1485-in002_-en-p

Post on 02-Feb-2016

216 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

DESCRIPTION

Devicenet box

TRANSCRIPT

1

����������������� �������������������� ���™���

IMPORTANT: This document provides installation instructions for the 8-Port DeviceBox tap. Also attachedare wiring diagrams and mounting dimensions for the 2- and 4-Port DeviceBox™.

Features

� Passive

� 2-, 4- or 8-Port

� Cage clamp terminal strip connections

� Cord grip openings

DescriptionDeviceBox taps are passive sealed junction boxes offered in a2-, 4-, or 8-port configuration. DeviceBox taps offer directconnection onto a trunk line for up to 8 physical nodes usingcage clamp terminal strip connections.

Specifications

����������������� ������������������ ������� �

����������������� �������������������������������

��!�"�#����� ������� ���!��"����#�$��������� �%&'(�)*��+*���������)

�������������������� ���������!�������)� ������ �

������$������� ,���"�-��.�����

Figure 1: 8-Port DeviceBox TapPart Number: 1485P–P8T5–T5

Torque Settings

����%�&��

��� ������

#�������������'����(�������%�����)��&��

��*��)��+�&���,

)��&��-�����'-����������

����������� ���������

�� �����������

����������� ��������!"�� ������������� ��������#���� ��������$���� ��������%���� �����&���� �� �����"���� ��

)/���)/���'(�')�

*��+��

����������� �!+���0��1�23����

- -)�� �'�����2�3"�� �4���4�0��123����

, ,-.-)��.�'/-0��0�

1��+��

��)������� ���������

�� ����������

����������� ����������� ���������&�� ����5���� �� ����5"���� �� ��������� �� �����"���� �� �����&���� �� ����6���� ��

�.'���.�(/����-�

1��+�*

��)������� �!+���0��1�23����

'.'��-.-)1 �+ *

��)�2�3�"�� �4��4�0��1�23����

, ,'.'� -.-)/'0�-0�

1��+�*

�+���+7��"���8�

, ,0.����.��

/���0�,

Dimensions—mm (inches)

ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ

ÉÉ

���/���/���

�/����/��

�/���)/$�

$!��/$���

��!�!/!��

��/���/!��

������4��4�5��6�$���7������-�����-������������4��4��5��6����7������-�����-������

2

Figure 2: 8-Port DeviceBox TapWiring Diagram

U10

,���",

�8�9

����:

1���;

��

;��

:1���

9����

,�8�

,���"

;��:1���9����,�8�,���"

,���",�8�

9����:1���

;��

;�� ��<:1��� ����=,�8� ����>,���" ��??��

U8

U5U3

,���",

�8�9

����:

1���;

��

;��

:1���

9����

,�8�

,���"

U6U1

U9

U4

,���",

�8�9

����:

1���;

��

;��

:1���

9����

,�8�

,���"

,���",

�8�9

����:

1���;

��

;��

:1���

9����

,�8�

,���"

U7

U2

Note: Trunk Connections: U1, U6Drop Connections: U2, U4, U5, U7, U8, U9, U10

Figure 3: 2-Port DeviceBox TapPart Number: 1485P–P2T5–T5Dimensions—mm (inches)

��/$!��/$�

���/����/)�

�/���)/$�

$!��/$���

ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ

ÉÉ

��)/!��

�������4��4�5��6�$���7������-�����-�������������4��4��5��6����7������-�����-������

��/���/!��

Figure 4: 2-Port DeviceBox TapWiring Diagram

U4

U2

U3U1

,���"

,�8�

9����

:1���

;��

;��

:1���

9����

,�8�

,���"

;��

:1���

9����

,�8�

,���"

;�� ��<:1��� ����=,�8� ����>,���" ��??��

Note: Trunk Connections: U1, U3Drop Connections: U2, U4

,���"

,�8�

9����

:1���

;��

3

Figure 5: 4-Port DeviceBox TapPart Number: 1485P–P4T5–T5Dimensions—mm (inches)

���/���/���

�/���/��

�/���)/$�

ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ

É$!

��/$���

��!�!/!��

��/���/!��

�������4��4�5��6�$���7������-�����-�������������4��4��5��6����7������-�����-������

Figure 6: 4-Port DeviceBox TapWiring Diagram

U10

,���",

�8�9

����:

1���;

��

;��

:1���

9����

,�8�

,���"

;��:1���9����,�8�,���"

,���",�8�

9����:1���

;��

;�� ��<:1��� ����=,�8� ����>,���" ��??��

U8

U5U3

,���",

�8�9

����:

1���;

��

;��

:1���

9����

,�8�

,���"

U6U1

Note: Trunk Connections: U1, U6Drop Connections: U8, U3, U10, U5

4

Figure 7: Recommended Cable Stripping for Installation into DeviceBox Tap

A

��7���@��"��!/�??���A�$���

��������.'/

����0 %�&�� ���?? ���������0%�&�� ���??������

���%�&�� ��??������

Figure 8: Wiring 8-Port DeviceBox Tap

��8������%8�

&����B���7���@��"����1�8�������8���(--��C/��A��

>�������6�����%8�

4��1�����6�����%8�

6�����%8�

������=�C

>��"����%8�

1. To install trunk cable into DeviceBox tap cut and strip grayPVC cable back approximately 4 inches (see Figure 7)and insert through large cable gland.

2. Loosen gland nut and insert cable until approximately 1/8inch of cable jacket protrudes.

3. Then firmly tighten gland nut to provide strain relief andsealing. Caution: The flange hex must be held with thecable gland wrench during tightening.

4. The bare wire ends should be firmly twisted to eliminateloose strands and each lead looped approximately asshown, to allow insertion into the clamping cavity of theterminal block. (See Figure 2 for color codes.)

. .

5. To attach cable to terminal strips, press down on cageclamp, insert wire and release cage clamp. Repeatprocess for remaining four wires.

6. To install drop cable into DeviceBox tap, cut and strip dropcable back approximately 2 inches (see Figure 7). Note:Repeat previous trunk cable instructions.

7. After all cables are terminated, the cover should beinstalled and securely tightened to ensure washdownrating. Seal unused drop positions with nylon plugs, o-ringseals, and nuts (included in accessory kit).

Follow same installation instructions for 2- and 4-portDeviceBox taps.

All external wiring should conform to the national electric codeand applicable local codes.ATTENTION: Be certain to use insulating tubing

(included in accessory kit) on bare drain wire.

Publication 75006-279-01(C)December 2004

Printed in USA

top related