amada • strippit/lvd • finnpower • nisshinbo • … style hd, & series 90 are registered...
TRANSCRIPT
COLE ENGINEERED
C.E. TOOLING 3Section
Tooling Booklet
See Section 1 For Technical Information
Amada • Strippit/LVD • Finnpower • Nisshinbo • Boschert • Etc... STRIPPIT® is a Registered Trade Mark of the Idex Corporation Inc.
THICK TURRET (AT) TOOLING
Section-3 Page 2 Mar-11
COLE ENGINEERED
Page
EUROMACH, FINPOWER, MATRIX: Multi Tools + Nova™ 27-32
METRIC: Amada Style NCT, & Z-Tool Style Station A-F 8-16
S80/INCH Style Original Inch-S80 & Old Style Tooling 18,19, 22-25
S90/HP Style HD, & Series 90 are registered trade marks of Wilson Tool 20-26
Ultra® Style Tools Ultra Tec, Ultra XT, & XTM are regestered trade mark of Mate Precision Tooling 7, 12, 14,
16
METRIC: Amada Style Air Blow, NCT, & Z-Tool Style Station A-E 8-11 &17
Accessories: Sec.-1 Coining 33 Multi-Tools Nisshinbo —> Finnpower style see Booklet 6 Adapters: request Drop-In Holders & Tools 27
Alignment Tools 3 Ejectors 3
Ball Riding / Lifter Dies 31 Embossing - Extrusions 30&33 Shears
Blade Inserts & Holders 5 Slug Ejectors 3
Card Guide 31 Form Tools 30-35 Special Shapes 35
Center Punch 33 Half Shear 33 Standard Shapes 4
Stiffening Rib Tools 31
Charactor Marking Insert Style 34 Stripper-Guide Adhesive Disks 3
Clearance Chart Sec-1 Keying - Standard Locations 4
Coatings: Technical Info. Sec-1 Lances & Louvers 31 Tapping Unit
25-29
3
Sec-11
Index of Tooling- Holders Styles
PUNCH Easier stripping and reduced gauling as we extend 1/4°(1/8° per side) Back Taper. Cutting Edge and
Corners have .003 honed radius.
Stripper Plates Relived .04 - .12 depending on station. Extends greater punch tip grind life.
Dies Types: To allow the slug to fall through die land, a taper relief is given to allow slug to pass though with little drag.
Standard Round Straight + Positive Option S/O Option S/F Round Die Standard Slug Z Hugger Slug Trap/Free
S/F
Character Markng Accepts Replaceable Character Insert
Adapters Use small station tools in larger tool stations
Mar-11 Section-3 Page 3
COLE ENGINEERED
Punch Sharpening Fixture
WORK HOLDER
PARTS Save! up to
Sq. & Rt Shown Sq. & Rt Shown
OPTIONAL PUNCH SHEARS
Best all purpose shear for reducing
tonnage requirement Nibbling must be
performed at 75% of punch size to avoid
side loading.
An all purpose shear. Ideal for
nibbling.
An all purpose shear. Ideal for nibbling. Used over Inverted Shear when punching heavy plate.
Best Shear for slotting tools, 3”
or longer in length.
Reduces tonnage requirements while
reducing slug deformation. Requires a very Ridged Press.
A Shear suggested for all diagonal dimensions over 2”/50.8mm with widths >.375/9.53mm
Roof Top *ARTS $12
Inverted *AIS $15
Concave *ACS $28
Double Inverted
*ADIS $28
Whisper (1-Way)
*AWS $10
Spiracle *ASPS $10
Ideal for rounds or squares less than 1.18
30,m. Lessens tool side loading &
“Easy to sharpen”!
Stripper / Guide Dia. Qty Part# Price 1/2 .87 10 pcs *A06082
1-1/4 1.75 10 pcs *A06084
3-1/2 3.67 10 pcs *A06086 4-1/2 4.67 10 pcs *A06088
Reduces marring of material by the stripper. Just peel off adhesive backing, and attach to stripper face. Use
sharp knife blade to cut out stripper opening.
2” 2.2 10 pcs *A06085
STRIP GUARD Adhesive Disks
ALIGNMENT TOOLS
Dwg:\cnc-jobp\ALN-TOOL.2d
KEYS: Turret-Guides
See Section 11 Booklet
Slug Ejectors By default holes are placed in punch tip sizes >.270”/6.86mm
EJECTOR For Hole Size
Clover Round 4W,2W,2B
.078/2mm *AEJ-R2 50pc $
.109/3mm *AEJ-C3 6mm-.25” *AEJ-C6 *AEJ-R7 50pc $
.394/10mm *AEJC10
.594/15mm
Above shows Option of
Alignment Bar
Amada Machine
Parts See our
Section 11 booklet.
½” Sta. A keyed ATA-ALIGN-PD ½” A non-keyed ATA-ALIGN-PD2
Not shown, used with keyed unit, to align multi-3 die holder. keyed unit placed in outer non-keyed in inner
1-¼ Sta. B ATB-ALIGN-PD 2-½ Sta. C ATC-ALIGN-PD
3-½” Sta. D ATD-ALIGN-PD 4- ½” Sta. E ATE-ALIGN-PD
Also available as option is feature to allow attachment of align‐ment bar. This used to align Index (C‐axis) or Multi‐Tool or turret styles that have bolt station holders (Ex. Finnpower) Operator uses dial indicator on magnetic base (not included) to move axis and
bring orientation with in .001”/.025mm Add $90.00 to basic alignment tool (+ ‐ab to above part#) . Alignment bar used for all stations part# *A‐ALIGN‐bar $75.00
Section-3 Page 4 Mar-11
COLE ENGINEERED
ADDITIONAL COSTS FOR NON-STANDARD OPTIONS Add 25% to set
price for Clearance of .003 (.08mm) & Less.
PUNCHES Corners 1-3 X # 4(all) With Length under 1.625 and any size Radius or Chamfer # X $10.00 $10.00 With Length over 1.625 & .032 maximum Radius or Chamfer # X $10.00 $30.00 With Length over 1.625 and Radius or Chamfer over .032(,8mm) # X $15.00 $40.00 Add On To All DIES any size Radius or Chamfer # X $10.00 $10.00 No Extra Charge for STRIPPERS or When Ordered As A Set
RADIUS CHAMFER RADIUS OR 45°CHAMFERS + $ per corner
Widths or Dia. Under .093(2,36mm) Add 30% to set price. Widths or Dia. Under .062(1,57mm) Add 50% to set price. Widths or Dia. Under .046(1,2mm) Add 100% to set price. Included in add on cost; Dies are produced with .090 land then a 1.5° relief is given to prevent multiple slugs from stacking causing excessive pressure on punch. Further, punches can be produced with Stubby Punch Design at no additional charge. A Stubby Punch has it’s tip (diameter or width) first ground to a size of .187 then a tip is ground to requested size for a length of .225+ thickness to be punched. (If fitted strippers are used, + .125 to tip grind length and use strippers .187 or > in diameter or width.)
Add 50% to die price for Solid Dies.
DIA. ORWIDTH.156
.09.09 land,
then 1.5° relief
Optional STUBBY PUNCH
.187 Dia. or Width
STANDARD KEYING 10 Standard Shapes plus Rounds. (RT Rectangles • SQ=Square • OB=Obround • SD=Single-D • DD=Double-D
LD=Long-D • EQ=Equalateral • OC=Octagon • HX=Hexagon • QD-Quad-D • Add $10 per set to standard price for LD & EQ
LOOKING AT FACE OF LOOKING AT TOP OF
PUNCH DIE Sta.
A & B ½ •1¼
Sta. C 2”
Sta. D 3½”
Sta. E 4½”
Series 80
Sta.C-E 2”-4½”
SPECIAL SHAPES
SHIPPED IN 1-5 days Expediting: 3 days 10%, 2 days 30%, 1 day 50%
Shapes on Angles or Extra Key Locations. Die View
Visualize location key positioned as tool would load into turret. Start with length of shape horizontal.(Length points to 0º) Next Rotate shape, not location key. A sketch accompanying your order ensures keying as required! Note: Other Manufactures ordering diagrams may differ from C.E.’s!
