and still use buttonsonthe steeringwheel. Specifically, youcanpress the/MENUbuttononthesteeringwheel toswitchbe-tweentwophonecallsonyourmobilephone, orpressthe PHONE HANG UP button on the steering wheelto end the active call and activate the call on hold.46 BLUE&ME Users ManualMuting a phone callTo mute a phone call on and disable the microphone sothat you can talk without being listened to by the caller,press the /ESC.Conference Call FunctionNOTE: OnlywithBluetoothwirelesstechnologyen-abled mobile phones supporting this function.WiththeConferenceCallfunctionyoucancallanothercontact while you are engaged in a phone conversation.In this way you can speak with both contacts at the sametime.To start a conference call while you are still engaged in aphoneconversation,callthesecondrequiredcontactasdescribed in MAKING A PHONE CALL.WhentheConferenceCall optionisactive, thedisplaywill showCONFERENCE.To end both calls, press the PHONE HANG UP but-ton on the steering wheel. Both calls will be ended at thesame time.BLUE&ME Users Manual 47MESSAGE READER FUNCTIONSIf your mobile phone with Bluetooth wireless technol-ogy supports the message reader function, at the arrivalof a new SMS text, BLUE&ME plays a tone and it willask if you would like to read it (according to set signaltypes).Even though your mobile phone is paired and connectedto the BLUE&ME Hands-Free Communication system,you might not be able to read SMS text messages on theBLUE&ME system. To view the list of mobile phonesand functions supported, go to the BLUE&ME www-.fiatusa.comwebsite or contact Customer Services at888-CIAO-FIAT (888-242-6342).NOTE: Forinformationonsignal types, refertoSMSNOTIFICATION SETTINGS.If youwant BLUE&MEto readthe SMS messagereceived by manual interaction, press the PRESETUP/OKbuttonontherear of thesteeringwheel. Themessage will be read and any abbreviation or emoticoncontained in the message will be spoken.Otherwise, press the /ESC; BLUE&MEwill notread the message but it will store it so you can read themessage later (for further information refer to, HOW TOREAD THE LAST SMS TEXT RECEIVED).Or, using voice interaction:If you say Yes,BLUE&ME will read the message andspeak any abbreviations and emoticons in the message.Otherwise say No; the system will store the message soyoucanreadit later (for further informationrefer toHOW TO READ THE LAST SMS TEXT RECEIVED).48 BLUE&ME Users ManualHow To Read The Last SMS Text ReceivedAfter receivinga message, BLUE&MEwill store it(bothreadornotreadmessages)intheinbox(refertoINBOX).To read the last message received, open the BLUE&MEMain menu and select the option MESS. READER, thenpress the PRESETUP/OKbuttononthe rear of thesteering wheel. Select the option READ LAST and pressthePRESETUP/OKbuttonontherearofthesteeringwheel; BLUE&ME will read the last message received.Or, using voice interaction:Press the steering wheel button and pronounceReadlastone;BLUE&MEwill readthetextofthelast message received.InboxBLUE&MEwillstoreupto20receivedmessages(inthe event of linkedmessages, the number of storedmessagescouldbelower) whenyourmobilephoneisconnectedwithBluetooth.Whentheinboxisfull,thenewincomingmessagewill deletetheoldest messagereceived (even if not yet read). It is also possible to deletejustonemessageortodeletetheentireinbox(refertoMANAGING MESSAGES).To read a particular message stored in the inbox, open theBLUE&MEMainmenuandselecttheoptionMESS.READER, then press the PRESET UP/OK button on therear of the steering wheel.Select the INBOX option, then press the PRESET UP/OKbuttonontherearof thesteeringwheel. Scroll storedmessages andselect the desiredone, the systemwillBLUE&ME Users Manual 49display the SMS text senders identification data, if avail-able. Select READ and press the PRESET UP/OK buttonon the rear of the steering wheel; BLUE&ME will readthe selected message.Or, using voice interaction:Press the steering wheel button and say Messagereader, after the audible tone, say Inbox;BLUE&ME will display the text senders identificationdata for the first message contained in the inbox (and alsothe phone number of the SMS text sender, if stored in thephonebook).To scroll the Inbox, say Previous or Next; when therequired message is displayed, say Read,BLUE&MEwill read the selected message.Say Delete to delete the selected message.Managing MessagesFor every message received, while BLUE&ME is con-nected to your phone, BLUE&ME can:read the messagecall the sender directlydelete the messageToaccesstheseoptionswhenreadingamessage, opentheBLUE&MEMainmenuandthenpressthePRE-SET UP/OK button on the rear of the steering wheel toselect the desired option.Or, using voice interaction:Press the steering wheel button and say Read orCall or Delete; the system will perform the desiredoption.50 BLUE&ME Users ManualDeleting All MessagesBLUE&MEcanstoreamaximumof 20messages; anewincomingmessage will delete the oldest one re-ceived from the inbox. All messages stored byBLUE&ME can be deleted by a single command.To delete all messages, openthe BLUE&MEMainmenu and select DELETE ALL, then press the PRESETUP/OKbuttonontherear of thesteeringwheel. Thesystem will ask DEL. MESS.? Press the PRESET UP/OKbuttonontherear of thesteeringwheel todeleteallmessages, or press the /ESC button to cancel.Or, using voice interaction:Press the steering wheel button and say Messagereader.After the audible tone say Delete all;BLUE&ME willaskDeleteallmessagesfromthevehiclenow?sayYes to delete all messages, otherwise say No.SMS Notification SettingsWith the BLUE&MEmessage reader it is possible to setthree notification signals to announce the arrival of a newSMS text:VIS.