amp net connect catalog full

PRODUCT CATALOG

AM

PN

ET

CO

NN

EC

TP

rod

uc

t Ca

talo

g

3/04

TM

ANFinalCover.qxd 3/18/2004 1:37 PM Page 2

VISIT OUR WEB SITE AT www.ampnetconnect.com

:: Instruction Sheets :: Cut Sheets :: White Papers

:: Data Sheets :: Product/Part Number Searches :: AMP NETCONNECT Product Sales Engineer Contacts

:: Authorized NETCONNECT Design and Installation (ND&I) Contractor Listings

:: Authorized AMP NETCONNECT Product Distributor Listings

OR CONTACT AMP NETCONNECT BUSINESS UNIT BY PHONE OR EMAIL

Customer Service Center (USA): 1-800-553-0938

:: Technical Support :: Product Information :: Obtain a Quote

:: Place an Order :: Product Samples :: Order Literature

:: Tyco Electronics Fax Service

AMP NETCONNECT Product Training Services: 1-800-331-9857 ext 63809

:: Installing and Connectorizing LAN Cabling :: Certifying and Troubleshooting LAN Cabling :: Designing LAN Cabling

To contact AMP NETCONNECT Business Unit via e-mail: [email protected]

GLOBALLY CONNECTED FOR ALL YOUR CABLING NEEDS

NEED MORE INFORMATION?

AmericasArgentina . . . . . . . . . . . . . . . . 54-11-4733-2200

Brazil . . . . . . . . . . . . 55-11-3611-1311 ext. 155

Canada . . . . . . . . . . . . . . . . . . . . . . 905-475-6222

Chile . . . . . . . . . . . . . . . . . . . . . . . . 56-2-209-8211

Colombia . . . . . . . . . . . . . . . . . . . . 57-1-2544444

Mexico. . . . . . . . . . . . . . . . . . . . . . 52-5-729-0400

Peru . . . . . . . . . . . . . . . . . . . . . . . . 51-1-442-4242

United States . . . . . . . . . . . . . . 1-800-553-0938

Venezuela . . . . . . . . . . . . . . . . . . . . See Colombia

Asia/PacificAustralia

Sydney . . . . . . . . . . . . . . . . . 61-2-9407-8300

Melbourne. . . . . . . . . . . . . . 61-3-9558-8066

China

Beijing . . . . . . . . . . . . . . . . 86-10-6581-6181

Chongqing. . . . . . . . . . . . . 86 23 62803380

Guangzhou. . . . . . . . . . . . 86 20 8669-3535

Hong Kong . . . . . . . . . . . . . . 852 2735 1628

Shanghai. . . . . . . . . . . . . . 86-21 5383 8188

Shenzhen . . . . . . . . . . . . 86 755 82322840

Xian . . . . . . . . . . . . . . . . . . . . 86 29 3218239

Indonesia . . . . . . . . . . . . . . . . . . . . 65 64164888

Japan

Kawasaki . . . . . . . . . . . . . . . 81-44-844-8022

Osaka . . . . . . . . . . . . . . . . . . 81-6-6251-7330

Korea. . . . . . . . . . . . . . . . . . . . . . 82 2 3274 0535

Malaysia. . . . . . . . . . . . . . . . . . . . . 603 705 3055

New Zealand

Auckland. . . . . . . . . . . . . . . . . 64-9-634-4580

Wellington. . . . . . . . . . . . . . . . 64-4-3841495

Philippines. . . . . . . . . . . . . . . . . . . 632 867 8641

Singapore. . . . . . . . . . . . . . . . . . . . 65 64164888

Taiwan. . . . . . . . . . . . . . . . . . . 886 2 2664 9977

Thailand . . . . . . . . . . . . . . . . . . . . 66 2 955 0500

Vietnam . . . . . . . . . . . . . . . . . . . . . 848 9305 546

Europe/Middle East/AfricaAustria . . . . . . . . . . . . . . . . . . . . . . . 43-1-90560-0

Belgium. . . . . . . . . . . . . . . . . . . . . 32-16-352-300

Czech Republic . . . . . . . . . . 420-5-41-162-112

Denmark . . . . . . . . . . . . . . . . . . . 45-70-15-52-00

Finland . . . . . . . . . . . . . . . . . . . . 358-9512-34-20

France. . . . . . . . . . . . . . . . . . . . . 33-1-3420-2122

Germany. . . . . . . . . . . . . . . . 49-6103-709-1547

Hungary . . . . . . . . . . . . . . . . . . . . 36-1-289-1007

India . . . . . . . . . . . . . . . . . . . . . . . 91-80-8412433

Italy . . . . . . . . . . . . . . . . . . . . . . 39-011-4012-111

Netherlands . . . . . . . . . . . . . . . 31-73-6246-211

Norway . . . . . . . . . . . . . . . . . . . . 47-66-77-88-99

Poland. . . . . . . . . . . . . . . . . . . . . 48-22-4576-700

Russia . . . . . . . . . . . . . . . . . . . . 7-095-926-55-06

Spain . . . . . . . . . . . . . . . . . . . . . . 34-93-291-0330

Sweden . . . . . . . . . . . . . . . . . . . 46-8-5072-5000

Switzerland. . . . . . . . . . . . . . . . 41-71-447-0447

Turkey . . . . . . . . . . . . . . . . . . . 90-212-281-8181

Ukraine . . . . . . . . . . . . . . . . . . 38-044-238-6908

United Kingdom . . . . . . . . . . 44-208-420-8140

For Eastern European Countries not shown call: 49-6103-709-1166.

For Middle East/African Countries not shown call: 33-1-3420-2122.


Cabling a company or building can get complex. Yet the solution for productive

connectivity and cable management can be as simple as talking to the

right people. The AMP NETCONNECT Group of Tyco Electronics.

The reason is what we bring to the building infrastructure challenges you face.

In-depth technical knowledge and expertise from decades of experience. Innovative

technologies from ongoing R&D. And quality products for every data, voice and video

networking need. The broadest line in the industry, in fact.

More than these, however, it’s what we do to answer the challenge: develop and deliv-

er integrated, made-to-order solutions that optimize network performance, increase produc-

tivity and produce more immediate return-on-investment.

And it’s not just providing technology. It’s making sure solutions are efficiently and effec-

tively installed: working with distributors so products are delivered when and where you

need them. And maintaining a global network of certified installation contractors.

It all means, simply, that AMP NETCONNECT cabling solutions provide the answers

you’re looking for: the whole solution for any cabling challenge. From the ground up.

PEOPLE & PRODUCTS TO ANSWER THE CABLING CHALLENGE.

::

3

NEW CABLING PRODUCTS

AMPTRAC Connectivity Management System:: Reduces downtime and response time

:: Integrates network and physical layer management

:: Helps increase productivity

:: See page195

EtherSeal Connectivity System:: Complete Cat 5e cabling solution for both harsh and office environments

:: Uses industrial grade materials

:: Uses the same high performance AMP NETCONNECT Category 6 and 5e components asstandard product lines

:: See page 223

MRJ 21 Connectivity System:: MRJ 21 provides an application independent copper platform for applications today and

into the future - including Gigabit, VoIP & powered Ethernet.

:: The small size of the MRJ 21 connector and cabling reduces cable bulk in pathways andspaces, enabling much higher port counts in a smaller space.

:: Factory termination and testing of the cassettes provides assurance of pluggable perform-ance on site. This enables rapid installation or MACs with pre-tested quality.

:: See page207

Innerduct:: The AMP NETCONNECT innerduct system from Tyco Electronics is a high quality cable pro-

tection product line for the premises cabling industry.

:: AMP NETCONNECT innerduct products are manufactured from the highest quality materials.

:: The plenum and riser product lines are both UL 2024 listed, are flexible and easy to install.

:: See page 25

New AMP NETCONNECT Home Net-Works Products:: Supports data rates up to1 gigabit per second (1000BASE-T)

:: Fully compliant with residential and commercial cabling and safety standards

:: A true structured cabling system offering maximum flexibility

:: See page 249

4


Power Distribution Systems:: Undercarpet products offer an easy and cost effective solution for both power and communica-

tion distribution

:: AMPINNERGY Modular Power Distribution System offers a modular approach for power distributionthat is both easy and fast to reconfigure and redeploy in both office and retail businesses

:: For more information request catalog number 1654963

:: See page 219

MT-RJ Connector System and MT-RJ SECURE Connetor System Upgrades:: No epoxy, no polish, no crimp terminations

:: Half the size of SC Duplex and ST-Style connectors

:: Jack version eliminates the need for a separate coupler

:: MT-RJ SECURE Connectors offer color coded keying for secured networks

:: See page 36

New SL Series Termination Tool:: Termination tool for SL Series jacks

:: Simplifies the termination process, especially forCategory 6 jacks

:: Terminates and cuts all 8 conductors at once

:: See page 241

5

Category 6-110 XC Cross-Connect System:: Features the same footprint and densities as standard 110Connect XC Cross-Connect System

products

:: Utilizes shielded crosstalk barrier technology for superior performance

:: Totally new design – High tech black color and silver plating helps to differentiate between stan-dard cross-connect and Category 6 products

:: See page 148

SL Series Upgrades:: LC Inserts, SVGA 110-Style termination module

:: Dual-Opening Double Gang Faceplate

:: 4-Port Decorator Mounting Strap

:: See page 37-45

New Fiber Optic and Copper Cabling:: Plenum (OFNP) rated Indoor/Outdoor Fiber Optic Cabling

:: 25-Pair Category 5e UTP

:: Category 6 and 5e FTP Twisted Pair Cables

:: See pages 9-24

New Fiber Optic Products for Telecommunications Room:: Splice and Patch Enclosures for mixed termination environments

:: Wall mount splice and patch enclosures

:: Fiber Optic Snap-in Adapter Plates and MPO Cassettes

:: See page 112-127

New Twisted Pair Patch Panels and Cable Management Options:: Category 6, Enhanced Category 5 and SL Series Multimedia Patch Panels

:: New load options for standard patch panels, and new Angled and Hinged Patch Panels

:: Vertical Cable Management Ring Panels, Split Loom and SPIRAP Spiral Plastic Tubing

:: See page 128-156


6

TABLE OF CONTENTS

7

1 CABLE 9-24

2 INNERDUCT 25-34

3 WORK AREA OUTLETS 35-98

4 OPEN OFFICE/ZONE CABLING 99- 110

5 TELECOMMUNICATIONS ROOM 111- 156

6 CABLE ASSEMBLIES 157- 168

7 CONNECTORS 169-184

8 FILTERS, BALUNS & ADAPTERS 185- 188

9 LABELING & IDENTIFICATION 189-194

10 AMPTRAC CONNECTIVITY MGMT. SYSTEM 195-206

11 MRJ21 CONNECTOR SYSTEM 207-208

12 LAN ELECTRONICS & WIRELESS 209-218

13 POWER DISTRIBUTION 219-222

14 ETHERSEAL CONNECTOR SYSTEM 223-228

15 TOOLS 229- 248

16 AMP NETCONNECT HOME NET-WORKS 249- 264

17 REFERENCE 265- 280

18 INDEX 281-302

Trademarks/Service Marks

AMP, AMP-BARREL, AMP NETCONNECT, AMP NETCONNECT HOME NET-WORKS, AMPINNERGY, AMPMODU,

AMPTRAC, AMP-TY, CHAMP, CHAMP-LOK, CORELINK, DUALAN, FLEX-MODE, FSD, HIDEAWAY, HIDEOUT,

LIGHTCRIMP, LIGHTCRIMP PLUS, MRJ21, MT-RJ SECURE, NETCONNECT, PRO-CRIMPER, PROTECT-N-DUCT,

RSD, T-HEAD and TYCO are trademarks.

Other Trademarks and Company Names

A-BUS is a trademark of Leisuretech Electronics Pty Ltd.

ACTION OFFICE, ETHOSPACE and HERMAN MILLER are trademarks of Herman Miller, Inc.

CISCO is a trademark of Cisco Systems, Inc.

EPO-TEK is a trademark of Epoxy Technology, Inc.

ETL SEMKO is a trademark of Intertek Testing Services Limited

HUBBELL and LO-CON are trademarks of Hubbell Incorporated

HYSOL is a trademark of Henkel Loctite Corporation

IBM is a trademark of International Business Machines Corporation

INIFINICOR and CORNING are trademarks of Corning Incorporated

ITRACS is a trademark of Itracs Corporation

KEVLAR and TEFLON are trademarks of E.I. DuPont DeNemours and Company

KEYSTONE is a trademark of Keystone Electronics Corp.

KNOLL is a trademark of Knoll, Inc.

KRONE is a trademark of Krone GmbH

MICROSOFT WORD, WINDOWS, WINDOWS NT and WINDOWS XP

are trademarks of Microsoft Corporation

MTP is a trademark of US Conec Ltd.

SEMTRON, INC. is a trademark of Semtron, Inc.

ST is a trademark of Lucent Technologies

STEEL CITY is a trademark of Thomas & Betts Corporation, Inc.

TRA-CON is a trademark of TRA-CON, Inc.

TEFLON is a trademark of the DuPont Corporation

VELCRO is a trademark of Velcro Industries B.V.

WALKERDUCT and WIREMOLD are trademarks of The Wiremold Company

Other products, logos and Company names mentioned herein may be trademarks of their respective owners.

PRODUCT TRADEMARKS

::

::

Products in this catalog have been primarily engineered for the U.S. market. Though the

majority will be suitable for use in Europe and Asia/Pacific, no claims are made that they

meet European-specific or Asia/Pacific requirements or directives. Please contact your

local AMP NETCONNECT Product Sales Representative for details regarding compliance

with any particular regulations or standards.

Specifications and product details subject to change without notice.

8

For More Information, Call 1-800-553-0938www.ampnetconnect.com

9

CABLE

Summary

:: Fiber Optic Cables

... Interconnect, distribution,

indoor/outdoor and outside plant

... Supports industry applications and

standards: ANSI, IEEE, ATM, Fibre

Channel, Bellcore/Telcordia,

TIA/EIA, ISO/IEC and ICEA

:: Twisted Pair Cables

... Meet or exceed all TIA/EIA and ISO

specifications

... Listed for safety (CMR/CMP)

... Category 3, Category 5, Category

5e, and Category 6 performance

... Variety of colors and packaging

available

CableFiber Optic Cable and Accessories....................................................10-20

General Information ...............................................................................10

Interconnect, 1-4 Fiber..........................................................................11

Distribution, 6-12 Fiber .........................................................................12

Distribution, 24-72 Fiber ......................................................................13

Indoor/Outdoor, 4-12 Fiber .................................................................14

Indoor/Outdoor, 24-144 Fiber............................................................15

Outside Plant Armored, 4-12 Fiber ....................................................16

Outside Plant Armored, 24-144 Fiber ..............................................17

Outside Plant Dielectric, 4-12 Fiber...................................................18

Outside Plant Dielectric, 24-144 Fiber .............................................19

Buffer Tube Splitter Kits ........................................................................20

Twisted Pair Cable .................................................................................21-24

Category 3 UTP .......................................................................................21

Category 5 UTP .......................................................................................21

Category 5e UTP (200 MHz) ...............................................................22

Category 5e FTP......................................................................................22

Category 5E UTP (350 MHz) ...............................................................23

Category 6 UTP .......................................................................................23

Category 6 FTP........................................................................................24

Category 6E UTP.....................................................................................24

1

Ch01-Cable_3-04.qxd 3/15/2004 2:15 PM

FIB

ER

OP

TIC

CA

BL

E


10

CABLE

Optical Fiber Cabling Architecture

Horizontal Cabling

Horizontal cabling runs from the telecommunicationsroom or patch panel to individual workstations or groupsof workstations.

Backbone CablingBackbone cabling connects a group oftelecommunications rooms and can be run vertically (floorto floor) or horizontally.

Campus CablingCampus cabling connects two or more buildings. Thecables can be installed in aerial, underground conduit, ordirect buried applications.

Product Facts

:: AMP NETCONNECT Fiber

Optic Cables are tested and

designed to the most recent

industry standards for

premise cabling, network

and telecommunications

applications, including:

... IEEE 802.3

- Ethernet

- Fast Ethernet

- Gigabit Ethernet

- 10 Gigabit Ethernet

... FDDI

... ATM

... Fibre Channel

... Token Ring

... TIA/EIA-568

... ISO 11801

... ICEA-596

... ICEA-640

... ICEA-696

AMP NETCONNECT Fiber Optic CablesAMP NETCONNECT multimode fiber cables contain the highest quality optical fiber, and offer the best performance for laser-based and LED-based

applications. The fiber has been engineered to support applications using the newest laser and VCSEL technologies (such as Gigabit Ethernet and Ten

Gigabit Ethernet), while providing advanced performance for legacy applications such as FDDI and Token Ring. The 62.5/125µm fiber is guaranteed for

transmission distances up to 300m in Gigabit Ethernet compliant systems at 850nm and up to 550m at 1300nm. The 50/125µm fiber is guaranteed for

transmission distances up to 600m in Gigabit Ethernet compliant systems at both 850 and 1300nm. Both of the fibers can support Ten Gigabit Ethernet

and can operate at significantly greater distances (2000m) at slower protocolssuchasFastEthernet.

The AMP NETCONNECT XG System is a high performance multimode fiber optic cabling system which has been designed to meet the

requirements of the 10 Gigabit Ethernet application while still supporting all legacy LED and VCSEL applications. The system fulfills the specifications

of IEEE 802.3ae for 10GBASE-SR (10 Gigabit Ethernet serial transmission on MMF at 850nm) and complies to the OM-3 fiber type and link class

definitions of the 2nd edition of ISO 11801. All system components have been designed and optimized to provide the best multimode system

performance possible in order to ensure compatibility for Gigabit and 10Gigabit network applications.

FiberGigabit Ethernet Gigabit Ethernet 10 Gigabit Ethernet Serial 10 Gigabit Ethernet

@ 850nm @ 1300nm @ 850nm WDM @ 1300nm

Multimode 62.5/125µm 300m 550m 33m 300m

Multimode 50/125µm 600m 600m 82m 300m

XG (850nm Laser-optimized 50/125µm) Multimode 600m 600m 300m 300m

Optical Fiber Cable SpecificationsXG (850nm Laser- Multimode 50/125 Multimode 62.5/125

Singlemode optimized 50/125µm) (50/125µm) (62.5/125µm)

(1300/1550nm) Multimode (850/1300nm ) (850/1300nm )

Indoor Cables

Maximum Attenuation (dB/km) 1.0/1.0 3.5/1.5 3.5/1.5 3.5/1.5

OFL Bandwidth (MHz km) -/- 1500/500 500/500 200/500

Laser Bandwidth (MHz km) -/- 2000/- -/- -/-

Indoor/Outdoor and OSP Loose Tube Cables

Maximum Attenuation (dB/km) 0.5/0.5 3.5/1.5 3.5/1.5 3.5/1.5

OFL Bandwidth (MHz km) -/- 1500/500 500/500 200/500

Laser Bandwidth (MHz km) -/- 2000/- -/- -/-

Optical Fiber Cable Temperature RangesRiser Plenum

Storage -40°C to +65°C (-40°F to +149°F) -40°C to +65°C (-40°F to +149°F)

Interconnect (Tight Buffered) Cables Operating -20°C to +50°C (-4°F to +122°F) -20°C to +50°C (-4°F to +122°F)

Installation -20°C to +50°C (-4°F to +122°F) -20°C to +50°C (-4°F to +122°F)

Storage -40°C to +65°C (-40°F to +149°F) -40°C to +65°C (-40°F to +149°F)

Indoor, Distribution (Tight Buffered) Cables Operating -20°C to +50°C (-4°F to +122°F) 0°C to +50°C (32°F to +122°F)

Installation -20°C to +50°C (-4°F to +122°F) 0°C to +50°C (32°F to +122°F)

Stranded Cables

Storage -40°C to +70°C (-40°F to +160°F)

Indoor/Outdoor Cables Operating -40°C to +70°C (-40°F to +160°F)

Installation -20°C to +60°C (-4°F to +140°F)

Stranded Cables

Storage -40°C to +70°C (-40°F to +160°F)

OSP (Loose Tube) Cables Operating -40°C to +70°C (-40°F to +160°F)

Installation -20°C to +60°C (-4°F to +140°F)

Ch01-Cable_3-04.qxd 3/15/2004 2:15 PM

FIB

ER

OP

TIC

CA

BL

E


11

CABLE

��

��

��

Product Facts

:: Suitable for pigtails, patch cords,

horizontal cabling and internal

equipment connections

:: Suitable for direct termination

with epoxy/polish type, LightCrimp,

LightCrimp Plus

and MT-RJ Connectors

:: High performance singlemode and

multimode fibers meet all industry

performance standards

:: Strippable 900µm tight buffer coating

allows for easy connectorization

:: Aramid yarn reinforcement

:: UL and cUL listed OFNR

(Riser)/OFNP(Plenum)

:: Designed and tested in accordance with

TIA/EIA-568-B, Telcordia GR-409-CORE,

IEC 793-1/794-1 and ISO/IEC 11801Zipcord Cable

Simplex Cable

Simplex (2.0mm)

Fiber Unit Count Fiber UL/NEC Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)

Count Units (Fibers/Unit) Type Ratings Number kg/km (lb/kft) mm (in) Installation Long Term Installation Long Term

SinglemodeRiser 0-1664006-6 5 (3)

Plenum 0-1664007-6 6 (4)

Multimode Riser 2-1664008-1 5 (3)

50/125µm Plenum 2-1664009-1 6 (4)1 1 (1)

XG Multimode Riser 8-1664008-1 5 (3)2.0 (0.08) 220 (50) 55 (12.5) 40 (1.6) 20 (0.8)

50/125µm Plenum 8-1664009-1 6 (4)


62.5/125µm Plenum 1-1664011-1 6 (4)

Simplex (2.9mm)


Plenum 0-1664001-6 9 (6)


50/125µm Plenum 2-1664003-1 9 (6)1 1 (1)

XG Multimode Riser 8-1664002-1 8 (5)2.9 (0.11) 220 (50) 55 (12.5) 58 (2.8) 29 (1.1)

50/125µm Plenum 8-1664003-1 9 (6)


62.5/125µm Plenum 1-1664005-1 9 (6)

Zipcord (2.0mm)


Plenum 0-1664019-6 8 (5)


50/125µm Plenum 2-1664021-1 8 (5)2 2 (1)

XG Multimode Riser 8-1664020-1 6 (4)2.0x4.0 220 (50) 55 (12.5) 40 (2.2) 20 (0.8)

50/125µm Plenum 8-1664021-1 8 (5)(0.08x0.16)


62.5/125µm Plenum 1-1664023-1 8 (5)

Zipcord (2.9mm)


Plenum 0-1664013-6 18 (12)


50/125µm Plenum 2-1664015-1 18 (12)2 2 (1)

XG Multimode Riser 8-1664014-1 15 (10)2.9x5.8 220 (50) 55 (12.5) 58 (2.2) 29 (1.1)

50/125µm Plenum 8-1664015-1 18 (12)(0.11x0.22)


62.5/125µm Plenum 1-1664017-1 18 (12)

2-Fiber


Plenum 0-1664025-6 23 (16)


50/125µm Plenum 2-1664027-1 23 (16)2 1 (2)

XG Multimode Riser 8-1664026-1 19 (13)

50/125µm Plenum 8-1664027-1 23 (16)4.8 220 (50) 55 (12.5) 95 (3.8) 48 (1.9)


62.5/125µm Plenum 1-1664029-1 23 (16)

4-Fiber

Singlemode Riser 0-1664030-6 21 (14)

Plenum 0-1664031-6 25 (17)


50/125µm Plenum 2-1664033-1 25 (17)4 1 (4)

XG Multimode Riser 8-1664032-1 21 (14)4.8 220 (50) 55 (12.5) 95 (3.8) 48 (1.9)

50/125µm Plenum 8-1664033-1 25 (17)


62.5/125µm Plenum 1-1664035-1 25 (17)

4-Fiber

��

��

��

��

��

��

��

��

2-Fiber

Interconnect, 1- 4 Fiber

Ch01-Cable_3-04.qxd 3/15/2004 2:15 PM

Fiber Unit Count Fiber UL/NEC Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)

Count Unit (Fibers/Unit) Type Ratings Number kg/km (lb/kft) mm (in) Installation Long Term Installation Long Term

SinglemodeRiser 0-1664036-6 22 (15) 667 (150) 167 (38)

Plenum 0-1664037-6 24 (16) 445 (100) 111 (25)

Multimode Riser 2-1664038-1 22 (15) 667 (150) 167 (38)

50/125µm Plenum 2-1664039-1 24 (16) 445 (100) 111 (25)6 1 (6)

XG Multimode Riser 8-1664038-1 22 (15)4.8 (0.19)

667 (150) 167 (38)96 (3.8) 48 (1.9)

50/125µm Plenum 8-1664039-1 24 (16) 445 (100) 111 (25)

Multimode Riser 1-1664040-1 22 (15) 667 (150) 167 (38)

62.5/125µm Plenum 1-1664041-1 24 (16) 445 (100) 111 (25)


Plenum 0-1664043-6 26 (18) 445 (100) 111 (25)

Multimode Riser 2-1664044-1 24 (16) 667 (150) 167 (38)

50/125µm Plenum 2-1664045-1 26 (18) 445 (100) 111 (25)8 1 (8)


667 (150) 167 (38)108 (4.2) 54 (2.1)

50/125µm Plenum 8-1664045-1 26 (18) 445 (100) 111 (25)

Multimode Riser 1-1664046-1 24 (16) 667 (150) 167 (38)

62.5/125µm Plenum 1-1664047-1 26 (18) 445 (100) 111 (25)


Plenum 0-1664049-6 46 (31) 445 (100) 111 (25)

Multimode Riser 2-1664050-1 36 (24) 667 (150) 167 (38)

50/125µm Plenum 2-1664051-1 46 (31) 445 (100) 111 (25)12 1 (12)


667 (150) 167 (38)124 (4.8) 62 (2.4)

50/125µm Plenum 8-1664051-1 46 (31) 445 (100) 111 (25)

Multimode Riser 1-1664052-1 36 (24) 667 (150) 167 (38)

62.5/125µm Plenum 1-1664053-1 46 (31) 445 (100) 111 (25)

Note: Other cable designs (including hybrid) available. Call for more information.

FIB

ER

OP

TIC

CA

BL

EF

IBE

R O

PT

IC C

AB

LE


12

CABLE

Distribution, 6 - 12 Fiber

��

��

��

��

Product Facts

:: Suitable for horizontal and intrabuilding

backbone cabling, and for direct

termination in multi-user outlets

:: Suitable for direct termination with

epoxy/polish-type, LightCrimp,

LightCrimp Plus and MT-RJ Connectors

:: High performance singlemode

and multimode fibers meet all

industry performance standards

:: Strippable 900µm tight

buffer coating allows for

easy connectorization

:: TIA color-coded fibers

for easy identification

:: Hybrid cables provide a

built-in upgrade for future applications

that will require singlemode fibers



:: Designed and tested in accordance

with TIA/EIA-568-B, Telcordia GR-409-

CORE, IEC 793-1/794-1, ICEA-596 and

ISO/IEC 11801

Distribution Fiber Optic Cables

Ch01-Cable_3-04.qxd 3/15/2004 2:15 PM


13

CABLE

Distribution, 24 -72 Fiber

��

��

��

��

� ��

�� !� ��

"�#��$��

Multi-Unit Distribution Fiber Optic Cables

Fiber Unit Count Fiber UL/NEC Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)Count Unit (Fibers/Unit) Type Ratings Number kg/km (lb/kft) mm (in) Installation Long Term Installation Long Term


Plenum 0-1664055-6 117 (79) 667 (150) 167 (38)

Multimode Riser 2-1664056-1 87 (59) 1335 (300) 334 (75)

50/125µm Plenum 2-1664057-1 117 (79) 667 (150) 167 (38)2 (12)

XG Multimode Riser 8-1664056-1 87 (59) 7.2 x 13.4 1335 (300) 334 (75)

50/125µm Plenum 8-1664057-1 117 (79) (0.28 x 0.53) 667 (15) 167 (38) 144 (5.6) 72 (2.8)

Multimode Riser 1-1664058-1 87 (59) 1335 (300) 334 (75)

62.5/125µm Plenum 1-1664059-1 117 (79) 667 (150) 167 (38)

1 SM (12)Hybrid Riser 4-1664084-1 87(59) 1335 (300) 334 (75)

1 MM (12)Singlemode-

24 62.5/125µmPlenum 4-1664085-1 117 (79) 667 (150) 167 (38)


Plenum 0-1664061-6 200 (140) 667 (150) 167 (38)

Multimode Riser 2-1664062-1 160 (109) 1335 (300) 334 (75)

50/125µm Plenum 2-1664063-1 200 (140) 667 (150) 167 (38)4 (6)

XG Multimode Riser 8-1664062-1 160 (109) 1335 (300) 334 (175)

50/125µm Plenum 8-1664063-1 200 (140) 13.2 (0.52) 667 (150) 167 (38) 201 (8.0) 134 (5.3)

Multimode Riser 1-1664064-1 160 (109) 1335 (300) 334 (75)

62.5/125µm Plenum 1-1664065-1 200 (140) 667 (150) 167 (38)

2 SM (6)Hybrid Riser 4-1664086-1 160 (109) 1335 (300) 334 (75)

2 MM (6)Singlemode-

62.5/125µmPlenum 4-1664087-1 200 (140) 667 (150) 167 (38)


Plenum 0-1664067-6 260 (180) 667 (150) 167 (38)

Multimode Riser 2-1664068-1 210 (140) 1335 (300) 334 (75)

50/125µm Plenum 2-1664069-1 260 (180) 667 (150) 167 (38)

XG Multimode Riser 8-1664068-1 210 (140) 1335 (300) 334 (75)36 6 (6)

50/125µm Plenum 8-1664069-1 260 (180) 16.4 (0.65) 667 (150) 167 (38) 348 (13.8) 174 (6.9)

Multimode Riser 1-1664070-1 210 (140) 1335 (300) 334 (75)

62.5/125µm Plenum 1-1664071-1 260 (180) 667 (150) 167 (38)

2 SM (6)Hybrid Riser 4-1664088-1 210 (140) 1335 (300) 334 (75)

4 MM (6)Singlemode-

62.5/125µmPlenum 4-1664089-1 260 (180) 667 (150) 167 (38)


Plenum 0-1664073-6 310 (210) 667 (150) 167 (38)

Multimode Riser 2-1664074-1 250 (170) 1335 (300) 334 (75)

50/125µm Plenum 2-1664075-1 310 (210)18.2 (0.72)

667 (150) 167 (38)360 (14.2) 180 (7.1)48 4 (12)

XG Multimode Riser 8-1664074-1 250 (170) 1335 (300) 334 (75)

50/125µm Plenum 8-1664075-1 310 (210) 667 (150) 167 (38)

Multimode Riser 1-1664076-1 250 (170) 1335 (300) 334 (75)

62.5/125µm Plenum 1-1664077-1 310 (210) 667 (150) 167 (38)


Plenum 0-1664079-6 460 (310) 667 (150) 167 (38)

Multimode Riser 2-1664080-1 380 (260) 1335 (300) 334 (75)

50/125µm Plenum 2-1664081-1 460 (310) 667 (150) 167 (38)6 (12)


1335 (300) 334 (75)432 (17.0) 216 (8.5)72

50/125µm Plenum 8-1664081-1 460 (310) 667 (150) 167 (38)

Multimode Riser 1-1664082-1 380 (260) 1335 (300) 334 (75)

62.5/125µm Plenum 1-1664083-1 460 (310) 667 (150) 167 (38)

2 SM (12)Hybrid Riser 4-1664090-1 380 (260) 1335 (300) 334 (75)

4 MM (12)Singlemode-

62.5/125µmPlenum 4-1664091-1 460 (310) 667 (150) 167 (38)


Product Facts

:: Suitable for horizontal and

intrabuilding backbone

cabling, and for direct

termination in multi-user

outlets

:: Suitable for direct

termination with

epoxy/polish-type,

LightCrimp, LightCrimp

Plus and MT-RJ connectors

:: High performance

singlemode and multimode

fibers meet all industry


:: Strippable 900µm tight

buffer coating allows for

easy connectorization

:: TIA color-coded fibers for

easy identification

:: Hybrid cables provide a built-

in upgrade for future

applications that will require

singlemode fibers



:: Designed and tested in

accordance with TIA/EIA-

568-B, Telcordia GR-409-

CORE, IEC 793-1/794-1,

ICEA-596 and ISO/IEC 11801

FIB

ER

OP

TIC

CA

BL

E

Ch01-Cable_3-04.qxd 3/15/2004 2:15 PM

FIB

ER

OP

TIC

CA

BL

E


14

CABLE

Product Facts

:: Suitable for:

... Intrabuilding links (ducted or

direct burial) in a campus

environment

... Aerial links (when used with a

messenger strand)

... General purpose, riser or

plenum indoor spaces

... Local loop and feeder

networks

... Outdoor areas with

intermittent flooding or

moisture

... Environments with severe

temperature fluctuations

... Drop or service cables

:: Designed to save space and

time

:: High performance singlemode

and multimode fibers meet all

industry performance standards

:: Bypass the need for a

transition point and splicing

when entering buildings and go

directly into the building riser

or plenum spaces

:: TIA color-coded fibers for easy

identification

:: Water-blocked buffer tube for

water penetration protection

:: Small diameter single tube

construction saves space

inside ducts

:: Flame retardant UV protected

jacket for harsh outdoor

environment

:: Hybrid cables provide a built-in

upgrade for future applications

that will require singlemode

fibers


(Riser)/OFNP (Plenum)


accordance with ICEA-696

(Standard for Indoor-Outdoor

Optical Fiber Cable)

:: Compatible with Splitter Kits

[see page 18]

Indoor/Outdoor Single Loose Tube

Cables

��

%��& #��

��

��

��

Indoor/Outdoor, 4-12 Fiber

Water-blocked buffer tube

Single Loose TubeFiber Unit Count Fiber UL/NEC Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)

Count Units (Fibers/Unit) Type Ratings Number kg/km (lb/kft) mm (in) Installation Long Term Installation Long Term

Singlemode Riser 0-1664092-5

4 1 (4)Multimode 50/125µm Riser 2-1664093-5

71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)XG Multimode 50/125µm Riser 8-1664093-5

Multimode 62.5/125µm Riser 1-1664094-5

SinglemodeRiser 0-1664095-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

Plenum 0-1664233-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)

Multimode 50/125µmRiser 2-1664096-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

Plenum 2-1664230-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)6 1 (6)

XG Multimode 50/125µmRiser 8-1664096-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

Plenum 8-1664230-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)

Multimode 62.5/125µmRiser 1-1664097-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

Plenum 1-1664234-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)


8 1 (8)Multimode 50/125µm Riser 2-1664099-5

71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)XG Multimode 50/125µm Riser 8-1664099-5


Singlemode Riser 0-1664101-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

Plenum 0-1664235-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 232 (9.2) 66 (2.6)


Plenum 2-1664231-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)

1 (12)XG Multimode 50/125µm

Riser 8-1664102-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

12 Plenum 8-1664231-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)


Plenum 1-1664236-5 48 (32) 6.6 (0.26) 1335 (300) 400 (90) 99 (3.9) 66 (2.6)

1 SM (6) HybridRiser 4-1664104-5 71 (48) 8.5 (0.34) 1800 (400) 890 (200) 179 (6.8) 85 (3.4)

1 MM (6) Singlemode - 62.5µm

Ch01-Cable_3-04.qxd 3/15/2004 2:15 PM

FIB

ER

OP

TIC

CA

BL

E

15

CABLE


Stranded Loose TubeFiber Unit Count Fiber UL/NEC Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)

Count Unit (Fibers/Unit) Type Ratings Number kg/km (lb/kft) mm (in) Installation Long Term Installation Long Term

SinglemodeRiser 0-1664105-5 144 (98) 12.3 (0.48) 2700 (600) 890 (200) 246 (9.7) 123 (4.8)

Plenum 0-1664232-5 113 (77) 11.6 (0.46) 2670 (600) 890 (200) 175 (6.9) 117 (4.6)


Plenum 2-1664232-5 113 (77) 11.6 (0.46) 2670 (600) 890 (200) 175 (6.9) 117 (4.6)

2 (12)XG Multimode 50/125µm

Riser 8-1664106-5 144 (98) 12.3 (0.48) 2700 (600) 890 (200) 246 (9.7) 123 (4.8)

24 Plenum 8-1664232-5 113 (77) 11.6 (0.46) 2670 (600) 890 (200) 175 (6.9) 117 (4.6)


Plenum 1-1664238-5 113 (77) 11.6 (0.46) 2670 (600) 890 (200) 175 (6.9) 117 (4.6)

1 SM (6) HybridRiser 4-1664123-5 144 (98) 12.3 (0.48) 2700 (600) 890 (200) 246 (9.7) 123 (4.8)1 MM (6) Singlemode - 62.5µm


Multimode 50/125µm Riser 2-1664109-5

36

3 (12)XG Multimode 50/125µm Riser 8-1664109-5

144 (98) 12.3 (0.48) 2700 (600) 890 (200) 246 (9.7) 123 (4.8)Multimode 62.5/125µm Riser 1-1664110-5

1 SM (12) Hybrid

2 MM (12) Singlemode-62.5/125µmRiser 4-1664124-5


48Multimode 50/125µm Riser 2-1664112-5

144 (98) 12.3 (0.48) 2700 (600) 890 (200) 246 (9.7) 123 (4.8)4 (12)XG Multimode 50/125µm Riser 8-1664112-5



Multimode 50/125µm Riser 2-1664115-5

72

6 (12)XG Multimode 50/125µm Riser 8-1664115-5

168 (110) 13.1 (0.51) 2700 (600) 890 (200) 261 (10.2) 131 (5.1)Multimode 62.5/125µm Riser 1-1664116-5

2 SM (12) Hybrid

4 MM (12) Singlemode-62.5/125µmRiser 4-1664125-5


Multimode 50/125µm Riser 2-1664118-5277 (190) 17.0 (0.67) 2700 (600) 890 (200) 304 (12.0) 152 (6.0)96 8 (12)

XG Multimode 50/125µm Riser 8-1664118-5



Multimode 50/125µm Riser 2-1664121-5305 (210) 18.8 (0.74) 2700 (600) 890 (200) 370 (14.6) 185 (7.3)144 12 (12)

XG Multimode 50/125µm Riser 8-1664121-5


Indoor/Outdoor Stranded Loose Tube

Fiber Optic Cables

Product Facts

:: Suitable for:

... Intrabuilding links (ducted or

direct burial) in a campus

environment

... Aerial links (when used with a

messenger strand)

... General purpose, riser or

plenum indoor spaces

... Local loop and feeder networks

... Outdoor areas with intermittent

flooding or moisture




:: Designed to save space and time

:: High performance singlemode and

multimode fibers meet all industry


:: TIA color-coded fibers in TIA color-

coded tubes for easy installation

:: Bypass the need for a transition

point and splicing when entering

buildings and go directly into the

building riser or plenum spaces

:: Water-blocked buffer tubes and

water swellable materials for

water penetration protection

:: Flame retardant UV protected


environment

:: Hybrid cables provide a built-in

upgrade for future applications

that will require singlemode fibers


(Riser)/OFNP (Plenum)


accordance with ICEA-696

(Standard for Indoor-Outdoor

Optical Fiber Cable)

:: Compatible with Splitter Kits [see

page 18]

:: Reverse oscillating lay tube

construction for ease of mid-span

entry

��

%��& #��

��

� ��'��

%��& #��

�� !� ��

��

Indoor/Outdoor, 24 -144 Fiber

Water-blocked buffer tube

Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

FIB

ER

OP

TIC

CA

BL

EF

IBE

R O

PT

IC C

AB

LE


16

CABLE

Outside Plant (OSP) Armored, 4-12 Fiber

��

��

��

��

��

� ��

OSP Armored Single Loose Tube

Fiber Optic Cable

Product Facts

:: Suitable for:

... Intrabuilding links (ducted

or direct burial) in a campus

environment

... Aerial links (when used

with a messenger strand)


networks



moisture




:: High performance






:: Dry water-blocking

technology



inside ducts

:: Polyethylene UV-protected


environment

:: Low friction jacket

for ease of pulling

through ducts

:: Armored construction

:: Designed and tested

in accordance with TIA/EIA-

568-B,

Telcordia GR-20-CORE,

IEC 793-1/794-1,

ICEA-640 and

ISO/IEC 11801


[see page 18]

Armored Single Loose Tube

Fiber Unit Count Fiber Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)

Count Units (Fibers/Unit) Type Number kg/km (lb/kft) mm (in) Installation Long Term Installation Long Term

Singlemode 0-1664160-5

4 1 (4)Multimode 50/125µm 2-1664161-5

XG Multimode 50/125µm 8-1664161-5

Multimode 62.5/125µm 1-1664162-5


6 1 (6)Multimode 50/125µm 2-1664164-5

XG Multimode 50/125µm 8-1664164-5

Multimode 62.5/125µm 1-1664165-5120 (78) 10.7 (0.42) 2700 (600) 890 (200) 214 (8.4) 107 (4.2)


8 1 (8)Multimode 50/125µm 2-1664167-5

XG Multimode 50/125µm 8-1664167-5

Multimode 62.5/125µm 1-1664168-5


12 1 (12)Multimode 50/125µm 2-1664170-5

XG Multimode 50/125µm 8-1664170-5

Multimode 62.5/125µm 1-1664171-5


Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

FIB

ER

OP

TIC

CA

BL

E

17

CABLE


Product Facts

:: Suitable for

... Intrabuilding links in a

campus environment

(ducted or direct burial)

... Aerial links (when used with

a messenger strand)


networks



moisture




:: High performance




:: TIA color-coded fibers and

buffer tubes for easy

identification


technology



environment

:: Low friction jacket for ease of

pulling through ducts

:: Armored construction

:: Reverse oscillating

lay tube construction

for ease of mid-span entry



568-B,

Telcordia GR-20-CORE, IEC

793-1/794-1,

ICEA-640 and

ISO/IEC 11801


[see page 18]

��

��

��

%��& #��

�� !� ��

��

!#��#�

Armored Stranded Loose TubeFiber Unit Count Fiber Part Weight Diameter Tensile Load N (lbf) Bending Radius mm (in)



24 2 (12)Multimode 50/125µm 2-1664173-5

170 (120) 13.4 (0.53) 2700 (600) 890 (200) 268 (10.6) 134 (5.3)XG Multimode 50/125µm 8-1664173-5

Multimode 62.5/125µm 1-1664174-5


36 3 (12)Multimode 50/125µm 2-1664176-5

160 (110) 13.4 (0.53) 2700 (600) 890 (200) 268 (10.6) 134 (5.3)XG Multimode 50/125µm 8-1664176-5

Multimode 62.5/125µm 1-1664177-5


48 4 (12)Multimode 50/125µm 2-1664179-5

160 (110) 13.4 (0.53) 2700 (600) 890 (200) 268 (10.6) 134 (5.3)XG Multimode 50/125µm 8-1664179-5

Multimode 62.5/125µm 1-1664180-5


72 6 (12)Multimode 50/125µm 2-1664182-5

200 (140) 14.2 (0.56) 2700 (600) 890 (200) 284 (11.2) 142 (5.6)XG Multimode 50/125µm 8-1664182-5

Multimode 62.5/125µm 1-1664183-5


96 6 (12)Multimode 50/125µm 2-1664185-5

230 (160) 16.0 (0.63) 2700 (600) 890 (200) 320 (12.6) 160 (6.3)XG Multimode 50/125µm 8-1664185-5

Multimode 62.5/125µm 1-1664186-5


144 12 (12)Multimode 50/125µm 2-1664188-5

350 (240) 20.0 (0.78) 2700 (600) 890 (200) 392 (15.4) 196 (7.7)XG Multimode 50/125µm 8-1664188-5

Multimode 62.5/125µm 1-1664189-5


Outside Plant (OSP) Armored, 24-144 Fiber

OSP Armored Stranded Loose Tube

Fiber Optic Cable

Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

FIB

ER

OP

TIC

CA

BL

EF

IBE

R O

PT

IC C

AB

LE


18

CABLE

Dielectric Single Loose Tube




4 1 (4)Multimode 50/125µm 2-1664212-5

XG Multimode 50/125µm 8-1664212-5

Multimode 62.5/125µm 1-1664213-5


6 1 (6)Multimode 50/125µm 2-1664215-5

XG Multimode 50/125µm 8-1664215-5

Multimode 62.5/125µm 1-1664216-532 (22) 6.0 (0.24) 1000 (220) 890 (200) 100 (3.9) 60 (2.4)


8 1 (8)Multimode 50/125µm 2-1664218-5

XG Multimode 50/125µm 8-1664218-5

Multimode 62.5/125µm 1-1664219-5


12 1 (12)Multimode 50/125µm 2-1664221-5

XG Multimode 50/125µm 8-1664221-5

Multimode 62.5/125µm 1-1664222-5


Outside Plant (OSP) Dielectric, 4-12 Fiber

OSP Dielectric Single Loose Tube

Fiber Optic Cable

Product Facts

:: Suitable for:

... Intrabuilding links (ducted

or direct burial) in a campus

environment

... Aerial links (when used

with a messenger strand)


networks



moisture




:: High performance







technology



inside ducts



environment


for ease of pulling

through ducts

:: All-dielectric construction



568-B,

Telcordia GR-20-CORE,

IEC 793-1/794-1,

ICEA-640 and

ISO/IEC 11801


[see page 18]

��

%��& #��

��

��

��

Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

FIB

ER

OP

TIC

CA

BL

E


19

CABLE

Outside Plant (OSP) Dielectric, 24-144 Fiber

Product Facts

:: Suitable for

... Intrabuilding links in a

campus environment

(ducted or direct burial)

... Aerial links (when used with

a messenger strand)


networks



moisture




:: High performance




:: TIA color-coded fibers and

buffer tubes for easy

identification


technology



environment


for ease of pulling

through ducts

:: All-dielectric construction

:: Hybrid cables provide a built-

in upgrade for future

applications that will require

singlemode fibers



568-B, Telcordia GR-20-

CORE, IEC 793-1/794-1,

ICEA-640 and

ISO/IEC 11801


[see page 20]OSP All-Dielectric Stranded Loose Tube

Fiber Optic Cable

��

%��& #��

��

%��& #��

�� !� ��

��

Dielectric Stranded Loose Tube




2 (12)Multimode 50/125µm 2-1664191-5

24XG Multimode 50/125µm 8-1664191-5

100 (68) 11.6 (0.46) 2700 (600) 890 (200) 232 (9.2) 116 (4.6)Multimode 62.5/125µm 1-1664192-5

1 SM (12) Hybrid

1 MM (12) Singlemode-62.5/125µm4-1664208-5


3 (12)Multimode 50/125µm 2-1664194-5

36XG Multimode 50/125µm 8-1664194-5

100(68) 11.6 (0.46) 2700 (600) 890 (200) 232 (9.2) 116 (4.6)Multimode 62.5/125µm 1-1664195-5

1 SM (12) Hybrid

2 MM (12) Singlemode-62.5/125µm4-1664209-5


48 4 (12)Multimode 50/125µm 2-1664197-5

100(68) 11.6 (0.46) 2700 (600) 890 (200) 232 (9.2) 116 (4.6)XG Multimode 50/125µm 8-1664197-5

Multimode 62.5/125µm 1-1664198-5


6 (12)Multimode 50/125µm 2-1664200-5

72XG Multimode 50/125µm 8-1664200-5

130 (88) 12.6 (0.50) 2700 (600) 890 (200) 252 (10.0) 126 (5.0)Multimode 62.5/125µm 1-1664201-5

2 SM (12) Hybrid

4 MM (12) Singlemode-62.5/125µm4-1664210-5


96 8 (12)Multimode 50/125µm 2-1664203-5

160 (110) 14.4 (0.57) 2700 (600) 890 (200) 288 (11.4) 144 (5.7)XG Multimode 50/125µm 8-1664203-5

Multimode 62.5/125µm 1-1664204-5


144 12 (12)Multimode 50/125µm 2-1664206-5

250 (170) 18.0 (0.7) 2700 (600) 890 (200) 360 (14.2) 180 (7.1)XG Multimode 50/125µm 8-1664206-5

Multimode 62.5/125µm 1-1664207-5


Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

Buffer Tube Splitter Kits

Description Part Number

Stranded Loose Tube6-Fiber 1435018-1

12-Fiber 1435019-1

Single Loose Tube6-Fiber 1435020-1

12-Fiber 1435021-1

Product Facts

:: Designed for use with

AMP NETCONNECT

Indoor/Outdoor and Outside Plant

Fiber Optic Cables

:: OnedesignforSingleLooseTube

Cables and another for Stranded

LooseTube Cables

FIB

ER

OP

TIC

CA

BL

E


20

CABLE

Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

TW

IST

ED

PA

IR C

AB

LE


21

CABLE

Twisted Pair CablesPackage types in charts.

WR = Wooden Reels RB = Reel-in-a-Box PB = Pull Box

Length of cables is 1000 feet (305 meters), unless otherwise specified, for products on pages 15-18

Note: Other lengths and colors available. Call for details.

Product Facts

:: Meets or exceeds all

TIA/EIA-568-B and ISO 11801

Category 5 requirements

:: UL & cUL listed (CMR/CMP)

:: Independently verified by

ETL SEMKO

:: Lead-free jacketing

Solid Conductor

UL/NEC PairPackage

Part Number Weight Vp Dimensions (in)

Ratings Count White Gray Blue Yellow lb/kft (%nom) Dielectric Outside

CMR 25 WR 57814-1 57814-2 57814-3 57814-4 124 69 0.039 0.48

CMP 25 WR 57815-1 57815-2 57815-3 57815-4 124 72 0.037 0.41

Category 5 UTP Cable

Product Facts

:: Meets TIA/EIA-568-B and ISO

11801 Category 3 requirements



ETL SEMKO

:: Suitable for IEEE 802.3 10BASE-T

Solid Conductor

UL/NEC PairPackage


Ratings Count White Gray Blue Yellow lbs/kft (%nom) Dielectric Outside

4WR 57240-1 57240-5 57240-3 57240-7

17 0.15CMR PB 57240-2 57240-6 57240-4 - 64 0.033

25 WR 57242-5 57242-1 57242-3 57242-7 97 0.32

4WR 57241-1 57241-5 57241-3 57241-7

16 0.16CMP PB 57241-2 57241-6 57241-4 - 65 0.034

25 WR 57243-1 57243-5 57243-3 57243-7 117 0.32


Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

TW

IST

ED

PA

IR C

AB

LE


22

CABLE

Solid Conductor

UL/NEC PairPackage



RB 219538-2 219538-4 219538-6 219538-8

CMR4 WR 219538-1 219538-3 219538-5 219538-7 24 70 0.037 0.20

PB 6-219538-2 6-219538-4 6-219538-6 6-219538-8

25 WR 1499418-1 1499418-2 1499418-3 1499418-4 134 69 0.032 0.50

RB 219513-2 219513-4 219513-6 219513-8

CMP4 WR 219513-1 219513-3 219513-5 219513-7 22 74 0.035 0.19

PB 6-219513-2 6-219513-4 6-219513-6 6-219513-8

25 WR 1499419-1 1499419-2 1499419-3 1499419-4 142 72 0 .037 0.46

Product Facts

:: 4-Pair Cable:

... Exceeds TIA/EIA and ISO Category

5e (Enhanced Category 5)

specifications

... Independently verified by

ETL SEMKO

... Performance characterized to 200

MHz

... 2 dB NEXT performance above

Category 5e

... UL & cUL listed (CMR/CMP)

... Exceeds all requirements for Gigabit

Ethernet

... Lead-free jacketing

:: 25-Pair Cable:

... Exceeds TIA/EIA and ISO Category


specifications

... Independently verified by

ETL SEMKO

... UL & cUL listed (CMR/CMP)

Category 5e UTP Cable (200 MHz)

Category 5e FTP Cable

Solid Conductor

UL/NEC PairPackage


Ratings Count White Gray Blue Violet lbs/kft (%nom) Dielectric Outside

CMR 4 WR - 1499171-3 1499171-5 1-1499171-7 31 72 0.041 0.219

CMP 4 WR 1499172-1 1499172-3 1499172-5 - 29 72 0.042 0.240

Product Facts

:: Exceeds TIA/EIA and ISO Category 5e

(Enhanced Category 5) specifications

:: Independently verified by ETL SEMKO


:: Exceeds all requirements for Gigabit

Ethernet

Ch01-Cable_3-04.qxd 3/17/2004 1:11 PM

TW

IST

ED

PA

IR C

AB

LE


23

CABLE

Solid Conductor

UL/NEC PairPackage

Part Number Weight Vp Dimension

Ratings Count White Gray Blue Yellow lb/kft (%nom) Dielectric Outside

RB 57826-2 57826-4 57826-6 57826-8

CMR 4 WR 57826-1 57826-3 57826-5 57826-7 24 70 0.037 0.20

PB 6-57826-2 6-57826-4 6-57826-6 6-57826-8

RB 57825-2 57825-4 57825-6 57825-8

CMP 4 WR 57825-1 57825-3 57825-5 57825-7 22 74 0.035 0.19

PB 6-57825-2 6-57825-4 6-57825-6 6-57825-8

Product Facts

:: Exceeds TIA/EIA and ISO Category


specifications

:: Independently verified by ETL

SEMKO

:: Performance characterized

to 350 MHz

:: 5 dB NEXT performance above

Category 5e


:: Gigabit Ethernet zero bit error rate

independently certified

by ETL SEMKO


Category 5E UTP Cable (350 MHz)

Solid Conductor

UL/NEC PairPackage



CMR 4RB 219560-2 219560-4 219560-6 219560-8

26 70 0.042 0.230WR 219560-1 219560-3 219560-5 219560-7

CMP 4RB 219567-2 219567-4 219567-6 219567-8

24 74 0.040 0.206WR 219567-1 219567-3 219567-5 219567-7

Product Facts

:: Exceeds TIA/EIA and ISO Category

6 specifications


to 600 MHz


Category 6


ETL SEMKO


Ethernet



Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

TW

IST

ED

PA

IR C

AB

LE


24

CABLE

Solid Conductor

UL/NEC PairPackage



CMR 4RB 1499038-2 1499038-4 1499038-6 1499038-8

34 70 0.042 0.260WR 1499038-1 1499038-3 1499038-5 1499038-7

CMP 4RB 1499033-2 1499033-4 1499033-6 1499033-8

35 74 0.040 0.260WR 1499033-1 1499033-3 1499033-5 1499033-7

Product Facts

:: Exceeds TIA/EIA and ISO Category 6

specifications


to 600 MHz


Category 6

:: ETL SEMKO listed (CMR/CMP)


ETL SEMKO


Ethernet


Category 6E UTP Cable

Product Facts

:: Exceeds TIA/EIA and ISO Category 6

specifications

:: ETL SEMKO listed (CMR/CMP)

:: Independently verified by ETL SEMKO


Ethernet

Category 6 FTP Cable

Solid Conductor

UL/NEC PairPackage Color

Part Number

Ratings Count 305m (1000ft) 500m (1640ft) 1000m (3280ft)

CMR 4 WR White 1499389-1 1499389-2 1499389-3

White 1499416-1 - -

CMP 4 WRGray 1499416-3 - -

Blue 1499416-5 - -

Yellow 1499416-7 - -

Ch01-Cable_3-04.qxd 3/15/2004 2:16 PM

INN

ER

DU

CT


25

INNERDUCT

Summary

:: The AMP NETCONNECT

innerduct system from Tyco

Electronics is a high quality

cable protection product line for

the premises cabling industry.

:: Manufactured from the highest

quality materials

:: Corrugated HDPE outside plant

products offer high tensile

strength while being virtually

impervious to abrasion, scouring

and root penetration which

provides an extended lifespan

to cabling in harsh

environments

InnerductIntroduction............................................................................................................25

Product Descriptions ...........................................................................................26

Plenum ....................................................................................................................27

Riser ........................................................................................................................28

HDPE Dual-Wal .....................................................................................................29

HDPE Single-Wall .................................................................................................30

Fittings & Accessories.........................................................................................31

HDPE Solid Wall....................................................................................................32

Accessories ............................................................................................................33

2

Ch02-Innerduct_3-04.qxd 3/15/2004 2:17 PM

INN

ER

DU

CT


26

INNERDUCT

Product Facts

:: High tensile strength

:: Lower maintenance costs over an

extended lifespan in harsh environments

:: Lightweight -... Easier handling... Less wear and tear on installation

equipment... Eliminates reel breakage

:: Ease of Installation -... Installation requires no special tools or

equipment... Can be easily cut to the required length

and connected using various fittings

and attachments... Comes with a standard pull wire or

rope as follows:... 240 lb traceable wire (Dual Wall OSP

¼" - 3")

• Optional 240 lb pull rope (Plenum and

Riser½" and ¾")

• 900 lb pull tape (Plenum and Riser

1" - 2")

• Plenum, Riser, HDPE Dual-Wall, and

HDPE Single-Wall are all available in

“Split-Wall” for retrofit applications

:: Reduced Friction -... Cuts down on installation time and

avoids unwanted wear and tear on

cable

:: Cost Savings -... Provide superior protection for years to

come... Helps avoid costly maintenance and

repair expenses

Innerduct

The AMP NETCONNECT innerduct system from Tyco Electronics is a

high quality cable protection product line for the premises cabling

industry. AMP NETCONNECT innerduct products are manufactured

from the highest quality materials - PVDF for plenum applications,

PVC for riser applications and HDPE for outside plant applications.

The plenum and riser product lines are both UL 2024 listed, are

flexible and easy to install. The corrugated HDPE outside plant

products offer high tensile strength while being virtually impervious

to abrasion, scouring and root penetration which provides an

extended lifespan to cabling in harsh environments. In addition, it is

approximately half the weight of conventional HDPE solid wall pipe

which allows for easier handling, less wear and tear on expensive

installation equipment, and helps to eliminate broken reels. Our

smoothwall outside plant products are designed to provide leak

resistant installation with a watertight joint for exposed or direct

buried applications. AMP NETCONNECT innerduct products require

no special tooling or equipment and can be easily cut to the required

length and connected using various fittings and attachments.


