5 / / 4 / / june 15, 2014 12.5' x 18 ... - dovetail jig plans
Post on 24-Oct-2021
4 Views
Preview:
TRANSCRIPT
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY
A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred Beal
12.5' x 18' Trapper Cabin
June 15, 2014
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 01A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealFloor Framing
204"
138"
6"
6" 24"
2x10 Joist
65"
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 02A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealFloor Plan
50-1
/2"
36"
75"
2-6 Door
3-0 x 3-0Window
3-0 x 3-0Window
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 03A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealLog Dimensions
138"7"
11" 204" 65"
6"
204"
138"
6"
Typical at ends
The logs in these plans are 6x12 and there is a 3/4 inch gap between each log when stacked. Other log heights and gaps may be used.
All logs are full length. Window and door openings to be cut after all logs are stacked
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 04A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealIsometric
114-3/4"
Approximate dimensionshown. Actual will vary.
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 05A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred Beal
82-1/8"
13-3/8"
12
6
Roof Framing
3x8 Ridge
2x6 Rafter
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 06A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealFront
Gables may be constructedof logs or may be conventionally framed.
Recess 3/4 blockingbehind chinking
to support log above.Fasten logs togetherwith large spikes or
log screws.
Gable log ends cut flush with top of rafters.
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 07A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealElevation 1
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 08A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealElevation 2
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 09A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred BealBack
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 10A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred Beal
96"
Section View
Finished Floor
Actual dimension may vary
12.5' x 18' Trapper Cabin
12345
REVISIONS
REMARKSMM/DD/YY 11A
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ _
..._ _ /_ _ /_ __ _ /_ _ /_ _ Copyright 2014 Fred Beal
Recess spacer blocks behind chinking
Optional Window Detail
1/2" Diameter Steel Pinsin 1/2" holes in spanner log/window frame
1/4" x 5" Lag Bolts
1/4" Wide Slots
typical both sides. These blocks provide support for the log ends.
This detail may be used where log settlement is expected (when logs are not dry).
Window trim to cover space above window frame. Do not nail trim to spanner log.
Slots may be countersunk 1/2" to countersink bolt heads.
This detail can be used to frame an opening to fit either a simple sash or to fit a commercial window unit.
Secure frame directly to log with 20D spikes
1" Chamfer
H x
1/2
"
H
2x6
top related