+ACOUST.:BLUE&MEwill notify you of anewincomingmessageusingavisual signal ontheinstrument panel display and through an audible tone.BLUE&ME willalsoaskifyouwouldliketoreadthe message.VIS. SIGNAL:BLUE&ME will notify you of a newincoming message using a visual signal on the instru-ment panel display. The message received can also bereadlater bypressingthe PRESETUP/OKbutton(refer to HOWTOREADTHE LAST SMS TEXTRECEIVED AND INBOX).BLUE&ME Users Manual 51READER OFF:BLUE&ME deactivates the Messagereader; a new incoming message will not be signalledand will not be transmitted to or stored on thesystem.OpentheBLUE&MEMainmenu, select theoptionMESS. READER, andthenpressthePRESETUP/OKbutton on the rear of the steering wheel. Select the optionSIGNALTYPEandscroll the three available optionsusingtheupanddownbuttons, or select thedesiredoption and then press the PRESET UP/OK button on therear of the steering wheel.Or, using voice interaction:Press the steering wheel button and say Messagereader. After the audible tone say Signal type;BLUE&ME will list the available options and then youcanselect therequiredonebysayingReaderofforVisual and acoustic signal or Visual signal only.52 BLUE&ME Users ManualMEDIA PLAYER FUNCTIONS The MEDIA PLAYER menu enables the following:to display tracks stored on your USB device/iPodto play audio files stored on your USB device/iPod.NOTE: Before using the player, refer to COMPATIBLEUSB STORAGE DEVICES to check that your USBmemory device is compatible with BLUE&ME.How To Connect The USB Device/iPod ToBLUE&ME Hands-Free CommunicationTo connect your USB device/iPod to BLUE&MEHands-Free Communication, proceed as follows:Copy tracks on your USB device/iPod ( BLUE&MErecognizes .wma, .mp3 and.wav, .aac formats foraudio files and .wpl and .m3u for playlists).USB devices without USB wire: just connect the USBdevice/iPod(directlyorbyanextensionlead)totheUSB port on the car.1 USB Port 2 Auxiliary JackBLUE&ME Users Manual 53USB devices with USB wire: use the wire to connect theUSB device/iPod to the USB port on the car.The multimedia player does not play audio files coveredby digital rights (DRM).Turn the ignition key to ON. If the AUTOPLAY featureissettoON, BLUE&MEwill startplaybackauto-maticallywhenaUSBdeviceispresent intheUSBport.IfAUTOPLAYissettoON, BLUE&MEwill startplayback automatically when a USB device is insertedinto the USB portNOTE:For the best use of BLUE&ME it is recommended touse USB devices with maximum capacity of 32 GBIndexingtimewill increasewiththenumberoffilespresent onthemediadevice. For agoodcustomerexperience, a maximum total file size of 4 GB on themedia device is recommended.For further informationrefer toSETTINGSFUNC-TION - MEDIA PLAYER.ItispossibletouseBLUE&MEtoselectandplaytracks after the media library has been built.54 BLUE&ME Users ManualHow To Manage The Media LibraryUsingthemediaplayeryoucanselect theaudiofilesstored on your USB device/iPod, using voice commandsor the steering wheel buttons.NOTE: Forthebest useof BLUE&MEit isrecom-mended to use USB devices with maximum capacity of32 GB.You can scroll audio files by folder, artist, genre, album orplaylistandthenselectthedesirecategoryusingvoicecommands. After selecting the desired category, select thedesired file using the manual controls.To surf your media library use the track data (e.g., title,artist, album, genre). USBstickscanalsobesurfedinfolders mode.NOTE:Notall formatscansupportmediainformation. The.mp3 and .wma, .aac recognized formats byBLUE&ME can support media information whereasthe .wav format files do not. BLUE&ME will popu-late the title field in the index with the filename as thetrack name for the folder option.For further details, refer to PRACTICAL HINTS FORUSING THE MEDIA PLAYER.Selection by folderTrack folders on your USB device/iPod are displayed inthe FOLDERS menu (not available for most iPods).BLUE&ME Users Manual 55Toselecttracksthroughmanualinteraction, proceedasfollows:Pressthe /MENUbuttontolaunchtheMainMenuandselect MEDIAPLAYER, thenpress the PRESETUP/OK button on the rear of the steering wheel.Select FOLDERS, then press the PRESET UP/OK button.UsetheScanUp/ScanDownbuttonstoscrollthroughthefolders. Toplayallsongtracksinallfolders, selectPLAY ALL and then press the PRESET UP/OKbutton. Todisplay folder tracks, select the