2 humbuckers | 2 volumes 2 tones | 3 way toggle · 2 humbuckers | 2 volumes 2 tones ... hurts our...
Post on 01-Apr-2018
223 Views
Preview:
TRANSCRIPT
2 HUMBUCKERS | 2 VOLUMES
2 TONES | 3 WAY TOGGLE
Solder = location for ground (earth) connections.
Here at Seymour Duncan, we encourage you to use and share these wiring diagrams freely. But, it really hurts our feelings if you use them in commercial use without prior written permission. Switching the wiring of your guitar is a practically free way to get new tones out of your guitar... Now go have fun!
Tip (hot output)
Sleeve (ground). The inner, circular portion of the jack
Output Jack
Solder
Solder
Bridge Ground Wire
.047cap
Solder .047cap
Solder
Solder
Solder
Solder
Solder
Solder
Volume500k push/pull
Volume500k push/pull
Tone500k
Tone500k
Red & White wires get soldered together and taped off.
Red & White wires get soldered
together and taped off.
Neck Pickup
Bridge Ground Wire
Bridge Pickup
(earth) connections.
VolumeVolumeV500k push/pull
Red & White wires get soldered Red & White wires get soldered Red & White wires get soldered Red & White wires get soldered together and taped oftogether and taped oftogether and taped of
Neck Pickup
top related