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
Ex. AT Sta.Keyed 20
Ex. AT Sta.Keyed 20
Ex. AT Sta.Keyed 20
Ex. AT Sta.Keyed 20
Ex. 28XX/36tKeyed 20
Ex. 28XX/36tKeyed 20
Ex. 28XX/36tKeyed 20
Ex. 28XX/36tKeyed 20Ex.114/112/C
Keyed 20Ex.114/112/CKeyed 20
Ex.114/112/CKeyed 20
Ex.114/112/CKeyed 20
10 STANDARD SHAPES Ships in 1 - 4 work days.
RECTANGLE • SQUARE • OBROUND • SINGLE-D DOUBLE-D • QUAD-D • HEXAGON • OCTAGON + $10 PER SET FOR: LONG-D & EQUILATERAL
Expediting FDS=Firm Delivery Service • Order by 1pm,
Tool Styles: AT, AS, ST: 1 day FDS=25% 2 day FDS=10%
Tool Styles 36tc, 28st, 92/93 1 day FDS=50% 2 day FDS=25%
Mar-11 Section-3 Page 5
COLE ENGINEERED
AMADA Part# Standard Sta. D Sta. E Part# ABS Sta. D Sta. E PUNCH HSS steel AT_Pm-s-s AT_Pv-s STRIPPER PLATE AT_S-bp-sh AT_Sabs-sh DIE w/SLUG TRAP™ S/F AT_D-sh-S Die w/SLUG HUGGER™ S/O AT_Dsh-st- GUIDE ASSEMBLY *aAT_GAsh *aAT_GAsh PUNCH HEAD AT_PH SPRING DISC (7) ATDE-SD PUNCH DRIVER AT_PD Draw Bolt 12x70 ABS=14x70 ATDE-DB- GUIDE Keyed 0,90º *a AT_G-sh KEY (W/M5X8 FH) AT-DE-K Stripper Plate Bolt ATCDE-SB
Sta. D 3½”
WORK CLAMPS *= PUNCH
*
*
*
*
*
*
Sta. E
Size Range Width .125 (3,mm) - .500 (12.7mm) Length 1.968” (50,mm) -4.400(110,8mm)
BODY COST Station Catalog Code Price
D, 3-1/2_ *A-ATD-IH_ $235 E, 4-1/2_ *A-ATE-IH_ $255
_=m-M12 or i-1/2” Thread Z-Tool ABS
D, 3-1/2v *A-ATD-IHv $315 E, 4-1/2v *A-ATE-IHv $335
Compatible with CE & WT Original Blade Holders
BLADE 8# WT # PRICE Price 3+
1.968 - 3.400 50 -86,mm ATD-IB-RT 1967 128.40
3.401-4.400” 86,-110,mm ATE-IB-RT 1970 161.60
Spare Bolts w/lock washer
ATE-IH-BW
SHCS 3/8-16 X 1 1/2” Long 2.70
Insert BLADES For use in Full Body Holders E or M Series STEEL: High Speed M4-Powderd Metal TiCN coating +$60
Insert Blades 1.81” tall, 5/16 Bolt 2.75” spaced
WT DURA STYLE
Mate Ultra® Style Slitting Components Punch, Die Inserts, and Strippers
Description CE Part # Mate # $-Price 2” C Station Punch Blade 1.875diag.Max. *A-ATCPM42i PAAP_AA
Die Plate *A-ATCDAM62I D0KP_0 Ultra Stripper *A-ATCSAMU92 S6UCOP 3-1/2” D Sta. Punch Blade *A-ATDPM43i PAAQ_0
Die Plate *A-ATDDAM63i D0KQ_0 Ultra Stripper *A-ATDSAMU93 S6UDOP 4-1/2” E Sta. Punch Blade *A-ATEPM44i PAAR_A
Die Plate *A-ATEDAM64i D0KR_0 Ultra Stripper *A-ATESAMU94 S6UEOP
Insert Blades (mm) 18 wide X 45,5 tall, 5mm Bolt 44 & 54
AMADA STYLE
Insert Blades ____” tall, ___ Bolt ____” spaced M2
Compatible with CE & WT Original Blade Holders Station Size Length Part# PRICE 1+ Price 3+
C 1.0 –1.967 ATCIBdb-rt D 1.968 - 3.400 ATDIBdb-rt E 3.401-4.400” ATEIBdb-rt
C-E Spare Bolt *AATdbSHCS
Holder adjustment similar to older WT 80+ style
Section-3 Page 6 Mar-11
COLE ENGINEERED
Fully Guided Punch Insert
Supports Punch at Tip for small diameters & Contour Nibbling
1/2 Station A Range .031-.122”/,8-3,1mm
Description Part # Ketec Round
Punch Assembly ATAPA41130 41130
14 DIE ATAD* 21100
9 PUNCH ATAP11130 11130
8 Guide w/Sleeve ATA71127 71127
15 Die Shim 3pc .4, .8, 1.2 *AATADS
DIE w/
CE
CE TOOLING
m
702 736-2958
CE TOOLING
Normal guide line is to not punch material with diameter no less than 1.5X Material thickens. With this SPS Guided Punch you can go down to o 1X. For Aluminum you can go down to .75X Material thickness. For SST we suggest no less than 1.5X .
Mar-11 Section-3 Page 7
COLE ENGINEERED
For Components for Mate’s Ultra® or Original station C-E (2”, 3½” & 4½”) Holders, look to page 10 “Original Full Body style tooling, or P17 if WT style punches are being used.
Note: We do not offer replacement stripper plates for the Ultra® Sta. C-E holders. Ultra, QuickHit™, & Mate, are trade marks of Mate Precision.
ULTRA-Tec™ Style Replacement Tooling
CE does not produce Ultra Tec® Canisters or Guides, only the Punches, Strippers, & Dies used with them.
Although C.E.Tooling manufactures tools to be fully interchangeable with Mate Precision Ultra™ products, there is no affiliation between our companies
Station A & B ½u &1¼u Replacement Components, For use in Ultra Tec® and QuickHit®
UltraTec™ Strippers Sta. A & B Lube Notches can be included in stripper openings at no addional cost. Add “v” to code
For Ultra Tec™ Holder
Size Range .093-.500”/2,3-12,7mm
Description CE Part# *=R-round S-shape round shape
½ Punch M2 ATA-Pu-* ½ Stripper Plate ATA-Su-* ½ Stripper ABS ATA-Su-abs* ½ DIE w/Slug Trap™ ATA-D-st-M* Die Shim 3pc .4, .8, 1.2 *AATADS
For Ultra Tec™ Holder
Size Range 501-1.250”/12,7-31,7mm
Description CE Part# *=R-round S-shape round shape
1¼ Punch M2 ATB-Pu-* 1¼ Stripper Plate ATB-Su* 1¼ Stripper ABS ATB-Su-v-* 1¼ DIE w/Slug Trap™ ATB-Dst-M* Die Shim 3pc .4, .8, 1.2 *AATBDS
Also Used in Euro-mac MTE4
Multi Tool Holders
Section-3 Page 8 Mar-11
COLE ENGINEERED
METRIC (Industry Standard) NCT & ABS Style Max. Material 7 ga. MS
NTC Standard CE Part # *= r-round s-shape Round Shape
PUNCH ASSEMBLY ATA-PAm-*
DIE AT-A-D-* DIE w/Slug Trap™ S/F AT-A-Dst-* Die w/Slug Z Hugger S/O AT-A-Dso-* PUNCH AT-A-Pm-* GUIDE AT-A-G-m*
HEAVY DUTY CE Part # Round Shape
Punch Ass’y ATAPAm-hd* PUNCH ATAPm-hd-* Punch Ass’y ABS ATAPAvhd-* PUNCH ABS ATAPvhd-*
NCT AIR BLOW CE Part # Round Shape
PUNCH ASSEMBLY ATA-PAv-* DIE AT-A-D-* DIE w/Slug Trap™ S/F AT-A-D-st* Die w/Slug Z Hugger S/O AT-A-D-so* Die Shim 3pc .4, .8, 1.2 *AATADS PUNCH M-2 High Speed AT-A-Pv-* GUIDE AT-A-Gv-*
COMPONENT PARTS CE Part # PUNCH HEAD Side Lock AT-A-Hm COIL SPRING AT-A-Sm DISC SPRING (Set of 24) AT-A-DS-m SPRING RETAINER AT-A-SRm
Extended B Dimension to Give More Punch Life After .08”/2,mm Grind Red ATASR2
After .16”/4,mm Grind (Green) O-RING ATAG-Oring-m Die Shim 3pc .4, .8, 1.2 *AATADS
B
1/2 Station A Range .093-.500”/2,36-12,7mm
DISC SPRING Max. 1/4” M.S.
PUNCH HSS (M2) + 1º Back taper to
assist stripping, and reduce gauling
( ) y
Punch Coating Options: TiN (gold) coating. +$1 TiCN (grey/blue), +$
Mar-11 Section-3 Page 9
COLE ENGINEERED
NTC AIR BLOW Part # Round Shape
Punch Assembly ATB-PAv- DIE AT-B-D-* DIE w/Slug Trap™ S/F AT-B-D-st* Die w/Slug Z Hugger S/O AT-B-D-so* PUNCH AT-B-Pv-* GUIDE –Solid AT-B-Gv-* Guide –Open RSP ATBGv-rsp-* Stripper RSP ATB-S-abs-*
Standard Pricing is for Punch Tip Sizes .093 (2,3mm) and Above
Spanner Wrench *A-SPWR
DISC SPRING (20)
PUNCH HSS (M2) 1º Back taper to assist stripping, and reduce
gauling Triple Temper
NTC Standard Part # *= r-round s-
shape Round Shape
PUNCH ASSEMBLY ATA-Pam-* DIE AT-B-D-* DIE w/Slug Trap™ S/F AT-B-Dst-* Die w/Slug Z Hugger S/O ATB-B-Dso-* PUNCH ATB-Pm-* GUIDE –Closed end ATB-Gm-*
METRIC (Industry Standard) NCT & ABS Style 1¼ Station B Range .501-1.250”/12.7-31.7mm
HEAVY DUTY CE Part # Round Shape
Punch Ass’y ATBPAm-hd* PUNCH ATBPm-hd-* Punch Ass’y ABS ATBPAvhd-* PUNCH ABS ATBPvhd-*
DISC SPRING Max. 3/8” M.S.