desired folder and pressthe PRESET UP/OK button.Scroll the selected folder tracks. To play a desired track,select the title and then press the PRESET UP/OK buttonon the rear of the steering wheel.Or, by using voice interaction:Press the steering wheel button and say Folders.UsetheScanUp/ScanDownbuttonstoscrollthroughthefolders. Toplayallsongtracksinallfolders, selectPLAY ALL and then press the PRESET UP/OKbutton. Todisplay folder tracks, press the PRESET UP/OK button.Scroll the selected folder tracks. To play a desired track,select the title and then press the PRESET UP/OK buttonon the rear of the steering wheel.NOTE: For further details on FOLDERS, or menucustomization, refer to PRACTICAL HINTS FOR USINGTHE MEDIA PLAYER.56 BLUE&ME Users ManualSelection by artistTo select a specific artists song tracks, proceed as follows:Pressthe /MENUbuttontolaunchtheMainMenuandselect MEDIAPLAYER, thenpress the PRESETUP/OK button on the rear of the steering wheel.Select ARTISTSandthenpress the PRESETUP/OKbutton.UsetheScanUp/ScanDownbuttonstoscrollthroughthe Artists. To play music from a desired artist, select theartist and press the PRESET UP/OK button.Or, by using voice interaction:Press the steering wheel button and say Artists.Use the Scan Up/Scan Down buttons to scroll the artistsalbums. To play all the albums of a desired artist, selectPLAY ALL and press the PRESET UP/OK button.To play an album by the selected artist, select the desiredalbum and then press the PRESET UP/OK button.To play a track by the selected artist, select the title andthen press the PRESET UP/OK button.Use the Scan Up/Scan Down buttons to scroll the artistsalbums. To play all the albums of the desired artist, selectPLAY ALL and then press the PRESET UP/OKbutton. Toplayanalbumbyaselectedartist, select thedesiredalbum and then press the PRESET UP/OK button.To play a track by a selected artist, select the title and thenpress the PRESET UP/OK button.NOTE: If your USB device/iPod contains many audiofiles, the ARTISTS menu will be subdivided into alpha-betical submenus. The alphabetical submenu will displayjust the first letter of the artists it contains (e.g., A-F), or itwill display the first two letters (e.g., Aa-Ar).BLUE&ME Users Manual 57Selection by genreToselectthetracksbygenreusingmanual interaction,proceed as follows:Pressthe /MENUbuttontolaunchtheMainMenuandselect MEDIAPLAYER, thenpress the PRESETUP/OK button on the rear of the steering wheel.Select GENRESandthenpress the PRESETUP/OKbutton.Or, by using voice interaction:Press the steering wheel button and say Genre.Use the Scan Up/Scan Down buttons to scroll the genres.Toplayall thetracks of theselectedgenre, press thePRESET UP/OK button.NOTE: If your USB device/iPod contains many audiofiles, the GENRES menu will be subdivided into alpha-betical submenus. The alphabetical submenu will displayjust the first letter of the name of genre it contains (e.g.,A-F), or it will display the first two letters (e.g., Aa- Ar).Selection by albumTo select an album using manual interaction, proceed asfollows:Pressthe /MENUbuttontolaunchtheMainMenuandselect MEDIAPLAYER, thenpress the PRESETUP/OK button on the rear of the steering wheel.Select ALBUMSandthenpress the PRESETUP/OKbutton.UsetheScanUp/ScanDownbuttonstoscrollthroughthe albums. To play music from a desired album, selectthe album and press the PRESET UP/OK button.58 BLUE&ME Users ManualUsetheScanUp/ScanDownbuttonstoscrollthroughthealbumtracks. Toplayall thetracksinthealbum,select PLAY ALL and press the PRESET UP/OK button.To play just one track, select the track title and press thePRESET UP/OK button.Or, by using voice interaction:Press the steering wheel button and say Albums.UsetheScanUp/ScanDownbuttonstoscrollthroughthe albums. To play music from a desired album, selectthe album and press the PRESET UP/OK button.UsetheScanUp/ScanDownbuttonstoscrollthroughthealbumtracks. Toplayall thetracksintheall thealbums, select PLAY ALL and press the PRESET UP/OKbutton.To play just one track, select the track title and press thePRESET UP/OK button.NOTE: If your USB device/iPod contains many audiofiles, the ALBUMS menu will be subdivided into alpha-betical submenus. The alphabetical submenu will displayjust the first letter of the albums it contains (e.g., A-F), orit will display the first two letters (e.g., Aa- Ar).Selection by playlistPlaylists storedinyour USBdevice/iPodcanbedis-played with the PLAYLISTS menu.To select a playlist using manual interaction, proceed asfollows:Pressthe /MENUbuttontolaunchtheMainMenuandselect MEDIAPLAYER, thenpress the PRESETUP/OK button on the rear of the steering wheel.Select PLAYLISTS and press the PRESET UP/OK button.BLUE&ME Users Manual 59Use the Scan Up/Scan Down buttons to scroll the play-lists. To play a displayed playlist, select the playlist andpress the PRESET UP/OK button.Or, by using voice interaction:Press the steering wheel button and say Playlists.NOTE: Forfurtherdetailsonhowtobuildplaylists,refer