16a and 32a totally modular multi ... - rotasoc catalogue.pdf · non-rewirable 32a in-feed...
Post on 18-Oct-2020
22 Views
Preview:
TRANSCRIPT
16A and 32A totally modular multi-socket powerdistribution with 360˚ rotatable socket outlets
24
Tel: 01207 503400Fax: 01207 501799Email: sales@electrak.co.uk
Because of our policy of continuous improvement, Electrak reserves theright to change product specification without notice.
www.electrak.co.uk
in this section:
standardlow noisedual
25
modules just push fit and lock together
26
Fully 360˚ rotatable socket outlets (on or off load)
Totally modular in design, additional socket modules can be simply added
Modules securely lock together by cam-lock lever
All sockets are busbar interconnected (no terminals, no soldering)
Maximum rating 32A
Manufactured from high quality materials
Conforms to BS7671:2001 Section 607 High Protective Conductor Currents
Integrated Telecommunications and Data modules
The total solution for all types of workstations
Standard power system
Low noise (clean earth) system
Dual power system (standard and low noise together)
Cam-lock system - modules simply push fit together
and are secured to each other by cam-lock lever.
Patented rotational socket (GB 2330700)
and patented locking fuse (GB 2330955).
Other international patents pending.
‘cam-lock’ lever system secure and innovative
integral touch-proof fusing
21
43
BSI KitemarkCertified
Quality AssurancesIS0 9001 Approved
27
Range of desk top modules
in aluminium extrusion
Power for racks (19” panels)
4, 5 or 6 sockets horizontal
any combination vertical
Rotasoc is a comprehensive modular power system
designed to meet the increasing power and
communication needs of the workplace. Its many unique
design features allow rapid configuration and changes or
relocation of workstations. Due to its 3 main product
groupings – standard power, low noise power (clean
earth) and dual power (standard and low noise together),
Rotasoc can be used in various environments including
those where an uninterrupted power supply is critical.
In today’s workplace, due to office aesthetics, space
restrictions and health and safety requirements, cable
management needs to be carefully planned. Rotasoc
facilitates easy and safe accommodation of large
amounts of cables and bulky transformers as each socket
can rotate 360° in either direction.
Rotasoc modules are designed for speed of
installation – they can be factory configured or
assembled in situ. The modularity of the system
permits units to be expanded easily and safely
for increased power demand. When additional
power is required, the modules can be simply
pushed together and locked using the ‘cam-lock’
lever system. Modules are colour coded and
keyed to ensure the three product types
cannot be inadvertently
mixed when additional
modules are attached.
32A desk unit with MCBprotection and Electrak 24 tap-off
In-feed modules can be safely connected to the power
supply prior to workstation installation, allowing circuits
to be electrically tested, signed off and carpets laid.
Telecom/data modules can be locked onto power
modules to form one unit, but wired separately or used
as stand alone units. Using the dual power system,
overall length can be minimised utilising one In-feed
module.
16A systems can be upgraded to 32A by simply
changing the infeed module and supply cables to 32A in
addition to any interconnection modules, which may be
on the system, to 32A.
Ease of installation is further permitted by the use of the
central through fixing method, which allows the modules
to be easily installed onto all types of fixing surfaces.
All these features permit dealer support workstations
to be reconfigured to dealer workstations in minutes
using additional power modules, thereby keeping time
and costs to a minimum.
contactFor specific applications please contact:
Sales on 01207 503 400 or sales@electrak.co.uk
the Rotasoc system
32A dealer desk configuration
28
MCB 6A, 16A, 20A or 32A 30mA RCD or 16A, 20A or 32A RCBO
Neon & BS 1362 fuseBS 1362 fuse
2 gang socket unfused 3 gang socket unfused 4 gang socket unfused
protection
sockets
External earth kit
For bonding In-feedto furniture
Switch/neon & BS 1362 fuse
32A in-feed non-rewirable
32A in-feedrewirable
In-feed 32A
System end cap
This module is used to cover theend of the last socket moduleunless a Communication moduleis fitted.
These modules are available in 2, 3 and 4 gang options. They can be connected to each other to give any combination of sockets.Individual fused socket modules can also be used with 32A in-feeds.
32A flexible interconnection
32A Interconnection modules are suppliedwith 4mm2 x 3 singles in conduit and areused to interconnect between units withinthe 32A range of products.
Protection modules are utilised for the protection and switching ofcircuits from the 32A In-feed modules where required. Customer toselect fuse or breaker sizes.
