alojamento frontal do motor

Shutdown SIS

Previous Screen

Product: EXCAVATOR

Model: 336D L EXCAVATOR M4T01073

Configuration: 336D L Excavators M4T00001-UP (MACHINE) POWERED BY C9 Engine

SpecificationsC9 Engines for Caterpillar Built Machines

Media Number -SENR9829-23 Publication Date -01/04/2012 Date Updated -18/04/2012

i03022142

Front Housing and Covers

SMCS - 1162; 1166

S/N - 5111-UP

S/N - 5221-UP

S/N - 5321-UP

S/N - 5411-UP

S/N - 5511-UP

S/N - 5521-UP

S/N - A6M1-UP

S/N - B6H1-UP

S/N - B9D1-UP

S/N - B9E1-UP

S/N - B9G1-UP

S/N - B9L1-UP

S/N - B9M1-UP

S/N - B9T1-UP

S/N - BXG1-UP

S/N - BYN1-UP

S/N - BZR1-UP

Página 1 de 6336D L Excavators M4T00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...

19/08/2013https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe...

S/N - C5K1-UP

S/N - C6Z1-UP

S/N - D3D1-UP

S/N - D6R1-UP

S/N - D9G1-UP

S/N - D9T1-UP

S/N - DBZ1-UP

S/N - DEX1-UP

S/N - DEY1-UP

S/N - DJG1-UP

S/N - DJR1-UP

S/N - DLM1-UP

S/N - DLN1-UP

S/N - DMK1-UP

S/N - DPS1-UP

S/N - DSH1-UP

S/N - ERN1-UP

S/N - F7B1-UP

S/N - F7C1-UP

S/N - F7G1-UP

S/N - GCT1-UP

S/N - GGE1-UP

S/N - GJB1-UP

S/N - GMT1-UP

S/N - HAS1-UP

S/N - HDC1-UP

S/N - HKE1-UP

S/N - J2F1-UP



S/N - J6D1-UP

S/N - JBT1-UP

S/N - JDL1-UP

S/N - JHB1-UP

S/N - JLP1-UP

S/N - JRX1-UP

S/N - JTN1-UP

S/N - JWD1-UP

S/N - KDJ1-UP

S/N - KJL1-UP

S/N - KKT1-UP

S/N - L5X1-UP

S/N - LAE1-UP

S/N - LAY1-UP

S/N - LBD1-UP

S/N - LCP1-UP

S/N - LDX1-UP

S/N - LEM1-UP

S/N - LFM1-UP

S/N - LKJ1-UP

S/N -M4T1-UP

S/N -MDS1-UP

S/N -MEY1-UP

S/N -MPL1-UP

S/N -MRT1-UP

S/N -MTJ1-UP

S/N -MWP1-UP



S/N -MYP1-UP

S/N - NBD1-UP

S/N - PEL1-UP

S/N - PEZ1-UP

S/N - PRF1-UP

S/N - R2D1-UP

S/N - RAS1-UP

S/N - RFC1-UP

S/N - RLW1-UP

S/N - S6T1-UP

S/N - S6X1-UP

S/N - S6Y1-UP

S/N - SKL1-UP

S/N - SMC1-UP

S/N - T2Y1-UP

S/N - TBC1-UP

S/N - THJ1-UP

S/N -W3K1-UP

S/N -WCB1-UP

S/N -WCG1-UP

S/N -WET1-UP

S/N -WFH1-UP

S/N -WRG1-UP

S/N - ZEB1-UP

S/N - ZML1-UP



Illustration 1 g01527834

(1) Cylinder block

(2) Front housing

Note: Apply 1U-8846 Gasket Sealant to the front housing sealing surfaces before assembling the front housing to the cylinder block. The front housing must be assembled and the front housing must be tightened to the cylinder block within ten minutes.

(3) Use eight bolts of M8 x 1.25 - 0.79 inch.

(4) Use four bolts ofM8 x 1.25 - 1.97 inch.



Illustration 2 g01527833

(5) Front housing cover

(6) Use twelve bolts of M8 x 1.25 - 1.18 inch.

(7) Use two bolts of M8 x 1.25 - 2.36 inch.

(8) Apply 154-9731 Thread Lock Compound to the serrations of the studs before installing the studs into the front housing cover (5).

Copyright 1993 - 2013 Caterpillar Inc.

All Rights Reserved.

Private Network For SIS Licensees.

Mon Aug 19 09:36:49 UTC-0300 2013



alojamento frontal do motor

Documents