to PRACTICAL HINTS.Playing Audio TracksNOTE: For managingaudiofiles oniPodor iPhonedevices, refer to TECHNOLOGIES SUPPORTED BYBLUE&MEHands-Free Communication, MANAG-ING AUDIO FILES FROM IPOD DEVICES.Shuffle playback of the whole media libraryTheoptionPLAYANYTHINGcanbeusedtoquicklyplay the whole content of your media library at random.Tostart PLAYANYTHINGusingmanual interaction,proceed as follows:Pressthe /MENUbuttontolaunchtheMainMenuand select MEDIA PLAYER, then select USB OPTIONSand press the PRESET UP/OK button on the rear of thesteering wheel.Select PLAY ANYTHING and press the PRESET UP/OKbutton.Or, using voice interaction:Press the steeringwheel buttonandsayMediaPlayer, thenafterthebeep, sayAdvancedUSBop-tions and finally, after the beep, say Play Anything.For further details on digital audio files playback, refer toDIGITAL AUDIO SELECTION.60 BLUE&ME Users ManualAudio playTo start playing an audio file using manual interaction,proceed as follows:If the AUTOPLAY option is on, connect your USBdevice/iPodtoBLUE&ME;trackplaybackwill startautomatically.You can also select the required audio file and then pressthePRESETUP/OKbuttonontherearofthesteeringwheel.Or, using voice interaction:Press the steering wheel button and say Playanything.PauseTo pause the track being played: Press the /ESC or theMUTE button on the radio.PlayTo resume playback of the paused track: Press the/ESC button, or the MUTE button on the radio.StopTostopplayingatrack: pressthe steeringwheelbuttonandsayStop. Toresumeplayback: pressthesteering wheel button and say Play.Next trackTo play the next track using manual interaction, proceedas follows:While playing a digital track press the Scan Up rearsteering wheel button.Or, using voice interaction:While playinga digital track, press the steeringwheel button and say Next.BLUE&ME Users Manual 61Previous TrackToplaythe previous trackusingmanual interaction,proceed as follows:While playing a digital track press the Scan Downrear steering wheel button.Or, using voice interaction:While playinga digital track, press the steeringwheel button and say Previous.NOTE: If the Previous track (manual or voice) com-mandisgivenafterplayingthefirst 3secondsof thetrack, the track will be started over. If it is given withinthe first 3 seconds, the previous track will be played.Changing audio sourcesTochange the current soundsource (Radio, CD, CDChanger, Media player), press the PRESET UP/OK but-tonontherear of thesteeringwheel or FM, AMorMEDIA buttons on the radio.NOTE: For further details onvoicecommands (key-words) to be used with the media player, refer to VOICECOMMANDS (KEYWORDS) - SUMMARY.iPod compatibilityWhat I can doListen to tracks in digital qualitySelecttracksbycategory(Artist, Album, Genre, etc.)by voice control or using the controls on the steeringwheelRecharge the iPod via USB62 BLUE&ME Users ManualNOTE:Thedevicemust beinplaybackmodeorpausedtostart playing a track on some iPod/iPhone models.LoadthetracksontotheiPod/iPhonedeviceusingthe procedure specified in the device manual.It is advisable to keep telephones and iPods updatedfor optimal operation with the BLUE&ME system.What I cannot doPlay audio tracks in m4p, and mp4 formatsPlayaudiotracks purchasedondigitallyprotectedtracks (DRM) (only on certain iPod devices and USBsticks)Practical Hints For Using The Media PlayerScrollingTo optimize scrolling of the FOLDERS menu, organizefolders on your USBstick before connecting it toBLUE&ME. To facilitate and to optimize FOLDERSmenuselection, organizeyourtracksinfolderswithnames that mean something to you.Organize media filesIn order to make the musical selection onBLUE&MEbasedonpredefinedselectioncriteria(author, album, type, etc.), informationcontainedinmultimediafilesmustbepresentanduptodate. Toupdate file data, follow the instructions given in yourmedia file management software instruction manual.BLUE&ME Users Manual 63IfcertainitemsinyourlibraryhavenoArtist, Album,Title and Genre, BLUE&ME will show UNKNOWNinALBUMSandGENRESmenus. Toenterthere-quireddata, followthe instructions givenonyoursoftware instruction manual.Building the media library on BLUE&MEHands-Free CommunicationBuilding the media library may require a few minutes. Ifthe time requiredis excessive, youcanintervene byreducing the number of audio files stored on your USBdevice/iPod.While buildingthe library, it is possible toplayarandomtrackselection. BLUE&MEwill buildthelibrary while playing music.Building playlists for BLUE&ME Hands-FreeCommunicationFor building .m3u or .wpl playlist for BLUE&ME usingMicrosoft Windows Media Player, proceed as follows:Copy required tracks into a new folder or to your USBmemory device.Open Microsoft Windows Media Player. Select File,and then Open from the menu.Scroll the content of the USB device/iPod connected toyour computer and select the audio files to be entered inthe playlist (only available on certain iPod devices).Click on Open.Move to File and select Save