aluminum hydroxide - beaming.com.t · aluminum hydroxide (m010) true density： 2.42...
TRANSCRIPT
Aluminum Hydroxide
(M010) True Density： 2.42
Specification： Al(OH)3 99.7 % Min
Moisture 0.55 % Max
Fe2O3 0.01 % Max
SiO2 0.01 % Max
Soluble-Na2O 0.02 % Max
Total-Na2O 0.25 % Max
L.O.I. 33.3～34.9 %
pH (10wt%) 8~10
Specific Surface Area 4.0~6.0 m2/g
Oil Absorption 29 ml/100g Ave.
Whiteness 97 % Min
Median Particle Size 0.9~1.3 µm
Bulk Density(Tapped) 0.5 g/cm3 Ave.
Uses： -Flame retardant filler for rubber, polyvinyl chloride, epoxy, unsaturated polyester, polyurethane, and polyolefin resins. -Pigment for coated paper, and filler for retardant paper. -Additives for adhesives, daub and paint.
Packing: 25 kgs net packed in paper bag.
The Beaming Co., Ltd.
Office：8F., No. 168, Song Jiang Road, Taipei, Taiwan.
Tel：886-2-25219262 Fax：886-2-25215180 E-mail： [email protected] Website：www.beaming.com.tw
If you have other requirements, please
contact us.
The only ATH manufacturer in Taiwan.
Products
Safety and Environmental Protection as Beaming's
Managerial Responsibilities Aug. 2015