INN

ER

DU

CT


27

INNERDUCT

PlenumSize Nominal Nominal Weight Min. Bend Coil Length Reel Length Reel Dimensions Part Number

(in.) I.D. O.D. (lbs./ft.) Radius (in.) ft(m) ft(m) in(mm) Orange White

½ 0.58 0.83 0.07 2.00 (50.80) 370 (112.77) 1200 (365.76)30 (9.14) H x

1435737-1 1-1435737-129 (8.83) W

¾ 0.83 1.04 0.08 2.00 (50.80) 250 (76.20) 1000 (304.80)30 (9.14) H x

1435737-2 1-1435737-229 (8.83) W

41 (12.49) H x

1 1.05 1.31 0.10 3.00 (76.20)250 (76.20) 1000 (304.80)

29 (8.83) W1435737-3 1-1435737-3

5000 (1524.00)60 (18.28) H x

48 (14.63) W

200 (60.96) 1000 (304.80)49 (14.93) H x

1¼ 1.38 1.65 0.16 3.00 (76.20)36 (10.97)

1435737-4 1-1435737-460 (18.28) H x

3200 (957.36)48 (14.63) W

1½ 1.55 1.88 0.20 4.00 (101.60)150 (45.72)

1000 (304.80)48 (14.63) H x

1435737-5 1-1435737-5350 (106.68) 36 (10.97) W

500 (152.40) 48 (14.63) H x

2 2.04 2.35 0.23 4.00 (101.60) 100 (30.48)32 (9.75) W

1435737-6 1-1435737-6700 (213.36) 48 (14.63) H x

36 (10.97) W

AccessoriesDescription Connection Couples Part

Method Figure Color Size (in) To (in) Number

½ ½ 1435755-1

¾ ¾ 1435755-2

Innerduct Coupling Snap Lock A White1 1 1435755-3

1¼ 1¼ 1435755-4

1½ 1½ 1435755-5

2 2 1435755-6

½ ½ 1435757-1

Snap Lock B White¾ ¾ 1435757-2

1 1 1435757-3

½ ½ 1435756-1

Innerduct Coupling Adapter ¾ ¾ 1435756-2

Threaded C 1 1 1435756-3

to 1¼ 1¼ 1435756-4

Snap Lock 1½ 1½ 1435756-5

2 2 1435756-6

Product Facts

:: Non-metallic corrugated flexibleinnerduct for use primarily in plenumapplications

:: Available in ½",¾", 1", 1¼", 1½", and2" sizes

:: Reels are sequentially marked and areavailable in various sizes

:: Available with an optional pre-fitted240 lb pull rope (for ½" and ¾") orstandard 900 lb pull tape (for 1" to 2")

:: Manufactured from PVDF resin

:: UL 2024 Rated

:: National Electric Code (NEC) Articles770 compliant

:: Maximum Flame Propagation: 1.50 ft

Plenum Innerduct and Accessories

:: Peak Optical Smoke Density: 0.03

:: Average Smoke Density: 0.01

:: Storage: -4°F - 158°F (-20°C -70°C)

:: Handling: -4°F - 104°F (-20°C -40°C)

C

A

B


INN

ER

DU

CT


28

INNERDUCT

PRODUCT FACTS

:: Non-metallic corrugated flexible

innerduct for use in riser and general

purpose applications

:: Suitable for use in vertical runs in a

shaft or between floors

:: Available in ½",¾", 1", 1¼", 1½", and 2"

sizes

:: Reels are sequentially marked and are

available in various sizes

:: Available with an optional pre-fitted 240

lb pull rope (for ½" and ¾") or standard

900 lb pull tape (for 1" - 2")

:: Manufactured from PVC

:: UL 2024 Rated

:: National Electric Code (NEC) Articles

770 and 330-22 compliant

:: Maximum Flame Propagation: 6.00 ft

:: Storage: -4°F - 158°F (-20°C - 70°C)

:: Handling: -4°F - 104°F (-20°C - 40°C)

Riser Innerduct and Accessories

RiserSize Nominal Nominal Weight Min. Bend Coil Length Reel Length Reel Dimensions Part Number

(in.) I.D. O.D. (lbs./ft.) Radius (in.) ft(m) ft(m) in(mm)

½ 0.58 (14.73) 0.84 (21.33) 0.10 5.00 (127.00) 370 (112.77) 1200 (365.76)30 (9.14) H x

1435736-129 (8.83) W

¾ 0.83 (21.08) 1.05 (26.67) 0.12 6.00 (152.40) 250 (76.20) 1000 (304.80)30 (9.14) H x

1435736-229 (8.83) W

250 (76.20) 1000 (304.80)41 (12.49) H x

1" 1.03 (26.16) 1.32 (33.52) 0.17 6.00 (152.40)29 (8.83) W

1435736-35000 (1524.00) 60 (18.28) H x

48 (14.63)

200 (60.96) 1000 (304.80)48 (14.63) H

1¼ 1.38 (35.05) 1.66 (42.16) 0.20 7.00 (177.80)x36 (10.97)

1435736-4

3200 (975.36)60 (18.28) H x

48 (14.63)

1½ 1.57 (39.87) 1.90 (48.26) 0.24 8.00 (203.20)150 (45.72)

1200 (365.76)48 (14.63) H

1435736-5350 (106.68) x36 (10.97)

500 (152.40)48 (14.63) H x

2" 2.02 (51.30) 2.38 (60.45) 0.26 9.00 (228.60) 100 (30.48)32 (9.75) W

1435736-6

700 (213.36)48 (14.63) H x

36 (10.97)


INN

ER

DU

CT


29

INNERDUCT

Riser AccessoriesDescription Connection Couples Part

Method Figure Color Size (in) To (in) Number

½ ½ 1435752-1

¾ ¾ 1435752-2

1 1 1435752-3Snap-Lock A Blue

1¼ 1¼ 1435752-4

1½ 1½ 1435752-5

Innerduct Coupling2 2 1435752-6

½ ½ 1435749-1

¾ ¾ 1435749-2

Solvent Weld B Blue1 1 1435749-3

1¼ 1¼ 1435749-4

1½ 1½ 1435749-5

2 2 1435749-6

½ ½ 1435754-1

Snap-Lock C Blue ¾ ¾ 1435754-2

1 1 1435754-3

½ ½ 1435753-1

¾ ¾ 1435753-2

Threaded MaleD Blue

1 1 1435753-3

to Snap-Lock 1¼ 1¼ 1435753-4

1½ 1½ 1435753-5

2 2 1435753-6

½ ½ 1435750-1

Innerduct Coupling Adapter ¾ ¾ 1435750-2

Threaded MaleE Blue

1 1 1435750-3

to Solvent Weld 1¼ 1¼ 1435750-4

1½ 1½ 1435750-5

2 2 1435750-6

½ ½ 1435751-1

¾ ¾ 1435751-2

Threaded FemaleF Blue

1 1 1435751-3

to Solvent Weld 1¼ 1¼ 1435751-4

1½ 1½ 1435751-5

2 2 1435751-6

Note: for a complete line of PVC cements and accessories contact Tyco Electronics at 800553-0938.

A

FD

B

E

C

PRODUCT FACTS

:: Full line of riser rated innerductfittings... Snap-lock adapters for coupling

innerduct together or to equipmentwithout using solvents oradhesives

... Threaded snap-lock adapters forsecure mounting to boxes or otherequipment

... Solvent weld adapters forpermanent, robust connections

:: Available in many sizes and differentcolors


INN

ER

DU

CT


30

INNERDUCT

PRODUCT FACTS

:: Non-metallic corrugated, light weight,flexible innerduct

:: Superior crush resistance, stiffness andimpact strength

:: Suitable for use in direct burialapplications

:: Available in ½",¾", 1", 1¼", 1½", and2" sizes

:: Listed part numbers are orange. Othercolors are available upon request (stockcolors: orange, red, green, white, black,blue, grey and yellow)


HDPE Single-Wall

:: Come pre-fitted with 900 lb pulltape and are available

:: Available with split for an additionalcharge per 1000 ft

:: Manufactured from grade 1, highdensity polyethylene resin

:: ASTM Standard D1248, type III,grade P34, category 4, Class C rated

:: UV resistant with 3-yearstabilization

Single Wall HDPE and AccessoriesSize Nominal Mean Wall Weight Min. Bend Tensile Pipe Impact Package Package

(in.) O.D. Thickness (lbs./ft.) Radius (in.) Strength Stiffness Strength Type Length Part

in(mm) in(mm) in(mm) psi (kPa) psi (kPa) ft-lbs(j)@-5C ft(m) Number

½0.26 0.13 2.00 350 70 11.06 CO 370 (112.77) 1435738-1

(14.47) (6.60) (50.80) (2413.16) (482.63) (14.99) WR 1500 (457.20)

¾0.27 0.17 2.00 350 70 11.06 CO 240 (73.15) 1435738-2

(19.55) (6.85) (50.80) (2413.16) (482.63) (14.99) WR 1000 (304.80)

11.00 0.31 0.25 3.00 350 70 11.06 CO 160 (48.76) 1435738-3

(25.40) (7.87) (76.20) (2413.16) (482.63) (14.99) WR 7500 (2286.00)

CO 250 (76.20)

1¼ 1.59 0.32 0.11 9.00 350 45 11.06WR 1000 (304.80) 1435738-4

(40.38) (8.12) (228.60) (2413.16) (310.26) (14.99)84S 6700 (2042.16)

102S 10000 (3048.00)

120S 15000 (4572.00)

CO 250 (76.20)

1½2.00 0.42 0.16 10.00 350 46 11.06

WR 900 (274.32) 1435738-5

(50.80) (10.66) (254.00) (2413.16) (317.15) (14.99)84S 4100 (1249.68)

102S 6200 (1889.76)

120S 10000 (3048.00)

CO 200 (60.96)

22.52 0.48 0.23 14.00 450 47 14.75

WR 500 (152.4) 1435738-6

(64.00) (12.19) (355.60) (3102.64) (324.05) (19.99)84S 2500 (762.00)

102S 3500 (1066.80)

120S 5000 (1524.00)

CO 100 (30.48)

33.60 0.58 0.41 20.00 400 48 14.75 84S 1000 (304.80) 1435738-7

(91.44) (14.73) (508.00) (2757.90) (330.94) (19.99) 102S 1400 (426.72)

120S 2000 (609.60)

Package Type: CO = Stand Alone Coil, WR = Wooden Reel, 84S = 84" Steel Reel, 102S = 102" Steel Reel, 120S = 120" Steel Reel


INN

ER

DU

CT


31

INNERDUCT

PRODUCT FACTS

:: Non-metallic corrugated flexibleinnerduct with interior longitudinal ribsfor reduced friction

:: Impact, crush and stiffness of solid wallinnerduct but half the weight

:: Suitable for use in plowed, tunneled oropen trench applications

:: Available in 1¼", 1½", 2" and 3" sizes

:: Listed part numbers have orangeexterior with black interior. Other colorsare available upon request (stock colors:orange, red, green, white, black, blue,grey and yellow)


HDPE Dual-Wall

:: Come pre-fitted with 900 lb pulltape and are available with a pre-fitted 240 lb pull rope

:: Available with a split for anadditional charge per 1000 ft

:: Manufactured from grade 1, highdensity polyethylene resin

:: EN50086-2-4 Rated

:: UV resistant with 3-yearstabilization

Dual Wall HDPESize Nominal Nominal Mean Wall Weight Min. Bend Tensile Pipe Impact Package Package

(in.) I.D. O.D. Thickness (lbs./ft.) Radius (in.) Strength Stiffness Strength Type Length Part

in(mm) in(mm) in(mm) in(mm) psi (kPa) psi (kPa) ft-lbs(j)@-5C ft(m) Number

CO 250 (76.20)

WR 1000 (304.80)

1¼1.26 1.59 0.32 0.20 18.00 490 90 11.06

84S 6700 (2042.16) 1435739-1(32.00) (40.38) (8.12) (457.20) (3378.43) (620.52) (14.99)

102S 10000 (3048.00)

120S 15000 (4572.00)

CO 250 (76.20)

WR 900 (274.32)

1½1.57 2.00 0.42 0.24 20.00 640 91 11.06

84S 4100 (1249.68) 1435739-2(39.87) (50.80) (10.66) (508.00) (4412.64) (627.42) (14.99)

102S 6200 (1889.76)

120S 10000 (3048.00)

CO 200 (60.96)

WR 500 (152.4)

22.03 2.52 0.48 0.26 28.00 920 92 14.75

84S 2500 (762.00) 1435739-3(51.56) (64.00) (12.19) (711.20) (6343.17) (634.31) (19.99)

102S 3500 (1066.80)

120S 5000 (1524.00)

CO 100 (30.48)

33.00 3.60 0.59 0.45 42.00 844 93 14.75 84S 1000 (304.80)

(76.20) (91.44) (14.98) (1066.80) (5819.17) (641.21) (19.99) 102S 1400 (426.72) 1435739-4

120S 2000 (609.60)

Package Type: CO = Stand Alone Coil, WR = Wooden Reel, 84S = 84" Steel Reel, 102S = 102" Steel Reel, 120S = 120" Steel Reel


INN

ER

DU

CT


32

INNERDUCT

PRODUCT FACTS

:: Non-metallic rigid, smooth-wallinnerduct for superior protection

:: Available in various sizes by type

:: Listed part numbers are orange.Other colors are available uponrequest (stock colors: orange, red,green, white, black, blue, grey andyellow)

:: Come pre-fitted with 900 ft-lb pulltape

:: ½" and ¾" sizes are available witha pre-installed 240 ft-lb pull rope

:: Available with a 1250 lb pull ropefor an additional charge per 1000 ft

HDPE Solid Wall

HDPE Solid WallSize Nominal I.D. Average O.D. Minimum Wall Weight Part

Description (in.) in(mm) in.(mm) in.(mm) (lbs./ft.) Number

½ ½ 0.840 (21.336) 0.076 (1.930) 0.084 1435740-1

¾ ¾ 1.050 (26.670) 0.095 (2.413) 0.130 1435740-2

1 1 1.315 (33.401) 0.120 (3.048) 0.200 1435740-3

1¼ 1¼ 1.660 (42.164) 0.151 (3.835) 0.320 1435740-4

SDR 11 1½ 1½ 1.900 (48.260) 0.173 (4.394) 0.410 1435740-5

2 2 2.373 (60.274) 0.216 (5.486) 0.640 1435740-6

3 3 3.500 (88.900) 0.318 (8.077) 1.380 1435740-7

4 4 4.500 (114.300) 0.404 (10.262) 2.900 1435740-8

6 6 6.625 (168.275) 0.602 (15.291) 4.960 1435740-9

½ ½ 0.840 (21.336) 0.062 (1.575) 0.072 1435741-1

¾ ¾ 1.050 (26.670) 0.078 (1.981) 0.110 1435741-2

1 1 1.315 (33.401) 0.097 (2.464) 0.168 1435741-3

SDR 13.51¼ 1¼ 1.660 (42.164) 0.123 (3.124) 0.260 1435741-4

1½ 1½ 1.900 (48.260) 0.141 (3.581) 0.340 1435741-5

2 2 2.373 (60.274) 0.176 (4.470) 0.530 1435741-6

3 3 3.500 (88.900) 0.259 (6.579) 1.150 1435741-7

4 4 4.500 (114.300) 0.333 (8.458) 1.900 1435741-8

SDR 15.51¼ 1¼ 1.660 (42.164) 0.107 (2.718) 0.230 1435742-1

4 4 4.500 (114.300) 0.290 (7.366) 1.670 1435742-8

½ ½ 0.840 (21.336) 0.109 (2.769) 0.112 1435743-1

¾ ¾ 1.050 (26.670) 0.113 (2.870) 0.148 1435743-2

1 1 1.315 (33.401) 0.133 (3.378) 0.218 1435743-3

Schedule 40 1¼ 1¼ 1.660 (42.164) 0.140 (3.556) 0.295 1435743-4

1½ 1½ 1.900 (48.260) 0.145 (3.683) 0.352 1435743-5

2 2 2.373 (60.274) 0.154 (3.912) 0.472 1435743-6

3 3 3.500 (88.900) 0.216 (5.486) 0.744 1435743-7

4 4 4.500 (114.300) 0.237 (6.020) 0.974 1435743-8

½ ½ 0.840 (21.336) 0.146 (3.708) 0.137 1435744-1

¾ ¾ 1.050 (26.670) 0.154 (3.912) 0.187 1435744-2

1 1 1.315 (33.401) 0.179 (4.547) 0.276 1435744-3

Schedule 80 1¼ 1¼ 1.660 (42.164) 0.191 (4.851) 0.379 1435744-4

1½ 1½ 1.900 (48.260) 0.200 (5.08) 0.461 1435744-5

2 2 2.373 (60.274) 0.218 (5.537) 0.637 1435744-6

3 3 3.500 (88.900) 0.300 (7.620) 1.300 1435744-7

4 4 4.500 (114.300) 0.337 (9.576) 1.905 1435744-8


INN

ER

DU

CT


33

INNERDUCT

HDPE Accessories

Accessories

Description Connection Couples Part

MethodFigure Color Size (in)

To (in) Number

1¼ 1¼ 1435759-4

Heavy Duty Screw Lock A White

1½ 1½ 1435759-5

Water-Tight 2 2 1435759-6

3 3 1435759-7

½ ½ 1435758-1

Innerduct Coupling ¾ ¾ 1435758-2

Standard1 1 1435758-3

Duty Water-Tight Snap-Lock - Grey 1¼ 1¼ 1435758-4

1½ 1½ 1435758-5

2 2 1435758-6

3 3 1435758-7

Heavy Duty1¼ 1¼ 1435760-1

Innerduct Coupling Adapter Compression

- White 1½ 1½ 1435760-2Water-Tight Fitting

2 2 1435760-3

¾ ¾ 1435736-1

1 1 1435736-2

1¼ 1¼ 1435736-3

End Plugs With Pull Rope/ - - 1½ 1½ 1435736-4

Wire Tie Off 2 2 1435736-5

2½ 2½ 1435736-6

3 3 1435736-7

4 4 1435736-8

Description Figure Size (in) Color Part Number

Multi-cell Spacers A 4 x1¼ White 1435756-1

1½ White 1435736-2

Staggered Multi-cell Spacers B 2 x1¼ White 1435736-3

2 White 1435736-3

A

Note: For innerduct handling and installation recommendations, see the

Reference Chapter, pages 277-279.


INN

ER

DU

CT


34

INNERDUCT


WO

RK

AR

EA

OU

TL

ET

S


35

WORK AREA OUTLETS

Chapter Summary

:: Outlet styles to meet every need

:: SL Series provides high density

and front-loadable modularity

:: 110Connect outlets are

available in plastic and stainless

steel, angled and straight

:: HIDEAWAY and HIDEOUT

outlets excel in fiber

connectivity

:: The AMP Communications

Outlet is uniquely suited for

sheath-sharing applications

:: Access Floor Workstation

Modules accommodate raised

flooring

:: Outlets for furniture and

raceway applications

Work Area Outlets:SL Series Products ...........................................................................36-45

110Connect Products.....................................................................46-56

Universal Office Boxes...........................................................................57

HIDEAWAY Outlet and Accessories ...........................................58-60

HIDEOUT Outlet ......................................................................................61

Multimedia Security Outlet ..................................................................62

Work Area Accessories ..................................................................62-63

SVGA Assembly..................................................................................62

Surface Boxes......................................................................................63

Modular Jack Boxes...........................................................................63

Products for Wiremold™ Raceways..................................................64

Surface Mount Outlet ............................................................................65

AMP Communications Outlet (ACO) Products.........................66-59

ACO Dual-Port Installation Kits .......................................................67

ACO Low Profile Dual-Port Installation Kits.................................68

ACO Faceplates ............................................................................69-72

ACO Inserts....................................................................................73-81

ACO Accessories ................................................................................82

Access Floor Workstation Modules and Accessories ............83-86

Desktop Monuments .............................................................................87

FLEX-MODE Products .....................................................................88-92

ACO Modular Furniture Products ................................................93-94

ACO Single-Port Installation Kits ....................................................92

ACO Single-Port Faceplates.............................................................93

ACO Modular Furniture Outlet........................................................93

Category 3 Keystone Jacks, Couplers & Faceplates ..............95-97

3

SL

SE

RIE

S M

T-R

J O

UT

LE

T J

AC

KS


36

WORK AREA OUTLETS

SL Series OutletsProduct Facts

:: Front-loading modules snap in and out

for easy access

:: Modular approach for flexibility

:: Patented “invisible” icon holes stay

hidden until used

:: Individual jacks and inserts increase

configuration and color-coding options

MT-RJ SECURE Connector System Outlet Jacks

Product Facts

:: No epoxy, no polish, no crimp

:: Jack version eliminates the need for a

separate coupler

:: Comes with actuation tool, bend-

limiting boot, and SL Series compatible

housing

:: Half the size of SC Duplex

:: Two fibers in one ferrule

:: No bench tool required

:: Tunable

:: Can be re-terminated

MT-RJ Outlet Jacks

Jack Type Jack Color Part Number

50/125µm Multimode Black 1278414-X

XG (850nm LO 50/125µm) Multimode Grey 1-1278414-2

62.5/125µm Multimode Beige 1278415-X

X denotes housing color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red, -

8=Yellow, -9=Green, 1- - 0=Violet, 1- -1=Electrical Ivory

Product Facts



:: Jack version eliminates the need for aseparate coupler

:: MT-RJ SECURE Connector Systemoffers color-coded, keyed jacks andplugs to limit access to securenetworks

:: Comes with actuation tool, bend-limiting boot, and SL Seriescompatible housing




:: Tunable

:: MT-RJ SECURE patch cableassemblies are available onpages 158 - 159

Jack Type Part Number

50/125µm Multimode 1278811-X

XG (850nm LO 50/125µm) Multimode 1754252-X

62.5/125µm Multimode 1278810-X

X denotes jack color: -1=Red, -2=Yellow, -3=Green -4=Blue

SL Series housing color matches jack color. Other housing colors available.

Strip

Easy 3-Step Termination

Cleave Lock

SL

SE

RIE

S M

OD

UL

AR

JA

CK

S


37

WORK AREA OUTLETS

Product Facts

:: Thin profile improves

outlet density

:: Modular Jacks available with

integral dust covers

:: 180° or 90° cable dress for

easy termination

:: Universal wiring label permits

wiring to T568A or T568B

:: Meet or exceed all TIA and ISO

component performance

requirements

:: Also compatible with 110Connect

Faceplates

:: Bend-limiting strain relief included

with unshielded jacks

:: UL listed

:: 8-Position RJ45 Modular Jacks for

1-, 2-, 3- and 4-Pair applications

SL Series 110Connect Modular Jacks

Category 6 Modular Jacks

Description Wiring Pattern Part Number

Unshielded1375055-X

With Dust Cover 1375187-XCategory 6 Modular Jack T568A/T568B

Shielded180° (Rear) Entry 1375188-1*

90° (Side) Entry 1479552-1*

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red, -8=Yellow, -9=Green,

1- - 0=Violet, 1- -1=Electrical Ivory

*Shielded jacks are not available in colors and do not accept strain reliefs.

Category 5E Modular Jacks


Unshielded1375192-X

Category 3 Modular Jack T568A/T568BWith Dust Cover 1375193-X

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange,

-6=Blue, -7=Red, -8=Yellow, -9=Green, 1- - 0=Violet, 1- -1=Electrical Ivory


Unshielded1375191-X

Category 5E Modular Jack T568A/T568BWith Dust Cover 1375190-X

Shielded180° (Rear) Entry 1375189-1*

90° (Side) Entry 1479717-1*

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red, -8=Yellow, -

9=Green, 1- - 0=Violet, 1- -1=Electrical Ivory


Product Facts


outlet density

:: Modular Jacks available with

integral dust covers

:: 180° or 90° cable dress for

easy termination


Faceplates

:: UL listed

:: 6-Position RJ11c/RJ14c/RJ25c

Modular Jacks for 1-, 2- and 3-Pair

applications


SL

SE

RIE

S M

OD

UL

AR

JA

CK

S A

ND

AC

CE

SS

OR

IES


38

WORK AREA OUTLETS

Product Facts


outlet density

:: Terminate with common pliers

:: Hinged stuffer cap simplifies

assembly

:: Jacks available with integral dust

covers


wiring to T568A or T568B

:: Meet or exceed all TIA and ISO


requirements


Faceplates

:: UL listed

:: 8-Position RJ45 Modular Jacks for

1-, 2-, 3- and 4-Pair applications

SL Series Toolless Jacks

Category 5e Modular Jacks

Product Facts


outlet density

:: Terminate with common pliers

:: Jacks available with integral dust

covers


Faceplates

:: UL listed

:: 6-Position RJ11c/RJ14c/RJ25c

Modular Jacks for 1-, 2- and 3-Pair

applications



Unshielded1116604-X

Category 5e Modular Jack T568A/T568B With Dust Cover 1339189-X

Shielded 180° (Rear) Entry 1339015-1*

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red, -8=Yellow,

-9=Green, 1- - 0=Violet, 1- -1=Electrical Ivory


Strain Reliefs for SL Series110Connect Modular Jacks

Product Facts

:: Provide strain relief for terminated

cables in the Work Area

:: For use with SL Series 110Connect

Modular Jacks only

Strain ReliefBend-Limiting Strain Relief

Description Used with Part Number

Bend-Limiting Strain Relief Category 6 1375200-1

Bend-Limiting Strain Relief Category 5E 1375200-2

Strain Relief Category 6, 5E, 3 1375157-1


Unshielded1116603-X

Category 3 Modular Jack T568A/T568BWith Dust Cover 1339188-X


-6=Blue, -7=Red, -8=Yellow, -9=Green, 1- - 0=Violet, 1- -1=Electrical Ivory

SL

SE

RIE

S M

UL

TIM

ED

IA J

AC

KS

AN

D IN

SE

RT

S


39

WORK AREA OUTLETS

SL Series Multimedia Jacks

Description Figure Part Number

Red Dielectric 1479230-X

Multimedia JackRCA A White Dielectric 1479231-X

Yellow Dielectric 1479232-X

S-Video B 1375149-X

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, 1- -1=Electrical Ivory

A B

Product Facts

:: Provide connections for different

media types

:: Configure faceplates to handle

various services

:: May be used in straight or angled

faceplate modules

:: Inserts easily snap into

SL Series Modules and duplex

mounting straps

:: Also compatible with 110Conenct

faceplates

Blank InsertPART NUMBER

1116412-X

Multimode ST-StylePART NUMBER

1339123-X

Singlemode ST-StylePART NUMBER

1479181-X

Multimode DuplexLCPART NUMBER 1435735-X

SL Series Inserts

Singlemode DuplexLCPART NUMBER 1435799-X


Product Facts

:: For use where distances are less than

130 ft.

:: Uses Standard 110 Termination and

will accept 26-22 AWG conductors

:: RCA Multimedia Jack

... For audio and video signals

... Uses on pair of twisted-pair cable

... White, red or yellow dielectrics to

match home theater equipment

:: S-Video Multimedia Jack

... For S-Video Y/C

(Luminance/Chrominance Black

and White/Color) signals

... Uses two pairs of a standard

twisted-pair cable

SL

SE

RIE

S IN

SE

RT

S


40

WORK AREA OUTLETS

RCA, Solder TypePART NUMBER

1375364 -X (red dielectric)

1375365-X (white dielectric)

1375366-X (yellow dielectric)

RCA, Feed-ThroughCouplerPART NUMBER

1375361-X (red dielectric)

1375362 -X (white dielectric)

1375363 -X (yellow dielectric)

Binding PostPART NUMBER

1375359-X (black)

1375360-X (red)

3.5mm Stereo,Mini-Headphone,Solder TypePART NUMBER

1479086-X

F - Connector CouplerPART NUMBER

1339121-X

Speaker PostPART NUMBER

1479190-X (Black Stripe)

1479191-X (Red Stripe)

Note: Accepts 18 - 12 AWG Wiring


BNC CouplerPART NUMBER

1339124 -X

SL

SE

RIE

S M

OD

UL

ES


41

WORK AREA OUTLETS

Product Facts

:: 1375123 is suitable for use with

Multimode connectors. 1375306 is

suitable for use with Singlemode

connectors

:: Suitable for multimode connectors

:: Couples SC duplex or simplex

connectors

:: Front Loading

Product Facts



connectors to ST-Style connectors

:: Front Loading

SL Series Modules

2-Fiber Duplex SC to SC Adapter - 1 UnitSINGLEMODE PART NUMBER 1375306-X

PART NUMBER 1375123-X

2-Fiber Duplex SC to ST-Style Adapter -1 UnitPART NUMBER 1375241-X

Front Back

SVGA Module, Unloaded-1 UnitPART NUMBER 1479079-X Product Facts

:: Accepts one standard SVGA

connector, adapter, or SVGA

Assembly, not included (see

page 62)

:: Front loading

:: Fit SL Series Faceplates




Back

SVGA Module, Loaded - 1 UnitPART NUMBER 1479288-X

Front


Product Facts

:: For PC/Monitor/projector video

applications and high/low outlets

for schools and conference rooms

:: Requires 9 conductors

:: Recommend for use with shielded

Cat 6 or 5e cable (utilizes drain wire

as 9th conductor)

:: Features 110-Style termination for

easy installation

:: Front loading

SL

SE

RIE

S M

OD

UL

ES


42

WORK AREA OUTLETS

SL Series Modules

Blank Module - 1 Unit



Product Facts

:: Front-loading

:: Fits SL Series Faceplates

3-Port Angled- 1.5 Units


2-Port Angled - 1.5 Units



Product Facts

:: Accepts unshielded SL Series

Jacks, MT-RJ Outlet Jacks and SL

Series Inserts

:: Front-loading



hidden until used

:: Icons on page 194

Product Facts

:: Accepts all SL Series Jacks,

unshielded 110Connect Jacks, MT-

RJ Outlet Jacks and

SL Series Inserts

:: Front-loading



hidden until used



2-Port Straight -1 Unit



Product Facts


unshielded 110Connect Jacks, MT-RJ

Outlet Jacks and

SL Series and 110Connect Inserts

:: Front-loading



hidden until used


SL

SE

RIE

S M

OD

UL

ES

AN

D F

AC

EP

LA

TE

S


43

WORK AREA OUTLETS

Product Facts

:: Accepts three 1U or two 1.5U SL

Series Modules

:: Front-loading modules eliminate

need to remove faceplates from

wall for changes or repairs

Product Facts

:: Accepts three 1U or two 1.5U SL

Series Modules




Faceplate -Double Gang, Double-SidedPART NUMBER 1479486-X

Product Facts

:: Accepts three 1U or two 1.5U

SL Series Modules on each side




:: Dimensions: 0.675" D x 4.490" W x

4.540" H

:: For use with openings a minimum

or 2.81" x 3.59" (not suitable for

mud rings/device covers)



Faceplate -Double Gang, Single-Sided




Blank Module - 1.5 Units

PART NUMBER 1116407-XProduct Facts

:: Front-loading


SL Series Faceplates

Faceplate-Single Gang


SL

SE

RIE

S M

OU

NT

ING

ST

RA

PS


44

WORK AREA OUTLETS

SL Series Mounting StrapsProduct Facts

:: Accepts up to 4 unshielded SL

Series Jacks, MT-RJ Outlet Jacks or

SL Series Inserts

:: High-density outlet solution for

poke-thru and floor fittings

:: Duplex and Decorator Faceplates

for Mounting Straps on page 55


4-Port Mounting StrapDuplex A 1339120-X

Decorator B 1479504-X


A B

SL

SE

RIE

S O

FF

ICE

BO

XE

S


45

WORK AREA OUTLETS

SL Series Office Boxes

Product Facts

:: Accepts unshielded SL Series

Jacks, MT-RJ Outlet Jacks and SL

Series Inserts

:: Compatible with most surface

raceways

:: Small footprint

:: Patented “invisible” icon holes

remain hidden when not used


2-Port 1339054-X

4-Port 1339057-X

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, 1--1=ElectricalIvory

Note: MT-RJ Jacks in office boxes will not use strain relief boots.

11

0C

ON

NE

CT

MO

DU

LA

R J

AC

KS


46

WORK AREA OUTLETS

110Connect SystemProduct Facts

:: Engineered as a system

for superior performance

:: Industry standard 110

punchdown blocks

:: Wide assortment of outlet styles

Product Facts

:: Category 5e Modular Jacks meet or

exceed TIA and ISO requirements


termination to either T568A or

T568B

:: UL listed

110Connect Modular Jacks

Category 5e Modular Jacks


Category 5e, Unshielded T568A/T568B 406372-X

Category 5e, Shielded T568A/T568B 1116515-1*

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red,

-8=Yellow, -9=Green, 1- -0=Violet, 1- -1=Electrical Ivory

*Shielded jacks are not available in colors.

11

0C

ON

NE

CT

JA

CK

S1

10

CO

NN

EC

T M

OD

UL

AR

JA

CK

S


47

WORK AREA OUTLETS

110Connect Modular Jacks



Category 3, 8-Position T568A/T568B 406373-X

Category 3, 6-Position RJ11C/RJ14C/RJ25C 406375-X

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red, -8=Yellow, -9=Green, 1- -0=Violet, 1- -1=Electrical Ivory


Product Facts

:: Category 5 Jacks meet or exceed

TIA and ISO requirements


termination to either T568A or

T568B

:: UL listed

Product Facts

:: Category 3 Jacks meet or exceed

TIA and ISO requirements

:: Universal wiring label for

8-position jacks permits termination

to either T568A

or T568B

:: UL listed

Product Facts

:: Available as an alternative

termination method

:: Provide additional strain relief

:: Each stuffer cap accommodates 2

pairs

:: For 110Connect Modular Jacks only

110Connect Stuffer CapsPART NUMBER 569332-1

Note: 50 per bag.


Category 5, Unshielded T568A/T568B 1479139-X

Category 5, Shielded T568A/T568B 1479140-1*

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red, -8=Yellow, -9=Green, 1- -0=Violet, 1- -1=Electrical Ivory

*Shielded jacks are not available in colors.

11

0C

ON

NE

CT

MU

LT

IME

DIA

INS

ER

TS

11

0C

ON

NE

CT

MU

LT

IME

DIA

INS

ER

TS


48

WORK AREA OUTLETS

110Connect Multimedia Inserts

Blank Insert406339-X

F -Connector406344 -X

MultimodeST- Style406343-X

BNC406345-X

RCA Solder Type406346-X

S -Video Coupler(Black only)1116315-2

3.5mm Stereo,Mini-Headphone1116496-X

F to G Coupler1116538-X

RCA to F1116554 -X


RCAFeed-ThroughCoupler1116498-X

MT-RJ 110Connect-Style HousingPART NUMBER 1278568-X


-6=Blue, -7=Red, -8=Yellow, -9=Green, 1- -0=Violet, 1- -1=Electrical Ivory

Product Facts

:: Holds one MT-RJ Outlet Jack (sold

separately) on page 36

11

0C

ON

NE

CT

FA

CE

PL

AT

ES


49

WORK AREA OUTLETS

Product Facts

:: Accepts all 110Connect Jacks,

SL Series Jacks, MT-RJ Outlet Jacks

and 110Connect Multimedia Inserts


Product Facts







Product Facts






2-Port Single GangPART NUMBER 557505-X

4 -Port Single GangPART NUMBER 558088-X

4 -Port Staggered Single GangPART NUMBER 557502-X

11

0C

ON

NE

CT

FA

CE

PL

AT

ES

11

0C

ON

NE

CT

FA

CE

PL

AT

ES


50

WORK AREA OUTLETS



Product Facts





6-Port Double GangPART NUMBER 83936-X

Product Facts





6-Port Single GangPART NUMBER 557691-X


Product Facts





4-Port Double GangPART NUMBER 83935-X

11

0C

ON

NE

CT

ST

AN

DA

RD

& A

NG

LE

D F

AC

EP

LA

TE

S


51

WORK AREA OUTLETS

12-Port Double GangPART NUMBER 558086-X Product Facts





Product Facts

:: Angled connector exits



and 110Connect and SL Series

Inserts

:: Protects connections

:: Allows closer furniture placement



4-Port Angled FaceplatePART NUMBER 406185 -X


2-Port Angled FaceplatePART NUMBER 1375155-X


11

0C

ON

NE

CT

FL

US

H F

AC

EP

LA

TE

S


52

WORK AREA OUTLETS

1-Port Flush Wall Phone FaceplatePART NUMBER 1479152-X Product Facts

:: Flush mount installation

:: Accepts all 110Connect and

SL Series Jacks

:: Mid-sized faceplate


Flush Faceplates

Product Facts


:: Accepts all 110Connect and SL Series

Jacks, MT-RJ Outlet Jacks and

110Connect and SL Series Inserts



1-Port Flush Faceplate PART NUMBER 1479443-X

Product Facts


:: Accepts all 110Connect and SL

Series Jacks, MT-RJ Outlet Jacks


Inserts




ST

AIN

LE

SS

ST

EE

L F

AC

EP

LA

TE

S1

10

CO

NN

EC

T F

LU

SH

FA

CE

PL

AT

ES


53

WORK AREA OUTLETS

3-Port Flush FaceplatePART NUMBER 1479445-X Product Facts







Product Facts








Product Facts








11

0C

ON

NE

CT

MO

UN

TIN

G S

TR

AP

S


54

WORK AREA OUTLETS

Mounting Straps

2-Port Duplex Strap


3-Port Decorator Strap




Product Facts




Multimedia Inserts

:: Fits duplex electrical faceplates

:: Allows for easy mounting of

communications outlets in power

poles and floor pedestals

:: Accommodates icons for

port identification


Mounting Straps

2-Port Decorator Strap



Product Facts



and 110Connect and SL Series Inserts

:: Fits decorator-style electrical

faceplates


communications outlets in power

poles and floor pedestals

:: Accommodates icons for

port identification


Product Facts



and 110Connect and SL Series Inserts

:: Fits decorator-style electrical

faceplates


communications outlets in power poles

and floor pedestals


MO

UN

TIN

G S

TR

AP

& S

TA

INL

ES

S S

TE

EL

FA

CE

PL

AT

ES


55

WORK AREA OUTLETS

Product Facts


:: Accepts all 110Connect and SL



Inserts

:: These faceplates are available

directly from:

Semtron, Inc.

6465 Corunna Rd.

Flint, MI 48532

Phone: 1-800-732-9080

Fax: 810-732-9665

Email: [email protected]

www.semtron.com

Stainless Steel Faceplates from Semtron

1-Port for Wall PhonePART NUMBER 1-ØE-A5-PHONE-DP

Also available in brass and bronze.

2-PortPART NUMBER 1FM-ØØE-AMP

Product Facts



SL Series Jacks

:: These faceplates are available

directly from:

Semtron, Inc.

6465 Corunna Rd.

Flint, MI 48532

Phone: 1-800-732-9080

Fax: 810-732-9665


www.semtron.com

Faceplates for Mounting Straps

Product Facts

:: Decorator Faceplates accept 2-,

3- and 4-Port Decorator Mounting

Straps

:: Duplex Faceplates accept 2- and

4-Port Duplex Mounting Straps


Decorator FaceplateSingle Gang A 1479159-X

Double Gang B 1479625-X

Duplex Faceplate Single Gang C 1479160-X

X denotes color: -1 = Almond, -2 = Black, -3 = White, -4 = Gray, 1- -1 = Ivory

A B C

ST

AIN

LE

SS

ST

EE

L F

AC

EP

LA

TE

S


56

WORK AREA OUTLETS

Double Gang with Power

Description Semtron Part Number

2-Port with power 2FM-DØØE-AMP

4-Port with power 2FM-D(4)ØE-AMP

6-Port with power 2FM-D(6)ØE-AMP


Product Facts





:: Double Gang Stainless Steel

Faceplates with Power accept on

duplex power receptical and all

110Connect and SL Series Jacks,

MT-RJ Outlet Jacks and 110Connect

and SL Series Inserts in the number of

ports listed

:: These faceplates are available directly

from:

Semtron, Inc.

6465 Corunna Rd.

Flint, MI 48532

Phone: 1-800-732-9080

Fax: 810-732-9665


www.semtron.com

6-Port

PART NUMBER 1FM-(6)ØE-AMP



Stainless Steel Faceplates from Semtron

4 -PortPART NUMBER 1FM-(4)ØE-AMP

C

UN

IVE

RS

AL

OF

FIC

E B

OX

ES


57

WORK AREA OUTLETS

B

Description Figure Dimensions Part Numbers

2-Port A 1.1”H x 3.0”W x 3.0”D 1479488-X

Universal Office Box 4-Port B 1.1”H x 5.0”W x 3.0”D 1479489-X

6-Port C 1.1”H x 7.0”W x 3.0”D 1479490-X

Blank D - 1479494-X

Universal Office Box Inserts ST-Style, Multimode E - 1479495-X

F-Connector F - 1479496-X

Surface Mount Magnets for Universal Office Boxes* Pack of 4 G 0.2”H x 1.1”W x 0.6”D 1479398-1*

-X denotes color: -1 = Almond , -2 = Black , -3 = White , -4 = Gray , 1- -1 = Electrical

*Note: Surface Mount Magnets are for use with 4- and 6-Port Universal Office Boxes Only.

Universal Office Boxes and Accessories

G

A

Product Facts


Jacks, MT-RJ Outlet Jacks, and


:: Molded numbering for each port

:: Uses same labeling and label covers as

standard faceplates

:: Low profile design

:: Features fiber loop storage

:: Compatible with most surface raceways

:: Mounts to standard NEMA single and

double gang surface boxes

:: Features knockout that will accept SL

Series 1 Unit inserts

:: Integrated modular jack holder for

terminations

:: Patented "invisible" Icon holes stay

hidden until used

:: Accommodates up to twelve 4-Pair cables

12-Port Universal Office BoxPART NUMBER 1479358-X

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Electrical Ivory

Product Facts

:: Provide flexible surface mounting of

2-, 4- or 6-ports

:: Accept 110Connect and SL Series

Modular Jacks and specially designed

inserts

:: Compatible with surface raceway

systems and modular furniture

raceways

:: Can be labeled and iconified for easy

port identification

D

E

F

HID

EA

WA

Y M

UL

TIM

ED

IA O

UT

LE

TS


58

WORK AREA OUTLETS

Product Facts

:: Holds up to two unshielded

110Connect Jacks or inserts listed

on page 60, and one fiber optic

adapter or MT-RJ Parallel Dress Clip

(simplex or duplex) on page 60


Faceplate KitSingle Gang, UTP and FiberPART NUMBER 406187-X


HIDEAWAY Multimedia OutletsProduct Facts

:: Accept jacks, inserts and adapters as

listed

:: Support multimedia

:: Front-loading jacks

:: Angled connector exits

:: Holding clip for hands-free termination

:: Built-in fiber cable management

:: All HideAway Outlets fit single gang

boxes

HID

EA

WA

Y M

UL

TIM

ED

IA O

UT

LE

TS


59

WORK AREA OUTLETS

Product Facts

:: Holds up to four unshielded

110Connect Jacks or inserts

listed on page 60


Faceplate KitSingle Gang, UTPPART NUMBER 406186-X



Product Facts

:: Holds up to four unshielded

110Connect Jacks or inserts listed

on page 60 and two fiber optic

adapters or MT-RJ Parallel Dress

Clips (simplex or duplex) listed on

page 60

:: Fits both single and double

gang boxes


Faceplate Kit

Double Gang, UTP and Fiber


HID

EA

WA

Y O

UT

LE

T A

CC

ES

SO

RIE

S


60

WORK AREA OUTLETS

Product Facts

:: 1-Port holds one MT-RJ Jack sold

separately

:: 2-Port holds two MT-RJ Jacks sold

separately

:: MT-RJ Outlet Jacks (on page 36)

not included

MM Duplex Fiber Optic Adapters

SC/SC

PART NUMBER 504640-3

SC/ST-Style


Optical fiber couplers are Almond.

ST-Style/ST-Style


MT-RJ Parallel Dress Clipsfor HIDEAWAY Outlet


1-Port Pkg of 6 1374206-1

2-Port Pkg of 3 1374205-1

F - Connector

PART NUMBER

406245-X

BNC

PART NUMBER

406247-X

RCA Solder Type

PART NUMBER

406896 -X

Blank Insert

PART NUMBER

406058 -X

Multimedia Inserts for HideAway Outlet


HID

EO

UT

OU

TL

ET

S


61

WORK AREA OUTLETS

HIDEOUT Outlet


Snap-On Faceplate Kit 503999-X

Snap-On Faceplate Only 504641-X

Screw-On Faceplate Kit 503997-X

Stainless Steel Screw-On Faceplate Kit 503998-1

Screw-On Faceplate Only 504629-X

Stainless Steel Screw-On Faceplate Only 504643-1

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray

Product Facts

:: Double gang box with single gang

cover recommended. May not fit all

single gang boxes

:: Hides and protects cable connections

:: Feeds from bottom to allow flush

furniture placement

:: Accepts unshielded 110Connect or

SL Series Modular and Multimedia

Jacks, MT-RJ Outlet Jacks, duplex

fiber optic adapters, MT-RJ Parallel

Dress Clips, or 110Connect or SL

Series Inserts

:: Multimedia options:

... Four 110Connect Jacks and

one MT-RJ Parallel Dress Clip

(simplex or duplex) or one

duplex fiber optic adapter... Four 110Connect Jacks... Two MT-RJ Parallel Dress

Clips (simplex or duplex) or

two duplex fiber optic

adapters

:: Match office with choice of four

decorator colors or stainless steel

faceplate

:: Fits standard electrical boxes


:: Each kit includes subplate, faceplate,

adhesive labels, cable ties, and

mounting screws. Media modules and

icons must be ordered separately.

Faceplates are plastic except for the

stainless steel version

Screw-on Cover

Snap-on Cover

MU

LT

IME

DIA

SE

CU

RIT

Y O

UT

LE

T &

AC

CE

SS

OR

IES


62

WORK AREA OUTLETS

Product Facts

:: Designed to provide a high-capacity

outlet with the flexibility to

accommodate a wide assortment of

multimedia inserts

:: Ideally suited for “high-low” (remote

monitor) outlet applications in

classrooms

and training facilities

:: Capable of supporting up to nine

ports of copper, coax and/or optical

fiber connectivity as well as an

SVGA and a duplex fiber optic

adapter

:: Accepts all 110Connect Modular

Jacks (on pages 46-47), all SL

Series Jacks (on pages 36-39),

duplex fiber optic adapters (on page

60), all MT-RJ Outlet Jacks (on page

36) and Inserts (on page 137)

Multimedia Security Outlet


Cover Security Screw

Product Facts

:: Features 110-Style termination for easy

installation

:: For use with Unloaded SVGA Module,

Multimedia Security Outlet (page 62) or

in most other places you can mount an

SVGA connector

:: Dimensions: 1.180" D x 1.480" W x

0.875" H

... Stuffer caps and hex head

stand-off screws included

Work Area Accessories

SVGA Assembly


Back

MO

DU

LA

R J

AC

K A

ND

SU

RF

AC

E M

OU

NT

BO

XE

S


63

WORK AREA OUTLETS

Modular Jack Boxes

Product Facts

:: Accepts unshielded 110Connect

and SL Series Jacks and MT-RJ

Outlet Jacks

:: Includes knockouts for icons




1-Port 1116697-X

2-Port 1116698-X

X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, 1--1=Electrical Ivory

Note: Modular jack boxes do not accept inserts.

Product Facts

:: One-piece construction

simplifies installation

:: Single gang surface box is

13/4 inches deep

:: Double gang surface box is

2 inches deep

Work Area Accessories

Surface Boxes


Single Gang 558251-X

Double Gang 569499-X

Xdenotescolor:-1=Almond,-2=Black,-3=White,-4=Gray,-5=ElectricalIvory

PR

OD

UC

TS

FO

R W

IRE

MO

LD

™ R

AC

EW

AY

S


64

WORK AREA OUTLETS

Products for WIREMOLD Raceways

3-Port Almond Faceplate


Product Facts

:: Designed to be identical to

Wiremold™ 5507 Series Faceplates

and will mount in 4049, 5400, and

5500 series device plates and

brackets

:: 3-Port faceplate accepts all

110Connect and SL Series Jacks

and Inserts

:: 4-Port faceplate accepts all

SL Series Jacks and Inserts



4 -Port Almond Faceplate


Description Color Part Number

Ivory CM2-U2AMP

White CM2-U2AMP-WH

Wiremold 2A, 2-Port Insert Black CM2-U2AMP-BK

Gray - Steel Raceway CM2-U2AMP-G

Light Gray - Aluminum Raceway CM2-U2AMP-GY

Product Facts

:: Allows the use of SL Series Jacks and

Inserts in Wiremold raceways, poke-

thru service fittings, and power poles.

:: Accepts up to two SL Series Jacks or

Inserts

:: Installation and configuration ease.

Modules feature a front load snap-in

design for ease of installation and

allowing outlet configuration changes

to be made quickly

:: Contact:

The Wiremold Company

60 Woodlawn Street

West Hartford, CT 06110

1-800-621-0049

FAX 860-232-2062

www.wiremold.com

Wiremold 2A Inserts

X denotes color: -1 = Almond, -4 = Gray

X denotes color: -1 = Almond, -4 = Gray

SU

RF

AC

E M

OU

NT

OU

TL

ET

AN

D A

CC

ES

SO

RIE

S


65

WORK AREA OUTLETS

Suggested Loading Pattern for the Surface Mount Outlet

Application Chart

The application chart is a suggested

loading pattern for the Surface Mount

Outlet. The Surface Mount Outlet inserts

can be configured according to network

requirements. The size of the connectors,

however, limits some applications. In

particular, the corner slots present some

loading problems when using larger

connectors. Therefore, this application

chart was developed to assist in adjacent

corner connector configuration.

The asterisks in the chart are suggested

loading patterns for the corner slots of the

Surface Mount Outlet.


Assembly - Top, bottom, label, cover, hardware, 8 blank inserts 557366-1

Blank Insert 557361-1

Surface Raceway Adapter 557685-1

Inserts

Duplex ST-Style or Duplex SC (Fiber receptacles not included, see page 39) 1116111-1

Dual ST-Style Bulkhead Adapter (Receptacle included) 557350-1

AMP Communications Outlet Adapter (Requires single-port installation kit and connector insert) 557364-1

Single 110Connect Jack, SL Series or MT-RJ (Jack not included) 1116098-1

Dual 110Connect Jack, SL Series or MT-RJ (Jacks not included) 557775-1

Dual BNC Jack-to-Jack Adapter 557776-1

F Series Jack-to-Jack Adapter 557772-1

Accessories

Underfloor Duct Adapter Kit 557913-1

Surface Mount Outlet is available in Almond only.

Surface Mount OutletPART NUMBER 557366-1 Product Facts

:: Provides a convenient and

aesthetically pleasing workstation

outlet for every network need

:: Capability to install mixed media:

coax, fiber and twisted pair

:: Simply select the adapter kits for

the media being used and install

them in the Surface Mount Outlet

:: The kit is shipped with matching

icons. Additional

icons on page 194

Du

al

ST

-Sty

le/S

C

BN

C F

ee

d T

hro

ug

h

AM

P C

om

m.

Ou

tle

t

11

0,

SL

Se

rie

s,

MT

-RJ

Ja

ck

s

Du

al1

10

,SL

Se

rie

s,

MT

-RJ

Ja

ck

s

Dual ST-Style or SC *

BNC Feed Through * *

AMP Communications Outlet

110, SL Series, MT-RJ Jacks * * * *

Dual 110, SL Series, MT-RJ Jacks * *

AM

P C

OM

MU

NIC

AT

ION

S O

UT

LE

T (A

CO

)


66

WORK AREA OUTLETS

The core of the ACO system is the installation kit which

mounts into standard electrical boxes. Edge connectors in the

rear of the installation kit are terminated to horizontal cabling.

The edge connectors, in turn, accept pluggable inserts which

snap into the edge connectors to provide the interface for

equipment (phone, computer, printer, etc.).

This combination of card edge connectors and pluggable

inserts provides a reconfigurable connector interface which

doesn’t require re-termination of the cable.

The inserts take care of providing the appropriate connector

interface and pinout to match the equipment in use. When

that equipment changes, the adapter insert can be replaced by

simply removing the faceplate, snapping out the old insert and

snapping in a new one, a process which takes about a minute.

Dual connector inserts also help to maximize cable usage

through sheath-sharing, combining two applications, such as

100BASE-T, on one 4-pair cable.

How to Order an AMP Communications Outlet

System

:: Choose the appropriate installation kit to meet your cable

(shielded or unshielded, Category 5e or Category 6) and

mounting requirements:

··· Dual-port kits (page 67) for fixed wall, Access Floor

Workstation Module and surface mounted applications

··· Single-port kits (page 93) for modular furniture, AMP

Furniture Outlet, AMP Surface Mount Outlet and

undercarpet applications

:: Choose the appropriate inserts to match your applications:

··· Category 6 inserts page 73

··· Category 5e inserts pages 73-77

··· Category 3 inserts pages 77-79

··· 150 Ohm STP inserts page 81

Make sure to order inserts for patch panels as well as

workstation outlets.

:: Choose the appropriate faceplate (pages 68-72 and 94)

:: Choose the appropriate shielded or unshielded patch panel

kit (pages 140-141)

Cable AssembliesPages 163-165

FaceplatesPages 68-72

Adapter InsertsPages 73-81

Dual-Port Installation KitsPage 67

Edge ConnectorsPage 82

Patch PanelsPages 138-141

Twisted Pair CablePages 21-24

Single-PortInstallation Kits

Page 93

AMP Communications Outlet (ACO)

Product Facts

:: Used to mount ACO Inserts

:: Category 6 Dual-Port Installation Kits -

··· Combines the flexibility and

adaptability of the ACO System

with the performance and

headroom of AMP NETCONNECT

Category 6

··· Exceed TIA and ISO requirements

for Category 6 component

performance requirements when

combined with Category 6 Inserts

··· Category 6 ACO Installation Kits

are backwardly compatible with

standard ACO Inserts

··· Unshielded kits include unshielded

insert housing, and two edge

connectors

··· Unshielded kits are recommended

for installation in 4" square x 2-1/2"

deep electrical boxes with standard

100 Ohm UTP cable

:: Standard Dual-Port Installation Kits

··· Both 110-Style and AMP-BARREL

terminations provide Category 5e

performance when combined with

Category 5e inserts

··· Available in both shielded and

unshielded kits

··· Unshielded kits include unshielded

insert housing, and two edge

connectors

··· Unshielded kits are recommended

for installation in 4" square x 2-1/2"


100 Ohm UTP cable

··· Shielded kits include shielded

insert housing, two edge

connectors, ground shield and

shield clip/strain-relief

··· Shielded kits are recommended for

installation in 4" square x 2-1/2"


100 Ohm shielded cable (110-Style

Edge Connectors) or 150 Ohm

Type 1 cable (AMP-BARREL Edge

Connectors)

AC

O D

UA

L-P

OR

T IN

ST

AL

LA

TIO

N K

ITS


67

WORK AREA OUTLETS

Description Edge Connector Part Number

Category 6 Dual-Port Installation Kit 110-Style Unshielded 1479306-1

110-Style Unshielded 406091-1

Standard Dual-Port Installation KitAMP-BARREL

Unshielded 406352-1

Shielded 555601-1

Note: 110-Style Edge Connectors are not for use with Type 1 Cable.

AMP Communications Outlet (ACO)

Installation Kits

Category 6 and Standard ACO Dual-Port

Installation Kits

Standard AMP-BARREL Standard 110-Style

Category 6, 110-Style

LO

W P

RO

FIL

E A

CO

INS

TA

LL

AT

ION

KIT

S


68

WORK AREA OUTLETS

Low Profile ACO Installation Kits and Faceplate


Category 6, Dual-Port, Low Profile Installation Kit 110-Style Unshielded 1479307-1

Standard, Dual-Port, Low Profile Installation Kit 110-Style Unshielded 406090-1

Low Profile Faceplate 406089-X

X denotes faceplate color: -1=Almond, -3=Black, -4=Gray, -5=White, -6=Electrical Ivory

Product Facts

:: Used to mount ACO Inserts in flush

mount configurations

:: Offered in four colors

:: Accepts icons and labels for easy

identification

:: Kits include unshielded insert

housing, and two edge connectors

:: Recommended for installation in 4"

square x 2-1/2" deep electrical boxes

with standard 100 Ohm UTP cable

:: Category 6 Dual-Port Installation Kits -

··· Exceed TIA and ISO requirements

for Category 6 component

performance requirements when

combined with Category 6 Inserts

··· Category 6 ACO Installation Kits

are backwardly compatible with

standard ACO Inserts

:: Standard Dual-Port Installation Kits

··· Provide Category 5e performance

when combined with Category 5e

inserts

Standard, Low Profile

Installation Kit

Low Profile Faceplate

Category 6, Low Profile

Installation Kit

AC

O F

AC

EP

LA

TE

S


69

WORK AREA OUTLETS

Faceplate Kits - Single Gang

Iconable Non-IconablePART NUMBER 558510-X PART NUMBER 555650-X

Product Facts

:: Tyco Electronics recommends that

a double gang box be used in all

initial installations to allow for

future expansion. A double gang

faceplate with one side blank is

initially installed and is replaced

with a double gang faceplate as

additional outlets are needed


X denotes faceplate color: -1=Almond, -5=White, -6=Electrical Ivory


Faceplate Kit -Double GangOne Side BlankPART NUMBER 556340-X

AC

O F

AC

EP

LA

TE

S


70

WORK AREA OUTLETS

For IBM Surface BoxPART NUMBER 556574-1

See ACO Modular Furniture Outlets on pages 93 and 94.

AMP Furniture OutletModular Furniture

Single-Port Outlets

Faceplates-Double Gang

Accommodates Two Installation KitsPART NUMBER 555670-X

ICONABLE, PART NUMBER 558512-X

Product Facts

:: Tyco Electronics recommends that

a double gang box be used in all

initial installations to allow for

future expansion. A double gang

faceplate with one side blank is

initially installed and is replaced

with a double gang faceplate as

additional outlets are needed


Product Facts

:: This faceplate is designed to be

used in place of the faceplate on

IBM Surface Box Part No. 4760486

or equivalent for ACO surface

mount applications

:: Available in Pearl White only


Note: Requires removal of inside mounting ears from installation kits (shielded kits only.)

AC

O S

TA

INL

ES

S S

TE

EL

FA

CE

PL

AT

ES


71

WORK AREA OUTLETS

Product Facts

:: Recessed box with mounting

bracket and four screws

:: Mounts directly to drywall or

paneling (1/4" to 5/8" thick)

:: Accepts two dual-port installation

kits on page 68

:: Optional snap-on cover

:: Order faceplates separately

Double Gang Recessed BoxWith Mounting BracketPART NUMBER 556598-1

Snap -On CoverPART NUMBER 556599-1

SEMTRON Faceplates

Stainless Steel-Single Gang


Single Gang Mounting Platefor Hubbell “LO-CON”Service FittingPART NUMBER HUBACO

Single Gang Mounting Platefor Walker 500/501 FloorFittingsPART NUMBER 500ACO

Product Facts

:: Semtron, Inc., manufactures

single gang faceplates for the

AMP Communications Outlet in

stainless steel and brass

:: Special plates that allow the

standard installation kits

(555601) to be mounted in

WALKERDUCT 500/501

pedestal series and Hubbell

LO-CON above-floor models

FR-15/35/355/55 are available

:: These and other custom

faceplates are available directly

from:

Semtron, Inc.

G-6465 Corunna Rd.

Flint, MI 48504

Phone: 1-800-732-9080

Fax: 810-732-9665


www.semtron.com

AC

O F

IBE

R O

PT

IC F

AC

EP

LA

TE

S


72

WORK AREA OUTLETS

Fiber Optic/AMP Communications Outlet

Four ST-Style Adapters with Dual-Port ACOPART NUMBER 502604-1 Product Facts

:: Includes fiber optic adapters

:: ACO Inserts and Installation Kits

sold separately

:: Fiber optic adapters suitable

for multimode connectors


Two ST-Style Adapters with Dual-Port ACOPART NUMBER 502604 -2 Product Facts



sold separately



Product Facts



sold separately

:: Integral dust cover doors for fiber

optic adapters




Two Duplex SC to SC Adapters With Dual-Port ACOPART NUMBER 503662-2

AC

O C

AT

EG

OR

Y 6

AN

D 5

eIN

SE

RT

S


73

WORK AREA OUTLETS

Category 6, T568B WiringUNSHIELDED/SHIELDED PART NUMBER 1644027-X

X denotes colors: -1=Almond, -3=Black, -4=Gray, -5=White, -6=Electrical Ivory

X denotes Insert color: -1 = Almond, -3 = Black, -5 = White

Note: for use with Category 6 ACO Installation Kits only.