Now Playing List As ....In field File Name enter the required name and in fieldSave as type set the type: .wpl or .m3u.Click on Save.When the above steps are complete, the new file .m3u or.wpl will be built.64 BLUE&ME Users ManualSETTING FUNCTIONSTheSETTINGSmenuenablesyoutoperformthefol-lowing functions:Pair a mobile phoneManage user dataChange the Media player settingsView the Advanced optionsNOTE: The settings submenuare only accessedbyusing the steering wheel buttons.To perform functions and adjustments in the SETTINGSmenu, you may use the buttons on the steering wheel orvoice commands while the vehicle is not moving. Whenthe vehicle is moving, you can use voice commands only.Instructions are provided for both methods.NOTE: If youencounter difficulties withanyof theBLUE&ME settings, refer to TROUBLESHOOTING.Pairing a Mobile PhoneBefore you can use your mobile phone with the hands-free communication function on your car, you mustcreateapairingrelationshipbetweenthemobilephoneand the hands-free communication system.During the pairing procedure, the hands-free communi-cationsystemattemptstodetectaBluetoothwirelesstechnology enabled mobile phone within range, and thenestablishes the connection using a Personal IdentificationNumber (PIN). After a pairing relationship is established,youcanusethehands-freecommunicationsystemtomakeandreceivephonecalls, anddootheroperationsvia your wirelessly-connected mobile phone.BLUE&ME Users Manual 65NOTE: Some mobile phones may require a settingchange or access permission change in order forBLUE&MEtoautomaticallyreconnect. Seeyourmo-bile phones manual for more information.IMPORTANT! The mobile phone pairing PIN number isaspecialPINgeneratedrandomlyateachnewpairingand used just for this operation. It is not your SIM PINandthereforeitisnotrequiredtostoreortokeepitinmind; losing it will not impair the hands-free communi-cation system operation.The pairing procedure will only need to be performed oncefor your mobile phone. After this procedure BLUE&MEwill automatically connect to your phone each time youget into the car and turn the ignition key to ON.You can create a pairing relationship using the PAIRINGoption in the SETTINGS menu.To create a pairing relationship using manual interaction,proceed as follows:Press the /MENU button to open the Main Menu, thenselect SETTINGS by pressing the PRESET UP/OK but-ton.Select PAIRINGandthenpress the PRESETUP/OKbutton. The system will start the pairing procedure.BLUE&MEwillshowthemobilephonepairingPINon the instrument panel display and announces it. Pleasenote that this is a PIN used just for this operation; it is notyour SIM PIN.For the next two steps, consult your mobile phoneowners manual about Bluetooth pairing.Onyourmobilephone, queryforBluetoothwirelesstechnology enabled mobile phones that are within range(this option on your mobile phone might be calledDiscover, New Device, etc.). View the list of BluetoothwirelesstechnologyenabledmobilephonesandselectBLUE&ME (item that identifies BLUE&ME on yourcar).66 BLUE&ME Users ManualWhenpromptedbythe mobile phone, enter the PINnumber shown on the instrument panel display. If pair-ing is successful, the system will say Connecting andthen the display will show the paired mobile phone ID.Itisofvital importancetowaituntil thisconfirmationmessage is displayed, since pressing the /MENUbuttonor the /ESCbuttonwill cancel the pairingprocess. If pairingfails, anerror messagewill bedis-played and the pairing procedure needs to be repeated.Afterpairing, thesystemwill sayWelcomeimmedi-atelyafterconnecting. Thismessagewill nolongerbeheard the next time the phone connects to the system.The system will ask if you would like to copy your pairedphones phonebook. It is recommended to copy it. To startcopying the phonebook, press the PRESET UP/OK button;otherwise press the /ESC button. You can downloadyourphonebookatalatertimeusingthemenuoptionSETTINGS, USER DATA, or PHONEBOOK.Or, using voice interaction:Pressthe buttonandsaySettings, wait forthetone then say Pairing.The system shows the mobile phone pairing PIN on theinstrument panel display and repeats it.For the next two steps, consult your mobile phoneowners manual about Bluetooth pairing.Onyourmobilephone, queryforBluetoothwirelesstechnology enabled mobile phones that are within range(this option on your mobile phone might be calledDiscover, New Device, etc.). View the list of Bluetoothwireless technology enabled mobile phones and select BLUE&ME (item that identifies the hands-free com-munication package in your car).BLUE&ME Users Manual 67Whenpromptedbythe mobile phone, enter the PINnumbershownontheinstrument panel displayusingyourmobilephonekeypad.Ifpairingissuccessful,thesystem will say Connecting and then the display willshow the paired mobile phone ID.Itisofvital importancetowaituntil thisconfirmationmessageisdisplayed, sincepressingthe /MENUor/ESCbuttons at this time maycancel the pairingprocess. If pairingfails, anerror