COMPONENT PARTS CE Part # $ Price PUNCH HEAD • Solid AT-B-Hm PUNCH HEAD • Side Lock AT-B-Hm-SL COIL SPRING AT-B-Sm DISC SPRING Set (20) AT-B-DS-m SPRING RETAINER AT-B-SRm Extended B Dimension to Give More Punch Life
After .08”/2,mm Grind Red ATBSR2 After .16”/4,mm Grind Green ATBSR4
O-RING ATBG-Oring-m Die Shim 3pc .4, .8, 1.2 *AATBDS
CE TOOLING
sale
s@C
Etoo
ling.
com
CE TOOLING
sale
s@C
Etoo
ling.
com
( ) y
Punch Coating Options: TiN (gold) coating. +$ TiCN (grey/blue), +$
Section-3 Page 10 Mar-11
COLE ENGINEERED
CE TOOLING
sale
s@C
Etoo
ling.
com
70
2 73
6-29
58
METRIC Z-Tooling Std & ABS style Max. Material 7 ga. MS
Z-Tooling Standard CE Part # *= r-round s-shape Round Shape
PUNCH Assembly closed ATA-Pam-ky-* PUNCH ASSEMBLY -open AT-A-PAm-Oky* DIE AT-A-D-* DIE w/Slug Trap™ S/F AT-A-Dst-* Die w/Slug Z Hugger S/O AT-A-Dso-* PUNCH AT-A-Pm-* GUIDE –Closed AT-A-Gm* Guide –Opened RSP AT-A-GmO-* Guide RSP Stripper Plate ATA-Sw
1/2 Station A Range .093-.500”/2,36-12,7mm
COMPONENT PARTS CE Part # Price
Spring Pack ATASP-KY Die Shim 3pc .4, .8, 1.2 *AATADS
Z-Tooling ABS CE Part # Round Shape
Punch Assembly –closed ATA-PAv-ky-* Punch Assembly –open ATA-PAv-kyO-* DIE AT-A-D-* DIE w/Slug Trap™ S/F AT-A-D-st* Die w/Slug Z Hugger S/O AT-A-D-so* PUNCH AT-A-Pv-* GUIDE –Closed AT-A-Gv-w-* Guide –Opened RSP AT-A-Gky-wO-* Guide RSP Stripper Plate AT-A-Sw_*
Compatible to Amada Z-Tooling Spring Pack
( ) y
Punch Coating Options: TiN (gold) coating. + TiCN (grey/blue), +
Mar-11 Section-3 Page 11
COLE ENGINEERED
CE TOOLING
sale
s@C
Etoo
ling.
com
70
2 73
6-29
58
Z-Tooling Standard CE Part # *= r-round s-shape Round Shape
PUNCH ASSEMBLY closed AT-B-Pam-ky-* PUNCH ASSEMBLY -open AT-B-PAm-Oky* DIE AT-B-D-* DIE w/Slug Trap™ S/F AT-B-Dst-* Die w/Slug Z Hugger S/O ATB-B-Dso-* PUNCH AT-B-Pm-* GUIDE –Closed ATB-Gm-ky-* Guide –Open RSP ATBGmrsp* Stripper Plate RSP ATB-S-*
METRIC Z-Tooling Std & ABS style 1¼ Station B Range .501-1.250”/12.7-31.7mm
COMPONENT PARTS CE Part # Price Spring Pack ATBSP-KY Die Shim 3pc .4, .8, 1.2 *AATBDS
Max. Material 1/4 MS
Z-Tooling ABS CE. Part # Round Shape
PUNCH ASSEMBLY -closed ATB-PAv-ky* PUNCH ASSEMBLY –open ATB-PAvo-ky* DIE AT-B-D-* DIE w/Slug Trap™ S/F AT-B-D-st* Die w/Slug Z Hugger S/O AT-B-D-so* PUNCH AT-B-Pv-* GUIDE –Solid AT-B-Gv-* Guide –Open RSP ATB-Gvrsp-* Stripper Plate RSP ATB-S-abs-*
Compatible to Amada Z-Tooling Spring Pack
CE TOOLING
sale
s@C
Etoo
ling.
com
( ) y
Punch Coating Options: TiN (gold) coating. + TiCN (grey/blue), +
Section-3 Page 12 Mar-11
COLE ENGINEERED
NCT AMADA Compatible C.E. Part # Price
LS Guide Assembly *A ATC-GA
PUNCH HEAD ATC-PH
S.H.C.S . (M8X25) 4pc ATCDE-8X25
SPRING DISC (18) ATC-SD
LS PUNCH DRIVER ATC-PD
Draw Bolt = i=1/2”or m= M12 X50 ATC-DB_X50
LS Guide Keyed 0,90 & 45º *A ATC-G
KEY (W/M5X8 FH) AT-C-K
STRIPPER CLIPS W/Screws ATCDE-SC
LS™ Lubrication System Take advantage of machine features that allow lubrication through striker (ABS or ALS), with out having to buy expensive holder stystems, often requiring expensive specialty tools such as Vortec™ or Ultra™. You can also manualy fill reservoir with 80-90-weight oil for built in Self Oiling System. Provides lubrication between the punch, PUNCH HEAD
DISC SPRING (18)
PUNCH DRIVER
STRIPPER CLIPS (4)
Guide Keyed 0, 90 & 45°
Full Body Style 2 Sta. C Range 1.251-2.000” / 31,76—50,8mm METRIC (Industry Standard ) M12 Thread =NCT
DESCRIPTION CE Part # * R-round S-shape ROUND SHAPE
SET Punch, Die & Stripper Punch thread m=metric or i= inch Stripper Styles AM or UL
ATC-PDSm-AM* ATC-PDSm-UL ATC-PDSi-WT*
PUNCH m=metric or i=inch threads
ATC-Pm-* ATC-Pi-*
Punch Shim 3pc .4, .8, 1.2 *AATPPS STRIPPER Available as AM, WT, UL
ATC-S-AM-* ATC-S-WT-* ATC-S-UL-*
Strip Guard Adhesive Discs *A06085
DIE ATC-D-*
DIE w/Slug Trap™ S/F ATC-Dst-*
Die w/Slug Z Hugger S/O ATC-Dso-* Die Shim 3pc .4, .8, 1.2 *AATCDS
STRIPPER STYLES AM Style for CE or Amada WT Style for S90/HP
UL Style for Mate UltraTec
For use in Holders Styles: E&M Series + Amada Z-Tool, Alpha & NCT, Mate® Ultra Tec® & Ultra XT® and WT “Old Style” Standard & WLS
E85 Series (Metric) M12 Thread NCT Style
Mar-11 Section-3 Page 13
COLE ENGINEERED Full Body Style 2 Sta. C Range 1.251-2.000” / 31,76—50,8mm METRIC Z-Tooling Equivalent M12 Thread
Push Button Adjustable Length
Holder Key 0&90 Part#
*AATCGA-HC010 Key 0,90&45 Part#
*AATCGA-HC011
DESCRIPTION Part #
* R-round S-shape ROUND SHAPE
SET Punch, Die & Stripper ATC-PDSm-AM* PUNCH ATC-Pm-* STRIPPER ATC-S-AM-* Strip Guard Adhesive Discs *A06085 DIE ATC-D-*
DIE w/Slug Trap™ S/F ATC-Dst-*
Die w/Slug Z Hugger S/O ATC-Dso-* Die Shim 3pc .4, .8, 1.2 *AATCDS
ch
CE
CE Tooling Inc.
