20,000 cfm filt-aire p.a.s.s. (portable air scubber system ...€¦ · 20,000 cfm filt-aire...

50 HP 480/3/60 TEFC PREMIUM EFFICIENCY MOTOR, 60 FLA.

MANUAL DISCHARGE DAMPER, WITH PROTECTIVE SCREEN

**OPTIONAL**DISCHARGE ELBOW

**OPTIONAL**84 dBA DISCHARGE SILENCER

**OPTIONAL**RETURN AIR DISCHARGE TRANSITION, WITH (2) 20" FLANGED DUCT CONNECTIONS

**OPTIONAL**CAM-LOC CONNECTORS

20,000 ACFM FAN @ 10" WG (CW ROTATION)

NEMA 4 CONTROL PANEL 50 HP 480/3/60 ACROSS THE LINE STARTER WITH CIRCUIT BREAKER DISCONNECT, SOLID STATE OVERLOAD, 110 VOLT CONTROL WIRING (RUN LIGHT, ON/OFF FAN SWITCH).

36" ISOLATION VALVE

**OPTIONAL**CARBON ABSORBER SECTION, (9) REQUIRED24" x 24" x 11-1/2" HEGA FILTER V-BANK DESIGN.

HEPA OR ULPA FILTER SECTION, (9) REQUIRED24" x 24" x 11-1/2" HEPA FILTER,99.97% @ 0.3 MICRON, FOAM GASKET. **OPTIONAL**: 24" x 24" x 11-1/2" ULPA FILTER, 99.9995% @ 0.12 MICRON, GEL SEAL.

PREFILTER SECTION, (9) REQUIRED24" x 24" x 4", MERV 7.

(2) 2" NPT DOP TEST PORTS.

(2) 3" FLANGED DECONTAMINATION PORTS, WITH BUTTERFLY VALVES & 3" QD PRESSURE CONNECTIONS.

(2) 20" ISOLATION VALVES, WITH FLANGED DUCT CONNECTION.

(3) MAGNEHELIC GAUGES, MEASURES DIFFERENTIAL PRESSURE ACROSS EACH FILTER SECTION.

INTERNAL AIR DIFFUSER.

FILTER ACCESS DOORS, WITH BAG-IN / BAG-OUT CONTAINMENT PROTECTION. 8 MIL PVC CHANGING BAG, ON DUAL RIBBED BAGGING RING.

6" x 12" x 1/4" FORK POCKETS

(4) LIFT EYES

20,000 CFM Filt-Aire P.A.S.S.(Portable Air Scubber System)ELECTRIC SKID

DESIGN & CONSTRUCTION DATA:* MODEL # : Filt-Aire 20-ASES* OUTDOOR MOBILE EQUIPMENT* WEIGHT OF UNIT 12,000 LBS. (EMPTY)* 15" WG (DESIGN PRESSURE)* 12 GA. CARBON STEEL CONSTRUCTION* PARTICULATE FILTER CAPABILITIES: 13,500 CFM @ 375 FACE VELOCITY (FPM) 18,000 CFM @ 500 FACE VELOCITY (FPM) 22,500 CFM @ 625 FACE VELOCITY (FPM)

OPERATING DATA:* 20,000 ACFM (AIR VOLUME)* 10" WG (OPERATING PRESSURE)* AMBIENT (OPERATING TEMPERATURE)

20,000 CFM Filt-Aire Portable Air Scrubber Sytem, Electric Skid Concept

DO NOT SCALE DRAWING

AS-20-042053SHEET 1 OF 2

UNLESS OTHERWISE SPECIFIED:

REVDRAWING. NO.

DESCRIPTION:NAME DATE

CHECKEDDRAWN

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: MACH .5 BEND 1TWO PLACE DECIMAL .06THREE PLACE DECIMAL .030

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF

INDUSTRIAL VACUUM EQUIPMENT CORP. ANY REPRODUCTION IN PART OR AS A

WHOLE WITHOUT THE WRITTEN PERMISSION OF INDUSTRIAL VACUUM

EQUIPMENT CORP. IS PROHIBITED.

REVISEDSPECIFICATIONS ARE SUBJECT TO CHANGE, WITHOUT NOTICE. REFER

TO QUOTE FOR SPECIFIC EQUIPMENT INFORMATION.

04.22.20TMM

-

101"

220"(244" WITH OPTIONAL CARBON ABSORBER SECTION)

5534"

11814" 1101

2"

13212"

101"

20,000 CFM Filt-Aire Portable Air Scrubber Sytem, Electric Skid Concept

DO NOT SCALE DRAWING

AS-20-042053SHEET 2 OF 2

TMM

UNLESS OTHERWISE SPECIFIED:

REVDRAWING. NO.

DESCRIPTION:NAME DATE

CHECKEDDRAWN

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: MACH .5 BEND 1TWO PLACE DECIMAL .06THREE PLACE DECIMAL .030

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF

INDUSTRIAL VACUUM EQUIPMENT CORP. ANY REPRODUCTION IN PART OR AS A

WHOLE WITHOUT THE WRITTEN PERMISSION OF INDUSTRIAL VACUUM

EQUIPMENT CORP. IS PROHIBITED.

REVISEDSPECIFICATIONS ARE SUBJECT TO CHANGE, WITHOUT NOTICE. REFER

TO QUOTE FOR SPECIFIC EQUIPMENT INFORMATION.

04.22.20TMM

-