32A In-feed modules connect to the power supply via a powertrack tap off or SWA cable. Both have additional external earthconnections. The non-rewirable In-feed module requires customerto specify the type of tap off or SWA cable connection for factoryfitting. 32A In-feed modules are non-switched and non-fused.
32A system components
16A or 32A filter
29
sockets
product configuration
1 Select the type of distribution system - standard, low noise or dual
2 Select the means of powering the system - cable or power track tap-off
3 Select the type of in-feed module to match the cable capacity - 16A or 32A
4 Select the means of protection
5 Select the number of socket modules from the 2, 3, 4, gang range (individually fused or non-fused)
6 Select the interconnection units if required
7 Finish system with the end cap
(All modules push fit and lock together on-site or can be factory assembled to customer requirement).
in-feed 16A
External earth kit
For bonding In-feedto furniture
System end cap
This module is used to cover theend of the last socket moduleunless a communication module is fitted.
2 gang socket unfused 3 gang socket unfused 4 gang socket unfused
2 gang socket fused 3 gang socket fused 4 gang socket fused
16A flexible interconnection
16A Interconnection modules are suppliedwith 1.5mm2 x 3 core flexible cable andused to interconnect between units withinthe 16A range of products.
16A system components
These modules are available in 2, 3 and 4 gang options. They canbe connected to each other to give any combination of sockets.The range is available with individual 3.15A or 5A fuses withineach socket to meet BS6396.
16A In-feed modules are rewirable or supplied witha 3 core flexible cable with a BS1363 13A plug.MCB and RCD protection modules can also beused with 16A In-feeds.
16A in-feed fused 16A in-feed switch/neon 16A in-feed switched/neon and fused
16A in-feed Neon16A in-feed
30
in-built innovation and versatility
examples
32A in-feed with Electrak tap-off
ProtectionBS 1362 fused
and neon
Systemend cap
4 gang unfused sockets
16A in-feed with cable &
13A BS1363 plug 4 gangfused sockets
2 gangfused sockets
Systemend cap
The Rotasoc system comprises of three product groups: -
Standard Power
Low Noise Power (clean earth)
Dual Power (standard and low noise together)
All product groups are fully approved by BSI with the
range carrying the BSI Kitemark. The system conforms to
BS7671 section 607 High Protective Conductor Currents
where leakage onto earth is in excess of 3.5mA.
The Rotasoc system comprises of units made up from a
number of self contained flame retardant ABS
modules. Each module contains from three to six vertically
stacked 32A busbar conductors, which distribute power to
each socket outlet with each socket able to rotate 360° in
both directions facilitating optimal cable management.
All modules are ultrasonically welded together for high
electrical and mechanical integrity, with no integral
serviceable terminals apart from the rewirable In-feeds
therefore maintenance is minimal.
Rotasoc modules incorporate a secure and innovative
locking device ‘Cam-Lock’ Lever System. This provides
safe and reliable interlocking of the modules but easy tool
release should more modules need to be added, thus
making Rotasoc a truly modular and flexible system.
Integral touch-proof fusing incorporated into the centre of
the unique and patented rotating socket outlet is used to
comply with BS6396 where units are connected to the
power supply via a BS1363 13A three-pin plug. (All other
applications not using a power supply with a BS1363 13A
three-pin plug do not have to comply with this standard).
Rotasoc modules can be inter-linked to other remote units
by using the Interconnection module, which is supplied
with flexible cable, the length of which is determined by
the customer. These modules then just plug into the end
of each power module and are locked together by the
cam-lock lever.
A major benefit to the speed of installation is the capability
of connecting the In-feed modules to the power supply
prior to the workstation arriving. This allows the electrical
contractor to test and sign off the circuit continuity, leaving
the socket modules to be simply fitted at the most
convenient time during or after the workstation is installed.