CE TOOLING
sale
s@C
Etoo
ling.
com
70
2 73
6-29
58
sale
s@C
Etoo
ling.
com
702
736-
2958
CE TOOLING
M85 Series (Metric) M12 Thread NCT Style
Section-3 Page 14 Mar-11
COLE ENGINEERED
DESCRIPTION C.E. Part # * R-round S-shape Round Shape
SET Punch, Die & Stripper Punch threads m=metric • i= inch Stripper Styles AM, WT, or UL
ATD-PDSm-AM* ATD-PDSm-UL ATD-PDSi-WT*
PUNCH m=metric or i=inch threads
ATD-Pm-* ATD-Pi-*
Punch Shim 3pc .4, .8, 1.2 *AATPPS
STRIPPER Available as AM, WT, UL
ATD-S-AM-* ATD-SWT-* ATD-S-UL-*
DIE ATD-D-*
DIE w/Slug Trap™ S/F ATD-Dst-* Die w/Slug Z Hugger S/O ATD-Dso* Die Shim 3pc .4, .8, 1.2 *AATDDS
NCT AMADA Compatible C.E. Part # Price
LS Guide Assembly *A ATD-GA
Punch Head ATD-PH
S.H.C.S . (M8X25) 4pc ATCDE-8X25
SPRING DISC (7) ATDE-SD
Punch Driver ATD-PD
DRAW BOLT i=1/2”orm= M12 X70 ATDE-DB_X70
LS Guide Keyed 0,90 &45º *A ATD-G
Key (W/M5X8 FH) AT-DE-K
STRIPPER CLIPS W/SCREWS ATCDE-SC
PUNCH HEAD
DISC SPRINg (7) Required
PUNCH
STRIPPER CLIPS
PUNCH DRIVER
Full Body Style 3½ Sta. D Range 2.001 - 43500”/50.81 - 88,9mm
LS™ Lubrication System Take advantage of machine features that allow lubrication through striker (ABS or ALS), with out having to buy expensive holder stystems, often requiring expensive specialty tools such as Vortec™ or Ultra™. You can also manualy fill reservoir with 80-90-weight oil for built in Self Oiling System. Provides lubrication between the punch, guide & turret.
For use in Holders Styles: E&M Series + Amada Z-Tool, Alpha & NCT, Mate® Ultra Tec® & Ultra XT® and WT “Old Style” Standard & WLS
STRIPPER STYLES AM Style for CE or Amada WT Style for S90/HP
UL Style for Mate UltraTec
METRIC (Industry Standard ) M12 Thread =NCT
E85 Series (Metric) M12 Thread NCT Style
Mar-11 Section-3 Page 15
COLE ENGINEERED Full Body Style 3½ Sta. D Range 2.001 - 43500”/50.81 - 88,9mm
Push Button Adjustable Length
Holder Key: 0&90 Part#
*AATDGA-HD010 Key: 0,90 & 45 Part#
*AATDGA-HD011
# DESCRIPTION CE Part # * R-round S-shape Round Shape
SET Punch, Die & Stripper ATD-PDSm-_-AM
20 PUNCH ATD-Pm-*
22 STRIPPER ATD-S-AM-*
23 DIE ATD-D-* 23 DIE w/Slug Trap™ S/F ATD-Dst-* 23 Die w/Slug Z Hugger S/O ATD-Dso*
Die Shim 3pc .4, .8, 1.2 *AATDDS
$1.40$2.80
$1.40 each
sa
les@
CEt
oolin
g.co
m
702
736-
2958
CE TOOLING
CE TO
CE Tooling
CE TOOLING
sale
s@C
Etoo
ling.
com
METRIC Z-Tooling Equivalent M12 Thread M85 Series (Metric) M12 Thread NCT Style
Section-3 Page 16 Mar-11
COLE ENGINEERED
PUNCH HEAD
DISC SPRING (7)
PUNCH DRIVER
STRIPPER CLIPS
GUIDE
NCT AMADA Compatible CE Part # Price LS™GUIDE ASSEMBLY *A ATE-GA PUNCH HEAD ATE-PH S.H.C.S. (M8X20) ATCDE-8X20 SPRING DISC (7) ATDE-SD PUNCH DRIVER ATE-PD DRAW BOLT i=1/2”orm= M12 X70 ATDE-DB-_X70 GUIDE Keyed 0,90º *A ATE-G KEY (W/M5X8 S.H.C.S.) AT-DE-K STRIPPER CLIPS W/SCREWS AT-CDE-SC
Full Body Style 4½ Sta. E Range 3.501 - 4.500”/88.92 - 114.3mm
LS™ Lubrication System Provides lubrication between the punch, guide & turret.
DESCRIPTION C.E. Part # * R-round S-shape ROUN
D SHAPE
SET Punch, Die & Stripper punch thread m=metric or i= inch Stripper Styles AM or UL
ATE-PDSm-AM* ATE-PDSm-UL ATE-PDSi-WT*
PUNCH m=metric or i=inch threads
ATE-Pm-* ATE-Pi-*
STRIPPER—Available as AM, WT, UL
ATE-S-AM-* ATE-S-WT-* ATE-S-UL-*
DIE ATE-D-*
DIE w/Slug Trap™ S/F ATE-D-st-*
Die w/Slug Z Hugger S/O ATE-D-so-*
Die Shim 3pc .8, *AATEDS STRIPPER STYLES
AM Style for CE or Amada WT Style for S90/HP
UL Style for Mate UltraTec
DESCRIPTION CE PART # ROUND SHAPE PUNCH ATF-P-m-* STRIPPER ATF-S-am- DIE ATF-D-*
Amada 6” Sta. F SIZE RANGE 4.501-6.000”/114.3-152.4mm
For use in Holders Styles: E&M Series + Amada Z-Tool, Alpha & NCT, Mate® Ultra Tec® & Ultra XT® and WT “Old Style” Standard & WLS
METRIC (Industry Standard ) M12 Thread =NCT
E85 Series (Metric) M12 Thread NCT Style
Mar-11 Section-3 Page 17
COLE ENGINEERED
Sta. C, 2” Range 1.251-1.85” / 31,76 - 47mm
Part# $ Round $ Shape
PUNCH M14 thread AT-C-Pv-* STRIPPER Bolt On AT-C-Sbv-* STRIPPER Z-Style ATC-S-mv-*
DIE AT-C-D-* DIE w/Slug Trap™ S/F AT-C-Dst-* Die w/Slug Z Hugger S/O ATC-Dso-*
ABS-Series (Metric) M14 Thread Z-Tool Style For machines equipped with ABS/Air Blow System)
Sta. A Maximum material 3/8” Mild Steel Rounds<1.251” +$10 to punch, Shapes Diagonal <1.251 + +$15 Shaped Punches Keyed 0 for location at 0 & 90º Additional Keys add $50 Shaped Dies Keyed 0 & 90º Squares 0 & 45º Additional Die Keys + $25 Shapes on angles + $25 each to Punch, Die & Stripper
Stripper Plate Bolt On
For use in Holders Styles: Amada Z-Tool & Alpha
Sta. D, Range 1.851-3.370” / 47,01-85,6mm CE Part # Round Shape
SHAPE
PUNCH M2 M14 thread AT-D-Pv-*
STRIPPER Bolt On AT-D-Sbv-*
STRIPPER Z-Style ATD-S-mv-* ATC-Swt-*
DIE AT-D-D-* DIE w/Slug Trap™ S/F AT-D-Dst-* Die w/Slug Z Hugger S/O ATD-Dso*
Sta. D Maximum material 3/8” Mild Steel Rounds<2.001” +$10 to punch, Shapes Diagonal <2.001 + +$25 Shaped Punches Keyed 0 for location at 0 & 90º Additional Keys add $50 Shaped Dies Keyed 0 & 90º Squares 0 & 45º Additional Die Keys + $25 Shapes on angles + $25 each to Punch, Die & Stripper
Stripper Plate Bolt On Style
Sta. E Maximum material 3/8” Mild Steel Rounds<2.001” +$10 to punch, Shapes Diagonal <2.001 + $25 Shaped Punches Keyed 0 for location at 0 & 90º Additional Keys add $50. Shaped Dies Keyed 0 & 90º Squares 0 & 45º Additional Die Keys + $25 Shapes on angles + $25 each to Punch, Die & Stripper
Sta. E Range 2.851-4.370” / 85,61-110,5mm CE Part# Round Shape
SHAPE
PUNCH M2 M14 thread AT-E-Pv-*
STRIPPER Bolt On AT-E-Sbv-*
STRIPPER Z-Style ATE-S-mv-* ATC-Swt-*
DIE AT-E-D-* DIE w/Slug Trap™ S/F AT-E-Dst-*
Die w/Slug Z Hugger S/O ATE-D-so-*
Section-3 Page 18 Mar-11
COLE ENGINEERED
Standard Pricing is for Punch Tip Sizes .093 (2,3mm) and Above
WT COMPATIBLE DESCRIPTION
Part # *= R-round S-shape
PRICE ROUND
PRICE SHAPE
PUNCH ASSEMBLY ATA-PAi-*
DIE ATA-D-* DIE w/Slug Trap™ S/F ATA-Dst-* Die w/Slug Z Hugger S/O AT-A-Dso-* PUNCH (includes Retain Clip) ATA-Pi-* GUIDE Fitted ATA-Gi*
WT COMPATIBLE Part # Round Shape PUNCH ASSEMBLY ATAPAi-hd* DIE ATAD-* DIE w/Slug Trap™ S/F ATADst-* Die w/Slug Z Hugger S/O AT-A-Dso-* PUNCH (MD Heavy Duty) ATAPi-hd-* GUIDE Fitted ATA-Gi-*
Max. material 1/4”/6,mm mild steel 1º total back taper on punch tips to reduce gauling build up and stripping pressure.