AMP Communications Outlet/Category 6 Inserts for 100 Ohm Cable

Category 6, T568A WiringUNSHIELDED/SHIELDED PART NUMBER 1644031-X

AMP Communications Outlet/Enhanced Category 5 Insertsfor 100 Ohm Cable

Category 5e, T568A WiringUNSHIELDED PART NUMBER 558908-X

AMP NETCONNECT Category 5e inserts comply with all requirements of TIA/EIA-568-B and ISO 11801. Dual inserts allow

the combination of two applications on one 4-pair cable. Two 10BASE-T or two 16 Mbps token ring links may safely be

combined on a single 4-pair Category 5 cable within certain design parameters. When combined with AMP NETCONNECT

Enhanced Category 5 cable, dual Category 5e inserts have been verified to support dual transmissions up to 100BASE-T

and/or 155 Mbps ATM.

Note: The simplest way to test and certify an ACO installation that will use dual inserts is to use single 4-pair inserts for testing

prior to installing the dual inserts.

X denotes Insert color: -1 = Almond, -3 = Black, -5 = White

Note: for use with Category 6 ACO Installation Kits only.

AC

O C

AT

EG

OR

Y 5

eIN

SE

RT

S


74

WORK AREA OUTLETS

AMP Communications Outlet/Enhanced Category 5 Inserts for 100 Ohm Cable

Category 5e, T568B WiringUNSHIELDED PART NUMBER 558909-X

Category 5e, T568B WiringSHIELDED PART NUMBER 406955-X




Category 5e, T568A WiringSHIELDED PART NUMBER 406956-X

AC

O C

AT

EG

OR

Y 5

eIN

SE

RT

S


75

WORK AREA OUTLETS

Category 5e, Dual 10/100BASE-T WiringSHIELDED PART NUMBER 557284 -X



Category 5e, Dual Token Ring WiringUNSHIELDED PART NUMBER 558907-X



Category 5e, Dual 10/100BASE-T WiringUNSHIELDED PART NUMBER 557280-X

Category 5e, Dual Token Ring WiringSHIELDED PART NUMBER 406957-X

AC

O C

AT

EG

OR

Y 5

eIN

SE

RT

S


76

WORK AREA OUTLETS


Category 5e, Dual ATM/TP-PMD WiringUNSHIELDED PART NUMBER 557272-X

Category 5e, Token Ring & 10/100BASE-T WiringUNSHIELDED PART NUMBER 557260-X



Category 5e, Token Ring & ATM/TP-PMD WiringUNSHIELDED PART NUMBER 558913-X

AC

O C

AT

EG

OR

Y 5

eA

ND

3 IN

SE

RT

S


77

WORK AREA OUTLETS

Category 5e, 10/100BASE-T & ATM WiringUNSHIELDED PART NUMBER 558914 -X

8-Position Modular Jack-T568A Wiring10BASE-T & Token Ring CompatibleSHIELDED PART NUMBER 555643-X





8-Position Modular Jack-T568A Wiring10BASE-T & Token Ring CompatibleUNSHIELDED PART NUMBER 555672 -X

AC

O C

AT

EG

OR

Y 3

INS

ER

TS


78

WORK AREA OUTLETS


8-Position Modular Jack-T568B Wiring10BASE-T & Token Ring CompatibleUNSHIELDED, PART NUMBER 555621-X

8-Position Modular Jack-T568B Wiring10BASE-T & Token Ring CompatibleSHIELDED, PART NUMBER 555669-X

8-Position Modular JackUSOC RJ61X WiringUNSHIELDED, PART NUMBER 555625 -X




AC

O C

AT

EG

OR

Y 3

INS

ER

TS


79

WORK AREA OUTLETS


6-Position Modular JackRJ11/RJ14/RJ25 CompatiblePART NUMBER 555611-X

Dual 6-Position Modular Jack(2-Pair/2-Pair)PART NUMBER 555614 -X

Dual 6-Position Modular Jack(3 -Pair/1-Pair)






80

WORK AREA OUTLETS

BNC Bulkhead Jack- to-Jack SplicePART NUMBER 555642-X

75 Ohm F Series Bulkhead Jack- to-Jack SplicePART NUMBER 555645-X


Note: Card edge connector not used with this insert.


Note: Card edge connector not used with this insert.

X denotes color: -1=Almond, -3=Black, -5=Gray, -9=White, 1- -1=Electrical Ivory

Miscellaneous Inserts

Blank Insert Cover

PART NUMBER 555644 -X

AC

O M

ISC

EL

LA

NE

OU

S IN

SE

RT

S

AC

O 1

50

OH

M IN

SE

RT

S


81

WORK AREA OUTLETS

AMP Communications Outlet/Inserts for 150 Ohm 2-Pair Shielded Cable

Impedance Matching Insert8-Position 100:150 10/100BASE-TPART NUMBER 558912-X Product Facts

:: 100 Ohm to 150 Ohm impedance

matching for 10/100BASE-T on

Type 1 cable



AMP Communications Outlet/Inserts for 150 Ohm 2-Pair Shielded Cable

4 -Position Data ConnectorPART NUMBER 555631-1 Product Facts

:: Functionally equivalent to

IBM #8310574

:: IEEE 802.5 compatible

Shielded, 8-Position Modular JackToken Ring WiringPART NUMBER 557243-X

AC

O E

DG

E C

ON

NE

CT

OR

AS

SE

MB

LIE

S


82

WORK AREA OUTLETS

Product Facts

:: This edge connector is designed for

use with the pistol grip tool and the

punchdown tool (on pages 242-243)

Description Termination Figure Part Number

Category 6 110-Style A 1479305-1

110-Style B 406350-1Edge Connector KitCategory 5e AMP-BARREL Pistol Grip Tool C 406351-1

AMP-BARREL D 406397-1

Edge Connector Assembly

A

B

CD

Ground Shield Kit

PART NUMBER 555725-1Product Facts

:: Used when two ports of connector

housing are to

be shielded

AC

CE

SS

FL

OO

R W

OR

KS

TA

TIO

N M

OD

UL

ES


83

WORK AREA OUTLETS

Access Floor Workstation Modules Product Facts

:: Provide power and communications

connectivity in raised flooring

:: 2, 3, 4, and 5 gang sizes

available

:: For use with carpet squares

:: Load bearing exceeds UL and

agency requirements–

•UL listed, CSA certified

•UL 514A metallic outlet boxes

•UL 514C non-metallic

outlet boxes

•UL 183 manufactured wiring

system

•CSA C22-2 No. 18-M1987

outlet boxes, conduit boxes

and fittings

:: Access Floor Workstation Modules

shown loaded for reference only

5 Gang Access Floor Workstation ModulePART NUMBER 1116700-X Product Facts

:: 5 Gangs (2 gangs of power and 3

gangs of communications)

:: Accepts all standard

AFWM Faceplates

:: Large cable opening enables

disassembly and relocation without

re-termination of communications

connectors

:: Complies with NEC 300-22(c)

requirements for use in

environmental air spaces

:: 8" x 12", 5.25" min. floor height (top

of raised floor

to top of main floor)

X denotes color: -1=Almond, -2=Storm Gray, -3=Black, -4=NEMA Gray

AC

CE

SS

FL

OO

R W

OR

KS

TA

TIO

N M

OD

UL

ES


84

WORK AREA OUTLETS

5 Gang Access Floor Workstation ModulePART NUMBER 557601-X Product Facts

:: 5 Gangs–any combination of power

and communications


AFWM Faceplates

:: Outlets flip up above floor for easy

access

:: Large cable opening enables

disassembly and relocation without

re-termination of communications

connectors

:: Suitable for use in

non-environmental air spaces


of raised floor to top of main floor)

4 Gang Access Floor Workstation ModulePART NUMBER 406376-X

Product Facts

:: 4 Gangs–2 accept duplex power

receptacles, 2 accept standard

FLEX-MODE Electrical Faceplates

:: Shallow profile provides easy

access to connections





of raised floor to top of main floor)




Product Facts


and communications


AFWM Faceplates




:: 7.375" x 7.375", 5.5" min. floor

height (top of raised floor to top of

main floor)


AC

CE

SS

FL

OO

R W

OR

KS

TA

TIO

N M

OD

UL

ES


85

WORK AREA OUTLETS


Product Facts

:: Accept Access Floor Workstation

Modules as listed

:: Allows for installation of Access

Floor Workstation Module in slab-on

grade applications

:: AFWM boxes are purchased

separately

:: Contact:

Barthelmes Mfg. Co., Inc.

15 Cairn Street

Rochester, NY 14611-2491

Telephone: 585-328-8140

www.barthelmes.com

Product Facts


and communications

:: Each gang accepts a duplex

electrical receptacle or duplex

mounting strap for communications

connectors




:: 7.375" x 7.375", 3.5" min. floor

height (top of raised floor to top of

main floor)

Concrete Form Boxes from Barthelmes


Accepts OD (in Inches)Barthelmes

Part Number

4 & 5 Gang AFW Modules18"W x 18"D x 6.3"H

U135806

2 & 3 Gang AFW Modules U135820

4 Gang AFW Modules18"W x 18"D x 3.5"H U135830

18"W x 18"D x 2.75"H U135840

Note: AFWM boxes are purchased separately

Product Facts

:: Can be easily field changed

:: Available in 4 colors

:: Kit shipped fully assembled

2 and 3 Gang Access Floor WorkstationModule Lid Replacement KitPART NUMBER 558717-X


FA

CE

PL

AT

ES

AN

D IN

SE

RT

S F

OR

AF

WM


86

WORK AREA OUTLETS

Flush FaceplatesProduct Facts

:: Include faceplate and mounting

hardware

:: For 3 and 5 Gang Access Floor

Workstation Modules only

:: 2-, 3-, and 4-port faceplates accept

inserts for Modular Jack Panels and

standard FLEX-MODE Electrical

Faceplates

Figure Description Part Number

A 2-Port Accepts two 110Connect, SL Series or MT-RJ Outlet Jacks 569916-X

B 3-Port Accepts three 110Connect, SL Series or MT-RJ Outlet Jacks 569917-X

C 4-Port Accepts four SL Series or MT-RJ Outlet Jacks 1116695-X

D ACO Accepts one dual-port low profile AMP Communications Outlet 769021-X

E FLEX-MODE Accepts one standard FLEX-MODE Module 769020-X

F Blank May also be cut or punched for custom mounting 557655-X

Power Receptacle Faceplates

G Standard Accepts one “double D”duplex receptacle or duplex mounting strap 769028-X

H Decorator Accepts one decorator-style receptacle or decorator mounting strap 769016-X

Fiber Optic Faceplates (For MT-RJ Faceplates see A, B and C above.)

I 2-Port ST-Style Includes two multimode ST-Style couplers 557322-X

J 4-Port ST-Style Includes four multimode ST-Style couplers 557474-X

K Duplex SC Accepts one duplex SC adapter 569646-X

L Dual Duplex SC Accepts two duplex SC adapters 569648-X

Inserts for Flush Faceplates (For use with A, B and C above.)

M Blank Insert (Available in Black -1, or Almond-2) 558856-X

N BNC (Available in Black -1, or Almond-2) 558861-X

O F-Connector (Available in Black -1, or Almond-2) 558862-X

P RCA Solder Type (Available in Black -1, or Almond-2) 569983-X

X denotes color: -1=Almond, -2=Storm Gray, -4=NEMA Gray, -5=White

A B C D

E F G H

I J K L M N O P

DE

SK

TO

P M

ON

UM

EN

TS


87

WORK AREA OUTLETS

The power monument provides user

access to a duplex outlet at the desktop. It

eliminates the need to feed power cables

down behind or through desks. The

monument is supplied with an 8-foot

(2.4m), 3-prong power cord for attachment

to the existing electrical outlets.

The voice/data monument is designed to

accept standard FLEX-MODE Faceplates.

For Category 5e applications, the

horizontal cabling should be connected

directly to the 110Connect Jacks to meet

the requirements of ANSI/TIA/EIA-568-A.

For voice or Category 3 applications, a

user-supplied, single-ended modular plug

patch cord could be used to connect the

monument to an existing

telecommunication outlet.

Both monuments attach to any desktop

from .900" to 1.780" (22.9 - 45.2mm)

thick. No special tools are required; simply

place the unit onto the edge of the desktop

and tighten the thumb screw that is

integrated into the mounting bracket.

Description Color/Loading Part Number

Power Monument, 15 AmpGray 556222-1

Black 556222-3

Category 3 Voice/Data MonumentGray, includes two 6-position Keystone Jacks 556263-1

Gray, includes two 8-position Keystone Jacks 556263-2

Voice/Data Monument Empty HousingGray, requires FLEX-MODE Faceplate 1116360-2

Black, requires FLEX-MODE Faceplate 1116360-3

Product Facts

:: Additional 110Connect Jacks

on pages 46-47, SL Series Jacks on

pages 36-39, MT-RJ Outlet Jacks on

page 36, FLEX-MODE Electrical

Faceplates on pages 88-89

Desktop Monuments

FL

EX

-MO

DE

FA

CE

PL

AT

ES


88

WORK AREA OUTLETS

FLEX -MODE Modular Furniture Faceplate KitsProduct Facts

:: FLEX-MODE faceplates may be used

to create work area outlets in

furniture raceway panels from .045

inch to .80 inch thick

Product Facts


MT-RJ Outlet Jacks, 110Connect

Jacks or 110Connect Multimedia

Inserts and blanks

:: Includes matching icon wheel

X denotes color: -1=Black, -2=Almond, -4=Gray

110Connect 4 -Port ModulesProduct Facts

:: Printed circuit board assemblies

:: Include 4 jacks

:: Ideal for thin panels

Panel KnockoutDimensions

1.34" - 1.40"

2.66" - 2.75"


1.34" - 1.40"

2.66" - 2.75"


Category 5, T568A 558249-X

Category 5, T568B 558248-X

Category 5e, T568A/T568B 1116580-X


.045" - .080" thick

.045" - .080" thick

2-Port Flush Faceplate

PART NUMBER 558106 -X

3-Port Flush Faceplate


FL

EX

-MO

DE

FA

CE

PL

AT

ES


89

WORK AREA OUTLETS

4-Port SL Series FLEX-MODE Electrical Faceplate


Product Facts



and SL Series Inserts


hidden until used




1.34" - 1.40"

2.66" - 2.75"


1.34" - 1.40"

2.66" - 2.75"

.045" - .080" thick

.045" - .080" thick

Blank Plate


SL Series Furniture Outlet

SMALL OPENING, PART NUMBER 1375005-X

LARGE OPENING, PART NUMBER 1375006-X

Product Facts



and SL Series Inserts

:: Two bases adapt to a wide range of

hole sizes

:: Tabs on base fold over and crimp to

furniture raceway cover


hidden until used


Furniture HoleSize Range

1.375" -

1.405"

2.656" - 2.750"

.045" - .080" thick .045" - .080" thick

Furniture HoleSize Range

1.750" -

1.900"

2.750" - 3.000"


FL

EX

-MO

DE

FA

CE

PL

AT

ES


90

WORK AREA OUTLETS

Flush Faceplate

for Herman Miller Furniture

4 -Port



Product Facts


Jacks, all SL Series Jacks and MT-

RJ Outlet Jacks

:: May require backup plates

depending on furniture style

Standard Faceplatefor Herman Miller Furniture

2-Port


4 -Port




1.80" - 1.92"

2.92" - 3.03"


1.80" - 1.85"

2.85" - 2.95"

.045" - .080" thick

Herman - Miller

.045" - .080" thick

Knoll: .110" thick

Product Facts


Jacks and Inserts, all SL Series

Jacks and

MT-RJ Outlet Jacks

:: Jacks fit flush with front of

faceplate

:: No backup plate required

FL

EX

-MO

DE

AC

CE

SS

OR

IES


91

WORK AREA OUTLETS

Extenders

STANDARD PART NUMBER 558476-X

HERMAN MILLER PART NUMBER 558488-X

KNOLL PART NUMBER 558489-X

Product Facts

:: Use when depth of furniture panel

is limited

:: Raise outlet face approximately 3/4"

above surface of raceway

Product Facts

:: Used to adapt standard

FLEX-MODE Electrical Faceplates to

other holes sizes

Adapters

HERMAN MILLER PART NUMBER 558493-X

KNOLL* PART NUMBER 558492-X


*Used to adapt standard FLEX-MODE Electrical faceplates

to KNOLL furniture manufactured prior to 1992.


Backup Plate


:: Used to adapt Westinghouse

furniture to standard

FLEX-MODE Electrical Kits

Herman Millerand Knoll


1.80" - 1.85"

2.85" - 2.95"

Herman - Miller

.045" - .080" thick

Knoll: .045" thick


1.80" - 1.85"

2.85" - 2.95"

Herman - Miller

.045" - .080" thick

Knoll: .110" thick

StandardPanel Knockout

Dimensions

1.34" - 1.40"

2.66" - 2.75"

.045" - .080" thick

FL

EX

-MO

DE

AC

CE

SS

OR

IES


92

WORK AREA OUTLETS

FLEX-MODE Modular Furniture Faceplate KitBackup Plate


Product Facts

:: Used to adapt Herman Miller Action

Office 2 and Ethospace furniture

manufactured in 1991 or later to

standard FLEX-MODE Electrical kits

Backup Plate


Product Facts

:: Used to adapt Herman Miller Series

3 power opening to standard

FLEX-MODE Electrical kits

Accessory Clip


Product Facts

:: Used with Herman Miller furniture

manufactured prior

to 1991

AC

O S

ING

LE

-PO

RT

INS

TA

LL

AT

ION

KIT

S


93

WORK AREA OUTLETS

Standard ACO Single-Port Installation Kits

RecommendedPanel Cutout

1.312±.010

1.875±.010

.010 R Max.Typical


Unshielded Single-Port Installation Kit110-Style 406360-1

AMP-BARREL 406389-1

Shielded Single-Port Installation Kit110-Style 406361-1

AMP-BARREL 406388-1


Shielded

Product Facts

:: Available in both shielded and unshielded

kits

:: Both 110-Style and AMP-BARREL

terminations provide Category 5e

performance when combined with

Category 5e inserts

:: Single-port module may be snapped into

.040" - .090" thick panel with a minimum

of 1-5/8" clearance behind the panel

:: Optional screw mounting capability is

provided for thicker panels

:: Modular furniture faceplate kit adapts the

single-port module for installation in

standard modular furniture raceway

knockouts

:: Panel mount faceplates are available for

custom applications

:: Unshielded kit includes unshielded insert

housing, edge connector, and shield

clip/strain-relief

:: Shielded kit includes shielded insert

housing, edge connector, rear shield and

shield clip/strain-relief


Single Port Installation Kit 110-StyleUnshielded 1479317-1

Shielded 1479318-1

AMP Communications Outlet (ACO) Installation Kits

Category 6 ACO Single-Port Installation Kits

Product Facts

:: Available in both shielded and

unshielded kits

:: Combines the flexibility and



headroom of AMP

NETCONNECT Category 6

:: Exceed TIA and ISO

requirements for Category 6


requirements

:: Category 6 ACO Installation

Kits are backwardly compatible

with standard ACO Inserts


: Single-port module may be

snapped into .040" - .090" thick

panel with a minimum of 1-5/8"

clearance behind the panel

:: Optional screw mounting

capability is provided for

thicker panels

:: Modular furniture faceplate kit

adapts the single-port module

for installation in standard

modular furniture raceway

knockouts

:: Panel mount faceplates are

available for custom

applications

:: Unshielded kit includes

unshielded insert housing, edge

connector, and shield

clip/strain-relief

:: Shielded kit includes shielded

insert housing, edge connector,

rear shield and shield

clip/strain-relief


1.312±.010

1.875±.010

.010 R Max.Typical

Unshielded

AC

O S

ING

LE

-PO

RT

FA

CE

PL

AT

ES


94

WORK AREA OUTLETS

For Panel Mount


AMP Furniture OutletCOVER KIT AND FRAME, PART NUMBER 557558 -XOPTIONAL BASE, PART NUMBER 557557-X

1.875±.010

1.312±.010

.010 R MaxTypical


X denotes color: -1=Almond, -3=Black, -4=Gray, -5=White

Note: Many furniture panels may not provide the required depth

when optional power systems are installed. If this is a factor,

see AMP Furniture Outlet below.

X denotes color: -1=Almond, -2=Black, -3=Gray

Product Facts

:: This outlet may be used with

undercarpet fitting 555535 and for

custom mount applications

Product Facts

:: Provides a means of mounting a

single-port AMP Communications

Outlet plus an optional Keystone

Jack in most modular furniture

raceways

:: Designed to fit the openings of

most furniture raceway systems

:: Assembled single-port installation

kit extends approximately 3/4-inch

beyond bottom of the frame into the

furniture raceway

:: Optional base available for surface

mounting

:: ACO Inserts on pages 73-81

:: Keystone Jacks on page 95

For Modular Furniture


2.703±.030

1.375±.030

.125 R MaxTypical


X denotes color: -1=Almond, -3=Black

Note: Many furniture panels may not provide the required depth

when optional power systems are installed. If this is a factor,

see AMP Furniture Outlet on page 71.

Product Facts

:: Used to mount single-port module in

a standard modular furniture

raceway knockout

:: Kit includes bezel and faceplate

:: Requires 1-7/16" clearance behind

the raceway

CA

TE

GO

RY

3 K

EY

ST

ON

E J

AC

KS


95

WORK AREA OUTLETS

COMMERCIAL STYLE KITS (BLACK)

Number of Wire Color StufferPairs Range Code Cap Type

Part Number

24-28 — Individual 554171-2

322-26

— Multiple 554171-1

RJ11/14/25 Multiple 556744-1

24-28 — Individual 554578-2


22-26 T568B Multiple 556151-1

T568A Multiple 556166-1

24-28 — Individual 555322-2

4 — Multiple 555322-1

Keyed 22-26 T568B Multiple 556152-1


COMMERCIAL STYLE KITS (ALMOND)

Number of Wire Color StufferPairs Range Code Cap Type

Part Number

3 22-26 — Multiple 554171-4

4 22-26— Multiple 554578-4



4 Keyed 22-26 T568B Multiple 556152-2


Note: All Keystone Jacks are wired one-to-one.

IBM APPROVED STYLE KITS (BLACK)

Number of Wire Color EquivalentPairs Range Code IBM Part Number

Part Number

3 22 AWG RJ11/14/25 8310575 553983-1

4 22 AWG T568B 6091030 554546-1

Category 3 Keystone Jacks Product Facts

:: Specially designed to snap

into faceplates (on page 97) and

panels (on page 133)

:: Insulation-displacement

AMP-BARREL terminals allow

toolless termination of discrete wire

pairs

:: No special tools required

for assembly

:: All Keystone Jacks are wired one-

to-one

:: Compression tool (P/N 1085CT) on

page 193 can be used to apply

AMP-BARREL Stuffer Caps

Conductor Type:

Solid or stranded having

.048 max. insulation O.D.

.760

.587

Designed to fit opening

CA

TE

GO

RY

3 K

EY

ST

ON

E M

OD

CO

UP

LE

RS


96

WORK AREA OUTLETS

Category 3 Modular CouplersIn-Line Couplers Product Facts

:: Compact couplers for two modular

plugs

:: Couplers snap into 0.585"

x 0.765" rectangular

faceplate cutouts

:: Faceplates on page 97

:: Wired one-to-one

Product Facts

:: Compact couplers for two modular

plugs

:: Couplers snap into 0.585"

x 0.765" rectangular

faceplate cutouts

:: Faceplates on page 97

:: Wired one-to-one

Number of Positions Part Number

6 555050-1

8 555052-1

8 (Keyed) 555376-1

6 (MMJ/MMJ) 556625-1

6 (MMJ/STD) 556627-1

Right-Angle Couplers

Number of Positions Part Number

6 555049-1

8 555051-1

8 (Keyed) 555377-1

WO

RK

AR

EA

OU

TL

ET

S


97

WORK AREA OUTLETS

E

Product Facts

:: Faceplates fit standard electrical J

boxes

:: Available in brushed stainless steel

or plastic (almond color)

:: Pressure-sensitive label, with user-

friendly symbols to easily identify

voice and/or data cutouts, is

furnished with each stainless steel

faceplate

:: Plastic faceplates have either

molded designations or are supplied

with pressure-sensitive labels

:: These faceplates accept Keystone

Jacks and modular couplers on

pages 95 and 96

Faceplates for Keystone Jacksand Modular Couplers

DA

Double Gang

B C

F

DATA

VOICE

DATA

VOICE

DATA

VOICE

Note: They do not accept 110Connect Modular Jacks.

Faceplate Part NumberFigure

Cutouts Stainless Steel Plastic

ATwo Mod. Jacks

— 556029-3(Voice/Data)

A* Two Mod. Jacks 555384-2 556029-9

BOne BNC and One

— 556029-4Mod. Jack (Voice/Data)

COne Mod. Jack

1-555384-0 556029-7(Voice/Data)

D Blank — 556029-1

EThree Mod. Jacks —

556029-6(Voice/Data)

FFour Mod. Jacks —

556029-8(Voice/Data)

DoubleFour Mod. Jacks 555386-1 556030-2

Gang

Note: Wallplates furnished with stainless steel, slotted, oval head screws (6-32 x 0.625").

*Same as A but without “Data/Voice” markings.

WO

RK

AR

EA

OU

TL

ET

S


98

WORK AREA OUTLETS

OP

EN

OF

FIC

E/Z

ON

E C

AB

LIN

G


99

OPEN OFFICE/ZONE CABLING

Open Office SystemsConsolidation Points and Accessories .........................................100-107

Active Wall Mount Enclosures ............................................................100

Consolidation Points for Drop Ceilings....................................100-101

Consolidation Points for Raised Floors....................................102-103

Modular Consolidation Points and Accessories...................104-105

Modular Consolidation Points .......................................................104

6-Port Modular Jack Modules .......................................................104

12-Fiber MT-RJ Jack Module.........................................................104

12-Fiber SC/SC Duplex Module...................................................105

12-Fiber SC/ST-Style Duplex Module ........................................105

12-Fiber ST-Style/ST-Style Duplex Module ..............................105

Cross-Connect Consolidation Point and Accessories ..................106

Cross-Connect Wiring Blocks ........................................................106

Cross-Connect Connecting Blocks...............................................106

Transition Cable Assemblies................................................................107

Multi-User Outlets and Accessories ..............................................108-110

Mini Multi-User Outlet ............................................................................108

Category 5e Multi-User Outlet.............................................................108

Fiber Optic Multi-User Outlet ...............................................................108

MT-RJ Jack Module ................................................................................109

SL Series Discrete Module....................................................................109

Duplex SC/SC Module...........................................................................109

Duplex ST-Style/SC Module ................................................................109

Duplex ST-Style/Duplex ST-Style Module.......................................109

Chapter Summary

:: Zone cabling helps realize

long-term cost benefits on moves,

adds and changes

:: Fully compliant with

TIA/EIA-568-B.1

:: Category 5e, Category 6

and fiber performance

:: Performance of all

AMP NETCONNECT systems

confirmed in Zone Cabling

applications

:: Factory-terminated and tested

transition cable assemblies

:: The AMPINNERGY Modular Power

Distribution System can be used to

deliver modular power to the

Access Floor Workstation

Modules. Request catalog

#1654963

:: The AMP NETCONNECT

Undercarpet Cabling System can

be used to provide power and

communications

under carpet squares.

Request catalog #1654963

4

WA

LL

MO

UN

T A

ND

CO

NS

OL

IDA

TIO

N P

OIN

TS


100


Product Facts

:: Designed for use in 2 ft x 2 ft ceiling

tile grid systems

:: Accommodates a total of 5U

(2U+1U+2U) of standard

19-inch patch panels and/or cable

management panels

:: Complies with NEC 300-22 (c)

requirements for use in environmental

air spaces

:: Allows moves, adds and changes

without re-terminating and re-testing

cable

:: Forms an interconnect between work

area cabling and horizontal feeder

cables

:: Complies with TIA/EIA-568-B and ISO

11801 requirements

Capacity Part Number

5U (2U+1U+2U) total 1479040-1

Consolidation Points for Drop Ceilings

Passive Patch Panel Consolidation Point

Active Wall Mount Enclosure


Active Wall Mount Enclosures, Unloaded 1479382-1

Product Facts

:: Integrated bracket will hold one Snap-

in Adapter Plate for termination of

backbone fiber

:: Holds 3U of electronics and two 48

port patch panels.

:: Hinged Patch Panel Mounts allow easy

access to patch panels for moves adds

and changes

:: Integrated fan for air displacement and

insulated doors to block active

electronics noise

:: Lockable front door for security

Vent

Fan

Hinged Patch Mounts

InstalledPosition

Forward orOpen Position

Open

Closed

CO

NS

OL

IDA

TIO

N P

OIN

TS


101


Product Facts


tile grid systems

:: Accommodates up to two

300-pair 110Connect XC

Wiring Blocks



air spaces



cable



cables


11801 requirements

Passive 110Connect XC Consolidation Point


Two 300-pair 110Connect XC Wiring Blocks 1479041-1

Product Facts


tile grid systems

:: Accommodates 2U of active LAN

equipment such as switches and hubs

measuring up to 15.5-inch deep

:: A total of 5U (2U+1U+2U)

of standard 19-inch patch panels

and/or cable management panels



air spaces



cable



cables


11801 requirements


5U (2U+1U+2U) total for Passive1479039-1

2U (2U) total for Active Equipment

Active Equipment Consolidation Point

CO

NS

OL

IDA

TIO

N P

OIN

TS


102


Product Facts

:: Designed for use in 2 ft x 2 ft raised

floor systems

:: Accommodates a total of 4U (2U+2U)

of standard 19-inch patch panels and/or

cablemanagementpanels



air spaces

: Allows moves, adds and changes


cable



cables


11801 requirements



and changes (see page 103 for

example)

Consolidation Point for 6-Inch HighRaised Floor Systems


4U (2U+2U) total 1479042-1

Consolidation Points for Raised Floor Systems

Consolidation Point for 2.5-Inch High Raised Floor SystemsPART NUMBER 1479158-1

Product Facts

:: Designed to fit low profile raised floors

:: Accommodates a total of 2U (1U + 1U)

of standard 19-inch patch panels

Consolidation Point for 7-Inch High Raised Floor Systems


8U (4U+4U) Total 1479359-1

Product Facts


of standard 19-inch

patch panels

:: Accommodates a 2U cable management

panel in bottom of enclosure for routing

of patch cords and cables



and changes (see page 103 for example)

CO

NS

OL

IDA

TIO

N P

OIN

TS


103


Consolidation Point for 10-Inch High RaisedFloor Systems


12U (6U+6U) Total 1479360-1

Product Facts

:: Accommodates a total of 12U (6U +

6U) of standard 19-inch patch panels

:: Accommodates a 2U cable

management panel in bottom of

enclosure for routing of patch cords

and cables

:: Intended for high density applications

in data centers, server rooms, etc.

:: Hinged Patch Panel Mounts allow

easy access to patch panels for

moves adds and changes (see part

number 1479297 for example)


8U (4U+4U) Total 1479297-1

Note: Includes locking lid

Security Drop-in Consolidation Point for 8-Inch High Raised Floor Systems

Installed

Product Facts

:: Lockable lid for security included

:: Designed for use in 2 ft x 2 ft raised

floor systems


of standard 19-inch patch or cable

management panels



air spaces


without re-terminating and retesting

cable



cables


11801 requirements



and changes

ForwardPosition

CO

NS

OL

IDA

TIO

N P

OIN

TS

AN

D M

OD

UL

ES


104


Product Facts

:: Allow moves, adds and

changes without re-terminating and

retesting cable

:: Form an interconnect between

work area cabling and horizontal

feeder cables

:: 36-port consolidation point has two

mounting brackets (one front - as in the

24-port - and one in back). Three

modules mount in each bracket

allowing cables to be run in unused

module spaces

:: Comply with TIA/EIA-568-B

and ISO 11801 requirements

:: 24-Port accommodates four connector

modules, 36-port accommodates six

:: Comply with NEC 300-22 (c)


air spaces

:: Compliant with UL 2043 for use in


:: UL listed: file number E81956

Product Facts

:: Comply with TIA/EIA-568-B


:: SL Series Discrete Module accepts up

to six SL Series Jacks, MT-RJ Jacks or

SL Series Inserts and allows for

custom configurations

:: SL Series Modules feature individually

replaceable ports

6-Port Modular Jack Modules

12-Fiber MT-RJ ModulePART NUMBER 1375093-1 Product Facts

:: Holds up to six MT-RJ Patch Panel

Jacks (on page 103); purchased

separately

:: Complies with TIA/EIA-568-B


24-Port

Modular Consolidation PointsFor Drop Ceilings and Raised Floors24-PORT, PART NUMBER 406771-136-PORT, PART NUMBER 1116741-1


Category 6 SL Series 1375367-1

Category 5e 110Connect 406772-1

Discrete SL Series 1479696-1

DU

PL

EX

MO

DU

LE

S


105


Product Facts


:: Complies with TIA/EIA-568-B



connectors

12-Fiber ST-Style to ST-Style Duplex ModulePART NUMBER 406790-1

12-Fiber SC to ST-Style Duplex ModulePART NUMBER 406789-1

12-Fiber SC to SC Duplex ModulePART NUMBER 406788-1

Product Facts


:: Complies with TIA/EIA-568-B and

ISO 11801 requirements

:: Couples ST-Style connectors

Product Facts






Front Back

11

0C

ON

NE

CT

XC

CO

NS

OL

IDA

TIO

N P

OIN

T


106


Product Facts


without re-terminating and

retesting cable

:: Forms an interconnect between

work area cabling and horizontal

feeder cables



:: Accommodates two 100-Pair

6- 610XC or 110Connect XC Wiring

Blocks




:: Compliant with UL 2043 for use in


:: UL listed: file number E81956

Product Facts

:: Connecting blocks utilize double-ended

insulation displacement contacts (IDC)

that terminate 22-26 AWG solid or

stranded conductors with a maximum

O.D. of .063 inches

:: Available in 4- and 5-pair sizes with the

appropriate color-coding

:: See page 148 - 154 for more

information and other 6-110XC and

110Connect XC Cross-Connect

Products

Product Facts

:: Wiring blocks accept 22-26 AWG

conductors

:: 100-Pair block without mounting legs

to be used with Consolidation Point

:: Labels available on page 193

:: See page 148 - 154 for more

information and other 6-110XC and

110Connect XC Cross-Connect

Products

Cross-Connect Consolidation PointFor Drop Ceilings and Raised FloorsPART NUMBER 406771-2

Cross-Connect Connecting Blocks


4-PairCategory 5e 558401-1

Category 6 1479245-1

5-PairCategory 5e 558402-1

Category 6 1479246-1

Cross-Connect Wiring Blocks


610XC Wiring Block, without legs Category 6 1479251-1

110Connect XC Wiring Block, without legs Category 5e 558840-1

CO

NS

OL

IDA

TIO

N P

OIN

T C

AB

LE

AS

SE

MB

LIE

S


107


Product Facts

:: Form connections between work area

and consolidation point

:: Factory-assembled and tested

:: Save time and money on moves,

adds and changes

Consolidation Point

Transition Cable Assemblies

MT-RJ Plug to MT-RJ Right Angle Jack


50/125µm Multimode OFNR (Riser) 1457240-X

62.5/125µm Multimode OFNR (Riser) 1457241-X

X denotes length in feet: -1 = 10, -2= 20, -3 = 30, -4 = 40, -5 = 50

Category 6 Modular Plug to SL Series110Connect JackDescription Wiring Pattern Part Number

PVC T568A 219596-X

PVC T568B 219597-X

Plenum T568A 219598-X

Plenum T568B 219599-X

X denotes length in feet: -3 = 40, -4 = 50

Category 5e Modular Plug to SL Series110Connect JackDescription Wiring Pattern Part Number

PVC T568A 219172-X

PVC T568B 219173-X

Plenum T568A 219174-X

Plenum T568B 219175-X

X denotes length in feet: -1 = 20, -2 = 30, -3 = 40, -4 = 50

MU

LT

I-US

ER

OU

TL

ET

S


108


Product Facts

:: Provides a 6-port outlet particularly

suited to open office or laboratory

environments

:: May be used free-hanging or mounted

:: Available in Category 5e and Category

6 performance

:: Meets all TIA and ISO performance

requirements

:: Universal wiring – one part number

may be terminated to T568A or T568B

:: Suitable for use with either

4-pair or 25-pair cable

:: Kits include housing, connector module

and heat shrink tubing

:: Replacement labels and clear label

covers are available on page 191

Product Facts

:: Attaches to columns, walls or

permanent furniture structures

:: Connects directly to user

communications equipment

:: Accommodates surface raceway

:: Applications notes on page 273

:: Accepts two fiber optic modules shown

on page 109

:: Cables exit flush to mounting surface

Fiber Optic Multi-User Outlet (MUO)PART NUMBER 406817-1

Mini Multi-User Outlet (MUO)

Product Facts

:: Attaches to columns, walls or

permanent furniture structures

:: Connects directly to user

communications equipment

:: Accommodates surface raceway

:: Applications notes on page 273

:: 24-port, Category 5e, 110Connect

Jacks with angled cable exit

Category 5e Multi-User Outlet (MUO)PART NUMBER 406810-1


Category 5e, 6-Port Mini MUO 1479144-1

Category 6, 6-Port Mini MUO 1375376-1

MO

DU

LE

S


109


12-Fiber SC to ST-Style DuplexFiber Optic ModulePART NUMBER 406819-1

12-Fiber ST-Style to ST-Style Duplex Fiber Optic ModulePART NUMBER 406820-1

Front Back

Product Facts




Product Facts


:: Couples ST-Style connectors

MT-RJ Jack ModulePART NUMBER 1375347-1

Product Facts

:: Holds up to six MT-RJ Patch Panel

Jacks (sold separately) on

page 103

12-Fiber SC to SC Duplex Fiber Optic ModulePART NUMBER 406818-1 Product Facts



connectors

SL Series Discrete ModulePART NUMBER 1479204-1

Product Facts

:: Accepts up to six SL Series Jacks, MT-

RJ Jacks or SL Series Inserts for


:: For use with Fiber Optic MUO

OP

EN

OF

FIC

E/Z

ON

E C

AB

LIN

G


110


TE

LE

CO

MM

UN

ICA

TIO

NS

RO

OM


111

TELECOMMUNICATIONS ROOM

Telecommunications RoomFiber Optic Products.......................................................112-127

SAN and Data Center Products............................112-121

Unloaded Rack Mount Enclosures......................114-118

Unloaded Wall Mount Enclosures.......................119-121

Snap-in Adapter Plates and Accessories ..........122-125

Loaded Rack Mount Enclosures ..........................125-126

Loaded Wall Mount Enclosures ....................................127

Twisted Pair Patch Panel Products............................128-141

Category 6 SL Series Patch Panels.....................128-129

Category 5E SL Series Patch Panels............................129

Category 5e 110Connect Patch Panels............130-131

Category 5 Patch Panels..................................................132

Category 3 Patch Panels ........................................133-134

SL Series Discrete Patch Panels ..........................135-136

110Connect Discrete Patch Panels .............................137

AMP Communications Outlet Products ............138-141

Patch Panel and Rack Accessories............................142-143

Rack Mount Cable Management Products ............144-147

Twisted Pair Cross-Connect Products ......................148-154

6-110XC Category 6 Cross-Connect Products148-150

110Connect XC Cross-Connect Products........151-154

Cable Management Accessories ...............................155-156

Velcro™ Cable Ties............................................................155

AMP-TY Nylon Cable Ties................................................155

Split Loom ............................................................................156

SPIRAP ..................................................................................156

Chapter Summary

:: Modular designs for maximum

flexibility

:: Rack and wall mount products

:: High densities for fiber and

copper

:: Loaded and unloaded versions

available

5

Ch05-TelecommunicationsRoom_3-04.qxd 3/22/2004 1:52 PM

MP

O C

AS

SE

TT

ES


112


SAN and Data Center ProductsProduct Facts

:: Fiber wiring pattern is pair-flipped

(AB/BA)

:: Also available in straight-through

(AB/AB) configuration

:: Simple and flexible fiber cabling

system for premise, SAN and Data

Center application

:: All cassettes have MPO trunk

connections on back

:: Fit all AMP NETCONNECT

enclosures that accept snap-in

adapter plates

:: Easy installation, moves, adds and

changes

Description Fiber Count Duplex Port Count Part Number

50/125µm Multimode 12 6 1435066-2

24 12 1435581-2

XG (850nm LO 50/125µm) Multimode 24 12 1588720-1

12 6 1435005-262.5/125µm Multimode

24 12 1435006-2

Singlemode12 6 1435065-2

24 12 1435466-2

Note: For MPO Cable Assemblies, see page 113.

SC


50/125µm Multimode 12 6 1435181-2

62.5/125µm Multimode 12 6 1435180-2

Singlemode 12 6 1435069-2


MPO Fiber Optic Cassettes

MT-RJ

MT-RJ SECURE™


50/125µm Multimode12 6 1754286-X

24 12 1754288-X

62.5/125µm Multimode12 6 1754285-X

24 12 1754287-X

X denotes: -1 = Standard, -2=Red, -3=Green, -4=Blue, -5=Yellow

Note: For use with MT-RJ Secure System MPO Cable Assemblies on page 114 only.

ST-Style


50/125µm Multimode 12 6 1435067-2

62.5/125µm Multimode 12 6 1278418-2



MP

O C

AS

SE

TT

ES

& C

AB

LE

AS

SE

MB

LIE

S


113



50/125µm Multimode12 6 1435429-2

24 12 1435435-2

62.5/125µm Multimode12 6 1435430-2

24 12 1435436-2

Singlemode12 6 1435431-2

24 12 1435437-2

Note: For MPO Cable Assemblies, see below.

MPO to MPO Trunk Cable AssembliesProduct Facts

:: 12-Fibers per MPO connector

:: Pulling socks protect connectors

during installation

:: Available in 50µm, XG and 62.5µm

Multimode and Singlemode as listed

Description UL/NEC Ratings Part Number

50/125µm MultimodePlenum (OFNP) 1435028-X

Riser (OFNR) 1435036-X

XG (850nm LO 50/125µm) Multimode Plenum (OFNP) 1693087-X

12-Fiber, Pair-Flipped (AB/BA)62.5/125µm Multimode

Plenum (OFNP) 1435024-X


SinglemodePlenum (OFNP) 1435070-X




24-Fiber, Pair-Flipped (AB/BA) XG (850nm LO 50/125µm) Multimode Plenum (OFNP) 1588724-X

62.5/125µm MultimodePlenum (OFNP) 1435025-X

Riser (OFNR) 1435033--X


72-Fiber, Pair-Flipped (AB/BA)Riser (OFNR) 1435039-X

62.5/125µm MultimodePlenum (OFNP) 1435027-X

Riser (OFNR) 1435035--X

X denotes length in feet: -1 = 10, -2 = 20, -3 = 30, -4 = 40, -5 = 50, -6 = 60, -7 = 70, -8 = 80, -9 = 90, 1--0 = 100, 1--1 = 110, 1--2 = 120, 1--3 = 130, 1--4

= 140, 1--5 = 150, 1--6 = 160, 1--7 = 170, 1--8 = 180, 1--9 = 190, 2--0 = 200, 2--1 = 210, 2--2 = 220, 2--3 = 230, 2--4 = 240, 2--5 =

250, 2--6 = 260, 2--7 = 270, 2--8 = 280, 2--9 = 290, 3--0 = 300

Pulling Socks

Product Facts

:: Fiber wiring pattern is pair-flipped

(AB/BA)

:: Also available in straight-through

(AB/AB) configuration

:: Simple and flexible fiber cabling

system for premise, SAN and Data

Center application

:: All cassettes have MPO trunk

connections on back

:: Fit all AMP NETCONNECT enclosures

that accept snap-in adapter plates

:: Easy installation, moves, adds and

changes

MPO Fiber Optic Cassettes

LC


MP

O A

SS

EM

BL

IES

AN

D F

IBE

R E

NC

LO

SU

RE

S


114


MT-RJ SECURE System MPO to MPO Trunk Cable Assemblies

Description UL/NEC RatingsSecure

Part NumberColor/Keying

Plenum (OFNP) Red 1754273-X

50/125µm MultimodePlenum (OFNP) Yellow 1754276-X

Plenum (OFNP) Green 1754274-X

Plenum (OFNP) Blue 1754275-X


12-Fiber XG (850nm LO 50/125µm) MultimodePlenum (OFNP) Yellow 1754421-X




62.5/125µm MultimodePlenum (OFNP) Yellow 1754272-X




50/125µm MultimodePlenum (OFNP) Yellow 1754284-X




24-Fiber XG (850nm LO 50/125µm) MultimodePlenum (OFNP) Yellow 1754425-X




62.5/125µm MultimodePlenum (OFNP) Yellow 1754280-X


Plenum (OFNP) Blue 1754279--X

X denotes length in feet: -1 = 10, -2 = 20, -3 = 30, -4 = 40, -5 = 50, -6 = 60, -7 = 70, -8 = 80, -9 = 90,

1- -0 = 100, 1- -1 = 110, 1- -2= 120, 1- -3 = 130, 1- -4 = 140, 1- -5 = 150, 1- -6 = 160, 1- -7 = 170, 1- -8 = 180,

1- -9 = 190, 2- -0 = 200, 2- -1 = 210,2- -2 = 220, 2- -3 = 230, 2- -4 = 240, 2- -5 = 250, 2- -6 = 260, 2- -7 = 270,

2- -8 = 280, 2- -9 = 290, 3- -0 = 300

Note: For use with MT-RJ Secure System MPO Cassettes on page 112 only.

Product Facts

:: Accept 3 snap-in adapter plates or

MPO Cassettes

:: Slide and tilt drawer

:: Quick release front panel

:: Forward, flush or recessed mounting

:: Fit standard TIA 19-inch racks

:: Include fiber management rings

:: Armored and Multiple Trunk Cable

RMPE:

··· Specially designed to hold armored

or multiple trunk cables in place

with no slippage

··· Large rear cable entry features tie

down brackets that can be

mounted inside or outside of RMPE

:: Standard Cable RMPE:

··· Cable strain relief and management

rings included

Fiber Densities

Fiber Duplex PortInsert Type

Density (max) Density (max)

6-Fiber Adapter Plates 18 9

12-Fiber Adapter Plates or MPO Cassettes 36 18


Fiber Optic Enclosures, Unloaded

Rack Mount Patch Enclosures (RMPE)

1U (1.75-inch) RMPE


Standard Cables 1348876-4

Armored and Multiple Trunk Cables 1435555-1

Product Facts

:: For use with MT-RJ

Secure System MPO

Cassettes on

page 112 only

:: Feature colored/keyed

MPO connectors which

only mate with like

colored MPO couplers

to limit access to secure

networks

:: 12-Fibers per MPO

connector

:: Pulling socks protect

connectors during

installation

:: Available in 50µm, XG

and 62.5µm Multimode

as listed


UN

LO

AD

ED

, FIB

ER

EN

CL

OS

UR

ES


115


Swappable front

panel enclosure

1U (1.75-inch), RMPE with SwappableFront Panel and Accessories

Category 5e 110Connect

5-pack module

Product Facts

:: 1U Drawer-Style Rack Mount

Enclosure features:

··· Comes with one Snap-In Adapter

Plate (Standard) Front Panel and one

Slim Line Front Panel

··· Slim Line Front Panel allows the end

user the ability to customize this box

with both Cat5e and Fiber ports as

needed

··· Slide and tilt drawer

··· Quick Release front panel

··· Forward, flush or recessed mounting

:: Snap-In Adapter Front Panel accepts 3

Snap-In Adapter Plates or 3 MPO

Cassettes

:: The Slim Line Front Panel accepts up to

4 of either Category 5e 110Connect 6-

Pack Modules or Duplex SC Adapter

Plate Modules

:: The Category 5e 110Connect 6-Pack

Modules meet or exceed TIA and ISO

Category 5e component requirements

:: SC Adapter Plate Module Kits are

suitable for use with Multimode

connectors


Swappable Front Panel Enclosure 1435040-1

Category 5e 110Connect 6-Pack Module Kit1375368-1

for SlimLine Front Panel

SC Adapter Plate Module Kit, 3 Duplex SC

(6-Fiber), Slim Line Front Panel1435172-1

Fiber Densities






SC Adapter Plates Module Kit 24 12

2U (3.50-inch) RMPE Product Facts

:: Accept 4 snap-in adapter plates or MPO

Cassettes

:: Removable front and rear covers for

easy access and installation

:: Front and rear cable management rings

:: Edge guard on front cable entries for

cable assembly protection


:: Fit standard 19" and 23" racks

:: Armored and Multiple Trunk Cable

RMPE:

··· Specially designed to hold armored

or multiple trunk cables in place with

no slippage

··· Large side or rear cable entry

features tie down brackets that can

be mounted inside or outside of

RMPE


··· Cable strain relief and management

rings included

··· Shown loaded with 6-fiber duplex SC

adapter plates (not included)

Fiber Densities

Fiber Duplex Port

Insert Type Density Density

(max) (max)







SC Adapter Plate

Module


UN

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES


116


Product Facts

:: Accept 8 snap-in adapter plates or MPOCassettes

:: Removable front and rear covers foreasy access and installation


:: Edge guard on front cable entries forcable assembly protection



:: Armored and Multiple Trunk CableRMPE:

··· Specially designed to hold armoredor multiple trunk cables in place withno slippage

··· Large side or rear cable entryfeatures tie down brackets that canbe mounted inside or outside ofRMPE


··· Cable strain relief and managementrings included

··· Shown loaded with 12-fiber MT-RJadapter plates (not included)

:: 3U Security Kit for 559614-2:

··· Used to retrofit 3U RMPEs for addedSecurity

··· Kits include 2 locks and 1 aluminumfront door (black)

3U (5.25-inch) RMPE and Accessories

Product Facts

:: Accept 12 snap-in adapter plates or MPOCassettes

:: Removable front and rear covers for easyaccess and installation





:: Armored and Multiple Trunk CableRMPE:

··· Specially designed to hold armored ormultiple trunk cables in place with noslippage

··· Large side or rear cable entry featurestie down brackets that can bemounted inside or outside of RMPE


··· Cable strain relief and managementrings included

··· Shown loaded with 6-fiber ST-Styleadapter plates (not included)

:: 4U Security Kit for 559552-2:

··· Used to retrofit 4U RMPEs for addedSecurity

··· Kits include 2 locks and 1 aluminumfront door (black)

4U (7.00-inch) RMPE and Accessories

Fiber Densities









3U Security Kit 1435187-2

Fiber Densities









4U Security Kit 1435161-2

Back

Standard

Front


UN

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES


117


Product Facts

:: Splice tray holders are located in front

of unit allowing cable storage in rear

:: Each splice tray holder accepts two

splice trays

:: Removable rear and clear front covers

for easy access and installation

:: Edge guard on front cable entries for

cable assembly protection

:: Fit standard 19" racks 223”

:: Uses 1435839 Splice Trays (see

page 118) and 559433 (see page 121)

Rack Mount Splice Enclosures (RMSE)

3U (5.25-inch) and 4U (7.00-inch) RMSE

Fiber Density/Splice Tray Capacity

Fiber Splice TrayInsert Type

Count (max) Holder Capacity(splice trays)

3U Fiber Density 72 6

4U Fiber Density 288 144


3U RMSE 3 Splice Tray Holders 559089-2

4U RMSE 4 Splice Tray Holders 559165-2

Product Facts

:: Accepts 3 snap-in adapter plates orMPO Cassettes and installation

:: Uses 559433Splice Trays (see page121)

:: Accepts 6 splice trays

:: Removable front and rear covers foreasy access and installation





:: Specially designed to hold armored ormultiple trunk cables in place with noslippage

:: Large side or rear cable entry featurestie down brackets that can be mountedinside or outside of RMSE

:: A splicing shelf is located over adapterplates

:: Designed as a drawer for easy access

Rack Mount Splice & Patch Enclosures2U (3.50-inch) RMSPEPART NUMBER 1435652-1

Fiber Density/Splice Tray Capacity

Insert TypeFiber Count Splice Tray Holder

(max) Capacity (splice trays)




Spliced Fiber Capacity 72 -

Splice Tray Holder Capacity 6 -

Back, Open

Front, Open with Tray

Extended


UN

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES

AN

D A

CC

ES

SO

RIE

S


118


Rack Mount Fiber Management Enclosures (RMFME)

and Accessories

PART NUMBER 1435808-1 Product Facts

:: Stores excess length of fiber patch

cable assemblies or fiber loops

Product Facts

:: Hold up to 12 splices each

:: Used with 2U, 3U and 4U RMSEs

:: Accommodates both through (in-line)

and end (butt) splice configurations

:: Black anodized aluminum construction

for durability and improved fiber

visibility

:: Each splice tray includes clear plastic

cover, end caps for fiber retention, and

splice holders as listed

:: Splice and Fiber Holders are also

available separately

Splice Trays and Accessories for 2U, 3U and 4U RMSEs

Splice Trays with Splice Holders

Description Included Splice Holder Figure Part Number

Fusion with sleeve & Elastomeric A 1435839-1

Splice TrayCORELINK B 1435839-2

Universal C 1435839-3

Mechanical D 1435839-4

Splice and Fiber Holders


Fusion with sleeve & Elastomeric E 503085-1

Splice Holder Fusion F 503086-1

CORELINK G 559066-1

Fiber Holder - H 559532-1

A

CD

B

End Cap Discrete Cap

1.50 .05

[38.11.27]

.200

[5.1]

.04

[1.02]

2.4 [70]

E

F

GH

Front, Extended


UN

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES


119


Wall Mount Enclosure (WMPE)

Single Sided, Single Door WMPE Product Facts

:: Accepts 2 snap-in adapter plates or

MPO Cassettes

:: Top and bottom cable entries

feature rubber cable grommets

:: Reversible cable strain relief

bracket

:: Internal cable management

:: Loop storage for distribution cables

:: Recessed, easy-to-use door latches

:: Dimensions (for exact dimensions

consult customer drawing):

8" (20cm) H x 4" (10cm) D x

8" (20cm) W

Double Sided, Double Door WMPE

Product Facts

:: Accepts Snap-In Adapter plates or

MPO Cassettes

:: Top and bottom cable entries

feature rubber cable grommets

:: Reversible cable strain relief bracket

:: Designed for intrabuilding or

campus backbone applications

:: Internal cable management

:: Loop storage for distribution cables


:: WMPE “A” Dimensions (for exact

dimensions consult customer

drawing):

8" (20cm) H x 4" (10cm) D x

15" (38cm) W

:: WMPE “B” Dimensions (for exact

dimensions consult customer

drawing):

15" (38cm) H x 4" (10cm) D x

13.5" (34cm) W


Double Adapter Plate WMPE 1278323-2

Optional Lock 559501-2

Optional Cable Gromets 559496-2

Fiber Densities






DescriptionAdapter Plate Part

Capacity Figure Number

Two Adapter Plate WMPE 2 A 559560-2

Four Adapter Plate WMPE4 B 559561-2

with Lock & Flat Tie Holders 4 B 559561-3


Optional Cable Gromets 559496-2

Fiber Densities

Insert TypeTwo Adapter Plate Four Adapter Plate

Fiber Duplex Port Fiber Duplex PortCount (max) Density (max) Count (max) Density (max)

6-Fiber Adapter Plates 12 6 24 12

12-Fiber Adapter Plates or MPO Cassettes 24 12 48 24

24-Fiber Adapter Plates or MPO Cassettes 48 24 96 48

A B


UN

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES


120


Product Facts


MPO Cassettes

:: Top and bottom, left and right side

cable entries feature plastic cable

grommets

:: Integral hasp for use with off-the-

shelf padlocks

:: Designed for intrabuilding or campus

backbone applications



12" (30.5cm) H x 3" (7.6cm) D x

12" (30.5cm) W

Wall Mount Enclosure (WMPE)

Double Sided, Single Door WMPEPART NUMBER 1435128-1

Fiber Densities

Insert TypeFiber Duplex Port


ST-Style Adapter Plate, 6-Fiber 24 12

MT-RJ to MPO Cassette, 12-Fiber 48 24

MT-RJ to MPO Cassette, 24-Fiber 96 48


UN

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES

& A

CC

ES

SO

RIE

S


121


Splice Accessories for WMSE

Product Facts

:: Splice Tray Holder:

··· Accepts up to four splice trays

··· Used with 1278755

:: Splice Trays:

··· Hold up to 12 splices each

··· Used with 559433

:: Black anodized aluminum

construction for durability and

improved fiber visibility

:: Each splice tray includes clear

plastic cover, end caps for fiber

retention, and splice holders as

listed

Fusion Splice TraySplice Tray Holder

Elastomeric Splice Tray Corelink Splice Tray

Splice and Fiber Holders

Description Included Splice Holder Part Number

Splice Tray Holder 1374526-1

Fusion 559433-2

Splice Tray Elastomeric & Fusion with Sleeve 559433-3

CORELINK 559433-4

Wall Mount Splice Enclosure (WMSE) and Accessories

Double Sided, Double Door WMSE


1278755-1

With Cable Grommets andSix Adapter Plate WMSE Cable Glands

1278755-3

With Grommets, Cable Glands andSplice Tray Holder (1374526)

1278755-4


Optional Cable Grommets 559496-2

Product Facts


MPO Cassettes

:: Designed for intrabuilding or

campus backbone applications

:: Reversible cable strain relief

bracket


:: Uses 1374526 splice holder and

559433 splice trays below



16.5" (40cm) H x 14" (35.5cm) D x

5" (13cm) W

Fiber Densities/Splice Tray Capacity

Insert TypeFiber Count Duplex Port

(max) Density (max)




Spliced Fiber Capacity 72 -

Splice Tray Holder Capacity (splice trays) 6 -


MT

-RJ

JA

CK

S A

ND

SN

AP

-IN A

DA

PT

ER

PL

AT

ES


122


MT-RJ Patch Panel Jacks

Description ColorPart Number

900µm 250µm

50/125um Multimode Black 1588880-1 1278303-1

XG (850nm LO 50/125um) Multimode Grey 1588880-3 1278303-4

62.5/125um Multimode Beige 1588880-2 1278303-2

MT-RJ SECURE Patch Panel Jacks

DescriptionPart Number

900µm 250µm

50/125µm Multimode 1588879-X 1278807-X

XG (850nm LO 50/125µm) Multimode 1693949-X 1693951-X

62.5/125µm Multimode 1588878-X 1278808-X

X denotes jack color: -1=Red, -2=Yellow, -3=Green, -4=Blue

50/125µm Multimode for 900µm

Buffered Fibers

50/125µm Multimode for 250µm

Coated Fibers

MT-RJ Patch Panel Jacks and Snap-in Adapter Plates

MT-RJ Snap-in Adapter Plates

Description Capacity Package Quantity Part Number

12-Fiber 6 Duplex MT-RJ Jacks 1 1278328-3

24-Fiber 12 Duplex MT-RJ Couplers (for MT-RJ Plugs) 1 1435440-1

MT-RJ Jack Adapter Plate MT-RJ Plug Adapter Plate

Product Facts



:: Half the size of SC Duplex and ST-Style connectors


:: Tunable


:: Jack version eliminates the needfor a separate coupler

:: Bend Limiting boots available onpage 123

:: MT-RJ Patch Panel Jack packagesinclude:

··· 6 - MT-RJ Jacks

··· 2 - Actuator tools

··· 1 - Fiber guide

··· 1 - Icon wheel

Product Facts

:: MT-RJ Jack Adapter Plates hold up

to six (standard or Secure) MT-RJ

Jacks or Pigtail Jack Cable

Assemblies

:: MT-RJ Plug Adapter Plates hold up to

twelve (standard only) MT-RJ Plugs

or Pigtail Plug Cable Assemblies

:: Fit AMP NETCONNECT Fiber Optic

Enclosures included in

this catalog


Product Facts

:: In addition to Standard MT-RJPatch Panel Jack features, MT-RJSECURE System Patch Panel Jacks

··· Feature color-coded,mechanically keyed jacks whichmate only with like colored plugsto limit access to securenetworks

··· MT-RJ SECURE patch cords onpages 158-159

:: MT-RJ SECURE Patch Panel Jackpackages include:

··· 6 - MT-RJ SECURE Jacks

··· 2 - Actuator tools

··· 1 - Fiber guide

··· 1 - Icon wheel


MT

-RJ

AC

CE

SS

OR

IES

AN

D P

IGT

AIL

AS

SE

MB

LIE

S


123


MT- RJ Pigtail Jack Assemblies

Product Facts

:: Compatible with MT-RJ Jack Snap-In

Adapter Plates and Enclosures

:: Spliceable pigtail assembly

:: 250µm fiber in protective

900µm tubing

:: Jack assemblies compatible with

fusion or mechanical splices

MT-RJ Bend-Limiting Boots


X denotes color: -1 = Black, -2 = Beige, -3 = Blue

Product Facts

:: Compatible with all MT-RJ Jacks

:: Come in packages of six




Singlemode Blue 1374020-X

X denotes length: -1 = 1m, -2 = 2m, -3 = 3m

Note: Other pigtail cable assemblies are available, see Cable Assemblies chapter

page 161.