1 2
llllllllllllllllllllllllllllllllllllllllllllllllllllll lllllllll
lllllllllll
llllllll
llllll
llllll
llllll
llllll
lllllli
iiiiilRaised Floor Floor Grommet
In-feed and Power Modulepush together and lock withcam lock lever
Tap-off and In-feed pulled through FloorGrommet after testing and when required
32A In-feed connected to Tap-off andleft underfloor until required
Underfloor Power Track
Tap-off
31
buyer’s guidestandard power distribution (grey socket outlets) 2P+E
CAT NO. DESCRIPTION
16A In-feed Modules rewirable
RAB201A 16A In-feed Module Non-Switched/Non-Fused
RAB202A 16A In-feed Module Neon Power Indication
RAB203A 16A In-feed Module Switch Neon
RAB204A 16A In-feed Module Switch Neon/6.3A Fused
RAB205A 16A In-feed Module 6.3A Fused
16A In-feed Module c/w cable and plug
Non Switched and Non Fused
RAB002A 2m 13A BS1363 Plug to RAB201A 16A In-feed Module
RAB003A 3m 13A BS1363 Plug to RAB201A 16A In-feed Module
RAB004A 4m 13A BS1363 Plug to RAB201A 16A In-feed Module
RAB005A 5m 13A BS1363 Plug to RAB201A 16A In-feed Module
Neon Indication
RAB006A 2m 13A BS1363 Plug to RAB202A 16A In-feed Module
RAB007A 3m 13A BS1363 Plug to RAB202A 16A In-feed Module
RAB008A 4m 13A BS1363 Plug to RAB202A 16A In-feed Module
RAB009A 5m 13A BS1363 Plug to RAB202A 16A In-feed Module
Switched with Neon
RAB010A 2m 13A BS1363 Plug to RAB203A 16A In-feed Module
RAB011A 3m 13A BS1363 Plug to RAB203A 16A In-feed Module
RAB012A 4m 13A BS1363 Plug to RAB203A 16A In-feed Module
RAB013A 5m 13A BS1363 Plug to RAB203A 16A In-feed Module
Switched/Neon and 6.3A Fused
RAB014A 2m 13A BS1363 Plug to RAB204A 16A In-feed Module
RAB015A 3m 13A BS1363 Plug to RAB204A 16A In-feed Module
RAB016A 4m 13A BS1363 Plug to RAB204A 16A In-feed Module
RAB017A 5m 13A BS1363 Plug to RAB204A 16A In-feed Module
6.3A Fused
RAB018A 2m 13A BS1363 Plug to RAB205A 16A In-feed Module
RAB019A 3m 13A BS1363 Plug to RAB205A 16A In-feed Module
RAB020A 4m 13A BS1363 Plug to RAB205A 16A In-feed Module
RAB021A 5m 13A BS1363 Plug to RAB205A 16A In-feed Module
32A In-feed Module rewirable
RAB301A 32A 2P+E rewirable In-feed Module
32A In-feed Modules non-rewirable c/w Electrak standard Tap-off
RAB311A 32A In-feed Module c/w E24 3m unfused metal Tap-off DP1332
RAB312A 32A In-feed Module c/w E24 5m unfused metal Tap-off DP1532
RAB315A 32A In-feed Module c/w E24 3m 13A fused 607 metal Tap-off DP1327
RAB316A 32A In-feed Module c/w E24 5m 13A fused 607 metal Tap-off DP1527
RAB340A 32A In-feed Module c/w E24 3m unfused VO Nylon Tap-off DV1332
RAB341A 32A In-feed Module c/w E24 5m unfused VO Nylon Tap-off DV1532
RAB344A 32A In-feed Module c/w E24 3m 13A fused 607 VO Nylon Tap-off DV1327
RAB345A 32A In-feed Module c/w E24 5m 13A fused 607 VO Nylon Tap-off DV1527
16A and 32A External Earth Kit
RAZ010A 250mm x 1.5mm2 Earth Cable Kit c/w fixings for 16A Infeed
RAZ020A 250mm x 4.0mm2 Earth Cable Kit c/w fixings for 32A Infeed
CAT NO. DESCRIPTION
Protection Modules
RAB401A BS1362 Fuse Protection Module
RAB402A BS1362 Fuse and Switch Neon Protection Module
RAB403A BS1362 Fuse and Neon Protection Module
RAB410A 6A MCB Module
RAB420A 16A MCB Module
RAB430A 20A MCB Module
RAB440A 32A MCB Module
RAB450A 16A Residual Current Breaker Overload protection
RAB460A 20A Residual Current Breaker Overload protection
RAB470A 32A Residual Current Breaker Overload protection
RAB404A 32A max Single Isolation Module
RAB405A RCD Module 30mA
RAB480A 16A Filter Module
RAB490A 32A Filter Module
Socket Modules
RAB502A 2 Gang Non-Fused Socket Module Black/Grey