COMPONENT PARTS Part# Price 1 PUNCH HEAD ATA-Hi 2 Set Screw Long Coin Point *A6297 4 SPRING DISC Set (__) AT-A-DS-i
5 SPRING SUPPORT /Retainer AT-A-SRi
6 O-Ring for Spring Support ATAG-Oring 7 Punch Retainer Clips 4pc *A-ATAPC Punch Shims pack of 25pc Strip Guard Adhesive Disc *A06082 Die Shim 3pc .4, .8, 1.2 *AATADS
COMPONENT PARTS CEPart # Price 1 PUNCH HEAD ATA-Hi 2 Set Screw Long Coin Point *A6297 4 SPRING COIL AT-A-Si 5 SPRING SUPPORT /Retainer AT-A-SRi 6 O-Ring for Spring Support ATAG-Oring 7 Punch Retainer Clips 4pc *A-ATAPC Punch Shims pack of 25 pcs Strip Guard Adhesive Disc *A06082 Die Shim 3pc .4, .8, 1.2 *AATADS
1/2 Station A Range .093-.500”/2,36-12,7mm
( ) g
Heavy Duty Series SPH80 (Inch)
Max. Material 7 ga. MS
INCH S80 Series Original Series 80
Punch Coating Options: TiN (gold) coating. +$12 TiCN (grey/blue), +$20
Mar-11 Section-3 Page 19
COLE ENGINEERED
CE TOOLING
sale
s@C
Etoo
ling.
com
( ) g
1-1/4 Station B Range .501-1.250”/12.7-31.7mm Standard Pricing is for Punch Tip Sizes .093 (2.3mm) and Above
WT Inch/S80 COMPATIBLE DESCRIPTION Part#
*= R-round S-shape Round Shape
PUNCH ASSEMBLY ATB-PAi-* DIE ATB-D-* DIE w/Slug Trap™ S/F ATB-Dst-* Die w/Slug Z Hugger S/O ATB-B-Dso-* PUNCH ATBPi-* GUIDE –Open RSP ATBGi-O-* Stripper Plate ATB-Si* GUIDE Solid ATB-Gi*
HEAVY DUTY Part# *= R-round S-shape Round Shape
PUNCH ASS’Y ATBPAi-hd-* DIE AT-B-D-* DIE w/Slug Trap™ S/F ATB-Dst-* Die w/Slug Z-Hugger S/O ATB-B-Dso-* PUNCH HD Heavy Dutyl ATB-Pi-hd-* GUIDE Solid ATBGi-* GUIDE RSP ATBGi-rsp* Stripper Plate ATB-Si*
• Max. material 3/8”/9,mm mild steel up to 3/4” diameter • 1º total back taper on punch tips to reduce gauling build up, and stripping pressure.
OPTIONAL: Side Lock Punch HEAD
COMPONENT PARTS CE Part # $Round Amada $Shape
PUNCH HEAD = WT AT-B-Hi PUNCH HEAD Side Lock AT-B-Hi-sl DISC SPRING Set (20) AT-B-DS-i SPRING RETAINER AT-B-SRi O-RING ATAG-Oring-m Strip Guard Adhesive Disc *A06084 Die Shim 3pc .4, .8, 1.2 *AATBDS
GUIDE: Solid or Removable Stripper plate. Uses retainer ring to secure.
Heavy Duty Series SPH80 (Inch)
COMPONENT PARTS Part # $ PUNCH HEAD = WT AT-B-Hi PUNCH HEAD Side Lock AT-B-Hi-sl COIL SPRING AT-B-Si SPRING RETAINER AT-B-SRi O-RING ATAGOring-m Strip Guard Adhesive Disc *A06084 Die Shim 3pc .4, .8, 1.2 *AATBDS
CE TOOLING
m
INCH S80 Series Original Series 80
Punch Coating Options: TiN (gold) coating. +$18 TiCN (grey/blue), +$35
Section-3 Page 22 Mar-11
COLE ENGINEERED
DESCRIPTION Part# Round Shape
SET Punch, Die & Stripper (Standard Stripper & Die) ATC-PDSwt-*
PUNCH ATC-Pwt-* STRIPPER Standard ATC-S-wt-* STRIPPER “ABS” ATC-S-wt-abs-* DIE ATC-D-* DIE w/Slug Trap™ S/F ATC-D-st-* Die w/Slug Z Hugger S/O ATC-D-so-* Die Shim 3pc .4, .8, 1.2 *AATCDS
STRIP GUARD Urethane Adhesive Discs Prevent Marking of Material See Page 5
Punch Coating Options: TiN (gold) coating. TiCN (grey/blue), and Alpha (blue)
Push Button Adjustable Length Holder Key: 0&90 Part# *AATCGA-HD020
Key: 0,90&45 Part# *AATCGA-HD020
2 Sta. C Range 1.251-2.0”/31,76-50,8mm
y
Item 18 $1.40 each Item 19 $2.80 each
r
CE
CE Tooling Inc.
CE TOOLING
sale
s@C
Etoo
ling.
com
70
2 73
6-29
58
sale
s@C
Etoo
ling.
com
702
736-
2958
CE TOOLING
S90 Series 90/HP Style
Mar-11 Section-3 Page 23
COLE ENGINEERED 3-1/2 Sta. D Range 2.001 - 4.500”/50.81 - 88,9mm
y
DESCRIPTION Part# ROUND SHAPE
SET Punch, Die & Stripper ATD-PDSwt-* PUNCH ATD-Pwt-* STRIPPER Standard ATD-S-wt-* STRIPPER “ABS” ATD-S-wt-abs DIE ATD-D-* DIE w/Slug Trap™ S/F ATD-D-st-* Die w/Slug Z Hugger S/O ATD-Dso* Die Shim 3pc .4, .8, 1.2 *AATDDS
Push Button Adjustable Length Holder
Key: 0&90 # *A-ATDGA-HD020 Key: 0,90&45 *A-ATDGA-HD021
$1.40 each $2.80
CE TOO
CE Tooling Inc.
CE TOOLING
sale
s@C
Etoo
ling.
com
70
2 73
6-29
58
sa
les@
CEt
oolin
g.co
m
702
736-
2958
CE TOOLING
S90 Series 90/HP Style
Section-3 Page 24 Mar-11
COLE ENGINEERED
4-1/2 Sta. E Range 3.501 - 4.500”/88.92 - 114.3mm
y
Adjustable length holder not yet available. Below is Industry standard holder with adapter for WT
Adapters enable use of S80/90/HP Style Punches in Industry Standard Full
Body Punch Holders. *AATEGAWT Adapter Only: *A-ATEADWT
STRIPPER STYLES AM Style for use in CE, or
Amada mfg. Guides WT Style for use with S90/
HP style of guides UL Style for use with Mate
Description Part # $
LS™Guide Assembly *A ATE-GAwt
PUNCH HEAD ATE-PH
S.H.C.S. (M8X20) ATCDE-8X20
SPRING DISC (7) ATDE-SD
PUNCH DRIVER ATE-PD DRAW BOLT i=1/2”-13X_0 ATDE-DB-iX__
GUIDE Keyed 0,90º *A ATE-G KEY (W/M5X8 S.H.C.S.) AT-DE-K STRIPPER CLIPS W/SCREWS AT-CDE-SC WT Punch Adapter *A-ATEADWT
DESCRIPTION CE Part # ROUND SHAPE
SET Punch, Die & Stripper ATE-PDSwt-* PUNCH ATE-Pwt-* STRIPPER Standard ATE-S-wt-* STRIPPER “ABS” ATE-S-wt-abs DIE ATE-D-* DIE w/Slug Trap™ S/F ATE-D-st-* Die w/Slug Z Hugger S/O ATE-D-so-* Die Shim 3pc .8, *AATEDS
S90 Series 90/HP Style
Mar-11 Section-3 Page 25
COLE ENGINEERED
.6299 16.0mm
3.93
7”
100m
m
1/8
Dow
el
.812HX.246 .3dX.025 Hit Pointt
63”
MTQ-8 .030-0.630” 8-16.0mm PUNCH or DIE Grind Life: .060”/1,5mm
.29”
1.052”diameter .125 thick
1.000” 25.4mm
LVD
MT
& S
tripp
t Thi
ck
.70”
=17.
8mm
3/16 dowel .34 up
STATION Shape Punch Part#
PRICE M2 Steel
Die Part#
PRICE A2 Steel
Stripper Part#
PRICE
SET Part#
PRICE
N 8 Sta.