Red 1588568-X

SinglemodeYellow 1588569-X

Green 1588571-X

Blue 1588570-X







Product Facts

:: Compatible with MT-RJ Plug Snap-in

Adapter Plates


:: 250µm fiber in protective 900µm

tubing

:: MT-RJ plug assemblies compatible

with fusion or mechanical splices

MT-RJ SECURE Pigtail Jack Assemblies

MT-RJ Pigtail Plug Assemblies


FIB

ER

OP

TIC

SN

AP

-IN A

DA

PT

ER

PL

AT

ES


124


SC to ST- Style

Description Coupler Color Package Quantity Part Number

6-Fiber Multimode Beige1 559601-1

Duplex SC to ST-Stlye 100 559601-2

12-Fiber Multimode Beige 1 1278368-1

Product Facts

:: Fit AMP NETCONNECT Fiber

Optic Enclosures included in

this catalog

ST- Style

SC

12-Fiber Plate 6-Fiber Plate




Multimode Beige 1 559517-3

Simplex SC 6-Fiber Singlemode Blue 1 559517-1

Singlemode, APC Polish Green 1 559517-2

6-Fiber- 1 559558-X

Duplex SC - 100 559516-X

12-Fiber - 1 559596-Y

X denotes fiber type: -1 = Multimode (Beige Couplers), -2 = Singlemode (Blue Couplers)Y denotes fiber type: -1 = Multimode (Beige Couplers), -2 = Singlemode (Blue Couplers), -3 = Singlemode, APC Polish (Green Couplers)

Description Package Quantity Part Number

12-FiberMultimode 1 1374463-3

Duplex SCSinglemode 1 1374463-1

24-FiberMultimode 1 1435516-2

Singlemode 1 1435516-1

LC


Multimode Metallic 1 559557-1

Simplex ST-Style 6-Fiber Multimode Metallic 100 559515-1

Singlemode Metallic 1 559515-2

Duplex ST-Style 12-Fiber 1 1278567-X

X denotes fiber type: -1 = Multimode (Beige Coupler), -2 = Singlemode (Blue Coupler)



AD

AP

TE

R P

LA

TE

S &

LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES


125


Description Package Quantity Part Number

Blank1 559523-1

100 559575-1

SL Series Discrete Adapter Plate 1 1479506-1

Miscellaneous Snap-In Adapter Plates

Product Facts

:: Loaded with MT-RJ 6-Pack Housings

:: Holds up to twenty-four (standard or

Secure) MT-RJ Patch Panel Jacks or

MT-RJ Pigtail Jack Cable Assemblies

(each purchased separately, see page

122-123)



:: Cable strain reliefs and management

rings included


:: Fit standard TIA 19" racks

Fiber Optic Enclosures, Loaded


1U (1.75-inch) MT-RJ Jack RMPE


Fiber Densities

Fiber Density Duplex Port DensityInsert Type

(max) (max)

2-Fiber MT-RJ Jacks 48 24

Product Facts



:: Cable strain reliefs and

management rings included

:: Forward, flush or recessed

mounting


:: Each enclosure will accept

up to 2 splice trays on

page 118 and 121

1U (1.75-inch) SC and ST-Style RMPE

DescriptionCoupler Fiber Duplex Port Part

Color Density Density Number

Simplex Multimode Metallic12 6 2-1206114-4

ST-Style 24 12 4-1206114-4

- - - - - 1206114-8

Multimode Beige12 6 2-1206138-4

SC Duplex24 12 4-1206138-4

12 6 2-1348960-4Singlemode Blue

24 12 4-1348960-4

Product Facts

:: SL Series Discreet Adapter Plates

accept SL Series Jacks and Inserts

:: Fit AMP NETCONNECT Fiber Optic

Enclosures included in this catalogBlank SL Series


LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES

AN

D A

CC

ES

SO

RIE

S


126


Description Cable Diameter Part Number

Cable StrainRelief (3.5 - 8mm) 1206144-1

Cable StrainRelief (9 - 14mm) 1206145-1

Cable Management Rings Kit — 1206146-1

Accessories for 1U Rack Mount Enclosures

Product Facts



:: Cable strain reliefs and

management rings included

:: Forward, flush or recessed

mounting


:: Each enclosure will hold up to 2

splice trays on page 118 and

121


1U (1.75-inch) LC RMPE



Multimode Beige24 12 2-1671000-8

LC Duplex48 24 4-1671000-8

24 12 2-1671000-4Singlemode Blue

48 24 4-1671000-4


LO

AD

ED

FIB

ER

EN

CL

OS

UR

ES


127


Wall Mount Splice & Patch Enclosure (WMSPE)

Double Sided, Single Door WMSPEProduct Facts

:: Fusion splice tray, splice tray

bracket, cable management rings

and warning labels included

:: Fusion splice tray accepts up to

twelve splices

:: Top and bottom, left and right side

cable entries feature plastic cable

grommets

:: Integral hasp for use with off-the-

shelf padlocks





12" (30.5cm) H x 3" (7.6cm) D x

12" (30.5cm) W



Multimode Beige 12 6 1435467-3

12 6 1435467-4SC Duplex

Singlemode Blue 6 3 1435467-1

2 1 1435467-2

Wall Mount Patch Enclosure (WMPE)

Double Sided, Single Door WMPE Product Facts

:: Integral hasp for use with off-the-shelf

padlocks




:: Dimensions (for exact measurements

consult customer drawings):

12"(30cm)H x 3"(77cm)D x

12"(30cm)W

Description Fiber Density Duplex Port Density Part Number

ST-Style Simplex Multimode12 6 1435129-1

24 12 1435129-2

SC Duplex Multimode12 6 1435130-1

24 12 1435130-2


CA

TE

GO

RY

6 P

AT

CH

PA

NE

LS


128


Product Facts

:: Tyco Electronics features a

comprehensive line of

AMP NETCONNECT 110Connect,

SL Series, ACO, discrete jack and

25-pair patch panels for twisted pair

applications

Twisted Pair Patch Panels

Product Facts

:: Meet or exceed TIA and ISO Category 6component performance requirements

:: Each Hinged SL Series Patch Panel:

··· Includes one 5-Ring Cable ManagementPanel (1U with 24-port, 2U with 48-Port), and two hinged brackets

··· 24-Port is 2U (3.50") total whenmounted with cable management


:: Hinged feature allows patch panel to befolded down for easy access to the back ofthe panel, while snapping securely intoplace for normal use

:: Ports may be individually replaced

:: Universal wiring — may be terminated toT568A or T568B

:: Replacement labels and clear label coverson page 192

Product Facts

:: Meet or exceed TIA and ISO

Category 6 component performance

requirements


:: Available unloaded with jacks bagged

separately for termination with SL

Series Jack Termination Tool

:: Universal wiring — may be terminated

to T568A or T568B


covers on page 192

:: 12-Port Mini Patch Panels mounts

vertically on 89D bracket (included)

Category 6 SL Series Patch Panels

Description Height Width Part Number

12-Port 10.00" 2.3" 1375013-1

24-Port 1U (1.75") 19.0" 1375014-X

48-Port 2U (3.50") 19.0" 1375015-X

96-Port 4U (7.00") 19.0" 1375016-X

X denotes packaging: -1 = loaded, -2 = unloaded, jacks bagged

Category 6 Hinged SL Series Patch Panels


24-Port 1U (1.75") 19.0" 1479735-1

48-Port 2U (3.50") 19.0" 1479401-1


CA

TE

GO

RY

6 A

ND

5E

PA

TC

H P

AN

EL

S


129


Product Facts

:: Meet or exceed TIA and ISOCategory 6 component performancerequirements

:: Allow elimination of horizontal cablemanagement for higher rack densitiesand ease of cable dress


:: Universal wiring — may be terminatedto T568A or T568B

:: Replacement labels and clear labelcovers on page 192

Category 6 Angled SL Series Patch Panels


24-Port 1U 1.75" 19.0" 1479511-1

48-Port 2U 3.50" 19.0" 1479515-1

Product Facts


Enhanced Category 5 (Category 5e)


requirements


:: Available unloaded with jacks

bagged separately for termination

with SL Series Jack Termination

Tool

:: Universal wiring — may be

terminated to T568A or T568B


covers on page 192



Category 5E SL Series Patch Panels

Product Facts

:: Meet or exceed TIA and ISO Enhanced

Category 5 (Category 5e) component

performance requirements

:: Allow elimination of horizontal cable

management for higher rack densities

and ease of cable dress



to T568A or T568B


covers on page 192

Category 5E Angled SL Series Patch Panels


24-Port 1U (1.75") 19.0" 1479513-1

48-Port 2U (3.50") 19.0" 1479517-1


12-Port 10.00" 2.3" 1479153-1

24-Port 1U (1.75") 19.0" 1479154-X

48-Port 2U (3.50") 19.0" 1479155-X

96-Port 4U (7.00") 19.0" 1479156-X

X denotes packaging: -1 = loaded, -2 = unloaded, jacks bagged


EN

HA

NC

ED

CA

TE

GO

RY

5 P

AT

CH

PA

NE

LS


130


Product Facts




:: May be terminated using single-wire

or 5-pair tools


to T568A or T568B


covers on page 192



Category 5e 110Connect Patch Panels


12-Port 10.00" 2.3" 406390-1

12-Port 1U (1.75") 19.0" 406981-1

24-Port 1U (1.75") 19.0" 406330-1

48-Port 2U (3.50") 19.0" 406331-1

96-Port 4U (7.00") 19.0" 406332-1

Product Facts




:: Each Hinged SL Series Patch Panel:

··· Includes one 5-Ring CableManagement Panel (1U with 24-port, 2U with 48-Port), and twohinged brackets



:: Hinged feature allows patch panel to

be folded down for easy access to the

back of the panel, while snapping

securely into place for normal use


to T568A or T568B


covers on page 192

Category 5e Hinged 110Connect Patch Panels


24-Port 1U (1.75") 19.0" 1479734-1

48-Port 2U (3.50") 19.0" 1479400-1


EN

HA

NC

ED

CA

TE

GO

RY

5 P

AT

CH

PA

NE

LS


131


Product Facts




requirements


management for higher rack

densities and ease of cable dress


or 5-pair tools




covers on page 192

Category 5e Angled 110Connect Patch Panels


24-Port 1U (1.75") 19.0" 1479510-1

48-Port 2U (3.50") 19.0" 1479514-1

Product Facts




requirements


management for higher rack



or 5-pair tools




covers on page 192

Category 5e Integrated Cable Management

110Connect Patch Panels


24-Port 1U (1.75") 19.0" 1479206-1

48-Port 2U (3.50") 19.0" 1479208-1


CA

TE

GO

RY

5 P

AT

CH

PA

NE

LS


132


Category 5 110Connect Patch PanelsProduct Facts



requirements




or 5-pair tools


covers on page 192




12-Port 10.00" 2.3" 1479145-1

24-Port 1U (1.75") 19.0" 1479146-1

48-Port 2U (3.50") 19.0" 1479147-1

Category 5, 10/100BASE-T, RJ21 (25-Pair)Patch Panel and Cable Assemblies

Product Facts



requirements

:: Provides RJ45 breakouts from

10/100BASE-T switches and hubs

that use the 25-pair “Telco”

interface

:: Compatible with Cisco hubs and

switches

:: Use with 25-pair plug to plug cable

assemblies listed

:: Cable assemblies are for use with

this patch panel only

:: 2U (3.50") x 19" Patch Panel


Category 5, 10/100BASE-T, 25-Pair Patch Panel 1116732-1

Left-hand Exit Cable Assembly 1116733-X

Right-hand Exit Cable Assembly 1116734-X

X denotes length in feet: -5 = 5, -7 = 7, 1- -0 = 10, 1- -5 = 15


CA

TE

GO

RY

3 P

AT

CH

PA

NE

LS


133


Product Facts



requirements

:: Available in 2- through 4-pair for

voice and low speed data

applications

:: Fit standard 19" racks

Description Height Wiring Pattern Part Number

24-Port 1U (1.75")RJ25C (3-Pair) 558257-1

RJ14C (2-pair) 557403-1

32-Port 2U (3.50")T568A 556968-1

T568B 556797-1

48-Port 2U (3.50")RJ25C (3-pair) 558258-1

RJ14C (2-pair) 557411-1

96-Port 4U (7.00")RJ25C (3-pair) 558259-1

RJ14C (2-pair) 557415-1

Category 3 Patch Panels

Category 3 KEYSTONE Jack PanelsProduct Facts

:: Panels feature 6- or 8-position

commercial (clear caps)

KEYSTONE Jacks, with

AMP-BARREL terminals for toolless

termination of 22-26 AWG wires

:: Once terminated, the jacks simply

snap into the panel

:: Jack Panel Kits include appropriate

number of 6- or 8-Position

Keystone Jacks

Mix-and -Match PanelsProduct Facts

:: Panels will accept 6- or 8-position

modular couplers on page 96 and

Keystone Jacks on page 95

purchased separately

Description Modular Jack Type Height Width Part Number

3-Pair (6-Position) 2U (3.50") 19" 555500-132-Port

4-Pair (8-Position) 3U (5.25") 19" 555501-1

3-Pair (6-Position) 3U (5.25") 19" 555502-148-Port

4-Pair (8-Position) 3U (5.25") 19" 555503-1


32-Port 3U (5.25") 19" 555522-1

48-Port 3U (5.25") 19" 555524-1


Description Height Width Modular Jack Type Active PinsWiring Number of

Part NumberDiagram 25-Pair Plugs

1-Pair (6-Pos.) 3&4 A 1 556189-1

24-Port 1U (1.75") 19"2-Pair (6-Pos.) 2-5 D 2 556183-1

4-Pair (8-Pos.) 1-8 G 4 556180-1

4-Pair (8-Pos.) 1-8 F 4 556186-1

1-Pair (8-Pos.) 4&5 C 2 555480-1

1-Pair (6-Pos.) 3&4 A 2 555481-1

32-Port 2U (3.50") 19" 2-Pair (6-Pos.) 2-5 D 3 555366-1

3-Pair (6-Pos.) 1-6 E 4 555043-1

4-Pair (8-Pos.) 1-8 F 6 555370-1

1-Pair (8-Pos.) 4&5 C 2 555482-1

1-Pair (6-Pos.) 3&4 A 2 555483-1

2-Pair (6-Pos.) 2-5 D 4 555375-1

48-Port 3U (5.25") 19" 2-Pair (8-Pos.)10BASE-T 1-3&6 H 4 556905-1

3-Pair (6-Pos.) 1-6 E 6 555346-1

4-Pair (8-Pos.) 1-8 F 8 555383-1

4-Pair (8-Pos.) 1-8 G 8 556641-1

CA

TE

GO

RY

3 P

AT

CH

PA

NE

LS


134


Product Facts



requirements

:: Available in 2- through 4-pair for

voice and low speed data

applications

Back

25-Pair Patch Panel Wiring Configurations

A. 1-Pair (6-Position) D. 2-Pair (6-Position)

G. 4-Pair (T568A)

B. 1-Pair (6-Position)

E. 3-Pair (6-Position)

C. 1-Pair (8-Position)

F. 4-Pair (T568B) H. 2-Pair (10BASE-T Wiring)

Note: On 32-Port 1-Pair panels CHAMP plugs are loaded pairs 1-16. All others are loaded pairs 1-24.

Front

Category 3 25-Pair Patch Panels


SL

SE

RIE

S D

ISC

RE

TE

PA

TC

H P

AN

EL

S


135


Product Facts

:: Accept unshielded SL Series Jacks

and inserts

:: May be used to create custom

configurations – including mixing

fiber, twisted-pair, coax and A/V

applications



covers on page 192

Multimedia SL Series Patch Panels


12-Port 10.00" 2.3" 1375289-1

12-Port 1U (1.75") 19.0" 1375290-1

24-Port 1U (1.75") 19.0" 1375291-1

48-Port 2U (3.50") 19.0" 1375292-1

Product Facts


and inserts




applications

:: Allow elimination of horizontal

cable management for higher rack




covers on page 192

Multimedia Angled SL Series Patch Panels


24-Port 1U (1.75") 19.0" 1479512-1

48-Port 2U (3.50") 19.0" 1479516-1

Product Facts


and inserts




applications

:: Allow elimination of horizontal

cable management for higher rack




covers on page 192

Multimedia Integrated Cable ManagementSL Series Patch Panels


24-Port 1U (1.75") 19.0" 1479449-1

48-Port 2U (3.50") 19.0" 1479450-1


DIS

CR

ET

E S

L S

ER

IES

PA

TC

H P

AN

EL

S


136


SL Series Modular Jack Patch PanelsProduct Facts

:: Accept shielded and unshielded SL

Series Jacks


configurations





12-Port 10.0" 2.3" 1116753-1

24-Port 1U (1.75") 19.0" 1116749-X

48-Port 2U (3.50") 19.0" 1375119-1

X denotes shielding: -1 = Unshielded, -2 = Shielded

Product Facts

:: Accepts SL Series Jacks, MT-RJ Outlet

Jacks, and SL Series Inserts

(purchased separately)


configurations – including mixing fiber,

twisted-pair, coax and A/V

applications

:: Allows for easy integration of fiber

with copper in the same patch panel

:: Anodized aluminum finish provides

strength, light weight and ease of

assembly

:: Clear cover on rear allows easy

accessibility

:: Shelf in back of panel organizes and

manages cable

:: Uses 110Connect XC labels on

page 193

:: 2U (3.50") x 19" W x 8" D

Discrete Multimedia SL Series Patch Panel


Product Facts

:: 6-Port modules may be removed

and inserted from front of patch

panel

:: For use where access behind patch

panel is limited


and Inserts


configurations

Multimedia Front-Loading SL Series

Patch Panels


24-Port 1U (1.75") 19.0"Standard (Flush) 1479738-1

Angled 1479573-1

48-Port 2U (3.50") 19.0"Standard (Flush) 1479739-1

Angled 1479574-1


DIS

CR

ET

E 1

10

CO

NN

EC

T P

AT

CH

PA

NE

LS

& IN

SE

RT

S


137



Blank A 558856-X

Multimode ST-Style Coupler B 558860-X

BNC Coupler C 558861-X

F-Connector Coupler D 558862-X

RCA, Solder-Type E 569983-X

X denotes color: -1=Black, -2=Almond

*Note: Not compatible with 110Connect Faceplates or Office Boxes.

Inserts for 110Connect Modular Jack Patch Panels andStandard FLEX-MODE Electrical Faceplates

AB C

ED

Product Facts

:: Used with 110Connect Modular Jack

Patch Panels

:: Multimode ST-Style Coupler is

suitable for use with Multimode

Connectors

Product Facts

:: Shielded patch panels accept shielded

110Connect and SL Series Jacks and

Inserts for 110Connect Modular Jack

Patch Panels

:: Unshielded patch panels accept

unshielded 110Connect and SL Series

Jacks and Inserts for 110Connect

Modular Jack Patch Panels


configurations


110Connect Modular Jack Patch Panels

Unshielded, Black


16-Port 1U (1.75") 19.0" 557429-X

32-Port 2U (3.50") 19.0" 557430-X

48-Port 3U (5.25") 19.0" 557431-X

X denotes shielding: -1 = Unshielded, -2 = Shielded

Note: Shielded patch panels use grounding lug kit 556438-1 for isolated

grounding

Unshielded

Shielded


CA

TE

GO

RY

6 A

CO

PA

TC

H P

AN

EL

S


138


AMP Communications Outlets (ACO)

Category 6, ACO Single-Port PatchPanel Kits, Preloaded

Product Facts


adaptability of the ACO System with

the performance and headroom of

AMP NETCONNECT Category 6

:: Exceed TIA and ISO requirements for


requirements

:: Category 6 ACO Installation Kits are

backwardly compatible with standard

ACO Inserts

:: Preloaded with Category 6 ACO Single-

Port Installation Kits. Category 6 ACO

Inserts purchased separately, see

page 73


Description Height Width Figure Part Number

Iconable 2U (3.50") 19" AShielded 1479312-1*

16-Port Unshielded 1479311-1*

Non-Iconable 3U (5.25") 19" BShielded 1479310-1

Unshielded 1479309-1

32-Port Non-Iconable 4U (7.00") 19" CShielded 1479314-1


64-Port Non-Iconable 8U (14.00") 19" DShielded 1479316-1


Note: Iconable patch panels accept AMP NETCONNECT Icons for identification. Icons are purchased separately (see page 194)

A

B

C

D


AC

O S

ING

LE

-PO

RT

PA

TC

H P

AN

EL

S


139


ACO Single-Port Patch Panel Kits, Preloaded

Part Number

Description Height AMP-BARREL 110Connect

Edge Connector Edge Connector

2U (3.50")Unshielded 406356-2 406363-1

16-PortShielded 406356-1 —

3U (5.25")Unshielded, Iconable 406369-1 406359-1

Shielded, Iconable 406370-1 —

32-Port 4U (7.00")Unshielded 406357-2 406365-1

Shielded 406357-1 —

64-Port 8U (14.00")Unshielded 406358-2 406367-1

Shielded 406358-1 —

Note: Both AMP-BARREL and 110Connect edge connectors provide Category 5e performance when combined with

Category 5e inserts.

Product Facts

:: ACO Inserts sold separately

(see pages 73-81)

:: Preloaded with shielded or

unshielded single-port

connector housings

:: Provide flexibility and

adaptability

:: Apply an adapter insert,

identical to the outlet insert,

to the closet of the cable

:: Eliminate wiring errors and

provide transparent migration

between applications

:: Each kit contains preloaded

panel, edge connectors,

ground shields, EMI/RFI clips,

mounting hardware and

isolation bushings

:: AMP Communications Outlet

Adapter (ACO) Inserts on

pages 73-81


ACO Single-Port Patch Panel Kits, Unloaded

Note: Inserts sold separately

Product Facts

:: Provide flexibility and adaptability

:: Allow construction of

unshielded or mixed

(shielded/unshielded) panels

:: Each kit contains a panel, faceplates,

mounting hardware and isolation bushings

:: Single-port installation kits (on page 140)


:: ACO inserts on pages 73-81


16-Port 2U (3.50") 19.0" 556245-1

32-Port 4U (7.00") 19.0" 556246-1

64-Port 8U (14.00") 19.0" 556247-1


AC

O S

ING

LE

PO

RT

-INS

TA

LL

AT

ION

KIT

S


140


ACO Single-Port Installation Kits


1.312"±.010

1.875"±.010

.010" R Max.Typical


Unshielded Single-Port Installation Kit110-Style 406360-1

AMP BARREL 406389-1

Shielded Single-Port Installation Kit110-Style 406361-1

AMP BARREL 406388-1


Product Facts


unshielded kits

:: Single-port module may be






thicker panels





knockouts



applications



connector, and shield clip/

strainrelief




clip/strain-relief

Unshielded

Shielded

Category 6 ACO Single-Port,Installation Kits Product Facts


unshielded kits




headroom of


:: Exceed TIA and ISO

requirements for Category 6


requirements

:: Category 6 ACO Installation

Kits are backwardly compatible



:: Single-port module may be






thicker panels





knockouts



applications



connector, and shield

clip/strainrelief




clip/strain-relief


Category 6 Single-Port110-Style


Installation Kit Shielded 1479318-1

Note: Not for use with Type 1 Cable.

Unshielded

Shielded


1.312"±.010

1.875"±.010

.010" R Max.Typical


AC

O D

UA

L-P

OR

T IN

ST

AL

LA

TIO

N K

ITS


141


Product Facts

:: Provides flexibility andadaptability

:: Kit includes patch panel, cover plates

and mounting hardware to support

eight AMP Communications Outlets

:: Dual-port installation kits

(below) are purchased separately

:: ACO Inserts are purchased separately

on pages 73-81

:: Panel height - 5.25"

ACO Dual-Port Patch Panel Kit,

16-PortPART NO. 556090-1

Product Facts


:: Category 6 Dual-Port

Installation Kits -

··· Combines the flexibility

and adaptability of the

ACO System with the

performance and

headroom of

AMP NETCONNECT

Category 6

··· Exceed TIA and ISO

requirements for

Category 6 component


when combined with

Category 6 Inserts

··· Category 6 ACO

Installation Kits are

backwardly compatible


··· Unshielded kits include

unshielded insert housing,

and two edge connectors

··· Unshielded kits are

recommended for

installation in 4" square x

2-1/2" deep electrical

boxes with standard 100

Ohm UTP cable

:: Standard Dual-Port

Installation Kits

··· Both 110-Style and AMP-

BARREL terminations

provide Category 5e

performance when

combined with Category

5e inserts

··· Available in both shielded

and unshielded kits

··· Unshielded kits include

unshielded insert housing,

and two edge connectors

··· Unshielded kits are

recommended for




Ohm UTP cable

··· Shielded kits include

shielded insert housing,

two edge connectors,

ground shield and shield

clip/strain-relief

··· Shielded kits are

recommended for




Ohm shielded cable (110-

Style Edge Connectors) or

150 Ohm Type 1 cable

(AMP-BARREL Edge

Connectors)


Category 6 Dual-Port Installation Kit 110-Style Unshielded 1479306-1

110-Style Unshielded 406091-1

Standard Dual-Port Installation KitAMP-BARREL

Unshielded 406352-1

Shielded 555601-1


Category 6 and Standard ACO

Dual-Port Installation Kits

Standard AMP-BARREL Standard 110-Style

Wall brackets and

grounding lug kit on pages

142-143.

Category 6, 110-Style


(depth)

556742-2 (Shown)

PA

TC

H P

AN

EL

AN

D R

AC

K A

CC

ES

SO

RIE

S


142


Adapter for 89B Bracket


Product Facts

:: Used to mount a 50-pair

110Connect XC wiring block on

an 89B bracket

:: Two adapters are required for each

assembly

:: Wiring blocks and 89B brackets


Grounding Lug Kit

PART NUMBER 556438-1 Product Facts

:: Use for grounding panels to

locations other than rack

:: Accommodates a maximum wire

size of 6 AWG

Product Facts

:: Fit AMP Communications Outlet

(ACO) Single-Port Patch Panels

:: Provide additional support for

heavier cables (such as Type 1)

:: 16-Port panels accept one bracket,

32-port panels accept two brackets,

64-port panels accept four brackets

Cable Support Brackets2-7/8 INCHES, PART NUMBER 556742-1

4-1/2 INCHES, PART NUMBER 556742-2

Product Facts

:: Designed to provide additional cable

support and routing control in the

rear of 19" racks and panels

:: Compatible with Category 5, 5e

and 6 110Connect and SL Series

Patch Panels on pages 128-132


Mounts to back of rack, 5" deep 557548-1

Mounts to back of rack, 2" deep 406042-1

Mounts to rear of Cable Management Panels 558301-1

Mounts to rear of 110Connect and SL Series Patch Panels 569590-1

Cable Support Bars

Product Facts

:: Standard 19" length panels are

designed for use in filling equipment

rack voids

Blank Panels

Height Part Number

1U (1.75") 556965-1

2U (3.50") 556965-2

3U (5.25") 556965-3

4U (7.00") 556965-4

5U (8.75") 556965-5


PA

TC

H P

AN

EL

AN

D R

AC

K A

CC

ES

SO

RIE

S


143


Product Facts

:: Can be installed with hinges on

either side for easier access

:: Available in 4" or 6" depth to allow

room for cable management and

proper cable bend radius

:: 6" depth brackets are provided with

cable tie laces to aid in dressing

cables, have multiple threaded holes

allowing more than one panel to be

mounted on a bracket, and rear entry

cable holes.

Hinged Wall Brackets for 19-Inch Panels

Height

‘

‘Depth

‘

‘

Panel HeightPart Number

4" Depth 6" Depth

1U (1.75") 557396-1 558266-1

2U (3.50") 555269-1 558267-1

3U (5.25") 555273-1 558268-1

4U (7.00") 555275-1 558269-1

5U (8.75") 556205-1 -

6U (10.50") 555276-1 -

Stationary, Ventilated ShelfPART NUMBER 1435049-1 Product Facts

:: Ventilation slots easily allow air flow

:: 2U (3.50")

:: Fits standard 19" racks

:: Includes fastening hardware

Product Facts

:: For use with standard patch panels

for hinged application where access

behind patch panel is limited

:: Hinged feature allows patch panel to

be folded down for easy access to the

back of the panel, while snapping

securely into place for normal use

:: Cable management panels have

special ring spacing for hinged

applications

:: Hinged panels may not be stacked

adjacent to one another in a rack

without a cable management panel or

a 1/2" of empty space between them

Hinged Patch Panel Accessories


Patch Panel Hinge Kit1U (1.75") 1479582-1

2U (3.50") A 1479402-1

Cable Management Panel 1U (1.75") 1479732-1

for Hinged Patch Panels 2U (3.50") B 1479733-1

Open Closed(Installed)

A

B


RA

CK

MO

UN

T C

AB

LE

MA

NA

GE

ME

NT


144


Panel Height Front (H x D) Rear (H x D) Part Number

1U (1.75") 1.5" x 2" 1" x 4" 1375160-1

1U (1.75") 1.5" x 3" 1" x 4" 1375159-1

2U (3.50") 3.0" x 3" 2" x 4" 1375158-1

Panel Height Front (H x D) Part Number

1U (1.75") 1.5" x 2" 1375161-1

1U (1.75") 1.5" x 3" 1375162-1

2U (3.50") 3.0" x 3" 1375163-1

Product Facts

:: Cable management accessories

for EIA standard 19" equipment racks

:: Suitable for high performance

twisted pair and optical fiber

distribution cables and patch cords

:: Horizontal finger duct panels available

in single- and

double-sided versions

Product Facts


for EIA standard 19" equipment racks



distribution cables and patch

cords

:: Horizontal finger duct panels available

in single- and


Finger Duct

Horizontal Finger Duct Panels, Double-Sided

Horizontal Finger Duct Panels, Single-Sided

Side Mount

Panel Height Front (W x D) Rear (W x D) Part Number

35" 4" x 5" 4" x 5" 1375164-1

78" 4" x 5" 4" x 5" 1375257-1

Center Mount

(mounting flanges on both sides to straddle two racks)

Panel Height Front (W x D) Rear (W x D) Part Number

35" 4" x 5" 4" x 5" 1375166-1

78" 4" x 5" 4" x 5" 1375259-1

Vertical Finger Duct Panels, Double-SidedProduct Facts


for EIA standard 19" equipment

racks




cords

:: Vertical finger duct panels

available in single- and



2U (3.50-Inch) with Cable Clips


RA

CK

MO

UN

T C

AB

LE

MA

NA

GE

ME

NT


145


Side Mount

Panel Height Front (W x D) Part Number

35" 4" x 5" 1375165-1

78" 4" x 5" 1375258-1

Center Mount

(mounting flanges on both sides to straddle two racks)

Panel Height Front (W x D) Part Number

35" 4" x 5" 1375167-1

78" 4" x 5" 1375260-1

Finger Duct Panels

Vertical Finger Duct Panels, Single-SidedProduct Facts


for EIA standard 19"

equipment racks




cords

:: Vertical finger duct panels

available in single- and


2U (3.50-Inch)


Product Facts

:: Panels mount to the front of

19-inch racks and provide for the

orderly dressing and routing of

cable assemblies

:: Threaded studs on the back of

the panels allow the

installationof an optional

Cable Support Bar on

page 142

:: 2U (3.50") 569049-1 comes with

cable clips

Ringed Cable Management Panels

Horizontal Ringed Cable Management Panels

1U (1.75 -Inch)



RA

CK

MO

UN

T C

AB

LE

MA

NA

GE

ME

NT


146


Product Facts

:: Mount between adjacent panels

:: Provide a vertical “trough” for patch

cable management


Single Ring 558334-1

Double Ring (for front and rear management) 406498-1

Rack Mount Cable Management Rings

Vertical Management Rings

Product Facts

:: Lightweight durable 11-gauge

aluminum

:: Fit standard 19” racks

:: Mounts to standard EIA hole

pattern

:: Provide cable management

within the rack bay or multiple

rack line-ups

:: Top Trough

··· Features down-radiused cable

exit to vertical cable

management

··· Dimensions (overall) –

4.20" H x 19.00" W x 3.75" D

··· Mounts in 1U (1.75") of rack

space

:: Bottom/Middle Trough

··· Dimensions (overall) –

5.22" H x 19.00" W x 3.75" D

··· Mounts in 3U (5.25") of rack

space

Rack Mount Cable Trough

Top TroughPART NUMBER 559370-1

Bottom/Middle TroughPART NUMBER 559369-1

Product Facts

:: Lightweight durable 11-gauge

aluminum

:: Front and rear management

designed into one piece

:: Compact size for simple, quick

installation

:: Mounts to standard EIA hole

pattern

:: High capacity management

rings for large patching

applications

:: One design accommodates both

endmount and inter-bay

management needs

:: Partial or full rack loading

:: Requires rack with standard EIA

hole pattern on both front and

rear surfaces of channel

uprights

:: Dimensions – 24.40" H x 3.47" W

:: Four Cable Management Rings,

Dimensions – 3.50" W x 6.25" D

Vertical Ringed Cable Management Panels



RA

CK

MO

UN

T C

AB

LE

MA

NA

GE

ME

NT


147


Product Facts

:: Rings are installed directly on

19-inch racks with the same

mounting screws used to secure

the panels to the rack

:: Provide a space-saving alternative

to cable management panels

:: Must be ordered to match the

height of the panels to which they

are attached

Rack Mount Cable Management and Accessories

Cable Management Rings

1U (1.75-Inch)PART NUMBER

558312-1


558265-1


556560-1

4U (7.00-Inch*)PART NUMBER

556561-1


556745-1

9U (15.75 -Inch)PART NUMBER

556562 -1

*Use two for a 14-inch panel.


61

0X

C C

ON

NE

CT

ING

AN

D W

IRIN

G B

LO

CK

S


148


6-110XC Category 6 Cross-Connect System


4-Pair 1479245-1

5-Pair 1479246-1

6-110XC 4- and 5-Pair Category 6 Connecting Blocks

Product Facts

:: Meets or exceeds TIA and ISO

specifications for Category 6


:: Features the same footprint and

densities as standard 110Connect

XC Cross-Connect System products

:: Utilizes shielded crosstalk barrier

technology for superior

performance

:: Totally new design – High tech

black color and silver plating helps

to differentiate between standard

crossconnect and Category 6

products

:: Supports applications from voice to

high-speed data

:: Compatible with standard 1-Pair

tools as well as 610XC 4-Pair Tool

on page 240

:: UL Listed

:: CSA and Austel approved

Product Facts

:: Utilize shielded crosstalk barrier

technology for superior performance

:: Utilize double-ended insulation

displacement contacts (IDC) that

terminate 24-22 AWG solid or

stranded conductors with a maximum

O.D. of .063"

:: Available in 4- and 5-pair sizes with

the appropriate color coding


50-Pair 1479247-1

with Legs 100-Pair 1479248-1

300-Pair 1479249-1

without Legs 50-Pair 1479250-1

100-Pair 1479251-1

6-110XC Category 6 Wiring BlocksProduct Facts

:: Accept 24-22 AWG conductors

:: Available with and without legs

:: Wiring blocks with legs are

available in 50-, 100- and 300-pair

sizes

:: Wiring blocks without legs are

available in 50- and 100-pair sizes

:: Labels available on page 193Without Legs With Legs


61

0X

C C

RO

SS

-CO

NN

EC

T A

ND

FR

AM

E K

ITS


149


6-110XC Category 6 Cross-Connect Kits

Description Connecting Blocks Part Number

50-Pair4-Pair 1479252-1

5-Pair 1479253-1

100-Pair4-Pair 1479254-1

5-Pair 1479255-1

300-Pair4-Pair 1479256-1

5-Pair 1479257-1

Product Facts

:: Kits include wiring blocks with legs,

connecting blocks, designation strips

and white labels marked for the pair

counts listed

:: Additional labels available on

page 193


300-Pair4-Pair 1479258-1

5-Pair 1479259-1

900-Pair4-Pair 1479260-1

5-Pair 1479261-1

Product Facts

:: Reduce time needed for planning

and installing a cross-connect on a

backboard

:: Kits include metal back frame,

wiring blocks without legs,

connecting blocks, cable

management troughs without legs,

designation strips, white labels

marked for the pair counts listed,

grounding strap and appropriate

hardware


page 193

:: Quick and easy installation

:: Available in 300- and 900-pair sizes

with either 4- or 5-pair connecting

blocks

6-110XC Category 6 Cross-Connect Distribution Frame Kits


61

0X

C C

AB

LE

MA

NA

GE

ME

NT

& R

AC

K M

NT

. PA

NE

LS


150



Cable Management Trough Blackwith Legs 569389-3

without Legs 569597-3

Vertical Cable Management Frame Black300-Pair 569851-3

900-Pair 569852-3

Product Facts

:: Provide high capacity storage,

management and organization of

cables and jumper wire


:: Vertical Cable Management Frames

available in 300- and 900-pair sizes

6-110XC Cable Management

Description Pair CountConnecting

Height Width Part NumberBlocks

6-110XC Cross-Connect100-Pair 4-Pair 1U (1.75") 19" 1479622-1

Rack Mount Panel Kits200-Pair 4-Pair 2U (3.50") 19" 1479623-1

400-Pair 4-Pair 5U (8.75") 19" 1479624-1

Cable Management Trough Rack Mount Panel 2U (3.50") 19" 406641-2

Product Facts

:: For mounting 6-110XC hardware on

a 19" rack

:: Kits include wiring block panels,

4-Pair connecting blocks,

designation strips and white labels

for the pair counts listed

:: Wiring block and cable

management panels available

6-110XC Rack Mount Cross-Connect Panel Kits



151


11

0C

ON

NE

CT

XC

CO

NN

EC

TIN

G &

WIR

ING

BL

OC

KS

110Connect XC Cross-Connect System


3-Pair 558400-1

4-Pair 558401-1

5-Pair 558402-1

Product Facts

:: Supports applications from voice to

high-speed data

:: Offers a reliable and economical

high-density system

:: Exceeds the TIA specifications for


:: All components compatible with

industry standard

AMP NETCONNECT Impact Tools

(on page 239), the KRONE

Tool and the 788J1 5-pair tool

:: UL listed

:: CSA and Austel approved

Product Facts

:: Utilize double-ended insulation

displacement contacts (IDC) that

terminate 22-26 AWG solid or

stranded conductors with a

maximum O.D. of .063 inch

:: Available in 3-, 4- and 5-pair sizes

with the appropriate

color coding

Connecting Blocks

Product Facts


:: Blocks are available in 50-, 100

and 300-pair sizes with legs for

backboard mounting


Wiring Blocks with Mounting Legs

Wiring Blocks 50-Pair 100-Pair 300-Pair

w/mounting legs 558841-1 558842-1 558843-1



152


11

0C

ON

NE

CT

XC

WIR

ING

BL

OC

KS

AN

D K

ITS

Product Facts



110Connect XC Kits

Product Facts

:: Kits include wiring blocks

with legs, connecting blocks,

designation strips and white

labels for the pair counts

identified


page 193


50-Pair 3- & 4-Pair Connecting Blocks 569432-1


50-Pair 5-Pair Connecting Blocks 569434-1







Wiring Blocks without Mounting Legs

Wiring Blocks 50-Pair 100-Pair

w/o mounting legs 558839-1 558840-1



153


11

0C

ON

NE

CT

XC

FR

AM

E K

ITS

110Connect XC Cross-Connect System

Cross-Connect Distribution Frame KitsProduct Facts

:: Reduce time needed for planning

and installing a cross-connect on

a backboard

:: Include metal back frame, wiring

blocks, connecting blocks, cable

management troughs, designation

strips and

appropriate hardware



with either 3-, 4- or 5-pair

connecting blocks


300-Pair 3- & 4-Pair 569853-1

300-Pair 4- & 5-Pair 569854-1

300-Pair 5-Pair 569855-1

900-Pair 3- & 4-Pair 569856-1

900-Pair 4- & 5-Pair 569857-1

900-Pair 5-Pair 569858-1

110Connect Cross-Connect Cable Management110Connect XC Cable Management Troughs

Product Facts

:: Provide horizontal management and

organization of cables

:: Troughs are available with or

without legs


Cable Management TroughWith Legs 558635-1

Without Legs 558639-1


11

0C

ON

NE

CT

XC

CA

BL

E M

AN

AG

EM

EN

T


154


Product Facts

:: Provides high capacity storage of

patch cables and jumper wire



Vertical Cable Management Frame300-PAIR, PART NUMBER 569851-1

900-PAIR, PART NUMBER 569852-1

Cable Management Rings5.7-INCH WIDTH, PART NUMBER 569431-1

8.5 -INCH WIDTH, PART NUMBER 569599-1

Product Facts

:: Provide vertical management and

organization of cables

:: Available in two widths

:: Suitable for mounting directly to a

plywood backboard

Product Facts

:: For mounting cross-connect

hardware on a 19-inch rack

:: Wiring block and cable

management panels available


:: Connecting blocks and plastic label

covers purchased separately

Cross-Connect Rack Mount Panel Cable

Management3.50-INCH HIGH, PART NUMBER 406641-1

Description Height Part Number

100-Pair 1U (1.75") 558635-1

200-Pair 2U (3.50") 558637-1

400-Pair 5U (8.75") 558639-1

Cross-Connect Rack Mount Panel


CA

BL

E M

AN

AG

EM

EN

T A

CC

ES

SO

RIE

S


155


Dimensions (Approximate)Minimum Tensile Maximum Bundle Package Part

Length Width ThicknessStrength Diameter in(mm)

ColorQuantity Number

in(mm) in(mm) in(mm)

Natural 1000 2-604771-9

4 (103.0) 0.096 (2.44) 0.037 (0.94)18 lbs

0.75 (19.10)Black 1000 2-604771-0

80.1 N Natural 100 1-604771-9

Black 100 1-604771-0

Natural 1000 2-603227-9

6 (155.0) 0.140 (3.56) 0.045 (1.14)30 lbs

1.25 (31.75)Black 1000 2-603227-0

133.5 N Natural 100 1-603227-9

Black 100 1-603227-0

Natural 1000 2-604772-9

8 (204.0) 0.184 (4.67) 0.047 (1.19)50 lbs

1.75 (44.45)Black 1000 2-604772-0

222.5 N Natural 100 1-604772-9

Black 100 1-604772-0

Natural 1000 2-604751-9

12 (300.0) 0.183 (4.65) 0.051 (1.30)50 lbs

3.00 (76.20)Black 1000 2-604751-0

222.5 N Natural 100 1-604751-9

Black 100 1-604751-0

Product Facts

:: For 8-inch and 12-inch ties,

an order quantity of one equals

one roll of twenties


1" x 8" 1375253-X

1" x 12" 1375254-X

5/8" x 5 yards 1375255-X

1" x 12" Flame Retardant* 1375256-2

X denotes color: -2 = Black, -3 = White, -4 = Gray, -5 = Orange,

-6 = Blue, -7 = Red, -8 = Yellow, -9 = Green, 1- -0 = Violet

*Complies with NEC 300-22(c) and (d) for use in environmental air handling

spaces. Available in Black only.

VELCRO Cable Ties

AMP-TY Nylon Cable Ties


CA

BL

E M

AN

AG

EM

EN

T A

CC

ES

SO

RIE

S


156


Material Color Size Range ft/box Part Number

1/2"1/16" to 1/2" 50 500000-1

Natural1/16" to 1/2" 100 500000-2

1/4" 3/16" to 2" 50 500001-11/2" 3/8" to 4" 50 500002-1Polyethylene1/4" 3/16" to 2" 50 500004-1

Flame Retardant, Indoor White1/2" 3/8" to 4" 50 500005-11/4" 3/16" to 2" 50 500030-1

Outdoor Black 1/2" 3/8" to 4" 50 500031-2

1/8"1/16" to 1/2" 50 500013-1

Natural1/16" to 1/2" 100 500013-2

Nylon1/4" 3/16" to 2" 50 500015-1 1/2" 3/8" to 4" 50 500017-1

Outdoor Black1/4" 3/16" to 2" 50 500036-11/2" 3/8" to 4" 50 500037-1

1/8"1/16" to 1/2" 50 500023-1

TEFLON* 1/16" to 1/2" 100 500023-2 1/4" 3/16" to 2" 50 500024-1

Product Facts

:: Made of black nylon

:: Operating Temperature: -40° F to

345° F

:: Ribbed and flexible with longitudinal

split for ease of cable insertion

:: For indoor/work area use

:: Holds groups of cables in place while

offering protection against abrasion

and crushing

:: Remains closed while bent or twisted

Inside Diameter Length (ft/bag) Part Number

1/4" 100 558299-1

3/8" 100 558299-2

1/2" 100 558299-3

5/8" 50 558299-4

3/4" 50 558299-5

1" 50 558299-6

1-1/4" 25 558299-7

1-5/8" 25 558299-8

Split Loom

Product Facts

:: Fast economical way to bundle cables

:: Protects from abrasion while holding

cables in place

:: For indoor/work area use unless

otherwise indicated

:: SPIRAP Hand Tool included with each

box to simplify installation

:: Maximum Temperature Range:

··· Natural Polyethylene – 215° F

··· Flame Retardant Polyethylene –

200° F

··· Natural Nylon – 250° F (at 3000

hours)

··· TEFLON – 500° F

··· Outdoor Polyethylene – 215° F

··· Outdoor Nylon – 200° F (at 700

hours)

SPIRAP Spiral Plastic Tubing

Spirap Tool


CA

BL

E A

SS

EM

BL

IES


157

CABLE ASSEMBLIES

Cable AssembliesFiber Optic Cable Assemblies .....................................158-162

MT-RJ to MT-RJ ..................................................................158

MT-RJ to SC .........................................................................158

MT-RJ to ST-Style...............................................................159

MT-RJ to LC..........................................................................159

SC to SC ................................................................................159

SC to ST-Style......................................................................160

SC to LC.................................................................................160

ST-Style to ST-Style............................................................160

LC to LC .................................................................................160

MT-RJ Pigtail Jack..............................................................161

MT-RJ Pigtail Plug ..............................................................161

SC Pigtail Cable Assemblies ...........................................161

MT-RJ OTDR Test Assemblies .......................................161

MT-RJ Loopbacks ..............................................................162

MT-RJ Test Kits ...................................................................162

Replacement Component for MT-RJ Test Kits .........162

Twisted Pair Cable Assemblies...................................163-167

Category 6............................................................................163

Enhanced Category 5..............................................163-164

Category 5 ..................................................................164-165

Ethernet Crossover ............................................................165

Category 6 6-110XC.........................................................166

Category 6, RJ45 to 6-110XC.......................................166

Enhanced Category 5 110Connect XC ......................167

Enhanced Category 5 RJ45 to 110Connect XC .....167

Chapter Summary

:: A complete line of cable

assemblies for any

communications scenario

:: Factory-terminated and tested

:: Manufactured using quality

AMP NETCONNECT cables and

connectors

:: Fiber optic assemblies available in

50/125µm, XG and 62.5/125µm

Multimode and Singlemode

:: Fiber optic connector styles include

MT-RJ, SC, ST-Style and LC

:: Optical fiber cable assemblies

feature connectors with ceramic

ferrules

:: Twisted pair cable assemblies are

available in Category 6, 5e and 5

performance in a multitude of

lengths and colors

:: Please call for quotes on

custom assemblies

6

Ch06-CableAssemblies_3-04.qxd 3/15/2004 3:13 PM

CA

BL

E A

SS

EM

BL

IES


158

CABLE ASSEMBLIES

MT-RJ to SC

Product Facts

:: MT-RJ SECURE Plugsmate

withlike-colored MT-RJ

SECURE Jacks only

:: MT-RJ SECURE Assemblies

have one standard MT-RJ Plug

and one MT-RJ SECURE Plug

:: Each MT-RJ connector houses

two fibers

:: Cable assemblies are riser-

rated

Product Facts

:: Connects between equipment

with different interfaces

:: MT-RJ SECURE Plugs mate with

like- colored MT-RJ SECURE

Jacks only

:: MT-RJ SECURE Cable

Assemblies have one standard

duplex SC connector and one

MT-RJ SECURE Plug

:: SC connectors feature ceramic

ferrules

:: Each MT-RJ Connector houses

two fibers

:: Cable assemblies are riser-rated



XG (850nm 50/125µm) Multimode 1693414-XDuplex


MT-RJ to SC Singlemode 1278031-X


Simplex XG (850nm 50/125µm) Multimode 1588573-X



MT-RJ SECURE RED to SC Duplex XG (850nm 50/125µm) Multimode 1754410-X



MT-RJ SECURE YELLOW to SC Duplex XG (850nm 50/125µm) Multimode 1754411-X



MT-RJ SECURE GREEN to SC Duplex XG (850nm 50/125µm) Multimode 1754412-X



MT-RJ SECURE BLUE to SC Duplex XG (850nm 50/125µm) Multimode 1754413-X


X denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -5 = 5, 1- - 0 = 10



XG (850nm 50/125µm) Multimode 1588572-XMT-RJ to MT-RJ


Singlemode 1278033-X


MT-RJ SECURE RED to MT-RJ XG (850nm 50/125µm) Multimode 1754406-X



MT-RJ SECURE YELLOW to MT-RJ XG (850nm 50/125µm) Multimode 1754407-X



MT-RJ SECURE GREEN to MT-RJ XG (850nm 50/125µm) Multimode 1754408-X



MT-RJ SECURE BLUE to MT-RJ XG (850nm 50/125µm) Multimode 1754409-X



Fiber Optic Cable Assemblies

MT-RJ to MT-RJ


CA

BL

E A

SS

EM

BL

IES


159

CABLE ASSEMBLIES

MT-RJ to ST- Style



MT-RJ to ST-Style 62.5/125µm Multimode 1278027-X


50/125µm Multimode 1278881-XMT-RJ SECURE RED to ST-Style


50/125µm Multimode 1278882-XMT-RJ SECURE YELLOW to ST-Style


50/125µm Multimode 1278883-XMT-RJ SECURE GREEN to ST-Style


50/125µm Multimode 1278884-XMT-RJ SECURE BLUE to ST-Style



MT-RJ to LC

SC to SC

Product Facts

:: Connects between equipment

with different interfaces

:: MT-RJ SECURE Plugs mate with

like-colored MT-RJ SECURE

Jacks only

:: MT-RJ SECURE Assemblies have

two standard ST-Style

connectors and one

MT-RJ SECURE Plug

:: ST-Style connectors feature

ceramic ferrules

:: Each MT-RJ connector houses

two fibers


Product Facts

:: Connects between equipment with

different interfaces

:: One Duplex LC connector and one

MT-RJ plug

:: LC connectors feature ceramic

ferrules

:: Cable Assemblies are riser-rated

:: Each MT-RJ connector houses two

fibers

Product Facts


:: Connector features ceramic ferrules



MT-RJ to LCXG (850nm LO 50/125µm) Multimode 1588719-X



X denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -5 = 5, 1- -0 = 10


50/125µm Multimode 504969-Y

SC to SC DuplexXG (850nm 50/125µm) Multimode 1588644-X

62.5/125µm Multimode 504971-Y

Singlemode 492019-Y

X denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -5 = 5, -1- - 0 = 10,

Y denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -4 = 5, -5 = 10


CA

BL

E A

SS

EM

BL

IES


160

CABLE ASSEMBLIES

ST- Style to ST- Style

SC to ST- Style

Product Facts




:: Connectors feature ceramic ferrules

Product Facts





SC to ST-Style Duplex 62.5/125µm Multimode 504958-Y

Singlemode 492020-Y

X denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -5 = 5, 1- - 0 = 10,



Multimode 50/125µm 1278207-X

ST-Style to ST-Style Duplex Multimode 62.5/125µm 503995-Y

Singlemode 503162-X



SC to LCProduct Facts







SC to LC DuplexXG (850nm LO 50/125µm) Multimode 1754384-X




LC to LCProduct Facts





LC to LC DuplexXG (850nm LO 50/125µm) Multimode 1754399-X





CA

BL

E A

SS

EM

BL

IES


161

CABLE ASSEMBLIES

MT-RJ OTDR Test Assemblies Product Facts

:: For use in testing with an OTDR test

set

:: All assemblies are 100m in length

:: For XG fiber testing, use standard

50/125µm Multimode products


50/125µm Multimode 1588080-1MT-RJ to SC Simplex Launch Lead

62.5/125µm Multimode 1588079-1

50/125µm Multimode 1588078-1MT-RJ to ST-Style Launch Lead

62.5/125µm Multimode 1588077-1

MT-RJ Pigtail Jack (Single-Ended) Cable Assemblies

Product Facts

:: Compatible with MT-RJ Jack Snap-

in Adapter Plates

::: 250µm coated fiber in protective

900µm tubing

:: MT-RJ Jack Assemblies are

compatible with fusion or

mechanical splices


fibers



MT-RJ Jack 62.5/125µm Multimode Beige 1374019-X


Red 1588568-X

MT-RJ SECURE Jack SinglemodeYellow 1588569-X

Green 1588571-X

Blue 1588570-X

X denotes length in meters: -1 = 1, -2 = 2, -3 = 3

MT-RJ Pigtail Plug (Single-Ended) Cable Assemblies

Product Facts

:: Compatible with MT-RJ Plug Snap-in

Adapter Plates

:: 250µm coated fiber in protective

900µm tubing

:: MT-RJ Plug Assemblies are

compatible with fusion or mechanical

splices

:: MT-RJ Plugs are pinned


fibers



MT-RJ Plug 62.5/125µm Multimode 1693532-X



SC Pigtail (Single-Ended) Cable Assemblies Product Facts

:: Compatible with SC Snap-in Adapter

Plates



900µm tubing

:: Compatible with fusion or

mechanical splices


Simplex SC - APC 3.0mm Jacketed 492193-X

SinglemodeSimplex SC - UPC

3.0mm Jacketed 492081-X

900µm Buffered 492065-X


LC Pigtail (Single-Ended) Cable Assemblies Product Facts

:: Compatible with LC Snap-in Adapter

Plates



900µm tubing

:: Compatible with fusion or

mechanical splices


50/125µm Multimode 1754404-1

LC Simplex, 1m 2.0mm JacketedXG (850nm LO 50/125µm) Multimode 1754402-1

62.5/125µm Multimode 1754400-1

Singlemode 1754401-1


CA

BL

E A

SS

EM

BL

IES


162

CABLE ASSEMBLIES

Product Facts

:: Each Test Kit includes:

•1 - MT-RJ Adapter

•2-MT-RJ(nopins)toSCSimplex

or ST-Style Cable Assemblies

• 1 - MT-RJ (with pins) to SC Simplex

or ST-Style Cable Assembly

• 1 - MT-RJ to MT-RJ Cable Assembly

•2 - Mandrels (not included

with Singlemode Kit)

•1 - Carrying case

:: Test Kits for MT-RJ SECURE

Connector Systems also available

(see

“MT-RJ OPTICAL FIBER SYSTEMS

TESTING” White Paper, available on-

line at www.ampnetconnect.com for

details)



MT-RJ Test Kits


50/125µm Multimode 1278861-2

MT-RJ to ST-Style 62.5/125µm Multimode 1278862-2


50/125µm Multimode 1278861-1

MT-RJ to SC 62.5/125µm Multimode 1278862-1


Replacement Components for MT-RJ Test Kits

Product Facts


:: Pinned MT-RJ cable assemblies are

used for testing only




Description To Part Number

50/125µm Multimode 1435096-2

Pinned MT-RJ 62.5/125µm Multimode 1435096-1


50/125µm Multimode 1435092-2

Unpinned MT-RJ SC 62.5/125µm Multimode 1435092-1


50/125µm Multimode 1435094-2

ST-Style 62.5/125µm Multimode 1435094-1


50/125µm Multimode 1435096-5



50/125µm Multimode 1435092-5

Pinned MT-RJ SC 62.5/125µm Multimode 1435092-4


50/125µm Multimode 1435094-5



MT-RJ Loopbacks


50/125µm Multimode 1278357-1

MT-RJ Loopback 62.5/125µm Multimode 1278153-1


Product Facts




CA

BL

E A

SS

EM

BL

IES


163

CABLE ASSEMBLIES

Product Facts

:: Exceed Category 6 performance

standards

:: 4-Pair stranded UTP,

24 AWG conductors

:: Non-Plenum

:: Color-matched snagless boots

:: Universal wiring (T568A/T568B)

Color Part Number

Black 219884-X

Gray 219885-X

Blue 219886-X

Green 219887-X

Red 219888-X

White 219889-X

Yellow 219890-X

Orange 219891-X

Violet 1499023-X

Category 6

Product Facts

:: Exceed Category 5e performance

standards


24 AWG conductors

:: Non-Plenum



Enhanced Category 5, Booted

X denotes length in feet

-2 2 1- -2 12

-3 3 1- -4 14

-4 4 1- -5 15

-5 5 1- -6 16

-6 6 2- -0 20

-7 7 2- -5 25

-8 8 3- -0 30

-9 9 4- -0 40

1- -0 10 5- -0 50

Color Part Number

Black 406483-X

Gray 219241-X

Blue 219242-X

Green 219243-X

Red 219244-X

White 219245-X

Yellow 219246-X

Orange 219184-X

Violet 1499094-X


-2 2 1- -2 12

-3 3 1- -4 14

-4 4 1- -5 15

-5 5 1- -6 16

-6 6 2- -0 20

-7 7 2- -5 25

-8 8 3- -0 30

-9 9 4- -0 40

1- -0 10 5- -0 50


CA

BL

E A

SS

EM

BL

IES


164

CABLE ASSEMBLIES

Category 5 Unshielded, BootedProduct Facts

:: Exceed Category 5



24 AWG conductors

:: Non-Plenum



Color Part Number

Black 219200-X

Gray 219197-X

Blue 219198-X

Green 219199-X

Red 219201-X

White 219202-X

Yellow 219203-X

Orange 219214-X

Product Facts


standards


24 AWG conductors

:: Non-Plenum


Color Part Number

Black 1499110-X

Gray 1499111-X

Blue 1499112-X

Green 1499113-X

Red 1499114-X

White 1499115-X

Yellow 1499116-X

Orange 1499117-X

Violet 1499118-X

Enhanced Category 5, Bootless


-2 2 1- -2 12

-3 3 1- -4 14

-4 4 1- -5 15

-5 5 1- -6 16

-6 6 2- -0 20

-7 7 2- -5 25

-8 8 3- -0 30

-9 9 4- -0 40

1- -0 10 5- -0 50


-1 1 1- -0 10

-2 2 1- -2 12

-3 3 1- -4 14

-4 4 1- -5 15

-5 5 1- -6 16

-6 6 2- -0 20

-7 7 2- -5 25

-8 8 3- -0 30

-9 9 5- -0 50


CA

BL

E A

SS

EM

BL

IES


165

CABLE ASSEMBLIES

Category 5 Unshielded, Bootless

Product Facts




24 AWG conductors

:: Non-Plenum


Color Part Number

Black 219207-X

Gray 219152-X

Blue 219205-X

Green 219206-X

Red 219208-X

White 219159-X

Yellow 219204-X

Orange 219215-X

Category 5 Shielded

PART NUMBER 557827-XProduct Facts



:: 4-Pair stranded STP,

26 AWG conductors

:: Non-Plenum

:: Black cable and snagless boots


Ethernet Crossover Cable Assemblies

Performance Cable/Boot Color Part Number

Category 6 Red/Black 1499150-X

Category 5e White/Black 1499151-X

Category 5 Orange/Black 219153-Y

X denotes length in feet: -3 = 3, -5 = 5, 1- -0 = 10, 1- -2 = 12, 1- -5 = 15

Y denotes length in feet: -1 = 3, -2 = 12, -3 = 5, -4 = 10


-1 1 1- -0 10

-2 2 1- -2 12

-3 3 1- -4 14

-4 4 1- -5 15

-5 5 1- -6 16

-6 6 2- -0 20

-7 7 2- -5 25

-8 8 3- -0 30

-9 9 5- -0 50


-1 2 -6 16

-2 4 -7 20

-3 6 -8 10

-4 8 -9 75

-5 12 1- -0 50

Product Facts

:: Category 5e and Category 5

crossover cables are compatible with

IEEE 802.3 10/100BASE-T

:: Category 6 crossover cables are

compatible with 10/100BASE-T, as

well as IEEE 802.3 1000BASE-T

:: See Customer Drawings for wiring

diagrams


CA

BL

E A

SS

EM

BL

IES


166

CABLE ASSEMBLIES

Category 6, 6-110XC

Product Facts


requirements

:: 4-Pair stranded UTP, 24 AWG

conductors

:: Non-Plenum


1-Pair 1479265-X

2-Pair 1479266-X

4-Pair 1479267-X

X denotes length in feet: -2 = 2, -4 = 4, -6 = 6, -8 = 8, 1- -0 = 10

Category 6, RJ45 to 6-110XC

Product Facts


requirements

:: 4-Pair stranded UTP, 24 AWG

conductors

:: Non-Plenum


4-Pair T568A 1499414-X

4-Pair T568B 1499413-X

X denotes length in feet: -2 = 2, -4 = 4, -6 = 6, -8 = 8, 1- -0 = 10


CA

BL

E A

SS

EM

BL

IES


167

CABLE ASSEMBLIES

Enhanced Category 5, 110Connect XCProduct Facts

:: Exceed Category 5e



24 AWG conductors

:: Non-Plenum


110Connect XC to 110Connect XC


1-Pair 569523-X

2-Pair 569524-X

3-Pair 569525-X

4-Pair 569526-X

X denotes length in feet: -2 = 2, -4 = 4, -6 = 6, -8 = 8, 1--0 = 10

Enhanced Category 5, RJ45 to 110Connect XC

Product Facts


requirements


24 AWG conductors

:: Non-Plenum

:: Modular RJ45 Plugs feature

color-matched snagless boots

:: Wiring pattern of cable assemblies

must be selected to match work

area outlet wiring

RJ45 to 110Connect XC


4-Pair T568A 569527-X

4-Pair T568B 569528-X

2-Pair T568A, 10BASE-T 569685-X

2-Pair T568B, 10BASE-T 569669-X

2-Pair T568A, TOKEN RING 569686-X

2-Pair T568B, TOKEN RING 569672-X

2-Pair T568A, ATM/PMD 569687-X

2-Pair T568B, ATM/PMD 569673-X

X denotes length in feet: -2 = 2, -4 = 4, -6 = 6, -8 = 8, 1---0 = 10


CA

BL

E A

SS

EM

BL

IES


168

CABLE ASSEMBLIES


CO

NN

EC

TO

RS


169

CONNECTORS

Fiber Optic Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . .170-180

Fiber Optic Connectors . . . . . . . . . . . . . . . . . . . . . . . .170-178

No Epoxy, No Polish Connectors . . . . . . . . . . .170 - 174

MT-RJ Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

MT-RJ SECURE Jacks . . . . . . . . . . . . . . . . . . . . . . . . .172

LightCrimp Plus Singlemode Connectors . . . . . .173

LightCrimp Plus Multimode Connectors . . . . . . .174

No Epoxy, Polish Connectors . . . . . . . . . . . . . . . . . . . .175

LightCrimp Connectors . . . . . . . . . . . . . . . . . . . . . . . .175

Epoxy, Polish Connectors . . . . . . . . . . . . . . . . . . .176-178

Simplex SC Connectors . . . . . . . . . . . . . . . . . . . . . . .176

Duplex SC Connectors . . . . . . . . . . . . . . . . . . . . . . . .177

ST-Style Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .178

LC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

Fiber Optic Adapters and Splices . . . . . . . . . . . . . .179-180

MT-RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

SC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

SC to ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

CORELINK Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

Twisted Pair Plugs and Accessories . . . . . . . . . . . . . .181-184

High Performance 8-Position Modular Plugs . . . . . . . .181

Category 6 Modular Plugs and Boots . . . . . . . . . . . .181

Category 5e and 5 Modular Plugs . . . . . . . . . . . . . . . .181

Category 3 Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . .182

Category 3, 5e 8-Position Modular Plug Boots . . . . . .183

External Strain Relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

110Connect XC Cross-Connect Plugs . . . . . . . . . . . . . .183

CHAMP Telco Connectors and Accessories . . . . . . . . .184

Category 3 25-Pair Connector Kits . . . . . . . . . . . . . . .184

Ratcheted Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . .184

CHAMP Category 3 Telco Adapters . . . . . . . . . . . . . .184

Chapter Summary

:: Tyco Electronics offers one of

the broadest assortments of

connectors in the world and is

continually introducing new

products. If you don’t see

what you need in this catalog,

please contact Tyco

Electronics Technical Support

at 1-800-522-6752.