RAB503A 3 Gang Non-Fused Socket Module Black/Grey
RAB504A 4 Gang Non-Fused Socket Module Black/Grey
RAB532A 2 Gang Individually 3.15A Fused Socket Module Black/Grey
RAB533A 3 Gang Individually 3.15A Fused Socket Module Black/Grey
RAB534A 4 Gang Individually 3.15A Fused Socket Module Black/Grey
RAB552A 2 Gang Individually 5A Fused Socket Module Black/Grey
RAB553A 3 Gang Individually 5A Fused Socket Module Black/Grey
RAB554A 4 Gang Individually 5A Fused Socket Module Black/Grey
16A Interconnection Modules
RAB603A 0.3m 16A Male to Female Interconnection Module
RAB605A 0.5m 16A Male to Female Interconnection Module
RAB610A 1m 16A Male to Female Interconnection Module
RAB620A 2m 16A Male to Female Interconnection Module
RAB630A 3m 16A Male to Female Interconnection Module
RAB640A 4m 16A Male to Female Interconnection Module
RAB650A 5m 16A Male to Female Interconnection Module
32A Interconnection Modules
RAB703A 0.3m 32A Male to Female Interconnection Module
RAB705A 0.5m 32A Male to Female Interconnection Module
RAB710A 1m 32A Male to Female Interconnection Module
RAB720A 2m 32A Male to Female Interconnection Module
RAB730A 3m 32A Male to Female Interconnection Module
RAB740A 4m 32A Male to Female Interconnection Module
RAB750A 5m 32A Male to Female Interconnection Module
End Cap
RAZ001A End Cap
32
buyer’s guidelow noise (clean earth) power distribution (red socket outlets) 16A, 2P+CE 32A, 2P+E+CE
CAT NO. DESCRIPTION
16A In-feed Modules rewirable
RAC201A 16A In-feed Module Non-Switched/Non-Fused
RAC202A 16A In-feed Module Neon Power Indication
RAC203A 16A In-feed Module Switch Neon
RAC204A 16A In-feed Module Switch Neon/6.3A Fused
RAC205A 16A In-feed Module 6.3A Fused
16A In-feed Module c/w cable and plug
Non Switched and Non Fused
RAC002A 2m 13A BS1363 Plug to RAC201A 16A In-feed Module
RAC003A 3m 13A BS1363 Plug to RAC201A 16A In-feed Module
RAC004A 4m 13A BS1363 Plug to RAC201A 16A In-feed Module
RAC005A 5m 13A BS1363 Plug to RAC201A 16A In-feed Module
Neon Indication
RAC006A 2m 13A BS1363 Plug to RAC202A 16A In-feed Module
RAC007A 3m 13A BS1363 Plug to RAC202A 16A In-feed Module
RAC008A 4m 13A BS1363 Plug to RAC202A 16A In-feed Module
RAC009A 5m 13A BS1363 Plug to RAC202A 16A In-feed Module
Switched with Neon
RAC010A 2m 13A BS1363 Plug to RAC203A 16A In-feed Module
RAC011A 3m 13A BS1363 Plug to RAC203A 16A In-feed Module
RAC012A 4m 13A BS1363 Plug to RAC203A 16A In-feed Module
RAC013A 5m 13A BS1363 Plug to RAC203A 16A In-feed Module
Switched/Neon and 6.3A Fused
RAC014A 2m 13A BS1363 Plug to RAC204A 16A In-feed Module
RAC015A 3m 13A BS1363 Plug to RAC204A 16A In-feed Module
RAC016A 4m 13A BS1363 Plug to RAC204A 16A In-feed Module
RAC017A 5m 13A BS1363 Plug to RAC204A 16A In-feed Module
6.3A Fused
RAC018A 2m 13A BS1363 Plug to RAC205A 16A In-feed Module
RAC019A 3m 13A BS1363 Plug to RAC205A 16A In-feed Module
RAC020A 4m 13A BS1363 Plug to RAC205A 16A In-feed Module
RAC021A 5m 13A BS1363 Plug to RAC205A 16A In-feed Module
32A In-feed Module rewirable
RAC301A 32A 2P+E rewirable In-feed Module
32A In-feed Module c/w Electrak Low-noise Tap-off
RAC311A 32A In-feed Module c/w E25 3m unfused metal Tap-off JP2332
RAC312A 32A In-feed Module c/w E25 5m unfused metal Tap-off JP2532
RAC315A 32A In-feed Module c/w E25 3m 13A fused 607 metal Tap-off JP2327
RAC316A 32A In-feed Module c/w E25 5m 13A fused 607 metal Tap-off JP2527
RAC340A 32A In-feed Module c/w E25 3m unfused VO Nylon Tap-off JV2332
