802.11n wps setup guide - airlive · 802.11n wps setup guide 1 i. pbc: when pc connects to router,...
Post on 16-May-2018
230 Views
Preview:
TRANSCRIPT
802.11n WPS Setup Guide 0
802.11n WPS Setup Guide
802.11n WPS Setup Guide 1
I. PBC: When PC connects to Router, open with Router’s Management page in a browse, choose “WPS Settings” to start configuration. 1. enable the check box “Enable WPS”, then click “Start PBC”
2. Click on “Ok” to continue
OK
802.11n WPS Setup Guide 2
3. “Start PBC” button turn into gray (inactive) in Web UI, waiting for client side setting.
4. On the Client side PC, start “Wireless Utility” and click “PBC” button, to start auto pairing.
OK Help
802.11n WPS Setup Guide 3
5. While scanning is successful, the information of the other device appears in the windows below.
II. PIN
1. Note the data in the “Pin Code” and keep it for router side setting.
OK Help
OK Help
802.11n WPS Setup Guide 4
2. On the computer connecting to Router, start the management page in the browser again.
3. Key in the Pin Code into the field of “Start PIN” of “Device Configure”
802.11n WPS Setup Guide 5
4. Click on “Start PIN” button
5. On the client side computer, press the “PIN” button in the “Wireless Utility” to complete
Auto-pairing process.
OK Help
top related