:: SL Series and 110Connect

Jacks are shown in the Work

Area Outlets section

7

Ch07-Connectors_3-04.qxd 3/15/2004 3:20 PM

NO

EP

OX

Y, N

O P

OL

ISH

CO

NN

EC

TO

RS


170

CONNECTORS

MT-RJ Fiber Optic Connector System

Product Facts


:: Half the size of SC Duplex and

ST-Style connectors


separate coupler

:: MT-RJ patch cords on pages 158-159

Strip

Easy 3-Step Termination

Cleave Lock

Description Jack Color Part Number


XG (850nm LO 50/125µm) Multimode Gray 1-1278414-2


X denotes housing color:-1=Almond,-2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue,

-7=Red, -8=Yellow,-9=Green, 1- - 0=Violet, 1- -1=Electrical Ivory

MT-RJ Outlet Jacks

62.5/125µmMultimode

50/125µmMultimode

XG (850nm LO50/125µm)Multimode

Product Facts


:: MT-RJ Outlet Jacks include:

... Actuation tool

... Bend-limiting boot

... SL Series compatible housing


:: Tunable



:: For 900µm tight-buffered termination


NO

EP

OX

Y, N

O P

OL

ISH

CO

NN

EC

TO

RS


171

CONNECTORS

MT-RJ Patch Panel Jacks

Description Color Used With Part Number

50/125µm Multimode Black250µm Coated Fiber 1278303-1

900µm Tight Buffered Fiber 1588880-1

XG (850nm LO 50/125µm) Multimode Gray250µm Coated Fiber 1278303-4


62.5/125µm Multimode Beige250µm Coated Fiber 1278303-2


Pack of six

Note: Bend Limiting Boots purchased separately.

50/125µm Multimode

62.5/125µm MultimodeXG (850nm LO 50/125µm) Multimode

Product Facts


:: MT-RJ Patch Panel Jack packages

include:

... 6 - MT-RJ Jacks

... 2 - Actuator tools

... 1 - Fiber guide

... 1 - Icon wheel

:: Bend Limiting boots available on

page 123



:: Tunable



NO

EP

OX

Y, N

O P

OL

ISH

CO

NN

EC

TO

RS


172

CONNECTORS

MT-RJ SECURE Optical Fiber Cabling System

The MT-RJ SECURE Optical Fiber Cabling System offers all the

features and benefits of the standard MT-RJ System with an extra

advantage for network security. Today’s facilities often employ

more than one network and need a measure of mechanical security

to limit access and prevent inadvertent cross-connection.

MT-RJ SECURE products feature molded slots on the plug and

molded keys on the latching jack to reduce the chance of

unauthorized connections. There are four key-slot combinations -

each color-coded - to assist identification of the correct jack. Simply

stated, the plug and jack colors must match or the keying will

prevent them from carrying the signal.

The MT-RJ SECURE plugs won't even mate with standard MT-RJ

jacks - only the correct, same-color jacks.

The MT-RJ SECURE components have the same form as the

standard MT-RJ products, so they fit into conventional RJ-45

faceplates and patch panel cutouts and use the same installation

tools and procedures. Plugs, jacks and cable assemblies are all

available for a complete end-to-end solution for your 50-micron,

62.5-micron XG (850nm LO 50-micron) and single-mode systems.

Description Used With Part Number

50/125µm Multimode 900µm Tight-Buffered Fiber 1278811-X

XG (850nm LO 50/125µm) Multimode 900µm Tight-Buffered Fiber 1754252-X

62.5/125µm Multimode 900µm Tight-Buffered Fiber 1278810-X

X denotes jack color:-1=Red,-2=Yellow, -3=Green, -4=Blue

SL Series housing color matches jack color.

Other housing colors available.

MT-RJ SECURE Outlet JacksProduct Facts




separate coupler

:: MT-RJ SECURE System offers color-

coded, mechanically keyed jacks and

plugs to limit access to secure

networks

:: MT-RJ SECURE Outlet Jacks include:

... Actuation tool

... Bend-limiting boot

... SL Series compatible housing

:: MT-RJ SECURE Patch Panel Jack

packages include:

... 6 - MT-RJ SECURE Jacks

... 2 - Actuator tools

... 1 - Fiber guide

... 1 - Icon wheel

:: Half the size of SC Duplex and ST-

Style connectors

:: MT-RJ SECURE patch cords on pages

158-159


:: Tunable


MT-RJ SECURE Patch Panel Jacks

Description Used With Part Number

50/125µm Multimode250µm Coated Fiber 1278807-X

900µm Tight-Buffered Fiber 1588879-X

XG (850nm LO 50/125µm) Multimode250µm Coated Fiber 1693951-X


62.5/125µm Multimode250µm Coated Fiber 1278808-X


X denotes jack color:-1=Red,-2=Yellow, -3=Green, -4=Blue

Pack of six

Note: Bend Limiting Boots purchased separately, see page 123.


NO

EP

OX

Y, N

O P

OL

ISH

CO

NN

EC

TO

RS


173

CONNECTORS

LightCrimp Plus SinglemodeProduct Facts

:: No epoxy, no polish, no curing

:: Strip, cleave and crimp

:: Easiest, and quickest fiber

termination available

:: Ceramic ferrules

:: Compliant with TIA/EIA, 568B.3

:: Termination tool kits on page 228


Simplex SC 1693276-1

Duplex SC 1693278-1

Terminate to: 250µm coated fiber, 900µm tight buffered

fiber, 900µm easy strip or semi-tight buffered fiber, 900

breakout kit.


NO

EP

OX

Y, N

O P

OL

ISH

CO

NN

EC

TO

RS


174

CONNECTORS

LightCrimp Plus Multimode

SC

ST-Style

Product Facts

:: No epoxy, no polish, no curing

:: Strip, Cleave and crimp

:: Easiest, and quickest fiber

termination available

:: Ceramic ferrules


:: Termination tool kits on page 228

:: XG connector housings are grey for

identification

:: Each connector comes with

accessories needed to terminate to

900µm, 250µm Bare Buffer and

3mm cables


50/125µm Multimode 1278079-1

Simplex SC XG (850nm LO 50/125µm) Multimode 1588291-1

62.5/125µm Multimode 492643-1

50/125µm Multimode 1278080-1

Duplex SC XG (850nm LO 50/125µm) Multimode 1588292-1

62.5/125µm Multimode 1278009-1

ST-Style50/125µm Multimode 1278082-1

62.5/125µm Multimode 492642-1


Ceramic Ferrule

NO

EP

OX

Y, P

OL

ISH

CO

NN

EC

TO

RS


175

CONNECTORS

Product Facts

:: No epoxy, no curing

:: Strip, cleave, crimp and polish


:: Consistent performance over a wide

range of temperatures

:: Termination tool kits on

pages 229

:: Each connector comes with

accessories needed to terminate to

900µm, 250µm Bare Buffer and 3mm

cables

:: Multimode connectors suitable for

use with 50/125µm, 62.5/125µm

XG (850nm LO 50/125µm) fiber

LightCrimp

SC

ST-Style

Stainless Steel Ferrule


Simplex SC Multimode, Ceramic Ferrule 503692-1

Duplex SC Multimode, Ceramic Ferrule 503693-1

Multimode, Stainless Steel Ferrule 504034-1

ST-Style Multimode, Ceramic Ferrule 504001-1

Singlemode, Ceramic Ferrule 504000-1


EP

OX

Y, P

OL

ISH

CO

NN

EC

TO

RS


176

CONNECTORS

Simplex SC

One-Piece

Product Facts

:: Epoxy, polish

:: Pre-radiused ferrules

:: Durability of multimode connectors:

500 cycles

:: Durability of singlemode connectors:

200 cycles

:: Termination Tool Kits on pages 229

and 230

:: Multimode connectors suitable for use

with 50/125µm, 62.5/125µm XG

(850nm LO 50/125µm) fiber

Description Connector Type Ferrule Type Housing/Boot Color Boot Configuration Part Number

Bare Buffer 900µm, 3.0mm Loose-jacketed 504646-7

SinglemodeOne-Piece Ceramic

Blue/Blue3.0mm Loose-jacketed 504646-2

Bare Buffer 900µm 492123-3

Two-Piece Ceramic 3.0mm Loose-jacketed 504647-2

Beige/Beige Bare Buffer 900µm, 3.0mm Loose-jacketed 503948-5

MultimodeOne-Piece Ceramic Beige/Beige 3.0mm Loose-jacketed 503948-1

Beige/Black Bare Buffer 900µm 504932-1

Two-Piece Ceramic Beige/Beige 3.0mm Loose-jacketed 504909-1

Two -Piece

Product Facts

:: Two-piece connectors are tunable


EP

OX

Y, P

OL

ISH

CO

NN

EC

TO

RS


177

CONNECTORS

Duplex SC

One-Piece

Two -Piece

Product Facts

:: Epoxy, polish


:: Termination Tool Kits on pages 228

and 230

:: Multimode connectors suitable for

use with 50/125µm, 62.5/125µm

XG (850nm LO 50/125µm) fiber

Description Housing/Boot Color Connector Type Ferrule Type Boot Configuration Part Number

3.0mm Loose-jacketed 504655-1

Singlemode Blue/BlueOne-Piece Ceramic



Bare Buffer 900µm, 3.0mm Loose-jacketed 504657-5

Multimode Beige/BeigeOne-Piece Ceramic 3.0mm Loose-jacketed 504657-1



Product Facts

:: Two-piece connectors are tunable


EP

OX

Y, P

OL

ISH

CO

NN

EC

TO

RS


178

CONNECTORS

ST- StyleProduct Facts

:: Epoxy, polish


:: Maximum jacket

diameter: 3.0mm

:: Termination Tool Kits on pages 229-

230


with 50/125µm, 62.5/125µm XG


Fiber Type Ferrule Type Body Coupling Nut Boot Type & Color Part Number

Zinc 900µm 503613-2

Singlemode Ceramic Nickel-plated BrassDie Cast

Bend-Limiting, Yellow 502579-2

Short, Yellow 502580-3

Polymer Polymer Short, Black, 900µm 503571-3

Multimode CeramicNickel-plated Brass Die Cast

Bend-Limiting, Black 492458-1

Short, Black 1-501380-6

Product Facts

:: Epoxy, polish


:: Maximum jacket diameter: 3.0mm

:: Termination Tools on page 230

:: Duplex connectors come with duplex

clip


with 50/125µm, 62.5/125µm XG


Description Fiber Type Ferrule Type Housing Color Termination Part Number

SimplexSinglemode Zirconia/Metal Blue 900µm Buffer 1588710-1

Multimode Zirconia/Metal Beige 900µm Buffer 1588706-1

DuplexSinglemode Zirconia/Metal Blue 900µm Buffer 1588712-1

Multimode Zirconia/Metal Beige 900µm Buffer 1588708-1

LC


FIB

ER

OP

TIC

AD

AP

TE

RS


179

CONNECTORS

MT-RJ To MT-RJ Fiber Optic AdaptersPART NUMBER 1278017-1

Product Facts

:: Suitable for any SC connector

:: Available in multimode

or singlemode

:: Duplex adapters accept simplex or

duplex connectors

:: Mounting screws available


SC Duplex Multimode Beige 504640-1

SC Simplex Multimode Beige 504614-1

SC Duplex Singlemode Blue 1-502776-1

SC Simplex Singlemode Blue 502632-8

SC to SC Adapters


SC to ST-Style Duplex Multimode Beige 504663-4

SC to ST-Style Simplex Multimode Beige 502780-3

SC to ST-Style Duplex Singlemode Blue 503137-5

SC to ST-Style Simplex Singlemode Blue 502780-2

SC to ST- Style Adapters

Product Facts

:: Suitable for any SC or

ST-Style connector


or singlemode

:: Duplex adapters accept simplex or

duplex connectors


Product Facts

:: Suitable for Singlemode/ Multimode

MT-RJ Plugs

Adapters

Simplex Duplex

Simplex Duplex

Product Facts

:: Suitable for any ST-Style connector


or singlemode

:: Duplex adapters accept four simplex

ST-Style connectors


for duplex adapter

ST- Style to ST- Style Adapters


MultimodeST-Style Duplex Beige 504662-2

ST-Style Simplex Metallic 501381-1

ST-Style Duplex Blue 503273-5

Singlemode ST-Style Simplex Metallic 504021-1

ST-Style Simplex Metallic 504021-2*

*Bulk packaging (50).

Simplex Duplex


FIB

ER

OP

TIC

AD

AP

TE

RS

AN

D S

PL

ICE

S


180

CONNECTORS

Product Facts

:: Accommodates 250µm fibers and

900µm buffered fibers

:: Easy to use, reusable

and toolless

:: Splices sold in packs of 12 with 2

actuator keys

Replacement

keys

LC to LC Duplex Adapters


Multimode Beige 1457567-5

Singlemode Blue 1457567-4

Product Facts

:: Available in multimode or

singlemode

:: Duplex adapters accept

simplex or duplex connectors


CORELINK splice Multimode Blue 503901-1

CORELINK splice Singlemode Clear 503577-1

2 Replacement keys in key holder 503681-1

CORELINK Fiber Optic Splices

Mechanical Splices


CA

TE

GO

RY

6, 5

eA

ND

5 M

OD

UL

AR

PL

UG

S


181

CONNECTORS

High Performance, 8-Position Modular Plugs

Category 6, 8-Position Modular Plug Kits

Description AWG Part Number

Solid 24-23 5-1375204-X

Stranded 26-24 5-1375202-X

X denotes quantity per box: -2=500, -3=100, -4=25

Product Facts

:: Plugs accept insulation diameters

between 0.035 and 0.043 inches

and jacket O.D. between 0.20 and

0.24 inches

:: Category 6 modular plug tooling on

page 241

:: Each kit includes:

... 1 - Modular plug assembly

... 1 - Wire holder

... 1 - Strain relief

Category 5e and 5 Modular Plugs

Description AWGInsulation O.D. Cable Jacket O.D. Conductor Part Number

in (mm) in (mm)

Unshielded24 <= 0.039 (0.99) 0.190 (4.83) – 0.220 (5.59) Stranded 5-558530-X

28 – 24 0.035 (0.89) – 0.039 (0.99) 0.190 (4.83) – 0.200 (5.08) 5-569278-X

Shielded 26 – 24 0.035 (0.89) – 0.039 (0.99) 0.190 (4.83) – 0.200 (5.08)Stranded 5-569552-X

Solid 5-569550-X

X denotes quantity per box: -2=500, -3=100, -4=25

Product Facts

:: Exceed TIA and ISO 11801

requirements for component

performance

:: Modular plug tooling on

pages 241 and 242

:: Modular plug boots on page 183


··· Plug housing

··· Load bar

:: Load bar helps maintain pair

twist

:: Shielded Modular Plugs are

Lead-free

Product Facts

:: For use with Category 6,

8-Position Modular plugs

:: Accept cables with a

maximum diameter of

0.23 inches (6.0 mm)

Modular Plug Boots for Category 6 PlugsPART NUMBER 737893-X

X denotes color:

1- -1 White

1- -2 Gray

1- -3 Red

1- -4 Blue

1- -5 Green

1- -6 Yellow

1- -7 Black

1- -8 Orange

1- -9 Violet

2- -0 Brown


CA

TE

GO

RY

3 M

OD

UL

AR

PL

UG

S


182

CONNECTORS

Category 3 Modular PlugsProduct Facts

:: Accommodate conductors as listed

:: Modular plug tooling on

pages 241 and 242

:: Shielded Modular Plugs are Lead-free

Unshielded

Pos. Keying BodyType CableType AWG Insulation O.D.in (mm) Cable Jacket O.D.in (mm) Qty. Per Box Part Number

Standard Round 28-26 0.035 (0.89) max. 0.180 (4.58) max. 100* 5-554710-3

6 Unkeyed Long Round 28-26 0.029 (0.74) - 0.039 (0.99) 0.180 (4.58) max. 100* 5-555177-3

Standard Flat Oval 28-26 0.029 (0.74) - 0.039 (0.99) 0.090 (2.29) x 0.260 (6.61) max. 100* 5-641337-3Stranded

Keyed Standard Round 28-26 0.029 (0.74) - 0.039 (0.99) 0.210 (5.33) max. 100* 5-554170-3

8 UnkeyedStandard Round 28-26 0.029 (0.74) - 0.039 (0.99) 0.210 (5.33) max. 100* 5-554169-3

Long Flat Oval 28-26 0.035 (0.89) - 0.039 (0.99) 0.100 (2.54) x 0.350 (8.89) max. 100* 5-554739-3

6Unkeyed

Standard Flat Oval 26-24 0.035 (0.89) - 0.039 (0.99) 0.090 (2.29) x 0.260 (6.61) max. 100* 5-555042-3

Long Round 26-24 0.039 (0.99) max. 0.195 (4.96) max. 100* 5-555426-3

Solid8 Unkeyed

Standard Flat Oval 26-24 0.035 (0.89) - 0.039 (0.99) 0.100 (2.54) x 0.350 (8.89) max. 100* 5-554720-3

Long Round 26-24 0.029 (0.74) - 0.039 (0.99) 0.200 (5.08) 100* 5-557315-3

Keyed Standard Flat Oval 26-24 0.039 (0.99) max. 0.090 (2.29) x 0.345 (8.76) max. 500 5-555417-2

Shielded

Long Flat Oval 28-26 0.029 (0.74) - 0.039 (0.99) 0.110 (2.79) x 0.270 (6.85) max. 1000 5-555174-2

Long Round 28-26 0.029 (0.74) - 0.039 (0.99) 0.180 (4.58) max. 100* 5-555175-3Stranded 6 Unkeyed

StandardFlat Oval 28-24 0.029 (0.74) - 0.039 (0.99) 0.110 (2.79) X 0.355 (9.02) max. 100 5-569542-3

Round 28-24 0.029 (0.74) - 0.039 (0.99) 0.200 (5.08) 100 5-569532-3

Solid 8 Unkeyed Standard Round 26-24 0.029 (0.74) - 0.039 (0.99) 0.200 (5.08) 100 5-569530-3

*Note: 10 Boxes per Carton.

8-Position,Round, Standard

6-Position,Round, Standard

6-Position,Round, Long

6-Position,Flat, Standard

8-Position,Flat, Standard

Shielded 8-PositionRound, Standard


MO

DU

LA

R P

LU

G A

CC

ES

SO

RIE

S A

ND

XC

PL

UG

S


183

CONNECTORS

Field Terminable 110Connect XCPatch Plugs

Product Facts

:: Metal strain relief that positively

engages plug housing

:: Pro-Crimper Tool and Die Set

on page 241

:: For use with 8-position Category 3, 5

and 5e Modular Plugs only

Product Facts

:: 24-26 AWG stranded conductors

:: Verified for Category 5e performance

:: Available in various pair

combinations

:: Factory-terminated cable assemblies

on page 167


1-Pair 569477-1

2-Pair 569478-1

3-Pair 569479-1

4-Pair 569480-1

External Strain ReliefPART NUMBER 558527-1

Product Facts

:: For use with Category 3, 5, 5e, 8-

position modular plugs

:: Accept cables with a maximum

diameter of 0.210 inches

(5.33 mm)

X denotes color:

-1 Black

-2 Almond

-3 Red

-4 Green

-5 Blue,

-6 Yellow

-7 Orange

-8 White

-9 Violet

1- - 0 Gray

Modular Plug BootsPART NUMBER 569875-X


CH

AM

P 2

5-P

AIR

PL

UG

S A

ND

AC

CE

SS

OR

IES


184

CONNECTORS

Description Hardware Part Number

Plug to Receptacle Wear Adapter - 552705-1

Plug to Plug Adapter with J Hook Hardware 554876-1

Plug to Plug Adapter - 554876-2

Receptacle to Receptacle Adapter with J Hook Hardware 554875-1

Receptacle to Receptacle Adapter - 554875-2

Product Facts

:: Wear adapter (connector saver) —

50-position,plug-to-receptacle

:: Plug-to-plug assembly —

for mating cable ends with

receptacle connectors installed

:: Receptacle-to-receptacle assembly—

formatingcableends with plug

connectors installed

CHAMP Category 3 Telco Adapters

Product Facts

:: Unshielded cable connectors

(50-position) meet FCC

requirements Part 68

and RJ21 for standard

telecommunications interface

:: All unshielded cable-to-cable plugs

kits accept receptacles with integral

latches

CHAMP Category 3 Telco Connectors

25-Pair, Unshielded Connector Kits

Snap-on Cable Clamp


Screwlock hardware, snap-on cable clamp Black 229912-1

CHAMP Plug Screwlock hardware, snap-on cable clamp Gray 229912-4

CHAMP-LOK hardware, ratcheted cable clamp Gray 553913-1

Screwlock hardware, snap-on cable clamp Black 229913-1

Screwlock hardware, snap-on cable clamp Gray 229913-4

CHAMP Receptacle Integral latches, ratcheted adjustable cable clamp Gray 554547-2

Integral latches, snap-on cable clamp Gray 554905-1

CHAMP-LOK hardware, ratcheted cable clamp Gray 553912-1

Ratcheted Cable Clamp


FIL

TE

RS

, BA

LU

NS

& A

DA

PT

ER

S


185

FILTERS, BALUNS & ADAPTERS

Filters, Baluns and AdaptersToken Ring Media Filters and Adapters ............................186

IBM AS/400 Baluns ................................................................186

IBM 3270 Baluns......................................................................187

4-Position Data Connector.....................................................187

10/100BASE-Tx Impedance Matching Adapters.........188

Thinnet (10BASE2) Baluns....................................................188

Chapter Summary

:: Token ring media filters adapt

STP (Type 1) network interface

cards to UTP cable

:: Baluns adapt coaxial and twin-

axial equipment to twisted pair

cables

:: Impedance matching adapters

support 10BASE-T and

100BASE-T applications on

150 Ohm (Type 1) cable

8

FIL

TE

RS

, BA

LU

NS

& A

DA

PT

ER

S


186


Token Ring Media FiltersRJ45 (8-POSITION), PART NUMBER 558281-1

Product Facts

:: Adapt 4 and 16 Mbps STP token

ring cards to UTP cable

:: With 14-foot twisted pair cable

RJ45 to Twin-Ax Plug

Description Active Pin NumbersPart Number

Active Star Hubs Passive Star Hubs

RJ45 Jack to 4 & 5 555249-1 557857-1

Twin-Ax Plug 1 & 2 555249-2 557857-2

Product Facts

:: Adapt AS/400 and System/3X

terminals, emulator cards,

controllers and printers to

UTP cable

:: Choose baluns to match hub type

(active or passive)

IBM AS/400 Baluns

FIL

TE

RS

, BA

LU

NS

& A

DA

PT

ER

S


187


IBM 3270 Baluns

RJ45 to BNC Plug

Description Figure Active Pin Numbers Part Number

RJ45 Plug (8-pos.) to BNC Plug With 14-FootA

4 & 5 555242-1

Twisted Pair Cable 1 & 2 555242-2

RJ45 Jack to BNC Plug B4 & 5 555330-1

1 & 2 555330-2

RJ11 to BNC Plug

Description Figure Active Pin Numbers Part Number

RJ11 Plug (6-pos.) to BNC Plug

with 14-Foot Twisted Pair CableA 3 & 4 555195-1

RJ11 Jack to BNC Plug B 3 & 4 555329-1

Fig. A

Product Facts

:: These baluns are compatible

with IBM 3270 and 3174

Category A devices

Interface Type Part Number

8-Position Modular Jack 555414-1

8-Position Modular Jack 555414-2

4-Position Data Connectorto Modular Jack Adapters

555414-2 Token Ring Wiring555414-1 RJ45 Wiring

Fig. B

FIL

TE

RS

, BA

LU

NS

& A

DA

PT

ER

S


188


Unshielded

Product Facts

:: Used to adapt 100 Ohm

10BASE-T or 100BASE-Tx

equipment to 150 Ohm

shielded cable

:: Available with unshielded or

shielded modular jacks

:: 8-Position jacks

(pins 1, 2, 3 & 6 active)

10/100BASE-Tx Impedance

Matching Adapters

UNSHIELDED, PART NUMBER 558420-1

SHIELDED, PART NUMBER 558421-1

Shielded

Product Facts

:: These 10BASE2 adapters allow

Thinnet coaxial cable segment to

be replaced with up to 350 feet

of twisted pair cable

:: Maximum of 6 devices may be

daisy-chained after the twisted

pair link using standard Thinnet

cable and BNC Tee connectors

:: These baluns are not compatible

with 10BASE-T

Thinnet (10BASE2) Baluns (UTP)

555982-2

Description Active Pin Numbers Part Number

With 14-foot Twisted Pair Cable 1 & 2, 3 & 6 555982-2

LA

BE

LIN

G &

IDE

NT

IFIC

AT

ION


189

LABELING & IDENTIFICATION

Labeling and IdentificationLabeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Standard Labels for Outlets. . . . . . . . . . . . . . . . . . . . . . . . . .190

Label Covers for Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . .191

Universal Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

Labels for Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Label Covers for Patch Panels . . . . . . . . . . . . . . . . . . . . . . . .192

Labels for Cross-Connects . . . . . . . . . . . . . . . . . . . . . . . . . . .193

Label Holders for Cross-Connect Wiring Blocks . . . . . .193

Labels for Cables and Assemblies . . . . . . . . . . . . . . . . . . . .194

Icon Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

Chapter Summary

:: Labeling Software

... TIA/EIA-606-A compliant

... WINDOWS-compatible

... Context-sensitive help

:: Label templates specifically for

AMP NETCONNECT cabling

products

:: User-friendly wizard helps create

identifiers with up to 12

independent elements

:: Labels

... 8.5" X 11" Sheet format

... High-quality card stock and self-

adhesive polyester... Compatible with most printers... Pre-cut or perforated for

faceplates, patch panels,

cross-connects and cable

9

Ch09-Labeling&Identification_3-04.qxd 3/15/2004 3:33 PM

LA

BE

LIN

G &

IDE

NT

IFIC

AT

ION


190


Product Facts

:: Compatible with WINDOWS 95,

98, 2000, WINDOWS NT and

WINDOWS XP

:: Flexible build option to produce

more complex alphanumeric

identifiers

:: Create identifiers consisting of

up to 12 independent segments

:: Can cope easily with the new

TIA/EIA-606-A standard

identification sequences

:: Insert symbols (all standard

WINDOWS symbols can be

used)

:: Save and edit builds

:: Fine tune adjustment

:: Split your label format as

required

:: Job notepad facility for builds

saved to file

:: Justify text

:: Adjust font style and size

:: Context-sensitive help

AMP NETCONNECT Labeling SoftwareVISIT WWW.AMPNETCONNECT.COM/LABELING TO

ORDER, OR DOWNLOAD A FREE 30-DAY TRIAL COPY!

Product Facts

:: Labels are designed to fit

AMP NETCONNECT and similar

faceplates and surface outlets

:: Card stock labels are perforated and

compatible with inkjet and laser

printers

:: Self-adhesive polyester labels are pre-

cut and compatible with laser printers

:: Labels are supplied on

8.5" x 11" sheets

:: For use with:

... 110Connect Faceplates

... SL Series Faceplates

... HIDEAWAY Multimedia Outlet

... WIREMOLD Raceway Faceplates

... Universal Office Box, 6-Port

... Multimedia Security Outlet

... ACO Faceplates

Description Label Size (W x H) Labels per Sheet Part Number

Card Stock 1.98" x 0.373" 72 1375356-X

Self-adhesive Polyester 1.98" x 0.373" 72 1375357-X

X denotes packaging: -1 = 5 sheets (360 labels) per pack, 5- -1 = 100 sheets (7200 labels) per pack

Labels for Work Area

Standard Labels for Outlets


LA

BE

LIN

G &

IDE

NT

IFIC

AT

ION


191


Label Covers for FaceplatesProduct Facts

:: Kit includes fifty die-cut labels

and clear plastic covers

:: For use in SL Series,

110Connect standard and

angled, iconable ACO, and

WIREMOLD compatible

faceplates

:: Can be used in place of clear

label covers provided with SL

Series and Standard and

Angled 110Connect

Faceplates

:: Included with compatible

faceplate kits


Label CoverTransparent 1375345-1

Opaque Color 1479268-X

X denotes color: -1 = Almond, -2 = Black, -3 = White, -4 =

Grey, 1- -1 = Electrical Ivory

Universal Labels

Product Facts

:: AMP NETCONNECT Labeling

Software allows customization

of the universal labels listed for

use with multiple products

:: The Software provides cut lines

to modify the labels for each

particular application

:: Number of labels per package

will vary according to individual

application

Description ApplicationLabels Labels per Package

Part Numberper Sheet 5 Sheets 100 Sheets

Modular Jack Box, 1-Port 216 1080 21600

Modular Jack Box, 2-Port

SL Series Office Box, 2-Port120 600 12000

Self-adhesive Polyester SL Series Office Box, 4-Port 1375358-X

SL Series Furniture Outlet 72 360 36000

SL Series Faceplate, Double Gang

110Connect Office Box, 2-Port and 4-Port 144 720 72000 1375353-X

X denotes packaging: -1 = 5 sheets per pack, 5- -1 = 100 sheets per pack


LA

BE

LIN

G &

IDE

NT

IFIC

AT

ION


192


Labels for Telecommunications Room

Label Covers for Patch Panels


Product Facts

:: Includes twenty-five sheets, four

clear plastic label covers per

sheet

:: For use with Category 6, 5e, 5

and SL Series Multimedia Patch

Panels

:: Included with compatible patch

panels

Labels for Telecommunications Room

Labels for Patch Panels

Product Facts

:: All labels are designed to fit

AMP NETCONNECT Standard and

Angled patch panels

:: AMPTRAC 6-Pack Patch Panels

(Standard or Angled) use part

number 1375353 labels only.

AMPTRAC 4-Pack Patch Panels

(Standard or Angled) accept only

those labels supplied with

AMPTRAC 4-Pack Patch Panels

:: Labels are supplied on 8.5" x 11"

sheets

:: Card stock labels are perforated and

compatible with inkjet and laser

printers

Description Label Size (W x H)Labels Labels per Package


Card Stock 3.10" x 0.50" 36 180 3600 1375351-X

3.10" x 0.50" 36 180 3600 1375352-XSelf-adhesive Polyester

3.30" x 0.25" 72 360 7200 1375353-X


:: Self-adhesive polyester labels

are pre-cut and compatible with

laser printers

:: Special 0.25" high label is

provided for use when icons are

also desired

:: For use with:

... 110Connect Cat 6 Patch

Panels and Mini Patch Panels... 110Connect Cat 5e Patch

Panels and Mini Patch Panels... 110Connect Cat 5 Patch

Panels and Mini Patch Panels... SL Series Multimedia

Patch Panels and Mini Patch

Panels


LA

BE

LIN

G &

IDE

NT

IFIC

AT

ION


193


Labels for 6-110XC and 110Connect

XC Cross-Connect Wiring Blocks

Product Facts

:: Labels are designed to fit the

AMP NETCONNECT 6-110XC

and 110Connect XC Cross-

connect Systems and other

similar products

:: Card stock labels: designed to fit

into standard clear designation

strips, available in TIA/EIA-606-

A compliant colors, perforated,

and compatible with inkjet and

laser printers

:: White self-adhesive polyester

labels: designed for easy

application to the front of the

clear designation strips, pre-cut

and compatible with laser

printers

:: Labels are supplied on

8.5" x 11" sheets

Description Label Size (W x H) Labels per Sheet ColorPart Number

5 Sheets 100 Sheets

White 1375354-1 5-1375354-1

Blue 1375354-2 5-1375354-2

Green 1375354-3 5-1375354-3

Purple 1375354-4 5-1375354-4

Card Stock 7.90" x 0.48" 18 Red 1375354-5 5-1375354-5

Brown 1375354-6 5-1375354-6

Yellow 1375354-7 5-1375354-7

Orange 1375354-8 5-1375354-8

Gray 1375354-9 5-1375354-9

Self-adhesive Polyester 7.90" x 0.48" 18 White 1375355-1* 5-1375355-1*

*Available in white only.Note: 5 Sheets per pack = 90 labels, 100 Sheets per pack = 1800 labels.

Clear Label Holder for 6-110XC and110Connect XC Wiring BlocksPART NUMBER 558417-1

Product Facts

:: Used with 6-110XC and

110Connect XC Cross - connect

systems


LA

BE

LIN

G &

IDE

NT

IFIC

AT

ION


194


Icons

Icon Wheels:: For use with:

··· SL Series Modules on pages 41-42

··· SL Series Furniture Outlets on page 89

··· SL Series Mounting Straps on page 44

··· SL Series Office Boxes on page 45

··· Modular Jack Boxes on page 63

··· 110Connect Faceplates on pages 49-51

··· 110Connect Mounting Straps on page 54

··· Universal Office Boxes on page 57

··· HIDEAWAY Outlet on pages 58-59

··· HIDEOUT Outlet on page 61

··· Iconable ACO Faceplates on pages 68-70

··· FLEX-MODE Electrical Faceplates on pages 65-67

··· MT-RJ Rack Mount Enclosure on page 125

··· MT-RJ Snap-In Adapter Plate on page 122

··· SL Series Category 5E and 6 Patch Panels on

pages 128-129

··· 110Connect Category 5 and 5e Patch Panels

on pages 130-132

··· SL Series Multimedia Jack Patch Panels on

page 135

··· Iconable ACO Patch Panels on page 139

··· MCC Connectivity Panels on pages 203-205

··· And other products as listed in each part’s

Product Facts

Each Wheel Contains: Base Part Number

4 Data, 4 Blank, 2 Phone, 3 Cat 5,558176-X

1 Fax, 1 Modem, 1 Print

4 Blank, 2 Cat 5e, 2 Cat 6,1375092-X

1 each: V1, V2, V3, V4, D1, D2, D3, D4

16 Data 558198-X

16 Phone 558199-X

16 Blank, available in: -1, - 6, - 8, 1- - 0 and 1- -1 only 558821-X

Xdenotescolor: -1 = Almond,-2 = Red,-3 = Green,-4 = Blue,-5 = Yellow,-6 = Black,-7 = Orange,-8 = White,-9 = Violet, -1--0 = Gray,1--1 = ElectricalIvory

Product Facts

:: Labels are designed for use on

cable and cable assemblies

:: Labels are pre-cut and

compatible with laser printers

Description Application Label Size (W X H)Labels Labels per Package


4-Pair Cable 0.984" x 1.496" 48 240 4800 1479002-XSelf-adhesive Polyester

25-Pair Cable 0.984" x 2.480" 24 120 2400 1479003-X


Labels for Cable and Cable Assemblies


AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


195

AMPTRAC CONNECTIVITY SYSTEM

AMPTRAC Connectivity SystemAMPTRAC Connectivity System Introduction . . . . . . . .196

Enterprise Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197

Branch (Mini) Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

Analyzer I/O Cable Assemblies . . . . . . . . . . . . . . . . . . . . . .199

Twisted Pair Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

Patch Panel Retrofic Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

Fiber Optic Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

UTP Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202

Fiber Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203

LAN Electronics Sensor Strips . . . . . . . . . . . . . . . . . . . . . . .204

iTracs Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205

Chapter Summary

:: Reduces downtime and responsetime

:: Integrates network and physicallayer management

:: Helps to increase productivity

:: Reduces network operatingcosts

:: Improves port and assetutilization

:: Provides accurate and timelyinformation

:: Improves service levels

:: Supports Category 6, 5e andfiber optic networks

:: Analyzers sized for enterpriseand branch locations

10

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:37 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


196


The missing link in end-to-end network management.

The AMPTRAC Connectivity Management System turns cabling systems and their connected devices into intelligent

networks by reducing costly and time-consuming manual cable management. With this system, you can track and document

all moves, adds and changes to your network from a centralized location as they occur. This fully automated system optimizes

asset utilization, maintains accurate documentation and helps prevent costly errors.

The AMPTRAC Connectivity Management System’s easy-to-implement hardware coupled with iTRACS cutting-edge software

can be integrated into any new or existing network. By allowing you to proactively respond to any changes in connectivity

through customizable alerts or alarms, the iTRACS software optimizes your network monitoring and security. AMPTRAC

hardware when used in conjunction with iTRACS software provides the missing link that integrates network management

and physical layer management — revolutionizing the way networks are controlled and documented. This one-of-a-kind

infrastructure management system automatically generates a complete physical topology of your network at the

Telecommunications Room/Data Center, while helping you manage and trouble shoot the network, even remotely.

AMPTRAC Connectivity Management System

Product Facts

:: Reduces downtime and

response time

:: Integrates network and

physical layer management

:: Helps to increase productivity

:: Reduces network operating

costs

:: Improves port and asset

utilization

:: Provides accurate and timely

information

:: Improves service levels

:: Supports Cat 5e, Cat 6 and

fiber optic networks

:: Analyze sized for enterprise

and branch locations

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:40 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


197


Product Facts

:: Available in Stand-Alone, Master and Link

versions

:: Available in 1U (1.75") and 6U (10.50")

rack sizes

:: 1U versions can monitor up to 240-ports

:: 6U versions come equipped to monitor up

to 480-ports and can be modified via

expansion slots (6U Analyzer contains 6

expansion slots) to monitor up to 1920-

ports

:: Expansion Boards can monitor up to 240-

ports each and are used with expansion

slots in the 6U Analyzers

:: The maximum number of analyzers that

can be connected concurrently to the

same database via TCP/IP is 1,024

Stand-Alone Analyzers:

:: Used by themselves and do not directly

attach to other Analyzers (Master or Link)

:: Connect to the database software through

a 10BASE-T LAN connection via standard

TCP/IP

Master Analyzers:

:: Connect with up to nine other Link

Analyzers (either 1U, 6U or a combination

of both)

:: Connect to the database software through

a 10BASE-T LAN connection via standard

TCP/IP

:: Will not connect directly with other

Master or Stand-Alone Analyzers

Link Analyzers:

:: Expand Master Analyzer's port capacity

:: Must always be connected with a Master

Analyzer (either a 1U or 6U version)

:: Maximum distance between Master and

Link Analyzer is 50 feet

Enterprise Analyzers

Ports ChannelsFigure Type

PartSizeMonitored Monitored** Number

Stand-Alone 1435370-1

1U (1.75") 240 120 A Master 1435370-2

Link 1435370-3

Stand-Alone 1435371-1*

6U* (10.50") 480-1,920 240-960 B Master 1435371-2*

Link 1435371-3*

Expansion Card 240 120 C - 1435372-1

Link to Master Analyzer Cable, Non-Plenum D - 1435338-X

X denotes length in feet: -4 = 4, -7 = 7, 2- -5 = 25, 5- -0 = 50

Note: The I/O interface for the Enterprise Analyzers is an AMPMODU connector.

* The 6U Analyzer comes equipped with 2 cards (480 ports).

The 6U Analyzer can hold up to eight (8) cards total. Each card is capable of

monitoring 240 ports. Additional Expansion Cards for the 6U Analyzer are

ordered separately.

** The complete channel connection to a work area outlet passes through two

monitored ports, the network equipment (switch) and the patch panel. Therefore,

the number of channels is half the number of ports monitored.

C

B

A

D

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:41 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


198


Description Power Cord Option Part Number

US Version 1591304-1

Branch (Mini) European Version 1591304-2

Analyzer Australian Version 1591304-6

UK Version 1591304-7

Note: The I/O interface for Branch Analyzers is a DB25 connector.

Branch (Mini) Analyzer

Product Facts

:: Provides 128 analyzer ports via

five (5) DB25 connectors and

one (1) RJ45

:: Provides 2 relay outputs for control of

external equipment

:: Provides additional expansion for

relays, sensors, and other functions

via a RS-485 bus to a planned future

expansion unit

:: Local analyzer management provided

via a computer or PDA attached to the

local terminal (console) port

:: Remote analyzer management

provides via a Telnet session.

:: Available with different local power

cord options

:: Suitable for shelve or 19" rack

mounting (1U high)

Back

Front

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:41 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


199


Product Facts

:: The I/O cable is used to connect the

device (patch panel or switch) being

monitored to the analyzer. Selection

of right I/O cable depends upon the

analyzer being used (Enterprise or

Branch), the I/O interface on the

monitored device and also the length... AMPTRAC Cat 6 and 5e UTP and

MT-RJ patch panels use an IDC

connection to the sensor contact

and therefore the I/O cable is

unterminated on one end and can

be cut to the appropriate length.

Available for the Enterprise and

Branch Analyzer. One I/O cable

required per 24-port patch panel,

and two for 48-port patch panel... AMPTRAC Connectivity

Management System uses

flexible sensors strips for some

LAN switches and also for patch

panel retrofit applications. The

flexible sensor strip uses the 1.27

mm FFC (flexible flat circuit)

connector. Available for use with

the Enterprise and Branch

analyzer

... AMPTRAC Connectivity

Management System uses PCB

sensor strips for many LAN

switches. The PCB sensor strip is

equipped with a 2.0mm MODU.

Available for use with the

Enterprise and Branch analyzer... AMPTRAC Connectivity

Management System offers the

MT-RJ/MPO cassette and the

Mini-RJ21 cassette with a plug-

and-play 6-position modular plug

(RJ11) interface... AMPTRAC Connectivity

Management System offers the

Duplex SC adapter plates, the

Duplex SC/MPO cassettes and

some PCB sensors (switch uplink

ports) with the 6-position 2.54

mm MTE... All 24-conductor I/O cables come

with molded boots on both ends... All I/O cables come with molded

boots on the analyzer connector

end... I/O cable is CM rated and listed

Analyzer I/O Cable Assemblies

AnalyzerMonitored Connector Number of Figure Part

Device TypeApplication

Conductors Number

AMPTRAC Patch Panels None, used for IDC Cat 5e, Cat 6 and MT-RJ 24 A 1435488-X

Flex-strip Sensor 1.27 mm, FFC LAN Switches & Retrofit Patch Panels 24 D 1435374-Y

Enterprise I/O Interface PCB Sensors 2.0 mm, MODU LAN Switches 24 C 1435336-YAMPMODU Cassettes 6-Position, RJ-11 MT-RJ and Mini RJ21 6 B 1435621-Y

Duplex SC LAN Switches 6-Position, 2.54 MTE Duplex SC Adapter plates, cassettes 6 - 1435686-Y

PCB Sensor 2.0 mm, MODU LAN Switch 2 - 1435843-Y

AMPTRAC Patch Panels None, used for IDC Cat 5e, Cat 6 MT-RJ 24 - 1435844-XBranch (Mini) I/O Interface

Flex-strip Sensor 1.27 mm, FFC LAN Switches Retrofit Patch Panels 24 E 1435846-YDB25 AMPMODUPCB Sensor 2.0 mm LAN Switches 24 - 1435845-Y

X denotes length in feet: -7=7, 1- -4=14, 5- -0=50, 9- -9=100 (Note: Can be cut to length)

Y denotes length in feet: -4=4, -7=7, 1- -0=10, 1- -4=14, 2- -5=25, 5- -0=50, 7- -5=75, 9- -9=100

A

B

C

D E

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:52 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


200



AMP NETCONNECT Cat 5e, 24-port 1435360-1

AMP NETCONNECT Cat 6, 24-port 1435363-1

Product Facts

:: Each kit contains a sensor strip, four front

bezels and a connector retaining clip

:: Kit is designed to retrofit the AMPTRAC

Connectivity Management System

solution to an existing installation of

AMP NETCONNECT Cat 5e or Cat 6 patch

panels

:: Each kit contains material to retrofit 24

ports Two kits are required for a 48-port

patch panel

:: Uses 1.27mm FFC for I/O interface

Patch Panel Retrofit Kits

Twisted Pair Patch Panels

Product Facts

:: Incorporate integrated solid contacts with

the panel for enhanced protection,

appearance and reliability

:: I/O connection made via 110 IDC punch

down in the rear of patch panel,

minimizing pre-planning and allowing for

cables to be cut to length

:: Cost-effective solution for AMPTRAC

Connectivity Management System-Ready

solution - install AMPTRAC patch panels

now and Analyzers and software later

:: Available in standard, flush versions as

well as angled versions for improved cable

and space management

:: Use AMP NETCONNECT high-performance

SL Series Cat 6 and 5E 110Connect

modular jacks

:: SL Series Multimedia patch panels come

unloaded and accept SL Seires Jacks for


Ports per Total Part Type

Module PortsRack Units

Number

Standard6

24 1U (1.75") 1435326-1

(Flush) 48 2U (3.50") 1435327-1

624 1U (1.75") 1435622-1

48 2U (3.50") 1435623-1Category 6

Angled 424 1U (1.75") 1435631-1

48 2U (3.50") 1435632-1

4 24 1U (1.75") 1435658-1

(Y-G-Or-Bl) 48 2U (3.50") 1435659-1

Standard6

24 1U (1.75") 1435367-1

(Flush) 48 2U (3.50") 1435368-1

624 1U (1.75") 1435624-1

Category 5e48 2U (3.50") 1435625-1

Angled 424 1U (1.75") 1435633-1

48 2U (3.50") 1435634-1

4 24 1U (1.75") 1435660-1

(Y-G-Or-Bl) 48 2U (3.50") 1435661-1

SL Series Multimedia (Unloaded) Angled 624 1U (1.75") 1435784-1

48 2U (3.50") 1435785-1

Terminated

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:53 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


201


Product Facts

:: Available for MT-RJ and Duplex SC

systems

:: AMPTRAC Duplex SC uses standard

AMP NETCONNECT Enclosures

:: Available in 62.5µm, XG (850nm LO

50µm) and Singlemode

:: Available for MPO cassettes... Contact us concerning the latest

AMPTRAC data center products,

such as MT-RJ, SC and LC fiber

cassettes, mini RJ21 copper

cassettes and AMPTRAC

compatible active products

Fiber Optic Patch Panels

I/O Rack Part Description

InterfaceType Capacity

UnitsFigure

Number

IDCDrawer 24-port (48-Fiber) Jacks sold separately 1U A 1435329-1*

Enclosure 72-port (144-Fiber) Jacks sold separately 4U - 1435788-1*

Drawer 4 AMPTRAC MT-RJ Cassettes (cassettes sold separately) 1U - 1435608-1

AMPTRAC MT-RJ 6-Position Enclosure 12 AMPTRAC MT-RJ Cassettes (cassettes sold separately) 4U B 1435593-2

Mod Plug 6-ports (12-Fibers) XG (850nm LO 50µm) Multimode - C 1435594-2

(RJ11) MPO Cassettes 6-ports (12-Fibers) 62.5µm Multimode - C 1435672-2

6-ports (12-Fiber) Singlemode - C 1435673-2

6-port (12-Fiber) Multimode (Beige) - D 1435657-1

6-Position Snap-In Adapter Plate 6-port (12-Fiber) Singlemode (Blue) - - 1435657-2

2.54 MTE 6-port (12-Fiber) Singlemode APC (Gr.) MODU - E 1435657-3

AMPTRAC Duplex SC Retrofit Kit For existing 6-port adapter plate (559596-X) - - 1435685-1

6-Position 6-ports (12-Fibers) XG (850nm LO 50µm) Multimode - - 1435653-2

Mod Plug MPO Cassettes 6-ports (12-Fibers) 62.5µm Multimode - F 1435688-2

(RJ11) 6-ports (12-Fiber) Singlemode - - 1435689-2

*Note: AMPTRAC MT-RJ Patch Panel Enclosures come loaded with empty MT-RJ 6-Pack Housings. MT-RJ Patch Panel Jacks purchased separately.

See page 122.

Loaded

and Terminated

E F

B

A

DC

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:55 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


202


Product Facts

:: Exceeds Category 6 performance

specifications Patch cable assemblies

contain 9th conductor that is connected

to external probe molded into the

modular plug boot

:: AMPTRAC Category 6 patch cable

assemblies are backwardly compatible

so that they support new or existing

Category 5e systems exceed Cat 5e

channel requirements

:: External probe makes contact with

sensor pad on the sensor strip and/or

patch panel sensor contact

:: Off-center probe designed to

accommodate stacked-jack LAN switch

configurations

:: CM rated and listed cable


:: Color matched overmolded boots

:: Ethernet cross-over cable assemblies

availableDescription Color Part Number

White 1435834-X

Gray 1435835-X

Green 1435860-X

AMPTRAC Blue 1435861-X

Category 6 Red 1435862-X

Yellow 1435863-X

Black 1435864-X

Orange 1435918-X

Violet 1435919-X

Cross-over (Category 6) Red 1435815-X

X denotes length in feet: -3 = 3, -5 = 5, -7 = 7, 1- -0 = 10, 1- -4 = 14, 1- -6 = 16, 2- -5 = 25

UTP Patch Cords

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:55 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


203


Product Facts

:: Exceeds optical performance

specifications for 62.5µm, XG

(850nm LO 50µm) Multimode and

Singlemode

:: Duplex SC, MT-RJ and Duplex LC

assemblies available

:: Patch cable assemblies contain

copper conductor that is connected

to external probe

:: External probe makes contact with

sensor pad on the sensor strip

and/or patch panel sensor contact

:: One wire/one probe design to

monitor duplex fiber port as a single

connection

:: OFNR (riser) rated and listed cable

:: Cable is a mini-tri-zip design for

flexibility and small size

Decription Fiber Type Figure Part Number

62.5µm Multimode 1435351-X

MT-RJ to MT-RJ XG (850nm LO 50µm) Multimode 1435352-X

Singlemode A 1435353-X


MT-RJ to Duplex SC XG (850nm LO 50µm) Multimode 1435356-X



MT-RJ to Duplex LC XG (850nm LO 50µm) Multimode 1435793-X



Duplex SC to Duplex SC XG (850nm LO 50µm) Multimode 1435725-X

Singlemode B 1435726-X


Duplex SC to Duplex LC XG (850nm LO 50µm) Multimode 1435796-X



Duplex LC to Duplex LC XG (850nm LO 50µm) Multimode C 1435790-X


X denotes length in meters: -1 = 1, -2 = 2, -3 = 3, -5 = 5, -7 = 7, 1- -0 = 10 Note: Contact Tyco Electronics concerning potential ST connector solutions.

Fiber Patch Cords

C

A B

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:55 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


204


LAN Electronic Sensor StripsProduct Facts

:: Sensor Strips are readily available

for a number of LAN electronic

equipment types

:: Custom Sensor Strips can be

designed to work with most LAN

electronic equipment. For assistance,

call AMP NETCONNECT Customer

Service at 1-800-553-0938

:: Manufacturer, model number, and

model revision of the LAN equipment

are required in determining the

selection of the proper sensor strip

:: Sensor strips contain an adhesive

backing for easy installation

Type I/O # Ports Part

Interface per sensor NumberTypical Switch

24 1435335-X NumerousFlexible 1.27mm 16 1435340-X depending uponSensor Strip FFC 12 1435341-X dash number

8 1435342-X

24 1435346-X Numerous

16 1435345-X depending upon

12 1435344-X dash number

2.0 mm 24 1435346-1 Cisco 4000 and 6000 48-port blades

MODU 24 1435346-4 CISCO 3500, 48-port

PCB 24 1435346-5 CISCO 3500, 24-port

Sensor Strip 26 1435827-1 CISCO 2950

16 1435820-1 CISCO 16-port GBIC blade

6-position 2.54 mm 2 1435818-1 CISCO 3500 Fiber Uplink Ports

MTE 2 1435819-1 CISCO 6550 Fiber Supervisory Blade

X denotes the specific make and model number of the LAN electronics to be monitored.

Contact AMP NETCONNECT Customer Service at 1-800-553-0938 for assistance in selection of proper sensor strip.


I/O Cable Retainer Bracket 1435779-1

for CISCO 3500, 48-port switch

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:55 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


205


At the core of the AMPTRAC Connectivity Management System is the iTRACS sophisticated database application that

discovers, maps, documents, and reports the status of your network assets from end-to-end. When combined with AMPTRAC

hardware, this integrated set provides real-time monitoring of the network and all devices, including PCs switches, hubs,

servers, cabling and connections. The state-of-the-art software features a sophisticated graphics module and a variety of

customizable, user-defined tracking and reporting options. The iTRACS solution also gives you the ability to set up alerts,

alarms, audit logs and messages, all according to pre-defined policies and rules. The iTRACS solution offers a variety of

optional add-on products that enhance and extend iTRACS’ physical layer connectivity capabilities to end device, as well as to

third- party and in-house applications. These products include iTRACS IDISCOVER™, iTRACS IPBX™, iTRACS Virtual Wiring

Closet™, and iTRACS SDK™. iTRACS Enterprise Adapters for HP Openview, CA Unicenter, IBM Tivoli, Peregrine and other

leading third-party as well as in-house applications are also available.