messagewill bedis-played and the pairing procedure needs to be repeated.The first time a phone connect to the system, the systemwillsayWelcomeimmediatelyafterconnecting.Thismessage will no longer be heard the next time the phoneconnects to the system.The systemwill askif youwouldlike tocopyyourphonesphonebook.Copyingisrecommended.Tostartcopying the phonebook, say Yes; otherwise say No.For certain mobile phones the phonebook is not copiedautomatically, in this case you must send the contacts inyour mobile phones phonebooktothe BLUE&MEhands-free communication systemusing your mobilephone keypad.Practical hintsToimproveboththevoicerecognitionof yourphone-bookentriesandBLUE&MEpronunciationaccuracywhenrepeatingtheentries, pleasetrytoentercontactentries and memorize them using the following criteria:Avoid abbreviations.Writeforeignnamesaccordingtothewayinwhichtheyare pronouncedaccordingtothe rules of theBLUE&ME language set on your car. For example,enterTanjaasTanya, toimproverecognitionac-curacy and also to obtain the correct pronunciation bythe system.68 BLUE&ME Users ManualWhenaddingor editingcontact entries, insert theappropriate accent marks whenthe name requiresthesemarks tobeproperlypronouncedandrecog-nizedbythesystem. ForexampleenterNicoloRe-bora as Nicol Rbora to obtain the correctpronunciation.When adding or editing contact entries, bear in mindthat certaincapital letters may be readas Romannumerals (e.g., V may be read as fifth).Whencallingcontacts byvoice, donot includethemiddle names or middle initials of your contacts.NOTE:You only need to pair your mobile phone a single time.You can pair up to five mobile phones, but only onephone can be used at a time. To use one of the otherpaired phones, the currently connected phone needs tobe poweredoff or its Bluetoothsettingmust beturnedoff. BLUE&MEwillthensearchthepairedphone list looking for a phone to connect to.Onyour pairedmobilephone, theBluetoothsettingmust beturnedoninordertoconnect yourmobilephone with BLUE&ME Hands-FreeCommunication.BLUE&ME Users Manual 69Before transferring your mobile phone contacts to thehands-free communication system, make sure thateachcontactsfirst andlast nameisuniqueanddis-tinctlyrecognizabletoimprovethevoicerecognitionresults.Depending on the size of your phonebook,BLUE&MEmaytakesometimetodownloadorcheck for updates. So, if you try to immediately makea phone call after getting into the vehicle, theBLUE&ME system may tell you to wait.The system will download only valid contact entries. Avalid contact entry must include both a name and atleast one phone number.If you would like to re-pair your mobile phone, deletethe old pairing relationship first. During this operationall paired phones and their associated phonebookinformation will be deleted. To delete a paired phonefrom the system, from the USER DATA menu, selectDELETE USERS. On your mobile phone, deleteBLUE&MEfromthe list of Bluetooth mobilephones followingthe specific instructions for yourmobilephone(refer toyour mobilephoneownersmanual).If youdownloadaphonebookwithacontacts listincludingmorethan1000contacts, thesystemmayoperate slower than expected and voice recognition ofthe names in your phonebook may be degraded.Ifthepairinglistisaccidentallydeleted, thepairingprocedure will be repeated.Managing User DataYou can manage the user data used by BLUE&ME byentering the USER DATA menu. The phonebook can bedeleted, all pairedphonesandtheirassociatedphone-book data can be deleted, or all data can be deleted. If alldata is deleted then the memory in BLUE&ME will berestored to its initial empty condition. If the phonebook70 BLUE&ME Users Manualhad not been previously downloads during the phonesinitial pairing then you can choose to download it now oryoucancopyindividual contacts fromyouphonetoBLUE&ME. Not all phones support phonebook down-loadingorcopyingindividual contacts. Consultwww-.fiatusa.comforfurtherinformationonthelistofcom-patible mobile phones.ToopentheUSERDATAmenuusingmanual interac-tion, proceed as follows:Press the /MENU button to open the Main Menu, thenselect SETTINGS by pressing the PRESET UP/OK but-ton.Select the USERDATAandthenpress the PRESETUP/OK button.Or, using voice interaction:Press the button and say Settings. Wait until afterthe tone then say User data.In the USER DATA menu you can perform the followingfunctions described below.Delete user dataIn the USER DATA menu you can delete the pairing list.After youdelete the pairing list, youcannot use anunpaired phone with the hands-free communication sys-tem, or its phonebook, until you re-pair it. Alwaysremember that this operation deletes all the devices fromthe pairing list.To delete user data using manual interaction, proceed asfollows:Select DELETE USERS and then press the PRESETUP/OK button.The system will display the message DELETE USERS?.To confirm, press the PRESET UP/OK button.BLUE&ME Users Manual 71Or, using voice interaction:Press the , say Settings, wait for the