Round MTNP-r MTND-r MTNS-r MTNPDS-r
Shape MTNP-s MTND-s MTNS-s MTNPDS-s
NISSHINBO MULTI-TOOL (MT) Pricing is for Punch Tip Sizes .093(2,3mm) & Above
8 Stations for Sta. D auto index
CE style N Range .030-0.630” 8-16.0mm PUNCH Grind Life: .060”/1,5mm Minimum length = DIE Grind Life: .06”/1,5MM Minimum length =
Slug Trap™ Die
.290” • 1.052Ø
1.000” 25.4mm
.7
17,8
mm
Shapes, 3/16 dowel X .10 extention
1.052”diameter 125 thick flange
. ” mm
”
mm
1/8 Dowel
. ”
Strippit/LVD Multi-Tool (MT) Pricing is for Punch Tip Sizes .093(2,3mm) & Above
STATION Punch Part#
PRICE M2 Steel
Die Part#
PRICE A2 Steel
Stripper Part#
PRICE
SET Part#
PRICE
Q 8 Sta.
Round MTQP-r MTQD-r MTQS-r MTQPDS-r
Shape MTQP-s MTQD-s MTQS-s MTQPDS-s
Round MTRPh-r MTRD-r MTRS-r MTRPhDS-r Shape MTRP-s MTRD-s MTRS-s MTRPhDS-s
R 3 Sta.
MTR-3 -01.250” -31.75mm PUNCH or DIE Grind Life: .060”/1,5mm
..594
” Tal
l=S
TMT3
D*
Punch= ATBPwL* Head= MTRH
.594
” 1.875 47.6m...
3/16 Dowel
MTRS=ATBS
Section-3 Page 26 Mar-11
COLE ENGINEERED C.E. TOOLING, INC.
EUROMAC, FINN-POWER Multi-Tool
STYLE
Shape Punch M2 Steel
CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
Die A2 Steel
Slug Trap™ CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
Stripper
CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
X MT8 12, 20, 24 MTE10
Round MTXP-r 18.95 MTXD-r 18.90 MTXS-r 19.00
Shape MTXP-s 37.95 MTXD-s 36.50 MTXS-s 39.50
Y MT16 6 & 10
Sta.
Round MTYP-r 23.55 MTYD-r 23.00 MTYS-r 29.00
Shape MTYP-s 39.00 MTYD-s 51.40 MTYS-s 55.00
Z MT24 6 & 8
MTE6
Round MTZP-r 28.60 MTZD-r 28.50 MTZS-r 29.00
Shape MTZP-s 53.30 MTZD-s 53.20 MTZS-s 60.40
*AMSFZ 50.00 Pack of 32pc Die Shim
12, 20, 24 Station style X =MTE10 Range .030-.315” ,8-8.0mm PUNCH Grind Life: .060”/1,5mm Minimum length 2.716/69mm
DIE Grind Life: .06”/1,5MM inimum
6,8 &10 Station style Z =MTE6 & 10
Range .030-.945” ,8-24.mm PUNCH Grind Life: .060”/1,5mm Minimum length 2.716/69mm
DIE Grind Life: .06”/1,5MM Minimum length=.885/22,5mm
6 & 10 Station CE style Y
Range .030-0.630” 8-16.0mm PUNCH Grind Life: .060”/1,5mm Minimum length 2.716/69mm
DIE Grind Life: .06”/1,5MM Minimum length=.885/22,5mm
Shaped Dies and Strippers have four (4) pin holes for keying 0, 90, 45 & 180 For shapes on other angles $15 to Die and $15 to Stripper Goto Page 2 for ordering diagram for tools on Angles Sorry, Extra pins on Die or Stripper other than listed above are not available.
2.77
6”
70.,5
mm
.315”
8,0
.6299” 16,mm
2X10 dowel
.669
” 17
,mm
2X8 dowel .236”/6,mm
.6299”
16,0
2.77
6”
70.,5
mm
.945”
24,0
2.77
6”
70.,5
mm
.9843” 25,mm
4X8 dowel
.945
” 24
,mm
.315”/8,mm 4X8 dowel
1.2206” 31,mm
4X8 dowel
.945
” 24
,mm
4X6 dowel .413”/10,5mm
CE TOOLING, INC. Go to page 7 for Euromac MTE4
Mar-11 Section-3 Page 27
COLE ENGINEERED
CE TOOLING, INC. EUROMAC MULTI-TOOL (MT)
STYLE
Shape Punch M2 Steel
CATALOG CODE
PRICE Dia. or Width >.093 2,3mm
Die A2 Steel
Slug Trap™ CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
Stripper
CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
XMT 12.7
Round MTFP-r MTFD-r MTFS-r
Shape MTFP-s MTFD-s MTFS-s
XMT24 E6-Long
Round MTEP-r MTED-r MTES-r
Shape MTEP-s MTED-s MTES-s
Pack of 32pc Die Shim *AMSFZ
XMTE6 (Long)
Shaped Dies and Strippers (MTZ only) have pin holes for pinning of 0 & 90 (Squares 0 &45) For shapes on other angles add $15 to Die and $15 to Stripper
Go to Page 2 for ordering diagram for tools on Angles Extra pins on Die or Stripper other than listed above are not available.
.413/5mm
1.2206” 31,mm
4X10 dowel pin f15” 8,0mm
.945
” 24
mm
.945” 24mm
3.93
7”
100 m
m
+/-.002
+/-.0
02
XMT E6-Long Dies= MT-Z Stripper = MT-Z with no dowel pin
./mm
” mm
4X10 dowel pin f15”
.945
”
.500”
”
+/-
+/-.0
02
XMT12.7 XMT24 Range 12mm/.500” 24mm/.945”
XMT™ 6 & 10 Station XMET-6&10 Long PUNCH Grind Life: .059”/1.5mm • Minimum length MTZ=2.716”/69mm XMT = 3.82”/97mm
Section-3 Page 28 Mar-11
COLE ENGINEERED
C.E. TOOLING, INC. Multi-MATRIX 6/24 & 10/18
6 Station Holder for use in Thick Turret 3½” Sta. D Compatible to Amada, IMAC, and similar presses
MTU 6/24 Range -.945”/ 24.mm MTV 10/18 Range -.708/ 18.mm PUNCH Grind Life: .12”/3,0mm Minimum length MTU or MTV=2.716/110,5mm VMT=3.82”/97mm DIE Grind Life: .06”/1,5MM Minimum length=.885/22,5mm
Shaped Dies only req. 1 pin Holder is keyed for 0 90 & 45 Go to Page 2 for ordering diagram for tools on Angles Extra pins on Die or Stripper other than listed above are not available.
+/-.002
.945
” 24
,mm
+/
-.002
1.2206” 31,mm
4X10 dowel
.945” 24,0mm
4.47
” 11
3.5 m
Head 26 X 5
STYLE Shape Punch M2 Steel
CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
Die A2 Steel
Slug Trap™ CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
Stripper
CATALOG CODE
PRICE Dia. or Width
>.093 2,3mm
MTU Dies= MT-Z
Round MTUP-r MTZD-r 39.10 MTUS-r
Shape MTUP-s MTZD-s 60.80 MTUS-s
MTV Round MTVP-r MTVD-r MTVS-r
Shape MTVP-s MTVD-s MTVS-s
MTU MTV
Round Stripper
Shaped Stripper
Mar-11 Section-3 Page 29
COLE ENGINEERED
Standard ABS Style
TM
C.E.TOOLINGTOOLS
PUNCHRAISES CLOCKWISE
CLOCKWISELOWERS PUNCH
COUNTERTWIST
Quick-Set™
/THOR accuJust
No Shimming • Fast Lift and Turn Spring Pack for .004/,1mm increments of adjustment
Uses Metric Style Punches
Quick-Set / THOR accuJust Price Holder System Guide K0 ATAQHmr Holder System Guide Key 0&45 or 0&90 ATAQHms For ABS Holder round+$15 shaped+$40 For
punch & Dies see above Charts
Stripper Plate Round ATA-Sq-r Stripper Plate Shaped ATA-Sq-s Stripper Plate ABS Round ATA-Sv-r Stripper Plate ABS Shaped ATA-Sv-s Spring Pack Can Ass’y *AATACANmd
Uses standard Metric Punches & die Find price for Punch & Die on Page 10
Standard ABS- Style
TM
C.E.TOOLINGTOOLS
PUNCHRAISES CLOCKWISE
CLOCKWISELOWERS PUNCH
COUNTERTWIST
Warning Sta. B Holders Not For Use on Machines with Strikers >1.85”Ø or if striker doesn’t come down centered on punch head. Example: Some LVD & EUROMACH presses.