RAC341A 32A In-feed Module c/w E25 5m unfused VO Nylon Tap-off JV2532
RAC344A 32A In-feed Module c/w E25 3m 13A fused 607 VO Nylon Tap-off JV2327
RAC345A 32A In-feed Module c/w E25 5m 13A fused 607 VO Nylon Tap-off JV2527
16A and 32A External Earth Kit
RAZ010A 250mm x 1.5mm2 Earth Cable Kit c/w fixings for 16A Infeed
RAZ020A 250mm x 4.0mm2 Earth Cable Kit c/w fixings for 32A Infeed
CAT NO. DESCRIPTION
Protection Modules
RAC401A BS1362 Fuse Protection Module
RAC402A BS1362 Fuse and Switch Neon Protection Module
RAC403A BS1362 Fuse and Neon Protection Module
RAC410A 6A MCB Module
RAC420A 16A MCB Module
RAC430A 20A MCB Module
RAC440A 32A MCB Module
RAC450A 16A Residual Current Breaker Overload protection
RAC460A 20A Residual Current Breaker Overload protection
RAC470A 32A Residual Current Breaker Overload protection
RAC404A 32A max Single Isolation Module
RAC405A RCD Module 30mA
RAC480A 16A Filter Module
RAC490A 32A Filter Module
Socket Modules
RAC502A 2 Gang Non-Fused Socket Module Black/Red
RAC503A 3 Gang Non-Fused Socket Module Black/Red
RAC504A 4 Gang Non-Fused Socket Module Black/Red
RAC532A 2 Gang Individually 3.15A Fused Socket Module Black/Red
RAC533A 3 Gang Individually 3.15A Fused Socket Module Black/Red
RAC534A 4 Gang Individually 3.15A Fused Socket Module Black/Red
RAC552A 2 Gang Individually 5A Fused Socket Module Black/Red
RAC553A 3 Gang Individually 5A Fused Socket Module Black/Red
RAC554A 4 Gang Individually 5A Fused Socket Module Black/Red
16A Interconnection Modules
RAC603A 0.3m 16A Male to Female Interconnection Module
RAC605A 0.5m 16A Male to Female Interconnection Module
RAC610A 1m 16A Male to Female Interconnection Module
RAC620A 2m 16A Male to Female Interconnection Module
RAC630A 3m 16A Male to Female Interconnection Module
RAC640A 4m 16A Male to Female Interconnection Module
RAC650A 5m 16A Male to Female Interconnection Module
32A Interconnection Modules
RAC703A 0.3m 32A Male to Female Interconnection Module
RAC705A 0.5m 32A Male to Female Interconnection Module
RAC710A 1m 32A Male to Female Interconnection Module
RAC720A 2m 32A Male to Female Interconnection Module
RAC730A 3m 32A Male to Female Interconnection Module
RAC740A 4m 32A Male to Female Interconnection Module
RAC750A 5m 32A Male to Female Interconnection Module
End Cap
RAZ001A End Cap
33
buyer’s guidedual power distribution (standard & low noise) 4P+E+CE
CAT NO. DESCRIPTION
16A In-feed Modules rewirable
RAD201A 16A In-feed Module Non-Switched/Non-Fused
RAD202A 16A In-feed Module 2 x Neon Power Indication
RAD203A 16A In-feed Module 2 x Switch Neon
RAD204A 16A In-feed Module 2 x 6.3A Fused
16A In-feed Module c/w cable and plug
Non Switched and Non Fused
RAD002A 2x 2m 13A BS1363 Plug to RAD201A 16A In-feed Module
RAD003A 2x 3m 13A BS1363 Plug to RAD201A 16A In-feed Module
RAD004A 2x 4m 13A BS1363 Plug to RAD201A 16A In-feed Module
RAD005A 2x 5m 13A BS1363 Plug to RAD201A 16A In-feed Module
Neon Indication
RAD006A 2x 2m 13A BS1363 Plug to RAD202A 16A In-feed Module
RAD007A 2x 3m 13A BS1363 Plug to RAD202A 16A In-feed Module
RAD008A 2x 4m 13A BS1363 Plug to RAD202A 16A In-feed Module
RAD009A 2x 5m 13A BS1363 Plug to RAD202A 16A In-feed Module
Switched with Neon
RAD010A 2x 2m 13A BS1363 Plug to RAD203A 16A In-feed Module
RAD011A 2x 3m 13A BS1363 Plug to RAD203A 16A In-feed Module
RAD012A 2x 4m 13A BS1363 Plug to RAD203A 16A In-feed Module
RAD013A 2x 5m 13A BS1363 Plug to RAD203A 16A In-feed Module
6.3A Fused
RAD014A 2x 2m 13A BS1363 Plug to RAD204A 16A In-feed Module