tone then sayDelete users.The systemwill ask Delete all paired users?. Toconfirm, say Yes.NOTE:Always remember that if amobilephoneis pairedwith the system while another phone is connected, theconnection with the current phone is ended to estab-lish a connection with the new phone.It is not possible to delete the pairing relationship witha single phone on the pairing list unless it is the onlyphone present on the pairing list.If all paired users are deleted from the pairing list theneachphonemust bere-pairedbeforeit canbeusedwith BLUE&ME again.Delete the phonebookIn the USER DATA menu you can delete the phonebookdata that was downloaded to the system.To delete the phonebook using manual interaction, pro-ceed as follows:Select DEL. PHONEBOOK and then press the PRESETUP/OK button.The systemwill displaythe questionDEL. PHONE-BOOK?. To confirm, press the PRESET UP/OK buttonOr, using voice interaction:Pressthe buttonandsaySettingswait for thetone and then say Delete phonebook.ThesystemwillaskDeletecopyofphonebookfromthe system? To confirm, say Yes.72 BLUE&ME Users ManualDownload the phonebookIf you chose not to download the phonebook during thephonepairingprocedure,orifyourecentlydeletedthecurrent phonebook, the USERDATAoption will beavailable in the PHONEBOOK menu.Todownloadapairedmobilephonephonebookusingmanual interaction, proceed as follows:Select PHONEBOOK and then press the PRESETUP/OK button.Or, using voice interactionPressthe buttonandsaySettings, wait forthetone and then say Download phonebook.Add contactsTo copy contacts from your mobile phone to the hands-free communicationsystemusingmanual interaction,proceed as follows:Select ADDCONTACTSandthenpressthePRESETUP/OK button.Or, using voice interaction:Pressthe buttonandsaySettings, wait forthetone and say Add Contacts.Then follow the instructions given on your mobile phoneowners manual for transferring contacts.BLUE&ME Users Manual 73Reset user dataTo reset all user data to the default values using manualinteraction, proceed as follows:Select DELETE ALL and then press the PRESET UP/OKbutton.Thesystemwill displaythequestionDeleteall?. Toconfirm, press the PRESET UP/OK button.Or, using voice interaction:Pressthe buttonandsaySettings, wait forthetone and then say Reset All.The system will ask Delete all data saved by users fromthe system?. To confirm, say Yes.Advanced OptionsTo navigate to the ADV. OPTIONS menu using manualinteraction, proceed as follows:Press the /MENU button to open the Main Menu, thenselectSETTINGSbypressingthePRESETUP/OKbut-ton.Select ADV. OPTIONS and then press the PRESETUP/OK button.WithintheADV. OPTIONSmenuyoucanaccess thedevice ID.NOTE: This code is an 8-digit number (device ID) whichuniquely identifies the BLUE&ME system installed onyour car and cannot be changed.74 BLUE&ME Users ManualAccessing the Image IDTo access the Image ID by manual interaction, proceed asfollows:Select Image IDandthenpress the PRESETUP/OKbutton.The instrument panel display will show yourBLUE&ME Image ID code.Accessing the Application IDTo access the Application IDby manual interaction,proceed as follows:Select Application ID and then press the PRESET UP/OKbutton.The instrument panel display will show yourBLUE&ME Application ID code.Accessing the device IDTo access the device ID by manual interaction, proceed asfollows:Select device IDandthenpress the PRESETUP/OKbutton.The instrument panel display will show yourBLUE&ME device ID.Media Player SettingsAutoplayWhen the Autoplay option is on, BLUE&ME will startto play the audio files on your USB device as soon as youturn the ignition key ON. Once you activate this option,the first time youuse the player, playbackwill startautomatically.BLUE&ME Users Manual 75To change the Autoplay setting using manual interaction,proceed as follows:Open the Main Menu, select MEDIAPLAYER, SET-TINGS, AUTOPLAY and then press the PRESET UP/OKbutton.ToactivateAutoplay, selectAUTOPLAYONandpressthe PRESETUP/OKbutton. To deactivate Autoplay,selectAUTOPLAYOFFandpressthePRESETUP/OKbutton.Or, using voice interaction:Press the and say Autoplay on or Autoplay off.NOTE: Ifyouchangethe Autoplaysettingsaftercon-necting the USB device, the new setting will be activatedthe next time you connect a different USB device (or thesame USB device with an updated track library).ShuffleUse the Shuffle option to change the playback sequence.With the Shuffle option on, BLUE&MEwill playdigital audio files at random.TochangetheShufflesettingusingmanualinteraction,proceed as follows:Open the Main Menu, select MEDIAPLAYER, SET-TINGS, SHUFFLEandthenpressthePRESETUP/OKbutton.To activate the Shuffle option, select SHUFFLE ON andpress the PRESET UP/OK button. To deactivate it, selectSHUFFLE OFF and press the PRESET UP/OK button.Or, using voice interaction:Press the button and say Shuffle on or Shuffleoff.76 BLUE&ME Users ManualRepeatUse the Repeat option to repeat a track.To activate the Repeat option using manual interaction,proceed