american international flanged pipe and fittings
TRANSCRIPT
-
7/26/2019 American International Flanged Pipe and Fittings
1/2
Flanged Pipe and Fittings
-
7/26/2019 American International Flanged Pipe and Fittings
2/2
ACIPCO supplies 100mm through 1,600mm ductile iron flanged pipe in accordance with ISO 2531. Maximum length
of flanged pipe is 5.9m; any length less than 5.9m can be furnished down to the minimum practical length varying
with pipe size.
Flanged pipe is generally specified for aboveground service for air, water, sewage, and other liquids where rigid,
restrained joints are needed. It is widely used in industrial piping systems, pump stations, water treatment plants,sewage treatment plants, and for other interior piping.
Long runs of flanged pipe should normally include a provision for expansion and contraction such as flexible joints or
couplings at strategic intervals.
Pipe may be furnished with one end flanged and the other end with Fastite bell, plain end, or other type end as
may be required.
The underground use of the flanged joint is generally not desirable due to the rigidity of the joint.
Ductile iron pipe barrels conform to the requirements of ISO 2531. Unless otherwise specified, flanges for ductileiron pipe are ductile in accordance with ISO 2531.
Flanges conform to the chemical and physical properties specified for ductile iron fittings in ISO 2531.
Flanged pipe supplied is shop fabricated. Job site flange fabrication is not recommended.
FLANGE PIPE
ACIPCO 33 International Pipe Manua
Flanged Pipe & Fittings
100 K12 7.2 118 220 200 5.9 118
150 K12 7.8 170 285 200 5.9 186
200 K12 8.4 222 340 200 5.9 263
250 K12 9 274 400 200 5.9 351
300 K12 9.6 326 455 230 5.9 448
350 K12 10.2 378 520 250 5.9 558
400 K12 10.8 429 580 250 5.9 679
450 K12 11.4 480 640 280 5.9 807
500 K12 12 532 715 300 5.9 951
600 K12 13.2 635 840 300 5.9 1261
700 K12 14.4 738 910 300 5.9 1580
800 K12 15.6 842 1025 292 5.9 1971
900 K12 16.8 945 1125 360 5.9 2373
1000 K12 18 1048 1255 460 5.9 2860
1200 K12 20.4 1255 1485 460 5.9 3943
1400 K12 22.8 1462 1685 510 5.9 5060
1500 K12 24 1565 1820 510 5.9 5894
1600 K12 25.2 1668 1930 530 5.9 6800
SIZE(mm)
THICKNESSCLASS
WALLTHICKNESS
(mm)
PIPEO.D.(mm)
FLANGEO.D.(mm)
MINIMUMLENGTH(mm)
MAXIMUMLENGTH(m)
MASS5.9 Meter Length with
Two PN16 Flanges (kg)