RAD015A 2x 3m 13A BS1363 Plug to RAD204A 16A In-feed Module
RAD016A 2x 4m 13A BS1363 Plug to RAD204A 16A In-feed Module
RAD017A 2x 5m 13A BS1363 Plug to RAD204A 16A In-feed Module
32A In-feed Module rewirable
RAD301A 32A 4P+2E rewirable In-feed Module
32A In-feed Module c/w Electrak Tap-offs
RAD311A 32A In-feed Module c/w E26 3m unfused metal Tap-off KP3328
RAD312A 32A In-feed Module c/w E26 5m unfused metal Tap-off KP3528
RAD313A 32A In-feed Module c/w E26 3m unfused metal Tap-off DP1332+JP2332
RAD314A 32A In-feed Module c/w E26 5m unfused metal Tap-off DP1532+JP2532
RAD319A 32A In-feed Module c/w E26 3m fused 607 Tap-off DP1327+JP2327
RAD320A 32A In-feed Module c/w E26 5m fused 607 Tap-off DP1527+JP2527
RAD340A 32A In-feed Module c/w E26 3m unfused VO Nylon Tap-off KV3328
RAD341A 32A In-feed Module c/w E26 5m unfused VO Nylon Tap-off KV3528
RAD342A 32A In-feed Module c/w E26 3m unfused VO Nylon Tap-off DV1332+JV2332
RAD343A 32A In-feed Module c/w E26 5m unfused VO Nylon Tap-off DV1532+JV2532
RAD348A 32A In-feed Module c/w E26 3m 13A fused 607 Tap-off DV1327+JV2327
RAD349A 32A In-feed Module c/w E26 5m 13A fused 607 Tap-off DV1527+JV2527
16A and 32A External Earth Kit
RAZ010A 250mm x 1.5mm2 Earth Cable Kit c/w fixings for 16A Infeed
RAZ020A 250mm x 4.0mm2 Earth Cable Kit c/w fixings for 32A Infeed
CAT NO. DESCRIPTION
Protection Modules
RAD401A 2x Fuse Protection Module
RAD402A 2x Switch Neon Module
RAD403A 2x Neon Module
RAD410A 6A MCB Module
RAD420A 16A MCB Module
RAD430A 20A MCB Module
RAD440A 32A MCB Module
Socket Modules Non-Fused
RAD502A 2 Gang Socket Module Standard/Clean Bypass
RAD503A 3 Gang Socket Module Standard/Clean Bypass
RAD504A 4 Gang Socket Module Standard/Clean Bypass
RAD512A 2 Gang Socket Module Clean/Standard Bypass
RAD513A 3 Gang Socket Module Clean/Standard Bypass
RAD514A 4 Gang Socket Module Clean/Standard Bypass
Individually Fused Socket Modules
RAD532A 2 Gang Fused 3.15A Sockets Standard/Clean Bypass
RAD533A 3 Gang Fused 3.15A Sockets Standard/Clean Bypass
RAD534A 4 Gang Fused 3.15A Sockets Standard/Clean Bypass
RAD542A 2 Gang Fused 3.15A Sockets Clean/Standard Bypass
RAD543A 3 Gang Fused 3.15A Sockets Clean/Standard Bypass
RAD544A 4 Gang Fused 3.15A Sockets Clean/Standard Bypass
RAD552A 2 Gang Fused 5A Sockets Standard/Clean Bypass
RAD553A 3 Gang Fused 5A Sockets Standard/Clean Bypass
RAD554A 4 Gang Fused 5A Sockets Standard/Clean Bypass
RAD562A 2 Gang Fused 5A Sockets Clean/Standard Bypass
RAD563A 3 Gang Fused 5A Sockets Clean/Standard Bypass
RAD564A 4 Gang Fused 5A Sockets Clean/Standard Bypass
16A Interconnection Modules
RAD603A 0.3m 16A Male to Female Interconnection Module
RAD605A 0.5m 16A Male to Female Interconnection Module
RAD610A 1m 16A Male to Female Interconnection Module
RAD620A 2m 16A Male to Female Interconnection Module
RAD630A 3m 16A Male to Female Interconnection Module
RAD640A 4m 16A Male to Female Interconnection Module
RAD650A 5m 16A Male to Female Interconnection Module
32A Interconnection Modules
RAD703A 0.3m 32A Male to Female Interconnection Module
RAD705A 0.5m 32A Male to Female Interconnection Module
RAD710A 1m 32A Male to Female Interconnection Module
RAD720A 2m 32A Male to Female Interconnection Module
RAD730A 3m 32A Male to Female Interconnection Module
RAD740A 4m 32A Male to Female Interconnection Module
RAD750A 5m 32A Male to Female Interconnection Module
End Cap
RAZ001A End Cap
34
This system is used for distribution of communications either with patch leads supplied or direct on site wiring.