as follows:Open the Main Menu, select MEDIAPLAYER, SET-TINGS, REPEATandthenpress the PRESETUP/OKbutton.ToactivatetheRepeat option, select REPEATONandpress the PRESET UP/OK button. To deactivate it, selectREPEAT OFF and press the PRESET UP/OK button.Or, using voice interaction:Press the and say Repeat on or Repeat off.NOTE: WiththeRepeat optionon, thepreviousandnext commands will play the previous or next track andthe new track will be repeated.Exit the settings menuAt the end of any of the operations described above, youcan exit the SETTINGS menu as described below or themessage will disappear from the display in less than 10seconds.To exit the SETTINGS menu using manual interaction:Select EXIT and then press the PRESET UP/OK button.BLUE&ME Users Manual 77BLUE&ME HANDS-FREE COMMUNICATIONSUPPORTED MOBILE PHONESBLUE&ME Hands-Free Communication supportsyourpersonal devicesviaBluetoothwirelesstechnol-ogy and USB.To get updated information about devices supported byBLUE&ME, contact a FIAT Studio or consult thededicated website at www.fiatusa.com.Mobile Phones With Bluetooth WirelessTechnologyBLUE&ME Hands-Free Communication supportsmost mobile phones with Bluetooth 1.1 and Hands-Free1.5 profile support (refer to the Bluetooth wirelessconnectionspecifications giveninyour mobile phoneowners manual).Due to the different software versions supportedonmobilephones,certainfunctions(e.g.,answeringasec-ond incoming phone call, transferring phone a phone callfrom hands-free communication system to mobile phoneand vice versa, etc.) may not be supported as described inthismanual.Inanycase,phoneconversationusingthehands-free communication package will not be impaired.Pull phonesPullphonemeansthat yourmobilephonesupportsautomaticphonebookdownloadwithBluetoothwire-less technology, your whole phonebook will be automati-cally downloadedto BLUE&MEduring the initialphonepairingprocedureandupdatedeverytimeyourphone connects to BLUE&ME.To consult the list of mobile phones and functionssupported, consult the dedicatedwebsite at www.fia-tusa.com or Customer Services on 888-CIAO-FIAT (888-242-6342).78 BLUE&ME Users ManualPush phones (phonebook not automaticallydownloaded)Pushphonemeansthatyourmobilephonesupportssingle contact download with Bluetooth wireless tech-nology. After the pairing process you will need to go tothe USER DATA, ADD CONTACTS menu to send phone-book contacts from your mobile phone to BLUE&ME.Mobile phones with message reader (not allmobile phones support reading incoming SMSmessages)If your mobilephonecansendmessagesthroughtheBluetoothwireless technology, it is possible toreadincoming messages using the BLUE&ME Hands-FreeCommunication Package, to store them in the dedicatedinbox or to delete them.Supported USB Memory DevicesUSB Memory DevicesThemediaplayersupportsmostUSBmemorydevices.1.0, 1.1 or 2.0.NOTE: It is not possible to use USB devices equippedwith a password function.BLUE&ME Users Manual 79Supported digital audio filesThe media player supports audio files with the followingformats:Extension Audio Coding.wma Windows Media Audio Decode (FormatTag: WMA2 = 353, WMA1=352)Decodes all CBR profiles from 5kbps to192kbps, 8kHz to 48kHz, mono and ste-reoDecodes all v9 CBR profiles, from 5kbpsto320kbps, 8kHzto48kHz, monoandstereoDecodes all quality based, bit rate basedand peak constrained VBR profilesSupports WMAv1 andWMAv2 bitstreamsExtension Audio Coding.mp3 MP3 in two forms: MPEG-1 Layer 3(sampling rates 32 kHz, 44.1 kHz and 48kHz) and MPEG-2 Layer 3 (16 kHz,22.05 kHz and24 kHz). Supports theproprietary Fraunhofer extension calledMP2.5, whichaddsevenlowersam-plingrates(8kHz, 11.025kHzand12kHz). ISOcompliancewiththefollow-ingbitrates(kbps): 16, 32, 64, 96, 128,192. Both Mono and Stereo. And Layer 3,VBR and CBR support..wav Digital audio file, without data compres-sion.80 BLUE&ME Users ManualExtension Audio Coding.aac MPEG-4, M4A supportSampling rates: 8, 11, 16, 22, 24, 32, 44, 48kHzBitrates: 16, 32, 48, 64, 80, 96, 112, 128,160, 192, 224, 256 kbpsNOTE: The media player does not support audio filescompressed with other formats and DRM (Digital RightManagement)protectedaudiofiles. Non-supportedau-dio files that may be present on the USB device will beignored.Supported playlist formatsThe media player supports the following playlist formats:.m3u file containing a list of tracks (release 1 and 2)..wpl Windows-based file containing a playlist.(playlist capacity limit for this format is 300Kb). Play-lists with extension .wpl can be built with MicrosoftWindows Media Player.The media player does not support nestedor linkedplaylists. Playlist tracks with relative and absolute pathsare supported.Query-based playlists are not supported.If a file is not in the expected location a search for will notbe performed.For further details on how to build playlists forBLUE&ME, refer to PRACTICAL HINTS FOR USINGTHE MEDIA PLAYER.BLUE&ME Users Manual 8182 BLUE&ME Users ManualLIST OF AVAILABLE VOICE COMMANDST