For information about product availability, pricing, delivery, installation and support services, and other software-related

questions, please contact iTRACS Corp. at 1-877-948-7227, by e-mail at [email protected], or visit them at

www.itracs.com

iTRACS Software

Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:55 PM

AM

PT

RA

C C

ON

NE

CT

IVIT

Y S

YS

TE

M


206


Ch10-AMPTRAC_3-04.qxd 3/15/2004 3:55 PM

M R

J 2

1 C

ON

NE

CT

OR

SY

ST

EM


207

MRJ 21 CONNECTOR SYSTEM

MRJ 21 Connector SystemCassette Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

Chapter Summary

:: MRJ 21 provides an application

independent copper platform for

applications today and into the future -

including Gigabit, VoIP & powered Ethernet.

:: The small size of the MRJ 21 connector and

cabling reduces cable bulk in pathways and

spaces, enabling much higher port counts

in a smaller space.

:: Factory termination and testing of the

cassettes provides assurance of pluggable

performance on site. This enables rapid

installation or MACs with pre-tested

quality.

:: The modularity of this solution significantly

reduces time to install or migrate from a

10/100BASE-T 2-pair platform to a Gigabit

Ethernet 4-pair platform. Upgrading is as

simple as unplugging one cassette and

plugging in the new one. The same cable is

re-usable.

:: Cassettes break out high-performance

24-pair solutions to the appropriate wiring

patterns for standards-based 10/100BASE-

T, Gigabit Ethernet, and other applications.

:: Common cable assembly lengths provide

readily available, pluggable solutions,

speeding implementation.

:: Additional hardware options continue to be

released. Contact your sales engineer or

check our website for the latest updates.

11

Ch11-MiniRJ21_3-04.qxd 3/15/2004 3:56 PM

MR

J 2

1 C

ON

NE

CT

OR

SY

ST

EM


208

MRJ 21 CONNECTOR SYSTEM

Product Facts

:: High-performance copper cabling

solution

:: High-density, small form factor

connectivity

:: Factory terminated and tested solution

:: Modular, pluggable solution

:: Application specific cassettes

MRJ 21 Patch Panel


Cable Assembly, UTP MRJ 21 to MRJ 21 1751386-X

Cable Assembly, UTP MRJ 21 to RJ-21 1751405-Xx denotes length in meters: -3 = 2m, -4 = 3m, -5 = 4m, -6 = 5m, -7 = 7m,

-8 = 10m, -9 = 13m, -10 = 15m, -11 = 17m, -12 = 20m

Cable color available in grey only.

Cassettefront

Cassetteback

Patch Panel

MRJ 21 Cable Assemblies

Product Facts

:: Dense CHAMP style double blade design

with offset jackscrews

:: Contact layout and footprint for

differential pairs creates reduced

crosstalk and built in compensation

:: 1.5 to 4 times the port density of 2x6

Stacked Mod Jack (RJ45)

:: 3 times the port density of an RJ21

:: Jackscrews for positive latching and

secure cable retention

:: Common and custom cable assembly

lengths are available. Ask your sales

engineer for more information.

:: Additional cable assembly lengths are

available. Also available with plenum

grade cable. Ask your local sales engineer

for more information.


Patch Panel, 1U, 3-Cassette 1479451-1

Cassette, 2x6, 10/100BASE-T (2 pair) 1479452-1

Ch11-MiniRJ21_3-04.qxd 3/15/2004 3:56 PM

LA

N E

LE

CT

RO

NIC

S &

WIR

EL

ES

S


209

LAN ELECTRONICS & WIRELESS

LAN Electronics and WirelessCompact Ethernet Switches . . . . . . . . . . . . . . . . . . .210-211

5-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . .210

8-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . .210

16-Port Compact Ethernet Switch . . . . . . . . . . . . . . . .211

24-Port Compact Ethernet Switch . . . . . . . . . . . . . . . .211

Smart Ethernet Switches . . . . . . . . . . . . . . . . . . . . . . .212-213

8-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . .212

16-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . .212

24-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . .213

SNMP Managed Ethernet Switches . . . . . . . . . . . . . . . . .214

24-Port SNMP Managed Switch . . . . . . . . . . . . . . . . . . . .214

Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . .215-216

10/100 Fast Ethernet Media Converters . . . . . . . . . . . .215

Gigabit Ethernet Media Converters . . . . . . . . . . . . . . . . . .216

19” Rackmount Chassis System . . . . . . . . . . . . . . . . . . . . .216

Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

Enterprise Wireless Access Point . . . . . . . . . . . . . . . . . . .217

Chapter Summary

:: Wide range of highperformance, cost-effectiveswitches and mediaconverters

:: Unmanaged switches areideal for small office, smallworkgroup or home officeapplications

:: Smart switches are idealfor network managers whowant to have a basic levelof control of their network.

:: SNMP managed switchesare full-featured Layer 2switches perfect for thefirst point of networkcontact in enterpriseapplications.

:: Ethernet media convertersproducts enable a widerange of reliable networksolutions

:: Wireless Access Pointdelivers a cost-effective,highly secure and SNMPmanaged solution for awide range of business,government, hot-spot,industrial and corporateapplications

12

CO

MP

AC

T E

TH

ER

NE

T S

WIT

CH

ES


210


8-Port Compact Ethernet Switch




Product Facts

:: Compact and easy to install Ethernet

switches

:: Ideal for Small Office/Home Office

(SOHO), small business and home

networking applications

:: Supports 10BASE-T and 100BASE-TX

Ethernet applications

:: For use with RJ45, shielded or

unshielded, Category 6, 5e, 5 and 3

twisted pair structured cabling

systems

:: Data rate auto-negotiation and full or

half duplex mode auto-selection

:: Auto MDI/MDI-X detection eliminates

the need for crossover cable

assemblies

:: Strong metal case helps to protect the

switch against damage

:: Powered via a compact external AC

power adapter

AMP NETCONNECT Ethernet LAN Switches

Tyco Electronics offers a wide range of high performance, cost-effective AMP NETCONNECT Ethernet Switches. The

AMP NETCONNECT Switches include unmanaged Compact Ethernet Switches, Smart Ethernet Switches with built-in or

optional fiber uplink ports and SNMP Managed Ethernet Switches with optional fiber or twisted pair Gigabit uplink ports.

AMP NETCONNECT's basic, unmanaged Compact Ethernet Switches are ideal for Small Office/Home Office (SOHO), small

workgroup or home networking applications. Smart Ethernet Switches have fiber uplink ports either built-in/fixed (8-Port

switch only) or optional (16- and 24-Port switches) to enable high speed connections to backbones, servers and network

devices over Singlemode or Multimode (50 or 62.5/125µm) fiber using industry standard MT-RJ, SC and ST-Style

connectors. SNMP Managed Ethernet Switches deliver management capabilities required by most network managers using

interfaces such as direct connection to a console port, Telnet, or web browser sessions. Optional fiber or twisted pair uplinks

can be added for high speed network interface. Fiber uplinks include Singlemode and Multimode (50 or 62.5/125µm)

Gigabit (1000BASE-SX or LX) and 100BASE-FX. Optional twisted pair uplink is via an RJ45, 100/1000BASE-T interface.

These uplinks can be used in any combination on the switch to deliver a highly flexible backbone solution.

With an emphasis on high quality, competitive cost and ease of use, AMP NETCONNECT Ethernet Switches are a great

choice for anyone from a home office user to an enterprise IT manager.

CO

MP

AC

T E

TH

ER

NE

T S

WIT

CH

ES


211




:: Compact and easy to install Ethernet

switches

:: Ideal for small office/business and

home networking applications





twisted pair structured cabling

systems





assemblies



:: Powered via an internal, auto-ranging

AC/DC power unit

:: Can be mounted in either 10" or 19"

frames

:: Optional brackets for standard 19"

rack mounting included

Product Facts

:: In addition to above features, this

switch is:

··· Ideal for medium sized

office/business applications



SM

AR

T E

TH

ER

NE

T S

WIT

CH

ES


212


AMP NETCONNECT

Smart Ethernet Switches

AMP NETCONNECT Smart switches can be configured

using the local console port to control functions such as

VLAN assignments and port enable/disable modes. This

capability is ideal for network managers who want a

basic level of network control.

Product Facts

:: In addition to features at top, this switch:

:: Ideal for linking medium sizedworkgroups to remote servers or routersvia optional fiber uplink port

:: Optional fiber uplink port:

··· Available separately

··· Plugged into the front of the switchfor easy access

··· Support 100BASE-FX applications

··· Available with Multimode MT-RJ, SCand ST-Style and Singlemode SC fiberuplink ports

··· Multimode fiber uplinks arecompatible with 50/125µm and62.5/125µm fiber types

:: Basic port controls and VLAN settings aremanageable via console port on front foreasy access

:: Optional brackets for standard 19" rackmounting included

16-Port Smart Ethernet Switch withOptional Fiber Uplink Port

Product Facts

:: Easy to install Ethernet switches

:: Supports 10BASE-T and 100BASE-TX Ethernet applications

:: For use with RJ45, shielded or unshielded, Category 6, 5e, 5 and 3

twisted pair structured cabling systems

:: Data rate auto-negotiation and full or half duplex mode auto-selection

:: Auto MDI/MDI-X detection eliminates the need for crossover cable

assemblies

:: Strong metal case helps to protect the switch against damage

:: Powered via an internal, auto-ranging AC/DC power unit

:: Can be mounted in either 10" or 19" frames

8-Port Smart Ethernet Switches withFiber Uplink Ports

Description Fiber Uplink Part Number

MT-RJ Multimode 1591042-1

8-Port Smart Ethernet SwitchSC Duplex, Multimode 1591038-1

SC Duplex, Singlemode 1591044-1

ST-Style Multimode 1591040-1

19" Mounting Brackets (Set of two) 1591068-0


16-Port Smart Ethernet Switch 1591046-1


Optional Fiber Uplink Port ModuleSC Duplex, Multimode 1591050-0



Product Facts

:: In addition to features at top, this switch:

:: Ideal for linking small workgroups toremote servers or routers via integral fiberuplink port

:: Multimode fiber uplinks:

··· Fiber uplink ports support 100BASE-FXapplications and feature speed auto-negotiation and auto MDI/MDI-Xdetection eliminating the need forcross over cables

··· Compatible with 50/125µm and62.5/125µm fiber types

··· Available with Multimode MT-RJ, SCand ST-Style and Singlemode SC fiberuplink ports

:: Basic port controls and VLAN settings aremanageable via console port located onrear of unit

:: Optional brackets for standard 19" rackmounting available separately

SM

AR

T E

TH

ER

NE

T S

WIT

CH

ES


213


Product Facts

:: Easy to install 24-Port Ethernet switch

:: Ideal for linking large sized workgroups

to remote servers or routers via

optional fiber uplink port





twisted pair structured cabling systems





assemblies

:: Optional fiber uplink port:


··· Plugged into the front of the switch

for easy access

··· Supports 100BASE-FX applications

··· Available with Multimode MT-RJ,

SC and ST-Style and Singlemode

SC fiber uplink ports

··· Multimode fiber uplinks are

compatible with 50/125µm and

62.5/125µm fiber types

:: Basic port controls and VLAN settingsare manageable via console port onfront for easy access

:: Optional brackets for standard 19" rack

mounting included



:: Powered via an internal, auto-ranging

AC/DC power unit


24-Port Smart Ethernet Switch 1591092-1


Optional Fiber Uplink Port Module SC Duplex, Multimode 1591050-0



24-Port Ethernet Smart Switch withOptional Fiber Uplink Port

SN

MP

MA

NA

GE

D E

TH

ER

NE

T S

WIT

CH

ES


214


Description Application Interface Type Part Number

24-Port SNMP Managed Ethernet Switch 1591058-1

Gigabit (1000BASE-SX) SC Duplex Multimode 1591060-0

Gigabit (1000BASE-LX) SC Duplex, Singlemode 1591062-0

Optional Uplink Port Modules100BASE-FX MT-RJ, Multimode 1591084-0

100BASE-FX SC Duplex, Multimode 1591082-0

100BASE-FX SC Duplex, Singlemode 1591086-0

100/1000BASE-T RJ45 Shielded/UnshieldedTP 1591088-0

Product Facts

:: Easy to install 24-Port

Ethernet switch

:: Ideal for linking large sized

workgroups to remote servers

or routers via two optional

fiber uplink ports

:: Supports 10BASE-T and

100BASE-TX Ethernet

applications


unshielded, Category 6, 5e, 5

and 3 twisted pair structured

cabling systems

:: Features a 12Gbps backplane

:: Data rate auto-negotiation and

full or half duplex mode auto-

selection

:: Auto MDI/MDI-X detection

eliminates the need for

crossover cable assemblies

:: Optional brackets for standard

19" rack mounting included

:: Strong metal case helps to

protect the switch against

damage

:: Powered via an internal, auto-

ranging AC/DC power unit

:: SNMP Management:

··· Direct control of port and

VLAN settings, bandwidth

control, MAC address

security, port mirroring and

quality of service

··· Manageable via console

port, Telnet or web

browser sessions or SNMP

programs

:: Accepts two optional uplink

ports

:: Optional fiber uplink ports:


··· Plugged into the front of

the switch for easy access

··· Support 100BASE-FX and

Gigabit (1000BASE-LX or

1000BASE-SX)

applications

··· Available with Multimode

MT-RJ, SC and ST-Style,

Singlemode SC fiber uplink

ports

··· Multimode fiber uplinks

are compatible with

50/125µm and

62.5/125µm fiber types

:: Optional twisted pair uplink

ports:

··· Support Gigabit

(1000BASE-T) and

100BASE-T applications

··· Feature speed auto-

negotiation and auto

MDI/MDI-X detection

eliminating the need for

cross over cables

··· Feature one modular RJ45

jack

24-Port SNMP Managed Switchwith Dual Optional Uplink Ports

AMP NETCONNECT SNMP Managed Ethernet Switches

AMP NETCONNECT SNMP Managed Ethernet Switches allow network managers excellent control and

visibility of distributed switches using advanced functions accessible through a direct connection to the

console port, Telnet or web browser sessions or SNMP programs. This capability is ideal for network

managers who want to have versatile control of their network.

ET

HE

RN

ET

ME

DIA

CO

NV

ER

TE

RS


215


AMP NETCONNECT Ethernet Media Converters

AMP NETCONNECT Ethernet Media Converters are high quality media conversion products that support 10BASE-T,

100BASE-TX and Gigabit (1000BASE-T) Ethernet standards and can be used in a wide range of applications including

office buildings, professional workgroups, campuses, Fiber-to-the-Desk (FttD) and industrial systems.

Media Converters are used to extend Ethernet segments or LANs to servers and other network elements using

Singlemode or Multimode (50 or 62.5/125µm) optical fibers connectorized with the MT-RJ, SC or ST-Style connectors.

With a strong focus on simple, cost effective, quality installations, AMP NETCONNECT Media Converters enable a wide

range of reliable network solutions.

Fast Ethernet Media Converters



Fast Ethernet Media ConverterSC Duplex Multimode 1591024-1

SC Duplex Singlemode 1591030-1


Product Facts

:: Installation is plug and play

:: Ideal for both new and legacy LAN applications

:: RJ45 Port:

··· For use with shielded or unshielded, Category

6, 5e, 5 and 3 twisted pair structured cabling

systems

··· Supports 10BASE-T and 100BASE-TX Ethernet

applications

··· Data rate auto-negotiation and full or half

duplex mode auto-selection

··· Auto MDI/MDI-X detection eliminates the need

for crossover cable assemblies

:: Fiber Port:

··· For use with MT-RJ, SC or ST-Style, Multimode

or SC Singlemode fiber optic connectors

··· Multimode fiber ports are compatible with

50/125µm and 62.5/125µm fiber types

··· Supports 100BASE-FX Ethernet applications

:: Increased network resilience through Link Loss

Forwarding function that allows suitable Ethernet

switches to implement alternate paths when

required

:: Stand-alone or chassis mountable

:: Strong metal case helps to protect the media

converter against damage

:: Powered via an external, AC power adapter

:: Dimensions 4.7" x 3.4" x 1.0"

ET

HE

RN

ET

ME

DIA

CO

NV

ER

TE

RS


216



Rack Mount Media Converter Chassis System 1591032-1

Spare/Redundant AC Power Unit 1591034-0

Note: Media converters purchased separately

Product Facts

:: Mounts in standard 19" racks

:: 3U (5.25")

:: Accepts up to ten (10) Fast Ethernet or Gigabit

Ethernet Media Converters

:: Ideal for enterprise critical and networks

:: Can be loaded with mixed types of media

converters for flexibility

:: Media converters can be hot-swapped within the

chassis

:: Media converters are purchased separately

:: Media Converter Chassis is shipped unloaded

and includes one installed power supply

:: A second power supply can be installed for a

dual redundancy power system

:: Power supplies can be hot-swapped for critical

availability networks

Gigabit Ethernet Media Converters


1000BASE-SX SC Duplex Multimode 1591020-1

1000BASE-LX SC Duplex Singlemode 1591022-1

Product Facts

:: Installation is plug and play

:: Ideal for both new and legacy LAN applications

:: RJ45 Port:

··· For use with shielded or unshielded, Category

6, 5e, 5 and 3 twisted pair structured cabling

systems

··· Supports 1000BASE-T Ethernet applications

··· Data rate auto-negotiation and full or half

duplex mode auto-selection

··· Auto MDI/MDI-X detection eliminates the

need for crossover cable assemblies

:: Fiber Port:

··· For use with SC Multimode or Singlemode

fiber optic connectors

··· Multimode fiber ports are compatible with

50/125µm and 62.5/125µm fiber types

··· Supports 1000BASE-SX and 1000BASE-LX


:: Stand-alone or chassis mountable

:: Strong metal case helps to protect the media

converter against damage

:: Powered via an external, AC power adapter

:: Dimensions 4.7" x 3.4" x 1.0"

Rack Mount Media Converter Chassis System

Loaded

WIR

EL

ES

S A

CC

ES

S P

OIN

T


217


The AMP NETCONNECT Enterprise Wireless Access Point from Tyco Electronics delivers a cost-effective, highly

secure, SNMP managed solution for a wide range of business, government, hot-spot, industrial and corporate

applications. With leading edge transceivers, user-friendly management and ultra-high security, this versatile access

point delivers business class WLAN support for large and medium size enterprises. With simultaneous and seamless

operation in both 2.4GHz and 5GHz bands, the AMP NETCONNECT Enterprise Wireless Access Point delivers a

reliable future-proofed solution for legacy and emerging WLAN applications. Full compliance with the IEEE 802.11a,

11b and 11g standards allows easy connectivity at data rates up to 54Mbps. Roaming support enables high

mobility clients to achieve very high data rate communications with the corporate network at any WLAN location in

the enterprise. Power-over-Ethernet (PoE) cable eliminates the needs for local AC power and enables the access

point to be powered over existing structured cabling systems. Ultra-high security is essential in new wireless LANs

and the AMP NETCONNECT Enterprise Wireless Access Point delivers.

:: High level Encryption using WPA for standard networks

:: 802.1x Authentication using TLS, T-TLS and MD5

:: WPA Dynamic Encryption

:: Hidden SSID facilities

:: MAC Access Control Lists

Management is critical in all business networks. The AMP NETCONNECT Enterprise Wireless Access Point provides

management via support for SNMP programs, web browser and Telnet sessions, and a console port for direct

connection. All of which allow flexibility of management. This AMP NETCONNECT Enterprise Wireless Access Point

delivers exceptional security, user-friendly management and throughput for demanding business users.

Enterprise Wireless Access Point

AMP NETCONNECT Wireless Products


Enterprise Wireless Access Point 0-1591700-1

PoE Cable Adapter 0-1591710-1

Product Facts

:: 2.4GHz and 5GHz bands

:: 802.11a, b and g modes

:: SNMP managed

:: Multi-level security

:: Power-over-Ethernet (PoE) ready

:: Easy to install

:: High level Encryption using WPA for

standard networks

:: 802.1x Authentication using TLS,

T-TLS and MD5

:: WPA Dynamic Encryption

:: Hidden SSID facilities

:: MAC Access Control Lists

LA

N E

LE

CT

RO

NIC

S &

WIR

EL

ES

S


218


PO

WE

R D

IST

RIB

UT

ION


219

POWER DISTRIBUTION

Chapter Summary

:: AMPINNERGY - Modular power

system for business and retail

store applications

:: Undercarpet Power and

Communications systems - for

business and retail power and

data distribution under carpet

squares

Power and Undercarpet Products:AMPINNERGY Modular Distribution Power System......................220

Raised Access Floor/Zone Wiring Distribution System........................220

Undercarpet Power and Communications Systems..................................221

Undercarpet Power System ................................................................................221

Undercarpet Communications Systems.........................................................222

Components for use with Undercarpet Power

and Communications Systems ..........................................................................222

For part numbers and additional information

for Power and Undercarpet Products, call1-

800-533-0938 and request document

1654963. Or visit

www.ampnetconnect.com/power

13

Ch13-AMPINNERGY&Undercarpet_3-04.qxd 3/15/2004 4:11 PM

PO

WE

R D

IST

RIB

UT

ION


220

POWER DISTRIBUTION

AMPINNERGY Modular Power Distribution System

Product Facts

:: Layout and planning manual (124235)

available for your CAD designer

:: CAD layout and design services also available

directly from Tyco Electronics

:: Contact AMP NETCONNECT Customer Service

for Construction Specifications Institute (CSI)

or construction Specifications Canada (CSC)

format

:: Certified to Canadian Standards Association

22.2 (42) and (203) standards

:: Compatible with 2002 National Electrical code

(NEC) sections 604, 605 and 300-22(c)

:: Compatible with 2002 Canadian Electrical

Code (CEC) sections 12-2500 and 12-010

:: AMPINNERGY System is rated 20 Amps per

circuit - 125/250 VAC

:: Listed under Underwriters Laboratories, Inc.

183, 498 and 1286

The AMP NETCONNECT

AMPINNERGY Modular Power

Distribution System can be used to

deliver power to workstations in

raised floor installations through

AMP NETCONNECT Access Floor

Workstation Modules, Modular

Office Systems Furniture Panels,

retail store display fixtures and

other methods as allowed by the

NEC, CEC and local electrical codes.

It may also be used to power the

overhead lighting fixtures.

The Modular Wiring System is available in 5-wire/3-circuit and 8-wire/4-

circuit versions. The 5 and 8-wire versions have a 5.29 mm [10 AWG]

conductor (neutral) to accommodate higher currents due to triplen

harmonics. The 8-wire configuration has a separate 3.32 mm [12 AWG]

neutral and isolated ground for the fourth circuit to allow an isolated,

dedicated circuit for equipment sensitive to powerline noise.

Raised Access Floor/Zone Wiring Distribution System for UL183 Listed Manufactured Wiring System Applications

Product Facts

:: Each Zone supports up to 27 Workstations

... Up to six 6-Port Power Distribution

Modules

... 27 Access Floor Workstation Modules

(AFWM) with 2 Duplex Receptacles

... 4 - 6 duplex receptacles per circuit

:: Each Zone supports up to 12 Circuits

... Three may be dedicated

... 5- and 8-wire capability

:: Reusable and reconfigurable

:: Plug and Play design reduces installation

time and expense

:: Easy to install - reduced installation time and

expense

:: The system design allows for dedicated or

isolated ground circuits

:: All components are factory assembled,

tested and are UL 183 Listed

:: Can be integrated with zone communication

wiring systems

:: Flexible cable saves installation labor up to

40%

The AMPINNERGY

Raised Access

Floor/Modular Zone

Wiring Distribution

System can be designed

into any NEC rated 300-

22(c) raised flooring

application using Power

Distribution Modules

(PDMs) and/or Pre-

Wired Zone Distribution

Kits.

All system interconnection is accomplished by using AMPINNERGY pre-

connectorized 5- or 8-wire cable assemblies to provide a complete plug and

play system that can be reused when system relocation or changes are

required.

Access Floor Workstation Modules (AFWMs) can be factory pre-wired to

meet the design requirements or site wired with an AMPINNERGY line entry

cable assembly that will interconnect to all AMPINNERGY 5- and 8-wire

cable assemblies.

Each pre-wired Zone Distribution Kit is designed to supply 240 Amps in an

available 12 circuit - 20 Amp per circuit configuration.

Each PDM is designed to supply 60 or 80 Amps in a 3 or 4 circuit - 20 Amps

per circuit configuration.

For part numbers and additional information, call1-800-533-0938 and

request document 1654963. Or visit www.ampnetconnect.com/power



221

POWER DISTRIBUTION

UN

DE

RC

AR

PE

T

Undercarpet Power and Communications Systems

Undercarpet Power System

The AMP NETCONNECT Undercarpet

Cabling system is a low profile, flexible

system that makes even the most

complex cabling job in an office or retail

environment simple, economical and

beautifully invisible. The cabling to

provide power, voice and data services to

your equipment can be handled with

ease - from desk lights to network

connections. And it's changeable! If

changes are required after the initial

installation, don't worry about the

cabling. You can change it to fit your new

requirements just about as easily as you move the furniture or retail

display fixtures.

Take up a few section of the carpet squares, change the routing of the

Undercarpet cables and relocate the floor fittings. Presto! You're back in

business. With this system, all your power, voice and data networks can

be routed virtually anywhere under the carpet without the restrictions

encountered with underfloor ducts, walls, partitions and power/data

poles.

Products Required for

Undercarpet Power Distribution

:: Transition Box, either Flush, Surface or

Floor

:: Transition Block

:: Undercarpet Power Cable

:: Floor preparation*

:: Top Shield

:: Tope Shield Bonding Clips

:: Hold Down Tape

:: Spray Adhesive

:: Direct-connecting receptacles

*Note: Floor preparation is required for slab-

on-grade installations, but is recommended for

all installations.

Primary applications

:: Ideal for Retail Stores

:: Highly suited for the "Store-in-a-box" Concept

since all power, voice and data cabling can

be pre-packaged in one box.

:: Slab-on-grade, first floor areas

:: Open lobby or customer reception areas

:: Areas not easily accessible by traditional

cabling methods

Power and Communications

System Facts

:: Eliminates need for trenching floors or

drilling thru walls to run cabling

:: No need to disturb adjacent stores in

shopping malls to gain access for pulling

cables

:: Better control of quality and work schedule

The AMP NETCONNECT Undercarpet Power System is a modern, flexible way to

make the most complex cabling layout simple, economical and easy to handle.

Whatever equipment may be needed can be cabled with ease. Building

construction is possible without the

extensive and costly electrical ductwork

required for other systems. The AMP

NECONNECT Undercarpet System can

be installed directly on any level,

continuous and relatively smooth

floor surface of concrete,

ceramic, composition

or wood.

What could be

simpler? No "poking"

through floors or

setting up poles to carry your cabling. Transition fittings on wall or columns or in

the floor make connections with the central distribution panels. Flat cable can be

folded at 90° angles to change direction. Insulation displacement connections

and "insulating patches" simplify installation. And the wide variety of floor fittings

lets you plug into the power lines wherever you like.


PO

WE

R D

IST

RIB

UT

ION


222

POWER DISTRIBUTION

Undercarpet Communications Systems

Reliable communication is essential to the

modern business. The AMP NETCONNECT

Undercarpet Communications System is a Flexible

method of brining communications to a

complicated office or retail layout. Simple,

economical cabling allows voice and data

connection to be placed wherever they are

needed. Like the Undercarpet Power System, the AMP

NETCONNECT Undercarpet Communications System can be installed

directly on any level, continuous and relatively smooth floor surface of

concrete, ceramic, composition or wood. They system eliminates the need

for ductwork, poke-throughs and even telepoles.

Simple transition boxes in the wall or floor provide easy connections to the

round cables running from the telecommunications closet. Up to six 4-pair

cables can be connected and run from a single wall box. The Undercarpet

Communications System utilizes high performance TIA/EIA-568-B

Enhanced Category 5 cabling for superior performance. A variety of floor

fittings are available to support the 110Connect, SL Series and AMP

Communications Outlet (ACO) Systems.

Product required for undercarpet

communications distribution

:: Transition Box

:: Transition Box Cover

:: Transition Block

:: Undercarpet Communications Cable

:: Hold Down Tape

:: Floor Fitting

:: Voice or Data Jacks

Components for use with Undercarpet Power andCommunications Systems

Not all installs can be easily separated into power or

communications. Sometimes the two meet or even overlap.

Tyco Electronics offers a full line of AMP NETCONNECT

Undercarpet products for use in just these situations. From

Flush Floor Transition Boxes to "Conference Room-in-a-Box"

Kits, everything you need to incorporate both Undercarpet

Power and Communications in a single solution is available.

Tyco Electronics also offers a full line of AMP NETCONNECT

communications (voice/data) connectivity and accessories.

Whether you need to install power and communications

systems on a raised floor or run an SVGA signal from your

computer to a monitor/projector up to 35 feet away, AMP

NETCONNECT offers a comprehensive line of products to

complete the connection.


ET

HE

RS

EA

L C

ON

NE

CT

IVIT

Y S

YS

TE

M


223

ETHERSEAL CONNECTIVITY SYSTEM

EtherSeal Connectivity SystemModular Jack and Coupler Outlet Kits . . . . . . . . . . . . . . . . 224

Modular Plug Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

Stainless Steel Faceplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Enclosures and Accessories . . . . . . . . . . . . . . . . . . . . . . . . 226

Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Chapter Summary

:: TIA and ISO component and

IEC 60529 IP67 compliant

:: Uses industrial grade materials

:: Uses the same high performance


and 5e components as standard

product lines

:: Complete Cat 5e cabling

solution for both harsh and

office environments

:: Equipment interface receptacles

available through Tyco

Electronics

:: Positive latching mechanism

:: Push-On and Twist Off Mating

Action

:: Blind mating with Polarized

Keying

:: Tactile feedback that confirms

full mating

:: Eliminates accidental

disconnects when properly

connected

14

Ch14-EtherSeal_3-04.qxd 3/15/2004 4:14 PM

A

D

CO

NN

EC

TO

RS

& P

LU

GS


224


B

CD

EtherSeal Modular Jack and Coupler Outlet Kits


Category 6UTP A 1479565-2

SL Series 110Connect Modular Jack KitSTP B 1479566-2

Category 5eUTP A 1479563-2

STP B 1479564-2

SL Series Toolless Modular Jack Kit Category 5eUTP C 1479561-2

STP D 1479562-2

SL Series Modular Coupler Kit Category 5eUTP E 1479599-2

STP - 1479600-2

Modular Jack Cap F 1479591-2

A

F

Product Facts

:: Meet or exceed TIA and ISO component


:: IP67 Compliant

:: Available for Shielded and Unshielded

Systems

:: Traditional 110 tool and toolless versions

:: Front-loading into enclosures and outlets

:: Push-On and Twist Off Mating Action

:: Blind mate with Polarized Keying

:: Tactile feedback confirms fully mated

:: Optional Outlet Cap with tether available


Category 6 Unshielded ASolid 1479682-2

Stranded 1479683-2

Unshielded BSolid 1479583-2

Modular Plug KitStranded 1479584-2

Category 5e

Shielded CSolid 1479585-2

Stranded 1479586-2

Modular Plug Cap D 1479592-2

EtherSeal Modular Plug Kits

C

Product Facts



:: IP67 Compliant

:: Available for Shielded and Unshielded

Systems

:: Available for solid and stranded cable




:: Optional Plug Cap with available tether

:: Category 6 Modular Plug Kit can be used for

either shielded or unshielded applications.

B

E


FA

CE

PL

AT

ES


225


Description FigurePart Number

With Gasket Without Gasket

Single Gang1-Port A 1479593-2 1479593-1

2-Port B 1479594-2 1479594-1

Double Gang4-Port C 1479595-2 1479595-1

2-Ports/2-Ports D 1479596-2 1479596-1

EtherSeal Stainless Steel Faceplates

AB

C

Product Facts

:: Available in single and double gang

:: Accepts EtherSeal Jack or Coupler

Kits (purchased separately)

:: Available with and without sealing

gaskets

:: Part Number 1479596 accepts two

ports of EtherSeal Outlet Kits and two

ports standard SL Series or

110Connect modular Jacks, SL Series

Multimedia Jacks and SL Series or

110Connect Multimedia Inserts

D


ET

HE

RS

EA

L C

ON

NE

CT

IVIT

Y S

YS

TE

M


226


Knockouts

FigureDescriptionEtherSeal

Cable ConduitPart

PG11 PG29 PG36Number

12 12 - 2 A 1479654-1

Enclosure, Indoor/Outdoor 4 4 - 1 B 1479655-1

2 2 1 - C 1479656-1

EtherSeal Enclosures and Accessories

Product Facts

:: NEMA 4 and 4X rated

:: IP67 compliant when installed per

instruction sheets

:: Can be used in either indoor or

outdoor environments

:: Provides fully sealed remote access

to data and telephone services

:: Knockouts provide easy

configuration for customer

requirements

:: Knockouts per enclosure as listed

:: Cable and conduit glands provide a

way to seal cable and or conduit

entries

EtherSeal Enclosures

Description For use with Figure Part Number

PG11 Cable A 1479657-1

Gland Kits PG29 3/4" Conduit B 1479658-1

PG36 1" Conduit C 1479569-1

EtherSeal Cable & Conduit Glands

Product Facts

:: Cable and conduit glands provide a

way to seal cable and or conduit

entries into EtherSeal Connector

Enclosures

B

A

C

A

B

C


ET

HE

RS

EA

L C

ON

NE

CT

IVIT

Y S

YS

TE

M


227


UL/NEC Pair JacketPackaging Conductor

PartRatings Count Color Number

SolidUTP 1499447-3

FTP 1499449-3CMR 4-Pair Grey

1000ft,UTP 1499448-3Wooden Reels StrandedFTP 1499450-3

EtherSeal Category 5e Cable


EtherSeal to EtherSealUTP 1479601-X

STP 1479603-X

EtherSeal to Standard UTP 1479602-X

RJ-45 Modular Plug STP 1479604-X

Modular Plug Cap 1479592-2

X= Denotes length in feet: -3= 3, -5= 5, -7= 7, 1- -0= 10, 1- -5 = 15

EtherSeal Category 5e Cable AssembliesProduct Facts



:: IP67 Compliant

:: Shielded and Unshielded cable assemblies

available

:: Utilizes EtherSeal, industrial grade Cat 5e

cable

:: Factory-terminated and tested for quality

:: Both EtherSeal to EtherSeal and EtherSeal

to standard modular plug versions

available




:: Optional Plug Cap with available tether

Product Facts

:: Meets or exceeds TIA/EIA and ISO Category

5e specifications


Ethernet

:: Sunlight (UV) resistant for harsh

environments

:: Oil resistant, Level II

:: Double jacketed - PVC

:: CMR (Riser) rated

:: Shielded and Unshielded - solid and

stranded cables are available


ET

HE

RS

EA

L C

ON

NE

CT

IVIT

Y S

YS

TE

M


228



TO

OL

S


229

TOOLS

ToolsFiber Optic Tool Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230-233

Epoxies and Accessories . . . . . . . . . . . . . . . . . . . . . . . . 234-235

Microscopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236-237

Fiber Optic Tools and Accessories. . . . . . . . . . . . . . . 237-239

Twisted Pair Tools and Accessories . . . . . . . . . . . . . 240-246

Miscellaneous Tools and Accessories . . . . . . . . . . . 247-248

Chapter Summary

:: All tooling required to install

optical fiber and twisted pair

connectors found in this catalog.15

Ch15-Tools_3-04.qxd 3/15/2004 4:20 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


230

TOOLS

Universal No Epoxy Termination Tool KitPART NUMBER 1278949-1 Product Facts

:: Includes all tools necessary for

installing MT-RJ Jacks,

LightCrimp Plus and

LightCrimp-style connectors

Product Facts

:: Termination Tool kits include:

... Pro-Crimper II Hand Tool and

appropriate die set

... Stripper tools

... Kevlar shears

... Cable holder

... Cleave tool

... LightCrimp Plus Termination

Video CD-Rom

:: LightCrimp PlusTermination Video CD-

Romalsoavailableseparately, part

number: 1374503-1


LightCrimp Plus SC and ST-Style Connectors and MT-RJ Jack Termination Tool Kit 1278118-1

LightCrimp Plus SC Connector Termination Tool Kit 1278022-1

LightCrimp Plus ST-Style Connector Termination Tool Kit 492697-1

MT-RJ Jack Termination Tool KitPART NUMBER 1278346-1

Product Facts

:: Tool kit includes:

... Soft case

... Cleave tool

... Miller strip tool

... Cable stripper

... Micro stripper

... Scissors

... MT-RJ strip length template

... Actuator key

... Alcohol wipes

LightCrimp Plus Termination Tool Kits

No Epoxy, No Polish Termination Tool Kits

Ch15-Tools_3-04.qxd 3/15/2004 4:20 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


231

TOOLS

Product Facts

:: Tool kits include:

• Pro-Crimper II Hand Tool and

appropriate die set

• Stripper tools*

• KEVLAR shears*

• Template strip

• Cleave tool

• Polishing bushings

• Polishing films

• Polishing plate

• Microscope as listed*

*Microscope available separately

on page 184


LightCrimp SC Termination KitNo Microscope 503706-1

Premium Microscope 503706-2

No Microscope 503330-1

LightCrimp ST-StyleTermination Kit Premium Microscope 503330-2

Pocket Microscope 503330-3

Mini Tool Kit No Microscope 492322-1

No Microscope 503957-1

LightCrimp SC and ST-StyleTermination Kit Premium Microscope 503957-2

Pocket Microscope 503957-3

Mini Tool Kit No Microscope 492543-1

Product Facts

:: Includes all tools necessary to install

these connectors (Epoxy sold

separately pages

182-183):

• ST-Style, AMP NETCONNECT

SC, FSD, FC, D4, FSMA

:: Tool kits include (except were

specified otherwise):


crimping dies


• Polishing film

• Cable and fiber strippers

• Scissors

• Scribe tool

• Microscope with tripod and

power source (on page 184)

• Epoxy curing oven

Professional Installer Kit


With 110 V Curing Oven 501258-7

With 220 V Curing Oven 501258-8

Without Curing Oven or Microscope 501258-9

Epoxy, Polish Termination Tool KitsPro-Installer Epoxy/Polish ConnectorTermination Tool Kits

LightCrimp Termination Tool Kits

No Epoxy, Polish Termination Tool Kits

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


232

TOOLS

Epoxy, Polish Termination Tool Kits

Epoxy/Polish Connector Termination Tool KitsSC PART NUMBER 503746-7

ST-STYLE PART NUMBER 503746-1

Product Facts

:: Tool kits include:

• Carrying case


crimping dies


• Polishing film

• Cable and fiber strippers

• Scissors

• Scribe tool

:: Kits contain polishing materials for

approximately 60 connectors

(consumables can be purchased

separately on page 183)

:: Other connector style kits available

:: SC tool kit can also be used to install

FC Connectors

MT-RJ Test Kits


50/125µm Multimode 1278861-2

MT-RJ to ST-Style 62.5/125µm Multimode 1278862-2


50/125µm Multimode 1278861-1

MT-RJ to SC 62.5/125µm Multimode 1278862-1


Product Facts

:: Each Test Kit includes:

• 1 - MT-RJ Adapter

•2-MT-RJ(nopins)toSCSimplex

or ST-Style Cable Assemblies

• 1 - MT-RJ (with pins) to SC

Simplex or ST-Style Cable

Assembly

• 1 - MT-RJ to MT-RJ Cable

Assembly

• 2 - Mandrels (not included

with Singlemode Kit)

• 1 - Carrying case

:: Test Kits for Secure MT-RJ Systems also

available (see“MT-RJ OPTICAL FIBER

SYSTEMS TESTING” White Paper,

available on-line at

www.ampnetconnect.com for details)

Epoxy/Polish LC Termination AccessoriesIn addition to the Epoxy/Polish tool kits above, these items are needed to terminate LC Epoxy/Polish Connectors:


Polishing Puck 1754074-1

Cable Preparation Template 1588756-1

LC Hand Tool and Die Set 1588176-1

1.25mm Ferrule Microscope Adapter 1278997-1

Oven block assembly 1457628-1

LC Fiber Protectors, for Jacketed Cable 1457630-1

LC Fiber Protectors, for Buffered Fiber 1457630-2

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


233

TOOLS

Replacement Components for MT-RJ Test Kits

Product Facts


:: Pinned MT-RJ cable assemblies are

used for testing only




Description To Part Number

50/125µm Multimode 1435096-2



50/125µm Multimode 1435092-2

Unpinned MT-RJ SC 62.5/125µm Multimode 1435092-1


50/125µm Multimode 1435094-2



50/125µm Multimode 1435096-5



50/125µm Multimode 1435092-5

Pinned MT-RJ SC 62.5/125µm Multimode 1435092-4


50/125µm Multimode 1435094-5



MT-RJ Loopbacks


50/125µm Multimode 1278357-1

MT-RJ Loopback 62.5/125µm Multimode 1278153-1


MT-RJ OTDR Test Assemblies

Product Facts

:: For use in testing with an OTDR test

set





50/125µm Multimode 1588080-1MT-RJ to SC Simplex Launch Lead

62.5/125µm Multimode 1588079-1

50/125µm Multimode 1588078-1MT-RJ to ST-Style Launch Lead

62.5/125µm Multimode 1588077-1

Product Facts



Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


234

TOOLS

TRA- CON Epoxies

Product Facts

:: General purpose epoxy good

for SC and ST-Style epoxy

polish connectors

:: Pre-measured bi-packs for consistent

results

:: Low viscosity

:: High impact

DescriptionApprox. Number Cure Time

Pot Life Color after Curing Operating Temp Part Numberof Connections and Temp

24 hr @ 25°C or

2-gram pack 250 2 hr @65°C or 30 min Blue -60°C to 100°C 501195-4*

10 min @ 110°C

*25 packs.

HYSOL Epoxy- Tubes

Product Facts

:: General purpose epoxy good

for SC and ST-Style epoxy

polish connectors

:: Two-part epoxy comes in

two tubes

:: Medium viscosity

DescriptionApprox. Number Cure Time

Pot Life Color after Curing Operating Temp Part Numberof Connections and Temp

7-gram pack 400 30 min @ 100°C 30 min Blue -60°C to 100°C 502418-1

DescriptionCure Time Pot Color after Viscosity Maximum Glass Transition Part

& Temp Life Curing (cps) Temp Temp Number

EPO-TEK 353ND 10 min @ 115°C 4 hr Red 2000 200°C 124°C 504035-1

Product Facts

:: Pre-measured bi-packs for

consistent results

:: Ideal for bonding fibers and optical

components

:: Long pot lives

:: Heat-cured and room-temperature

epoxies

:: High service temperature

:: Supplied in 4-gram packs

EPO -TEK Epoxies

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


235

TOOLS

Polishing Consumables

Connector Type

DescriptionEpoxy-Polish Epoxy-Polish Epoxy-Polish Lightcrimp Grit Part

SC Singlemode ST-Style Multimode ST-Style SC and ST-Style Grade Number

- - - 4 15µm 228433-9

Hand Polishing Film *4 4 4 4 5µm 228433-8

- - 4 4 1µm 228433-7

4 4 4 4 0.3µm 228433-5

Final Polishing Film ** 4 4 - - - 502748-2

Consumables Kit †- - 4 - - 502306-1

4 4 - - - 502306-2

* Packet of 10.

** Packet of 5.

† Contains all consumable supplies for at least 100 connectors.

Epoxy Curing Oven


110 VAC 502134-1

220 VAC 502134-2

Adapter Block for 8 Duplex Connectors 502222-1

Adapter Block for 24 Single Connectors 502129-1

Product Facts

:: Reduces time required to cure epoxy

in fiber optic connectors

:: Provides a uniform, controlled curing

environment increasing productivity

and consistency

:: Accepts all AMP NETCONNECT Fiber

Optic Connectors that require epoxy

:: Comes equipped to cure up to four

duplex connectors and 12 simplex

connectors at once

:: Optional blocks to allow up to 8

duplex and 24 simplex connectors

available

:: Variable temperature control (60°C

to 125°C)

:: Includes thermometer and cable

support bracket

:: Curing sleeves on page 187

Adhesive Applicator SyringePART NUMBER 501473-3 Product Facts

:: 3 cc capacity

:: Ideal for epoxy

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


236

TOOLS

Product Facts

:: Inspection Microscope is designed

specifically for portability and

optimum visual examination of

terminated

ends of singlemode and multimode

fibers

:: Useful in both field and laboratory

:: When not using AC adapter,

2 AA batteries are required for use

(batteries yield approx. 50 hrs of

operation)

:: Integral KG-3 infrared filter that

protects user’s eyes

:: Pre-centered adapter mount provides

quick, easy focusing and changing of

connectors

:: Long life LED (approx. 100,000 hrs of

operation)

:: Low battery indicator


... 10 power objective

microscope made of durable,

lightweight A.B.S. plastic

... Eyepiece (10 or 20 power)

... Handy, lockable double-well

carrying case made of high-

density polyethylene, with

antistatic foam cutouts

... Tripod stand

... Adapters included: Universal

2.5mm (adapts SC, ST-Style,

FC, FSD and RSD), FSMA

and F07

:: Other adapters available are:

... MT-RJ

... MPO

... MPO APC

... MPX

... MPX APC

... LC

Microscope

DescriptionPower of Part

Magnification Number

10x Objective, 10x Eyepiece 100x 502970-1

10x Objective, 20x Eyepiece 200x 502970-3

DANGER: Active fibers should never be viewed through a microscope.

Accessories


SC, APC Adapter 504618-1

MT-RJ 492749-1

MPO 492414-1

MPX 492426-1

LC 1278997-1

Universal 2.5mm (SC, ST-Style, FC, FSD and RSD) 502977-1

110 VAC Power Supply 502967-1

240 VAC Power Supply 502968-1

IEC Pigtail Cord* 502966-1

Red On/Off Switch Replacement Bulb, 2.8 V 502964-1

Green On/Off Switch Replacement Bulb, 2.5 V 1278471-1

Tripod 502965-1

10x Eyepiece 502969-1

20x Eyepiece 502969-2

10-20x Zoom Eyepiece 502969-3

*Power cord is terminated on one end only. The other end will have

to be installed with wall plug by the end user.

Inspection Microscope Kits and Accessories

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


237

TOOLS

Product Facts

:: 100 power magnification

:: Compact hand-held size

:: Built-in battery operated illumination

:: Microscope comes with Universal

2.5mm Adapter (for SC and ST-Style)

Pocket Inspection Microscope and Accessories


100x Microscope 1278132-1

Universal 2.5mm Adapter (for SC and ST-Style) 1278134-1

DANGER: Active fibers should never be viewed through a microscope.

Product Facts

:: Long-lasting sapphire blade

:: Pen-type casing

Sapphire -Tipped Scribe Tool and Accessories


Sapphire-tipped Scribe Tool 504064-1

Replacement Blades 504290-1

Product Facts

:: Used in LightCrimp Plus terminations

(included in LightCrimp Plus Tool

Kits)

LightCrimp Plus Buffer/Cable HoldersSC PART NUMBER 1278023-1ST- STYLE PART NUMBER 492703-1

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


238

TOOLS

AMP CORELINK Splice Workstation

PART NUMBER 503605 -1

LightCrimp Universal Cleave Tool


Fiber Optic Cleave Tool

Product Facts

:: Used in both SC and

ST-Style LightCrimp

Connector terminations

Product Facts

:: UsedinMT-RJJackandLightCrimp Plus

Connector terminations

:: Lifespan of blade is approximately

1000 cycles

Universal Fiber Optic Cleaving Tool



Fiber Optic Cleave Tool 492674-1

Replacement Blade 1278219-1

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


239

TOOLS

Description CableJacketDiameter(mm) Used With Notes Part Number

Ceramic and Stainless Steel ST-Style Connectors Metal 503337-1

Polish Bushing 3.0Ceramic, Stainless Steel and Polymer

Composite ST-Style ConnectorsBlack Polymer 503304-1

SC Connectors Black Polymer 502631-1

Ceramic, Stainless Steel and Polymer

Curing Sleeve 3.0 Composite ST-Style Connectors12 pcs 502259-1

SC Connectors 1 pc 502656-1

Strip Card Kit - SC and ST-Style Connectors - 501818-1

Polishing Bushing 2.5mmPolishing Bushing SC

ST-Style Curing Sleeve, 2.5mm Bayonette

Polishing Bushings, Curing Sleeves,and Strip Card Kit

SC Curing Sleeve

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

FIB

ER

OP

TIC

AN

D A

CC

ES

SO

RIE

S


240

TOOLS


PRO-CRIMPER II Hand Tool 58532-1

Fiber Optic Die Sets

Description Cable Jacket Diameter Part Number

ST-Style, Ceramic/Stainless 3.0

Hand Tool and Die Set 58433-4

Steel/Polymer Composite Die Set Only 58424-1

ST-Style Stainless Steel 3.0

Hand Tool and Die Set 58551-1

(504XXX-X Series Only) Die Set Only 58552-1

ST-Style Ceramic Used with Loose Tube 3.8 Die Set Only 503890-1

3.0Hand Tool and Die Set 503911-1

SCDie Set Only 503910-1

2.0 & 2.4/2.5 & 3.0Hand Tool and Die Set 492026-1

Die Set Only 492025-1

LightCrimp ST-Style 3.0Hand Tool and Die Set 503568-1


LightCrimp SC 3.0Hand Tool and Die Set 503699-1


LightCrimp Plus and LightCrimp ST-Style 3.0Hand Tool and Die Set 492623-1


LightCrimp Plus and LightCrimp SC 3.0Hand Tool and Die Set 492782-1


LC -Hand Tool and Die Set 1588176-1


PRO-CRIMPER II (shown with a die set)

PRO-CRIMPER II Hand Tool and Fiber Optic Die Sets

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


241

TOOLS

Product Facts

:: The industry standard termination

tool for all 110Connect terminations

:: Each tool comes with a blade


Pro Impact Tool with Extended-Life Blade 1375308-1

Standard Impact Tool with Standard Blade 558418-1

Non-Impact Tool with Standard Blade 1583236-1

110Connect Tools with Blades

Product Facts

:: Includes:

• Installer’s knife

• Pro Impact Tool with

extended-life blade

• Shears

• AMP NETCONNECT pouch

110Connect Termination Tools

Pro -Installer Twisted Pair Tool KitPART NUMBER 1375307-1

Pro Impact Tool Standard Impact Tool Non-Impact Tool

Product Facts

:: Termination tool for SL Series

jacks

:: Simplifies the termination

process, especially for

Category 6 jacks

:: Terminates and cuts all 8

conductors at once

:: Simplifies lacing process and

speeds up terminations

SL Series Jack Termination ToolPART NUMBER 1725150-1

Ch15-Tools_3-04.qxd 3/15/2004 4:21 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


242

TOOLS

Product Facts

:: Cyclops Stripper suitable for use

with UTP Cable

:: Coaxial Stripper can be adjusted for

use with RG-6, -58 and -59 cable

Cable Strippers

Diagonal CuttersPART NUMBER 1116571-1


Cyclops Cable Stripper 1375317-1

Coaxial Cable Stripper 1490490-1

Cyclops Cable Stripper Coaxial Cable Stripper

Palm Grip ToolPART NUMBER 569949-1

Product Facts

:: Fits comfortably into one hand

:: Holds one 110Connect Jack, one SL

Series 110Connect Jack, or ACO

110 Card Edge Connector for

termination

Replacement Blades


Extended-Life 110 Blade 1375309-1

Extended-Life 66/110 Blade 1375310-1

66/110 Blade 110/110 Blade

Product Facts

:: Extended-life blades increase blade

life 3 times over standard blade life

6-110XC 4-Pair Punch Down ToolPART NUMBER 1725062-1

Product Facts

:: For use with AMP NETCONNECT

Category 6 6-110XC Cross-

Connects

:: Used to:

... Punch down 4-pairs of

conductors at one time... Punch down 6-110XC 4- and 5-

Pair Connecting Blocks onto

6-110XC Wiring Blocks

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


243

TOOLS

Product Facts

:: External Strain Relief Clamp and Die

Set and Tool are for use with the

External Strain Relief Clamp for 8-

position Category 3, 5 and 5e

Modular Plugs (page XXX) only

PRO-CRIMPER II Hand Tool and Die Setsfor Twisted Pair Applications

Pro-Installer’s Modular Plug Hand ToolProduct Facts

:: Cuts, strips and terminates cable

:: Ratchet control provides complete

termination cycle

:: Interchangeable die sets

accommodate all plug sizes

:: Die set to Modular Plug cross-

reference on page 242

Description Color Dot Part Number

4-Position Handset GreenHand Tool and Die Set 2-231652-3

Die Set Only 853400-3*

Hand Tool and Die Set2-231652-4*

4- and 6-Position Line Blue 2-231652-8


6-Position Offset Latch OrangeHand Tool and Die Set 2-231652-6


6-Position Long Body VioletHand Tool and Die Set 2-231652-7


Hand Tool and Die Set2-231652-1

8-Position Line Black 2-231652-2*


Hand Tool and Die Set3-231652-0

8-Position High Performance White 3-231652-1*

Die Set Only 1-853400-0*

*Packaged in a clear, plastic clamshell for point-of-purchase display.


PRO-CRIMPER II Hand Tool 354940-1

ExternalStrainReliefClampHandToolandDieSet 224928-1

DieSet Only 224928-2

PRO-CRIMPER II (shown with a die set)

Product Facts

:: Category 6 Modular Plug Die Set and

Tool crimps both the Strain Relief

and the Modular Plug contacts at the

same time

:: Category 6 Modular Plugs on page

153

Category 6 Modular Plug Hand Tool and Die Set


Category6ModularPlugHand Tool and DieSet 790163-1

DieSet Only 790163-2

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


244

TOOLS

Product Facts

:: Each Kit contains Carrying Case,

Blade Replacement Kit, Screw Driver,

and items as listed

:: Modular Plug to Die Set cross

reference listed on page 242

Product Facts

:: The Pistol Grip Tool terminates

AMP-BARREL Edge Connectors one

pair at a time

:: Shortens assembly time by trimming

conductors to the proper length and

helps maintain proper pair twist for

high performance cables

:: This tool requires the installation kit

to be fitted with a special edge

connector, part number 406351-1

Kit Contains

High Performance, 8-Position 6-Position,Long 4- & 6-Position 4-Position

Hand Tool 8-Position Die Set Line Die Set Body Die Set Line Die Set Handset Die Set Part Number

2-231652-0 1-853400-0 853400-1 853400-7 853400-8 853400-3

X X X X X – 1-231666-4

X – X X X X 1-231666-3

X – X X X – 1-231666-2

X – X – X X 1-231666-1

X – X – X – 1-231666-0

Carrying Case, Blade Replacement Kit and Screw Driver ONLY 231666-9

Replacement Blade Kit (5 Cutters and 5 sets of Strip Blades) 231662-5

Cutter Blade 856727-1

Pistol Grip Tool for AMP-BARRELEdge Connectors


Pistol Grip Tool with Head 58568-1

Head only 122533-1

Pro-Installer’s Modular Plug Hand Tool Kits and Accessories

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


245

TOOLS

Compression Tool for AMP-BARRELEdge ConnectorsPART NUMBER 1085 CT

Portable "Butterfly" Hand Tool (MI-1)for CHAMP 25-Pair Connectors


Standard 14-50 Positions, 90° Wire Dress 229378-1

Optional Lacing Fixture 230328-3

Product Facts

:: Mass terminates and shears all wires

in a single operation

:: Wires can be laced in tool or in

separate lacing fixture

:: Base plate can be bench-mounted

AMP-BARREL Wire Insertion ToolsProduct Facts

:: Wire Insertion Tool for Edge

Connectors may be used to insert

and terminate wires into the special

edge connector (on page 59) for use

with the pistol grip tool

:: Wire Insertion Tools for Undercarpet

Transition Blocks may be used to

insert and terminate wires into

AMP-BARREL connectors used in

Undercarpet Cabling System

Transition Blocks

:: Wire Insertion Tools for Undercarpet

Transition Blocks cuts off conductor

when it is inserted

Product Facts

:: Provides improved termination of

AMP-BARREL Connectors compared

to standard pliers

:: May also be used with KEYSTONE

Modular Jacks

:: Tool can be purchased from:

Rostra Tool Co.

30 East Industrial Road

Branford, CT 06405

Phone: 1-203-488-8665

For: Figure Part Number

ACO Edge Connectors A 556706-1

Wire Insertion Tool for UC Transition Blocks B 231890-1

A B

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


246

TOOLS

Product Facts

:: 14- to 64-Position Kit includes Wire

Inserter, all 5 sizes of Index Slides,

Cable Clamp, Insertion/Extraction

Tool (230238-1), and carrying case

:: 50-Position Kit includes wire inserter,

50-position index slide and cable

clamp

Product Facts

:: Used with CHAMP Connectors

:: Wire insertion tool is used to insert

individual wires when making repairs

:: Contact insertion/extraction tool is

used to replace damaged contacts

Palm Grip Hand Tool Kits

Contact Insertion/Extraction ToolsPART NUMBER 230238 -1

T- Handle Wire Insertion ToolPART NUMBER 229384 -1


14- to 64-Position 229764-2

50-Position only 229451-2

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


247

TOOLS

4-Pair UTP TesterPART NUMBER 1490530-1 Product Facts

:: Tests for opens, shorts and wire map

(mis-wires, reversals, and split pairs)

:: Auto-on/off feature

:: Battery low indicator

Butt SetPART NUMBER 1490532-1

Product Facts

:: LCD display shows: on-hook voltage,

number dialed, off-hook current,

caller ID, stored numbers, etc.

:: Tone and pulse dialing

:: 6-Position modular cord set

attachment included

:: Auto-off feature

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

TW

IST

ED

PA

IR T

OO

LS

AN

D A

CC

ES

SO

RIE

S


248

TOOLS

Tone TracerPART NUMBER 1490533-1

Product Facts

:: Permits wire and cable identification

without direct metallic contact

:: Ergonomic design

:: Can be used with any tone generator

:: Quick change tips available

Tone GeneratorPART NUMBER 1490531-1 Product Facts

:: Three built-in tones

:: Auto-off feature

:: Separate talk battery for increased

voltage and power for test sets

:: 6-Position modular jack allows

multiple cord/test lead sets to be

used for different applications

:: Comes with test lead set

Product Facts

:: For use with HDPE Single Wall and

Dual Wall, and Riser Rated Innerduct

:: Works with Innerduct 1/2” to 3” in

diameter

Innerduct Cutting ToolPART NUMBER 1435764-1

Note: For a complete line of PVC cements and accessories call 800-553-0938.

Ch15-Tools_3-04.qxd 3/15/2004 4:22 PM

AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


249

AMP NETCONNECT HOME NET-WORKS

AMP NETCONNECT Home Net-WorksRCS36 Series Media Convergence Center . . . . . . . . . . .250

RCS36 Series Media Connectivity Kits . . . . . . . . . . . . . . .251

RCS36 Series Media Outlet Kits . . . . . . . . . . . . . . . . . . . . .251

RCS14 Series Media Convergence Center . . . . . . . . . . .252

RCS14 Series Media Connectivity Kits . . . . . . . . . . . . . . .253

RCS14 Series Media Outlet Kits . . . . . . . . . . . . . . . . . . . . .253

RCS6 Series Media Convergence Center . . . . . . . . . . . .254

Faceplates & Mounting Straps . . . . . . . . . . . . . . . . . . . . . . .255

Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

Faceplate Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Passive Video Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Active Video Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

Satellite Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Video Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Coax Patch Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Audio Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

A-BUS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

Media Convergence Centers & Accessories . . . . .261-263

Chapter Summary

:: Supports data rates up to1 gigabit

per second (1000BASE-T)

:: Fully compliant with residential

and commercial cabling and safety

standards

:: A true structured cabling system

offering maximum flexibility

:: Designed for simplicity and ease of

maintenance

:: Accepts UTP, coaxial and fiber

optic cables

:: Adaptable to all broadband video,

data and communications services

16

Ch16-Home Net-Works_3-04.qxd 3/15/2004 5:56 PM

AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


250


Outlet Kits

Three levels of connection capabilities at room outlets are available with kits providing increasing numbers of

connections per outlet. All kits are available in Category 5e or Category 6.