Catalogue No. Communications Modules
These modules are for in line socket connection and are rewirable. They can
be supplied with pre-terminated leads. Customer to specify length of cable
and type of connectors if required.
RAF 101A 4 Way Communications module for 50/25mm face plate
RAF 102A 4 Way Communications module for 50/25mm face plate with conduit entry
RAF 103A 4 Way Communications module for 37/22mm face plate
RAF 104A 4 Way Communications module for 37/22mm face plate with conduit entry
These modules are standalone and therefore will not connect with the Rotasoc
sockets. They are rewirable and can be supplied with pre-terminated leads.
Customer to specify length of cable and type of connectors if required.
RAF 210A Standalone 4 Way Communications module for 50/25mm face plate
RAF 211A Standalone 4 Way Communications module for 50/25mm face plate with
conduit entry
RAF 212A Standalone 4 Way Communications module for 37/22mm face plate
RAF 213A Standalone 4 Way Communications module for 37/22mm face plate with
conduit entry
Catalogue No. Communications Modules Category 6 Compliant
These modules are for in line socket connection and are rewirable. They can
be supplied with pre-terminated leads. Customer to specify length of cable.
Only Krone Cat 6 UTP module RJ-KCL part number 6006031 connectors
can be used
RAF 107A 4 Way Communications module for 37/22mm face plate
RAF 108A 4 Way Communications module for 37/22mm face plate with conduit entry
These modules are standalone and therefore will not connect with the Rotasoc
sockets. They are rewirable and can be supplied with pre-terminated leads.
Customer to specify length of cable. Only Krone connector can be used as above.
RAF 214A Standalone 4 Way Communications module for 37/22mm face plate
RAF 215A Standalone 4 Way Communications module for 37/22mm face plate
with conduit entry
communications distribution
35
Catalogue No.
RAK001 2 gang individually 3.15A fused socket unit c/w 1m interconnection flexible lead
RAK002 3 gang individually 3.15A fused socket unit c/w 1m interconnection flexible lead
RAK003 4 gang individually 3.15A fused socket unit c/w 1m interconnection flexible lead
RAK010 2 gang non-fused socket unit c/w 1m interconnection flexible lead
RAK011 3 gang non-fused socket unit c/w 1m interconnection flexible lead
RAK012 4 gang non-fused socket unit c/w 1m interconnection flexible lead
RAK020 2 gang individually 3.15A fused socket unit c/w 3m of flexible cable and BS1363 plug
RAK021 3 gang individually 3.15A fused socket unit c/w 3m of flexible cable and BS1363 plug
RAK022 4 gang individually 3.15A fused socket unit c/w 3m of flexible cable and BS1363 plug
RAK030 2 gang non-fused socket unit c/w 3m of flexible cable and BS1363 plug
RAK031 3 gang non-fused socket unit c/w 3m of flexible cable and BS1363 plug
RAK032 4 gang non-fused socket unit c/w 3m of flexible cable and BS1363 plug
Range of desk top modules in aluminium
extrusion which simply clamp onto desk top
desk top units
2 gang desktop unit
Desk top unit connecting directly into under-desk socket module
Brackets fit desk top thickness 25mm to 38mm
Other brackets to customer specification
Desk top unit connecting
to power via BS1363 plug
3 gang desktop unit
36
Power modules in aluminium extrusion. Units are made to customer specification.
Power and communicationmodules in one unit
Catalogue No. Standard Grey Sockets 2P+E
RAL001 2 gang individually 3.15A fused socket unit c/w 3m flexible cable and BS1363 plug
RAL002 3 gang individually 3.15A fused socket unit c/w 1m interconnecting unit
Low Noise Red Sockets 2P+CE
RAL010 2 gang individually 3.15A fused socket unit c/w 3m flexible cable and BS1363 plug
RAL011 3 gang individually 3.15A fused socket unit c/w 1m interconnecting unit
vertical desk top units
Vertical desk top unit is secured
with M10 bolt through desk top
2 gang 205mm high
3 gang 265mm high
37
Reference must be made to all relevant and associated standards.
BS6396: 2002 Electrical systems in office furniture and office screens.
BS7671: 2001 Requirements for Electrical Installation
(IEE Wiring Regulations 16th Edition)
Electricity at Work Regulations 1989
Health and Safety Legislation.
Below is a brief outline of the main criteria within the standards:
BS6396: 2002 was published with regard to the use of electrical
equipment within general office furniture and screens. This standard
sets out in its scope the use and testing of electrical socket outlets
and associated wiring when used together with a 13A BS1363 fused
plug and makes provision for the routing of cables through furniture.