No Shimming • Fast Lift and Turn Spring Pack for .004/,1mm increments of adjustment
Uses Metric Style Punches
THOR accuJust
Price Holder System Guide K0 ATBQHmr Holder System Guide Key 0&45 or 0&90 ATBQHms
For ABS Holder round+$15 shaped+$40 punch, stripper & dies see above Charts
Spring Pack Can Ass’y *AATACANmd
Quick-Set / THOR accuJust
Uses standard Metric Punch Stripper & Die Find price for Punch & Die on Page 11
1/2 Station A Range .093-.500”/2,36-12,7mm
METRIC CANISTER -Open Guide Style Amada older Vortec Style
1-1/4 Station B Range .501-1.250”/12.7-31.7mm
Section-3 Page 30 Mar-11
COLE ENGINEERED
EXCLUSIVELY From C.E. TOOLING The QUICK-SET™ This patented tool length adjustment unit allows for set up of form
tools length to as close as .0025” with only a lift and turn of
the outer knurled collar.
Length can’t change during use. A half to one hour set up time
is now reduced to minutes.
SPECIAL APPLICATION FORMING TOOLS HIGHER PRODUCTIVITY THROUGH SUPERIOR ENGINEERING
EMBOSSES ROUND OR SHAPED
Form Down Sp74 Form Up Sp63
D < 45º DIE w/Built in Stripper Quick-Set™ Punch and Die Cat. Code *FAT_PD-D72
D >= 45º DIE w/No Stripper Quick-Set™ Punch and Die Cat. Code *FAT_PD-D72
AB
CD
D < 45º DIE w/Built in Stripper Quick-Set™ Punch and Die Cat.
Code *FAT_PD-U63
D>= 45º DIE w/No Stripper Quick-Set™ Punch and Die Cat.
Code *FAT_PD-U63
A
B
C
D
EXTRUSION
BRIDGE TOOL SINGLE Sp-65 DOUBLE Sp-66
A
B
C
D
E
EF G
SP-65 SP-66
ELECTRICAL KNOCK OUTS SINGLE Sp-60 DOUBLE Sp-61
ABC
A BC
D
Pipe Actual Size Pipe Actual
Size 1/2 .875 1½ 2.000 3/4 1.125 2” 2.500 1” 1.375 2½ 3.000 1¼ 1.750 3” 3.625
THREAD FORM DOWN ONLY
C
Replaceable Top *FIP81 Bottom *FID81 Ordering Notes: Order by Screw & Thread size
Limitations Thread Pitch must be < than material thickness. Contact C.E. Tooling Engineers with your specific needs, and they can discuss the feasibility and pricing for Thread Form Tooling
GROUND SYMBOL Keyed 4 Ways DOWN Sta. A =$235 Sta. B= $275 UP Sta. A= N/A Sta. B=$350 DOWN Sta. A=$250 Sta. B=$290 UP Sta. A = N/A Sta. B=$365
Standard=1/2ӯ Longest horizontal line=3/8 length +$50 for non standard +$75 for Quick-Set Adj.Head
Mar-11 Section-3 Page 31
COLE ENGINEERED
LOUVER & CARD GUIDE TOOLS
C
B
D
E
AA
BCD
(11 GAGE MAX.)
(11 GAGE MAX.)
DIE ASS'Y FOR LOUVER'S DIE ASS'Y FOR CARD GUIDE
POCKET INSERT
FORMINGINSERT
CUTTING
INSERT
INSERT
FORMING INSERT
TO ADJUST, LIFT & TURN
STANDARD & PROGRESSIVE styles of LOUVERS & CARD-GUIDES. Progressive tools are made to exact material thickness. The length is unlimited through nibbling. Reference Section 1 for further information
Standard LOUVER Sizes
Form Down LOUVER STD. PUNCH INSERT FOR
MASTER HOLDER
“A” Length “B” “C” “D”
2” 2-1/2” 1/2” 3/16” 3/4”
3” 3-1/2” 5/8” 1/4” 15/16
4” 4-1/2” 3/4” 1/4” 1-1/8”
PROGRESSIVE STIFFENING RIB
A
B
R
Unlimited Length Width Nibbles
Other sizes available
Standard “A” “B” “R” Size 3/8 3/16 3/16
Punch is made for a specific material thickness
Sheet Lifter Dies
Lifter dies are placed in your turret on each side of a special forming tool. When the sheet passes through this section of the turret, these lifter dies will lift the sheet up to the height of the form die, preventing the sheet from colliding with the forming die which at times causes the sheet to break the grip of the work holder clamps.
1/2” Sta-A ATAD-Lifter $55.00 1-1/4” Sta.B ATBD-Lifter $55.00
LANCE & FORMS
FORM OF 90 DOUBLE BEND
E=WIDTH
C C
D AB=.250 MAX.
SP-78 SP-80
C
LESS THAN 90
SP-79
OF TAB
DOUBLE BEND
A
SP-77
C
B
YLE
STYLE
LANCE STYLE
OPEN STYLE
FSTC-PSR
STC-QS-H
FSTC-PB-
OLD SPRING
TO ADJUST, LIFT & TURN
C.E.TOOLINGCOLE ENGINEERED
TOOLS
Section-3 Page 32 Mar-11
COLE ENGINEERED
Adjust the Quick-Set™ to its shortest length by lifting
and rotating of knurled collar clock wise.
MASTER PUNCH
HOLDER Code *FSTCMPH
$196.95
INSERT CHANGING INSTRUCTIONS: While holding die base, pull knurled portion of the insert plate apart from the die base. If replacing with new insert, first check that I.D. hole in the stripper plate, is large enough to allow insert to
go through. Insert the Insert Plate into die assuring alignment of the pin extending out of the
die base to mate with one of two holes in the stripper plate. To keep the die base in good
working order and prolong its life, periodically add grease to the shoulder bolts and the rubber
“O”-ring in the center I.D. hole.
for.
SINGLE FORM TOOL HOLDER Accepts Inserts to perform many common form aplications, $ave!
PUNCH CHIP
INSERT RETAINER Part#*FCPIR
$31.05
Amada Style
C
B
D
WT Style
THOR D2
E A S Y A D J U S T H E A D
Mate UltraTec™
O-RING Code *FMPH $1.65
INSERT PLATE *FIP $20.50 Included with die
DIE BASE Cat. Code *FATBMDB $100
STRIPPER PLATE .28 I.D. Part# *FCDIPD $32.50 53” I.D. Part# *FCDIPV $32.50
There are two different insert styles. All but form up coins use a .28”(7,mm) I.D. hole through the stripper plate. Form up Coins use .53”/25,4mm I.D. hole.
URETHANE P.STRIPPER
Form-Down Yellow Part# *FCPUD $14.95
Form Up Orange Part# *FCPUU $14.95
CE can supply Inserts & Die for use in com-petitor master Form Holders at reduced cost!
TO ADJUST, LIFT & TURN
COLE ENGINEEREDC.E.TOOLING
TOOLS
CE Tooling Quick-Set accept Amada
or WT Inserts Dedicated Style
Mar-11 Section-3 Page 33
COLE ENGINEERED
Form Inserts for CE, WT & Amada Style Holders
EXTRUSIONS INSERTS
A
BMAX..250
A
B.500
MAX.
Down *FIP54 $71.20 Up *FIP50 & *FID50 $78.75
HEIGHTDETERMINE
BY PRE-PUN
CENTER POINT
Replaceable Insert For CE Holder Top FIP58 $71.20
Bottom *FID53 $57.80 For WT Top *FIP58wt Bottom
*FID53wt
Replaceable Insert For CE Holder Top *FIP57 $50.30
For WT *FIP57wt $50.30 For Amada
Use with No hole Die ATB-Dr
AB
.250 MAX.
Replaceable Insert Top *FIP51 $71.20
Bottom *FID51 $84.00
TWO HALF-SHEARS
USED FOR SHEAR STOPS
TWO HALF SHEARS USEDFOR ALIGNING TWO SHEETS
HALF SHEAR FORM DOWN OR FORM UP
Master Unit Accepts Replaceable Half Shear Insert .25”(6,1mm)
Maximum B dimension Dedicated Quick-Set Punch Holder and Die
must be used for Inserts/Chips For CE Holder
Top=*FIP51 $71.20 *FID51 $84.00 For WT Style Holder
P.Chip = CE# *FIP51wt D.Chip = CE *FID51wt
For sizes>.25”(6,1mm) *FIPWT56 For Amada Style Holder
code Set PA203202S Punch Ass’y PA203202P Die Ass’y PA203202D P. Chip 8700069 = CE *FIP51am D. Chip 5511491 = CE *FID51am
COINING /Counter Sink Inserts/Chips For pre-pierce hole size, See chart/formula in Technical Reference booklet Section 1
CE
B
C
.6320
CE Style Insert *FIP56 $84.30 Ø.500
.50
WT
BC
WT Style Insert *FIPWT56 $84.30
C
B
D
A
NO ROLL-OVER
PRE-PUNCHHOLE
HRECOMMENDED IF "H" ISTHICKER THAN MATERIAL
Ø.472
.58
AMADA
B
Amada Style Chip #43114
CE#*FIP56AM $84.30
EMBOSS & EXTRUSION
A
B
CD=ANGLE
.500 MAX.