Product Facts

:: Decorator-style faceplate

:: (1) SL 110 jack

:: (1) F-connector insert

:: Meets TIA/EIA-570-A Grade 1

requirements

:: Acceptable for locations where only

one Cat 5e/6 application is required at

once (e.g., voice or data)

Product Facts


:: (2) SL 110 jacks

:: (1) F-connector insert

:: Exceeds TIA/EIA-570-A Grade 1

requirements

:: Ideal for locations requiring multiple

Cat 5e/6 applications (e.g., voice

and/or data)

Product Facts


:: (2) SL 110 jacks

:: (2) F-connector inserts

:: Meets TIA/EIA-570-A Grade 2

requirements

:: Ideal for locations requiring multiple Cat

5e/6 applications (e.g., voice and/or

data)

:: 2nd F-connector provides capability for

distributing modulated video (e.g., from

DVD player)


Cat 5e 2+2 Outlet Kit 1479162-X*

Cat 6 2+2 Outlet Kit 1479350-X*

Cat 5e 2+2 Decorator Outlet Kit 1479554-X*

Cat 6 2+2 Decorator Outlet Kit 1479555-X*

*X denotes color: -3 = White; 1- -1 = Electric Ivory

1+1 Outlet Kit

2+1 Outlet Kit

2+2 Outlet Kit










AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


251


A

B C D

E

C D FE

A B

Outlet Jacks and Inserts

Outlet Faceplates and Straps Description Figure Part No.

Decorator Faceplate A 1479159-X

Dbl Gang Decorator Faceplate – 1479625-X

Duplex Faceplate B 1479160-X

Wall Mount Phone Faceplate C 1479152-X

1-Port Faceplate – 1479443-X

2-Port Faceplate E 1479444-X




2-Port Duplex Strap – 1116618-X

2-Port Decorator Strap – 1116617-X

3-Port Decorator Strap D 1116616-X

4-Port Duplex Strap – 1339120-X

4-Port Decorator Strap – 1479504-X

X denotes color: -1 = Almond; -2 = Black; -3 = White; -4 Gray;

1- -1 = Electric Ivory

Outlet Cable: Cat 5eDescription Pkg. Type Part Number

Cat 5e Cable, CMR (non-plenum), White 6-1499452-2

Cat 5e Cable, CMR (non-plenum), Grey 6-1499452-4

Cat 5e Cable, CMR (non-plenum), BluePull Box*

6-1499452-6

Cat 5e Cable, CMR (non-plenum), Yellow 6-1499452-8

Recommendation: Blue for voice; Yellow for data; White for A-BUS audio.

Note: Cable does not have band markings on the white conductors. Cable is onlyavailable in Pull Box packaging.* Pull Box contains 1,000 feet of cable

Outlet Cable: Cat 6 Description Pkg. Type Part Number

Cat 6 Cable, CMR (non-plenum), White 219560-2

Cat 6 Cable, CMR (non-plenum), Grey 219560-4

Cat 6 Cable, CMR (non-plenum), Blue Pull Box*

219560-6

Cat 6 Cable, CMR (non-plenum), Yellow 219560-8

Recommendation: Blue for voice; Yellow for data; White for A-BUS audio.

Note: Cable does not have band markings on the white conductors.

* Pull Box contains 1,000 feet of cable

Description Figure Part Number.

Cat 5e Jack A 1375191-X*

Cat 5e Jack w/Dust Cover B 1375190-X*

Cat 6 Jack – 1375055-X*

Cat 6 Jack w/Dust Cover – 1375187-X*

Blank Insert – 1116412-X†

F-Connector Insert C 1339121-X†

RCA 110 Jack (red) – 1479230-X†

RCA 110 Jack (white) D 1479231-X†

RCA 110 Jack (yellow) – 1479232-X†

S-Video 110 Jack F – 1375149-X†

Speaker Post (black) E 1479190-X†

Speaker Post (red) – 1479191-X†

*X denotes color: -1 = Almond; -2 = Black; -3 = White;

-4 = Gray; -5 = Orange; -6 = Blue; -7 = Red; -8 = Yellow;

-9 = Green; 1- -0 = Violet; 1- -1 = Electric Ivory

† denotes color: -1 = Almond; -2 = Black; -3 = White;

-4 Gray; 1- -1 = Electric Ivory


AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


252


Standard Telecom Bridge

BackFront

Telecom Bridge/Security

BackFront

DSL/Security Module

Cat 5e/6 Connectivity Module

BackFront

Voice/Data Connectivity Panels

Panel SelectionConnectivity panels contain the modules and ports for distribution of voice and data

signals to room outlet connections. All are available in Category 5e or Category 6.

Product Facts

:: 6 ports – 4 lines per port

:: Expansion port

:: For basic telephone, fax and

dial-up modem service

Product Facts

:: 6 ports – 4 lines per port

:: Expansion port

:: RJ31 security interface port

:: For basic telephone, fax and dial-up

modem service

Product Facts

:: Line 1 DSL output & filtered input

ports

:: RJ31 security interface port

:: For splitterless DSL applications

*Filtering accomplished by connecting a

filtered phone output from DSL modem

or optional in-line DSL filter to DSL

Security Module DSL-IN port

Product Facts

:: 6 RJ45 ports – Cat 5e or 6

:: 110 punch down

:: Voice or data applications

c

b

a

d


AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


253


Corresponding component from facing page is indicated by color and letter.

Voice/Data Connectivity Panels

Configuration Matrix

RCS Connectivity Starter Kit

DSL Connectivity Starter Kit

RCS Connectivity Expansion Panel

18-port patch panel


RCS Connectivity Starter Kit, Cat 5e 1479278-1

RCS Connectivity Starter Kit, Cat 6 1479343-1


DSL Connectivity Starter Kit, Cat 5e 1479425-1

DSL Connectivity Starter Kit, Cat 6 1479426-1


18-Port Patch Panel, Cat 5e 1479281-1

18-Port Patch Panel, Cat 6 1479347-1


RCS Connectivity Expansion Panel, Cat 5e 1479200-1

RCS Connectivity Expansion Panel, Cat 6 1479344-1

d b d

d d d

d a d

c a d


AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


254


Product Facts

:: Provides an 18-port panel with:

... (2) 6-port patch modules

... (1) 6-port telecom bridge/security module(4 lines per

port) with RJ31 port for security panel... (6) Cat 5 4-pair 568A cables, blue, 1ft ... (2) Line 2 telecom cables, orange, 1ft... 8” hook & loop cable tie, blue... Label sheet & label covers... Terminate up to 12 Cat 5e/6 cables.... Any 6 outlet ports can be configured for 4-line phone.... All 12 can be configured for data.

Product Facts


... (1) 6-port patch module

... (1) DSL/security module with RJ31 port for security

panel

and RJ14 telco jumper cable... (1) Std. 6-port telecom bridge module (4 lines per port)... (7) Cat 5 4-pair 568A cables, blue, 1ft... (2) Line 2 telecom cables, orange, 1ft... 8” hook & loop cable tie, blue... Label sheet & label covers... Terminate up to 6 Cat 5e/6 cables.... Any 6 outlet ports can be configured for 4-line phone... All 6 can be configured for data.... DSL input/output ports eliminate the need for filters

at each phone outlet.... Eliminates DSL/security panel interference.

Product Facts



... (1) 6-port standard telecom bridge module (4 lines per port)

... (1) Cat 5 4-pair 568A expansion cable, blue, 1 ft

... Label sheet & label covers

... Terminate up to 12 additional Cat 5e/6 cables.

... Any 6 outlet ports can be configured for 4-line phone.

... All 12 can be configured for data.

Product Facts

:: Includes:


... Label sheet & label covers

... Terminate up to 18 Cat 5e/6 cables.

Voice/Data Connectivity panels Kits & Panel Selection


RCS Connectivity Starter Kit, Cat 5e 1479278-1

RCS Connectivity Starter Kit, Cat 6 1479343-1


DSL Connectivity Starter Kit, Cat 5e 1479425-1

DSL Connectivity Starter Kit, Cat 6 1479426-1


18-Port Patch Panel, Cat 5e 1479281-1

18-Port Patch Panel, Cat 6 1479347-1


RCS Connectivity Expansion Panel, Cat 5e 1479200-1

RCS Connectivity Expansion Panel, Cat 6 1479344-1

RCS Connectivity Starter Kit

DSL Connectivity Starter Kit

RCS Connectivity Expansion Panel

18-Port Patch Panel


AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


255


Description Part No.

18-Port SL Panel 1479438-1


Demarcation Jack Kit A 1479285-1

Demarcation Bracket (bracket only) B 1479441-1

Product Facts

:: Includes:... (3) SL interface housings... Label sheet & label covers

:: Accepts the following unshielded SL series jacks

and inserts:... Cat 5e/6 SL 110 jacks... F-type... BNC... S-Video... RCA... MT-RJ & ST-Style Fiber ... Create custom connectivity solutions.

Product Facts

:: Includes:

... Demarcation jack bracket

... Cat 5e SL 110 jack, blue

... Cat 5 patch cable, blue, 2ft

... Auxiliary disconnect outlet for incoming

telephone service.... Accepts 2nd Cat 5e/6 SL jack for incoming data

service demarcation.

Note: Recommend blue for voice and yellow for data.

Patch Cords

Telephone Line Designation Cords


Line 1/2 Telecom Cord, Blue 1479557-1

Line 2 Telecom Cord, Orange 1479004-1

Line 3 Telecom Cord, Green 1479005-1

Line 4 Telecom Cord, Gray 1479006-1

Line 3/4 Telecom Cord, Black 1479556-1

A

B

Demarcation Jack Kit

18-Port SL Panel


Cat 5e Patch Cord, Yellow, 2 ft. 219246-2

Cat 5e Patch Cord, White, 2ft. 219245-2

Cat 5e Equipment Cord, White, 8 ft. 219245-8

Cat 6 Patch Cord, Yellow, 2 ft. 219890-2

Cat 6 Equipment Cord, White, 8 ft. 219889-8

Cat 5 Equipment Cord, Blue, 1ft. 219198-1


AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


256


Frequency (MHz) 1x6 PVM 1x8 PVM

Insertion Loss (dB) 5–50 9.2 10.3

50–500 9.8 10.6

500–750 10.5 11.5

750–1000 11.0 12.5

Return Loss (dB) 5–50 16.0 18.0

50–500 20.0 18.0

500–750 20.0 20.0

750–1000 18.0 18.0

Isolation (dB) 5–50 25.0 25.0

50–500 25.0 25.0

500–750 23.0 23.0

750–1000 20.0 20.0

Connector Type “F” Female “F” Female

Impedance (ž) 75 75

DC Pass All Ports All Ports

RFI (dB) >130 >130

Component Selection

Passive Video Module Performance

AMP NETCONNECT Home Net-Works passive and active video modules provide a flexible and easy method

for distributing high-quality RF signals throughout an installed AMP NETCONNECT Home Net-Works coaxial

distribution system. AMP NETCONNECT Home Net-Works video modules feature push-pin latch installation:

just put the video module into place on the equipment panel and press the push-pins in to mount.

Passive Video Modules


1x6 passive video module (5–1000 MHz, DC Pass) 1479334-1

1x8 passive video module (5–1000 MHz, DC Pass) 1479335-1

Product Facts

:: Passive video modules (PVMs)

provide the capability to

distribute 1 RF input to 6 or 8

locations on an installed coaxial

distribution system. PVMs may

also be used as combiners for

multiple modulated RF sources.


AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


257



2x4 Active Bi-Directional Video Module (5–1000 MHz, DC Pass) 1479336-1

2x8 Active Bi-Directional Video Module (5–1000 MHz, DC Pass) 1479337-1

Product Facts

:: Active video modules (AVMs)

offer high performance, versatility

and a “future-ready” solution for

residential video distribution. The

2x4 and 2x8 AVMs are IR passing

port to port and capable of reverse

modulation utilizing a coax output

port. The 2x8 AVM amplifies the

incoming CATV/ANT signal, providing

a 4dB gain (8dB gain for 2x4 AVM)

to each of eight outputs compared

to an 11dB loss (typical) for the PVM.

The modulator input has its own

amplifier circuit providing a 2dB

gain (4dB gain for 2x4 AVM).

Active Video Modules

Parameter Frequency 2x8 AVM 2x4 AVM

(MHz) Min. Typ. Max. Min. Typ. Max.

Gain–Cable In (dB) 100 2.5 4.0 6.5 8.8

1000 3.0 4.0 6.0 7.5

Gain–Mod 1 100 -1.0 2.0 2.0 4.0

1000 -1.0 2.0 0.0 2.0

Loss–Reverse Band 5–40 -14.0 -17.0 -10.5 -12.5

Loss–Out/Out 54–1000 -14.0 -18.0 -10.0 -12.0

Return Loss–Cable In 54–100 -13.0 -11.0 -13.0 -11.0

100–750 -11.0 -9.0 -11.0 -9.0

750–1000 -13.0 -11.0 -13.0 -11.0

Return Loss–Mod 1 In (dB) 54–100 -12.0 -10.0 -15.0 -10.0

100–750 -12.0 -10.0 -13.0 -10.0

750–1000 -12.0 -10.0 -13.0 -10.0

Flatness (dB) 54–1000 +/-2.0 +/-2.0

Isolation–Out/Cable 54–1000 -75.0 -80.0 -75.0 -80.0

2nd Order Input Intercept (dB) -75.0 -75.0

3rd Order Input Intercept (dB) -60.0 -60.0

Composite 2nd Order (dB) -60.0 -60.0

Composite Triple Beat (dB) -70.0 -60.0 -70.0 -60.0

Noise (dB) 54–60 3.8 5.5 3.8 5.5

60–750 3.4 4.8 3.4 4.8

750–1000 3.8 5.5 3.8 5.5

Hum Modulation (dB) -70.0 -70.0

RFI Isolation (dB) 5–1000 -130.0 -130.0

DC Current (mA) 220.0 270.0 320.0 220.0 270.0 320.0

IR Pass Out/Out Out/Out


AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


258


Video Components: Component Selection

Product Facts

:: Provides a convenient means

to distribute two satellite LNB

inputs to any two outlet coax

ports for digital satellite service.

:: Mounts to either the RCS14 or

RCS36 Universal Equipment Panel.

Product Facts

:: Provides a means to terminate all horizontal coax cables

from wall outlets without the need to purchase multiple

video splitters/amplifiers.

:: Permanent horizontal coax cable is terminated once and

no longer needs to be disturbed. Reconfiguration is

accomplished via mini-coax patch cables between the

top side of the video patch panel and the video

distribution modules.

:: Reduces cost and complexity of video distribution

system — it’s only necessary to purchase video

splitters/amplifiers to support the number of ports

actually used at any given time. The simpler the

distribution system, the better.

:: Serves as a convenient means to patch incoming

services (DSS, digital cable box input, cable modem

input) directly to a selected wall outlet.

:: The combination of video patch panel and equipment

panel provides greater aesthetics and flexibility for

customizing the system.

:: Includes (6) 1479008-1 and (2) 1479009-1 Mini-Coax

patch cables


RCS36 Video Patch Panel 1479283-1

12-Port Video Feed-Thru Expansion Module 1479286-1

Product Facts

:: Flexible 75-ohm mini-coax patch cables provide

convenient means for patching between video

patch panel and video distribution modules.

:: Typical loss <1dB (5-1000MHz).


RG59 Mini-Coax Patch Cable, Black, 36” 1479007-1

RG59 Mini-Coax Patch Cable, Black, 18” 1479008-1

RG59 Mini-Coax Patch Cable, White, 18” 1479009-1

Video Patch Panel

Dual LNB Satellite Module

Coax Patch Cables

Description Part No.

Dual LNB Satellite Input Module 1479338-1


AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


259


Audio Components: Component Selection

6-Zone Audio Distribution Module


6-Zone Audio Distribution Module 1479339-1

Wiring Module to Volume Controls & Speakers

Impedance

Matching

Volume Control

Speaker Wire

from AmplifierSpeaker Wire

Two AMP NETCONNECT Home Net-Works System solutions are available for whole-house audio distribution.

Basic Speaker-Level Audio Distribution system:

Amplified audio is distributed from a central source to six locations. Speaker cable is star-wired from the audio

source amplifier and impedance matching volume controls (purchased from 3rd-party vendor) to the Media

Convergence Center. The speaker wire is connected to terminal blocks on the 6-zone audio distribution module.

(See Figure Below.)


Cat 5

UTP

A-BUS

Amplified

Volume

Control

Local Input

ModuleA-BUS Amplified

Volume Control w/ IR

Source

Input

Module

A-BUS Audio Hub

A

Audio Receiver

Line-Level Output

Connectivity Panel

BC

E

D

AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


260


A

B

C

D

E

A-BUS Audio System Diagram

A-BUS Audio System


4-Port Hub Kit w/Power Supply A 1479534-1

Amplified Volume Control B 1479392-1

Amplified Volume Control w/IR C 1479393-1

Source Input Module D 1479395-1

Local Input Module E 1479396-1

Product Facts

:: Premium A-BUS Audio Distribution System: ... Line-level audio, IR, and source on/off

status is distributed from a centralsource (e.g., PC, TV, CD player, etc.)over Cat 5 or better cabling toamplified volume control moduleslocated in each room — eliminating theneed for a separate amplifier.

... Any Cat 5e/6 outlet jack can be usedfor audio distribution by simplyconnecting the source input moduleusing a standard Cat 5 patch cable,then making the appropriateconnection in the Media ConvergenceCenter. Speaker cable (16Awgrecommended) is only requiredbetween the volume control andspeaker pair located in each room.Volume controls are available with orwithout IR capability.

... A-BUS Distribution Hubs support up tofour zones. The number of zones canbe expanded by adding additional hubsvia the expansion port. Local inputmodules allow each audio zone to beused for independent listening. (SeeFigure Below.)


AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


261


Media Convergence Centers and Accessories

Product Facts

:: UL Listed:

:: Telecommunications Circuit

Accessory

:: Household Fire and Burglary

Warning Control Unit

Enclosure & Covers

(4) 2.5” holes

w/plastic caplugs

Knockout for

surface mounting

Accommodates:

• (4) connectivity panels

• RCS36 universal

equipment panel

* (1) duplex electrical

box included

Easy-mount tabs (6)

18Awg steel with

white powder coat

Video patch panel

mounting location

Trim panel

mounting locations

(3) knockouts for

duplex electrical

box

A

Hinged door for

easy access

20Awg steel with

white powder coat

Door easily mounts

to enclosure with

only (4) screws

Beveled edge for

safety & aesthetics

Clear adhesive sleeve

for documentation

B

Bezel conceals

drywall edges

Lockable door for

security

C

(4) 2.5” holes with

plastic caplugs

Accommodates:

• (2) connectivity panels

• RCS14 universal

equipment panel

Knockout for

surface mounting

* (1) duplex electrical

box included(3) knockouts for duplex boxes

Description Figure Dimension Part Number

RCS14 Enclosure C 14.25”(h) x 14.25”(w) x 4”(d) 1375300-1

RCS14 Cover D 1479014-1

Description Figure Dimension Part Number

RCS36 Enclosure A 36”(h) x 14.25”(w) x 6”(d) 1375216-1

RCS36 Door B 1375272-1

*RCS36 recommended for maximum flexibility and expandability.

D

RCS36 Media Convergence Center

RCS14 Media Convergence Center

20Awg steel

White powder coat

Beveled edge for safety

& aesthetics

Clear adhesive sleeve

for documentation


AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


262


Product Facts

:: Designed as a solution for hotel

rooms

:: Supports six Category 5e ports

:: Provides RJ31 Line 1 access for

security systems

:: Outlet jacks may be configured for

either voice or data

:: Supports up to four additional ports

of copper, coax, and/or fiber optic

connectivity

:: Two ports available for F-couplers

:: Mounts on Triple Gang Electrical Box

(Steel City H2BD-3/4 & 1 or similar)

or bracket listed below


RCS6 Media Convergence Center with:

Mounting plate, 6-port telecom bridge/security module with RJ31 shorting plug, 1479116-1

four 2-line Telco jumpers, 6-port Category 5e UTP connectivity module, cover, labels

Mounting bracket for 16" on center studs 1479109-1

RCS6 Series

RCS6 Series Media Convergence Center


AM

PN

ET

CO

NN

EC

TH

OM

E N

ET

-WO

RK

S


263


Media Convergence Center Accessories


RCS36 Universal Equipment Panel A 1479282-1

RCS14 Universal Equipment Panel B 1479284-2

Network Equipment Mounting Shelf C 1479437-1

VELCRO Hold-Down Bracket D 1479440-1

C

Security Panel Mounting Accessories


DSC Security Mounting Bracket A 1479518-1

RCS36 Security Mounting Panel - 1479540-1

A

B

D

A

(Security panel

not included)

Product Facts

:: Universal Equipment Panels:

... 1” x 1” grid pattern accepts audio,

video and accessory

modules with plastic push-pin

fasteners.... Creates raceway for cable

concealment and enhanced

aesthetics.

:: Equipment Mounting Shelf:

... Accommodates network electronics

such as able/DSL modems, routers

and switches.

(Recommended for RCS36.)

:: VELCRO Hold-Down Bracket:

... Used to secure network electronics,

such as cable/DSL routers.

Product Facts

:: DSC Security Mounting Bracket:

... Mounts on RCS14 & RCS36

universal equipment panels... Accommodates the following

DSC security modules:

:: 1555, 5010-, 5020, PC5204,

PC5080TC.

:: RCS36 Security Mounting Panel:

... Mounts in top or bottom of

RCS36 enclosure in place of

cover plate included with RCS36

equipment panel and video patch

panel.... Accommodates same DSC

security modules as the DSC

security

mounting bracket above.


AM

P N

ET

CO

NN

EC

T H

OM

E N

ET

-WO

RK

S


264



RE

FE

RE

NC

E


265

REFERENCE

Chapter Summary

:: This section provides illustrations

of typical applications for

AMP NETCONNECT cabling

products

:: Innerduct recommended handling

information

:: How to select the right fiber optic

connector

:: Application wiring diagrams, color

charts and die set to modular plug

cross-reference

ReferenceCentralized Network Administration . . . . . . . . . . . . . . . . . 266

Distributed Network Administration. . . . . . . . . . . . . . . . . . 267

Open Office Cabling Systems . . . . . . . . . . . . . . . . . . . 268-269

Backbone Cabling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 270

MT-RJ Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

110Connect System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272

AMP Communications Outlet System . . . . . . . . . . . . . . . . 273

Wireless Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274

Power Systems-Undercarpet Cabling . . . . . . . . . . . . . . . . 275

AMPINNERGY Modular Power Distribution System . . 276

Innerduct Handling and Installation Recommendations. 277

Innerduct Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278-279

How to Select the Right Fiber Optic Connector . . . . . . . 280

17

RE

FE

RE

NC

E


266

REFERENCE

Centralized Network Administration

Centralized Network Administration (CNA) is the premier

architecture offered by Tyco Electronics to address the

increasing operating costs of network administration and

the future requirement to easily and cost-effectively

migrate from the low-speed LANs of today to the high-

speed requirements of tomorrow.

CNA brings all-user connectivity to one centralized

closet/equipment room within the building versus

distributed closets throughout the building. Below is an

illustration of the components used in a typical CNA

system. Please refer to the page numbers listed for further

information.

Telecom ClosetData

Voice

HorizontalWork Area

Main Cross-connect

5

4321

6

7

6

8

1

9

Backbone

1 Cable assemblies

Fiber optic cable assemblies...............................pages 158-162

Twisted pair cable assemblies............................pages 163-167

2 Work area outlets

HIDEAWAY Outlet (shown) ......................................pages 58-60

110Connect...................................................................pages 41-56

AMP Communications Outlet (ACO) .....................pages 66-72

Access Floor Workstation Module (AFWM)........pages 83-86

SL Series .........................................................................pages 60-63

Surface Mount Outlet ..........................................................page 65

3 Connectors and inserts

MT-RJ .........................................................pages 36,122,170-172

SC or ST-Style........................pages 39, 41, 48, 60, 65,72,124

110Connect...................................................................pages 46-48

SL Series .........................................................................pages 36-40


4 Distribution cables, 90 meters max.

Fiber optic cable .............................................................page 11-12

Twisted pair cable........................................................pages 21-24

5 Splice enclosure......................................................pages 117-118

Splices....................................................................................page 180

6 Cross-Connect ..........................................................pages 148-154

110Connect XC ......................................................pages 151-154

6-110XC....................................................................pages 148-150

7 Backbone cables

Fiber optic.......................................................................pages 12-13

Twisted pair......................................................................page 21-24

8 Fiber optic enclosures ........................................pages 112-127

9 LAN Equipment ........................................................pages 209-217

RE

FE

RE

NC

E


267

REFERENCE

Distributed Network Administration

Distributed Network Administration (DNA) distributes LAN

electronics in telecommunications closets throughout the

building. This approach is typically required in twisted pair

cabling systems to bring the electronics to within 90

meters of each workstation. DNA provides better support

for multi-tenant buildings and departmental LANs as well

as offering the lowest installation cost.

Work Area

Telecom Closet

Backbone

Main Cross-connect

Data

Horizontal

12 34

6

1

5

7

8

7

5

61

Voice

1 Cable assemblies

Fiber optic cable assemblies...............................pages 158-162

Twisted pair cable assemblies............................pages 163-167

2 Work area outlets

HIDEAWAY Outlet (shown) ......................................pages 58-60

110Connect...................................................................pages 41-56


Access Floor Workstation Module (AFWM)........pages 83-86

FLEX-MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 88-92

SL Series .........................................................................pages 60-63

Surface Mount Outlet ..........................................................page 65


MT-RJ .........................................................pages 36,122,170-172

SC or ST-Style........................pages 39, 41, 48, 60, 65,72,124

110Connect...................................................................pages 46-48

SL Series .........................................................................pages 36-40



Fiber optic cable .............................................................page 11-12

Twisted pair cable........................................................pages 21-24

5 Fiber optic enclosures ........................................pages 112-127

6 LAN Equipment ........................................................pages 209-217

7 Cross-Connect ..........................................................pages 148-154

110Connect XC ......................................................pages 151-154

6-110XC....................................................................pages 148-150

8 Backbone cables

Fiber optic.......................................................................pages 12-13

Twisted pair......................................................................page 21-24

RE

FE

RE

NC

E


268

REFERENCE

Open Office Cabling Systems – Consolidation Point

TIA/EIA Standard - ANSI/TIA/EIA-568-B.1-2001 -

“Commercial Building Telecommunications Cabling

Standard, Part 1: General Requirements” defines two

styles of horizontal cabling systems specifically geared

towards modular furniture and the open office: the

consolidation point and the multi-user telecommunications

outlet assembly. Both of these cabling system practices

are designed to lessen the amount of “re-cabling” involved

in modular furniture moves.

Below is an illustration of a typical consolidation point

application. The consolidation point functions as an

interconnect between two sections of the horizontal

cabling: the main cabling from the telecommunications

closet and shorter distribution cables which serve outlets

in the work area. The consolidation point enclosure is

typically mounted in the ceiling or under access flooring.

When furniture moves are required, only the shorter cables

must be reconfigured. Consolidation point modules are

available for both optical fiber and twisted pair cabling.

1 Twisted pair cable assemblies ........................................................................................................................pages 163-167

2 Fiber optic cable assemblies ............................................................................................................................pages 158-162

3 Work area outlets

HIDEAWAY Outlet (shown) ..........................................................................................................................................pages 58-60

110Connect ......................................................................................................................................................................pages 41-56

AMP Communications Outlet (ACO)..........................................................................................................................pages 66-72

Access Floor Workstation Module (AFWM)............................................................................................................pages 83-86

SL Series..............................................................................................................................................................................pages 60-63

4 Consolidation point enclosure ..........................................................................................................................pages 99-106

Surface Mount Outlet ..............................................................................................................................................................page 65

5 Fiber optic distribution cables ................................................................................................................................page 11-13

6 Twisted pair distribution cables, 90 meters total ..................................................................................pages 21-24

7 Fiber optic enclosures ............................................................................................................................................pages 112-127

8 110Connect or SL Series patch panels ....................................................................................................pages 128-133

9 Transition cables ..................................................................................................................................................................page 107

Work Area

Horizontal1

2

345

6

7

8

9

Telecom Closet

RE

FE

RE

NC

E


269

REFERENCE

Open Office Cabling Systems – Multi-User Telecommunications Outlet Assembly

TIA/EIA Standard - ANSI/TIA/EIA-568-B.1-2001 -

“Commercial Building Telecommunications Cabling

Standard, Part 1: General Requirements” defines two

styles of horizontal cabling systems specifically geared

towards modular furniture and the open office: the

consolidation point and the multi-user telecommunications

outlet assembly. Both of these cabling system practices

are designed to lessen the amount of “re-cabling” involved

in modular furniture moves.

Below is an illustration of a typical Multi-User

Telecommunications Outlet Assembly (MUTOA)

application.TheMUTOA or simply MUO (for Multi-user

Outlet, the common term used in this catalog) ismeantto

be accessible to users and replaces individual work area

outlets. TIA/EIA-568-B.1 allows for the use of work area

patch cords longer than the 3 meters specified elsewhere

in the standard to accommodate multiple users. Each MUO

should be labeled with the longest allowable patch cord

according to the table below.

Length of horizontal cableMaximum length of Maximum combined length of work area

m (ft)work area cable cables, patch cords and equipment cables

m (ft) m (ft)

90 (295) 3 (10) 10 (33)

85 (279) 7 (23) 14 (46)

80 (262) 11 (36) 18 (59)

75 (246) 15 (49) 22 (72)

70 (230) 20 (66) 27 (89)

1 Twisted pair cable assemblies ........................................................................................................................pages 163-167

2 Fiber optic cable assemblies ............................................................................................................................pages 158-162

3 MUO (twisted pair) ......................................................................................................................................................page 108

4 MUO (fiber optic) ...............................................................................................................................................pages 108-109

5 Twisted pair distribution cables, 90 meters total ..................................................................................pages 21-24

6 Fiber optic distribution cables ................................................................................................................................page 11-13

7 110Connect or SL Series patch panels .....................................................................................................pages 128-133

8 Fiber optic enclosures.............................................................................................................................................pages 112-127

Work Area

Horizontal

4

35

1

6

7

8 2

Telecom Closet

RE

FE

RE

NC

E


270

REFERENCE

Backbone Cabling Systems

1 Fiber optic wall mount enclosures............pages 119-121,127

2 Cross-Connect .....................................................................pages 148-154

110Connect XC.................................................................pages 151-154

6-110XC...............................................................................pages 148-150

3 Backbone cables

Fiber optical cable...................................................................pages 12-13

Twisted pair cable.....................................................................page 21-24

4 Fiber optic enclosures...................................................pages 112-127

5 OSP or Indoor/Outdoor fiber optic cable .............pages 14-19

1

2

3

2

4

56

4

BUILDING #1

BUILDING #2

The intrabuilding (riser) and interbuilding (campus)

backbone cabling systems connect the various

telecommunications closets, intermediate cross-connects

and main cross-connects within the building and between

buildings on the campus. The riser system typically utilizes

high-pair-count UTP cables for voice and optical fiber cable

for data and video systems. In a Distributed Network

Administration (DNA) environment, each

telecommunications closet is typically supported by 12 to

24 optical fibers. In a Centralized Network Administration

(CNA) environment, the fiber count is much higher, with at

least a one-to-one interconnect (splice) between backbone

and horizontal fibers. The interbuilding backbone system

may support voice, data and video over outside plant

multimode and/or singlemode fiber. However, the use of

outside plant UTP cabling in support of voice may still

provide the most economical solution in certain

applications.

RE

FE

RE

NC

E


271

REFERENCE

MT-RJ Connector System

The MT-RJ Optical Fiber Cabling System is designed to

remove the last great hurdle in the way of economical

fiber networking: the size of the connectors and the

resulting price. The MT-RJ connector is a little smaller

than a standard phone jack, and it’s just as easy to

connect and disconnect. It’s half the size of the SC

connector it was designed to replace, so it offers twice

the port density of traditional fiber connectors, and it’s

designed to fit into conventional RJ45 faceplates and

patch panel cutouts, minimizing the equipment needed

for conversion to fiber. Fiber networking is more cost-

effective than ever. MT-RJ is the cabling system that’s

making it happen.

1235

6

1

5

7

8

1 MT-RJ cable assemblies ..................................pages 158-159

2 Outlets .................................................................................pages 36-90

3 MT-RJ outlet jacks ......................................pages 36, 170, 172

4 Horizontal fiber optic cables.............................pages 11,12

5 MT-RJ cross-connect products

MT-RJ patch panel jacks and accessories....pages 122-123

MT-RJ jack enclosures ....................................................page 125

Fiber optic enclosures..........................................pages 112-127

6 Fiber optic backbone cables...............................pages 12-13

7 Fiber optic enclosures .......................................pages 112-127

8 OSP or Indoor/Outdoor fiber optic cable ..pages 14-19

Work Area

Horizontal

Telecom Closet

Main Cross-connect

Backbone

RE

FE

RE

NC

E


272

REFERENCE

110Connect and SL Series Systems

The AMP NETCONNECT SL Series and 110Connect Systems

combine the easy termination of the 110-style punchdown

block with the proven performance characteristics of AMP

NETCONNECT modular jacks. Both systems offer a complete,

cost-effective means to cable a building for unshielded and

shielded twisted pair, optical fiber and coaxial applications. A

wide variety of work area outlet solutions is available

supporting twisted pair, optical fiber and coaxial applications.

Outlets include multiple styles of wall mount faceplates,

decorator and duplex mounting straps, FLEX-MODE

faceplates for modular furniture applications, Office Box

surface mount outlets and the Access Floor Workstation

Module (AFWM) products.

The 110Connect System also allows you to tailor the

telecommunications room to suit your needs, offering both

rack mount 19-inch patch panels and the 110Connect XC

backboard-mounted cross-connect.

The SL Series System has the advantage of higher port

desities at the outlet due to a smaller modular jack form factor

and adds the advantages of single port replacement to the

patch panel. This also allows individual termination of each

patch panel port with the SL Series Termination Tool,

speeding installtion. SL Series Discrete Patch Panels allow

custom, mix-and-match-style multimedia configurations.Telecom Closet

Horizontal

Data

Voice

Backbone

Work Area6

1 4 3 2 1

5

8

7

8

9

1 Cable assemblies

Fiber optic cable assemblies (not shown) .........................pages 158-162

Twisted pair cable assemblies ..............................................pages 163-167

2 Work area outlets

HIDEAWAY Outlet (shown) .........................................................pages 58-60

110Connect .....................................................................................pages 41-56

Access Floor Workstation Module (AFWM) ..........................pages 83-86

FLEX-MODE ......................................................................................pages 88-92

SL Series ............................................................................................pages 60-63

Surface Mount Outlet.............................................................................page 65


110Connect .....................................................................................pages 46-48

MT-RJ (not shown)....................................................pages 36,122,170-172

SL Series ............................................................................................pages 36-40


Fiber optic cable ................................................................................page 11-12

Twisted pair cable...........................................................................pages 21-24

5 110Connect or SL Series patch panels....................pages 128-133

6 LAN Equipment ...........................................................................pages 209-217

7 Cross-Connect .............................................................................pages 148-154

110Connect XC.........................................................................pages 151-154

6-110XC.......................................................................................pages 148-150

9 Backbone cables

Fiber optic (not shown) .................................................................pages 12-13

Twisted pair ........................................................................................page 21-24

RE

FE

RE

NC

E


273

REFERENCE

The AMP Communications Outlet (or more commonly

known as ACO) is a uniquely flexible cabling system that

provides two significant advantages over traditional “hard-

wired” modular jacks. The first is the ability to change the

connector interface at the work area outlet and at the patch

panel without having to re-terminate the horizontal

distribution cable. This allows the cabling system to adapt

to changing equipment requirements without the need to

re-certify the performance of the system. The “standard”

alternative to this is to make or purchase custom,possibly

longlead-time,cableassembliestoadaptan 8-positionjack

tosuityourequipment.Thesecondadvantage offered by

the ACO System is the easy ability to combine two

applications in the same 4-pair cable. Since most

communications applications require only one or two pairs

to operate, half of a standard hard-wired cable plant is

typically wasted. AMP Communications Outlet dual-jack

inserts allow an outlet to be changed from two 100BASE-T

stations to two ATM stations in minutes, again without the

need to re-terminate or re-certify the cable.

AMP Communications Outlet (ACO) System

Telecom Closet

Work Area Horizontal

Data

Voice

Backbone

1

3

6

5

7

8

9

1 2 3 4

1 Cable assemblies

Fiber optic cable assemblies (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 158-162

Twisted pair cable assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 163-167

2 AMP Communications Outlet (ACO)

Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 68-72,94

AMP Furniture Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 93-94

Access Floor Workstation Module (AFWM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 83-86

Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 67-68,93,140-141

Surface Mount Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 65

3 ACO inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 73-81


Fiber optic cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-12

Twisted pair cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 21-24

5 ACO patch panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 138-141

6 LAN Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 209-217

7 Cross-Connect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 148-154

110Connect XC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 151-154

6-110XC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 148-150

8 Cross-Connect cable assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 166-167

9 Backbone cables

Fiber optic (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 12-13

Twisted pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21-24

RE

FE

RE

NC

E


274

REFERENCE

Wireless SolutionsThe Wireless Solutions Group designs, manufactures, installs and provides ongoing support for wireless communication

networks throughout the United States. Don’t get left behind in this exciting new technology of broadband communications.

A technology as important to the computer professional today as the personal computer was ten years ago!

How to Evaluate Broadband Fixed Wireless

Connectivity for Your Network Application: With the growth of Internet data traffic going through the roof, and the abundant

provision of high capacity fiber optic backbones, the one and only remaining bottleneck is connecting businesses and

consumers to this new supply of bandwidth. Relieving this bottleneck requires flexible, scalable and economic network

solutions that can be installed on demand.

This is the defining opportunity for today: Only those able to meet this growing need with increasingly competitive prices

using rapidly deployable new infrastructure and launching new services will succeed. Broadband fixed wireless

technologies are emerging as an essential ingredient of the product mix to build these networks because they avoid

right-of-way delays and monopolies and most importantly, can deliver “fat pipes” directly to the user.

Building to Building

Building a bridge between networks in two or

more buildings often means overcoming

major barriers such as campus grounds,

Interstate highways, roads or rivers.

Deploying leased lines create high monthly

recurring costs, and using dial-up links

significantly reduce speeds, not to mention

the unwanted busy signals. The wireless

system provides high-speed wireless

bridging between buildings. Distances can

be as far as 30 miles (24 km) while your

network remains safe, secure, and reliable

without recurring monthly charges.

Indoor Networking

Mobility within the work environment has

become a necessity with today’s workforce.

Whether you’re moving employees, adding

additional workspace, or just don’t have

time for new cable installation, high-speed

wireless networking is the answer. The

indoor wireless system provides high-speed

network connectivity without cabling and

delivers speeds up to 11 Mbps. Functioning

in the same manner as a wired LAN, the

wireless LAN can be utilized by itself or as a

complement to an existing wired LAN. Your

network remains safe, secure, and reliable

without recurring monthly charges.

Turn-Key Installation and Support

Turn-Key Installation Service

WirelessSolutionsoffersexpert,turn-keyinstallationandongoing

technical support.Thisincludeseverythingnecessaryforasuccessful

installation, from the presale engineering analysis to the construction

of a tower structure or antenna mast. You are assured of a consistent,

quality installation. Our service alone is what put Wireless Solutions

in a class of its own.

Path analysis assures line-of-sight

Utilizing the Wireless Solutions path profile system analysis program,

our engineers are able to accurately calculate the required antenna

heights to achieve adequate line-of-sight for system operation. This

alleviates the guesswork that many vendors and resellers use when

attempting to install a system.

Your complete wireless solution

With thousands of units installed in hundreds of installations

nationwide, extended maintenance programs, ongoing technical

support, expert installation services, and industry-leading experience,

it’s easy to see why the Wireless Solutions group is the best choice

for your complete wireless solution.

RE

FE

RE

NC

E


275

REFERENCE

The Undercarpet Cabling System is a low profile, flexible

system that makes even the most complex office wiring

simple,economicalandbeautifullyinvisible.Whateveroffice

equipment may be needed can be handled with ease -

from desk lights to computer connections. And it’s

changeable! If you decide to change your office set-up, don’t

worry about the wiring. You can change it to fit your new

requirements just about as easily as you move the

furniture.

Take up a few sections of the modular carpeting (squares),

change the routing of the undercarpet cables and relocate

the floor fittings. Presto! You’re back in business.

With this system, all your power, voice and data networks

can be routed virtually anywhere under the carpet without

the restrictions encountered with underfloor ducts, walls,

partitions and power/data poles.

Undercarpet Power Legend

Universal Wall Box - Power

Combination Power/Data/Tel DCR

Tap (Step Down 5-Conductor to 3-Conductor)

Undercarpet Tel/Data Legend

Universal Wall Box - Tel/Data

Cable Legend

Undercarpet 5-Conductor Power Cable

Undercarpet 3-Conductor Power Cable

Category 5 - Data

Category 3 - Telephone Note: Only to be used withcarpet squaresmeeting the NationalElectrical Code.

1. Existing Floor Plan:

What you need to start is an outline of each area’s equipment requirements and the branch circuits needed to serve

them. This will tie in with a floor plan designed to combine efficiency with an attractive officescape.

2. Bill of Material Take-Off:

If the Undercarpet Cabling System is new to you, call in a Tyco Electronics sales engineer to explain the simple

planning required. Working from the building’s central cable distribution network, plus the preferred locations of all

equipment, you’ll come up with a layout sketch that locates all the equipment and the undercarpet circuits and

fittings needed to operate it. And this simple layout sketch can be used as both a working drawing for installation and

a reference for future system revisions.

3. Bid the Job:

Establish the contractors who’ll handle the installation. If necessary, your Tyco Electronics sales engineer will arrange

to train the contractors you have chosen. When their work is done, lay the modular carpeting and your office is ready

to function...most efficiently. And when a change is needed, it’s just as easy. Take up some carpet sections, have your

contractor rearrange the undercarpet components, then down with the carpet and you’re in business again.

How do you put it to work for you?

Power Systems-Undercarpet Cabling System

• Ideal for retail stores

• Highly suited for the “store-in-a-box” concept

since all power, voice and data wiring can

be pre-packaged in one box

• Eliminates need for trenching floors or drilling

through walls to run wiring

• No need to disturb adjacent stores in

shopping malls to gain access for pulling wires

• Better control of quality and work schedule

• Slab-on-grade, first floor areas

• Open lobby or customer reception areas

• Areas not easily accessible by traditional wiring methods

Primary Applications:

RE

FE

RE

NC

E


276

REFERENCE

AMPINNERGY Modular Power Distribution System

The AMPINNERGY Modular Power Distribution System can be used to deliver power to the workstations in raised floor

installations through AMP NETCONNECT Access Floor Workstation Modules, modular office systems furniture panels,

and other methods as allowed by codes. It may also be used to power the overhead lighting fixtures.

Power Transition Unit

Power Source hard wired in

101.60 X 101.60 [4" X 4"]Metal Box furnished by customer

Power Distribution Module

Junction Box 8-Wire and 5-Wire

Access Floor Workstation Module

Line Entry Cable Assembly, 5- and 8-wire

Multiplex Junction Box 8-Wire and 5-Wire

Note: Available in Lug Mount as well asother mountings for various panel types

Power Source hard wired using

Single-ended Cable Assembly

Flexible Power Connector Harnesses

5-Wire and 8-Wire. Lengths available tomeet customer requirements

2

3

4

5

7

8

6

1

The office of today and the office of

the future demand flexibility and

adaptability, along with reliability of

components, while offering

simplicity of moves and changes.

Access Floor Application

Modular Office Systems Furniture Application

Single-ended Power Cable Assemblyfrom Undercarpet Floor Mount Fixture

Power Entry Cable Assembly

Flexible Power Connector Cable Assembly

permits 90° cable routing

Plug-in Duplex Receptacle

Power Connector Cable Assembly for

straight runs on panels

1

2

3

4

5

Access Floor

Workstation Module

Snap-In

Mounting

4-Port PowerDistribution Module

AMPINNERGYMultiplex

Junction Box 6-Port PowerDistribution

Module

PowerTransition

Unit

PowerSource

Duplex

Note: Up tofour duplexes

possible

AccessFloor Work–

station Module.Line Entry

CableAssembly

For MoreInformation

See Pages 60-63

AMPINNERGYJunction Box

RE

FE

RE

NC

E


277

REFERENCE

Innerduct Handling & Installation Recommendations

Receiving:

When receiving the innerduct shipment at the job site

· Each pipe shipment should be inspected and inventoried with care upon arrival

· The pipe was inspected and loaded with due care at the factory using methods acceptable to the carrier. It is the

carrier's responsibility to deliver the shipment in good condition, and it is the receiver's responsibility to ensure that

there is no loss or damage

Unloading:

The means by which innerduct is unloaded in the field is the decision and the responsibility of the receiver. These

recommendations should be followed:

1. Remove restraints from the reels. These may be straps, ropes or chains with padding.

2. Using a forklift (or front end loader equipped with forks), remove the reels one at a time from the truck.

3. During the removal and handling, ensure that the reels do not make impact with other objects, especially in cold

weather.

4. Place innerduct reels on level ground.

5. Do not unload reels by hand. Care should be taken to ensure reels are not dropped or damaged.

Storage:

The following procedures are recommended to prevent damage to the innerduct pipe:

1. Store the pipe at the site in reels.

2. Do not stack large reels on top of each other.

3. When small reels are stacked, ensure that the weight of upper reel does not cause deformation to the lower reel.

4. Store lubricant under cover in tightly sealed containers.

5. Protect pipe interior and sealing surfaces from dirt and foreign matter.

6. If you anticipate storing the pipe outside under sunlight for over one year, we advise you cover it with canvas or

other opaque material, being sure to leave adequate air circulation underneath.

Handling:

The following procedures are recommended:

1. When using mechanical equipment, exercise care to prevent damage to pipe.

2. Lower pipes carefully from trucks and into trenches. Do not drop pipe.

3. In freezing temperatures, use caution to prevent impact damage. Handling methods considered acceptable for

warm weather are unacceptable during very cold weather. As the temperature approaches and drops below

freezing, the flexibility and impact resistance of HDPE pipe is reduced. Extra care should be used in handling in

cold weather. Extreme care should be used if innerduct is handled or installed in temperatures below 0°F (-18°C).

4. As with cold temperature, excessive heat can also affect innerduct flexibility, and while pipe affected in this

manner will retain its long-term performance properties, it should be handled with extra care. Avoid exposing the

pipe to welding torches, heaters, and if possible excessive sunlight, which will cause the pipe to discolor. Physical

properties such as pipe stiffness and tensile strength of Innerduct pipe are unaffected by surface discoloration.

However, impact resistance may be reduced slightly. As a result, extra care should be taken during installation and

backfilling. It should be noted that degradation does not continue after Innerduct pipe has been buried.

5. When distributing the pipe along a trench (stringing), place pipe on the opposite side of the trench from the

excavated earth. Place pipe with bell ends in the direction of the work progress.

Installation:

The following procedures are recommended:

1. Innerduct should be cut square using a hand or power saw. Be sure to remove all burs to ensure a proper joint.

2. Use recommended cements to join innerduct with couplings and accessories.

3. Innerduct can be installed in an open trench, direct plowed or installed using trench-less technology methods.

4. Innerduct expands and contracts with temperature changes. If the pipe is expected to contract after installation.

Be sure to snake the pipe in the trench. Conversely, the pipe should be installed straight if expansion is anticipated.

5. Both the bottom of the trench and all backfill materials must be free from stones, rocks, or other sharp debris that

may cause damage to the Innerduct.

RE

FE

RE

NC

E


278

REFERENCE

Innerduct Terms

ASTM:American Society for Testing and Materials - ATSM International is a not-for-profit organization that develops and publishes standards for materials, products, systems, and services used in research and development, product testing, quality systems, and commercial transactions.

ASTM F480-02:ASTM-F480-02 Standard “Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80”Specification that covers water well casing pipe and couplings made from thermoplastic materials. Defines requirements for Standard Dimension Ratios (SDR), Schedule 40 and Schedule 80 piping stated in inch-pounds. Refers to several other ASTM documents including D2241 and D1785 (full list of referenced documents: D256, D618, D638, D648, D653, D1527, D1600, D1784, D1785, D2122, D2235, D2241, D2282, D2412, D2444, D2564, D2855, D3122, D3965, D5092, F402, F412, D1892, D1898, E380, B1.5, B1.8, B1.9, FED-STD-123, MIL-STD-129, NSF 14 and NSF 61).

DR:Dimension Ratio - DR is the ratio of average outside pipe diameter to minimum wall thickness.

DR = (AVGOD/MINWT)

Where:DR = Dimension RatioAVGOD = Average Outside DiameterMINWT = Minimum Wall Thickness

The typical DR series (see SDR) established by ASTM-F480 is 13.5, 17, 21, 26, 32.5, and 41. The wall thickness is inversely proportional to the DR rating, in other words, the smaller the DR rating, the thicker the wall. In order to maintain constant stiffness, pressure rating and collapse strength, the wall thickness of a DR pipe must be increased with increasing diameter. Therefore, a pipe with either a 2" O.D. with ¼"wall thickness or 6" O.D. with ¾"wall thickness would both have a DR rating of 8. To find the pressure a DR pipe must be able to resist use the following equation:

P = 2•S/(DR -1)

Where:P = Pressure in psiS = Hydrostatic Design Basis (usually 4000psi) divided by the safety factor of 2.0 (as set forth by ASTM

D2241 and D1785)DR = Dimension Ratio (for D2241, substitute OD/WT for D1785)

HDPE:High-Density Polyethylene

RE

FE

RE

NC

E


279

REFERENCE

Schedule 40:A type of pipe with wall thicknesses defined by a schedule listed in ASTM D1785. The ratios of outside diameter to wall thickness of Schedule type piping vary from one size to the next. The ratios tend to be directly proportional or increase with increasing pipe diameter. Because of this, the hydraulic collapse pressure and pipe stiffness are not consistent for all sizes within a schedule. The stiffness and collapse pressure tend to decrease with increasing pipe diameter.

ASTM D1785 Schedule 40 Structural Requirements

NominalOutside Diameter Wall Thickness Pressure

in(mm) in(mm) Rating Size

Minimum Maximum Minimum Maximum psi (kPa)

1/2" 0.836 (21.24) 0.844 (21.44) 0.109 (2.77) 0.129 (3.28) 600 (4136.85)

3/4" 1.046 (26.57) 1.054 (26.77) 0.113 (2.87) 0.133 (3.38) 480 (3309.48)

1" 1.310 (33.27) 1.320 (33.53) 0.133 (3.38) 0.133 (3.89) 450 (3102.64)

1-1/4 " 1.655 (42.03) 1.665 (42.29) 0.140 (3.56) 0.160 (4.07) 370 (2551.06)

1-1/2 " 1.894 (48.11) 1.906 (48.41) 0.145 (3.68) 0.165 (4.19) 330 (2275.27)

2" 2.369 (60.17) 2.381 (60.47) 0.154 (3.91) 0.174 (4.42) 280 (1930.53)

2-1/2 " 2.864 (72.84) 2.882 (73.20) 0.203 (5.16) 0.227 (5.77) 300 (2068.43)

3" 3.492 (88.70) 3.508 (89.10) 0.216 (5.49) 0.242 (6.15) 260 (1792.64)

4" 4.491 (114.07) 4.509 (114.53) 0.237 (6.02) 0.265 (6.73) 220 (1516.85)

5" 5.553 (141.05) 5.573 (141.55) 0.258 (6.55) 0.289 (7.34) 190 (1310.00)

6" 6.614 (168.00) 6.636 (168.56) 0.280 (7.11) 0.314 (7.97) 180 (1241.06)

8" 8.610 (218.70) 8.640 (219.46) 0.322 (8.18) 0.361 (9.17) 160 (1103.16)

Schedule 80:A standard for pipe sizes that is rated for higher operating pressure than most SDR pipe at smaller diameters. As the pipe diameter of schedule 40 pipe increases, the maximum operating pressure rating drops steadily, unlike for SDR pipe.

ASTM D1785 Schedule 80 Structural Requirements

NominalOutside Diameter Wall Thickness Pressure

in(mm) in(mm) RatingSize

Minimum Maximum Minimum Maximum psi(kPa)

1/2" 0.836 (21.24) 0.844 (21.44) 0.147 (3.73) 0.167 (4.24) 850 (3998.96)

3/4" 1.046 (26.57) 1.054 (26.77) 0.167 (3.91) 0.174 (4.42) 690 (4757.38)

1" 1.310 (33.27) 1.320 (33.53) 0.180 (4.55) 0.200 (5.08) 630 (4343.70)

1-1/4 " 1.655 (42.03) 1.665 (42.29) 0.191 (4.85) 0.214 (5.43) 520 (3585.27)

1-1/2 " 1.894 (48.11) 1.906 (48.41) 0.200 (5.08) 0.224 (5.69) 470 (3240.54)

2" 2.369 (60.17) 2.381 (60.47) 0.218 (5.54) 0.244 (6.20) 400 (2757.90)

2-1/2 " 2.864 (72.84) 2.882 (73.20) 0.276 (7.01) 0.309 (7.85) 420 (2895.80)

3" 3.492 (88.70) 3.508 (89.10) 0.300 (7.62) 0.336 (8.53) 370 (2551.06)

4" 4.491 (114.07) 4.509 (114.53) 0.337 (8.56) 0.377 (9.58) 320 (2206.32)

5" 5.553 (141.05) 5.573 (141.55) 0.375 (9.52) 0.065 (10.66) 290 (1999.48)

6" 6.614 (168.00) 6.636 (168.56) 0.432 (10.97) 0.488 (12.29) 280 (1930.53)

8" 8.610 (218.70) 8.640 (219.46) 0.500 (12.70) 0.560 (14.22) 250 (1723.69)

SDR:Standard Dimension Ratio - A constant DR (Dimension Ratio, see DR) as defined in ASTM F480-02 (D2241) using the Preferred Numbers 13.5, 17, 21, 26, 32.5, and 41. The ratio of a given SDR series is a constant value regardless of actual pipe diameter.

SDR Structural Requirements

SDRPressure Rating

psi(kPa)

13.5 320.00 (2206.32)

17 250.00 (1723.69)

21 200.00 (1378.95)

25 166.66 (1149.08)

32.5 126.98 (875.50)

41 100.00 (689.48)

RE

FE

RE

NC

E


280

REFERENCE

How to Select the Right Connector

What connector is right for my job?

Use "no-epoxy, no-polish" LightCrimp Plus or MT-RJ jacks connectors for

• locations with low-fiber count cables such as small building backbones or at the outlet

• confined locations or locations without adequate power, lighting or ventilation

• installations with high-labor rates

• locations with a high turn-over rate of technicians

• for maintenance and rapid service restoration

• for performing moves, adds and changes

These connectors offer the advantages of:

• minimal set-up time

• lowest installation time per connector

• limited training required

• minimal consumable costs

Use "no-epoxy, polish" LightCrimp connectors for:

• locations with moderate fiber count cables such as building and campus backbones

• for installations with moderate-labor rates

• for installations with a stable, trained work force

• when stubbed connectors (no-epoxy, no-polish) connectors are not allowed by the customer

• when fusion splicing is not allowed by the customer


• moderate material cost

• low set-up time

• low consumable cost

• no epoxy curing required

Use "epoxy, polish" connectors for:

• locations with large fiber count cables such as main closets

• installations with low-labor rates and a stable, trained work force

• when stubbed connectors (no-epoxy, no-polish) connectors are not allowed by the customer

• when fusion splicing is not allowed by the customer


• lowest material cost

• a reduced epoxy/adhesive curing time option

IND

EX


281

INDEX

Chapter Summary

:: A complete listing of product

names and categories contained

within the catalog.

:: A complete breakdown of all

products and part numbers

contained in this catalog.