For compliance with this standard socket outlet configurations 2, 3 or 4
outlets should be individually fused @ 5A and 5 or 6 outlets individually
fused @ 3.15A.
BS7671: 2001 16th edition. The Health and Safety Executive states
that installations which conform to the standards laid down in BS7671:
2001 are regarded by the HSE as likely to achieve conformity with the
relevant parts of The Electricity at Work Regulations 1989.
Special note should be taken of Section 607 within BS7671: 2001
Earthing requirements for the installation of equipment having high
protective conductor currents.
Section 607 has particular importance when there is a requirement for
a quantity of information technology equipment being supplied from a
final circuit in a location where the protective current exceeds 3.5mA in
normal use. Due to current in the protective conductor arising from the
use of IT equipment, there is a requirement to provide a mechanically
protected 4mm2 conductor (607-02-04(ii)). Rotasoc achieves this when
wired in accordance with the installation sheets by providing
mechanically protected 5mm2 earth conductors within the product.
BSI Kitemark Licence approved to BS5733 and BS1363 part 2
Manufacturing approved to ISO9001:2002
Quality Assurance Certificate No.10270
Electrical test data
Rated Current 32A
Rated Voltage 230V~
Frequency 50/60Hz
Conductor resistance
2 Socket module 0.6mΩ
3 Socket module 0.9mΩ
4 Socket module 1.2mΩ
Volt drop
Live & neutral
2 Socket module 1.2mV/A
3 Socket module 1.8mV/A
4 Socket module 2.4mV/A
Protection module 4.0m/V/A
In-feed 16A 6.0mV/A
+1.5mm2 29mV/A/m
32A 2.5mV/A
+4mm2 11mV/A/m
Interconnection 16A/32A 2.0mV/A
+1.5mm2 29mV/A/m
+4mm2 11mV/A/m
Earth Fault loop impedance
2 Socket module 1.2mΩ
3 Socket module 1.8mΩ
4 Socket module 2.4mΩ
Protection module 4.0mΩ
In-feed 16A 6.0mΩ
+1.5mm2 29mΩ/m
32A 2.5mΩ
+4mm2 11mΩ/m
Interconnection 16A/32A 2.0mΩ
+1.5mm2 29mΩ/m
+4mm2 11mΩ/m
Mechanical Data
Number of conductors 3-6
Busbar conductor cross sectional area 5mm2
16A Rewirable In-feed terminal capacity 1.5mm2
32A Rewirable In-feed terminal capacity 6mm2
Material Specification
Module Housing VØ Flame retardant ABS
Socket Outlets Polycarbonate
Busbars & socket rings High conductivity copper C101
Other metalwork Phosphor bronze PB102
technical information British standards
38
to connect and disconnect Rotasoc modules:
1. Connection/disconnection to be made by a competent person only
2. Check that both Male and Female ends have same colour coded Bus-bar Shield
3. Turn modules over and release the Red Cam-lock lever with a small screwdriver
into upright position
4. Locate Male and Female ends and push together until fully closed
5. Press the Red Cam-lock lever over until flush with the casing to lock
the modules together
6. To disconnect, reverse the procedure
Rotasoc installation instructions
to fix modules to surface:
1. Flip up all rubber Screw Cover Caps with flat blade screwdriver
2. Insert through all holes a No 8 pozi-pan screw or M4 bolt to required length
3. Tighten screw/bolt down to mounting surface
4. Push rubber Screw Cover Caps down
39
501.6
95.3* 250.8* 131*
Note: All modules are 60mm wide. All dimensions are in millimetres.*Fixing hole dimensions.
95.316A In-feed Module
33.1 High
11732A In-feed Module
36 High
79.3BS 1362 Protection Module
56.1 High
1312 Gang Socket Module
32.9 High
171.7Data Module
(Connects to power module)41.3 High
190.93 Gang Socket Module
32.9 High
250.84 Gang Socket Module
32.9 High
162.5MCB, RCD Protection Module
81.6 High
24.5End Cap31 High
8.5162.28.5
44.8 44.516A & 32A Interconnection
35.7 High
24.5
24.6
195.3Standalone Data Module
41.3 High
162.2
Data Modulefixing hole undercable/conduit grip
fixing dimensions
16A unit made up from 16A in-feed, 4 gang & 2 gang socket modules and end cap.
example
162.516A & 32A Filter Module
52 High
Quality AssuranceISO 9001 Approved
BSI KitemarkCertified
top related