CEB
Dedicated die is suggested over
Form Up
AT Shown, similar available for ST/AS in Sta.½ or 5/8
CE TOOLING
Section-3 Page 34 Mar-11
COLE ENGINEERED
1¼ Sta.B Double
Row
1¼ Sta.B Single
Row
3½Sta.D Double
Row
FORM UP FORM DOWN
3½Sta.D Single Row
SET *FATD-SSU *FATD-SSD PUNCH *FATD-SPU *FATD-SPD
Cartridge *FATD-SCU *FATD-SCD Die Complete *FATD-SDU ATD-D-S-0
2”Sta.C Single Row
SET *FATC-SSU *FATC-SSD PUNCH *FATC-SPU *FATC-SPD
Cartridge *FATC-SCU *FATC-SCD Die w/C *FATC-SDU ATC-D-S-0
SET *FATC-SDU *FATC-SDD PUNCH *FATC-DPU *FATC-DPD
Cartridge *FATC-DCU *FATC-DCD
Die w/C *FATC-DDU ATC-D-S-0
Catalog Price Catalog Price SET *FATB-SSU *FATB-SSD
PUNCH *FATB-SPU *FATB-SPD Cartridge N/A *FATB-SCD
Die Complete *FATB-SDU *FATB-SDD
SET *FATB-DSU *FATB-DSD
PUNCH *FATB-DPU *FATB-DPD
Die *FATB-DDU ATB-D-s-0
SET *FATD-DSU *FATD-DSD PUNCH *FATD-DPU *FATD-DPD
Cartridge *FATD-DCU *FATD-DCD Die Complete *FATD-DDU ATD-D-S-0
2”Sta.C Double
Row
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8
Qty Per Row 20 12 10 6 20 12 10
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16
Qty Per Row 20 12 10 6 20 12 10 6
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 48 31 24 16 50 32 25 16
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 32 20 16 10 32 21 16 10
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 32 20 16 10 32 20 16 10
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 48 31 24 16 50 32 25 16
4½Sta.E
Single Row
SET *FATE-SSU *FATE-SSD
PUNCH *FATE-SPU *FATE-SPD
Cartridge *FATE-SCU *FATE-SCD
Die w/C *FATE-SDU ATE-D-S-0
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 20 12 10 6 16 10 8 5
4½”Sta. E Double
Row
SET *FATE-DSU *FATE-DSD
PUNCH *FATE-DPU *FATE-DPD
Cartridge *FATE-DCU *FATE-DCD
Die w/C *FATE-DDU ATE-D-S-0
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 20 12 10 6 16 10 8 5
FORM UP Keyed 0 & 180°
FORM UP Keyed 4plc.
CHARACTER MARKING TOOLS
Accessories: Plunger Screws *ACHLOCKB Cartridge Lock
Small *AchlockA Large *AchlockB
Ball Plunger *ASSPLG
FORM DOWN Rotate Cartridge for 4 way positioning
Dwg:Holder-F/ATBFP L10-13
FORM DOWN Rotate Cartridge for Extra Keying
Dwg:Holder-F/ATBFP L6-7
Dwg:Holder-F/ATCPCSB L8-13
Dwg:Holder-F/ATCFULSD L8-10
& 15-18 P.QS L11-13
Die-Shell *AATCDCHSH Die Shell–Stripper *AATCDCHSHS
DEDICATED MARKING UNITS Produced to stamp Logo’s, Names, Part No., etc.. Contact our tooling engineers to discuss your particular application. Camera Ready Art
Work or Cad-.DXF/.IGES files are required for Logo’s. Dedicated form tools can be produced to stamp Logo’s, Names, Part No., etc..
SHARP FACE CHARACTER STAMP INSERT HOLDERS Available 1/16, 3/32, 1/8, & 3/16 width X ¼ height. 1/8 is standard blanks/spacers cost = 50% to
regular character price 1/8 *ACHAR⅛ stamps .09X.15 1/16 *ACHAR1/16 stamps .06X.12” • 5/32 *ACHAR5/32 stamps .125”X.19”, 3/16 *ACHAR3/16 stamps.156X.23 Spacer Kit I*ASPACER includes widths of: 4 each 1/16, 3/32,⅛, 2 pcs 3/16
Lengths: CE & Amada Standard Character Length=.875” WT=.750” (WT old style length=.572” Insert) Note: Units to hold other than .875” character lengths, example .75” or .572” have a $45-$95 adder.
FORM DOWN Keyed 4 plc.
Mar-11 Section-3 Page 35
COLE ENGINEERED
SPECIAL SHAPED TOOLS SHIP IN 1-5 WORK DAYS Standard Delivery is 3-5 work days. Expedite Guarantee 3 days, +10%, 2 days +30%, 1 day, +50%
NOTE: Ar, Br, Cr, means a radius value is requested. Further, a .015” Radius is always recommended on corners less than 90 degrees.
ADIA.
SP-1 SINGLE "D" SP-2STD SHAPE PRICE
SP-3 HEXAGON
A
STD SHAPEPRICE
SP-7 SP-8
SP-9 SP-10
SP-4
SP-16SP-15SP-14SP-13
KEYWAY (1)
KEYWAY (2) KEYHOLE (1) KEYHOLE (2) KEYHOLE (4)
ADIA. A
A
DIA.
DIA.
C
BC
CB
CB
OCTAGON SP-5 SP-6
SP-12SP-11 SP-17
SP-18
KEYWAY (4)
TEARDROP
A
A
r1r2
A
Br1
r22X
2X
B
A
r1
r2
r3
r4
D
Cr
E Ar
B
SP-19 SP-25SP-20 SP-21
SP-27
SP-26
C
Ar
B
C
B
Ar
ADIA.
B
C
A
B
A
B
Dr
AG
B
D
FrErC CC
SP-31
SP-37 SP-38 SP-39 SP-40
SP-34SP-33SP-32SP-28
SP-22 SP-23 SP-24
SP-30SP-29 SP-35
SP-36 SP-41 SP-42
SP-48SP-47SP-46SP-45
SP-44SP-43
A
B
C
A
B
C
A
B
D
C
A
B
DC
A B
D
C
B
A
C
D
A B
B
AC
r1r2
A
C
TO APEX
TO APEX
B
RECOMMEND.015 RAD ON ALLCORNERS
C
Ar
Br
Ar
Br
C
C
B
r
ADIA.
A DIA.
B
C
C
A
B
D
A
CB
D
A
B C
D
Er
FrEr
Er
A
B
D
A
B
DB TYP
A TYPC
C
45DEG
A
C
r
A
B
C
D
r
A
BC
D
r1
r2
A
C
B
D
A
B
C
AB
C
D E F
A
Br1r2
A
B
Cr
A
B
C
D
r WEB THICKNESS
RADIUS6 BLEEDOPTIONAL
ABr1
r2
AB
D
C
r1r2
B
A
C
SP-50 SP-51 SP-53 SP-54SP-49
B
A
90 B
A
90
B r1
AR1
R2
R3
60
45
75
NOTE:
For use in Auto Index.
A B
30, 60, 90 Degree STD SHAPEPRICE
A A
A A A A
A A A A A A A A
B B
B B B B C C C B C
C B B
B
DCBBBBB B B
B D D BB B B
B D
C
C
For use in Auto Index.
SP-8 KEYWAY (1)
ADIA.
C
B B
B
CL CL
B
Bow Tie
THICK TURRET TOOLING ADD ON’S ADDITIONAL COSTS FOR TOOL OPTIONS A B C D E PUNCH: Additional Key Locations 45º Increments Sta. A & B: 45º & 180º increments only PUNCH: Shapes on Angles No charge for 45º Inc. PUNCH COATING TiN Titanium Nitride/GOLD or PUNCH COATING TiNC Titanium Carbo Nitride/blue-gray PUNCH: Tip size diameter or width .063-.092 PUNCH: Tip size diameter or width .032-.062 PUNCH: Tip size diameter or width .016-.031 PUNCH: Tip size diameter or diagonal under station range by more than 17.5% GUIDE: Additional Keys Ref. Standard Keying for shapes is 0 & 90º, SQ 0 & 45º GUIDE: Non-Fitted Round Opening instead of being fitted to shape. GUIDE: Shapes on Angles GUIDE: Sizes of Rounds or Shaped Widths .063-.092 GUIDE: Sizes of Rounds or Shaped Width .032-.062 DIE: Additional Key Locations 45º Increments DIE: Additional Key Locations other than 45º Increments DIE: Shapes on Angles No charge for 45º Inc. DIE: Sizes of Rounds or Shaped Widths .063-.092 DIE: Sizes of Rounds or Shaped Width .032-.062 DIE: Sizes of Rounds or Shaped Width .016-.031
Section-3 Page 36 Mar-11
COLE ENGINEERED
BRAKE