:: General reference information

Index:Product Name and Category Index ...............................282

Part Number Index ............................................................290

General Information ..........................................................298

18

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


282

INDEX

10/100 Fast Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

10/100BASE-Tx Impedance Matching Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . .188

110 Termination Tools . . . . . . . . . . . . . . . . . . . . .See - 110Connect Tools with Blades

110Connect Angled Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

110Connect Category 5e, 5 & 3 Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47

110Connect Discreet Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

110Connect Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-51

110Connect Flush Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53

110Connect Mounting Straps & Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55

110Connect Multimedia Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

110Connect Products . . . . .37, 46-56, 130-131, 137, 151-154, 167, 183, 241

110Connect System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272

110Connect Tools with Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241-242

110Connect XC Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153-154

110Connect XC Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

110Connect XC Cross-Connect Frame Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

110Connect XC Cross-Connect Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

110Connect XC Cross-Connect Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

110Connect XC Cross-Connect Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-154

110Connect XC Enhanced Category 5 Cable Assemblies . . . . . . . . . . . . . . . . . . .167

110Connect XC Rack Mount Cross-Connect Panel Kits . . . . . . . . . . . . . . . . . . . . .154

110Connect XC to RJ45 Enhanced Category 5 Cable Assemblies . . . . . . . . . .167

110Connect XC Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-152

12-Fiber MT-RJ Jack Module for Modular Consolidation Points . . . . . . . . . . . . .104

12-Fiber SC/SC Duplex Module for Modular Consolidation Points . . . . . . . . . .105

12-Fiber SC/ST-Style Duplex Module for Modular Consolidation Points . . . . .105

12-Fiber ST-Style/ST-Style Duplex Module for Modular Consolidation Points105

16-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211

16-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

19" Rack mount Chassis System for Ethernet Media Converters . . . . . . . . . . . .216

24-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211

24-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213

24-Port SNMP Managed Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214

25-Pair Connector Kits . . . . . . . . . . . . . . . . . .See - Category 3 25-Pair Connector Kits

4-Pair UTP Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

4-Position Data Connector to Modular Plug Adapters . . . . . . . . . . . . . . . . . . . . . . .187

5-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

6-110XC 4-Pair Punch Down Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

6-110XC Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

6110XC Category 6 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

6-110XC Category 6 Cross-Connect Products . . . . . . . . . . . . . . . . . . . . . . . . . .148-150

6-110XC Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

6-110XC Cross-Connect Frame Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

6-110XC Cross-Connect Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

6-110XC Rack Mount Cross-Connect Panel Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

6110XC to RJ45 Category 6 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

6-110XC Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

6-Port Modular Jack Modules for Modular Consolidation Points . . . . . . . . . . . . .104

8-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

8-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

AAccess Floor Workstation Modules and Accessories . . . . . . . . . . . . . . . . . . . . . .83-86

ACO Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

ACO Dual-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

ACO Dual-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

ACO Dual-Port Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

ACO Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69-72

ACO Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-81

ACO Low Profile Dual-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

ACO Modular Furniture Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

ACO Modular Furniture Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93-94

ACO Patch Panels . . . . . . . . . . . . .See - AMP Communications Outlet Patch Panels

ACO Products . . . . . . . . . . . . . . .See - AMP Communications Outlet (ACO) Products

ACO Single-Port Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

ACO Single-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

ACO Single-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

ACO Single-Port Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138-139

Active LAN Equipment . . . . . . . . . . . . . . . . . . . . . . .See - LAN Electronics and Wireless

Active Wall Mount Consolidation Point Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . .100

Adapter for 89D Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Adhesive Applicator Syringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

AMP CO Outlet System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

AMP Communications Outlet (ACO) Products . . . . . . . . . .66-59, 93-94, 138-141

AMP Communications Outlet Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . .138-141

AMP CORELINK Splice Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

AMP NETCONNECT Home Net-Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249-264

RCS36 Series Media Convergence Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

RCS36 Series Media Connectivity Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

RCS36 Series Media Outlet Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

RCS14 Series Media Convergence Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252

RCS14 Series Media Connectivity Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

RCS14 Series Media Outlet Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

RCS6 Series Media Convergence Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254

Faceplates & Mounting Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

Faceplate Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Passive Video Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Active Video Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

Satellite Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Video Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Coax Patch Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Audio Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

A-BUS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

Media Convergence Centers & Accessories . . . . . . . . . . . . . . . . . . . . . . . . .261-263

AMP-BARREL Wire Insertion Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

AMPINNERGY Modular Distribution Power System . . . . . . . . . . . . . . . . . . . . . . . . .220

AMPINNERGY Modular Power Distribution System . . . . . . . . . . . . . . . . . . . . . . . . .276

AMPTRAC Analyzer I/O Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199

AMPTRAC Branch (Mini) Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

AMPTRAC Connectivity System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195-206

AMPTRAC Connectivity System Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

Enterprise Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197

Branch (Mini) Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

Analyzer I/O Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


283

INDEX

Twisted Pair Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

Patch Panel Retrofit Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

Fiber Optic Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

UTP Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202

Fiber Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203

LAN Electronics Sensor Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204

iTracs Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205

AMPTRAC Connectivity System Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

AMPTRAC Enterprise Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197

AMPTRAC Fiber Optic Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

AMPTRAC Fiber Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203

AMPTRAC iTracs Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205

AMPTRAC LAN Electronics Sensor Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204

AMPTRAC Patch Panel Retrofit Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

AMPTRAC Twisted Pair Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

AMPTRAC UTP Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202

AMP-TY Nylon Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

BBackbone Cabling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270

Baluns See - Filters, Baluns and Adapters

Blank Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Buffer Tube Splitter Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Butt Set 247

CCable 9-24

Fiber Optic Cable and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-20

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Interconnect, 1-4 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Distribution, 6-12 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Distribution, 24-72 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Indoor/Outdoor, 4-12 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Indoor/Outdoor, 24-144 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Outside Plant Armored, 4-12 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Outside Plant Armored, 24-144 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Outside Plant Dielectric, 4-12 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Outside Plant Dielectric, 24-144 Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Buffer Tube Splitter Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Twisted Pair Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-24

Category 3 UTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Category 5 UTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Category 5e UTP (200 MHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Category 5e FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Category 5E UTP (350 MHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Category 6 UTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Category 6 FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Category 6E UTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157-168

Fiber Optic Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158-162

MT-RJ to MT-RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

MT-RJ to SC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

MT-RJ to ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

MT-RJ to LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

SC to SC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

SC to ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

SC to LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

ST-Style to ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

LC to LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

MT-RJ Pigtail Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

MT-RJ Pigtail Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

SC Pigtail Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

MT-RJ OTDR Test Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

MT-RJ Loopbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

Replacement Component for MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . .162

Twisted Pair Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163-167

Category 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

Enhanced Category 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163-164

Category 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164-165

Ethernet Crossover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165

Category 6 6-110XC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Category 6, RJ45 to 6-110XC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Enhanced Category 5 110Connect XC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

Enhanced Category 5 RJ45 to 110Connect XC . . . . . . . . . . . . . . . . . . . .167

Cable Assemblies, Copper . . . . . . . . . . . . . . . . . .See - Twisted Pair Cable Assemblies

Cable Assemblies, Fiber Optic . . . . . . . . . . . . . . . .See - Fiber Optic Cable Assemblies

Cable Assemblies, Twisted Pair . . . . . . . . . . . . .See - Twisted Pair Cable Assemblies

Cable Management Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155-156

Cable Management Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

Cable Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Cable Support Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Cable Support Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Category 3 25-Pair Connector Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Category 3 Keystone Jacks, Couplers & Faceplates . . . . . . . . . . . . . . . . . . . . . . .95-97

Category 3 Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Category 3 Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133-134

Category 3 UTP Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Category 5 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164-165

Category 5 Modular Plugs . . . . . . . . . . . . . . .See - Category 5e and 5 Modular Plugs

Category 5 Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132


Category 5e 110Connect Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-131

Category 5e and 5 Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Category 5e Cable Assemblies . . .See - Enhanced Category 5 Cable Assemblies

Category 5e FTP Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Category 5e Multi-User Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Category 5E SL Series Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Category 5e UTP (200 MHz) Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Category 5E UTP (350 MHz) Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Category 6 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

Category 6 FTP Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Category 6 Modular Plug Hand Tool and Die Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .243

Category 6 Modular Plugs and Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Category 6 SL Series Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128-129


PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


284

INDEX

Category 6E UTP Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Centralized Network Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266

CHAMP Category 3 Telco Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

CHAMP Telco Connectors and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Components for use with Undercarpet Power and Communications Systems222

Compression Tool for AMP-BARREL Edge Connectors . . . . . . . . . . . . . . . . . . . . . .245

Connectors169-184

Fiber Optic Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-180

Fiber Optic Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-178

No Epoxy, No Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 - 174

MT-RJ Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-171

MT-RJ SECURE Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

LightCrimp Plus Singlemode Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . .173

LightCrimp Plus Multimode Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

No Epoxy, Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

LightCrimp Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

Epoxy, Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176-178

Simplex SC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

Duplex SC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

ST-Style Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

LC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

Fiber Optic Adapters and Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179-180

MT-RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

SC179

SC to ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ST-Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

LC 180

CORELINK Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

Twisted Pair Plugs and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181-184

High Performance 8-Position Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . . .181

Category 6 Modular Plugs and Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Category 5e and 5 Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Category 3 Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Modular Plug Boots for Category 5e and 3, 8-Position Mod Plugs . . . . .183

External Strain Relief for Category 5e and 3, 8-Position Mod Plugs . . . .183

110Connect XC Cross-Connect Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

CHAMP Telco Connectors and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Category 3 25-Pair Connector Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Ratcheted Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

CHAMP Category 3 Telco Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Consolidation Points and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-107

Consolidation Points for Drop Ceilings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-101

Consolidation Points for Raised Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102-103

Contact Insertion/Extraction Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

Copper Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Twisted Pair Cable

CORELINK Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

Cross-Connect Connecting Blocks for Cross-Connect Consolidation Points . .106

Cross-Connect Consolidation Point and Accessories . . . . . . . . . . . . . . . . . . . . . . . .106

Cross-Connect Wiring Blocks for Cross-Connect Consolidation Points . . . . . . .106

DData Center Products . . . . . . . . . . . . . . . . . . . . . .See - SAN and Data Center Products

Desktop Monuments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Diagonal Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Distributed Network Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267

Duplex SC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

Duplex SC/SC Module for Fiber Optic MUO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Duplex ST-Style/Duplex ST-Style Module for Fiber Optic MUO . . . . . . . . . . . . . .109

Duplex ST-Style/SC Module for Fiber Optic MUO . . . . . . . . . . . . . . . . . . . . . . . . . . .109

EElectronics See - LAN Electronics and Wireless

Enhanced Category 5 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163-164

Enhanced Category 5 Modular Plugs . . . .See - Category 5e and 5 Modular Plugs

Enterprise Wireless Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

EPO-TEK Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

Epoxy and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234-235

Epoxy Curing Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

Epoxy, Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176-178

Epoxy/Polish Connector Termination Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

Epoxy/Polish LC Termination Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

Ethernet Crossover Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165

Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215-216

EtherSeal Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227

EtherSeal Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227

EtherSeal Connectivity System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223-228

EtherSeal Modular Jack and Coupler Outlet Kits . . . . . . . . . . . . . . . . . . . . . . . . .224

EtherSeal Modular Plug Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224

EtherSeal Stainless Steel Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225

EtherSeal Enclosures and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226

EtherSeal Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227

EtherSeal Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227

EtherSeal Enclosures and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226

EtherSeal Modular Jack and Coupler Outlet Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224

EtherSeal Modular Plug Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224

EtherSeal Stainless Steel Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225

External Strain Relief for Category 5e and 3, 8-Position Mod Plugs . . . . . . . . . .183

FFiber Optic Cable and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-20

Fiber Optic Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158-162

Fiber Optic Cable General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Fiber Optic Cleave Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Fiber Optic Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-180

Fiber Optic Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-178

Fiber Optic Couplers, Adapters and Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179-180

Fiber Optic Cross-Connect Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-127

Fiber Optic Distribution Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13

Fiber Optic Indoor/Outdoor Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15

Fiber Optic Interconnect Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Fiber Optic Multi-User Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Fiber Optic Outside Plant (OSP) Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-19

Fiber Optic Outside Plant (OSP) Dielectric Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19

Fiber Optic Outside Plant Armored (OSPA) Cable . . . . . . . . . . . . . . . . . . . . . . . . . .16-17

Fiber Optic Rack Mount Enclosures, Loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . .125-126

Fiber Optic Rack Mount Enclosures, Unloaded . . . . . . . . . . . . . . . . . . . . . . . . .114-118

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


285

INDEX

Fiber Optic Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230-232

Fiber Optic Wall Mount Enclosures, Loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Fiber Optic Wall Mount Enclosures, Unloaded . . . . . . . . . . . . . . . . . . . . . . . . . .119-121

Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Filters, Baluns and Adapters

Filters, Baluns and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185-188

Token Ring Media Filters and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

IBM AS/400 Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

IBM 3270 Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187

4-Position Data Connector to Modular Plug Adapters . . . . . . . . . . . . . . . . . . . .187

10/100BASE-Tx Impedance Matching Adapters . . . . . . . . . . . . . . . . . . . . . . . .188

Thinnet (10BASE2) Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

Fittings & Accessories Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

FLEX-MODE Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-92

Floor Boxes . . . . . . . . . . .See - Access Floor Workstation Modules and Accessories

GGigabit Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216

Grounding Lug Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

HHDPE Dual-Wall Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

HDPE Single-Wall Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

HDPE Solid Wall Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

HideAway Outlet and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-60

HideOut Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

High Performance 8-Position Modular Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Hinged Patch Panel Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Hinged Wall Mount Brackets for 19-inch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Home Net-Works A-BUS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

Home Net-Works Active Video Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

Home Net-Works Audio Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

Home Net-Works Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Home Net-Works Coax Patch Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Home Net-Works Faceplate Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Home Net-Works Faceplates & Mounting Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

Home Net-Works Media Convergence Centers & Accessories . . . . . . . . .261-263

Home Net-Works Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

Home Net-Works Passive Video Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Home Net-Works Products . . . . . . . . .See - AMP NETCONNECT Home Net-Works

Products

Home Net-Works RCS14 Series Media Connectivity Kits . . . . . . . . . . . . . . . . . . . .253

Home Net-Works RCS14 Series Media Convergence Center . . . . . . . . . . . . . . . .252

Home Net-Works RCS14 Series Media Outlet Kits . . . . . . . . . . . . . . . . . . . . . . . . . .253

Home Net-Works RCS36 Series Media Connectivity Kits . . . . . . . . . . . . . . . . . . . .251

Home Net-Works RCS36 Series Media Convergence Center . . . . . . . . . . . . . . . .250

Home Net-Works RCS36 Series Media Outlet Kits . . . . . . . . . . . . . . . . . . . . . . . . . .251

Home Net-Works RCS6 Series Media Convergence Center . . . . . . . . . . . . . . . . .254

Home Net-Works Satellite Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Home Net-Works Video Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Horizontal Finger Duct Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

Horizontal Ringed Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

How to Select the Right Fiber Optic Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

Hysol Epoxy-Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

IIBM 3270 Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187

IBM AS/400 Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

Icon Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-34

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Product Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Plenum 27

Riser 28

HDPE Dual-Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

HDPE Single-Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Fittings & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

HDPE Solid Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Innerduct Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278-279

Innerduct Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Innerduct Cutting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Innerduct Handling and Installation Recommendations . . . . . . . . . . . . . . . . . . . . .277

Innerduct Installation Recommendations . . . . . . . . . .See - Innerduct Handling and

Installation Recommendations

Innerduct Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Innerduct Product Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Inspection Microscope Kits and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .236-237

JKLLabel Covers for Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

Label Covers for Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Label Holders for Cross-Connect Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

Labeling and Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189-194

Labeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Standard Labels for Outlets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Label Covers for Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

Universal Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

Labels for Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Label Covers for Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

Labels for Cross-Connects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

Label Holders for Cross-Connect Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . .193

Labels for Cables and Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

Icon Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

Labeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Labels for Cables and Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

Labels for Cross-Connects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

Labels for Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

LAN Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - LAN Electronics and Wireless

LAN Electronics and Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209-218

Compact Ethernet Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210-211

5-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

8-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


286

INDEX

16-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211

24-Port Compact Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211

Smart Ethernet Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212-213

8-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

16-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

24-Port Smart Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213

SNMP Managed Ethernet Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214

24-Port SNMP Managed Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214

Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215-216

10/100 Fast Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

Gigabit Ethernet Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216

19" Rack mount Chassis System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216

Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

Enterprise Wireless Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

LC Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - LC Coupler

LC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

LC Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

LC to LC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

LightCrimp Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

LightCrimp Plus Buffer/Cable Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

LightCrimp Plus Multimode Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

LightCrimp Plus Singlemode Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173

LightCrimp Plus Termination Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

LightCrimp Termination Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231

LightCrimp Universal Cleave Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Loaded Rack Mount EnclosuresSee - Fiber Optic Rack Mount Enclosures, Loaded

Loaded Wall Mount Enclosures . . . . . . . .See - Fiber Optic Wall Mount Enclosures,

Loaded

MMini Multi-User Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Miscellaneous Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Modular Consolidation Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Modular Consolidation Points and Accessories . . . . . . . . . . . . . . . . . . . . . . . . .104-105

Modular Jack Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Modular Plug Boots for Category 5e and 3, 8-Position Mod Plugs . . . . . . . . . . .183

Modular Plug Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243-244

Modular Plugs . . . . . . . . . . . . . . . .See - Twisted Pair Modular Plugs and Accessories

MPO Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-113

MPO Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-121

MPO Trunk Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113-114

MRJ 21 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

MRJ 21 Cassette Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

MRJ 21 Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207-208

Cassette Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

MRJ 21 Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

MT-RJ Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

MT-RJ Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - MT-RJ Couplers

MT-RJ Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271

MT-RJ Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

MT-RJ Jack and Plug Pigtail Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . .122, 123, 161

MT-RJ Jack Module for Fiber Optic MUO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

MT-RJ Jack Termination Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

MT-RJ Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-171

MT-RJ Loopbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162, 233

MT-RJ OTDR Test Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161, 233

MT-RJ Outlet Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

MT-RJ Patch Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

MT-RJ Pigtail Jack Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

MT-RJ Pigtail Plug Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

MT-RJ Products . .36, 104, 109, 112, 123, 158-159, 161-162, 170, 179, 230,

232-233

MT-RJ SECURE Jack Pigtail Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

MT-RJ SECURE Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

MT-RJ SECURE Outlet Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

MT-RJ SECURE Patch Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

MT-RJ SECURE Products . . . .36, 112, 114, 123, 158-159, 161, 172, 179, 230

MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162, 232

MT-RJ to LC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

MT-RJ to MT-RJ Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

MT-RJ to SC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

MT-RJ to ST-Style Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

Multimedia Security Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Multi-User Outlets and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108-110

MUO See - Multi-User Outlets and Accessories

MUTO . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Multi-User Outlets and Accessories

MUTOA See - Multi-User Outlets and Accessories

NNo Epoxy, No Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 - 174

No Epoxy, Polish Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

OOpen Office Cabling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268-269

Open Office Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-110

Consolidation Points and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-107

Active Wall Mount Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Consolidation Points for Drop Ceilings . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-101

Consolidation Points for Raised Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . .102-103

Modular Consolidation Points and Accessories . . . . . . . . . . . . . . . . . .104-105

Modular Consolidation Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

6-Port Modular Jack Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

12-Fiber MT-RJ Jack Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

12-Fiber SC/SC Duplex Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

12-Fiber SC/ST-Style Duplex Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

12-Fiber ST-Style/ST-Style Duplex Module . . . . . . . . . . . . . . . . . . . . . . . . .105

Cross-Connect Consolidation Point and Accessories . . . . . . . . . . . . . . . . . .106

Cross-Connect Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Cross-Connect Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Transition Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Multi-User Outlets and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108-110

Mini Multi-User Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Category 5e Multi-User Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Fiber Optic Multi-User Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


287

INDEX

MT-RJ Jack Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

SL Series Discrete Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Duplex SC/SC Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Duplex ST-Style/SC Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Duplex ST-Style/Duplex ST-Style Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Optical Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Fiber Optic

Optical Fiber Cable . . . . . . . . . . . . . . . . . . . . . .See - Fiber Optic Cable and Accessories

Optical Fiber Cable General Information . . .See - Fiber Optic General Information

Optical Fiber Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Fiber Optic Connectors

PPalm Grip Hand Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

Palm Grip Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Patch Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Cable Assemblies

Patch Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Cable Assemblies

Patch Panel and Rack Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142-143

Pistol Grip Tool for AMP-BARREL Edge Connectors . . . . . . . . . . . . . . . . . . . . . . . . .244

Plenum Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Pocket Inspection Microscope and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Polishing Bushings, Curing Sleeves, and Strip Card Kit . . . . . . . . . . . . . . . . . . . . . .239

Polishing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

Portable "Butterfly" Hand Tool (MI-1) for CHAMP 25-Pair Connectors . . . . . . .244

Power and Undercarpet Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219-222

AMPINNERGY Modular Distribution Power System . . . . . . . . . . . . . . . . . . . . . .220

Raised Access Floor/Zone Wiring Distribution System . . . . . . . . . . . . . . . . . . .220

Undercarpet Power and Communications Systems . . . . . . . . . . . . . . . . . . . . . .221

Undercarpet Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221

Undercarpet Communications Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222

Components for use with Undercarpet Power and Communications

Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222

Power Systems-Undercarpet Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

PRO-CRIMPER II Hand Tool and Die Sets for Twisted Pair Applications . . . . . .243

PRO-CRIMPER II Hand Tool and Fiber Optic Die Sets . . . . . . . . . . . . . . . . . . . . . . . .240

Products for Wiremold™ Raceways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Pro-Installer Epoxy/Polish Connector Termination Tool Kits . . . . . . . . . . . . . . . . .231

Pro-Installer Twisted Pair Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

Pro-Installer's Modular Plug Hand Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243

Pro-Installer's Modular Plug Hand Tool Kits and Accessories . . . . . . . . . . . . . . . .244

RRack Mount Cable Management Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144-147

Rack Mount Cable Trough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

Rack Mount Enclosures . .See - Fiber Optic Rack Mount Enclosures, Loaded and

Unloaded

Raised Access Floor/Zone Wiring Distribution System . . . . . . . . . . . . . . . . . . . . . .220

Ratcheted Cable Clamps for CHAMP Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Reference 265-280

Centralized Network Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266

Distributed Network Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267

Open Office Cabling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268-269

Backbone Cabling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270

MT-RJ Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271

110Connect System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272

AMP CO Outlet System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

Wireless Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274

Power Systems-Undercarpet Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

AMPINNERGY Modular Power Distribution System . . . . . . . . . . . . . . . . . . . . . .276

Innerduct Handling and Installation Recommendations . . . . . . . . . . . . . . . . . .277

Innerduct Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278-279

How to Select the Right Fiber Optic Connector . . . . . . . . . . . . . . . . . . . . . . . . . . .280

Replacement Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Replacement Component for MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

Replacement Components for MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233

Residential Products . . . . . .See - AMP NETCONNECT Home Net-Works Products

Riser Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

SSAN and Data Center Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-121

SAN Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - SAN and Data Center Products

Sapphire-Tipped Scribe Tool and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

SC Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - SC Couplers

SC Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

SC Pigtail Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

SC to LC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

SC to SC Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

SC to ST-Style Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

SC to ST-Style Coupling Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

SC, ST-Style, LC and Misc. Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124-125

Simplex SC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

SL Series Category 5e & 3 Toolless Modular Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .38

SL Series Category 6, 5E & 3 110Connect Modular Jacks . . . . . . . . . . . . . . . . . . . .37

SL Series Discreet Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-136

SL Series Discrete Module for Fiber Optic MUO for Fiber Optic MUO . . . . . . . .109

SL Series Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

SL Series Jack Termination Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

SL Series Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41-43

SL Series Mounting Straps and Office Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45

SL Series Multimedia Jacks and Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-40

SL Series Products . . . . . . . . . . . . . . . . . . . . . . . .36-45, 109, 128-129, 135-136, 241

Smart Ethernet Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212-213

Snap-in Adapter Plates and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122-125

SNMP Managed Ethernet Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214

SPIRAP 156

Split Loom 156

Stainless Steel Faceplates from SEMTRON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56

Standard Labels for Outlets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Stationary, Ventilated Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

ST-Style Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - ST-Style Couplers

ST-Style Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

ST-Style Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ST-Style to ST-Style Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

Surface Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Surface Mount Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

SVGA Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


288

INDEX

TT-Handle Wire Insertion Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

Telecommunications Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111-156

Fiber Optic Cross-Connect Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-127

SAN and Data Center Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-121

MPO Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-113

MPO Trunk Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113-114

Unloaded Rack Mount Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114-118

Unloaded Wall Mount Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119-121

Snap-in Adapter Plates and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .122-125

MT-RJ Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

MT-RJ Patch Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

MT-RJ SECURE Patch Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

MT-RJ Jack and Plug Pigtail Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

MT-RJ SECURE Jack Pigtail Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

SC, ST-Style, LC and Misc. Adapter Plates . . . . . . . . . . . . . . . . . . . . .124-125

Loaded Rack Mount Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125-126

Loaded Wall Mount Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Twisted Pair Patch Panel Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128-127

Category 6 SL Series Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128-129

Category 5E SL Series Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Category 5e 110Connect Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . .130-131

Category 5 Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Category 3 Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133-134

SL Series Discreet Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135-136

110Connect Discreet Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

AMP Communications Outlet Products . . . . . . . . . . . . . . . . . . . . . . . . . .138-141

ACO Single-Port Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138-139

ACO Single-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

ACO Dual-Port Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

ACO Dual-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

Patch Panel and Rack Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142-143

Adapter for 89D Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Grounding Lug Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Cable Support Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Cable Support Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Blank Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Stationary, Ventilated Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Hinged Patch Panel Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Hinged Wall Mount Brackets for 19-inch Panels . . . . . . . . . . . . . . . . . . . . . . .143

Rack Mount Cable Management Products . . . . . . . . . . . . . . . . . . . . . . . . . .144-147

Horizontal Finger Duct Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

Vertical Finger Duct Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144-145

Horizontal Ringed Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

Vertical Ringed Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

Rack Mount Cable Trough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

Vertical Management Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

Cable Management Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

Twisted Pair Cross Connect-Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148-154

6-110XC Category 6 Cross-Connect Products . . . . . . . . . . . . . . . . . . .148-150

6-110XC Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

6-110XC Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

6-110XC Cross-Connect Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

6-110XC Cross-Connect Frame Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

6-110XC Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

6-110XC Rack Mount Cross-Connect Panel Kits . . . . . . . . . . . . . . . . . . . .150

110Connect XC Cross-Connect Products . . . . . . . . . . . . . . . . . . . . . . . .151-154

110Connect XC Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

110Connect XC Wiring Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151-152

110Connect XC Cross-Connect Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

110Connect XC Cross-Connect Frame Kits . . . . . . . . . . . . . . . . . . . . . . . . .153

110Connect XC Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . .153-154

110Connect XC Rack Mount Cross-Connect Panel Kits . . . . . . . . . . . .154

Cable Management Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155-156

Velcro™ Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

AMP-TY Nylon Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Split Loom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

SPIRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

Thinnet (10BASE2) Baluns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

Token Ring Media Filters and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

Tone Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Tone Tracer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Tools 229-248

Fiber Optic Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230-232

Universal No Epoxy Termination Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

MT-RJ Jack Termination Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

LightCrimp Plus Termination Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

LightCrimp Termination Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231

Pro-Installer Epoxy/Polish Connector Termination Tool Kits . . . . . . . . . . .231

Epoxy/Polish Connector Termination Tool Kits . . . . . . . . . . . . . . . . . . . . . . . .232

Epoxy/Polish LC Termination Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

Replacement Components for MT-RJ Test Kits . . . . . . . . . . . . . . . . . . . . . . . .233

MT-RJ OTDR Test Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233

MT-RJ Loopbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233

EPO-TEK Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

TRA-CON Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

Hysol Epoxy-Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

Adhesive Applicator Syringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

Polishing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

Epoxy Curing Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

Inspection Microscope Kits and Accessories . . . . . . . . . . . . . . . . . . . . .236-237

Pocket Inspection Microscope and Accessories . . . . . . . . . . . . . . . . . . . . . . .237

Sapphire-Tipped Scribe Tool and Accessories . . . . . . . . . . . . . . . . . . . . . . . . .237

LightCrimp Plus Buffer/Cable Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

LightCrimp Universal Cleave Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Fiber Optic Cleave Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

AMP CORELINK Splice Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Universal Fiber Optic Cleaving Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Polishing Bushings, Curing Sleeves, and Strip Card Kit . . . . . . . . . . . . . . . .239

PRO-CRIMPER II Hand Tool and Fiber Optic Die Sets . . . . . . . . . . . . . . . . . .240

Twisted Pair Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241-248

SL Series Jack Termination Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

Pro-Installer Twisted Pair Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

110Connect Tools with Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241-242

PR

OD

UC

T N

AM

E &

CA

TE

GO

RY

IND

EX


289

INDEX

Replacement Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

6-110XC 4-Pair Punch Down Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Palm Grip Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Cable Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

Diagonal Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

PRO-CRIMPER II Hand Tool and Die Sets for Twisted Pair Applications243

Category 6 Modular Plug Hand Tool and Die Set . . . . . . . . . . . . . . . . . . . . . .243

Pro-Installer's Modular Plug Hand Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243

Pro-Installer's Modular Plug Hand Tool Kits and Accessories . . . . . . . . . .244

Pistol Grip Tool for AMP-BARREL Edge Connectors . . . . . . . . . . . . . . . . . . .244

AMP-BARREL Wire Insertion Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

Compression Tool for AMP-BARREL Edge Connectors . . . . . . . . . . . . . . . .245

Portable "Butterfly" Hand Tool (MI-1) for CHAMP 25-Pair Connectors .244

Palm Grip Hand Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

Contact Insertion/Extraction Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

T-Handle Wire Insertion Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

4-Pair UTP Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

Butt Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

Tone Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Tone Tracer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Miscellaneous Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

Innerduct Cutting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

TRA-CON Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

Transition Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Twisted Pair Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-24

Twisted Pair Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163-167

Twisted Pair Cross Connect-Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148-154

Twisted Pair Modular Plugs and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .181-184

Twisted Pair Patch Panel Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128-127

Twisted Pair Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241-248

UUndercarpet Communications Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222

Undercarpet Power and Communications Systems . . . . . . . . . . . . . . . . . . . . . . . . .221

Undercarpet Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221

Universal Fiber Optic Cleaving Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Universal Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

Universal No Epoxy Termination Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

Universal Office Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Unloaded Rack Mount Enclosures . . . . .See - Fiber Optic Rack Mount Enclosures,

Unloaded

Unloaded Wall Mount Enclosures . . . . .See - Fiber Optic Wall Mount Enclosures,

Unloaded

VVelcro™ Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Vertical Finger Duct Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144-145

Vertical Management Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

Vertical Ringed Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

WWall Mount Enclosures . . .See - Fiber Optic Wall Mount Enclosures, Loaded and

Unloaded

Wireless Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

Wireless Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274

Work Area Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62-63

Work Area Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-98

SL Series Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-45

MT-RJ Outlet Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

MT-RJ SECURE Outlet Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

SL Series Category 6, 5E & 3 110Connect Modular Jacks . . . . . . . . . . . . . .37

SL Series Category 5e & 3 Toolless Modular Jacks . . . . . . . . . . . . . . . . . . . . .38

SL Series Multimedia Jacks and Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-40

SL Series Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41-43

SL Series Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

SL Series Mounting Straps and Office Boxes . . . . . . . . . . . . . . . . . . . . . . . .44-45

110Connect Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-56

110Connect Category 5e, 5 & 3 Modular Jacks . . . . . . . . . . . . . . . . . . . .46-47

110Connect Multimedia Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

110Connect Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-51

110Connect Angled Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

110Connect Flush Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53

110Connect Mounting Straps & Faceplates . . . . . . . . . . . . . . . . . . . . . . . .54-55

Stainless Steel Faceplates from SEMTRON . . . . . . . . . . . . . . . . . . . . . . . . . .55-56

Universal Office Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

HideAway Outlet and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-60

HideOut Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Multimedia Security Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Work Area Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62-63

SVGA Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Surface Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Modular Jack Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Products for Wiremold™ Raceways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Surface Mount Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

AMP Communications Outlet (ACO) Products . . . . . . . . . . . . . . . . . . . . . . . . .66-59

ACO Dual-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

ACO Low Profile Dual-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

ACO Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69-72

ACO Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-81

ACO Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Access Floor Workstation Modules and Accessories . . . . . . . . . . . . . . . . . . .83-86

Desktop Monuments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

FLEX-MODE Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-92

ACO Modular Furniture Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93-94

ACO Single-Port Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

ACO Single-Port Faceplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

ACO Modular Furniture Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Category 3 Keystone Jacks, Couplers & Faceplates . . . . . . . . . . . . . . . . . . . .95-97

Work Area Outlet Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-98

XYZZone Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See - Open Office Systems

PA

RT

NU

MB

ER

IND

EX


290

INDEX

57240 21

57241 21

57242 21

57243 21

57814 21

57815 21

57825 23

57826 23

58424 240

58433 240

58532 240

58551 240

58552 240

58568 244

83935 50

83936 50

122533 244

219152 165

219153 165

219159 165

219172 107

219173 107

219174 107

219175 107

219184 163

219197 164

219198 164, 255

219199 164

219201 164

219202 164

219203 164

219204 165

219205 165

219206 165

219207 165

219208 165

219214 164

219215 165

219241 163

219242 163

219243 163

219244 163

219245 163, 255

219246 163, 255

219246 163, 255

219513 22

219538 22

219560 23, 251

219567 23

219596 107

219597 107

219598 107

219599 107

219884 163

219885 163

219886 163

219887 163

219888 163

219889 163, 255

219890 163, 255

219891 163

224928 243

228433 235

229378 245

229384 246

229451 246

229764 246

229912 184

229913 184

230238 246

231652 243

231666 244

231890 245

406058 60

406089 68

406090 68

406091 67, 141

406185 51

406186 59

406187 58

406188 59

406245 60

406247 60

406330 130

406331 130

406332 130

406343 48

406344 48

406345 48

406346 48

406351 82

406352 67, 141

406356 139

406357 139

406358 139

406359 139

406360 93, 140

406361 93, 140

406363 139

406365 139

406367 139

406369 139

406370 139

406372 46

406373 47

406375 47

406376 84

406388 93, 140

406389 93, 140

406390 130

406397 82

406483 163

406498 146

406771 104, 106

406772 104

406788 105

406789 105

406790 105

406817 108

406818 110

406819 111

406820 111

406896 60

406955 74

406956 74

406957 75

406981 130

435033 113

435034 113

435035 113

492019 159

492020 160

492025 240

492026 240

492081 161

492123 176

492193 161

492322 231

492414 236

492426 236

492458 178

492543 231

492591 160

492622 240

492623 240

492674 238

492697 230

492703 237

492749 236

492782 240

492783 240

500000 156

500001 156

500002 156

500004 156

500005 156

500013 156

500015 156

500017 156

500023 156

500024 156

500030 156

500031 156

500036 156

500037 156

501195 234

501258 231

501380 178

501381 179

502129 235

502134 235

502222 235

502259 239

502308 235

502418 234

502579 178

502580 178

502604 72

502631 239

502632 179

502656 239

502750 235

502776 179

502780 179

502964 236

502965 236

502966 236

502967 236

502968 236

502969 236

502970 236

502977 236

503085 118

503086 118

503137 179

503162 160

Part NNo. Page NNo. Part NNo. Page NNo. Part NNo. Page NNo. Part NNo. Page NNo.

PA

RT

NU

MB

ER

IND

EX


291

INDEX

503273 179

503304 239

503330 231

503337 239

503567 240

503568 240

503571 178

503577 180

503613 178

503662 72

503681 180

503698 240

503699 240

503706 231

503746 232

503890 240

503901 180

503910 240

503911 240

503948 176

503957 231

503995 160

503997 61

503998 61

503999 61

504021 179

504035 234

504064 237

504290 237

504614 179

504629 61

504640 60, 181

504641 61

504643 61

504646 176

504647 176

504655 177

504656 177

504657 177

504662 60, 181

504663 60, 181

504909 176

504929 177

504932 176

504969 159

504971 159

504989 177

552706 184

553912 184

553913 184

553983 95

554169 182

554170 182

554171 95

554546 95

554547 184

554578 95

554720 182

554739 182

554875 184

554876 184

554877 184

554878 184

554905 184

555042 182

555043 134

555049 96

555050 96

555051 96

555052 96

555174 182

555175 182

555177 182

555249 184

555269 143

555273 143

555275 143

555276 143

555322 95

555346 134

555366 134

555370 134

555375 134

555376 96

555377 96

555383 134

555384 97

555386 97

555417 182

555426 182

555480 134

555481 134

555482 134

555483 134

555500 133

555501 133

555502 133

555503 133

555522 133

555524 133

555601 67, 141

555611 79

555614 79

555617 79

555621 78

555625 78

555631 81

555642 80

555643 77

555644 80

555650 69, 71

555669 78

555670 70

555672 77

555725 82

555982 188

556029 97

556030 97

556090 141

556151 95

556152 95

556166 95

556167 95

556180 134

556183 134

556186 134

556189 134

556205 143

556222 87

556245 139

556246 139

556247 139

556263 87

556340 69

556438 136, 142

556560 147

556561 147

556562 147

556574 70

556598 71

556599 71

556625 96

556627 96

556641 134

556679 94

556680 94

556706 245

556742 142

556744 95

556745 147

556797 133

556905 134

556965 143

556968 133

557243 81

557272 76

557280 75

557284 75

557315 182

557322 86

557350 65

557361 65

557364 65

557366 65

557396 143

557403 133

557411 133

557415 133

557474 86

557502 49

557505 49

557548 142

557557 94

557558 94

557560 76

557601 84

557655 86

557685 65

557691 50

557751 92

557772 65

557775 65

557776 65

557827 165

557857 186

557913 65

558086 51

558088 49

558106 88

558107 88

558176 194

558191 90

558198 194

558199 194

558248 88

558249 88

558251 63

558257 133

558258 133

558259 133


IND

EX


292

INDEX

558265 147

558266 143

558267 143

558268 143

558269 143

558281 186

558299 156

558301 142

558312 147

558329 145

558331 145

558334 146

558357 90

558400 151

558401 106, 151

558402 106, 151

558417 193

558418 241

558420 188

558421 188

558476 91

558488 91

558489 91

558492 91

558493 91

558510 69

558512 70

558527 183

558530 181

558635 153, 154

558637 154

558639 153, 154

558716 84

558717 85

558718 85

558821 194

558838 142

558839 152

558840 106, 152

558841 151

558842 151

558843 151

558856 86, 137

558861 86, 137

558862 86, 137

558907 75

558908 73

558909 74

558912 81

558913 76

558914 77

559066 118

559089 117

559165 117

559369 146

559370 146

559371 146

559496 119, 121

559501 119, 121

559515 124

559516 124

559517 124

559523 125

559533 118

559542 115

559552 116

559558 124

559560 119

559561 119

559575 125

559596 124

559601 124

559614 116

569049 145

569127 90

569278 181

569332 47

569389 150

569431 154

569432 152

569433 152

569434 152

569438 152

569439 152

569440 152

569444 152

569445 152

569446 152

569477 183

569478 183

569479 183

569480 183

569499 63

569523 167

569524 167

569525 167

569526 167

569527 167

569528 167

569530 182

569532 182

569542 182

569550 181

569552 181

569590 142

569597 150

569599 154

569646 86

569648 86

569669 167

569672 167

569673 167

569685 167

569686 167

569687 167

569851 150, 154

569852 150, 154

569853 153

569854 153

569855 153

569856 153

569857 153

569858 153

569875 183

569916 86

569917 86

569949 242

569983 86, 137

603227 155

604751 155

604771 155

604772 155

608046 91

608441 92

641337 182

737893 181

769016 86

769020 86

769021 86

769028 86

790163 243

853400 243

856727 244

1116412 251

1435018 20

1435019 20

1435020 20

1435021 20

1435370 197

1435371 197

1435372 197

1435608 201

1435736 28

1435737 27

1435739 31

1435740 32

1435741 32

1435742 32

1435743 32

1435744 32

1435749 29

1435750 29

1435751 29

1435752 29

1435753 29

1435754 29

1435755 27

1435756 27

1435757 27

1435758 33

1435759 33

1435760 33

1479540 263

1479600 224

1499033 24

1499038 24

1499171 22

1499172 22

1499389 24

1499416 24

1499418 22

1499419 22

1591020 216

1591022 216

1591024 215

1591026 215

1591028 215

1591030 215

1591032 216

1591034 216

1591036 210

1591038 212

1591040 212

1591042 212

1591044 212

1591046 212


PA

RT

NU

MB

ER

IND

EX


293

INDEX


1591050 212, 213

1591052 212, 213

1591054 212, 213

1591056 212, 213

1591058 214

1591060 214

1591062 214

1591068 212

1591070 211

1591072 211

1591082 214

1591084 214

1591086 214

1591088 214

1591092 213

1591700 217

1591710 217

1664000 11

1664001 11

1664002 11

1664003 11

1664004 11

1664005 11

1664006 11

1664007 11

1664008 11

1664009 11

1664010 11

1664011 11

1664012 11

1664013 11

1664014 11

1664015 11

1664016 11

1664017 11

1664018 11

1664019 11

1664020 11

1664021 11

1664022 11

1664023 11

1664024 11

1664025 11

1664026 11

1664027 11

1664028 11

1664029 11

1664030 11

1664031 11

1664032 11

1664033 11

1664034 11

1664035 11

1664036 12

1664037 12

1664038 12

1664039 12

1664040 12

1664041 12

1664042 12

1664043 12

1664044 12

1664045 12

1664046 12

1664047 12

1664048 12

1664049 12

1664050 12

1664051 12

1664052 12

1664053 12

1664054 14

1664055 14

1664056 14

1664057 13

1664058 13

1664059 13

1664060 13

1664061 13

1664062 13

1664063 13

1664064 13

1664065 13

1664066 13

1664067 13

1664068 13

1664069 13

1664070 13

1664071 13

1664072 13

1664073 13

1664074 13

1664075 13

1664076 13

1664077 13

1664078 13

1664079 13

1664080 13

1664081 13

1664082 13

1664083 13

1664084 13

1664085 13

1664086 13

1664087 13

1664088 13

1664089 13

1664090 13

1664091 13

1664092 14

1664093 14

1664094 14

1664095 14

1664096 14

1664097 14

1664098 14

1664099 14

1664100 14

1664101 14

1664102 14

1664103 14

1664104 14

1664105 15

1664106 15

1664107 15

1664108 15

1664109 15

1664110 15

1664111 15

1664112 15

1664113 15

1664114 15

1664115 15

1664116 15

1664117 15

1664118 15

1664119 15

1664120 15

1664121 15

1664122 15

1664123 15

1664124 15

1664125 15

1664160 16

1664161 16

1664162 16

1664163 16

1664164 16

1664165 16

1664166 16

1664167 16

1664168 16

1664169 16

1664170 16

1664171 16

1664172 17

1664173 17

1664174 17

1664175 17

1664176 17

1664177 17

1664178 17

1664179 17

1664180 17

1664181 17

1664182 17

1664183 17

1664184 17

1664185 17

1664186 17

1664187 17

1664188 17

1664189 17

1664190 19

1664191 19

1664192 19

1664193 19

1664194 19

1664195 19

1664196 19

1664197 19

1664198 19

1664199 19

1664200 19

1664201 19

1664202 19

1664203 19

1664204 19

1664205 19

1664206 19

1664207 19

1664208 19

1664209 19

1664210 19

1664211 18

1664212 18

1664213 18

1664214 18

1664215 18

1664216 18


PA

RT

NU

MB

ER

IND

EX


294

INDEX

1664217 18

1664218 18

1664219 18

1664220 18

1664221 18

1664222 18

1664230 14

1664231 14

1664232 15

1664233 14

1664234 14

1664235 14

1664236 14

1664238 15

1085 CT 245

1-0E-A5-PHONE-DP 55

1116044 192

1116098 65

1116111 65

1116315 48

1116360 87

1116406 42

1116407 43

1116408 42

1116409 42

1116410 42

1116412 39

1116496 48

1116498 48

1116515 46

1116535 61

1116554 48

1116571 242

1116580 88

1116603 38

1116604 38

1116616 54, 251

1116617 54, 251

1116618 54, 251

1116695 86

1116697 63

1116698 63

1116700 83

1116732 132

1116733 132

1116734 132

1116741 104

1116749 136

1116753 136

1206114 125

1206138 125

1206144 126

1206145 126

1206146 126

1206704 125

1278009 174

1278017 179

1278022 230

1278023 237

1278027 159

1278028 158

1278030 158

1278031 158

1278032 158

1278033 158

1278079 174

1278080 174

1278082 174

1278118 230

1278126 158

1278127 158

1278128 158

1278132 237

1278134 237

1278153 162, 232, 233

1278199 159

1278207 160

1278219 238

1278298 159

1278303 122, 171

1278323 119

1278328 122

1278346 230

1278357 162, 233

1278358 162, 233

1278368 124

1278414 36, 170

1278415 36, 170

1278418 112

1278471 236

1278567 124

1278568 48

1278755 121

1278807 122, 172

1278808 122, 172

1278810 36, 172

1278811 36, 172

1278861 162, 232

1278862 162, 232

1278863 162, 232

1278873 158

1278874 158

1278875 158

1278876 158

1278877 158

1278878 158

1278879 158

1278880 158

1278881 159

1278882 159

1278883 159

1278884 159

1278890 158

1278891 158

1278892 158

1278893 158

1278894 158

1278895 158

1278896 158

1278897 158

1278898 159

1278899 159

1278900 159

1278901 159

1278949 230

1278997 232, 236

1339015 38

1339054 45

1339057 45

1339118 43

1339119 43

1339120 44, 251

1339121 40, 251

1339123 39

1339124 40

1339188 38

1339189 38

1348876 114

1348960 125

1374018 123, 161

1374019 123, 161

1374020 123, 161

1374205 60

1374206 60

1374208 123

1374463 124

1374503 230

1374526 121

1374613 160

1374615 160

1374645 159

1374646 159

1374647 159

1374657 160

1374658 160

1374659 160

1375005 89

1375006 89

1375013 128

1375014 129

1375015 129

1375016 128

1375049 64

1375050 64

1375055 251

1375055 37

1375092 194

1375093 104

1375119 136

1375123 41

1375149 39, 251

1375155 51

1375157 38

1375158 144

1375159 144

1375160 144

1375161 144

1375162 144

1375163 144

1375164 144

1375165 145

1375166 144

1375167 145

1375187 37, 251

1375188 37

1375189 37

1375190 37, 251

1375191 251

1375191 37

1375192 37

1375193 37

1375200 38

1375202 181

1375204 181

1375216 261

1375241 41


PA

RT

NU

MB

ER

IND

EX


295

INDEX

1375253 155

1375254 155

1375255 155

1375256 155

1375257 144

1375258 145

1375259 144

1375260 145

1375272 261

1375288 89

1375289 135

1375290 135

1375291 135

1375292 135

1375300 261

1375306 41

1375307 241

1375308 241

1375309 242

1375310 242

1375317 242

1375345 191

1375347 109

1375351 192

1375352 192

1375353 191, 192

1375354 193

1375355 193

1375356 190

1375357 190

1375358 191

1375359 40

1375360 40

1375361 40

1375362 40

1375363 40

1375364 40

1375365 40

1375366 40

1375367 104

1375368 115

1375376 108

1435005 112

1435006 112

1435024 113

1435025 113

1435027 113

1435028 113

1435029 113

1435031 113

1435032 113

1435033 113

1435035 113

1435036 113

1435037 113

1435039 113

1435040 115

1435049 143

1435065 112

1435066 112

1435067 112

1435069 112

1435070 113

1435071 113

1435092 162, 233

1435094 162, 233

1435096 162, 233

1435128 120

1435129 127

1435130 127

1435161 116

1435172 115

1435180 112

1435181 112

1435187 116

1435326 200

1435327 200

1435329 201

1435335 204

1435336 199

1435338 197

1435340 204

1435341 204

1435342 204

1435344 204

1435345 204

1435346 204

1435346 204

1435351 203

1435352 203

1435353 203

1435355 203

1435356 203

1435357 203

1435360 200

1435363 200

1435367 200

1435368 200

1435374 199

1435429 113

1435430 113

1435431 113

1435435 113

1435436 113

1435437 113

1435440 122

1435467 127

1435488 199

1435516 124

1435555 114

1435556 115

1435557 116

1435558 116

1435581 112

1435593 201

1435594 201

1435621 199

1435622 200

1435623 200

1435624 200

1435625 200

1435631 200

1435632 200

1435633 200

1435634 200

1435652 117

1435653 201

1435657 201

1435658 200

1435659 200

1435660 200

1435661 200

1435672 201

1435673 201

1435684 201

1435685 201

1435686 199

1435687 201

1435688 201

1435689 201

1435724 203

1435725 203

1435726 203

1435735 39

1435737 27

1435738 30

1435756 33

1435759 33

1435764 248

1435779 204

1435784 200

1435785 200

1435788 201

1435789 203

1435790 203

1435791 203

1435792 203

1435793 203

1435794 203

1435795 203

1435796 203

1435797 203

1435799 39

1435808 118

1435815 202

1435818 204

1435819 204

1435820 204

1435827 204

1435834 202

1435835 202

1435839 118

1435839 118

1435843 199

1435844 199

1435845 199

1435846 199

1435860 202

1435861 202

1435862 202

1435863 202

1435864 202

1435918 202

1435919 202

1457567 180

1457628 232

1457630 232

1475072 160

1479002 194

1479003 194

1479004 255

1479005 255

1479006 255

1479007 258

1479008 258

1479009 258

1479014 261

1479039 101

1479040 100

1479041 101


PA

RT

NU

MB

ER

IND

EX


296

INDEX

1479042 102

1479079 41

1479086 40

1479109 262

1479116 262

1479139 47

1479140 47

1479144 108

1479145 132

1479146 132

1479147 132

1479152 251

1479152 52, 251

1479153 129

1479154 129

1479155 129

1479156 129

1479158 102

1479159 55, 251

1479160 55, 251

1479161 250

1479162 250

1479181 39

1479190 40, 251

1479191 40, 251

1479200 253, 254

1479204 109

1479206 131

1479208 131

1479230 39, 251

1479231 39, 251

1479232 39, 251

1479240 107

1479241 107

1479245 106, 148

1479246 106, 148

1479247 148

1479248 149

1479249 149

1479250 149

1479251 106, 149

1479252 149

1479253 149

1479254 149

1479255 149

1479256 149

1479257 149

1479258 149

1479259 149

1479260 149

1479261 149

1479265 166

1479266 166

1479267 166

1479268 191

1479278 253, 254

1479281 253, 254

1479282 263

1479283 258

1479284 263

1479285 255

1479286 258

1479287 61

1479288 41

1479297 103

1479305 82

1479306 141

1479306 67, 141

1479307 68

1479309 138

1479310 138

1479311 138

1479312 138

1479313 138

1479314 138

1479315 138

1479316 138

1479317 93, 140

1479318 93, 140

1479333 250

1479334 256

1479335 256

1479336 257

1479337 257

1479338 258

1479339 259

1479343 253, 254

1479344 253, 254

1479347 253, 254

1479348 250

1479349 250

1479350 250

1479358 57

1479359 102

1479360 103

1479382 100

1479392 260

1479393 260

1479395 260

1479396 260

1479398 57

1479400 130, 131

1479401 128

1479402 143

1479425 253, 254

1479426 253, 254

1479437 263

1479438 255

1479440 263

1479441 255

1479443 52, 251

1479444 52, 251

1479445 53, 251

1479446 53, 251

1479447 53, 251

1479449 135

1479450 135

1479451 208

1479452 208

1479486 43

1479488 57

1479489 57

1479490 57

1479494 57

1479495 57

1479496 57

1479504 44, 251

1479506 125

1479510 131

1479511 129

1479512 135

1479513 129

1479514 131

1479515 129

1479516 135

1479517 129

1479518 263

1479534 260

1479552 37

1479554 250

1479555 250

1479556 255

1479557 255

1479561 224

1479562 224

1479563 224

1479564 224

1479565 224

1479566 224

1479569 226

1479573 136

1479574 136

1479582 143

1479583 224

1479584 224

1479585 224

1479586 224

1479591 224

1479592 224, 227

1479593 225

1479594 225

1479595 225

1479596 225

1479599 224

1479601 227

1479602 227

1479603 227

1479604 227

1479622 150

1479623 150

1479624 150

1479625 251

1479625 55, 251

1479654 226

1479655 226

1479656 226

1479657 226

1479658 226

1479682 224

1479683 224

1479696 104

1479717 37

1479732 143

1479733 143

1479734 130

1479735 128

1479738 136

1479739 136

1490490 242

1490530 247

1490531 248

1490532 247

1490533 248

1499023 163

1499094 163

1499110 164

1499111 164

1499112 164

1499113 164

1499114 164


PA

RT

NU

MB

ER

IND

EX


297

INDEX

1499115 164

1499116 164

1499117 164

1499118 164

1499150 165

1499151 165

1499413 166

1499414 166

1499447 227

1499448 227

1499449 227

1499450 227

1499452 251

1583236 241

1588077 161, 233

1588078 161, 233

1588079 161, 233

1588080 161, 233

1588175 240

1588176 232, 240

1588291 174

1588292 174

1588568 123, 161

1588569 123, 161

1588570 123, 161

1588571 123, 161

1588572 158

1588573 158

1588644 159

1588706 178

1588708 178

1588710 178

1588712 178

1588719 159

1588720 112

1588724 113

1588756 232

1588849 161

1588849 123, 161

1588878 122, 172

1588879 122, 172

1588880 122, 171

1588880 171

1591090 210

1591304 198

1644027 73

1644031 73

1671000 126

1693087 113

1693276 173

1693278 173

1693414 158

1693532 161

1693532 123, 161

1693533 123, 161

1693949 122, 172

1693951 122, 172

1725062 242

1725150 241

1751386 208

1751405 208

1754074 232

1754252 36, 172

1754269 114

1754270 114

1754271 114

1754272 114

1754273 114

1754274 114

1754275 114

1754276 114

1754277 114

1754278 114

1754279 114

1754280 114

1754281 114

1754282 114

1754283 114

1754284 114

1754285 112

1754286 112

1754287 112

1754288 112

1754384 160

1754399 160

1754400 161

1754401 161

1754402 161

1754404 161

1754406 158

1754407 158

1754408 158

1754409 158

1754410 158

1754411 158

1754412 158

1754413 158

1754421 114

1754422 114

1754423 114

1754424 114

1754425 114

1754426 114

1754427 114

1754428 114

1FM-(4)0E-AMP 56

1FM-(6)0E-AMP 56

1FM-00E-AMP 55

219198 164, 255

219200 164

219889 163, 255

219890 163, 255

230238 246

230328 245

231652 243

231662 244

354940 243

406042 142

406091 141

406339 48

406350 82

406352 141

406360 140

406361 140

406388 140

406389 140

406390 130

406641 150, 154

406981 130

492065 161

492642 174

492643 174

500ACO 71

501818 239

502305 235

502306 235

502748 235

503605 238

503692 175

503693 175

503705 238

503924 238

504000 175

504001 175

504034 175

504618 236

504640 179

504662 179

504663 179

504958 160

552705 184

555195 187

555242 187

555329 187

555330 187

555414 187

555601 141

555645 80

556438 142

556965 142

557429 137

557430 137

558471 89

558635 153, 154

558639 153, 154

558840 152

558856 137

558860 137

558861 137

558862 137

559433 121

559532 118

559557 124

569851 150, 154

569852 150, 154

569983 137

608440 92

853400 243

CM2-U2AMP 64

HUBACO 71

U135806 85

U135820 85

U135830 85

U135840 85


EN

GIN

EE

RIN

G N

OT

ES


298

ENGINEERING NOTES

EN

GIN

EE

RIN

G N

OT

ES


299

ENGINEERING NOTES

GE

NE

RA

L IN

FO

RM

AT

ION


300

GENERAL INFORMATION

Pair Jacket Color Band Color

1White Blue Tip

Blue White Ring

2White Orange Tip

Orange White Ring

3White Green Tip

Green White Ring

4White Brown Tip

Brown White Ring

Fiber or Tube Number Fiber or Tube Color

1 Blue

2 Orange

3 Green

4 Brown

5 Slate

6 White

7 Red

8 Black

9 Yellow

10 Violet

11 Rose

12 Aqua

13 Blue-black

14 Orange-black

15 Green-black

16 Brown-black

17 Slate-black

18 White-black

19 Red-black

20 Black-black

21 Yellow-black

22 Violet-black

23 Rose-black

24 Aqua-black

Group PairConductor

Band ColorJacket Color

1White Blue Tip

Blue White Ring

2White Orange Tip

Orange White Ring

White 3White Green Tip

Green White Ring

4White Brown Tip

Brown White Ring

5White Slate Tip

Slate White Ring

6Red Blue Tip

Blue Red Ring

7Red Orange Tip

Orange Red Ring

Red 8Red Green Tip

Green Red Ring

9Red Brown Tip

Brown Red Ring

10Red Slate Tip

Slate Red Ring

11Black Blue Tip

Blue Black Ring

12Black Orange Tip

Orange Black Ring

Black 13Black Green Tip

Green Black Ring

14Black Brown Tip

Brown Black Ring

15Black Slate Tip

Slate Black Ring

16Yellow Blue Tip

Blue Yellow Ring

17Yellow Orange Tip

Orange Yellow Ring

Yellow 18Yellow Green Tip

Green Yellow Ring

19Yellow Brown Tip

Brown Yellow Ring

20Yellow Slate Tip

Slate Yellow Ring

21Violet Blue Tip

Blue Violet Ring

22Violet Orange Tip

Orange Violet Ring

23Violet Green Tip

VioletGreen Violet Ring

24Violet Brown Tip

Brown Violet Ring

25Violet Slate Tip

Slate Violet Ring

Ring Wire

Tip Wire

Band

Twisted Pair

4-Pair UTP Color Code

Multi- fiber Color Code

25-Pair UTP Color Code

GE

NE

RA

L IN

FO

RM

AT

ION


301

GENERAL INFORMATION



Color Pantone® Color Description

Orange 150C Demarcation point

Green 353C Cable terminations at the demarcation point made on the customer side

Purple 264C Cable terminations originating from common equipment

Red 184C Key telephone systems terminations

White WhiteCable terminations made at both ends of the backbone that originate in

the main cross-connect

Gray 422CCable terminations made at both ends of the backbone that do not

originate in the main cross-connect

Brown 465C Cable terminations at both ends of the inter-building backbone

Blue 291CHorizontal cable terminations in the Telecommunications Room or the

Equipment Room

Yellow 101CCable terminations of other circuits (alarms, security, or energy

management, etc.)

Pro-Crimper II Category 6 Pro-Installer’s High Performance,

8-Position6-Position, 4- & 6-

Hand ToolModular Modular Plug 8-Position

Die SetLong Body Position

Plug Die Set Hand Tool Die Set Die Set Line Die Set

Modular Plug 58532-1 790163-2 2-231652-0 1-853400-0 853400-1 853400-7 853400-8

1375202-X - - - - -

1375204-X - - - - -

554169-X - - - - -

554170-X - - - - -

554710-X - - - - -

554720-X - - - - -

555042-X - - - - -

555174-X - - - - -

555175-X - - - - -

555177-X - - - - -

555178-X - - - - -

555179-X - - - - -

555417-X - - - - -

555426-X - - - - -

556985-X - - - - -

558530-X - - - - -

569278-X - - - - -

569550-X - - - - -

569552-X - - - - -

EIA/TIA-606-A Color Code

Die Set to Modular Plug Cross-Reference

GE

NE

RA

L IN

FO

RM

AT

ION


302

GENERAL INFORMATION

T568A and T568B Wiring Diagrams for Modular Plugs and Jacks

T568A Wiring

Application Wiring Diagrams for Modular Jacks

Tip

Ring

Tip

Ring

Note: All of the applications listed above (as well as most other communications applications) can be implemented on both

T568A and T568B jacks.

T568B Wiring

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

P a i r P a i r

P a i r

P a i r P a i r P a i r

P a i r

P a i r P a i r P a i r

1 0 / 1 0 0 B A S E - T 1 0 / 1 0 0 B A S E - T T o k e n R i n g 1 5 5 M b p s A T M /T P - P M D

WARRANTY IT’S STANDARD EQUIPMENT

Quality products. Reliable performance.Delivered with a 25-year warranty.:: We are confident that your AMP NETCONNECT system will keep performing to current industry standards. If ever it does not

meet those standards within 25 years of the date of installation, we’ll

provide the reasonable parts and labor to replace

or repair the AMP NETCONNECT product.

... 25 years coverage on system performance

... 25 years coverage on components

... 25 years coverage on applications

... Based on industry standards

... Includes parts and labor

... Tyco Electronics provides coverage directly to the end user— if something is wrong, Tyco Electronics will make it right

It’s Standard Equipment

:: It's standard equipment with our end-to-end-solutions. We're confident that our products and systems will keep performing to cur-

rent industry standards. If something goes wrong or they ever don't meet those standards within 25 years of

installation, we'll fix things so they do. You have our word and warranty on it.

Who’s Covered

:: Unlike most system suppliers, Tyco Electronics provideswarrantycoveragedirectlytotheenduser.

:: Many suppliers provide coverage to the installers, who then provide coverage to the customers. But with the

Tyco Electronics warranties, there are no middlemen. The warranties are between you and Tyco Electronics.

Some conditions may apply. Please call 1-800-553-0938 for more information. Outside the U.S., please contact your local AMP NETCONNECT sales office.

WARRANTY TWENTY-FIVE YEARS FROM NOW, YOU’LL THANK US

* Some conditions may apply. AMP NETCONNECT Home Net-Works Systems qualify for a 25 year componentwarranty only. For more information, please visit www.ampnetconnect.com or call 1-800-553-0938.

Outside the U.S., please contact your local AMP NETCONNECT product sales office.

25 Year System Performance Coverage

We are confident that your AMP NETCONNECT cabling system will keep

performing to current TIA/EIA 568B industry standards. If it ever fails to meet those

standards within 25 years of the date of installation, we'll provide

the reasonable parts and labor to replace or repair the AMP NETCONNECT product.*

25 Year Component Coverage

Tyco Electronics also offers a 25 Year Component Warranty to protect

individual AMP NETCONNECT cabling system components. If a component

fails within 25 years of the date of installation, we'll provide the reasonable

parts to replace or repair the registered AMP NETCONNECT product.*

It’s Standard Equipment

This coverage is automatically part of the package when you specify AMP NETCONNECT products

end-to-end and when a Tyco Electronics-authorized NETCONNECT Design & Installation (ND&I)

contractor registers the network project with Tyco Electronics and performs the actual installation

in accordance with Tyco Electronics requirements.*

Who’s Covered

Unlike most system suppliers, Tyco Electronics provides warranty coverage directly to the end user.

Many suppliers provide coverage to the installers, who then provide coverage to the customers.

But with the Tyco Electronics warranties, there are no middlemen. The warranties are between

you and Tyco Electronics.

��

��

�

��

�


amp net connect catalog full

Documents